1 files changed, 386 insertions, 9 deletions

diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index e3e19f8b16f2..c46bb016f4e4 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -170,7 +170,8 @@
  *      %NL80211_ATTR_HIDDEN_SSID, %NL80211_ATTR_CIPHERS_PAIRWISE,
  *      %NL80211_ATTR_CIPHER_GROUP, %NL80211_ATTR_WPA_VERSIONS,
  *      %NL80211_ATTR_AKM_SUITES, %NL80211_ATTR_PRIVACY,
- *      %NL80211_ATTR_AUTH_TYPE and %NL80211_ATTR_INACTIVITY_TIMEOUT.
+ *      %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_INACTIVITY_TIMEOUT,
+ *      %NL80211_ATTR_ACL_POLICY and %NL80211_ATTR_MAC_ADDRS.
  *      The channel to use can be set on the interface or be given using the
  *      %NL80211_ATTR_WIPHY_FREQ and the attributes determining channel width.
  * @NL80211_CMD_NEW_BEACON: old alias for %NL80211_CMD_START_AP
@@ -374,8 +375,8 @@
  *      requests to connect to a specified network but without separating
  *      auth and assoc steps. For this, you need to specify the SSID in a
  *      %NL80211_ATTR_SSID attribute, and can optionally specify the association
- *      IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_MAC,
- *      %NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT,
+ *      IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_USE_MFP,
+ *      %NL80211_ATTR_MAC, %NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT,
  *      %NL80211_ATTR_CONTROL_PORT_ETHERTYPE and
  *      %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT.
  *      Background scan period can optionally be
@@ -512,6 +513,12 @@
  *      command with the %NL80211_ATTR_WOWLAN_TRIGGERS attribute. For
  *      more background information, see
  *      http://wireless.kernel.org/en/users/Documentation/WoWLAN.
+ *      The @NL80211_CMD_SET_WOWLAN command can also be used as a notification
+ *      from the driver reporting the wakeup reason. In this case, the
+ *      @NL80211_ATTR_WOWLAN_TRIGGERS attribute will contain the reason
+ *      for the wakeup, if it was caused by wireless. If it is not present
+ *      in the wakeup notification, the wireless device didn't cause the
+ *      wakeup but reports that it was woken up.
  *
  * @NL80211_CMD_SET_REKEY_OFFLOAD: This command is used give the driver
  *      the necessary information for supporting GTK rekey offload. This
@@ -586,6 +593,24 @@
  * @NL80211_CMD_SET_MCAST_RATE: Change the rate used to send multicast frames
  *      for IBSS or MESH vif.
  *
+ * @NL80211_CMD_SET_MAC_ACL: sets ACL for MAC address based access control.
+ *      This is to be used with the drivers advertising the support of MAC
+ *      address based access control. List of MAC addresses is passed in
+ *      %NL80211_ATTR_MAC_ADDRS and ACL policy is passed in
+ *      %NL80211_ATTR_ACL_POLICY. Driver will enable ACL with this list, if it
+ *      is not already done. The new list will replace any existing list. Driver
+ *      will clear its ACL when the list of MAC addresses passed is empty. This
+ *      command is used in AP/P2P GO mode. Driver has to make sure to clear its
+ *      ACL list during %NL80211_CMD_STOP_AP.
+ *
+ * @NL80211_CMD_RADAR_DETECT: Start a Channel availability check (CAC). Once
+ *      a radar is detected or the channel availability scan (CAC) has finished
+ *      or was aborted, or a radar was detected, usermode will be notified with
+ *      this event. This command is also used to notify userspace about radars
+ *      while operating on this channel.
+ *      %NL80211_ATTR_RADAR_EVENT is used to inform about the type of the
+ *      event.
+ *
  * @NL80211_CMD_MAX: highest used command number
  * @__NL80211_CMD_AFTER_LAST: internal use
  */
@@ -736,6 +761,10 @@ enum nl80211_commands {
 
         NL80211_CMD_SET_MCAST_RATE,
 
+        NL80211_CMD_SET_MAC_ACL,
+
+        NL80211_CMD_RADAR_DETECT,
+
         /* add new commands above here */
 
         /* used to define NL80211_CMD_MAX below */
@@ -958,7 +987,7 @@ enum nl80211_commands {
  * @NL80211_ATTR_USE_MFP: Whether management frame protection (IEEE 802.11w) is
  *      used for the association (&enum nl80211_mfp, represented as a u32);
  *      this attribute can be used
- *      with %NL80211_CMD_ASSOCIATE request
+ *      with %NL80211_CMD_ASSOCIATE and %NL80211_CMD_CONNECT requests
  *
  * @NL80211_ATTR_STA_FLAGS2: Attribute containing a
  *      &struct nl80211_sta_flag_update.
@@ -1310,6 +1339,35 @@ enum nl80211_commands {
  *      if not given in START_AP 0 is assumed, if not given in SET_BSS
  *      no change is made.
  *
+ * @NL80211_ATTR_LOCAL_MESH_POWER_MODE: local mesh STA link-specific power mode
+ *      defined in &enum nl80211_mesh_power_mode.
+ *
+ * @NL80211_ATTR_ACL_POLICY: ACL policy, see &enum nl80211_acl_policy,
+ *      carried in a u32 attribute
+ *
+ * @NL80211_ATTR_MAC_ADDRS: Array of nested MAC addresses, used for
+ *      MAC ACL.
+ *
+ * @NL80211_ATTR_MAC_ACL_MAX: u32 attribute to advertise the maximum
+ *      number of MAC addresses that a device can support for MAC
+ *      ACL.
+ *
+ * @NL80211_ATTR_RADAR_EVENT: Type of radar event for notification to userspace,
+ *      contains a value of enum nl80211_radar_event (u32).
+ *
+ * @NL80211_ATTR_EXT_CAPA: 802.11 extended capabilities that the kernel driver
+ *      has and handles. The format is the same as the IE contents. See
+ *      802.11-2012 8.4.2.29 for more information.
+ * @NL80211_ATTR_EXT_CAPA_MASK: Extended capabilities that the kernel driver
+ *      has set in the %NL80211_ATTR_EXT_CAPA value, for multibit fields.
+ *
+ * @NL80211_ATTR_STA_CAPABILITY: Station capabilities (u16) are advertised to
+ *      the driver, e.g., to enable TDLS power save (PU-APSD).
+ *
+ * @NL80211_ATTR_STA_EXT_CAPABILITY: Station extended capabilities are
+ *      advertised to the driver, e.g., to enable TDLS off channel operations
+ *      and PU-APSD.
+ *
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
  */
@@ -1580,6 +1638,22 @@ enum nl80211_attrs {
         NL80211_ATTR_P2P_CTWINDOW,
         NL80211_ATTR_P2P_OPPPS,
 
+        NL80211_ATTR_LOCAL_MESH_POWER_MODE,
+
+        NL80211_ATTR_ACL_POLICY,
+
+        NL80211_ATTR_MAC_ADDRS,
+
+        NL80211_ATTR_MAC_ACL_MAX,
+
+        NL80211_ATTR_RADAR_EVENT,
+
+        NL80211_ATTR_EXT_CAPA,
+        NL80211_ATTR_EXT_CAPA_MASK,
+
+        NL80211_ATTR_STA_CAPABILITY,
+        NL80211_ATTR_STA_EXT_CAPABILITY,
+
         /* add attributes here, update the policy in nl80211.c */
 
         __NL80211_ATTR_AFTER_LAST,
@@ -1697,6 +1771,9 @@ enum nl80211_iftype {
  *      flag can't be changed, it is only valid while adding a station, and
  *      attempts to change it will silently be ignored (rather than rejected
  *      as errors.)
+ * @NL80211_STA_FLAG_ASSOCIATED: station is associated; used with drivers
+ *      that support %NL80211_FEATURE_FULL_AP_CLIENT_STATE to transition a
+ *      previously added station into associated state
  * @NL80211_STA_FLAG_MAX: highest station flag number currently defined
  * @__NL80211_STA_FLAG_AFTER_LAST: internal use
  */
@@ -1708,6 +1785,7 @@ enum nl80211_sta_flags {
         NL80211_STA_FLAG_MFP,
         NL80211_STA_FLAG_AUTHENTICATED,
         NL80211_STA_FLAG_TDLS_PEER,
+        NL80211_STA_FLAG_ASSOCIATED,
 
         /* keep last */
         __NL80211_STA_FLAG_AFTER_LAST,
@@ -1813,6 +1891,8 @@ enum nl80211_sta_bss_param {
  * @NL80211_STA_INFO_INACTIVE_TIME: time since last activity (u32, msecs)
  * @NL80211_STA_INFO_RX_BYTES: total received bytes (u32, from this station)
  * @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (u32, to this station)
+ * @NL80211_STA_INFO_RX_BYTES64: total received bytes (u64, from this station)
+ * @NL80211_STA_INFO_TX_BYTES64: total transmitted bytes (u64, to this station)
  * @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm)
  * @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute
  *      containing info as possible, see &enum nl80211_rate_info
@@ -1834,6 +1914,10 @@ enum nl80211_sta_bss_param {
  * @NL80211_STA_INFO_STA_FLAGS: Contains a struct nl80211_sta_flag_update.
  * @NL80211_STA_INFO_BEACON_LOSS: count of times beacon loss was detected (u32)
  * @NL80211_STA_INFO_T_OFFSET: timing offset with respect to this STA (s64)
+ * @NL80211_STA_INFO_LOCAL_PM: local mesh STA link-specific power mode
+ * @NL80211_STA_INFO_PEER_PM: peer mesh STA link-specific power mode
+ * @NL80211_STA_INFO_NONPEER_PM: neighbor mesh STA power save mode towards
+ *      non-peer STA
  * @__NL80211_STA_INFO_AFTER_LAST: internal
  * @NL80211_STA_INFO_MAX: highest possible station info attribute
  */
@@ -1858,6 +1942,11 @@ enum nl80211_sta_info {
         NL80211_STA_INFO_STA_FLAGS,
         NL80211_STA_INFO_BEACON_LOSS,
         NL80211_STA_INFO_T_OFFSET,
+        NL80211_STA_INFO_LOCAL_PM,
+        NL80211_STA_INFO_PEER_PM,
+        NL80211_STA_INFO_NONPEER_PM,
+        NL80211_STA_INFO_RX_BYTES64,
+        NL80211_STA_INFO_TX_BYTES64,
 
         /* keep last */
         __NL80211_STA_INFO_AFTER_LAST,
@@ -1967,6 +2056,20 @@ enum nl80211_band_attr {
  *      on this channel in current regulatory domain.
  * @NL80211_FREQUENCY_ATTR_MAX_TX_POWER: Maximum transmission power in mBm
  *      (100 * dBm).
+ * @NL80211_FREQUENCY_ATTR_DFS_STATE: current state for DFS
+ *      (enum nl80211_dfs_state)
+ * @NL80211_FREQUENCY_ATTR_DFS_TIME: time in miliseconds for how long
+ *      this channel is in this DFS state.
+ * @NL80211_FREQUENCY_ATTR_NO_HT40_MINUS: HT40- isn't possible with this
+ *      channel as the control channel
+ * @NL80211_FREQUENCY_ATTR_NO_HT40_PLUS: HT40+ isn't possible with this
+ *      channel as the control channel
+ * @NL80211_FREQUENCY_ATTR_NO_80MHZ: any 80 MHz channel using this channel
+ *      as the primary or any of the secondary channels isn't possible,
+ *      this includes 80+80 channels
+ * @NL80211_FREQUENCY_ATTR_NO_160MHZ: any 160 MHz (but not 80+80) channel
+ *      using this channel as the primary or any of the secondary channels
+ *      isn't possible
  * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number
  *      currently defined
  * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use
@@ -1979,6 +2082,12 @@ enum nl80211_frequency_attr {
         NL80211_FREQUENCY_ATTR_NO_IBSS,
         NL80211_FREQUENCY_ATTR_RADAR,
         NL80211_FREQUENCY_ATTR_MAX_TX_POWER,
+        NL80211_FREQUENCY_ATTR_DFS_STATE,
+        NL80211_FREQUENCY_ATTR_DFS_TIME,
+        NL80211_FREQUENCY_ATTR_NO_HT40_MINUS,
+        NL80211_FREQUENCY_ATTR_NO_HT40_PLUS,
+        NL80211_FREQUENCY_ATTR_NO_80MHZ,
+        NL80211_FREQUENCY_ATTR_NO_160MHZ,
 
         /* keep last */
         __NL80211_FREQUENCY_ATTR_AFTER_LAST,
@@ -2249,6 +2358,34 @@ enum nl80211_mntr_flags {
 };
 
 /**
+ * enum nl80211_mesh_power_mode - mesh power save modes
+ *
+ * @NL80211_MESH_POWER_UNKNOWN: The mesh power mode of the mesh STA is
+ *      not known or has not been set yet.
+ * @NL80211_MESH_POWER_ACTIVE: Active mesh power mode. The mesh STA is
+ *      in Awake state all the time.
+ * @NL80211_MESH_POWER_LIGHT_SLEEP: Light sleep mode. The mesh STA will
+ *      alternate between Active and Doze states, but will wake up for
+ *      neighbor's beacons.
+ * @NL80211_MESH_POWER_DEEP_SLEEP: Deep sleep mode. The mesh STA will
+ *      alternate between Active and Doze states, but may not wake up
+ *      for neighbor's beacons.
+ *
+ * @__NL80211_MESH_POWER_AFTER_LAST - internal use
+ * @NL80211_MESH_POWER_MAX - highest possible power save level
+ */
+
+enum nl80211_mesh_power_mode {
+        NL80211_MESH_POWER_UNKNOWN,
+        NL80211_MESH_POWER_ACTIVE,
+        NL80211_MESH_POWER_LIGHT_SLEEP,
+        NL80211_MESH_POWER_DEEP_SLEEP,
+
+        __NL80211_MESH_POWER_AFTER_LAST,
+        NL80211_MESH_POWER_MAX = __NL80211_MESH_POWER_AFTER_LAST - 1
+};
+
+/**
  * enum nl80211_meshconf_params - mesh configuration parameters
  *
  * Mesh configuration parameters. These can be changed while the mesh is
@@ -2342,6 +2479,11 @@ enum nl80211_mntr_flags {
  *      (in TUs) during which a mesh STA can send only one Action frame
  *      containing a PREQ element for root path confirmation.
  *
+ * @NL80211_MESHCONF_POWER_MODE: Default mesh power mode for new peer links.
+ *      type &enum nl80211_mesh_power_mode (u32)
+ *
+ * @NL80211_MESHCONF_AWAKE_WINDOW: awake window duration (in TUs)
+ *
  * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use
  */
 enum nl80211_meshconf_params {
@@ -2371,6 +2513,8 @@ enum nl80211_meshconf_params {
         NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT,
         NL80211_MESHCONF_HWMP_ROOT_INTERVAL,
         NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL,
+        NL80211_MESHCONF_POWER_MODE,
+        NL80211_MESHCONF_AWAKE_WINDOW,
 
         /* keep last */
         __NL80211_MESHCONF_ATTR_AFTER_LAST,
@@ -2816,10 +2960,12 @@ enum nl80211_tx_power_setting {
  *      corresponds to the lowest-order bit in the second byte of the mask.
  *      For example: The match 00:xx:00:00:xx:00:00:00:00:xx:xx:xx (where
  *      xx indicates "don't care") would be represented by a pattern of
- *      twelve zero bytes, and a mask of "0xed,0x07".
+ *      twelve zero bytes, and a mask of "0xed,0x01".
  *      Note that the pattern matching is done as though frames were not
  *      802.11 frames but 802.3 frames, i.e. the frame is fully unpacked
  *      first (including SNAP header unpacking) and then matched.
+ * @NL80211_WOWLAN_PKTPAT_OFFSET: packet offset, pattern is matched after
+ *      these fixed number of bytes of received packet
  * @NUM_NL80211_WOWLAN_PKTPAT: number of attributes
  * @MAX_NL80211_WOWLAN_PKTPAT: max attribute number
  */
@@ -2827,6 +2973,7 @@ enum nl80211_wowlan_packet_pattern_attr {
         __NL80211_WOWLAN_PKTPAT_INVALID,
         NL80211_WOWLAN_PKTPAT_MASK,
         NL80211_WOWLAN_PKTPAT_PATTERN,
+        NL80211_WOWLAN_PKTPAT_OFFSET,
 
         NUM_NL80211_WOWLAN_PKTPAT,
         MAX_NL80211_WOWLAN_PKTPAT = NUM_NL80211_WOWLAN_PKTPAT - 1,
@@ -2837,6 +2984,7 @@ enum nl80211_wowlan_packet_pattern_attr {
  * @max_patterns: maximum number of patterns supported
  * @min_pattern_len: minimum length of each pattern
  * @max_pattern_len: maximum length of each pattern
+ * @max_pkt_offset: maximum Rx packet offset
  *
  * This struct is carried in %NL80211_WOWLAN_TRIG_PKT_PATTERN when
  * that is part of %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED in the
@@ -2846,6 +2994,7 @@ struct nl80211_wowlan_pattern_support {
         __u32 max_patterns;
         __u32 min_pattern_len;
         __u32 max_pattern_len;
+        __u32 max_pkt_offset;
 } __attribute__((packed));
 
 /**
@@ -2861,12 +3010,17 @@ struct nl80211_wowlan_pattern_support {
  * @NL80211_WOWLAN_TRIG_PKT_PATTERN: wake up on the specified packet patterns
  *      which are passed in an array of nested attributes, each nested attribute
  *      defining a with attributes from &struct nl80211_wowlan_trig_pkt_pattern.
- *      Each pattern defines a wakeup packet. The matching is done on the MSDU,
- *      i.e. as though the packet was an 802.3 packet, so the pattern matching
- *      is done after the packet is converted to the MSDU.
+ *      Each pattern defines a wakeup packet. Packet offset is associated with
+ *      each pattern which is used while matching the pattern. The matching is
+ *      done on the MSDU, i.e. as though the packet was an 802.3 packet, so the
+ *      pattern matching is done after the packet is converted to the MSDU.
  *
  *      In %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED, it is a binary attribute
  *      carrying a &struct nl80211_wowlan_pattern_support.
+ *
+ *      When reporting wakeup. it is a u32 attribute containing the 0-based
+ *      index of the pattern that caused the wakeup, in the patterns passed
+ *      to the kernel when configuring.
  * @NL80211_WOWLAN_TRIG_GTK_REKEY_SUPPORTED: Not a real trigger, and cannot be
  *      used when setting, used only to indicate that GTK rekeying is supported
  *      by the device (flag)
@@ -2877,8 +3031,36 @@ struct nl80211_wowlan_pattern_support {
  * @NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE: wake up on 4-way handshake (flag)
  * @NL80211_WOWLAN_TRIG_RFKILL_RELEASE: wake up when rfkill is released
  *      (on devices that have rfkill in the device) (flag)
+ * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211: For wakeup reporting only, contains
+ *      the 802.11 packet that caused the wakeup, e.g. a deauth frame. The frame
+ *      may be truncated, the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211_LEN
+ *      attribute contains the original length.
+ * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211_LEN: Original length of the 802.11
+ *      packet, may be bigger than the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211
+ *      attribute if the packet was truncated somewhere.
+ * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023: For wakeup reporting only, contains the
+ *      802.11 packet that caused the wakeup, e.g. a magic packet. The frame may
+ *      be truncated, the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023_LEN attribute
+ *      contains the original length.
+ * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023_LEN: Original length of the 802.3
+ *      packet, may be bigger than the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023
+ *      attribute if the packet was truncated somewhere.
+ * @NL80211_WOWLAN_TRIG_TCP_CONNECTION: TCP connection wake, see DOC section
+ *      "TCP connection wakeup" for more details. This is a nested attribute
+ *      containing the exact information for establishing and keeping alive
+ *      the TCP connection.
+ * @NL80211_WOWLAN_TRIG_TCP_WAKEUP_MATCH: For wakeup reporting only, the
+ *      wakeup packet was received on the TCP connection
+ * @NL80211_WOWLAN_TRIG_WAKEUP_TCP_CONNLOST: For wakeup reporting only, the
+ *      TCP connection was lost or failed to be established
+ * @NL80211_WOWLAN_TRIG_WAKEUP_TCP_NOMORETOKENS: For wakeup reporting only,
+ *      the TCP connection ran out of tokens to use for data to send to the
+ *      service
  * @NUM_NL80211_WOWLAN_TRIG: number of wake on wireless triggers
  * @MAX_NL80211_WOWLAN_TRIG: highest wowlan trigger attribute number
+ *
+ * These nested attributes are used to configure the wakeup triggers and
+ * to report the wakeup reason(s).
  */
 enum nl80211_wowlan_triggers {
         __NL80211_WOWLAN_TRIG_INVALID,
@@ -2891,6 +3073,14 @@ enum nl80211_wowlan_triggers {
         NL80211_WOWLAN_TRIG_EAP_IDENT_REQUEST,
         NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE,
         NL80211_WOWLAN_TRIG_RFKILL_RELEASE,
+        NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211,
+        NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211_LEN,
+        NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023,
+        NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023_LEN,
+        NL80211_WOWLAN_TRIG_TCP_CONNECTION,
+        NL80211_WOWLAN_TRIG_WAKEUP_TCP_MATCH,
+        NL80211_WOWLAN_TRIG_WAKEUP_TCP_CONNLOST,
+        NL80211_WOWLAN_TRIG_WAKEUP_TCP_NOMORETOKENS,
 
         /* keep last */
         NUM_NL80211_WOWLAN_TRIG,
@@ -2898,6 +3088,116 @@ enum nl80211_wowlan_triggers {
 };
 
 /**
+ * DOC: TCP connection wakeup
+ *
+ * Some devices can establish a TCP connection in order to be woken up by a
+ * packet coming in from outside their network segment, or behind NAT. If
+ * configured, the device will establish a TCP connection to the given
+ * service, and periodically send data to that service. The first data
+ * packet is usually transmitted after SYN/ACK, also ACKing the SYN/ACK.
+ * The data packets can optionally include a (little endian) sequence
+ * number (in the TCP payload!) that is generated by the device, and, also
+ * optionally, a token from a list of tokens. This serves as a keep-alive
+ * with the service, and for NATed connections, etc.
+ *
+ * During this keep-alive period, the server doesn't send any data to the
+ * client. When receiving data, it is compared against the wakeup pattern
+ * (and mask) and if it matches, the host is woken up. Similarly, if the
+ * connection breaks or cannot be established to start with, the host is
+ * also woken up.
+ *
+ * Developer's note: ARP offload is required for this, otherwise TCP
+ * response packets might not go through correctly.
+ */
+
+/**
+ * struct nl80211_wowlan_tcp_data_seq - WoWLAN TCP data sequence
+ * @start: starting value
+ * @offset: offset of sequence number in packet
+ * @len: length of the sequence value to write, 1 through 4
+ *
+ * Note: don't confuse with the TCP sequence number(s), this is for the
+ * keepalive packet payload. The actual value is written into the packet
+ * in little endian.
+ */
+struct nl80211_wowlan_tcp_data_seq {
+        __u32 start, offset, len;
+};
+
+/**
+ * struct nl80211_wowlan_tcp_data_token - WoWLAN TCP data token config
+ * @offset: offset of token in packet
+ * @len: length of each token
+ * @token_stream: stream of data to be used for the tokens, the length must
+ *      be a multiple of @len for this to make sense
+ */
+struct nl80211_wowlan_tcp_data_token {
+        __u32 offset, len;
+        __u8 token_stream[];
+};
+
+/**
+ * struct nl80211_wowlan_tcp_data_token_feature - data token features
+ * @min_len: minimum token length
+ * @max_len: maximum token length
+ * @bufsize: total available token buffer size (max size of @token_stream)
+ */
+struct nl80211_wowlan_tcp_data_token_feature {
+        __u32 min_len, max_len, bufsize;
+};
+
+/**
+ * enum nl80211_wowlan_tcp_attrs - WoWLAN TCP connection parameters
+ * @__NL80211_WOWLAN_TCP_INVALID: invalid number for nested attributes
+ * @NL80211_WOWLAN_TCP_SRC_IPV4: source IPv4 address (in network byte order)
+ * @NL80211_WOWLAN_TCP_DST_IPV4: destination IPv4 address
+ *      (in network byte order)
+ * @NL80211_WOWLAN_TCP_DST_MAC: destination MAC address, this is given because
+ *      route lookup when configured might be invalid by the time we suspend,
+ *      and doing a route lookup when suspending is no longer possible as it
+ *      might require ARP querying.
+ * @NL80211_WOWLAN_TCP_SRC_PORT: source port (u16); optional, if not given a
+ *      socket and port will be allocated
+ * @NL80211_WOWLAN_TCP_DST_PORT: destination port (u16)
+ * @NL80211_WOWLAN_TCP_DATA_PAYLOAD: data packet payload, at least one byte.
+ *      For feature advertising, a u32 attribute holding the maximum length
+ *      of the data payload.
+ * @NL80211_WOWLAN_TCP_DATA_PAYLOAD_SEQ: data packet sequence configuration
+ *      (if desired), a &struct nl80211_wowlan_tcp_data_seq. For feature
+ *      advertising it is just a flag
+ * @NL80211_WOWLAN_TCP_DATA_PAYLOAD_TOKEN: data packet token configuration,
+ *      see &struct nl80211_wowlan_tcp_data_token and for advertising see
+ *      &struct nl80211_wowlan_tcp_data_token_feature.
+ * @NL80211_WOWLAN_TCP_DATA_INTERVAL: data interval in seconds, maximum
+ *      interval in feature advertising (u32)
+ * @NL80211_WOWLAN_TCP_WAKE_PAYLOAD: wake packet payload, for advertising a
+ *      u32 attribute holding the maximum length
+ * @NL80211_WOWLAN_TCP_WAKE_MASK: Wake packet payload mask, not used for
+ *      feature advertising. The mask works like @NL80211_WOWLAN_PKTPAT_MASK
+ *      but on the TCP payload only.
+ * @NUM_NL80211_WOWLAN_TCP: number of TCP attributes
+ * @MAX_NL80211_WOWLAN_TCP: highest attribute number
+ */
+enum nl80211_wowlan_tcp_attrs {
+        __NL80211_WOWLAN_TCP_INVALID,
+        NL80211_WOWLAN_TCP_SRC_IPV4,
+        NL80211_WOWLAN_TCP_DST_IPV4,
+        NL80211_WOWLAN_TCP_DST_MAC,
+        NL80211_WOWLAN_TCP_SRC_PORT,
+        NL80211_WOWLAN_TCP_DST_PORT,
+        NL80211_WOWLAN_TCP_DATA_PAYLOAD,
+        NL80211_WOWLAN_TCP_DATA_PAYLOAD_SEQ,
+        NL80211_WOWLAN_TCP_DATA_PAYLOAD_TOKEN,
+        NL80211_WOWLAN_TCP_DATA_INTERVAL,
+        NL80211_WOWLAN_TCP_WAKE_PAYLOAD,
+        NL80211_WOWLAN_TCP_WAKE_MASK,
+
+        /* keep last */
+        NUM_NL80211_WOWLAN_TCP,
+        MAX_NL80211_WOWLAN_TCP = NUM_NL80211_WOWLAN_TCP - 1
+};
+
+/**
  * enum nl80211_iface_limit_attrs - limit attributes
  * @NL80211_IFACE_LIMIT_UNSPEC: (reserved)
  * @NL80211_IFACE_LIMIT_MAX: maximum number of interfaces that
@@ -2933,6 +3233,8 @@ enum nl80211_iface_limit_attrs {
  *      the infrastructure network's beacon interval.
  * @NL80211_IFACE_COMB_NUM_CHANNELS: u32 attribute specifying how many
  *      different channels may be used within this group.
+ * @NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS: u32 attribute containing the bitmap
+ *      of supported channel widths for radar detection.
  * @NUM_NL80211_IFACE_COMB: number of attributes
  * @MAX_NL80211_IFACE_COMB: highest attribute number
  *
@@ -2965,6 +3267,7 @@ enum nl80211_if_combination_attrs {
         NL80211_IFACE_COMB_MAXNUM,
         NL80211_IFACE_COMB_STA_AP_BI_MATCH,
         NL80211_IFACE_COMB_NUM_CHANNELS,
+        NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS,
 
         /* keep last */
         NUM_NL80211_IFACE_COMB,
@@ -3140,6 +3443,19 @@ enum nl80211_ap_sme_features {
  *      setting
  * @NL80211_FEATURE_P2P_GO_OPPPS: P2P GO implementation supports opportunistic
  *      powersave
+ * @NL80211_FEATURE_FULL_AP_CLIENT_STATE: The driver supports full state
+ *      transitions for AP clients. Without this flag (and if the driver
+ *      doesn't have the AP SME in the device) the driver supports adding
+ *      stations only when they're associated and adds them in associated
+ *      state (to later be transitioned into authorized), with this flag
+ *      they should be added before even sending the authentication reply
+ *      and then transitioned into authenticated, associated and authorized
+ *      states using station flags.
+ *      Note that even for drivers that support this, the default is to add
+ *      stations in authenticated/associated state, so to add unauthenticated
+ *      stations the authenticated/associated bits have to be set in the mask.
+ * @NL80211_FEATURE_ADVERTISE_CHAN_LIMITS: cfg80211 advertises channel limits
+ *      (HT40, VHT 80/160 MHz) if this flag is set
  */
 enum nl80211_feature_flags {
         NL80211_FEATURE_SK_TX_STATUS                    = 1 << 0,
@@ -3155,6 +3471,9 @@ enum nl80211_feature_flags {
         NL80211_FEATURE_NEED_OBSS_SCAN                  = 1 << 10,
         NL80211_FEATURE_P2P_GO_CTWIN                    = 1 << 11,
         NL80211_FEATURE_P2P_GO_OPPPS                    = 1 << 12,
+        /* bit 13 is reserved */
+        NL80211_FEATURE_ADVERTISE_CHAN_LIMITS           = 1 << 14,
+        NL80211_FEATURE_FULL_AP_CLIENT_STATE            = 1 << 15,
 };
 
 /**
@@ -3182,7 +3501,7 @@ enum nl80211_probe_resp_offload_support_attr {
  * enum nl80211_connect_failed_reason - connection request failed reasons
  * @NL80211_CONN_FAIL_MAX_CLIENTS: Maximum number of clients that can be
  *      handled by the AP is reached.
- * @NL80211_CONN_FAIL_BLOCKED_CLIENT: Client's MAC is in the AP's blocklist.
+ * @NL80211_CONN_FAIL_BLOCKED_CLIENT: Connection request is rejected due to ACL.
  */
 enum nl80211_connect_failed_reason {
         NL80211_CONN_FAIL_MAX_CLIENTS,
@@ -3210,4 +3529,62 @@ enum nl80211_scan_flags {
         NL80211_SCAN_FLAG_AP                            = 1<<2,
 };
 
+/**
+ * enum nl80211_acl_policy - access control policy
+ *
+ * Access control policy is applied on a MAC list set by
+ * %NL80211_CMD_START_AP and %NL80211_CMD_SET_MAC_ACL, to
+ * be used with %NL80211_ATTR_ACL_POLICY.
+ *
+ * @NL80211_ACL_POLICY_ACCEPT_UNLESS_LISTED: Deny stations which are
+ *      listed in ACL, i.e. allow all the stations which are not listed
+ *      in ACL to authenticate.
+ * @NL80211_ACL_POLICY_DENY_UNLESS_LISTED: Allow the stations which are listed
+ *      in ACL, i.e. deny all the stations which are not listed in ACL.
+ */
+enum nl80211_acl_policy {
+        NL80211_ACL_POLICY_ACCEPT_UNLESS_LISTED,
+        NL80211_ACL_POLICY_DENY_UNLESS_LISTED,
+};
+
+/**
+ * enum nl80211_radar_event - type of radar event for DFS operation
+ *
+ * Type of event to be used with NL80211_ATTR_RADAR_EVENT to inform userspace
+ * about detected radars or success of the channel available check (CAC)
+ *
+ * @NL80211_RADAR_DETECTED: A radar pattern has been detected. The channel is
+ *      now unusable.
+ * @NL80211_RADAR_CAC_FINISHED: Channel Availability Check has been finished,
+ *      the channel is now available.
+ * @NL80211_RADAR_CAC_ABORTED: Channel Availability Check has been aborted, no
+ *      change to the channel status.
+ * @NL80211_RADAR_NOP_FINISHED: The Non-Occupancy Period for this channel is
+ *      over, channel becomes usable.
+ */
+enum nl80211_radar_event {
+        NL80211_RADAR_DETECTED,
+        NL80211_RADAR_CAC_FINISHED,
+        NL80211_RADAR_CAC_ABORTED,
+        NL80211_RADAR_NOP_FINISHED,
+};
+
+/**
+ * enum nl80211_dfs_state - DFS states for channels
+ *
+ * Channel states used by the DFS code.
+ *
+ * @IEEE80211_DFS_USABLE: The channel can be used, but channel availability
+ *      check (CAC) must be performed before using it for AP or IBSS.
+ * @IEEE80211_DFS_UNAVAILABLE: A radar has been detected on this channel, it
+ *      is therefore marked as not available.
+ * @IEEE80211_DFS_AVAILABLE: The channel has been CAC checked and is available.
+ */
+
+enum nl80211_dfs_state {
+        NL80211_DFS_USABLE,
+        NL80211_DFS_UNAVAILABLE,
+        NL80211_DFS_AVAILABLE,
+};
+
 #endif /* __LINUX_NL80211_H */