1 files changed, 10 insertions, 24 deletions

diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index a0faa18f7b1b..c47c4b4da97e 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -80,6 +80,8 @@ struct spi_device {
 #define SPI_LSB_FIRST   0x08                    /* per-word bits-on-wire */
 #define SPI_3WIRE       0x10                    /* SI/SO signals shared */
 #define SPI_LOOP        0x20                    /* loopback mode */
+#define SPI_NO_CS       0x40                    /* 1 dev/bus, no chipselect */
+#define SPI_READY       0x80                    /* slave pulls low to pause */
         u8                      bits_per_word;
         int                     irq;
         void                    *controller_state;
@@ -245,6 +247,13 @@ struct spi_master {
          */
         u16                     dma_alignment;
 
+        /* spi_device.mode flags understood by this controller driver */
+        u16                     mode_bits;
+
+        /* other constraints relevant to this driver */
+        u16                     flags;
+#define SPI_MASTER_HALF_DUPLEX  BIT(0)          /* can't do full duplex */
+
         /* Setup mode and clock, etc (spi driver may call many times).
          *
          * IMPORTANT:  this may be called when transfers to another
@@ -523,30 +532,7 @@ static inline void spi_message_free(struct spi_message *m)
         kfree(m);
 }
 
-/**
- * spi_setup - setup SPI mode and clock rate
- * @spi: the device whose settings are being modified
- * Context: can sleep, and no requests are queued to the device
- *
- * SPI protocol drivers may need to update the transfer mode if the
- * device doesn't work with its default.  They may likewise need
- * to update clock rates or word sizes from initial values.  This function
- * changes those settings, and must be called from a context that can sleep.
- * Except for SPI_CS_HIGH, which takes effect immediately, the changes take
- * effect the next time the device is selected and data is transferred to
- * or from it.  When this function returns, the spi device is deselected.
- *
- * Note that this call will fail if the protocol driver specifies an option
- * that the underlying controller or its driver does not support.  For
- * example, not all hardware supports wire transfers using nine bit words,
- * LSB-first wire encoding, or active-high chipselects.
- */
-static inline int
-spi_setup(struct spi_device *spi)
-{
-        return spi->master->setup(spi);
-}
-
+extern int spi_setup(struct spi_device *spi);
 
 /**
  * spi_async - asynchronous SPI transfer