aboutsummaryrefslogtreecommitdiffstats
path: root/include/linux/platform_data
diff options
context:
space:
mode:
Diffstat (limited to 'include/linux/platform_data')
-rw-r--r--include/linux/platform_data/at24.h55
-rw-r--r--include/linux/platform_data/clk-nomadik.h2
-rw-r--r--include/linux/platform_data/clk-ux500.h3
-rw-r--r--include/linux/platform_data/dma-s3c24xx.h46
-rw-r--r--include/linux/platform_data/edma.h8
-rw-r--r--include/linux/platform_data/gpio-davinci.h60
-rw-r--r--include/linux/platform_data/leds-lp55xx.h7
-rw-r--r--include/linux/platform_data/leds-pca9685.h35
-rw-r--r--include/linux/platform_data/lm3630_bl.h57
-rw-r--r--include/linux/platform_data/lm3630a_bl.h65
-rw-r--r--include/linux/platform_data/lp855x.h19
-rw-r--r--include/linux/platform_data/mipi-csis.h9
-rw-r--r--include/linux/platform_data/mmc-esdhc-imx.h5
-rw-r--r--include/linux/platform_data/mtd-nand-omap2.h18
-rw-r--r--include/linux/platform_data/pinctrl-adi2.h40
-rw-r--r--include/linux/platform_data/pinctrl-single.h12
-rw-r--r--include/linux/platform_data/usb-ehci-s5p.h21
-rw-r--r--include/linux/platform_data/usb-ohci-exynos.h21
-rw-r--r--include/linux/platform_data/usb-rcar-gen2-phy.h22
-rw-r--r--include/linux/platform_data/zforce_ts.h26
20 files changed, 406 insertions, 125 deletions
diff --git a/include/linux/platform_data/at24.h b/include/linux/platform_data/at24.h
new file mode 100644
index 000000000000..c42aa89d34ee
--- /dev/null
+++ b/include/linux/platform_data/at24.h
@@ -0,0 +1,55 @@
1/*
2 * at24.h - platform_data for the at24 (generic eeprom) driver
3 * (C) Copyright 2008 by Pengutronix
4 * (C) Copyright 2012 by Wolfram Sang
5 * same license as the driver
6 */
7
8#ifndef _LINUX_AT24_H
9#define _LINUX_AT24_H
10
11#include <linux/types.h>
12#include <linux/memory.h>
13
14/**
15 * struct at24_platform_data - data to set up at24 (generic eeprom) driver
16 * @byte_len: size of eeprom in byte
17 * @page_size: number of byte which can be written in one go
18 * @flags: tunable options, check AT24_FLAG_* defines
19 * @setup: an optional callback invoked after eeprom is probed; enables kernel
20 code to access eeprom via memory_accessor, see example
21 * @context: optional parameter passed to setup()
22 *
23 * If you set up a custom eeprom type, please double-check the parameters.
24 * Especially page_size needs extra care, as you risk data loss if your value
25 * is bigger than what the chip actually supports!
26 *
27 * An example in pseudo code for a setup() callback:
28 *
29 * void get_mac_addr(struct memory_accessor *mem_acc, void *context)
30 * {
31 * u8 *mac_addr = ethernet_pdata->mac_addr;
32 * off_t offset = context;
33 *
34 * // Read MAC addr from EEPROM
35 * if (mem_acc->read(mem_acc, mac_addr, offset, ETH_ALEN) == ETH_ALEN)
36 * pr_info("Read MAC addr from EEPROM: %pM\n", mac_addr);
37 * }
38 *
39 * This function pointer and context can now be set up in at24_platform_data.
40 */
41
42struct at24_platform_data {
43 u32 byte_len; /* size (sum of all addr) */
44 u16 page_size; /* for writes */
45 u8 flags;
46#define AT24_FLAG_ADDR16 0x80 /* address pointer is 16 bit */
47#define AT24_FLAG_READONLY 0x40 /* sysfs-entry will be read-only */
48#define AT24_FLAG_IRUGO 0x20 /* sysfs-entry will be world-readable */
49#define AT24_FLAG_TAKE8ADDR 0x10 /* take always 8 addresses (24c00) */
50
51 void (*setup)(struct memory_accessor *, void *context);
52 void *context;
53};
54
55#endif /* _LINUX_AT24_H */
diff --git a/include/linux/platform_data/clk-nomadik.h b/include/linux/platform_data/clk-nomadik.h
deleted file mode 100644
index 5713c87b2477..000000000000
--- a/include/linux/platform_data/clk-nomadik.h
+++ /dev/null
@@ -1,2 +0,0 @@
1/* Minimal platform data header */
2void nomadik_clk_init(void);
diff --git a/include/linux/platform_data/clk-ux500.h b/include/linux/platform_data/clk-ux500.h
index 9d98f3aaa16c..97baf831e071 100644
--- a/include/linux/platform_data/clk-ux500.h
+++ b/include/linux/platform_data/clk-ux500.h
@@ -10,6 +10,9 @@
10#ifndef __CLK_UX500_H 10#ifndef __CLK_UX500_H
11#define __CLK_UX500_H 11#define __CLK_UX500_H
12 12
13void u8500_of_clk_init(u32 clkrst1_base, u32 clkrst2_base, u32 clkrst3_base,
14 u32 clkrst5_base, u32 clkrst6_base);
15
13void u8500_clk_init(u32 clkrst1_base, u32 clkrst2_base, u32 clkrst3_base, 16void u8500_clk_init(u32 clkrst1_base, u32 clkrst2_base, u32 clkrst3_base,
14 u32 clkrst5_base, u32 clkrst6_base); 17 u32 clkrst5_base, u32 clkrst6_base);
15void u9540_clk_init(u32 clkrst1_base, u32 clkrst2_base, u32 clkrst3_base, 18void u9540_clk_init(u32 clkrst1_base, u32 clkrst2_base, u32 clkrst3_base,
diff --git a/include/linux/platform_data/dma-s3c24xx.h b/include/linux/platform_data/dma-s3c24xx.h
new file mode 100644
index 000000000000..89ba1b0c90e4
--- /dev/null
+++ b/include/linux/platform_data/dma-s3c24xx.h
@@ -0,0 +1,46 @@
1/*
2 * S3C24XX DMA handling
3 *
4 * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
5 *
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License as published by the Free
8 * Software Foundation; either version 2 of the License, or (at your option)
9 * any later version.
10 */
11
12/* Helper to encode the source selection constraints for early s3c socs. */
13#define S3C24XX_DMA_CHANREQ(src, chan) ((BIT(3) | src) << chan * 4)
14
15enum s3c24xx_dma_bus {
16 S3C24XX_DMA_APB,
17 S3C24XX_DMA_AHB,
18};
19
20/**
21 * @bus: on which bus does the peripheral reside - AHB or APB.
22 * @handshake: is a handshake with the peripheral necessary
23 * @chansel: channel selection information, depending on variant; reqsel for
24 * s3c2443 and later and channel-selection map for earlier SoCs
25 * see CHANSEL doc in s3c2443-dma.c
26 */
27struct s3c24xx_dma_channel {
28 enum s3c24xx_dma_bus bus;
29 bool handshake;
30 u16 chansel;
31};
32
33/**
34 * struct s3c24xx_dma_platdata - platform specific settings
35 * @num_phy_channels: number of physical channels
36 * @channels: array of virtual channel descriptions
37 * @num_channels: number of virtual channels
38 */
39struct s3c24xx_dma_platdata {
40 int num_phy_channels;
41 struct s3c24xx_dma_channel *channels;
42 int num_channels;
43};
44
45struct dma_chan;
46bool s3c24xx_dma_filter(struct dma_chan *chan, void *param);
diff --git a/include/linux/platform_data/edma.h b/include/linux/platform_data/edma.h
index 179fb91bb5f2..f50821cb64be 100644
--- a/include/linux/platform_data/edma.h
+++ b/include/linux/platform_data/edma.h
@@ -67,10 +67,10 @@ struct edmacc_param {
67#define ITCCHEN BIT(23) 67#define ITCCHEN BIT(23)
68 68
69/*ch_status paramater of callback function possible values*/ 69/*ch_status paramater of callback function possible values*/
70#define DMA_COMPLETE 1 70#define EDMA_DMA_COMPLETE 1
71#define DMA_CC_ERROR 2 71#define EDMA_DMA_CC_ERROR 2
72#define DMA_TC1_ERROR 3 72#define EDMA_DMA_TC1_ERROR 3
73#define DMA_TC2_ERROR 4 73#define EDMA_DMA_TC2_ERROR 4
74 74
75enum address_mode { 75enum address_mode {
76 INCR = 0, 76 INCR = 0,
diff --git a/include/linux/platform_data/gpio-davinci.h b/include/linux/platform_data/gpio-davinci.h
new file mode 100644
index 000000000000..6efd20264585
--- /dev/null
+++ b/include/linux/platform_data/gpio-davinci.h
@@ -0,0 +1,60 @@
1/*
2 * DaVinci GPIO Platform Related Defines
3 *
4 * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
5 *
6 * This program is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU General Public License as
8 * published by the Free Software Foundation version 2.
9 *
10 * This program is distributed "as is" WITHOUT ANY WARRANTY of any
11 * kind, whether express or implied; without even the implied warranty
12 * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
14 */
15
16#ifndef __DAVINCI_GPIO_PLATFORM_H
17#define __DAVINCI_GPIO_PLATFORM_H
18
19#include <linux/io.h>
20#include <linux/spinlock.h>
21
22#include <asm-generic/gpio.h>
23
24enum davinci_gpio_type {
25 GPIO_TYPE_TNETV107X = 0,
26};
27
28struct davinci_gpio_platform_data {
29 u32 ngpio;
30 u32 gpio_unbanked;
31 u32 intc_irq_num;
32};
33
34
35struct davinci_gpio_controller {
36 struct gpio_chip chip;
37 int irq_base;
38 /* Serialize access to GPIO registers */
39 spinlock_t lock;
40 void __iomem *regs;
41 void __iomem *set_data;
42 void __iomem *clr_data;
43 void __iomem *in_data;
44 int gpio_unbanked;
45 unsigned gpio_irq;
46};
47
48/*
49 * basic gpio routines
50 */
51#define GPIO(X) (X) /* 0 <= X <= (DAVINCI_N_GPIO - 1) */
52
53/* Convert GPIO signal to GPIO pin number */
54#define GPIO_TO_PIN(bank, gpio) (16 * (bank) + (gpio))
55
56static inline u32 __gpio_mask(unsigned gpio)
57{
58 return 1 << (gpio % 32);
59}
60#endif
diff --git a/include/linux/platform_data/leds-lp55xx.h b/include/linux/platform_data/leds-lp55xx.h
index 51a2ff579d60..624ff9edad6f 100644
--- a/include/linux/platform_data/leds-lp55xx.h
+++ b/include/linux/platform_data/leds-lp55xx.h
@@ -22,6 +22,7 @@
22 22
23struct lp55xx_led_config { 23struct lp55xx_led_config {
24 const char *name; 24 const char *name;
25 const char *default_trigger;
25 u8 chan_nr; 26 u8 chan_nr;
26 u8 led_current; /* mA x10, 0 if led is not connected */ 27 u8 led_current; /* mA x10, 0 if led is not connected */
27 u8 max_current; 28 u8 max_current;
@@ -66,10 +67,8 @@ struct lp55xx_platform_data {
66 /* Clock configuration */ 67 /* Clock configuration */
67 u8 clock_mode; 68 u8 clock_mode;
68 69
69 /* Platform specific functions */ 70 /* optional enable GPIO */
70 int (*setup_resources)(void); 71 int enable_gpio;
71 void (*release_resources)(void);
72 void (*enable)(bool state);
73 72
74 /* Predefined pattern data */ 73 /* Predefined pattern data */
75 struct lp55xx_predef_pattern *patterns; 74 struct lp55xx_predef_pattern *patterns;
diff --git a/include/linux/platform_data/leds-pca9685.h b/include/linux/platform_data/leds-pca9685.h
new file mode 100644
index 000000000000..778e9e4249cc
--- /dev/null
+++ b/include/linux/platform_data/leds-pca9685.h
@@ -0,0 +1,35 @@
1/*
2 * Copyright 2013 Maximilian Güntner <maximilian.guentner@gmail.com>
3 *
4 * This file is subject to the terms and conditions of version 2 of
5 * the GNU General Public License. See the file COPYING in the main
6 * directory of this archive for more details.
7 *
8 * Based on leds-pca963x.h by Peter Meerwald <p.meerwald@bct-electronic.com>
9 *
10 * LED driver for the NXP PCA9685 PWM chip
11 *
12 */
13
14#ifndef __LINUX_PCA9685_H
15#define __LINUX_PCA9685_H
16
17#include <linux/leds.h>
18
19enum pca9685_outdrv {
20 PCA9685_OPEN_DRAIN,
21 PCA9685_TOTEM_POLE,
22};
23
24enum pca9685_inverted {
25 PCA9685_NOT_INVERTED,
26 PCA9685_INVERTED,
27};
28
29struct pca9685_platform_data {
30 struct led_platform_data leds;
31 enum pca9685_outdrv outdrv;
32 enum pca9685_inverted inverted;
33};
34
35#endif /* __LINUX_PCA9685_H */
diff --git a/include/linux/platform_data/lm3630_bl.h b/include/linux/platform_data/lm3630_bl.h
deleted file mode 100644
index 9176dd3f2d63..000000000000
--- a/include/linux/platform_data/lm3630_bl.h
+++ /dev/null
@@ -1,57 +0,0 @@
1/*
2* Simple driver for Texas Instruments LM3630 LED Flash driver chip
3* Copyright (C) 2012 Texas Instruments
4*
5* This program is free software; you can redistribute it and/or modify
6* it under the terms of the GNU General Public License version 2 as
7* published by the Free Software Foundation.
8*
9*/
10
11#ifndef __LINUX_LM3630_H
12#define __LINUX_LM3630_H
13
14#define LM3630_NAME "lm3630_bl"
15
16enum lm3630_pwm_ctrl {
17 PWM_CTRL_DISABLE = 0,
18 PWM_CTRL_BANK_A,
19 PWM_CTRL_BANK_B,
20 PWM_CTRL_BANK_ALL,
21};
22
23enum lm3630_pwm_active {
24 PWM_ACTIVE_HIGH = 0,
25 PWM_ACTIVE_LOW,
26};
27
28enum lm3630_bank_a_ctrl {
29 BANK_A_CTRL_DISABLE = 0x0,
30 BANK_A_CTRL_LED1 = 0x4,
31 BANK_A_CTRL_LED2 = 0x1,
32 BANK_A_CTRL_ALL = 0x5,
33};
34
35enum lm3630_bank_b_ctrl {
36 BANK_B_CTRL_DISABLE = 0,
37 BANK_B_CTRL_LED2,
38};
39
40struct lm3630_platform_data {
41
42 /* maximum brightness */
43 int max_brt_led1;
44 int max_brt_led2;
45
46 /* initial on brightness */
47 int init_brt_led1;
48 int init_brt_led2;
49 enum lm3630_pwm_ctrl pwm_ctrl;
50 enum lm3630_pwm_active pwm_active;
51 enum lm3630_bank_a_ctrl bank_a_ctrl;
52 enum lm3630_bank_b_ctrl bank_b_ctrl;
53 unsigned int pwm_period;
54 void (*pwm_set_intensity) (int brightness, int max_brightness);
55};
56
57#endif /* __LINUX_LM3630_H */
diff --git a/include/linux/platform_data/lm3630a_bl.h b/include/linux/platform_data/lm3630a_bl.h
new file mode 100644
index 000000000000..7538e38e270b
--- /dev/null
+++ b/include/linux/platform_data/lm3630a_bl.h
@@ -0,0 +1,65 @@
1/*
2* Simple driver for Texas Instruments LM3630A LED Flash driver chip
3* Copyright (C) 2012 Texas Instruments
4*
5* This program is free software; you can redistribute it and/or modify
6* it under the terms of the GNU General Public License version 2 as
7* published by the Free Software Foundation.
8*
9*/
10
11#ifndef __LINUX_LM3630A_H
12#define __LINUX_LM3630A_H
13
14#define LM3630A_NAME "lm3630a_bl"
15
16enum lm3630a_pwm_ctrl {
17 LM3630A_PWM_DISABLE = 0x00,
18 LM3630A_PWM_BANK_A,
19 LM3630A_PWM_BANK_B,
20 LM3630A_PWM_BANK_ALL,
21 LM3630A_PWM_BANK_A_ACT_LOW = 0x05,
22 LM3630A_PWM_BANK_B_ACT_LOW,
23 LM3630A_PWM_BANK_ALL_ACT_LOW,
24};
25
26enum lm3630a_leda_ctrl {
27 LM3630A_LEDA_DISABLE = 0x00,
28 LM3630A_LEDA_ENABLE = 0x04,
29 LM3630A_LEDA_ENABLE_LINEAR = 0x14,
30};
31
32enum lm3630a_ledb_ctrl {
33 LM3630A_LEDB_DISABLE = 0x00,
34 LM3630A_LEDB_ON_A = 0x01,
35 LM3630A_LEDB_ENABLE = 0x02,
36 LM3630A_LEDB_ENABLE_LINEAR = 0x0A,
37};
38
39#define LM3630A_MAX_BRIGHTNESS 255
40/*
41 *@leda_init_brt : led a init brightness. 4~255
42 *@leda_max_brt : led a max brightness. 4~255
43 *@leda_ctrl : led a disable, enable linear, enable exponential
44 *@ledb_init_brt : led b init brightness. 4~255
45 *@ledb_max_brt : led b max brightness. 4~255
46 *@ledb_ctrl : led b disable, enable linear, enable exponential
47 *@pwm_period : pwm period
48 *@pwm_ctrl : pwm disable, bank a or b, active high or low
49 */
50struct lm3630a_platform_data {
51
52 /* led a config. */
53 int leda_init_brt;
54 int leda_max_brt;
55 enum lm3630a_leda_ctrl leda_ctrl;
56 /* led b config. */
57 int ledb_init_brt;
58 int ledb_max_brt;
59 enum lm3630a_ledb_ctrl ledb_ctrl;
60 /* pwm config. */
61 unsigned int pwm_period;
62 enum lm3630a_pwm_ctrl pwm_ctrl;
63};
64
65#endif /* __LINUX_LM3630A_H */
diff --git a/include/linux/platform_data/lp855x.h b/include/linux/platform_data/lp855x.h
index ea3200527dd3..1b2ba24e4e03 100644
--- a/include/linux/platform_data/lp855x.h
+++ b/include/linux/platform_data/lp855x.h
@@ -40,6 +40,17 @@
40#define LP8553_PWM_CONFIG LP8550_PWM_CONFIG 40#define LP8553_PWM_CONFIG LP8550_PWM_CONFIG
41#define LP8553_I2C_CONFIG LP8550_I2C_CONFIG 41#define LP8553_I2C_CONFIG LP8550_I2C_CONFIG
42 42
43/* CONFIG register - LP8555 */
44#define LP8555_PWM_STANDBY BIT(7)
45#define LP8555_PWM_FILTER BIT(6)
46#define LP8555_RELOAD_EPROM BIT(3) /* use it if EPROMs should be reset
47 when the backlight turns on */
48#define LP8555_OFF_OPENLEDS BIT(2)
49#define LP8555_PWM_CONFIG LP8555_PWM_ONLY
50#define LP8555_I2C_CONFIG LP8555_I2C_ONLY
51#define LP8555_COMB1_CONFIG LP8555_COMBINED1
52#define LP8555_COMB2_CONFIG LP8555_COMBINED2
53
43/* DEVICE CONTROL register - LP8556 */ 54/* DEVICE CONTROL register - LP8556 */
44#define LP8556_PWM_CONFIG (LP8556_PWM_ONLY << BRT_MODE_SHFT) 55#define LP8556_PWM_CONFIG (LP8556_PWM_ONLY << BRT_MODE_SHFT)
45#define LP8556_COMB1_CONFIG (LP8556_COMBINED1 << BRT_MODE_SHFT) 56#define LP8556_COMB1_CONFIG (LP8556_COMBINED1 << BRT_MODE_SHFT)
@@ -65,6 +76,7 @@ enum lp855x_chip_id {
65 LP8551, 76 LP8551,
66 LP8552, 77 LP8552,
67 LP8553, 78 LP8553,
79 LP8555,
68 LP8556, 80 LP8556,
69 LP8557, 81 LP8557,
70}; 82};
@@ -89,6 +101,13 @@ enum lp8553_brighntess_source {
89 LP8553_I2C_ONLY = LP8550_I2C_ONLY, 101 LP8553_I2C_ONLY = LP8550_I2C_ONLY,
90}; 102};
91 103
104enum lp8555_brightness_source {
105 LP8555_PWM_ONLY,
106 LP8555_I2C_ONLY,
107 LP8555_COMBINED1, /* Brightness register with shaped PWM */
108 LP8555_COMBINED2, /* PWM with shaped brightness register */
109};
110
92enum lp8556_brightness_source { 111enum lp8556_brightness_source {
93 LP8556_PWM_ONLY, 112 LP8556_PWM_ONLY,
94 LP8556_COMBINED1, /* pwm + i2c before the shaper block */ 113 LP8556_COMBINED1, /* pwm + i2c before the shaper block */
diff --git a/include/linux/platform_data/mipi-csis.h b/include/linux/platform_data/mipi-csis.h
index bf34e17cee7f..c2fd9024717c 100644
--- a/include/linux/platform_data/mipi-csis.h
+++ b/include/linux/platform_data/mipi-csis.h
@@ -25,13 +25,4 @@ struct s5p_platform_mipi_csis {
25 u8 hs_settle; 25 u8 hs_settle;
26}; 26};
27 27
28/**
29 * s5p_csis_phy_enable - global MIPI-CSI receiver D-PHY control
30 * @id: MIPI-CSIS harware instance index (0...1)
31 * @on: true to enable D-PHY and deassert its reset
32 * false to disable D-PHY
33 * @return: 0 on success, or negative error code on failure
34 */
35int s5p_csis_phy_enable(int id, bool on);
36
37#endif /* __PLAT_SAMSUNG_MIPI_CSIS_H_ */ 28#endif /* __PLAT_SAMSUNG_MIPI_CSIS_H_ */
diff --git a/include/linux/platform_data/mmc-esdhc-imx.h b/include/linux/platform_data/mmc-esdhc-imx.h
index d44912d81578..75f70f6ac137 100644
--- a/include/linux/platform_data/mmc-esdhc-imx.h
+++ b/include/linux/platform_data/mmc-esdhc-imx.h
@@ -10,6 +10,8 @@
10#ifndef __ASM_ARCH_IMX_ESDHC_H 10#ifndef __ASM_ARCH_IMX_ESDHC_H
11#define __ASM_ARCH_IMX_ESDHC_H 11#define __ASM_ARCH_IMX_ESDHC_H
12 12
13#include <linux/types.h>
14
13enum wp_types { 15enum wp_types {
14 ESDHC_WP_NONE, /* no WP, neither controller nor gpio */ 16 ESDHC_WP_NONE, /* no WP, neither controller nor gpio */
15 ESDHC_WP_CONTROLLER, /* mmc controller internal WP */ 17 ESDHC_WP_CONTROLLER, /* mmc controller internal WP */
@@ -32,6 +34,7 @@ enum cd_types {
32 * @cd_gpio: gpio for card_detect interrupt 34 * @cd_gpio: gpio for card_detect interrupt
33 * @wp_type: type of write_protect method (see wp_types enum above) 35 * @wp_type: type of write_protect method (see wp_types enum above)
34 * @cd_type: type of card_detect method (see cd_types enum above) 36 * @cd_type: type of card_detect method (see cd_types enum above)
37 * @support_vsel: indicate it supports 1.8v switching
35 */ 38 */
36 39
37struct esdhc_platform_data { 40struct esdhc_platform_data {
@@ -41,5 +44,7 @@ struct esdhc_platform_data {
41 enum cd_types cd_type; 44 enum cd_types cd_type;
42 int max_bus_width; 45 int max_bus_width;
43 unsigned int f_max; 46 unsigned int f_max;
47 bool support_vsel;
48 unsigned int delay_line;
44}; 49};
45#endif /* __ASM_ARCH_IMX_ESDHC_H */ 50#endif /* __ASM_ARCH_IMX_ESDHC_H */
diff --git a/include/linux/platform_data/mtd-nand-omap2.h b/include/linux/platform_data/mtd-nand-omap2.h
index 6bf9ef43ddb1..4da5bfa2147f 100644
--- a/include/linux/platform_data/mtd-nand-omap2.h
+++ b/include/linux/platform_data/mtd-nand-omap2.h
@@ -23,13 +23,16 @@ enum nand_io {
23}; 23};
24 24
25enum omap_ecc { 25enum omap_ecc {
26 /* 1-bit ecc: stored at end of spare area */ 26 /* 1-bit ECC calculation by GPMC, Error detection by Software */
27 OMAP_ECC_HAMMING_CODE_DEFAULT = 0, /* Default, s/w method */ 27 OMAP_ECC_HAM1_CODE_HW = 0,
28 OMAP_ECC_HAMMING_CODE_HW, /* gpmc to detect the error */ 28 /* 4-bit ECC calculation by GPMC, Error detection by Software */
29 /* 1-bit ecc: stored at beginning of spare area as romcode */ 29 OMAP_ECC_BCH4_CODE_HW_DETECTION_SW,
30 OMAP_ECC_HAMMING_CODE_HW_ROMCODE, /* gpmc method & romcode layout */ 30 /* 4-bit ECC calculation by GPMC, Error detection by ELM */
31 OMAP_ECC_BCH4_CODE_HW, /* 4-bit BCH ecc code */ 31 OMAP_ECC_BCH4_CODE_HW,
32 OMAP_ECC_BCH8_CODE_HW, /* 8-bit BCH ecc code */ 32 /* 8-bit ECC calculation by GPMC, Error detection by Software */
33 OMAP_ECC_BCH8_CODE_HW_DETECTION_SW,
34 /* 8-bit ECC calculation by GPMC, Error detection by ELM */
35 OMAP_ECC_BCH8_CODE_HW,
33}; 36};
34 37
35struct gpmc_nand_regs { 38struct gpmc_nand_regs {
@@ -63,5 +66,6 @@ struct omap_nand_platform_data {
63 66
64 /* for passing the partitions */ 67 /* for passing the partitions */
65 struct device_node *of_node; 68 struct device_node *of_node;
69 struct device_node *elm_of_node;
66}; 70};
67#endif 71#endif
diff --git a/include/linux/platform_data/pinctrl-adi2.h b/include/linux/platform_data/pinctrl-adi2.h
new file mode 100644
index 000000000000..8f91300617ec
--- /dev/null
+++ b/include/linux/platform_data/pinctrl-adi2.h
@@ -0,0 +1,40 @@
1/*
2 * Pinctrl Driver for ADI GPIO2 controller
3 *
4 * Copyright 2007-2013 Analog Devices Inc.
5 *
6 * Licensed under the GPLv2 or later
7 */
8
9
10#ifndef PINCTRL_ADI2_H
11#define PINCTRL_ADI2_H
12
13#include <linux/io.h>
14#include <linux/platform_device.h>
15
16/**
17 * struct adi_pinctrl_gpio_platform_data - Pinctrl gpio platform data
18 * for ADI GPIO2 device.
19 *
20 * @port_gpio_base: Optional global GPIO index of the GPIO bank.
21 * 0 means driver decides.
22 * @port_pin_base: Pin index of the pin controller device.
23 * @port_width: PIN number of the GPIO bank device
24 * @pint_id: GPIO PINT device id that this GPIO bank should map to.
25 * @pint_assign: The 32-bit GPIO PINT registers can be divided into 2 parts. A
26 * GPIO bank can be mapped into either low 16 bits[0] or high 16
27 * bits[1] of each PINT register.
28 * @pint_map: GIOP bank mapping code in PINT device
29 */
30struct adi_pinctrl_gpio_platform_data {
31 unsigned int port_gpio_base;
32 unsigned int port_pin_base;
33 unsigned int port_width;
34 u8 pinctrl_id;
35 u8 pint_id;
36 bool pint_assign;
37 u8 pint_map;
38};
39
40#endif
diff --git a/include/linux/platform_data/pinctrl-single.h b/include/linux/platform_data/pinctrl-single.h
new file mode 100644
index 000000000000..72eacda9b360
--- /dev/null
+++ b/include/linux/platform_data/pinctrl-single.h
@@ -0,0 +1,12 @@
1/**
2 * irq: optional wake-up interrupt
3 * rearm: optional soc specific rearm function
4 *
5 * Note that the irq and rearm setup should come from device
6 * tree except for omap where there are still some dependencies
7 * to the legacy PRM code.
8 */
9struct pcs_pdata {
10 int irq;
11 void (*rearm)(void);
12};
diff --git a/include/linux/platform_data/usb-ehci-s5p.h b/include/linux/platform_data/usb-ehci-s5p.h
deleted file mode 100644
index 5f28cae18582..000000000000
--- a/include/linux/platform_data/usb-ehci-s5p.h
+++ /dev/null
@@ -1,21 +0,0 @@
1/*
2 * Copyright (C) 2011 Samsung Electronics Co.Ltd
3 * Author: Joonyoung Shim <jy0922.shim@samsung.com>
4 *
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms of the GNU General Public License as published by the
7 * Free Software Foundation; either version 2 of the License, or (at your
8 * option) any later version.
9 */
10
11#ifndef __PLAT_SAMSUNG_EHCI_H
12#define __PLAT_SAMSUNG_EHCI_H __FILE__
13
14struct s5p_ehci_platdata {
15 int (*phy_init)(struct platform_device *pdev, int type);
16 int (*phy_exit)(struct platform_device *pdev, int type);
17};
18
19extern void s5p_ehci_set_platdata(struct s5p_ehci_platdata *pd);
20
21#endif /* __PLAT_SAMSUNG_EHCI_H */
diff --git a/include/linux/platform_data/usb-ohci-exynos.h b/include/linux/platform_data/usb-ohci-exynos.h
deleted file mode 100644
index c256c595be5e..000000000000
--- a/include/linux/platform_data/usb-ohci-exynos.h
+++ /dev/null
@@ -1,21 +0,0 @@
1/*
2 * Copyright (C) 2011 Samsung Electronics Co.Ltd
3 * http://www.samsung.com/
4 *
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms of the GNU General Public License as published by the
7 * Free Software Foundation; either version 2 of the License, or (at your
8 * option) any later version.
9 */
10
11#ifndef __MACH_EXYNOS_OHCI_H
12#define __MACH_EXYNOS_OHCI_H
13
14struct exynos4_ohci_platdata {
15 int (*phy_init)(struct platform_device *pdev, int type);
16 int (*phy_exit)(struct platform_device *pdev, int type);
17};
18
19extern void exynos4_ohci_set_platdata(struct exynos4_ohci_platdata *pd);
20
21#endif /* __MACH_EXYNOS_OHCI_H */
diff --git a/include/linux/platform_data/usb-rcar-gen2-phy.h b/include/linux/platform_data/usb-rcar-gen2-phy.h
new file mode 100644
index 000000000000..dd3ba46c0d90
--- /dev/null
+++ b/include/linux/platform_data/usb-rcar-gen2-phy.h
@@ -0,0 +1,22 @@
1/*
2 * Copyright (C) 2013 Renesas Solutions Corp.
3 * Copyright (C) 2013 Cogent Embedded, Inc.
4 *
5 * This program is free software; you can redistribute it and/or modify
6 * it under the terms of the GNU General Public License version 2 as
7 * published by the Free Software Foundation.
8 */
9
10#ifndef __USB_RCAR_GEN2_PHY_H
11#define __USB_RCAR_GEN2_PHY_H
12
13#include <linux/types.h>
14
15struct rcar_gen2_phy_platform_data {
16 /* USB channel 0 configuration */
17 bool chan0_pci:1; /* true: PCI USB host 0, false: USBHS */
18 /* USB channel 2 configuration */
19 bool chan2_pci:1; /* true: PCI USB host 2, false: USBSS */
20};
21
22#endif
diff --git a/include/linux/platform_data/zforce_ts.h b/include/linux/platform_data/zforce_ts.h
new file mode 100644
index 000000000000..0472ab2f6ede
--- /dev/null
+++ b/include/linux/platform_data/zforce_ts.h
@@ -0,0 +1,26 @@
1/* drivers/input/touchscreen/zforce.c
2 *
3 * Copyright (C) 2012-2013 MundoReader S.L.
4 *
5 * This software is licensed under the terms of the GNU General Public
6 * License version 2, as published by the Free Software Foundation, and
7 * may be copied, distributed, and modified under those terms.
8 *
9 * This program is distributed in the hope that it will be useful,
10 * but WITHOUT ANY WARRANTY; without even the implied warranty of
11 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 * GNU General Public License for more details.
13 */
14
15#ifndef _LINUX_INPUT_ZFORCE_TS_H
16#define _LINUX_INPUT_ZFORCE_TS_H
17
18struct zforce_ts_platdata {
19 int gpio_int;
20 int gpio_rst;
21
22 unsigned int x_max;
23 unsigned int y_max;
24};
25
26#endif /* _LINUX_INPUT_ZFORCE_TS_H */
generated by cgit v1.2.2 (git 2.25.0) at 2026-01-19 05:08:38 -0500