diff options
Diffstat (limited to 'include/linux/platform_data/video-pxafb.h')
| -rw-r--r-- | include/linux/platform_data/video-pxafb.h | 175 |
1 files changed, 175 insertions, 0 deletions
diff --git a/include/linux/platform_data/video-pxafb.h b/include/linux/platform_data/video-pxafb.h new file mode 100644 index 000000000000..486b4c519ae2 --- /dev/null +++ b/include/linux/platform_data/video-pxafb.h | |||
| @@ -0,0 +1,175 @@ | |||
| 1 | /* | ||
| 2 | * arch/arm/mach-pxa/include/mach/pxafb.h | ||
| 3 | * | ||
| 4 | * Support for the xscale frame buffer. | ||
| 5 | * | ||
| 6 | * Author: Jean-Frederic Clere | ||
| 7 | * Created: Sep 22, 2003 | ||
| 8 | * Copyright: jfclere@sinix.net | ||
| 9 | * | ||
| 10 | * This program is free software; you can redistribute it and/or modify | ||
| 11 | * it under the terms of the GNU General Public License version 2 as | ||
| 12 | * published by the Free Software Foundation. | ||
| 13 | */ | ||
| 14 | |||
| 15 | #include <linux/fb.h> | ||
| 16 | #include <mach/regs-lcd.h> | ||
| 17 | |||
| 18 | /* | ||
| 19 | * Supported LCD connections | ||
| 20 | * | ||
| 21 | * bits 0 - 3: for LCD panel type: | ||
| 22 | * | ||
| 23 | * STN - for passive matrix | ||
| 24 | * DSTN - for dual scan passive matrix | ||
| 25 | * TFT - for active matrix | ||
| 26 | * | ||
| 27 | * bits 4 - 9 : for bus width | ||
| 28 | * bits 10-17 : for AC Bias Pin Frequency | ||
| 29 | * bit 18 : for output enable polarity | ||
| 30 | * bit 19 : for pixel clock edge | ||
| 31 | * bit 20 : for output pixel format when base is RGBT16 | ||
| 32 | */ | ||
| 33 | #define LCD_CONN_TYPE(_x) ((_x) & 0x0f) | ||
| 34 | #define LCD_CONN_WIDTH(_x) (((_x) >> 4) & 0x1f) | ||
| 35 | |||
| 36 | #define LCD_TYPE_MASK 0xf | ||
| 37 | #define LCD_TYPE_UNKNOWN 0 | ||
| 38 | #define LCD_TYPE_MONO_STN 1 | ||
| 39 | #define LCD_TYPE_MONO_DSTN 2 | ||
| 40 | #define LCD_TYPE_COLOR_STN 3 | ||
| 41 | #define LCD_TYPE_COLOR_DSTN 4 | ||
| 42 | #define LCD_TYPE_COLOR_TFT 5 | ||
| 43 | #define LCD_TYPE_SMART_PANEL 6 | ||
| 44 | #define LCD_TYPE_MAX 7 | ||
| 45 | |||
| 46 | #define LCD_MONO_STN_4BPP ((4 << 4) | LCD_TYPE_MONO_STN) | ||
| 47 | #define LCD_MONO_STN_8BPP ((8 << 4) | LCD_TYPE_MONO_STN) | ||
| 48 | #define LCD_MONO_DSTN_8BPP ((8 << 4) | LCD_TYPE_MONO_DSTN) | ||
| 49 | #define LCD_COLOR_STN_8BPP ((8 << 4) | LCD_TYPE_COLOR_STN) | ||
| 50 | #define LCD_COLOR_DSTN_16BPP ((16 << 4) | LCD_TYPE_COLOR_DSTN) | ||
| 51 | #define LCD_COLOR_TFT_8BPP ((8 << 4) | LCD_TYPE_COLOR_TFT) | ||
| 52 | #define LCD_COLOR_TFT_16BPP ((16 << 4) | LCD_TYPE_COLOR_TFT) | ||
| 53 | #define LCD_COLOR_TFT_18BPP ((18 << 4) | LCD_TYPE_COLOR_TFT) | ||
| 54 | #define LCD_SMART_PANEL_8BPP ((8 << 4) | LCD_TYPE_SMART_PANEL) | ||
| 55 | #define LCD_SMART_PANEL_16BPP ((16 << 4) | LCD_TYPE_SMART_PANEL) | ||
| 56 | #define LCD_SMART_PANEL_18BPP ((18 << 4) | LCD_TYPE_SMART_PANEL) | ||
| 57 | |||
| 58 | #define LCD_AC_BIAS_FREQ(x) (((x) & 0xff) << 10) | ||
| 59 | #define LCD_BIAS_ACTIVE_HIGH (0 << 18) | ||
| 60 | #define LCD_BIAS_ACTIVE_LOW (1 << 18) | ||
| 61 | #define LCD_PCLK_EDGE_RISE (0 << 19) | ||
| 62 | #define LCD_PCLK_EDGE_FALL (1 << 19) | ||
| 63 | #define LCD_ALTERNATE_MAPPING (1 << 20) | ||
| 64 | |||
| 65 | /* | ||
| 66 | * This structure describes the machine which we are running on. | ||
| 67 | * It is set in linux/arch/arm/mach-pxa/machine_name.c and used in the probe routine | ||
| 68 | * of linux/drivers/video/pxafb.c | ||
| 69 | */ | ||
| 70 | struct pxafb_mode_info { | ||
| 71 | u_long pixclock; | ||
| 72 | |||
| 73 | u_short xres; | ||
| 74 | u_short yres; | ||
| 75 | |||
| 76 | u_char bpp; | ||
| 77 | u_int cmap_greyscale:1, | ||
| 78 | depth:8, | ||
| 79 | transparency:1, | ||
| 80 | unused:22; | ||
| 81 | |||
| 82 | /* Parallel Mode Timing */ | ||
| 83 | u_char hsync_len; | ||
| 84 | u_char left_margin; | ||
| 85 | u_char right_margin; | ||
| 86 | |||
| 87 | u_char vsync_len; | ||
| 88 | u_char upper_margin; | ||
| 89 | u_char lower_margin; | ||
| 90 | u_char sync; | ||
| 91 | |||
| 92 | /* Smart Panel Mode Timing - see PXA27x DM 7.4.15.0.3 for details | ||
| 93 | * Note: | ||
| 94 | * 1. all parameters in nanosecond (ns) | ||
| 95 | * 2. a0cs{rd,wr}_set_hld are controlled by the same register bits | ||
| 96 | * in pxa27x and pxa3xx, initialize them to the same value or | ||
| 97 | * the larger one will be used | ||
| 98 | * 3. same to {rd,wr}_pulse_width | ||
| 99 | * | ||
| 100 | * 4. LCD_PCLK_EDGE_{RISE,FALL} controls the L_PCLK_WR polarity | ||
| 101 | * 5. sync & FB_SYNC_HOR_HIGH_ACT controls the L_LCLK_A0 | ||
| 102 | * 6. sync & FB_SYNC_VERT_HIGH_ACT controls the L_LCLK_RD | ||
| 103 | */ | ||
| 104 | unsigned a0csrd_set_hld; /* A0 and CS Setup/Hold Time before/after L_FCLK_RD */ | ||
| 105 | unsigned a0cswr_set_hld; /* A0 and CS Setup/Hold Time before/after L_PCLK_WR */ | ||
| 106 | unsigned wr_pulse_width; /* L_PCLK_WR pulse width */ | ||
| 107 | unsigned rd_pulse_width; /* L_FCLK_RD pulse width */ | ||
| 108 | unsigned cmd_inh_time; /* Command Inhibit time between two writes */ | ||
| 109 | unsigned op_hold_time; /* Output Hold time from L_FCLK_RD negation */ | ||
| 110 | }; | ||
| 111 | |||
| 112 | struct pxafb_mach_info { | ||
| 113 | struct pxafb_mode_info *modes; | ||
| 114 | unsigned int num_modes; | ||
| 115 | |||
| 116 | unsigned int lcd_conn; | ||
| 117 | unsigned long video_mem_size; | ||
| 118 | |||
| 119 | u_int fixed_modes:1, | ||
| 120 | cmap_inverse:1, | ||
| 121 | cmap_static:1, | ||
| 122 | acceleration_enabled:1, | ||
| 123 | unused:28; | ||
| 124 | |||
| 125 | /* The following should be defined in LCCR0 | ||
| 126 | * LCCR0_Act or LCCR0_Pas Active or Passive | ||
| 127 | * LCCR0_Sngl or LCCR0_Dual Single/Dual panel | ||
| 128 | * LCCR0_Mono or LCCR0_Color Mono/Color | ||
| 129 | * LCCR0_4PixMono or LCCR0_8PixMono (in mono single mode) | ||
| 130 | * LCCR0_DMADel(Tcpu) (optional) DMA request delay | ||
| 131 | * | ||
| 132 | * The following should not be defined in LCCR0: | ||
| 133 | * LCCR0_OUM, LCCR0_BM, LCCR0_QDM, LCCR0_DIS, LCCR0_EFM | ||
| 134 | * LCCR0_IUM, LCCR0_SFM, LCCR0_LDM, LCCR0_ENB | ||
| 135 | */ | ||
| 136 | u_int lccr0; | ||
| 137 | /* The following should be defined in LCCR3 | ||
| 138 | * LCCR3_OutEnH or LCCR3_OutEnL Output enable polarity | ||
| 139 | * LCCR3_PixRsEdg or LCCR3_PixFlEdg Pixel clock edge type | ||
| 140 | * LCCR3_Acb(X) AB Bias pin frequency | ||
| 141 | * LCCR3_DPC (optional) Double Pixel Clock mode (untested) | ||
| 142 | * | ||
| 143 | * The following should not be defined in LCCR3 | ||
| 144 | * LCCR3_HSP, LCCR3_VSP, LCCR0_Pcd(x), LCCR3_Bpp | ||
| 145 | */ | ||
| 146 | u_int lccr3; | ||
| 147 | /* The following should be defined in LCCR4 | ||
| 148 | * LCCR4_PAL_FOR_0 or LCCR4_PAL_FOR_1 or LCCR4_PAL_FOR_2 | ||
| 149 | * | ||
| 150 | * All other bits in LCCR4 should be left alone. | ||
| 151 | */ | ||
| 152 | u_int lccr4; | ||
| 153 | void (*pxafb_backlight_power)(int); | ||
| 154 | void (*pxafb_lcd_power)(int, struct fb_var_screeninfo *); | ||
| 155 | void (*smart_update)(struct fb_info *); | ||
| 156 | }; | ||
| 157 | |||
| 158 | void pxa_set_fb_info(struct device *, struct pxafb_mach_info *); | ||
| 159 | unsigned long pxafb_get_hsync_time(struct device *dev); | ||
| 160 | |||
| 161 | #ifdef CONFIG_FB_PXA_SMARTPANEL | ||
| 162 | extern int pxafb_smart_queue(struct fb_info *info, uint16_t *cmds, int); | ||
| 163 | extern int pxafb_smart_flush(struct fb_info *info); | ||
| 164 | #else | ||
| 165 | static inline int pxafb_smart_queue(struct fb_info *info, | ||
| 166 | uint16_t *cmds, int n) | ||
| 167 | { | ||
| 168 | return 0; | ||
| 169 | } | ||
| 170 | |||
| 171 | static inline int pxafb_smart_flush(struct fb_info *info) | ||
| 172 | { | ||
| 173 | return 0; | ||
| 174 | } | ||
| 175 | #endif | ||
