aboutsummaryrefslogtreecommitdiffstats
path: root/include/linux/usb
diff options
context:
space:
mode:
Diffstat (limited to 'include/linux/usb')
-rw-r--r--include/linux/usb/ch11.h2
-rw-r--r--include/linux/usb/ch9.h58
-rw-r--r--include/linux/usb/chipidea.h28
-rw-r--r--include/linux/usb/composite.h6
-rw-r--r--include/linux/usb/functionfs.h4
-rw-r--r--include/linux/usb/gpio_vbus.h2
-rw-r--r--include/linux/usb/hcd.h32
-rw-r--r--include/linux/usb/isp1301.h80
-rw-r--r--include/linux/usb/langwell_udc.h310
-rw-r--r--include/linux/usb/rndis_host.h66
-rw-r--r--include/linux/usb/serial.h34
11 files changed, 211 insertions, 411 deletions
diff --git a/include/linux/usb/ch11.h b/include/linux/usb/ch11.h
index f1d26b6067f1..b6c2863b2c94 100644
--- a/include/linux/usb/ch11.h
+++ b/include/linux/usb/ch11.h
@@ -76,6 +76,8 @@
76#define USB_PORT_FEAT_C_BH_PORT_RESET 29 76#define USB_PORT_FEAT_C_BH_PORT_RESET 29
77#define USB_PORT_FEAT_FORCE_LINKPM_ACCEPT 30 77#define USB_PORT_FEAT_FORCE_LINKPM_ACCEPT 30
78 78
79#define USB_PORT_LPM_TIMEOUT(p) (((p) & 0xff) << 8)
80
79/* USB 3.0 hub remote wake mask bits, see table 10-14 */ 81/* USB 3.0 hub remote wake mask bits, see table 10-14 */
80#define USB_PORT_FEAT_REMOTE_WAKE_CONNECT (1 << 8) 82#define USB_PORT_FEAT_REMOTE_WAKE_CONNECT (1 << 8)
81#define USB_PORT_FEAT_REMOTE_WAKE_DISCONNECT (1 << 9) 83#define USB_PORT_FEAT_REMOTE_WAKE_DISCONNECT (1 << 9)
diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h
index af21f3115919..d1d732c2838d 100644
--- a/include/linux/usb/ch9.h
+++ b/include/linux/usb/ch9.h
@@ -88,6 +88,8 @@
88#define USB_REQ_GET_INTERFACE 0x0A 88#define USB_REQ_GET_INTERFACE 0x0A
89#define USB_REQ_SET_INTERFACE 0x0B 89#define USB_REQ_SET_INTERFACE 0x0B
90#define USB_REQ_SYNCH_FRAME 0x0C 90#define USB_REQ_SYNCH_FRAME 0x0C
91#define USB_REQ_SET_SEL 0x30
92#define USB_REQ_SET_ISOCH_DELAY 0x31
91 93
92#define USB_REQ_SET_ENCRYPTION 0x0D /* Wireless USB */ 94#define USB_REQ_SET_ENCRYPTION 0x0D /* Wireless USB */
93#define USB_REQ_GET_ENCRYPTION 0x0E 95#define USB_REQ_GET_ENCRYPTION 0x0E
@@ -390,6 +392,11 @@ struct usb_endpoint_descriptor {
390#define USB_ENDPOINT_XFER_INT 3 392#define USB_ENDPOINT_XFER_INT 3
391#define USB_ENDPOINT_MAX_ADJUSTABLE 0x80 393#define USB_ENDPOINT_MAX_ADJUSTABLE 0x80
392 394
395/* The USB 3.0 spec redefines bits 5:4 of bmAttributes as interrupt ep type. */
396#define USB_ENDPOINT_INTRTYPE 0x30
397#define USB_ENDPOINT_INTR_PERIODIC (0 << 4)
398#define USB_ENDPOINT_INTR_NOTIFICATION (1 << 4)
399
393#define USB_ENDPOINT_SYNCTYPE 0x0c 400#define USB_ENDPOINT_SYNCTYPE 0x0c
394#define USB_ENDPOINT_SYNC_NONE (0 << 2) 401#define USB_ENDPOINT_SYNC_NONE (0 << 2)
395#define USB_ENDPOINT_SYNC_ASYNC (1 << 2) 402#define USB_ENDPOINT_SYNC_ASYNC (1 << 2)
@@ -592,6 +599,12 @@ static inline int usb_endpoint_maxp(const struct usb_endpoint_descriptor *epd)
592 return __le16_to_cpu(epd->wMaxPacketSize); 599 return __le16_to_cpu(epd->wMaxPacketSize);
593} 600}
594 601
602static inline int usb_endpoint_interrupt_type(
603 const struct usb_endpoint_descriptor *epd)
604{
605 return epd->bmAttributes & USB_ENDPOINT_INTRTYPE;
606}
607
595/*-------------------------------------------------------------------------*/ 608/*-------------------------------------------------------------------------*/
596 609
597/* USB_DT_SS_ENDPOINT_COMP: SuperSpeed Endpoint Companion descriptor */ 610/* USB_DT_SS_ENDPOINT_COMP: SuperSpeed Endpoint Companion descriptor */
@@ -933,6 +946,51 @@ enum usb_device_state {
933 */ 946 */
934}; 947};
935 948
949enum usb3_link_state {
950 USB3_LPM_U0 = 0,
951 USB3_LPM_U1,
952 USB3_LPM_U2,
953 USB3_LPM_U3
954};
955
956/*
957 * A U1 timeout of 0x0 means the parent hub will reject any transitions to U1.
958 * 0xff means the parent hub will accept transitions to U1, but will not
959 * initiate a transition.
960 *
961 * A U1 timeout of 0x1 to 0x7F also causes the hub to initiate a transition to
962 * U1 after that many microseconds. Timeouts of 0x80 to 0xFE are reserved
963 * values.
964 *
965 * A U2 timeout of 0x0 means the parent hub will reject any transitions to U2.
966 * 0xff means the parent hub will accept transitions to U2, but will not
967 * initiate a transition.
968 *
969 * A U2 timeout of 0x1 to 0xFE also causes the hub to initiate a transition to
970 * U2 after N*256 microseconds. Therefore a U2 timeout value of 0x1 means a U2
971 * idle timer of 256 microseconds, 0x2 means 512 microseconds, 0xFE means
972 * 65.024ms.
973 */
974#define USB3_LPM_DISABLED 0x0
975#define USB3_LPM_U1_MAX_TIMEOUT 0x7F
976#define USB3_LPM_U2_MAX_TIMEOUT 0xFE
977#define USB3_LPM_DEVICE_INITIATED 0xFF
978
979struct usb_set_sel_req {
980 __u8 u1_sel;
981 __u8 u1_pel;
982 __le16 u2_sel;
983 __le16 u2_pel;
984} __attribute__ ((packed));
985
986/*
987 * The Set System Exit Latency control transfer provides one byte each for
988 * U1 SEL and U1 PEL, so the max exit latency is 0xFF. U2 SEL and U2 PEL each
989 * are two bytes long.
990 */
991#define USB3_LPM_MAX_U1_SEL_PEL 0xFF
992#define USB3_LPM_MAX_U2_SEL_PEL 0xFFFF
993
936/*-------------------------------------------------------------------------*/ 994/*-------------------------------------------------------------------------*/
937 995
938/* 996/*
diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h
new file mode 100644
index 000000000000..edb90d6cfd12
--- /dev/null
+++ b/include/linux/usb/chipidea.h
@@ -0,0 +1,28 @@
1/*
2 * Platform data for the chipidea USB dual role controller
3 */
4
5#ifndef __LINUX_USB_CHIPIDEA_H
6#define __LINUX_USB_CHIPIDEA_H
7
8struct ci13xxx;
9struct ci13xxx_udc_driver {
10 const char *name;
11 /* offset of the capability registers */
12 uintptr_t capoffset;
13 unsigned power_budget;
14 unsigned long flags;
15#define CI13XXX_REGS_SHARED BIT(0)
16#define CI13XXX_REQUIRE_TRANSCEIVER BIT(1)
17#define CI13XXX_PULLUP_ON_VBUS BIT(2)
18#define CI13XXX_DISABLE_STREAMING BIT(3)
19
20#define CI13XXX_CONTROLLER_RESET_EVENT 0
21#define CI13XXX_CONTROLLER_STOPPED_EVENT 1
22 void (*notify_event) (struct ci13xxx *udc, unsigned event);
23};
24
25/* Default offset of capability registers */
26#define DEF_CAPOFFSET 0x100
27
28#endif
diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h
index a316fba73518..9d8c3b634493 100644
--- a/include/linux/usb/composite.h
+++ b/include/linux/usb/composite.h
@@ -242,6 +242,9 @@ int usb_add_config(struct usb_composite_dev *,
242 struct usb_configuration *, 242 struct usb_configuration *,
243 int (*)(struct usb_configuration *)); 243 int (*)(struct usb_configuration *));
244 244
245void usb_remove_config(struct usb_composite_dev *,
246 struct usb_configuration *);
247
245/** 248/**
246 * struct usb_composite_driver - groups configurations into a gadget 249 * struct usb_composite_driver - groups configurations into a gadget
247 * @name: For diagnostics, identifies the driver. 250 * @name: For diagnostics, identifies the driver.
@@ -250,6 +253,8 @@ int usb_add_config(struct usb_composite_dev *,
250 * @iManufacturer: Used as iManufacturer override if @dev->iManufacturer is 253 * @iManufacturer: Used as iManufacturer override if @dev->iManufacturer is
251 * not set. If NULL a default "<system> <release> with <udc>" value 254 * not set. If NULL a default "<system> <release> with <udc>" value
252 * will be used. 255 * will be used.
256 * @iSerialNumber: Used as iSerialNumber override if @dev->iSerialNumber is
257 * not set.
253 * @dev: Template descriptor for the device, including default device 258 * @dev: Template descriptor for the device, including default device
254 * identifiers. 259 * identifiers.
255 * @strings: tables of strings, keyed by identifiers assigned during bind() 260 * @strings: tables of strings, keyed by identifiers assigned during bind()
@@ -280,6 +285,7 @@ struct usb_composite_driver {
280 const char *name; 285 const char *name;
281 const char *iProduct; 286 const char *iProduct;
282 const char *iManufacturer; 287 const char *iManufacturer;
288 const char *iSerialNumber;
283 const struct usb_device_descriptor *dev; 289 const struct usb_device_descriptor *dev;
284 struct usb_gadget_strings **strings; 290 struct usb_gadget_strings **strings;
285 enum usb_device_speed max_speed; 291 enum usb_device_speed max_speed;
diff --git a/include/linux/usb/functionfs.h b/include/linux/usb/functionfs.h
index 7587ef934ba8..a843d0851364 100644
--- a/include/linux/usb/functionfs.h
+++ b/include/linux/usb/functionfs.h
@@ -190,8 +190,10 @@ static int functionfs_ready_callback(struct ffs_data *ffs)
190 __attribute__((warn_unused_result, nonnull)); 190 __attribute__((warn_unused_result, nonnull));
191static void functionfs_closed_callback(struct ffs_data *ffs) 191static void functionfs_closed_callback(struct ffs_data *ffs)
192 __attribute__((nonnull)); 192 __attribute__((nonnull));
193static int functionfs_check_dev_callback(const char *dev_name) 193static void *functionfs_acquire_dev_callback(const char *dev_name)
194 __attribute__((warn_unused_result, nonnull)); 194 __attribute__((warn_unused_result, nonnull));
195static void functionfs_release_dev_callback(struct ffs_data *ffs_data)
196 __attribute__((nonnull));
195 197
196 198
197#endif 199#endif
diff --git a/include/linux/usb/gpio_vbus.h b/include/linux/usb/gpio_vbus.h
index d9f03ccc2d60..837bba604a0b 100644
--- a/include/linux/usb/gpio_vbus.h
+++ b/include/linux/usb/gpio_vbus.h
@@ -17,6 +17,7 @@
17 * @gpio_pullup: optional D+ or D- pullup GPIO (else negative/invalid) 17 * @gpio_pullup: optional D+ or D- pullup GPIO (else negative/invalid)
18 * @gpio_vbus_inverted: true if gpio_vbus is active low 18 * @gpio_vbus_inverted: true if gpio_vbus is active low
19 * @gpio_pullup_inverted: true if gpio_pullup is active low 19 * @gpio_pullup_inverted: true if gpio_pullup is active low
20 * @wakeup: configure gpio_vbus as a wake-up source
20 * 21 *
21 * The VBUS sensing GPIO should have a pulldown, which will normally be 22 * The VBUS sensing GPIO should have a pulldown, which will normally be
22 * part of a resistor ladder turning a 4.0V-5.25V level on VBUS into a 23 * part of a resistor ladder turning a 4.0V-5.25V level on VBUS into a
@@ -27,4 +28,5 @@ struct gpio_vbus_mach_info {
27 int gpio_pullup; 28 int gpio_pullup;
28 bool gpio_vbus_inverted; 29 bool gpio_vbus_inverted;
29 bool gpio_pullup_inverted; 30 bool gpio_pullup_inverted;
31 bool wakeup;
30}; 32};
diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h
index d28cc78a38e4..7f855d50cdf5 100644
--- a/include/linux/usb/hcd.h
+++ b/include/linux/usb/hcd.h
@@ -344,6 +344,15 @@ struct hc_driver {
344 */ 344 */
345 int (*update_device)(struct usb_hcd *, struct usb_device *); 345 int (*update_device)(struct usb_hcd *, struct usb_device *);
346 int (*set_usb2_hw_lpm)(struct usb_hcd *, struct usb_device *, int); 346 int (*set_usb2_hw_lpm)(struct usb_hcd *, struct usb_device *, int);
347 /* USB 3.0 Link Power Management */
348 /* Returns the USB3 hub-encoded value for the U1/U2 timeout. */
349 int (*enable_usb3_lpm_timeout)(struct usb_hcd *,
350 struct usb_device *, enum usb3_link_state state);
351 /* The xHCI host controller can still fail the command to
352 * disable the LPM timeouts, so this can return an error code.
353 */
354 int (*disable_usb3_lpm_timeout)(struct usb_hcd *,
355 struct usb_device *, enum usb3_link_state state);
347}; 356};
348 357
349extern int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb); 358extern int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb);
@@ -584,29 +593,6 @@ static inline void usb_hcd_resume_root_hub(struct usb_hcd *hcd)
584} 593}
585#endif /* CONFIG_USB_SUSPEND */ 594#endif /* CONFIG_USB_SUSPEND */
586 595
587
588/*
589 * USB device fs stuff
590 */
591
592#ifdef CONFIG_USB_DEVICEFS
593
594/*
595 * these are expected to be called from the USB core/hub thread
596 * with the kernel lock held
597 */
598extern void usbfs_update_special(void);
599extern int usbfs_init(void);
600extern void usbfs_cleanup(void);
601
602#else /* CONFIG_USB_DEVICEFS */
603
604static inline void usbfs_update_special(void) {}
605static inline int usbfs_init(void) { return 0; }
606static inline void usbfs_cleanup(void) { }
607
608#endif /* CONFIG_USB_DEVICEFS */
609
610/*-------------------------------------------------------------------------*/ 596/*-------------------------------------------------------------------------*/
611 597
612#if defined(CONFIG_USB_MON) || defined(CONFIG_USB_MON_MODULE) 598#if defined(CONFIG_USB_MON) || defined(CONFIG_USB_MON_MODULE)
diff --git a/include/linux/usb/isp1301.h b/include/linux/usb/isp1301.h
new file mode 100644
index 000000000000..d3a851c28b6a
--- /dev/null
+++ b/include/linux/usb/isp1301.h
@@ -0,0 +1,80 @@
1/*
2 * NXP ISP1301 USB transceiver driver
3 *
4 * Copyright (C) 2012 Roland Stigge <stigge@antcom.de>
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; version 2 of the License.
9 *
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
14 *
15 */
16
17#ifndef __LINUX_USB_ISP1301_H
18#define __LINUX_USB_ISP1301_H
19
20#include <linux/of.h>
21
22/* I2C Register definitions: */
23
24#define ISP1301_I2C_MODE_CONTROL_1 0x04 /* u8 read, set, +1 clear */
25
26#define MC1_SPEED_REG (1 << 0)
27#define MC1_SUSPEND_REG (1 << 1)
28#define MC1_DAT_SE0 (1 << 2)
29#define MC1_TRANSPARENT (1 << 3)
30#define MC1_BDIS_ACON_EN (1 << 4)
31#define MC1_OE_INT_EN (1 << 5)
32#define MC1_UART_EN (1 << 6)
33#define MC1_MASK 0x7f
34
35#define ISP1301_I2C_MODE_CONTROL_2 0x12 /* u8 read, set, +1 clear */
36
37#define MC2_GLOBAL_PWR_DN (1 << 0)
38#define MC2_SPD_SUSP_CTRL (1 << 1)
39#define MC2_BI_DI (1 << 2)
40#define MC2_TRANSP_BDIR0 (1 << 3)
41#define MC2_TRANSP_BDIR1 (1 << 4)
42#define MC2_AUDIO_EN (1 << 5)
43#define MC2_PSW_EN (1 << 6)
44#define MC2_EN2V7 (1 << 7)
45
46#define ISP1301_I2C_OTG_CONTROL_1 0x06 /* u8 read, set, +1 clear */
47
48#define OTG1_DP_PULLUP (1 << 0)
49#define OTG1_DM_PULLUP (1 << 1)
50#define OTG1_DP_PULLDOWN (1 << 2)
51#define OTG1_DM_PULLDOWN (1 << 3)
52#define OTG1_ID_PULLDOWN (1 << 4)
53#define OTG1_VBUS_DRV (1 << 5)
54#define OTG1_VBUS_DISCHRG (1 << 6)
55#define OTG1_VBUS_CHRG (1 << 7)
56
57#define ISP1301_I2C_OTG_CONTROL_2 0x10 /* u8 readonly */
58
59#define OTG_B_SESS_END (1 << 6)
60#define OTG_B_SESS_VLD (1 << 7)
61
62#define ISP1301_I2C_INTERRUPT_SOURCE 0x8
63#define ISP1301_I2C_INTERRUPT_LATCH 0xA
64#define ISP1301_I2C_INTERRUPT_FALLING 0xC
65#define ISP1301_I2C_INTERRUPT_RISING 0xE
66
67#define INT_VBUS_VLD (1 << 0)
68#define INT_SESS_VLD (1 << 1)
69#define INT_DP_HI (1 << 2)
70#define INT_ID_GND (1 << 3)
71#define INT_DM_HI (1 << 4)
72#define INT_ID_FLOAT (1 << 5)
73#define INT_BDIS_ACON (1 << 6)
74#define INT_CR_INT (1 << 7)
75
76#define ISP1301_I2C_REG_CLEAR_ADDR 1 /* Register Address Modifier */
77
78struct i2c_client *isp1301_get_client(struct device_node *node);
79
80#endif /* __LINUX_USB_ISP1301_H */
diff --git a/include/linux/usb/langwell_udc.h b/include/linux/usb/langwell_udc.h
deleted file mode 100644
index 2d2d1bbad9d2..000000000000
--- a/include/linux/usb/langwell_udc.h
+++ /dev/null
@@ -1,310 +0,0 @@
1/*
2 * Intel Langwell USB Device Controller driver
3 * Copyright (C) 2008-2009, Intel Corporation.
4 *
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms and conditions of the GNU General Public License,
7 * version 2, as published by the Free Software Foundation.
8 *
9 * This program is distributed in the hope it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
12 * more details.
13 *
14 * You should have received a copy of the GNU General Public License along with
15 * this program; if not, write to the Free Software Foundation, Inc.,
16 * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
17 *
18 */
19
20#ifndef __LANGWELL_UDC_H
21#define __LANGWELL_UDC_H
22
23
24/* MACRO defines */
25#define CAP_REG_OFFSET 0x0
26#define OP_REG_OFFSET 0x28
27
28#define DMA_ADDR_INVALID (~(dma_addr_t)0)
29
30#define DQH_ALIGNMENT 2048
31#define DTD_ALIGNMENT 64
32#define DMA_BOUNDARY 4096
33
34#define EP0_MAX_PKT_SIZE 64
35#define EP_DIR_IN 1
36#define EP_DIR_OUT 0
37
38#define FLUSH_TIMEOUT 1000
39#define RESET_TIMEOUT 1000
40#define SETUPSTAT_TIMEOUT 100
41#define PRIME_TIMEOUT 100
42
43
44/* device memory space registers */
45
46/* Capability Registers, BAR0 + CAP_REG_OFFSET */
47struct langwell_cap_regs {
48 /* offset: 0x0 */
49 u8 caplength; /* offset of Operational Register */
50 u8 _reserved3;
51 u16 hciversion; /* H: BCD encoding of host version */
52 u32 hcsparams; /* H: host port steering logic capability */
53 u32 hccparams; /* H: host multiple mode control capability */
54#define HCC_LEN BIT(17) /* Link power management (LPM) capability */
55 u8 _reserved4[0x20-0xc];
56 /* offset: 0x20 */
57 u16 dciversion; /* BCD encoding of device version */
58 u8 _reserved5[0x24-0x22];
59 u32 dccparams; /* overall device controller capability */
60#define HOSTCAP BIT(8) /* host capable */
61#define DEVCAP BIT(7) /* device capable */
62#define DEN(d) \
63 (((d)>>0)&0x1f) /* bits 4:0, device endpoint number */
64} __attribute__ ((packed));
65
66
67/* Operational Registers, BAR0 + OP_REG_OFFSET */
68struct langwell_op_regs {
69 /* offset: 0x28 */
70 u32 extsts;
71#define EXTS_TI1 BIT(4) /* general purpose timer interrupt 1 */
72#define EXTS_TI1TI0 BIT(3) /* general purpose timer interrupt 0 */
73#define EXTS_TI1UPI BIT(2) /* USB host periodic interrupt */
74#define EXTS_TI1UAI BIT(1) /* USB host asynchronous interrupt */
75#define EXTS_TI1NAKI BIT(0) /* NAK interrupt */
76 u32 extintr;
77#define EXTI_TIE1 BIT(4) /* general purpose timer interrupt enable 1 */
78#define EXTI_TIE0 BIT(3) /* general purpose timer interrupt enable 0 */
79#define EXTI_UPIE BIT(2) /* USB host periodic interrupt enable */
80#define EXTI_UAIE BIT(1) /* USB host asynchronous interrupt enable */
81#define EXTI_NAKE BIT(0) /* NAK interrupt enable */
82 /* offset: 0x30 */
83 u32 usbcmd;
84#define CMD_HIRD(u) \
85 (((u)>>24)&0xf) /* bits 27:24, host init resume duration */
86#define CMD_ITC(u) \
87 (((u)>>16)&0xff) /* bits 23:16, interrupt threshold control */
88#define CMD_PPE BIT(15) /* per-port change events enable */
89#define CMD_ATDTW BIT(14) /* add dTD tripwire */
90#define CMD_SUTW BIT(13) /* setup tripwire */
91#define CMD_ASPE BIT(11) /* asynchronous schedule park mode enable */
92#define CMD_FS2 BIT(10) /* frame list size */
93#define CMD_ASP1 BIT(9) /* asynchronous schedule park mode count */
94#define CMD_ASP0 BIT(8)
95#define CMD_LR BIT(7) /* light host/device controller reset */
96#define CMD_IAA BIT(6) /* interrupt on async advance doorbell */
97#define CMD_ASE BIT(5) /* asynchronous schedule enable */
98#define CMD_PSE BIT(4) /* periodic schedule enable */
99#define CMD_FS1 BIT(3)
100#define CMD_FS0 BIT(2)
101#define CMD_RST BIT(1) /* controller reset */
102#define CMD_RUNSTOP BIT(0) /* run/stop */
103 u32 usbsts;
104#define STS_PPCI(u) \
105 (((u)>>16)&0xffff) /* bits 31:16, port-n change detect */
106#define STS_AS BIT(15) /* asynchronous schedule status */
107#define STS_PS BIT(14) /* periodic schedule status */
108#define STS_RCL BIT(13) /* reclamation */
109#define STS_HCH BIT(12) /* HC halted */
110#define STS_ULPII BIT(10) /* ULPI interrupt */
111#define STS_SLI BIT(8) /* DC suspend */
112#define STS_SRI BIT(7) /* SOF received */
113#define STS_URI BIT(6) /* USB reset received */
114#define STS_AAI BIT(5) /* interrupt on async advance */
115#define STS_SEI BIT(4) /* system error */
116#define STS_FRI BIT(3) /* frame list rollover */
117#define STS_PCI BIT(2) /* port change detect */
118#define STS_UEI BIT(1) /* USB error interrupt */
119#define STS_UI BIT(0) /* USB interrupt */
120 u32 usbintr;
121/* bits 31:16, per-port interrupt enable */
122#define INTR_PPCE(u) (((u)>>16)&0xffff)
123#define INTR_ULPIE BIT(10) /* ULPI enable */
124#define INTR_SLE BIT(8) /* DC sleep/suspend enable */
125#define INTR_SRE BIT(7) /* SOF received enable */
126#define INTR_URE BIT(6) /* USB reset enable */
127#define INTR_AAE BIT(5) /* interrupt on async advance enable */
128#define INTR_SEE BIT(4) /* system error enable */
129#define INTR_FRE BIT(3) /* frame list rollover enable */
130#define INTR_PCE BIT(2) /* port change detect enable */
131#define INTR_UEE BIT(1) /* USB error interrupt enable */
132#define INTR_UE BIT(0) /* USB interrupt enable */
133 u32 frindex; /* frame index */
134#define FRINDEX_MASK (0x3fff << 0)
135 u32 ctrldssegment; /* not used */
136 u32 deviceaddr;
137#define USBADR_SHIFT 25
138#define USBADR(d) \
139 (((d)>>25)&0x7f) /* bits 31:25, device address */
140#define USBADR_MASK (0x7f << 25)
141#define USBADRA BIT(24) /* device address advance */
142 u32 endpointlistaddr;/* endpoint list top memory address */
143/* bits 31:11, endpoint list pointer */
144#define EPBASE(d) (((d)>>11)&0x1fffff)
145#define ENDPOINTLISTADDR_MASK (0x1fffff << 11)
146 u32 ttctrl; /* H: TT operatin, not used */
147 /* offset: 0x50 */
148 u32 burstsize; /* burst size of data movement */
149#define TXPBURST(b) \
150 (((b)>>8)&0xff) /* bits 15:8, TX burst length */
151#define RXPBURST(b) \
152 (((b)>>0)&0xff) /* bits 7:0, RX burst length */
153 u32 txfilltuning; /* TX tuning */
154 u32 txttfilltuning; /* H: TX TT tuning */
155 u32 ic_usb; /* control the IC_USB FS/LS transceiver */
156 /* offset: 0x60 */
157 u32 ulpi_viewport; /* indirect access to ULPI PHY */
158#define ULPIWU BIT(31) /* ULPI wakeup */
159#define ULPIRUN BIT(30) /* ULPI read/write run */
160#define ULPIRW BIT(29) /* ULPI read/write control */
161#define ULPISS BIT(27) /* ULPI sync state */
162#define ULPIPORT(u) \
163 (((u)>>24)&7) /* bits 26:24, ULPI port number */
164#define ULPIADDR(u) \
165 (((u)>>16)&0xff) /* bits 23:16, ULPI data address */
166#define ULPIDATRD(u) \
167 (((u)>>8)&0xff) /* bits 15:8, ULPI data read */
168#define ULPIDATWR(u) \
169 (((u)>>0)&0xff) /* bits 7:0, ULPI date write */
170 u8 _reserved6[0x70-0x64];
171 /* offset: 0x70 */
172 u32 configflag; /* H: not used */
173 u32 portsc1; /* port status */
174#define DA(p) \
175 (((p)>>25)&0x7f) /* bits 31:25, device address */
176#define PORTS_SSTS (BIT(24) | BIT(23)) /* suspend status */
177#define PORTS_WKOC BIT(22) /* wake on over-current enable */
178#define PORTS_WKDS BIT(21) /* wake on disconnect enable */
179#define PORTS_WKCN BIT(20) /* wake on connect enable */
180#define PORTS_PTC(p) (((p)>>16)&0xf) /* bits 19:16, port test control */
181#define PORTS_PIC (BIT(15) | BIT(14)) /* port indicator control */
182#define PORTS_PO BIT(13) /* port owner */
183#define PORTS_PP BIT(12) /* port power */
184#define PORTS_LS (BIT(11) | BIT(10)) /* line status */
185#define PORTS_SLP BIT(9) /* suspend using L1 */
186#define PORTS_PR BIT(8) /* port reset */
187#define PORTS_SUSP BIT(7) /* suspend */
188#define PORTS_FPR BIT(6) /* force port resume */
189#define PORTS_OCC BIT(5) /* over-current change */
190#define PORTS_OCA BIT(4) /* over-current active */
191#define PORTS_PEC BIT(3) /* port enable/disable change */
192#define PORTS_PE BIT(2) /* port enable/disable */
193#define PORTS_CSC BIT(1) /* connect status change */
194#define PORTS_CCS BIT(0) /* current connect status */
195 u8 _reserved7[0xb4-0x78];
196 /* offset: 0xb4 */
197 u32 devlc; /* control LPM and each USB port behavior */
198/* bits 31:29, parallel transceiver select */
199#define LPM_PTS(d) (((d)>>29)&7)
200#define LPM_STS BIT(28) /* serial transceiver select */
201#define LPM_PTW BIT(27) /* parallel transceiver width */
202#define LPM_PSPD(d) (((d)>>25)&3) /* bits 26:25, port speed */
203#define LPM_PSPD_MASK (BIT(26) | BIT(25))
204#define LPM_SPEED_FULL 0
205#define LPM_SPEED_LOW 1
206#define LPM_SPEED_HIGH 2
207#define LPM_SRT BIT(24) /* shorten reset time */
208#define LPM_PFSC BIT(23) /* port force full speed connect */
209#define LPM_PHCD BIT(22) /* PHY low power suspend clock disable */
210#define LPM_STL BIT(16) /* STALL reply to LPM token */
211#define LPM_BA(d) \
212 (((d)>>1)&0x7ff) /* bits 11:1, BmAttributes */
213#define LPM_NYT_ACK BIT(0) /* NYET/ACK reply to LPM token */
214 u8 _reserved8[0xf4-0xb8];
215 /* offset: 0xf4 */
216 u32 otgsc; /* On-The-Go status and control */
217#define OTGSC_DPIE BIT(30) /* data pulse interrupt enable */
218#define OTGSC_MSE BIT(29) /* 1 ms timer interrupt enable */
219#define OTGSC_BSEIE BIT(28) /* B session end interrupt enable */
220#define OTGSC_BSVIE BIT(27) /* B session valid interrupt enable */
221#define OTGSC_ASVIE BIT(26) /* A session valid interrupt enable */
222#define OTGSC_AVVIE BIT(25) /* A VBUS valid interrupt enable */
223#define OTGSC_IDIE BIT(24) /* USB ID interrupt enable */
224#define OTGSC_DPIS BIT(22) /* data pulse interrupt status */
225#define OTGSC_MSS BIT(21) /* 1 ms timer interrupt status */
226#define OTGSC_BSEIS BIT(20) /* B session end interrupt status */
227#define OTGSC_BSVIS BIT(19) /* B session valid interrupt status */
228#define OTGSC_ASVIS BIT(18) /* A session valid interrupt status */
229#define OTGSC_AVVIS BIT(17) /* A VBUS valid interrupt status */
230#define OTGSC_IDIS BIT(16) /* USB ID interrupt status */
231#define OTGSC_DPS BIT(14) /* data bus pulsing status */
232#define OTGSC_MST BIT(13) /* 1 ms timer toggle */
233#define OTGSC_BSE BIT(12) /* B session end */
234#define OTGSC_BSV BIT(11) /* B session valid */
235#define OTGSC_ASV BIT(10) /* A session valid */
236#define OTGSC_AVV BIT(9) /* A VBUS valid */
237#define OTGSC_USBID BIT(8) /* USB ID */
238#define OTGSC_HABA BIT(7) /* hw assist B-disconnect to A-connect */
239#define OTGSC_HADP BIT(6) /* hw assist data pulse */
240#define OTGSC_IDPU BIT(5) /* ID pullup */
241#define OTGSC_DP BIT(4) /* data pulsing */
242#define OTGSC_OT BIT(3) /* OTG termination */
243#define OTGSC_HAAR BIT(2) /* hw assist auto reset */
244#define OTGSC_VC BIT(1) /* VBUS charge */
245#define OTGSC_VD BIT(0) /* VBUS discharge */
246 u32 usbmode;
247#define MODE_VBPS BIT(5) /* R/W VBUS power select */
248#define MODE_SDIS BIT(4) /* R/W stream disable mode */
249#define MODE_SLOM BIT(3) /* R/W setup lockout mode */
250#define MODE_ENSE BIT(2) /* endian select */
251#define MODE_CM(u) (((u)>>0)&3) /* bits 1:0, controller mode */
252#define MODE_IDLE 0
253#define MODE_DEVICE 2
254#define MODE_HOST 3
255 u8 _reserved9[0x100-0xfc];
256 /* offset: 0x100 */
257 u32 endptnak;
258#define EPTN(e) \
259 (((e)>>16)&0xffff) /* bits 31:16, TX endpoint NAK */
260#define EPRN(e) \
261 (((e)>>0)&0xffff) /* bits 15:0, RX endpoint NAK */
262 u32 endptnaken;
263#define EPTNE(e) \
264 (((e)>>16)&0xffff) /* bits 31:16, TX endpoint NAK enable */
265#define EPRNE(e) \
266 (((e)>>0)&0xffff) /* bits 15:0, RX endpoint NAK enable */
267 u32 endptsetupstat;
268#define SETUPSTAT_MASK (0xffff << 0) /* bits 15:0 */
269#define EP0SETUPSTAT_MASK 1
270 u32 endptprime;
271/* bits 31:16, prime endpoint transmit buffer */
272#define PETB(e) (((e)>>16)&0xffff)
273/* bits 15:0, prime endpoint receive buffer */
274#define PERB(e) (((e)>>0)&0xffff)
275 /* offset: 0x110 */
276 u32 endptflush;
277/* bits 31:16, flush endpoint transmit buffer */
278#define FETB(e) (((e)>>16)&0xffff)
279/* bits 15:0, flush endpoint receive buffer */
280#define FERB(e) (((e)>>0)&0xffff)
281 u32 endptstat;
282/* bits 31:16, endpoint transmit buffer ready */
283#define ETBR(e) (((e)>>16)&0xffff)
284/* bits 15:0, endpoint receive buffer ready */
285#define ERBR(e) (((e)>>0)&0xffff)
286 u32 endptcomplete;
287/* bits 31:16, endpoint transmit complete event */
288#define ETCE(e) (((e)>>16)&0xffff)
289/* bits 15:0, endpoint receive complete event */
290#define ERCE(e) (((e)>>0)&0xffff)
291 /* offset: 0x11c */
292 u32 endptctrl[16];
293#define EPCTRL_TXE BIT(23) /* TX endpoint enable */
294#define EPCTRL_TXR BIT(22) /* TX data toggle reset */
295#define EPCTRL_TXI BIT(21) /* TX data toggle inhibit */
296#define EPCTRL_TXT(e) (((e)>>18)&3) /* bits 19:18, TX endpoint type */
297#define EPCTRL_TXT_SHIFT 18
298#define EPCTRL_TXD BIT(17) /* TX endpoint data source */
299#define EPCTRL_TXS BIT(16) /* TX endpoint STALL */
300#define EPCTRL_RXE BIT(7) /* RX endpoint enable */
301#define EPCTRL_RXR BIT(6) /* RX data toggle reset */
302#define EPCTRL_RXI BIT(5) /* RX data toggle inhibit */
303#define EPCTRL_RXT(e) (((e)>>2)&3) /* bits 3:2, RX endpoint type */
304#define EPCTRL_RXT_SHIFT 2 /* bits 19:18, TX endpoint type */
305#define EPCTRL_RXD BIT(1) /* RX endpoint data sink */
306#define EPCTRL_RXS BIT(0) /* RX endpoint STALL */
307} __attribute__ ((packed));
308
309#endif /* __LANGWELL_UDC_H */
310
diff --git a/include/linux/usb/rndis_host.h b/include/linux/usb/rndis_host.h
index 88fceb718c77..d44ef85db177 100644
--- a/include/linux/usb/rndis_host.h
+++ b/include/linux/usb/rndis_host.h
@@ -20,6 +20,8 @@
20#ifndef __LINUX_USB_RNDIS_HOST_H 20#ifndef __LINUX_USB_RNDIS_HOST_H
21#define __LINUX_USB_RNDIS_HOST_H 21#define __LINUX_USB_RNDIS_HOST_H
22 22
23#include <linux/rndis.h>
24
23/* 25/*
24 * CONTROL uses CDC "encapsulated commands" with funky notifications. 26 * CONTROL uses CDC "encapsulated commands" with funky notifications.
25 * - control-out: SEND_ENCAPSULATED 27 * - control-out: SEND_ENCAPSULATED
@@ -49,47 +51,6 @@ struct rndis_msg_hdr {
49 */ 51 */
50#define RNDIS_CONTROL_TIMEOUT_MS (5 * 1000) 52#define RNDIS_CONTROL_TIMEOUT_MS (5 * 1000)
51 53
52#define RNDIS_MSG_COMPLETION cpu_to_le32(0x80000000)
53
54/* codes for "msg_type" field of rndis messages;
55 * only the data channel uses packet messages (maybe batched);
56 * everything else goes on the control channel.
57 */
58#define RNDIS_MSG_PACKET cpu_to_le32(0x00000001) /* 1-N packets */
59#define RNDIS_MSG_INIT cpu_to_le32(0x00000002)
60#define RNDIS_MSG_INIT_C (RNDIS_MSG_INIT|RNDIS_MSG_COMPLETION)
61#define RNDIS_MSG_HALT cpu_to_le32(0x00000003)
62#define RNDIS_MSG_QUERY cpu_to_le32(0x00000004)
63#define RNDIS_MSG_QUERY_C (RNDIS_MSG_QUERY|RNDIS_MSG_COMPLETION)
64#define RNDIS_MSG_SET cpu_to_le32(0x00000005)
65#define RNDIS_MSG_SET_C (RNDIS_MSG_SET|RNDIS_MSG_COMPLETION)
66#define RNDIS_MSG_RESET cpu_to_le32(0x00000006)
67#define RNDIS_MSG_RESET_C (RNDIS_MSG_RESET|RNDIS_MSG_COMPLETION)
68#define RNDIS_MSG_INDICATE cpu_to_le32(0x00000007)
69#define RNDIS_MSG_KEEPALIVE cpu_to_le32(0x00000008)
70#define RNDIS_MSG_KEEPALIVE_C (RNDIS_MSG_KEEPALIVE|RNDIS_MSG_COMPLETION)
71
72/* codes for "status" field of completion messages */
73#define RNDIS_STATUS_SUCCESS cpu_to_le32(0x00000000)
74#define RNDIS_STATUS_FAILURE cpu_to_le32(0xc0000001)
75#define RNDIS_STATUS_INVALID_DATA cpu_to_le32(0xc0010015)
76#define RNDIS_STATUS_NOT_SUPPORTED cpu_to_le32(0xc00000bb)
77#define RNDIS_STATUS_MEDIA_CONNECT cpu_to_le32(0x4001000b)
78#define RNDIS_STATUS_MEDIA_DISCONNECT cpu_to_le32(0x4001000c)
79#define RNDIS_STATUS_MEDIA_SPECIFIC_INDICATION cpu_to_le32(0x40010012)
80
81/* codes for OID_GEN_PHYSICAL_MEDIUM */
82#define RNDIS_PHYSICAL_MEDIUM_UNSPECIFIED cpu_to_le32(0x00000000)
83#define RNDIS_PHYSICAL_MEDIUM_WIRELESS_LAN cpu_to_le32(0x00000001)
84#define RNDIS_PHYSICAL_MEDIUM_CABLE_MODEM cpu_to_le32(0x00000002)
85#define RNDIS_PHYSICAL_MEDIUM_PHONE_LINE cpu_to_le32(0x00000003)
86#define RNDIS_PHYSICAL_MEDIUM_POWER_LINE cpu_to_le32(0x00000004)
87#define RNDIS_PHYSICAL_MEDIUM_DSL cpu_to_le32(0x00000005)
88#define RNDIS_PHYSICAL_MEDIUM_FIBRE_CHANNEL cpu_to_le32(0x00000006)
89#define RNDIS_PHYSICAL_MEDIUM_1394 cpu_to_le32(0x00000007)
90#define RNDIS_PHYSICAL_MEDIUM_WIRELESS_WAN cpu_to_le32(0x00000008)
91#define RNDIS_PHYSICAL_MEDIUM_MAX cpu_to_le32(0x00000009)
92
93struct rndis_data_hdr { 54struct rndis_data_hdr {
94 __le32 msg_type; /* RNDIS_MSG_PACKET */ 55 __le32 msg_type; /* RNDIS_MSG_PACKET */
95 __le32 msg_len; /* rndis_data_hdr + data_len + pad */ 56 __le32 msg_len; /* rndis_data_hdr + data_len + pad */
@@ -222,29 +183,6 @@ struct rndis_keepalive_c { /* IN (optionally OUT) */
222 __le32 status; 183 __le32 status;
223} __attribute__ ((packed)); 184} __attribute__ ((packed));
224 185
225/* NOTE: about 30 OIDs are "mandatory" for peripherals to support ... and
226 * there are gobs more that may optionally be supported. We'll avoid as much
227 * of that mess as possible.
228 */
229#define OID_802_3_PERMANENT_ADDRESS cpu_to_le32(0x01010101)
230#define OID_GEN_MAXIMUM_FRAME_SIZE cpu_to_le32(0x00010106)
231#define OID_GEN_CURRENT_PACKET_FILTER cpu_to_le32(0x0001010e)
232#define OID_GEN_PHYSICAL_MEDIUM cpu_to_le32(0x00010202)
233
234/* packet filter bits used by OID_GEN_CURRENT_PACKET_FILTER */
235#define RNDIS_PACKET_TYPE_DIRECTED cpu_to_le32(0x00000001)
236#define RNDIS_PACKET_TYPE_MULTICAST cpu_to_le32(0x00000002)
237#define RNDIS_PACKET_TYPE_ALL_MULTICAST cpu_to_le32(0x00000004)
238#define RNDIS_PACKET_TYPE_BROADCAST cpu_to_le32(0x00000008)
239#define RNDIS_PACKET_TYPE_SOURCE_ROUTING cpu_to_le32(0x00000010)
240#define RNDIS_PACKET_TYPE_PROMISCUOUS cpu_to_le32(0x00000020)
241#define RNDIS_PACKET_TYPE_SMT cpu_to_le32(0x00000040)
242#define RNDIS_PACKET_TYPE_ALL_LOCAL cpu_to_le32(0x00000080)
243#define RNDIS_PACKET_TYPE_GROUP cpu_to_le32(0x00001000)
244#define RNDIS_PACKET_TYPE_ALL_FUNCTIONAL cpu_to_le32(0x00002000)
245#define RNDIS_PACKET_TYPE_FUNCTIONAL cpu_to_le32(0x00004000)
246#define RNDIS_PACKET_TYPE_MAC_FRAME cpu_to_le32(0x00008000)
247
248/* default filter used with RNDIS devices */ 186/* default filter used with RNDIS devices */
249#define RNDIS_DEFAULT_FILTER ( \ 187#define RNDIS_DEFAULT_FILTER ( \
250 RNDIS_PACKET_TYPE_DIRECTED | \ 188 RNDIS_PACKET_TYPE_DIRECTED | \
diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h
index 474283888233..86c0b451745d 100644
--- a/include/linux/usb/serial.h
+++ b/include/linux/usb/serial.h
@@ -1,7 +1,7 @@
1/* 1/*
2 * USB Serial Converter stuff 2 * USB Serial Converter stuff
3 * 3 *
4 * Copyright (C) 1999 - 2005 4 * Copyright (C) 1999 - 2012
5 * Greg Kroah-Hartman (greg@kroah.com) 5 * Greg Kroah-Hartman (greg@kroah.com)
6 * 6 *
7 * This program is free software; you can redistribute it and/or modify 7 * This program is free software; you can redistribute it and/or modify
@@ -249,6 +249,7 @@ struct usb_serial_driver {
249 249
250 int (*suspend)(struct usb_serial *serial, pm_message_t message); 250 int (*suspend)(struct usb_serial *serial, pm_message_t message);
251 int (*resume)(struct usb_serial *serial); 251 int (*resume)(struct usb_serial *serial);
252 int (*reset_resume)(struct usb_serial *serial);
252 253
253 /* serial function calls */ 254 /* serial function calls */
254 /* Called by console and by the tty layer */ 255 /* Called by console and by the tty layer */
@@ -292,16 +293,11 @@ struct usb_serial_driver {
292#define to_usb_serial_driver(d) \ 293#define to_usb_serial_driver(d) \
293 container_of(d, struct usb_serial_driver, driver) 294 container_of(d, struct usb_serial_driver, driver)
294 295
295extern int usb_serial_register_drivers(struct usb_driver *udriver, 296extern int usb_serial_register_drivers(struct usb_serial_driver *const serial_drivers[],
296 struct usb_serial_driver * const serial_drivers[]); 297 const char *name, const struct usb_device_id *id_table);
297extern void usb_serial_deregister_drivers(struct usb_driver *udriver, 298extern void usb_serial_deregister_drivers(struct usb_serial_driver *const serial_drivers[]);
298 struct usb_serial_driver * const serial_drivers[]);
299extern void usb_serial_port_softint(struct usb_serial_port *port); 299extern void usb_serial_port_softint(struct usb_serial_port *port);
300 300
301extern int usb_serial_probe(struct usb_interface *iface,
302 const struct usb_device_id *id);
303extern void usb_serial_disconnect(struct usb_interface *iface);
304
305extern int usb_serial_suspend(struct usb_interface *intf, pm_message_t message); 301extern int usb_serial_suspend(struct usb_interface *intf, pm_message_t message);
306extern int usb_serial_resume(struct usb_interface *intf); 302extern int usb_serial_resume(struct usb_interface *intf);
307 303
@@ -400,8 +396,8 @@ do { \
400 396
401/* 397/*
402 * module_usb_serial_driver() - Helper macro for registering a USB Serial driver 398 * module_usb_serial_driver() - Helper macro for registering a USB Serial driver
403 * @__usb_driver: usb_driver struct to register
404 * @__serial_drivers: list of usb_serial drivers to register 399 * @__serial_drivers: list of usb_serial drivers to register
400 * @__ids: all device ids that @__serial_drivers bind to
405 * 401 *
406 * Helper macro for USB serial drivers which do not do anything special 402 * Helper macro for USB serial drivers which do not do anything special
407 * in module init/exit. This eliminates a lot of boilerplate. Each 403 * in module init/exit. This eliminates a lot of boilerplate. Each
@@ -409,9 +405,21 @@ do { \
409 * module_init() and module_exit() 405 * module_init() and module_exit()
410 * 406 *
411 */ 407 */
412#define module_usb_serial_driver(__usb_driver, __serial_drivers) \ 408#define usb_serial_module_driver(__name, __serial_drivers, __ids) \
413 module_driver(__usb_driver, usb_serial_register_drivers, \ 409static int __init usb_serial_module_init(void) \
414 usb_serial_deregister_drivers, __serial_drivers) 410{ \
411 return usb_serial_register_drivers(__serial_drivers, \
412 __name, __ids); \
413} \
414module_init(usb_serial_module_init); \
415static void __exit usb_serial_module_exit(void) \
416{ \
417 usb_serial_deregister_drivers(__serial_drivers); \
418} \
419module_exit(usb_serial_module_exit);
420
421#define module_usb_serial_driver(__serial_drivers, __ids) \
422 usb_serial_module_driver(KBUILD_MODNAME, __serial_drivers, __ids)
415 423
416#endif /* __LINUX_USB_SERIAL_H */ 424#endif /* __LINUX_USB_SERIAL_H */
417 425
generated by cgit v1.2.2 (git 2.25.0) at 2026-04-14 16:36:06 -0400