1 files changed, 99 insertions, 80 deletions

diff --git a/kernel/rcutree_plugin.h b/kernel/rcutree_plugin.h
index 2411000d9869..3e4899459f3d 100644
--- a/kernel/rcutree_plugin.h
+++ b/kernel/rcutree_plugin.h
@@ -153,7 +153,7 @@ static void rcu_preempt_qs(int cpu)
  *
  * Caller must disable preemption.
  */
-void rcu_preempt_note_context_switch(void)
+static void rcu_preempt_note_context_switch(int cpu)
 {
         struct task_struct *t = current;
         unsigned long flags;
@@ -164,7 +164,7 @@ void rcu_preempt_note_context_switch(void)
             (t->rcu_read_unlock_special & RCU_READ_UNLOCK_BLOCKED) == 0) {
 
                 /* Possibly blocking in an RCU read-side critical section. */
-                rdp = __this_cpu_ptr(rcu_preempt_state.rda);
+                rdp = per_cpu_ptr(rcu_preempt_state.rda, cpu);
                 rnp = rdp->mynode;
                 raw_spin_lock_irqsave(&rnp->lock, flags);
                 t->rcu_read_unlock_special |= RCU_READ_UNLOCK_BLOCKED;
@@ -228,7 +228,7 @@ void rcu_preempt_note_context_switch(void)
          * means that we continue to block the current grace period.
          */
         local_irq_save(flags);
-        rcu_preempt_qs(smp_processor_id());
+        rcu_preempt_qs(cpu);
         local_irq_restore(flags);
 }
 
@@ -1002,6 +1002,14 @@ void rcu_force_quiescent_state(void)
 EXPORT_SYMBOL_GPL(rcu_force_quiescent_state);
 
 /*
+ * Because preemptible RCU does not exist, we never have to check for
+ * CPUs being in quiescent states.
+ */
+static void rcu_preempt_note_context_switch(int cpu)
+{
+}
+
+/*
  * Because preemptible RCU does not exist, there are never any preempted
  * RCU readers.
  */
@@ -1886,8 +1894,9 @@ static void __cpuinit rcu_prepare_kthreads(int cpu)
  * Because we not have RCU_FAST_NO_HZ, just check whether this CPU needs
  * any flavor of RCU.
  */
-int rcu_needs_cpu(int cpu)
+int rcu_needs_cpu(int cpu, unsigned long *delta_jiffies)
 {
+        *delta_jiffies = ULONG_MAX;
         return rcu_cpu_has_callbacks(cpu);
 }
 
@@ -1962,41 +1971,6 @@ static void rcu_idle_count_callbacks_posted(void)
 #define RCU_IDLE_GP_DELAY 6             /* Roughly one grace period. */
 #define RCU_IDLE_LAZY_GP_DELAY (6 * HZ) /* Roughly six seconds. */
 
-/* Loop counter for rcu_prepare_for_idle(). */
-static DEFINE_PER_CPU(int, rcu_dyntick_drain);
-/* If rcu_dyntick_holdoff==jiffies, don't try to enter dyntick-idle mode. */
-static DEFINE_PER_CPU(unsigned long, rcu_dyntick_holdoff);
-/* Timer to awaken the CPU if it enters dyntick-idle mode with callbacks. */
-static DEFINE_PER_CPU(struct timer_list, rcu_idle_gp_timer);
-/* Scheduled expiry time for rcu_idle_gp_timer to allow reposting. */
-static DEFINE_PER_CPU(unsigned long, rcu_idle_gp_timer_expires);
-/* Enable special processing on first attempt to enter dyntick-idle mode. */
-static DEFINE_PER_CPU(bool, rcu_idle_first_pass);
-/* Running count of non-lazy callbacks posted, never decremented. */
-static DEFINE_PER_CPU(unsigned long, rcu_nonlazy_posted);
-/* Snapshot of rcu_nonlazy_posted to detect meaningful exits from idle. */
-static DEFINE_PER_CPU(unsigned long, rcu_nonlazy_posted_snap);
-
-/*
- * Allow the CPU to enter dyntick-idle mode if either: (1) There are no
- * callbacks on this CPU, (2) this CPU has not yet attempted to enter
- * dyntick-idle mode, or (3) this CPU is in the process of attempting to
- * enter dyntick-idle mode.  Otherwise, if we have recently tried and failed
- * to enter dyntick-idle mode, we refuse to try to enter it.  After all,
- * it is better to incur scheduling-clock interrupts than to spin
- * continuously for the same time duration!
- */
-int rcu_needs_cpu(int cpu)
-{
-        /* Flag a new idle sojourn to the idle-entry state machine. */
-        per_cpu(rcu_idle_first_pass, cpu) = 1;
-        /* If no callbacks, RCU doesn't need the CPU. */
-        if (!rcu_cpu_has_callbacks(cpu))
-                return 0;
-        /* Otherwise, RCU needs the CPU only if it recently tried and failed. */
-        return per_cpu(rcu_dyntick_holdoff, cpu) == jiffies;
-}
-
 /*
  * Does the specified flavor of RCU have non-lazy callbacks pending on
  * the specified CPU?  Both RCU flavor and CPU are specified by the
@@ -2040,6 +2014,47 @@ static bool rcu_cpu_has_nonlazy_callbacks(int cpu)
 }
 
 /*
+ * Allow the CPU to enter dyntick-idle mode if either: (1) There are no
+ * callbacks on this CPU, (2) this CPU has not yet attempted to enter
+ * dyntick-idle mode, or (3) this CPU is in the process of attempting to
+ * enter dyntick-idle mode.  Otherwise, if we have recently tried and failed
+ * to enter dyntick-idle mode, we refuse to try to enter it.  After all,
+ * it is better to incur scheduling-clock interrupts than to spin
+ * continuously for the same time duration!
+ *
+ * The delta_jiffies argument is used to store the time when RCU is
+ * going to need the CPU again if it still has callbacks.  The reason
+ * for this is that rcu_prepare_for_idle() might need to post a timer,
+ * but if so, it will do so after tick_nohz_stop_sched_tick() has set
+ * the wakeup time for this CPU.  This means that RCU's timer can be
+ * delayed until the wakeup time, which defeats the purpose of posting
+ * a timer.
+ */
+int rcu_needs_cpu(int cpu, unsigned long *delta_jiffies)
+{
+        struct rcu_dynticks *rdtp = &per_cpu(rcu_dynticks, cpu);
+
+        /* Flag a new idle sojourn to the idle-entry state machine. */
+        rdtp->idle_first_pass = 1;
+        /* If no callbacks, RCU doesn't need the CPU. */
+        if (!rcu_cpu_has_callbacks(cpu)) {
+                *delta_jiffies = ULONG_MAX;
+                return 0;
+        }
+        if (rdtp->dyntick_holdoff == jiffies) {
+                /* RCU recently tried and failed, so don't try again. */
+                *delta_jiffies = 1;
+                return 1;
+        }
+        /* Set up for the possibility that RCU will post a timer. */
+        if (rcu_cpu_has_nonlazy_callbacks(cpu))
+                *delta_jiffies = RCU_IDLE_GP_DELAY;
+        else
+                *delta_jiffies = RCU_IDLE_LAZY_GP_DELAY;
+        return 0;
+}
+
+/*
  * Handler for smp_call_function_single().  The only point of this
  * handler is to wake the CPU up, so the handler does only tracing.
  */
@@ -2075,21 +2090,24 @@ static void rcu_idle_gp_timer_func(unsigned long cpu_in)
  */
 static void rcu_prepare_for_idle_init(int cpu)
 {
-        per_cpu(rcu_dyntick_holdoff, cpu) = jiffies - 1;
-        setup_timer(&per_cpu(rcu_idle_gp_timer, cpu),
-                    rcu_idle_gp_timer_func, cpu);
-        per_cpu(rcu_idle_gp_timer_expires, cpu) = jiffies - 1;
-        per_cpu(rcu_idle_first_pass, cpu) = 1;
+        struct rcu_dynticks *rdtp = &per_cpu(rcu_dynticks, cpu);
+
+        rdtp->dyntick_holdoff = jiffies - 1;
+        setup_timer(&rdtp->idle_gp_timer, rcu_idle_gp_timer_func, cpu);
+        rdtp->idle_gp_timer_expires = jiffies - 1;
+        rdtp->idle_first_pass = 1;
 }
 
 /*
  * Clean up for exit from idle.  Because we are exiting from idle, there
- * is no longer any point to rcu_idle_gp_timer, so cancel it.  This will
+ * is no longer any point to ->idle_gp_timer, so cancel it.  This will
  * do nothing if this timer is not active, so just cancel it unconditionally.
  */
 static void rcu_cleanup_after_idle(int cpu)
 {
-        del_timer(&per_cpu(rcu_idle_gp_timer, cpu));
+        struct rcu_dynticks *rdtp = &per_cpu(rcu_dynticks, cpu);
+
+        del_timer(&rdtp->idle_gp_timer);
         trace_rcu_prep_idle("Cleanup after idle");
 }
 
@@ -2108,42 +2126,41 @@ static void rcu_cleanup_after_idle(int cpu)
  * Because it is not legal to invoke rcu_process_callbacks() with irqs
  * disabled, we do one pass of force_quiescent_state(), then do a
  * invoke_rcu_core() to cause rcu_process_callbacks() to be invoked
- * later.  The per-cpu rcu_dyntick_drain variable controls the sequencing.
+ * later.  The ->dyntick_drain field controls the sequencing.
  *
  * The caller must have disabled interrupts.
  */
 static void rcu_prepare_for_idle(int cpu)
 {
         struct timer_list *tp;
+        struct rcu_dynticks *rdtp = &per_cpu(rcu_dynticks, cpu);
 
         /*
          * If this is an idle re-entry, for example, due to use of
          * RCU_NONIDLE() or the new idle-loop tracing API within the idle
          * loop, then don't take any state-machine actions, unless the
          * momentary exit from idle queued additional non-lazy callbacks.
-         * Instead, repost the rcu_idle_gp_timer if this CPU has callbacks
+         * Instead, repost the ->idle_gp_timer if this CPU has callbacks
          * pending.
          */
-        if (!per_cpu(rcu_idle_first_pass, cpu) &&
-            (per_cpu(rcu_nonlazy_posted, cpu) ==
-             per_cpu(rcu_nonlazy_posted_snap, cpu))) {
+        if (!rdtp->idle_first_pass &&
+            (rdtp->nonlazy_posted == rdtp->nonlazy_posted_snap)) {
                 if (rcu_cpu_has_callbacks(cpu)) {
-                        tp = &per_cpu(rcu_idle_gp_timer, cpu);
-                        mod_timer_pinned(tp, per_cpu(rcu_idle_gp_timer_expires, cpu));
+                        tp = &rdtp->idle_gp_timer;
+                        mod_timer_pinned(tp, rdtp->idle_gp_timer_expires);
                 }
                 return;
         }
-        per_cpu(rcu_idle_first_pass, cpu) = 0;
-        per_cpu(rcu_nonlazy_posted_snap, cpu) =
-                per_cpu(rcu_nonlazy_posted, cpu) - 1;
+        rdtp->idle_first_pass = 0;
+        rdtp->nonlazy_posted_snap = rdtp->nonlazy_posted - 1;
 
         /*
          * If there are no callbacks on this CPU, enter dyntick-idle mode.
          * Also reset state to avoid prejudicing later attempts.
          */
         if (!rcu_cpu_has_callbacks(cpu)) {
-                per_cpu(rcu_dyntick_holdoff, cpu) = jiffies - 1;
-                per_cpu(rcu_dyntick_drain, cpu) = 0;
+                rdtp->dyntick_holdoff = jiffies - 1;
+                rdtp->dyntick_drain = 0;
                 trace_rcu_prep_idle("No callbacks");
                 return;
         }
@@ -2152,36 +2169,37 @@ static void rcu_prepare_for_idle(int cpu)
          * If in holdoff mode, just return.  We will presumably have
          * refrained from disabling the scheduling-clock tick.
          */
-        if (per_cpu(rcu_dyntick_holdoff, cpu) == jiffies) {
+        if (rdtp->dyntick_holdoff == jiffies) {
                 trace_rcu_prep_idle("In holdoff");
                 return;
         }
 
-        /* Check and update the rcu_dyntick_drain sequencing. */
-        if (per_cpu(rcu_dyntick_drain, cpu) <= 0) {
+        /* Check and update the ->dyntick_drain sequencing. */
+        if (rdtp->dyntick_drain <= 0) {
                 /* First time through, initialize the counter. */
-                per_cpu(rcu_dyntick_drain, cpu) = RCU_IDLE_FLUSHES;
-        } else if (per_cpu(rcu_dyntick_drain, cpu) <= RCU_IDLE_OPT_FLUSHES &&
+                rdtp->dyntick_drain = RCU_IDLE_FLUSHES;
+        } else if (rdtp->dyntick_drain <= RCU_IDLE_OPT_FLUSHES &&
                    !rcu_pending(cpu) &&
                    !local_softirq_pending()) {
                 /* Can we go dyntick-idle despite still having callbacks? */
-                trace_rcu_prep_idle("Dyntick with callbacks");
-                per_cpu(rcu_dyntick_drain, cpu) = 0;
-                per_cpu(rcu_dyntick_holdoff, cpu) = jiffies;
-                if (rcu_cpu_has_nonlazy_callbacks(cpu))
-                        per_cpu(rcu_idle_gp_timer_expires, cpu) =
+                rdtp->dyntick_drain = 0;
+                rdtp->dyntick_holdoff = jiffies;
+                if (rcu_cpu_has_nonlazy_callbacks(cpu)) {
+                        trace_rcu_prep_idle("Dyntick with callbacks");
+                        rdtp->idle_gp_timer_expires =
                                            jiffies + RCU_IDLE_GP_DELAY;
-                else
-                        per_cpu(rcu_idle_gp_timer_expires, cpu) =
+                } else {
+                        rdtp->idle_gp_timer_expires =
                                            jiffies + RCU_IDLE_LAZY_GP_DELAY;
-                tp = &per_cpu(rcu_idle_gp_timer, cpu);
-                mod_timer_pinned(tp, per_cpu(rcu_idle_gp_timer_expires, cpu));
-                per_cpu(rcu_nonlazy_posted_snap, cpu) =
-                        per_cpu(rcu_nonlazy_posted, cpu);
+                        trace_rcu_prep_idle("Dyntick with lazy callbacks");
+                }
+                tp = &rdtp->idle_gp_timer;
+                mod_timer_pinned(tp, rdtp->idle_gp_timer_expires);
+                rdtp->nonlazy_posted_snap = rdtp->nonlazy_posted;
                 return; /* Nothing more to do immediately. */
-        } else if (--per_cpu(rcu_dyntick_drain, cpu) <= 0) {
+        } else if (--(rdtp->dyntick_drain) <= 0) {
                 /* We have hit the limit, so time to give up. */
-                per_cpu(rcu_dyntick_holdoff, cpu) = jiffies;
+                rdtp->dyntick_holdoff = jiffies;
                 trace_rcu_prep_idle("Begin holdoff");
                 invoke_rcu_core();  /* Force the CPU out of dyntick-idle. */
                 return;
@@ -2227,7 +2245,7 @@ static void rcu_prepare_for_idle(int cpu)
  */
 static void rcu_idle_count_callbacks_posted(void)
 {
-        __this_cpu_add(rcu_nonlazy_posted, 1);
+        __this_cpu_add(rcu_dynticks.nonlazy_posted, 1);
 }
 
 #endif /* #else #if !defined(CONFIG_RCU_FAST_NO_HZ) */
@@ -2238,11 +2256,12 @@ static void rcu_idle_count_callbacks_posted(void)
 
 static void print_cpu_stall_fast_no_hz(char *cp, int cpu)
 {
-        struct timer_list *tltp = &per_cpu(rcu_idle_gp_timer, cpu);
+        struct rcu_dynticks *rdtp = &per_cpu(rcu_dynticks, cpu);
+        struct timer_list *tltp = &rdtp->idle_gp_timer;
 
         sprintf(cp, "drain=%d %c timer=%lu",
-                per_cpu(rcu_dyntick_drain, cpu),
-                per_cpu(rcu_dyntick_holdoff, cpu) == jiffies ? 'H' : '.',
+                rdtp->dyntick_drain,
+                rdtp->dyntick_holdoff == jiffies ? 'H' : '.',
                 timer_pending(tltp) ? tltp->expires - jiffies : -1);
 }