17 files changed, 69 insertions, 61 deletions

diff --git a/include/linux/usb/audio.h b/include/linux/usb/audio.h
index 2dfeef16b221..8cb025fef634 100644
--- a/include/linux/usb/audio.h
+++ b/include/linux/usb/audio.h
@@ -50,4 +50,4 @@ struct usb_ac_header_descriptor_##n {				\
         __u8  baInterfaceNr[n];                                 \
 } __attribute__ ((packed))
 
-#endif
+#endif /* __LINUX_USB_AUDIO_H */
diff --git a/include/linux/usb/cdc.h b/include/linux/usb/cdc.h
index 94ee4ecf0564..71e52f2f6a38 100644
--- a/include/linux/usb/cdc.h
+++ b/include/linux/usb/cdc.h
@@ -6,6 +6,9 @@
  * firmware based USB peripherals.
  */
 
+#ifndef __LINUX_USB_CDC_H
+#define __LINUX_USB_CDC_H
+
 #define USB_CDC_SUBCLASS_ACM                    0x02
 #define USB_CDC_SUBCLASS_ETHERNET               0x06
 #define USB_CDC_SUBCLASS_WHCM                   0x08
@@ -221,3 +224,4 @@ struct usb_cdc_notification {
         __le16  wLength;
 } __attribute__ ((packed));
 
+#endif /* __LINUX_USB_CDC_H */
diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h
index 6169438ec5a2..7e0d3084f76c 100644
--- a/include/linux/usb/ch9.h
+++ b/include/linux/usb/ch9.h
@@ -66,8 +66,8 @@
 #define USB_RECIP_ENDPOINT              0x02
 #define USB_RECIP_OTHER                 0x03
 /* From Wireless USB 1.0 */
-#define USB_RECIP_PORT                  0x04
-#define USB_RECIP_RPIPE                 0x05
+#define USB_RECIP_PORT                  0x04
+#define USB_RECIP_RPIPE         0x05
 
 /*
  * Standard requests, for the bRequest field of a SETUP packet.
@@ -102,10 +102,16 @@
 #define USB_REQ_LOOPBACK_DATA_READ      0x16
 #define USB_REQ_SET_INTERFACE_DS        0x17
 
+/* The Link Power Mangement (LPM) ECN defines USB_REQ_TEST_AND_SET command,
+ * used by hubs to put ports into a new L1 suspend state, except that it
+ * forgot to define its number ...
+ */
+
 /*
  * USB feature flags are written using USB_REQ_{CLEAR,SET}_FEATURE, and
  * are read as a bit array returned by USB_REQ_GET_STATUS.  (So there
- * are at most sixteen features of each type.)
+ * are at most sixteen features of each type.)  Hubs may also support a
+ * new USB_REQ_TEST_AND_SET_FEATURE to put ports into L1 suspend.
  */
 #define USB_DEVICE_SELF_POWERED         0       /* (read only) */
 #define USB_DEVICE_REMOTE_WAKEUP        1       /* dev may initiate wakeup */
@@ -180,6 +186,7 @@ struct usb_ctrlrequest {
 #define USB_DT_WIRELESS_ENDPOINT_COMP   0x11
 #define USB_DT_WIRE_ADAPTER             0x21
 #define USB_DT_RPIPE                    0x22
+#define USB_DT_CS_RADIO_CONTROL         0x23
 
 /* Conventional codes for class-specific descriptors.  The convention is
  * defined in the USB "Common Class" Spec (3.11).  Individual class specs
@@ -574,7 +581,9 @@ enum usb_device_state {
         /* NOTE:  there are actually four different SUSPENDED
          * states, returning to POWERED, DEFAULT, ADDRESS, or
          * CONFIGURED respectively when SOF tokens flow again.
+         * At this level there's no difference between L1 and L2
+         * suspend states.  (L2 being original USB 1.1 suspend.)
          */
 };
 
-#endif  /* __LINUX_USB_CH9_H */
+#endif /* __LINUX_USB_CH9_H */
diff --git a/include/linux/usb/g_printer.h b/include/linux/usb/g_printer.h
index 0c5ea1e3eb98..6178fde50f74 100644
--- a/include/linux/usb/g_printer.h
+++ b/include/linux/usb/g_printer.h
@@ -18,6 +18,8 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
+#ifndef __LINUX_USB_G_PRINTER_H
+#define __LINUX_USB_G_PRINTER_H
 
 #define PRINTER_NOT_ERROR       0x08
 #define PRINTER_SELECTED        0x10
@@ -29,3 +31,5 @@
  */
 #define GADGET_GET_PRINTER_STATUS       _IOR('g', 0x21, unsigned char)
 #define GADGET_SET_PRINTER_STATUS       _IOWR('g', 0x22, unsigned char)
+
+#endif /* __LINUX_USB_G_PRINTER_H */
diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
index f3295296b435..d8128f7102c9 100644
--- a/include/linux/usb/gadget.h
+++ b/include/linux/usb/gadget.h
@@ -846,4 +846,4 @@ extern struct usb_ep *usb_ep_autoconfig(struct usb_gadget *,
 
 extern void usb_ep_autoconfig_reset(struct usb_gadget *) __devinit;
 
-#endif  /* __LINUX_USB_GADGET_H */
+#endif /* __LINUX_USB_GADGET_H */
diff --git a/include/linux/usb/gadgetfs.h b/include/linux/usb/gadgetfs.h
index c291ab1af747..ea45f265ec05 100644
--- a/include/linux/usb/gadgetfs.h
+++ b/include/linux/usb/gadgetfs.h
@@ -1,11 +1,3 @@
-#ifndef __LINUX_USB_GADGETFS_H
-#define __LINUX_USB_GADGETFS_H
-
-#include <asm/types.h>
-#include <asm/ioctl.h>
-
-#include <linux/usb/ch9.h>
-
 /*
  * Filesystem based user-mode API to USB Gadget controller hardware
  *
@@ -23,6 +15,14 @@
  * then performing data transfers by reading or writing.
  */
 
+#ifndef __LINUX_USB_GADGETFS_H
+#define __LINUX_USB_GADGETFS_H
+
+#include <asm/types.h>
+#include <asm/ioctl.h>
+
+#include <linux/usb/ch9.h>
+
 /*
  * Events are delivered on the ep0 file descriptor, when the user mode driver
  * reads from this file descriptor after writing the descriptors.  Don't
diff --git a/include/linux/usb/input.h b/include/linux/usb/input.h
index 716e0cc16043..0e010b220e85 100644
--- a/include/linux/usb/input.h
+++ b/include/linux/usb/input.h
@@ -1,6 +1,3 @@
-#ifndef __USB_INPUT_H
-#define __USB_INPUT_H
-
 /*
  * Copyright (C) 2005 Dmitry Torokhov
  *
@@ -9,6 +6,9 @@
  * the Free Software Foundation.
  */
 
+#ifndef __LINUX_USB_INPUT_H
+#define __LINUX_USB_INPUT_H
+
 #include <linux/usb.h>
 #include <linux/input.h>
 #include <asm/byteorder.h>
@@ -22,4 +22,4 @@ usb_to_input_id(const struct usb_device *dev, struct input_id *id)
         id->version = le16_to_cpu(dev->descriptor.bcdDevice);
 }
 
-#endif
+#endif /* __LINUX_USB_INPUT_H */
diff --git a/include/linux/usb/iowarrior.h b/include/linux/usb/iowarrior.h
index de6f380e17a2..4fd6513d564c 100644
--- a/include/linux/usb/iowarrior.h
+++ b/include/linux/usb/iowarrior.h
@@ -1,5 +1,5 @@
-#ifndef _IOWARRIOR_H_
-#define _IOWARRIOR_H_
+#ifndef __LINUX_USB_IOWARRIOR_H
+#define __LINUX_USB_IOWARRIOR_H
 
 #define CODEMERCS_MAGIC_NUMBER  0xC0    /* like COde Mercenaries */
 
@@ -39,4 +39,4 @@ struct iowarrior_info {
 */
 #define IOW_GETINFO _IOR(CODEMERCS_MAGIC_NUMBER, 3, struct iowarrior_info)
 
-#endif  /* _IOWARRIOR_H_ */
+#endif /* __LINUX_USB_IOWARRIOR_H */
diff --git a/include/linux/usb/isp116x.h b/include/linux/usb/isp116x.h
index 67d2826f34fe..96ca114e88d0 100644
--- a/include/linux/usb/isp116x.h
+++ b/include/linux/usb/isp116x.h
@@ -1,9 +1,11 @@
-
 /*
  * Board initialization code should put one of these into dev->platform_data
  * and place the isp116x onto platform_bus.
  */
 
+#ifndef __LINUX_USB_ISP116X_H
+#define __LINUX_USB_ISP116X_H
+
 struct isp116x_platform_data {
         /* Enable internal resistors on downstream ports */
         unsigned sel15Kres:1;
@@ -27,3 +29,5 @@ struct isp116x_platform_data {
          */
         void (*delay) (struct device *dev, int delay);
 };
+
+#endif /* __LINUX_USB_ISP116X_H */
diff --git a/include/linux/usb/midi.h b/include/linux/usb/midi.h
index 80624c562921..1d1040865661 100644
--- a/include/linux/usb/midi.h
+++ b/include/linux/usb/midi.h
@@ -109,4 +109,4 @@ struct usb_ms_endpoint_descriptor_##n {				\
         __u8  baAssocJackID[n];                                 \
 } __attribute__ ((packed))
 
-#endif
+#endif /* __LINUX_USB_MIDI_H */
diff --git a/include/linux/usb/net2280.h b/include/linux/usb/net2280.h
index ec897cb844ab..96ca549a778d 100644
--- a/include/linux/usb/net2280.h
+++ b/include/linux/usb/net2280.h
@@ -1,11 +1,7 @@
 /*
  * NetChip 2280 high/full speed USB device controller.
  * Unlike many such controllers, this one talks PCI.
- */
-#ifndef __LINUX_USB_NET2280_H
-#define __LINUX_USB_NET2280_H
-
-/*
+ *
  * Copyright (C) 2002 NetChip Technology, Inc. (http://www.netchip.com)
  * Copyright (C) 2003 David Brownell
  *
@@ -24,6 +20,9 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
+#ifndef __LINUX_USB_NET2280_H
+#define __LINUX_USB_NET2280_H
+
 /*-------------------------------------------------------------------------*/
 
 /* NET2280 MEMORY MAPPED REGISTERS
diff --git a/include/linux/usb/otg.h b/include/linux/usb/otg.h
index e007074ebe41..1db25d152ad8 100644
--- a/include/linux/usb/otg.h
+++ b/include/linux/usb/otg.h
@@ -1,11 +1,13 @@
 /* USB OTG (On The Go) defines */
-
 /*
+ *
  * These APIs may be used between USB controllers.  USB device drivers
  * (for either host or peripheral roles) don't use these calls; they
  * continue to use just usb_device and usb_gadget.
  */
 
+#ifndef __LINUX_USB_OTG_H
+#define __LINUX_USB_OTG_H
 
 /* OTG defines lots of enumeration states before device reset */
 enum usb_otg_state {
@@ -129,3 +131,5 @@ otg_start_srp(struct otg_transceiver *otg)
 
 /* for OTG controller drivers (and maybe other stuff) */
 extern int usb_bus_start_enum(struct usb_bus *bus, unsigned port_num);
+
+#endif /* __LINUX_USB_OTG_H */
diff --git a/include/linux/usb/quirks.h b/include/linux/usb/quirks.h
index 1f999ec8d08c..7f6c603db654 100644
--- a/include/linux/usb/quirks.h
+++ b/include/linux/usb/quirks.h
@@ -4,6 +4,9 @@
  * belong here.
  */
 
+#ifndef __LINUX_USB_QUIRKS_H
+#define __LINUX_USB_QUIRKS_H
+
 /* string descriptors must not be fetched using a 255-byte read */
 #define USB_QUIRK_STRING_FETCH_255      0x00000001
 
@@ -12,3 +15,5 @@
 
 /* device can't handle Set-Interface requests */
 #define USB_QUIRK_NO_SET_INTF           0x00000004
+
+#endif /* __LINUX_USB_QUIRKS_H */
diff --git a/include/linux/usb/rndis_host.h b/include/linux/usb/rndis_host.h
index edc1d4a0e272..29d6458ecb8d 100644
--- a/include/linux/usb/rndis_host.h
+++ b/include/linux/usb/rndis_host.h
@@ -17,10 +17,8 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
-
-#ifndef __RNDIS_HOST_H
-#define __RNDIS_HOST_H
-
+#ifndef __LINUX_USB_RNDIS_HOST_H
+#define __LINUX_USB_RNDIS_HOST_H
 
 /*
  * CONTROL uses CDC "encapsulated commands" with funky notifications.
@@ -270,5 +268,4 @@ extern int rndis_rx_fixup(struct usbnet *dev, struct sk_buff *skb);
 extern struct sk_buff *
 rndis_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags);
 
-#endif  /* __RNDIS_HOST_H */
-
+#endif  /* __LINUX_USB_RNDIS_HOST_H */
diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h
index 21b4a1c6f585..8f891cbaf9ab 100644
--- a/include/linux/usb/serial.h
+++ b/include/linux/usb/serial.h
@@ -10,7 +10,6 @@
  *
  */
 
-
 #ifndef __LINUX_USB_SERIAL_H
 #define __LINUX_USB_SERIAL_H
 
@@ -146,8 +145,6 @@ struct usb_serial {
 };
 #define to_usb_serial(d) container_of(d, struct usb_serial, kref)
 
-#define NUM_DONT_CARE   99
-
 /* get and set the serial private data pointer helper functions */
 static inline void *usb_get_serial_data(struct usb_serial *serial)
 {
@@ -165,18 +162,6 @@ static inline void usb_set_serial_data(struct usb_serial *serial, void *data)
  *      used in the syslog messages when a device is inserted or removed.
  * @id_table: pointer to a list of usb_device_id structures that define all
  *      of the devices this structure can support.
- * @num_interrupt_in: If a device doesn't have this many interrupt-in
- *      endpoints, it won't be sent to the driver's attach() method.
- *      (But it might still be sent to the probe() method.)
- * @num_interrupt_out: If a device doesn't have this many interrupt-out
- *      endpoints, it won't be sent to the driver's attach() method.
- *      (But it might still be sent to the probe() method.)
- * @num_bulk_in: If a device doesn't have this many bulk-in
- *      endpoints, it won't be sent to the driver's attach() method.
- *      (But it might still be sent to the probe() method.)
- * @num_bulk_out: If a device doesn't have this many bulk-out
- *      endpoints, it won't be sent to the driver's attach() method.
- *      (But it might still be sent to the probe() method.)
  * @num_ports: the number of different ports this device will have.
  * @calc_num_ports: pointer to a function to determine how many ports this
  *      device has dynamically.  It will be called after the probe()
@@ -212,10 +197,6 @@ static inline void usb_set_serial_data(struct usb_serial *serial, void *data)
 struct usb_serial_driver {
         const char *description;
         const struct usb_device_id *id_table;
-        char    num_interrupt_in;
-        char    num_interrupt_out;
-        char    num_bulk_in;
-        char    num_bulk_out;
         char    num_ports;
 
         struct list_head        driver_list;
@@ -340,5 +321,5 @@ static inline void usb_serial_debug_data(int debug,
 
 
 
-#endif  /* ifdef __LINUX_USB_SERIAL_H */
+#endif /* __LINUX_USB_SERIAL_H */
 
diff --git a/include/linux/usb/sl811.h b/include/linux/usb/sl811.h
index 877373da410d..3afe4d16fcef 100644
--- a/include/linux/usb/sl811.h
+++ b/include/linux/usb/sl811.h
@@ -1,9 +1,11 @@
-
 /*
  * board initialization should put one of these into dev->platform_data
  * and place the sl811hs onto platform_bus named "sl811-hcd".
  */
 
+#ifndef __LINUX_USB_SL811_H
+#define __LINUX_USB_SL811_H
+
 struct sl811_platform_data {
         unsigned        can_wakeup:1;
 
@@ -24,3 +26,4 @@ struct sl811_platform_data {
         /* void         (*clock_enable)(struct device *dev, int is_on); */
 };
 
+#endif /* __LINUX_USB_SL811_H */
diff --git a/include/linux/usb/usbnet.h b/include/linux/usb/usbnet.h
index e0501da3dd11..ba09fe88adda 100644
--- a/include/linux/usb/usbnet.h
+++ b/include/linux/usb/usbnet.h
@@ -19,10 +19,8 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
-
-#ifndef __USBNET_H
-#define __USBNET_H
-
+#ifndef __LINUX_USB_USBNET_H
+#define __LINUX_USB_USBNET_H
 
 /* interface from usbnet core to each USB networking link we handle */
 struct usbnet {
@@ -211,4 +209,4 @@ extern int usbnet_nway_reset(struct net_device *net);
         printk(KERN_INFO "%s: " fmt "\n" , (usbnet)->net->name , ## arg); \
 
 
-#endif  /* __USBNET_H */
+#endif /* __LINUX_USB_USBNET_H */