aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAge
* PXA: Use dev_pm_ops in z2_batteryMarek Vasut2011-05-20
| | | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
* ds2760_battery: Fix rated capacity of the hx4700 1800mAh batteryPaul Parsons2011-05-20
| | | | | | | Fix rated capacity of the HP iPAQ hx4700 3.7V 1800mAh (359113-001) battery. For this battery the value of the rated capacity EEPROM register at 0x32 is 7; thus rated_capacities[7] = 1800. Signed-off-by: Paul Parsons <lost.distance@yahoo.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
* ds2760_battery: Fix indexing of the 4 active full EEPROM registersPaul Parsons2011-05-20
| | | | | | | Fix indexing of the 4 active full EEPROM registers. The indexing was out by 1, accessing the EEPROM registers at 0x23 to 0x26 instead of 0x22 to 0x25. Signed-off-by: Paul Parsons <lost.distance@yahoo.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
* power: Make test_power driver more dynamic.John Stultz2011-05-20
| | | | | | | | | | | | | | | | | | | | | | | | In 2008 Masashi YOKOTA <yokota@pylone.jp> created the virtual battery driver found here: http://downloads.pylone.jp/src/virtual_battery/virtual_battery-0.0.1.tar.bz2 It found use out of tree, but was never merged upstream. Since then the test_power driver has been merged, which provides very similar functionality. This patch extends the test_power driver to be more dynamic at runtime, by merging portions of the Virtual Battery Driver by Masashi YOKOTA. With this patch, I can tweak the values in: /sys/module/test_power/parameters/* and watch the behavior of the gnome power managment daemon or other battery UI software. CC: Anton Vorontsov <cbouatmailru@gmail.com> CC: Akihiro MAEDA <sola.1980.a@gmail.com> CC: Masashi YOKOTA <yokota@pylone.jp> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
* bq27x00_battery: Name of cycle count propertyPali Rohár2011-05-20
| | | | | | | | | This patch fix using correct property POWER_SUPPLY_PROP_CYCLE_COUNT for cycle count instead POWER_SUPPLY_PROP_CHARGE_COUNTER Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Tested-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
* max8903_charger: Add GENERIC_HARDIRQS as a dependency (fixes S390 build)Anton Vorontsov2011-04-21
| | | | | | | | | | | | | | | S390 is special as it doesn't have IRQ lines, so these errors pop up: drivers/built-in.o: In function 'max8903_remove': drivers/power/max8903_charger.c:355: undefined reference to 'free_irq' drivers/power/max8903_charger.c:357: undefined reference to 'free_irq' drivers/power/max8903_charger.c:359: undefined reference to 'free_irq' This commit fixes the issue by making the driver depend on GENERIC_HARDIRQS feature. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
* ARM: RX-51: Enable isp1704 power on/offKalle Jokiniemi2011-04-20
| | | | | | | | | | | | | | | | | | | The isp1704 usb tranceiver is used for charging and can be disabled when not in use. Provide the powering routine to the driver via platform data. Also changed the indent of ".name" variable in rx51_charger_device definition to use tabs same way as the new ".dev" variable indent. Put this in the same patch since the indent fix is only needed when there are multiple members in the struct definition. Loosely based on earlier patches from Heikki Krogerus in Nokia N900 maemo kernel. Signed-off-by: Kalle Jokiniemi <kalle.jokiniemi@nokia.com> Acked-By: Heikki Krogerus <heikki.krogerus@nokia.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
* isp1704_charger: Allow board specific powering routineKalle Jokiniemi2011-04-20
| | | | | | | | | | | | | | | | The ISP1704/1707 chip can be put to full power down state by asserting the CHIP_SEL line. This patch enables platform or board specific hooks to put the device into power down mode in case not needed. This patch is a preparation for enabling this powering routine in n900 (rx-51) devices. Thanks to Heikki Krogerus for helping out with the patch. Signed-off-by: Kalle Jokiniemi <kalle.jokiniemi@nokia.com> Acked-By: Heikki Krogerus <heikki.krogerus@nokia.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
* gpio-charger: Add gpio_charger_resumeBenson Leung2011-04-20
| | | | | | | | | | | Gpio charger should notify if the gpio state had changed during suspend. This will send a CHANGED event each time the system resumes, ensuring a plug/unplug of the charger is not missed. Signed-off-by: Benson Leung <bleung@chromium.org> Acked-By: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
* power_supply: Add driver for MAX8903 chargerMyungJoo Ham2011-04-20
| | | | | | | | | | | | | MAX8903 is an integrated battery charger and selector with two power inputs (USB and AC adapter). This driver enables the charger, handles interrupts, and provides power-supply-class information to userland. Tested on Exynos4 NURI / S5PC210 SLP7 boards. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
* Linux 2.6.39-rc4Linus Torvalds2011-04-19
|
* Merge branch 'for-39-rc4' of git://codeaurora.org/quic/kernel/davidb/linux-msmLinus Torvalds2011-04-18
|\ | | | | | | | | | | * 'for-39-rc4' of git://codeaurora.org/quic/kernel/davidb/linux-msm: msm: timer: fix missing return value msm: Remove extraneous ffa device check
| * msm: timer: fix missing return valueDavid Brown2011-03-31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Change af90f10d38 "ARM: 6759/1: smp: Select local timers vs broadcast timer support runtime" missed a return statement, causing a compile warning: arch/arm/mach-msm/timer.c:272: warning: 'return' with no value, in function returning non-void Trivially return 0 for success when running on cpu 0 (to match the comment and previous behavior). Signed-off-by: David Brown <davidb@codeaurora.org>
| * msm: Remove extraneous ffa device checkDavid Brown2011-03-31
| | | | | | | | | | | | | | | | | | | | | | The qsd8x50 board file contains a few references to machine_is_... macros that are otherwise unused, and contain no machine definition. The recent purge of unused machine definitions breaks the compilation of this target. Since the machine cannot ever be used, just remove the bogus checks. Signed-off-by: David Brown <davidb@codeaurora.org>
* | Merge branch 'for-linus' of ↵Linus Torvalds2011-04-18
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: xen-kbdfront - fix mouse getting stuck after save/restore Input: estimate number of events per packet Input: evdev - indicate buffer overrun with SYN_DROPPED Input: document event types and codes and their intended use Input: add KEY_IMAGES specifically for AL Image Browser Input: twl4030_keypad - fix potential NULL dereference in twl4030_kp_probe() Input: h3600_ts - fix error handling at connect Input: twl4030_keypad - avoid potential NULL-pointer dereference
| * | Input: xen-kbdfront - fix mouse getting stuck after save/restoreIgor Mammedov2011-04-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Mouse gets "stuck" after restore of PV guest but buttons are in working condition. If driver has been configured for ABS coordinates at start it will get XENKBD_TYPE_POS events and then suddenly after restore it'll start getting XENKBD_TYPE_MOTION events, that will be dropped later and they won't get into user-space. Regression was introduced by hunk 5 and 6 of 5ea5254aa0ad269cfbd2875c973ef25ab5b5e9db ("Input: xen-kbdfront - advertise either absolute or relative coordinates"). Driver on restore should ask xen for request-abs-pointer again if it is available. So restore parts that did it before 5ea5254. Acked-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: Igor Mammedov <imammedo@redhat.com> [v1: Expanded the commit description] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
| * | Input: estimate number of events per packetJeff Brown2011-04-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | Calculate a default based on the number of ABS axes, REL axes, and MT slots for the device during input device registration. Signed-off-by: Jeff Brown <jeffbrown@android.com> Reviewed-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
| * | Input: evdev - indicate buffer overrun with SYN_DROPPEDJeff Brown2011-04-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a new EV_SYN code, SYN_DROPPED, to inform the client when input events have been dropped from the evdev input buffer due to a buffer overrun. The client should use this event as a hint to reset its state or ignore all following events until the next packet begins. Signed-off-by: Jeff Brown <jeffbrown@android.com> [dtor@mail.ru: Implement Henrik's suggestion and drop old events in case of overflow.] Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
| * | Input: document event types and codes and their intended useChase Douglas2011-04-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds the file Documentation/input/event-codes.txt. Acked-by: Henrik Rydberg <rydberg@euromail.se> Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Chase Douglas <chase.douglas@canonical.com> Signed-off-by: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
| * | Input: add KEY_IMAGES specifically for AL Image BrowserJarod Wilson2011-04-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Many media center remotes have buttons intended for jumping straight to one type of media browser or another -- commonly, images/photos/pictures, audio/music, television, and movies. At present, remotes with an images or photos or pictures button use any number of different keycodes which sort of maybe fit. I've seen at least KEY_MEDIA, KEY_CAMERA, KEY_GRAPHICSEDITOR and KEY_PRESENTATION. None of those seem quite right. In my mind, KEY_MEDIA should be something more like a media center application launcher (and I'd like to standardize on that for things like the windows media center button on the mce remotes). KEY_CAMERA is used in a lot of webcams, and typically means "take a picture now". KEY_GRAPHICSEDITOR implies an editor, not a browser. KEY_PRESENTATION might be the closest fit here, if you think "photo slide show", but it may well be more intended for "run application in full-screen presentation mode" or to launch something like magicpoint, I dunno. And thus, I'd like to have a KEY_IMAGES, which matches the HID Usage AL Image Browser, the meaning of which I think is crystal-clear. I believe AL Audio Browser is already covered by KEY_AUDIO, and AL Movie Browser by KEY_VIDEO, so I'm also adding appropriate comments next to those keys. Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
| * | Input: twl4030_keypad - fix potential NULL dereference in twl4030_kp_probe()Axel Lin2011-04-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | We should first check whether platform data is NULL or not, before dereferencing it to get the keymap. Signed-off-by: Axel Lin <axel.lin@gmail.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
| * | Input: h3600_ts - fix error handling at connectChristoph Fritz2011-04-06
| | | | | | | | | | | | | | | | | | | | | | | | In case of an error in h3600ts_connect(), deconstruct in correct order and with the right calls. Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
| * | Input: twl4030_keypad - avoid potential NULL-pointer dereferenceShubhrajyoti D2011-04-06
| | | | | | | | | | | | | | | | | | Signed-off-by: Shubhrajyoti D <a0393217@india.ti.com> Acked-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
* | | Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds2011-04-18
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-linus' of git://git.kernel.dk/linux-2.6-block: block: add blk_run_queue_async block: blk_delay_queue() should use kblockd workqueue md: fix up raid1/raid10 unplugging. md: incorporate new plugging into raid5. md: provide generic support for handling unplug callbacks. md - remove old plugging code. md/dm - remove remains of plug_fn callback. md: use new plugging interface for RAID IO. block: drop queue lock before calling __blk_run_queue() for kblockd punt Revert "block: add callback function for unplug notification" block: Enhance new plugging support to support general callbacks
| * | | block: add blk_run_queue_asyncChristoph Hellwig2011-04-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Instead of overloading __blk_run_queue to force an offload to kblockd add a new blk_run_queue_async helper to do it explicitly. I've kept the blk_queue_stopped check for now, but I suspect it's not needed as the check we do when the workqueue items runs should be enough. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
| * | | block: blk_delay_queue() should use kblockd workqueueJens Axboe2011-04-18
| | | | | | | | | | | | | | | | | | | | Reported-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
| * | | md: fix up raid1/raid10 unplugging.NeilBrown2011-04-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We just need to make sure that an unplug event wakes up the md thread, which is exactly what mddev_check_plugged does. Also remove some plug-related code that is no longer needed. Signed-off-by: NeilBrown <neilb@suse.de>
| * | | md: incorporate new plugging into raid5.NeilBrown2011-04-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In raid5 plugging is used for 2 things: 1/ collecting writes that require a bitmap update 2/ collecting writes in the hope that we can create full stripes - or at least more-full. We now release these different sets of stripes when plug_cnt is zero. Also in make_request, we call mddev_check_plug to hopefully increase plug_cnt, and wake up the thread at the end if plugging wasn't achieved for some reason. Signed-off-by: NeilBrown <neilb@suse.de>
| * | | md: provide generic support for handling unplug callbacks.NeilBrown2011-04-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When an md device adds a request to a queue, it can call mddev_check_plugged. If this succeeds then we know that the md thread will be woken up shortly, and ->plug_cnt will be non-zero until then, so some processing can be delayed. If it fails, then no unplug callback is expected and the make_request function needs to do whatever is required to make the request happen. Signed-off-by: NeilBrown <neilb@suse.de>
| * | | md - remove old plugging code.NeilBrown2011-04-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | md has some plugging infrastructure for RAID5 to use because the normal plugging infrastructure required a 'request_queue', and when called from dm, RAID5 doesn't have one of those available. This relied on the ->unplug_fn callback which doesn't exist any more. So remove all of that code, both in md and raid5. Subsequent patches with restore the plugging functionality. Signed-off-by: NeilBrown <neilb@suse.de>
| * | | md/dm - remove remains of plug_fn callback.NeilBrown2011-04-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that unplugging is done differently, the unplug_fn callback is never called, so it can be completely discarded. Signed-off-by: NeilBrown <neilb@suse.de>
| * | | md: use new plugging interface for RAID IO.NeilBrown2011-04-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | md/raid submits a lot of IO from the various raid threads. So adding start/finish plug calls to those so that some plugging happens. Signed-off-by: NeilBrown <neilb@suse.de>
| * | | block: drop queue lock before calling __blk_run_queue() for kblockd puntJens Axboe2011-04-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If we know we are going to punt to kblockd, we can drop the queue lock before calling into __blk_run_queue() since it only does a safe bit test and a workqueue call. Since kblockd needs to grab this very lock as one of the first things it does, it's a good optimization to drop the lock before waking kblockd. Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
| * | | Revert "block: add callback function for unplug notification"Jens Axboe2011-04-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | MD can't use this since it really requires us to be able to keep more than a single piece of state for the unplug. Commit 048c9374 added the required support for MD, so get rid of this now unused code. This reverts commit f75664570d8b75469cc468f23c2b27220984983b. Conflicts: block/blk-core.c Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
| * | | block: Enhance new plugging support to support general callbacksNeilBrown2011-04-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | md/raid requires an unplug callback, but as it does not uses requests the current code cannot provide one. So allow arbitrary callbacks to be attached to the blk_plug. Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
* | | | Merge branch 'merge' of ↵Linus Torvalds2011-04-18
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/powermac: Build fix with SMP and CPU hotplug powerpc/perf_event: Skip updating kernel counters if register value shrinks powerpc: Don't write protect kernel text with CONFIG_DYNAMIC_FTRACE enabled powerpc: Fix oops if scan_dispatch_log is called too early powerpc/pseries: Use a kmem cache for DTL buffers powerpc/kexec: Fix regression causing compile failure on UP powerpc/85xx: disable Suspend support if SMP enabled powerpc/e500mc: Remove CPU_FTR_MAYBE_CAN_NAP/CPU_FTR_MAYBE_CAN_DOZE powerpc/book3e: Fix CPU feature handling on 64-bit e5500 powerpc: Check device status before adding serial device powerpc/85xx: Don't add disabled PCIe devices
| * | | | powerpc/powermac: Build fix with SMP and CPU hotplugBenjamin Herrenschmidt2011-04-18
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * | | | powerpc/perf_event: Skip updating kernel counters if register value shrinksEric B Munson2011-04-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Because of speculative event roll back, it is possible for some event coutners to decrease between reads on POWER7. This causes a problem with the way that counters are updated. Delta calues are calculated in a 64 bit value and the top 32 bits are masked. If the register value has decreased, this leaves us with a very large positive value added to the kernel counters. This patch protects against this by skipping the update if the delta would be negative. This can lead to a lack of precision in the coutner values, but from my testing the value is typcially fewer than 10 samples at a time. Signed-off-by: Eric B Munson <emunson@mgebm.net> Cc: stable@kernel.org Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * | | | powerpc: Don't write protect kernel text with CONFIG_DYNAMIC_FTRACE enabledStefan Roese2011-04-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This problem was noticed on an MPC855T platform. Ftrace did oops when trying to write to the kernel text segment. Many thanks to Joakim for finding the root cause of this problem. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Joakim Tjernlund <joakim.tjernlund@transmode.se> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * | | | powerpc: Fix oops if scan_dispatch_log is called too earlyAnton Blanchard2011-04-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We currently enable interrupts before the dispatch log for the boot cpu is setup. If a timer interrupt comes in early enough we oops in scan_dispatch_log: Unable to handle kernel paging request for data at address 0x00000010 ... .scan_dispatch_log+0xb0/0x170 .account_system_vtime+0xa0/0x220 .irq_enter+0x88/0xc0 .do_IRQ+0x48/0x230 The patch below adds a check to scan_dispatch_log to ensure the dispatch log has been allocated. Signed-off-by: Anton Blanchard <anton@samba.org> Cc: <stable@kernel.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * | | | powerpc/pseries: Use a kmem cache for DTL buffersNishanth Aravamudan2011-04-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PAPR specifies that DTL buffers can not cross AMS environments (aka CMO in the PAPR) and can not cross a memory entitlement granule boundary (4k). This is found in section 14.11.3.2 H_REGISTER_VPA of the PAPR. kmalloc does not guarantee an alignment of the allocation, though, beyond 8 bytes (at least in my understanding). Create a special kmem cache for DTL buffers with the alignment requirement. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * | | | powerpc/kexec: Fix regression causing compile failure on UPPaul Gortmaker2011-04-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Recent commit b987812b3fcaf70fdf0037589e5d2f5f2453e6ce caused a compile failure on UP because a considerably large block of the file was included within CONFIG_SMP, hence making a stub function not exposed on UP builds when it needed to be. Relocate the stub to the #else /* ! CONFIG_SMP */ section and also annotate the relevant else/endif so that nobody else falls into the same trap I did. Reported-by: Michael Guntsche <mike@it-loops.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * | | | Merge remote branch 'kumar/merge' into mergeBenjamin Herrenschmidt2011-04-17
| |\ \ \ \ | | |/ / / | |/| | |
| | * | | powerpc/85xx: disable Suspend support if SMP enabledKumar Gala2011-04-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We currently dont have CPU Hotplug support working on 85xx so we need to disable Suspsend support as it will force enabling of CPU Hotplug. arch/powerpc/kernel/built-in.o: In function `cpu_die': arch/powerpc/kernel/smp.c:702: undefined reference to `start_secondary_resume' make: *** [.tmp_vmlinux1] Error 1 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| | * | | powerpc/e500mc: Remove CPU_FTR_MAYBE_CAN_NAP/CPU_FTR_MAYBE_CAN_DOZEScott Wood2011-04-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | e500mc does not support the HID0/MSR mechanism that is used by e500_idle (and there are also issues with waking on certain types of interrupts). Further, even if napping is never actually enabled, just having CPU_FTR_CAN_NAP will cause machine_init() to overwrite the board's supplied ppc_md.power_save(). We drop CPU_FTR_MAYBE_CAN_DOZE becuase we should use 'wait' instead on e500mc. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| | * | | powerpc/book3e: Fix CPU feature handling on 64-bit e5500Kumar Gala2011-04-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The CPU_FTRS_POSSIBLE and CPU_FTRS_ALWAYS defines did not encompass e5500 CPU features when built for 64-bit. This causes issues with cpu_has_feature() as it utilizes the POSSIBLE & ALWAYS defines as part of its check. Create a unique CPU_FTRS_E5500 (as its different from CPU_FTRS_E500MC), created a new group for 64-bit Book3e based CPUs and add CPU_FTRS_E5500 to that group. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| | * | | powerpc: Check device status before adding serial devicePrabhakar Kushwaha2011-04-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | serial port nodes with the property status="disabled" are not usable and so avoid adding "disabled" port with the system. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| | * | | powerpc/85xx: Don't add disabled PCIe devicesPrabhakar Kushwaha2011-04-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PCIe nodes with the property status="disabled" are not usable and so avoid adding "disabled" PCIe bridge with the system. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | | | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstableLinus Torvalds2011-04-18
|\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: (24 commits) Btrfs: fix free space cache leak Btrfs: avoid taking the chunk_mutex in do_chunk_alloc Btrfs end_bio_extent_readpage should look for locked bits Btrfs: don't force chunk allocation in find_free_extent Btrfs: Check validity before setting an acl Btrfs: Fix incorrect inode nlink in btrfs_link() Btrfs: Check if btrfs_next_leaf() returns error in btrfs_real_readdir() Btrfs: Check if btrfs_next_leaf() returns error in btrfs_listxattr() Btrfs: make uncache_state unconditional btrfs: using cached extent_state in set/unlock combinations Btrfs: avoid taking the trans_mutex in btrfs_end_transaction Btrfs: fix subvolume mount by name problem when default mount subvolume is set fix user annotation in ioctl.c Btrfs: check for duplicate iov_base's when doing dio reads btrfs: properly handle overlapping areas in memmove_extent_buffer Btrfs: fix memory leaks in btrfs_new_inode() Btrfs: check for duplicate iov_base's when doing dio reads Btrfs: reuse the extent_map we found when calling btrfs_get_extent Btrfs: do not use async submit for small DIO io's Btrfs: don't split dio bios if we don't have to ...
| * | | | | Btrfs: fix free space cache leakChris Mason2011-04-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The free space caching code was recently reworked to cache all the pages it needed instead of using find_get_page everywhere. One loop was missed though, so it ended up leaking pages. This fixes it to use our page array instead of find_get_page. Signed-off-by: Chris Mason <chris.mason@oracle.com>
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-14 20:21:06 -0500