aboutsummaryrefslogtreecommitdiffstats
path: root/include/linux/ssb/ssb_driver_gige.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/linux/ssb/ssb_driver_gige.h')
-rw-r--r--include/linux/ssb/ssb_driver_gige.h174
1 files changed, 174 insertions, 0 deletions
diff --git a/include/linux/ssb/ssb_driver_gige.h b/include/linux/ssb/ssb_driver_gige.h
new file mode 100644
index 000000000000..01fbdf5fef22
--- /dev/null
+++ b/include/linux/ssb/ssb_driver_gige.h
@@ -0,0 +1,174 @@
1#ifndef LINUX_SSB_DRIVER_GIGE_H_
2#define LINUX_SSB_DRIVER_GIGE_H_
3
4#include <linux/ssb/ssb.h>
5#include <linux/pci.h>
6#include <linux/spinlock.h>
7
8
9#ifdef CONFIG_SSB_DRIVER_GIGE
10
11
12#define SSB_GIGE_PCIIO 0x0000 /* PCI I/O Registers (1024 bytes) */
13#define SSB_GIGE_RESERVED 0x0400 /* Reserved (1024 bytes) */
14#define SSB_GIGE_PCICFG 0x0800 /* PCI config space (256 bytes) */
15#define SSB_GIGE_SHIM_FLUSHSTAT 0x0C00 /* PCI to OCP: Flush status control (32bit) */
16#define SSB_GIGE_SHIM_FLUSHRDA 0x0C04 /* PCI to OCP: Flush read address (32bit) */
17#define SSB_GIGE_SHIM_FLUSHTO 0x0C08 /* PCI to OCP: Flush timeout counter (32bit) */
18#define SSB_GIGE_SHIM_BARRIER 0x0C0C /* PCI to OCP: Barrier register (32bit) */
19#define SSB_GIGE_SHIM_MAOCPSI 0x0C10 /* PCI to OCP: MaocpSI Control (32bit) */
20#define SSB_GIGE_SHIM_SIOCPMA 0x0C14 /* PCI to OCP: SiocpMa Control (32bit) */
21
22/* TM Status High flags */
23#define SSB_GIGE_TMSHIGH_RGMII 0x00010000 /* Have an RGMII PHY-bus */
24/* TM Status Low flags */
25#define SSB_GIGE_TMSLOW_TXBYPASS 0x00080000 /* TX bypass (no delay) */
26#define SSB_GIGE_TMSLOW_RXBYPASS 0x00100000 /* RX bypass (no delay) */
27#define SSB_GIGE_TMSLOW_DLLEN 0x01000000 /* Enable DLL controls */
28
29/* Boardflags (low) */
30#define SSB_GIGE_BFL_ROBOSWITCH 0x0010
31
32
33#define SSB_GIGE_MEM_RES_NAME "SSB Broadcom 47xx GigE memory"
34#define SSB_GIGE_IO_RES_NAME "SSB Broadcom 47xx GigE I/O"
35
36struct ssb_gige {
37 struct ssb_device *dev;
38
39 spinlock_t lock;
40
41 /* True, if the device has an RGMII bus.
42 * False, if the device has a GMII bus. */
43 bool has_rgmii;
44
45 /* The PCI controller device. */
46 struct pci_controller pci_controller;
47 struct pci_ops pci_ops;
48 struct resource mem_resource;
49 struct resource io_resource;
50};
51
52/* Check whether a PCI device is a SSB Gigabit Ethernet core. */
53extern bool pdev_is_ssb_gige_core(struct pci_dev *pdev);
54
55/* Convert a pci_dev pointer to a ssb_gige pointer. */
56static inline struct ssb_gige * pdev_to_ssb_gige(struct pci_dev *pdev)
57{
58 if (!pdev_is_ssb_gige_core(pdev))
59 return NULL;
60 return container_of(pdev->bus->ops, struct ssb_gige, pci_ops);
61}
62
63/* Returns whether the PHY is connected by an RGMII bus. */
64static inline bool ssb_gige_is_rgmii(struct pci_dev *pdev)
65{
66 struct ssb_gige *dev = pdev_to_ssb_gige(pdev);
67 return (dev ? dev->has_rgmii : 0);
68}
69
70/* Returns whether we have a Roboswitch. */
71static inline bool ssb_gige_have_roboswitch(struct pci_dev *pdev)
72{
73 struct ssb_gige *dev = pdev_to_ssb_gige(pdev);
74 if (dev)
75 return !!(dev->dev->bus->sprom.boardflags_lo &
76 SSB_GIGE_BFL_ROBOSWITCH);
77 return 0;
78}
79
80/* Returns whether we can only do one DMA at once. */
81static inline bool ssb_gige_one_dma_at_once(struct pci_dev *pdev)
82{
83 struct ssb_gige *dev = pdev_to_ssb_gige(pdev);
84 if (dev)
85 return ((dev->dev->bus->chip_id == 0x4785) &&
86 (dev->dev->bus->chip_rev < 2));
87 return 0;
88}
89
90/* Returns whether we must flush posted writes. */
91static inline bool ssb_gige_must_flush_posted_writes(struct pci_dev *pdev)
92{
93 struct ssb_gige *dev = pdev_to_ssb_gige(pdev);
94 if (dev)
95 return (dev->dev->bus->chip_id == 0x4785);
96 return 0;
97}
98
99extern char * nvram_get(const char *name);
100/* Get the device MAC address */
101static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
102{
103#ifdef CONFIG_BCM947XX
104 char *res = nvram_get("et0macaddr");
105 if (res)
106 memcpy(macaddr, res, 6);
107#endif
108}
109
110extern int ssb_gige_pcibios_plat_dev_init(struct ssb_device *sdev,
111 struct pci_dev *pdev);
112extern int ssb_gige_map_irq(struct ssb_device *sdev,
113 const struct pci_dev *pdev);
114
115/* The GigE driver is not a standalone module, because we don't have support
116 * for unregistering the driver. So we could not unload the module anyway. */
117extern int ssb_gige_init(void);
118static inline void ssb_gige_exit(void)
119{
120 /* Currently we can not unregister the GigE driver,
121 * because we can not unregister the PCI bridge. */
122 BUG();
123}
124
125
126#else /* CONFIG_SSB_DRIVER_GIGE */
127/* Gigabit Ethernet driver disabled */
128
129
130static inline int ssb_gige_pcibios_plat_dev_init(struct ssb_device *sdev,
131 struct pci_dev *pdev)
132{
133 return -ENOSYS;
134}
135static inline int ssb_gige_map_irq(struct ssb_device *sdev,
136 const struct pci_dev *pdev)
137{
138 return -ENOSYS;
139}
140static inline int ssb_gige_init(void)
141{
142 return 0;
143}
144static inline void ssb_gige_exit(void)
145{
146}
147
148static inline bool pdev_is_ssb_gige_core(struct pci_dev *pdev)
149{
150 return 0;
151}
152static inline struct ssb_gige * pdev_to_ssb_gige(struct pci_dev *pdev)
153{
154 return NULL;
155}
156static inline bool ssb_gige_is_rgmii(struct pci_dev *pdev)
157{
158 return 0;
159}
160static inline bool ssb_gige_have_roboswitch(struct pci_dev *pdev)
161{
162 return 0;
163}
164static inline bool ssb_gige_one_dma_at_once(struct pci_dev *pdev)
165{
166 return 0;
167}
168static inline bool ssb_gige_must_flush_posted_writes(struct pci_dev *pdev)
169{
170 return 0;
171}
172
173#endif /* CONFIG_SSB_DRIVER_GIGE */
174#endif /* LINUX_SSB_DRIVER_GIGE_H_ */