aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAge
* ALSA: hda/realtek - Change EAPD to verb controlKailang Yang2014-11-12
| | | | | | | | | | | | | | | | | | | | | | | | This will fix no sound in Linux system after reboot from windows. Change log: - alc662_fill_coef() is replaced with alc_fill_eapd_coef_idx() and move into alc_auto_init_amp(). - For ALC262, ALC267, ALC268, ALC269, ALC233, ALC255, ALC280, ALC282, ALC283, ALC284, ALC285, ALC286, ALC288, ALC290, ALC292, ALC293, ALC294, ALC668, ALC888VC, ALC888VD, ALC891, ALC892, ALC898 and ALC1150, add update COEF control for EAPD setting. - Remove alc269_fill_coef() for update EAPD control line. ADDITIONAL NOTE: Many Realtek cdoecs have a COEF bit to switch the master amp control between COEF and EAPD. Windows drivers seem using COEF while we use EAPD, which is more standard. As a result, some system suffer from the silent output when booting after Windows. This patch sets the COEF bits on the relevant codecs properly to switch to EAPD control. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=87771 Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb-audio: Fix memory leak in FTU quirkTakashi Iwai2014-11-11
| | | | | | | | M-audio FastTrack Ultra quirk doesn't release the kzalloc'ed memory. This patch adds the private_free callback to release it properly. Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda_intel: Add DeviceIDs for Sunrise Point-LPDevin Ryles2014-11-08
| | | | | | | | This patch adds DeviceIDs for Sunrise Point-LP Signed-off-by: Devin Ryles <devin.ryles@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda/realtek - Restore default value for ALC668Kailang Yang2014-11-05
| | | | | | | | | Restore the registers to prevent the abnormal digital power supply rising ratio/sequence to the codec and causing the incorrect default codec register restoration during initialization. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb-audio: Fix device_del() sysfs warnings at disconnectTakashi Iwai2014-11-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some USB-audio devices show weird sysfs warnings at disconnecting the devices, e.g. usb 1-3: USB disconnect, device number 3 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 973 at fs/sysfs/group.c:216 device_del+0x39/0x180() sysfs group ffffffff8183df40 not found for kobject 'midiC1D0' Call Trace: [<ffffffff814a3e38>] ? dump_stack+0x49/0x71 [<ffffffff8103cb72>] ? warn_slowpath_common+0x82/0xb0 [<ffffffff8103cc55>] ? warn_slowpath_fmt+0x45/0x50 [<ffffffff813521e9>] ? device_del+0x39/0x180 [<ffffffff81352339>] ? device_unregister+0x9/0x20 [<ffffffff81352384>] ? device_destroy+0x34/0x40 [<ffffffffa00ba29f>] ? snd_unregister_device+0x7f/0xd0 [snd] [<ffffffffa025124e>] ? snd_rawmidi_dev_disconnect+0xce/0x100 [snd_rawmidi] [<ffffffffa00c0192>] ? snd_device_disconnect+0x62/0x90 [snd] [<ffffffffa00c025c>] ? snd_device_disconnect_all+0x3c/0x60 [snd] [<ffffffffa00bb574>] ? snd_card_disconnect+0x124/0x1a0 [snd] [<ffffffffa02e54e8>] ? usb_audio_disconnect+0x88/0x1c0 [snd_usb_audio] [<ffffffffa015260e>] ? usb_unbind_interface+0x5e/0x1b0 [usbcore] [<ffffffff813553e9>] ? __device_release_driver+0x79/0xf0 [<ffffffff81355485>] ? device_release_driver+0x25/0x40 [<ffffffff81354e11>] ? bus_remove_device+0xf1/0x130 [<ffffffff813522b9>] ? device_del+0x109/0x180 [<ffffffffa01501d5>] ? usb_disable_device+0x95/0x1f0 [usbcore] [<ffffffffa014634f>] ? usb_disconnect+0x8f/0x190 [usbcore] [<ffffffffa0149179>] ? hub_thread+0x539/0x13a0 [usbcore] [<ffffffff810669f5>] ? sched_clock_local+0x15/0x80 [<ffffffff81066c98>] ? sched_clock_cpu+0xb8/0xd0 [<ffffffff81070730>] ? bit_waitqueue+0xb0/0xb0 [<ffffffffa0148c40>] ? usb_port_resume+0x430/0x430 [usbcore] [<ffffffffa0148c40>] ? usb_port_resume+0x430/0x430 [usbcore] [<ffffffff8105973e>] ? kthread+0xce/0xf0 [<ffffffff81059670>] ? kthread_create_on_node+0x1c0/0x1c0 [<ffffffff814a8b7c>] ? ret_from_fork+0x7c/0xb0 [<ffffffff81059670>] ? kthread_create_on_node+0x1c0/0x1c0 ---[ end trace 40b1928d1136b91e ]--- This comes from the fact that usb-audio driver may receive the disconnect callback multiple times, per each usb interface. When a device has both audio and midi interfaces, it gets called twice, and currently the driver tries to release resources at the last call. At this point, the first parent interface has been already deleted, thus deleting a child of the first parent hits such a warning. For fixing this problem, we need to call snd_card_disconnect() and cancel pending operations at the very first disconnect while the release of the whole objects waits until the last disconnect call. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=80931 Reported-and-tested-by: Tomas Gayoso <tgayoso@gmail.com> Reported-and-tested-by: Chris J Arges <chris.j.arges@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - fix mute led problem for three HP laptopsHui Wang2014-11-05
| | | | | | | | | | | | | | | | | | | Without the fix, the mute led can't work on these three machines. After apply this fix, these three machines will fall back on the led control quirk as below, and through testing, the mute led works very well. PIN_QUIRK(0x10ec0282, 0x103c, "HP", ALC269_FIXUP_HP_LINE1_MIC1_LED, ALC282_STANDARD_PINS, {0x12, 0x90a60140}, ... BugLink: https://bugs.launchpad.net/bugs/1389497 Tested-by: TieFu Chen <tienfu.chen@canonical.com> Cc: Kailang Yang <kailang@realtek.com> Cc: stable@vger.kernel.org Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda/realtek - Update Initial AMP for EAPD controlKailang Yang2014-10-30
| | | | | | | | | | | | | | | | | | | | | | | | The default EAPD control uses verb command to control EAPD. Some codec does not have verb command for EAPD. It needs to control by hidden register. This update will avoid wrong behavior for some codec. This patch will fix double setup for EAPD. It just needs to turn on by one site for verb command or hidden register controlled. Detailed changes: - alc889_coef_init() is replaced with alc_update_coef_idx() with a correct COEF value. - for ALC262, ALC887 and ALC900, the EAPD setup via the hidden register is removed because this rather conflicts with the EAPD verb setup. - For ALC888-VC, also the hidden register access is removed in alc888_coef_init(). - Remove the dead #if 0 code for ALC267/ALC268. Signed-off-by: Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - change three SSID quirks to one pin quirkDavid Henningsson2014-10-30
| | | | | | | | These three HP machines all have the same pin config, so we can change it to a pin quirk. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Set GPIO 4 low for a few HP machinesDavid Henningsson2014-10-30
| | | | | | | | | | | These HP machines needs GPIO 4 low to enable the headphone amplifier. In addition, we still need to control LEDs via vref and GPIO. Cc: stable@vger.kernel.org BugLink: https://bugs.launchpad.net/bugs/1387128 Tested-by: TienFu Chen <tienfu.chen@canonical.com> Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Add ultra dock support for Thinkpad X240.Lukas Bossard2014-10-30
| | | | | | | | | Adding ultra doch support for Lenovo Thinkpad X240 (17aa:2214). [Actually replaced the entry with ALC292_FIXUP_TPT440_DOCK -- tiwai] Signed-off-by: Lukas Bossard <mr.bobukas@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Add workaround for CMI8888 snoop behaviorTakashi Iwai2014-10-29
| | | | | | | | | | | | | | CMI8888 shows the stuttering playback when the snooping is disabled on the audio buffer. Meanwhile, we've got reports that CORB/RIRB doesn't work in the snooped mode. So, as a compromise, disable the snoop only for CORB/RIRB and enable the snoop for the stream buffers. The resultant patch became a bit ugly, unfortunately, but we still can live with it. Reported-and-tested-by: Geoffrey McRae <geoff@spacevs.com> Cc: <stable@vger.kernel.org> # 3.17+ Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: pcm: Zero-clear reserved fields of PCM status ioctl in compat modeTakashi Iwai2014-10-28
| | | | | | | | | | | In compat mode, we copy each field of snd_pcm_status struct but don't touch the reserved fields, and this leaves uninitialized values there. Meanwhile the native ioctl does zero-clear the whole structure, so we should follow the same rule in compat mode, too. Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: bebob: Uninitialized id returned by saffirepro_both_clk_src_getChristian Vogel2014-10-27
| | | | | | | | | | | | | | | snd_bebob_stream_check_internal_clock() may get an id from saffirepro_both_clk_src_get (via clk_src->get()) that was uninitialized. a) make logic in saffirepro_both_clk_src_get explicit b) test if id used in snd_bebob_stream_check_internal_clock matches array size [fixed missing signed prefix to *_maps[] by tiwai] Signed-off-by: Christian Vogel <vogelchr@vogel.cx> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* Merge tag 'asoc-v3.18-rc2' of ↵Takashi Iwai2014-10-27
|\ | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v3.18 A few small driver fixes for v3.18 plus the removal of the s6000 support since the relevant chip is no longer supported in mainline.
| *-------. Merge remote-tracking branches 'asoc/fix/adau1761', 'asoc/fix/fsl', ↵Mark Brown2014-10-27
| |\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | 'asoc/fix/intel', 'asoc/fix/s6000' and 'asoc/fix/sgtl5000' into asoc-linus
| | | | | | * ASoC: sgtl500: Document the required suppliesFabio Estevam2014-10-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | sgtl5000 has two required supplies: VDDA and VDDIO and one optional supply: VDDD, so document this properly. Not passing VDDA and VDDIO prevents the driver to probe successfully. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | | | * | ASoC: s6000: remove driverDaniel Glöckner2014-10-20
| | | | | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The s6000 Xtensa support is removed from the kernel. There are no other chips known to use this I2S controller. Signed-off-by: Daniel Glöckner <dg@emlix.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | | * / ASoC: Intel: HSW/BDW only support S16 and S24 formats.Liam Girdwood2014-10-16
| | | | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix driver with correct formats. Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
| | | * | ASoC: fsl: use strncpy() to prevent copying of over-long namesDaniel Mack2014-10-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use strncpy() instead of strcpy(). That's not a security issue, as the source buffer is taken from DT nodes, but we should still enforce bound checks. Spotted by Coverity. Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * | | ASoC: adau1761: Fix input PGA volumeLars-Peter Clausen2014-10-22
| | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For the input PGA to work correctly the ALC clock needs to be active. Otherwise volume changes are not applied. Fixes: dab464b60b2 ("ASoC: Add ADAU1361/ADAU1761 audio CODEC support") Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: stable@vger.kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
| * | | Linux 3.18-rc2Linus Torvalds2014-10-26
| | | |
| * | | Merge tag 'armsoc-for-rc2' of ↵Linus Torvalds2014-10-26
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "Another week, another small batch of fixes. Most of these make zynq, socfpga and sunxi platforms work a bit better: - due to new requirements for regulators, DWMMC on socfpga broke past v3.17 - SMP spinup fix for socfpga - a few DT fixes for zynq - another option (FIXED_REGULATOR) for sunxi is needed that used to be selected by other options but no longer is. - a couple of small DT fixes for at91 - ...and a couple for i.MX" * tag 'armsoc-for-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: dts: imx28-evk: Let i2c0 run at 100kHz ARM: i.MX6: Fix "emi" clock name typo ARM: multi_v7_defconfig: enable CONFIG_MMC_DW_ROCKCHIP ARM: sunxi_defconfig: enable CONFIG_REGULATOR_FIXED_VOLTAGE ARM: dts: socfpga: Add a 3.3V fixed regulator node ARM: dts: socfpga: Fix SD card detect ARM: dts: socfpga: rename gpio nodes ARM: at91/dt: sam9263: fix PLLB frequencies power: reset: at91-reset: fix power down register MAINTAINERS: add atmel ssc driver maintainer entry arm: socfpga: fix fetching cpu1start_addr for SMP ARM: zynq: DT: trivial: Fix mc node ARM: zynq: DT: Add cadence watchdog node ARM: zynq: DT: Add missing reference for memory-controller ARM: zynq: DT: Add missing reference for ADC ARM: zynq: DT: Add missing address for L2 pl310 ARM: zynq: DT: Remove 222 MHz OPP ARM: zynq: DT: Fix GEM register area size
| | * \ \ Merge tag 'imx-fixes-3.18' of ↵Olof Johansson2014-10-25
| | |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes Merge "ARM: imx: fixes for 3.18" from Shawn Guo: The i.MX fixes for 3.18: - Revert one patch which increases I2C bus frequency on imx28-evk - Fix a typo on imx6q EIM clock name * tag 'imx-fixes-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx28-evk: Let i2c0 run at 100kHz ARM: i.MX6: Fix "emi" clock name typo Signed-off-by: Olof Johansson <olof@lixom.net>
| | | * | | ARM: dts: imx28-evk: Let i2c0 run at 100kHzFabio Estevam2014-10-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 78b81f4666fb ("ARM: dts: imx28-evk: Run I2C0 at 400kHz") caused issues when doing the following sequence in loop: - Boot the kernel - Perform audio playback - Reboot the system via 'reboot' command In many times the audio card cannot be probed, which causes playback to fail. After restoring to the original i2c0 frequency of 100kHz there is no such problem anymore. This reverts commit 78b81f4666fbb22a20b1e63e5baf197ad2e90e88. Cc: <stable@vger.kernel.org> # 3.16+ Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| | | * | | ARM: i.MX6: Fix "emi" clock name typoSteve Longerbeam2014-10-25
| | | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix a typo error, the "emi" names refer to the eim clocks. The change fixes typo in EIM and EIM_SLOW pre-output dividers and selectors clock names. Notably EIM_SLOW clock itself is named correctly. Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> [vladimir_zapolskiy@mentor.com: ported to v3.17] Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| | * | | Merge tag 'socfpga_fixes_for_3.18' of ↵Olof Johansson2014-10-24
| | |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.rocketboards.org/linux-socfpga-next into fixes Merge "SOCFPGA fixes for 3.18" from Dinh Nguyen: These patches fixes an SMP and SDMMC driver hang during boot up on the SOCFPGA platform. Patch "arm: socfpga: fix fetching cpu1start_addr for SMP" fixes the SMP trampoline code in order for CPU1 to correctly fetch it's cpu1start_addr. Patch "ARM: dts: socfpga: rename gpio nodes" renames that GPIO node in order to allow a standard way of specifying status="okay" in the board DTS file. Patch "ARM: dts: socfpga: Fix SD card detect" fixes a SDMMC driver hang during boot. The reason for the hang was the deferred probe of the SDMMC driver was waiting for the GPIO resource that would never come. Patch "ARM: dts: socfpga: Add a 3.3V fixed regulator node" adds a fixed regulator node for the SDMMC driver to use. * tag 'socfpga_fixes_for_3.18' of git://git.rocketboards.org/linux-socfpga-next: ARM: dts: socfpga: Add a 3.3V fixed regulator node ARM: dts: socfpga: Fix SD card detect ARM: dts: socfpga: rename gpio nodes arm: socfpga: fix fetching cpu1start_addr for SMP Signed-off-by: Olof Johansson <olof@lixom.net>
| | | * | | ARM: dts: socfpga: Add a 3.3V fixed regulator nodeDinh Nguyen2014-10-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Without the 3.3V regulator node, the SDMMC driver will give these warnings: dw_mmc ff704000.dwmmc0: No vmmc regulator found dw_mmc ff704000.dwmmc0: No vqmmc regulator found This patch adds the regulator node, and points the SD/MMC to the regulator. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com> Reviewed-by: Doug Anderson <dianders@chromium.org> --- v3: Rename nodes to have schematic-name_regulator and remove "boot-on" and "always-on" v2: Move the regulator nodes to their respective board dts file and correctly rename them to match the schematic
| | | * | | ARM: dts: socfpga: Fix SD card detectDinh Nguyen2014-10-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Without this patch, the booting the SOCFPGA platform would hang at the SDMMC driver loading. The issue, debugged by Doug Anderson, turned out to be that the GPIO bank used by the SD card-detect was not set to status="okay". Also update the cd-gpios to point to portb of the &gpio1 GPIO IP. Suggested-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com> --- v4: Use &gpio1 to set status="okay" and update cd-gpio=&portb v3: Correctly degugged the issue to be a gpio node not having status="okay"
| | | * | | ARM: dts: socfpga: rename gpio nodesDinh Nguyen2014-10-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since the Synopsys GPIO IP can support multiple ports of varying widths, it would make more sense to have the GPIO node DTS entry as this: gpio0: gpio@ff708000{ porta{ }; }; Also, this is documented in the snps-dwapb-gpio.txt. Suggested-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
| | | * | | arm: socfpga: fix fetching cpu1start_addr for SMPDinh Nguyen2014-10-21
| | | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When CPU1 is brought out of reset, it's MMU is not turned on yet, so it will only be able to use physical addresses. For systems with that have the MMU page configured for 0xC0000000, 0x80000000, or 0x40000000 "BIC 0x40000000" will work just fine, as it was just converting the virtual address of &cpu1start_addr into a physical address, ie. 0xC0000000 became 0x80000000. So for systems where the SDRAM controller was able to do a wrap-around access, this was working fine, as it was just dropping the MSB, but for systems where out of bounds memory access is not allowed, this would not allow CPU1 to correctly fetch &cpu1start_addr. This patch fixes the secondary_trampoline code to correctly fetch the physical address of cpu1start_addr directly. The patch will subtract the correct PAGE_OFFSET from &cpu1start_addr. And since on this platform, the physical memory will always start at 0x0, subtracting PAGE_OFFSET from &cpu1start_addr will allow CPU1 to correctly fetch the value of cpu1start_addr. While at it, change the name of cpu1start_addr to socfpga_cpu1start_addr to avoid any future naming collisions for multiplatform image. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com> --- v4: Updated commit log to correctly lay out the usage of PAGE_OFFSET and add comments to the same effect. v3: Used PAGE_OFFSET to get the physical address v2: Correctly get the physical address instead of just a BIC hack.
| | * | | Merge tag 'at91-fixes' of ↵Olof Johansson2014-10-24
| | |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into fixes Merge "at91: fixes for v3.18 #1" from Nicholas Ferre: First AT91 fixes for 3.18: - one more MAINTAINERS entry for the SSC driver - a fix for the newly introduced power/reset driver - a fix on at91sam9263 USB due to PLLB misconfiguration * tag 'at91-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91: ARM: at91/dt: sam9263: fix PLLB frequencies power: reset: at91-reset: fix power down register MAINTAINERS: add atmel ssc driver maintainer entry Signed-off-by: Olof Johansson <olof@lixom.net>
| | | * | | ARM: at91/dt: sam9263: fix PLLB frequenciesBoris Brezillon2014-10-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PLLB input and output ranges were wrongly copied from at91sam9261 as the datasheet didn't mention explicitly PLLB. Correct their values. This fixes USB. Reported-by: Andreas Henriksson <andreas.henriksson@endian.se> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Tested-by: Andreas Henriksson <andreas.henriksson@endian.se> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
| | | * | | power: reset: at91-reset: fix power down registerAlexandre Belloni2014-10-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the case of at91sam9g45_restart(), the driver is writing AT91_DDRSDRC_LPCB_POWER_DOWN to AT91_DDRSDRC_RTR, this should actually be AT91_DDRSDRC_LPR. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Sebastian Reichel <sre@kernel.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
| | | * | | MAINTAINERS: add atmel ssc driver maintainer entryBo Shen2014-10-22
| | | |/ / | | | | | | | | | | | | | | | | | | | | Signed-off-by: Bo Shen <voice.shen@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
| | * | | Merge tag 'zynq-dt-fixes-for-3.18' of https://github.com/Xilinx/linux-xlnx ↵Olof Johansson2014-10-24
| | |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | into fixes Merge "Xilinx Zynq dt fixes for v3.18" from Michal Simek: arm: Xilinx Zynq DT fixes for v3.18 - Fix gem register size - Fix OPP - Add missing references - Trivial cleanup * tag 'zynq-dt-fixes-for-3.18' of https://github.com/Xilinx/linux-xlnx: ARM: zynq: DT: trivial: Fix mc node ARM: zynq: DT: Add cadence watchdog node ARM: zynq: DT: Add missing reference for memory-controller ARM: zynq: DT: Add missing reference for ADC ARM: zynq: DT: Add missing address for L2 pl310 ARM: zynq: DT: Remove 222 MHz OPP ARM: zynq: DT: Fix GEM register area size Signed-off-by: Olof Johansson <olof@lixom.net>
| | | * | | ARM: zynq: DT: trivial: Fix mc nodeMichal Simek2014-10-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | sed -i 's/}\ ;/};/g' Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| | | * | | ARM: zynq: DT: Add cadence watchdog nodeMichal Simek2014-10-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the cadence watchdog node to the Zynq devicetree. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| | | * | | ARM: zynq: DT: Add missing reference for memory-controllerMichal Simek2014-10-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add missing reference for memory-controller. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| | | * | | ARM: zynq: DT: Add missing reference for ADCMichal Simek2014-10-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add missing reference for ADC node. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| | | * | | ARM: zynq: DT: Add missing address for L2 pl310Michal Simek2014-10-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | By in sync with others node and add also baseaddr to the node name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| | | * | | ARM: zynq: DT: Remove 222 MHz OPPSoren Brinkmann2014-10-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Due to dependencies between timer and CPU frequency, only changes by powers of two are allowed. The clocksource driver prevents other changes, but with cpufreq and its governors it can result in being spammed with error messages constantly. Hence, remove the 222 MHz OPP. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| | | * | | ARM: zynq: DT: Fix GEM register area sizeSoren Brinkmann2014-10-20
| | | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The size of the GEM's register area is only 0x1000 bytes. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| | * | | ARM: multi_v7_defconfig: enable CONFIG_MMC_DW_ROCKCHIPOlof Johansson2014-10-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Allows booting from SD/MMC on RK3288 and other platforms. Added here so I can enable the board in the boot farm. Signed-off-by: Olof Johansson <olof@lixom.net>
| | * | | ARM: sunxi_defconfig: enable CONFIG_REGULATOR_FIXED_VOLTAGEOlof Johansson2014-10-24
| | |/ / | | | | | | | | | | | | | | | | | | | | | | | | I missed in 9a2ad529ed26 that REGULATOR_FIXED_VOLTAGE had also gotten deselected, so it needs to be added back as an explicit option. Signed-off-by: Olof Johansson <olof@lixom.net>
| * | | Merge branch 'for-linus' of ↵Linus Torvalds2014-10-26
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs updates from Al Viro: "overlayfs merge + leak fix for d_splice_alias() failure exits" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: overlayfs: embed middle into overlay_readdir_data overlayfs: embed root into overlay_readdir_data overlayfs: make ovl_cache_entry->name an array instead of pointer overlayfs: don't hold ->i_mutex over opening the real directory fix inode leaks on d_splice_alias() failure exits fs: limit filesystem stacking depth overlay: overlay filesystem documentation overlayfs: implement show_options overlayfs: add statfs support overlay filesystem shmem: support RENAME_WHITEOUT ext4: support RENAME_WHITEOUT vfs: add RENAME_WHITEOUT vfs: add whiteout support vfs: export check_sticky() vfs: introduce clone_private_mount() vfs: export __inode_permission() to modules vfs: export do_splice_direct() to modules vfs: add i_op->dentry_open()
| | * | | overlayfs: embed middle into overlay_readdir_dataAl Viro2014-10-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | same story... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
| | * | | overlayfs: embed root into overlay_readdir_dataAl Viro2014-10-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | no sense having it a pointer - all instances have it pointing to local variable in the same stack frame Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
| | * | | overlayfs: make ovl_cache_entry->name an array instead of pointerAl Viro2014-10-24
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
| | * | | overlayfs: don't hold ->i_mutex over opening the real directoryAl Viro2014-10-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | just use it to serialize the assignment Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
| | * | | Merge branch 'overlayfs.v25' of ↵Al Viro2014-10-23
| | |\ \ \ | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs into for-linus
generated by cgit v1.2.2 (git 2.25.0) at 2025-08-29 06:22:11 -0400