2 files changed, 48 insertions, 0 deletions

diff --git a/include/linux/rotary_encoder.h b/include/linux/rotary_encoder.h
new file mode 100644
index 000000000000..12d63a30c347
--- /dev/null
+++ b/include/linux/rotary_encoder.h
@@ -0,0 +1,13 @@
+#ifndef __ROTARY_ENCODER_H__
+#define __ROTARY_ENCODER_H__
+
+struct rotary_encoder_platform_data {
+        unsigned int steps;
+        unsigned int axis;
+        unsigned int gpio_a;
+        unsigned int gpio_b;
+        unsigned int inverted_a;
+        unsigned int inverted_b;
+};
+
+#endif /* __ROTARY_ENCODER_H__ */
diff --git a/include/linux/spi/ad7879.h b/include/linux/spi/ad7879.h
new file mode 100644
index 000000000000..4231104c9afa
--- /dev/null
+++ b/include/linux/spi/ad7879.h
@@ -0,0 +1,35 @@
+/* linux/spi/ad7879.h */
+
+/* Touchscreen characteristics vary between boards and models.  The
+ * platform_data for the device's "struct device" holds this information.
+ *
+ * It's OK if the min/max values are zero.
+ */
+struct ad7879_platform_data {
+        u16     model;                  /* 7879 */
+        u16     x_plate_ohms;
+        u16     x_min, x_max;
+        u16     y_min, y_max;
+        u16     pressure_min, pressure_max;
+
+        /* [0..255] 0=OFF Starts at 1=550us and goes
+         * all the way to 9.440ms in steps of 35us.
+         */
+        u8      pen_down_acc_interval;
+        /* [0..15] Starts at 0=128us and goes all the
+         * way to 4.096ms in steps of 128us.
+         */
+        u8      first_conversion_delay;
+        /* [0..3] 0 = 2us, 1 = 4us, 2 = 8us, 3 = 16us */
+        u8      acquisition_time;
+        /* [0..3] Average X middle samples 0 = 2, 1 = 4, 2 = 8, 3 = 16 */
+        u8      averaging;
+        /* [0..3] Perform X measurements 0 = OFF,
+         * 1 = 4, 2 = 8, 3 = 16 (median > averaging)
+         */
+        u8      median;
+        /* 1 = AUX/VBAT/GPIO set to GPIO Output */
+        u8      gpio_output;
+        /* Initial GPIO pin state (valid if gpio_output = 1) */
+        u8      gpio_default;
+};