5 files changed, 39 insertions, 125 deletions

diff --git a/include/linux/fb.h b/include/linux/fb.h
index 04a58f33ec53..a973be2cfe61 100644
--- a/include/linux/fb.h
+++ b/include/linux/fb.h
@@ -617,6 +617,12 @@ struct fb_ops {
 
         /* perform fb specific mmap */
         int (*fb_mmap)(struct fb_info *info, struct file *file, struct vm_area_struct *vma);
+
+        /* save current hardware state */
+        void (*fb_save_state)(struct fb_info *info);
+
+        /* restore saved state */
+        void (*fb_restore_state)(struct fb_info *info);
 };
 
 #ifdef CONFIG_FB_TILEBLITTING
@@ -726,6 +732,18 @@ struct fb_tile_ops {
                                                   from userspace */
 #define FBINFO_MISC_TILEBLITTING       0x20000 /* use tile blitting */
 
+/* A driver may set this flag to indicate that it does want a set_par to be
+ * called every time when fbcon_switch is executed. The advantage is that with
+ * this flag set you can really be shure that set_par is always called before
+ * any of the functions dependant on the correct hardware state or altering
+ * that state, even if you are using some broken X releases. The disadvantage
+ * is that it introduces unwanted delays to every console switch if set_par
+ * is slow. It is a good idea to try this flag in the drivers initialization
+ * code whenever there is a bug report related to switching between X and the
+ * framebuffer console.
+ */
+#define FBINFO_MISC_ALWAYS_SETPAR   0x40000
+
 struct fb_info {
         int node;
         int flags;
@@ -817,6 +835,18 @@ struct fb_info {
 
 #endif
 
+#if defined (__BIG_ENDIAN)
+#define FB_LEFT_POS(bpp)          (32 - bpp)
+#define FB_SHIFT_HIGH(val, bits)  ((val) >> (bits))
+#define FB_SHIFT_LOW(val, bits)   ((val) << (bits))
+#define FB_BIT_NR(b)              (7 - (b))
+#else
+#define FB_LEFT_POS(bpp)          (0)
+#define FB_SHIFT_HIGH(val, bits)  ((val) << (bits))
+#define FB_SHIFT_LOW(val, bits)   ((val) >> (bits))
+#define FB_BIT_NR(b)              (b)
+#endif
+
     /*
      *  `Generic' versions of the frame buffer device operations
      */
diff --git a/include/linux/ide.h b/include/linux/ide.h
index a39c3c59789d..7b6a6a58e465 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -23,17 +23,6 @@
 #include <asm/io.h>
 #include <asm/semaphore.h>
 
-/*
- * This is the multiple IDE interface driver, as evolved from hd.c.
- * It supports up to four IDE interfaces, on one or more IRQs (usually 14 & 15).
- * There can be up to two drives per interface, as per the ATA-2 spec.
- *
- * Primary i/f:    ide0: major=3;  (hda)         minor=0; (hdb)         minor=64
- * Secondary i/f:  ide1: major=22; (hdc or hd1a) minor=0; (hdd or hd1b) minor=64
- * Tertiary i/f:   ide2: major=33; (hde)         minor=0; (hdf)         minor=64
- * Quaternary i/f: ide3: major=34; (hdg)         minor=0; (hdh)         minor=64
- */
-
 /******************************************************************************
  * IDE driver configuration options (play with these as desired):
  *
@@ -193,11 +182,6 @@ typedef unsigned char	byte;	/* used everywhere */
 #define WAIT_CMD        (10*HZ) /* 10sec  - maximum wait for an IRQ to happen */
 #define WAIT_MIN_SLEEP  (2*HZ/100)      /* 20msec - minimum sleep time */
 
-#define HOST(hwif,chipset)                                      \
-{                                                               \
-        return ((hwif)->chipset == chipset) ? 1 : 0;            \
-}
-
 /*
  * Check for an interrupt and acknowledge the interrupt status
  */
@@ -391,45 +375,6 @@ typedef union {
 } ata_nsector_t, ata_data_t, atapi_bcount_t, ata_index_t;
 
 /*
- * ATA-IDE Error Register
- *
- * mark         : Bad address mark
- * tzero        : Couldn't find track 0
- * abrt         : Aborted Command
- * mcr          : Media Change Request
- * id           : ID field not found
- * mce          : Media Change Event
- * ecc          : Uncorrectable ECC error
- * bdd          : dual meaing
- */
-typedef union {
-        unsigned all                    :8;
-        struct {
-#if defined(__LITTLE_ENDIAN_BITFIELD)
-                unsigned mark           :1;
-                unsigned tzero          :1;
-                unsigned abrt           :1;
-                unsigned mcr            :1;
-                unsigned id             :1;
-                unsigned mce            :1;
-                unsigned ecc            :1;
-                unsigned bdd            :1;
-#elif defined(__BIG_ENDIAN_BITFIELD)
-                unsigned bdd            :1;
-                unsigned ecc            :1;
-                unsigned mce            :1;
-                unsigned id             :1;
-                unsigned mcr            :1;
-                unsigned abrt           :1;
-                unsigned tzero          :1;
-                unsigned mark           :1;
-#else
-#error "Please fix <asm/byteorder.h>"
-#endif
-        } b;
-} ata_error_t;
-
-/*
  * ATA-IDE Select Register, aka Device-Head
  *
  * head         : always zeros here
@@ -504,39 +449,6 @@ typedef union {
 } ata_status_t, atapi_status_t;
 
 /*
- * ATA-IDE Control Register
- *
- * bit0         : Should be set to zero
- * nIEN         : device INTRQ to host
- * SRST         : host soft reset bit
- * bit3         : ATA-2 thingy, Should be set to 1
- * reserved456  : Reserved
- * HOB          : 48-bit address ordering, High Ordered Bit
- */
-typedef union {
-        unsigned all                    : 8;
-        struct {
-#if defined(__LITTLE_ENDIAN_BITFIELD)
-                unsigned bit0           : 1;
-                unsigned nIEN           : 1;
-                unsigned SRST           : 1;
-                unsigned bit3           : 1;
-                unsigned reserved456    : 3;
-                unsigned HOB            : 1;
-#elif defined(__BIG_ENDIAN_BITFIELD)
-                unsigned HOB            : 1;
-                unsigned reserved456    : 3;
-                unsigned bit3           : 1;
-                unsigned SRST           : 1;
-                unsigned nIEN           : 1;
-                unsigned bit0           : 1;
-#else
-#error "Please fix <asm/byteorder.h>"
-#endif
-        } b;
-} ata_control_t;
-
-/*
  * ATAPI Feature Register
  *
  * dma          : Using DMA or PIO
@@ -618,39 +530,6 @@ typedef union {
 } atapi_error_t;
 
 /*
- * ATAPI floppy Drive Select Register
- *
- * sam_lun      : Logical unit number
- * reserved3    : Reserved
- * drv          : The responding drive will be drive 0 (0) or drive 1 (1)
- * one5         : Should be set to 1
- * reserved6    : Reserved
- * one7         : Should be set to 1
- */
-typedef union {
-        unsigned all                    :8;
-        struct {
-#if defined(__LITTLE_ENDIAN_BITFIELD)
-                unsigned sam_lun        :3;
-                unsigned reserved3      :1;
-                unsigned drv            :1;
-                unsigned one5           :1;
-                unsigned reserved6      :1;
-                unsigned one7           :1;
-#elif defined(__BIG_ENDIAN_BITFIELD)
-                unsigned one7           :1;
-                unsigned reserved6      :1;
-                unsigned one5           :1;
-                unsigned drv            :1;
-                unsigned reserved3      :1;
-                unsigned sam_lun        :3;
-#else
-#error "Please fix <asm/byteorder.h>"
-#endif
-        } b;
-} atapi_select_t;
-
-/*
  * Status returned from various ide_ functions
  */
 typedef enum {
@@ -1101,10 +980,7 @@ typedef struct ide_driver_s {
         int             (*end_request)(ide_drive_t *, int, int);
         ide_startstop_t (*error)(ide_drive_t *, struct request *rq, u8, u8);
         ide_startstop_t (*abort)(ide_drive_t *, struct request *rq);
-        int             (*ioctl)(ide_drive_t *, struct inode *, struct file *, unsigned int, unsigned long);
         ide_proc_entry_t        *proc;
-        void            (*ata_prebuilder)(ide_drive_t *);
-        void            (*atapi_prebuilder)(ide_drive_t *);
         struct device_driver    gen_driver;
 } ide_driver_t;
 
@@ -1298,7 +1174,6 @@ extern int ide_spin_wait_hwgroup(ide_drive_t *);
 extern void ide_timer_expiry(unsigned long);
 extern irqreturn_t ide_intr(int irq, void *dev_id, struct pt_regs *regs);
 extern void do_ide_request(request_queue_t *);
-extern void ide_init_subdrivers(void);
 
 void ide_init_disk(struct gendisk *, ide_drive_t *);
 
@@ -1371,6 +1246,12 @@ void ide_init_sg_cmd(ide_drive_t *, struct request *);
 #define GOOD_DMA_DRIVE          1
 
 #ifdef CONFIG_BLK_DEV_IDEDMA
+struct drive_list_entry {
+        const char *id_model;
+        const char *id_firmware;
+};
+
+int ide_in_drive_list(struct hd_driveid *, const struct drive_list_entry *);
 int __ide_dma_bad_drive(ide_drive_t *);
 int __ide_dma_good_drive(ide_drive_t *);
 int ide_use_dma(ide_drive_t *);
diff --git a/include/linux/libata.h b/include/linux/libata.h
index f2dbb684ce9e..41ea7dbc1755 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -122,6 +122,7 @@ enum {
         ATA_FLAG_NOINTR         = (1 << 9), /* FIXME: Remove this once
                                              * proper HSM is in place. */
         ATA_FLAG_DEBUGMSG       = (1 << 10),
+        ATA_FLAG_NO_ATAPI       = (1 << 11), /* No ATAPI support */
 
         ATA_QCFLAG_ACTIVE       = (1 << 1), /* cmd not yet ack'd to scsi lyer */
         ATA_QCFLAG_SG           = (1 << 3), /* have s/g table? */
diff --git a/include/linux/mm.h b/include/linux/mm.h
index e5677f456742..a06a84d347fb 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -163,6 +163,7 @@ extern unsigned int kobjsize(const void *objp);
 #define VM_HUGETLB      0x00400000      /* Huge TLB Page VM */
 #define VM_NONLINEAR    0x00800000      /* Is non-linear (remap_file_pages) */
 #define VM_MAPPED_COPY  0x01000000      /* T if mapped copy of data (nommu mmap) */
+#define VM_INSERTPAGE   0x02000000      /* The vma has had "vm_insert_page()" done on it */
 
 #ifndef VM_STACK_DEFAULT_FLAGS          /* arch can override this */
 #define VM_STACK_DEFAULT_FLAGS VM_DATA_DEFAULT_FLAGS
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 1e737e269db9..4db67b3b05cc 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -1244,6 +1244,7 @@
 #define PCI_DEVICE_ID_VIA_8378_0        0x3205
 #define PCI_DEVICE_ID_VIA_8783_0        0x3208
 #define PCI_DEVICE_ID_VIA_8237          0x3227
+#define PCI_DEVICE_ID_VIA_8251          0x3287
 #define PCI_DEVICE_ID_VIA_3296_0        0x0296
 #define PCI_DEVICE_ID_VIA_8231          0x8231
 #define PCI_DEVICE_ID_VIA_8231_4        0x8235