1 files changed, 80 insertions, 0 deletions

diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index 651b18839088..b34c17f52f3e 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -246,6 +246,22 @@
  *      to identify the device, and the TESTDATA blob attribute to pass through
  *      to the driver.
  *
+ * @NL80211_CMD_CONNECT: connection request and notification; this command
+ *      requests to connect to a specified network but without separating
+ *      auth and assoc steps. For this, you need to specify the SSID in a
+ *      %NL80211_ATTR_SSID attribute, and can optionally specify the association
+ *      IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_MAC,
+ *      %NL80211_ATTR_WIPHY_FREQ and %NL80211_ATTR_CONTROL_PORT.
+ *      It is also sent as an event, with the BSSID and response IEs when the
+ *      connection is established or failed to be established. This can be
+ *      determined by the STATUS_CODE attribute.
+ * @NL80211_CMD_ROAM: request that the card roam (currently not implemented),
+ *      sent as an event when the card/driver roamed by itself.
+ * @NL80211_CMD_DISCONNECT: drop a given connection; also used to notify
+ *      userspace that a connection was dropped by the AP or due to other
+ *      reasons, for this the %NL80211_ATTR_DISCONNECTED_BY_AP and
+ *      %NL80211_ATTR_REASON_CODE attributes are used.
+ *
  * @NL80211_CMD_MAX: highest used command number
  * @__NL80211_CMD_AFTER_LAST: internal use
  */
@@ -316,6 +332,10 @@ enum nl80211_commands {
 
         NL80211_CMD_TESTMODE,
 
+        NL80211_CMD_CONNECT,
+        NL80211_CMD_ROAM,
+        NL80211_CMD_DISCONNECT,
+
         /* add new commands above here */
 
         /* used to define NL80211_CMD_MAX below */
@@ -520,6 +540,30 @@ enum nl80211_commands {
  * @NL80211_ATTR_TESTDATA: Testmode data blob, passed through to the driver.
  *      We recommend using nested, driver-specific attributes within this.
  *
+ * @NL80211_ATTR_DISCONNECTED_BY_AP: A flag indicating that the DISCONNECT
+ *      event was due to the AP disconnecting the station, and not due to
+ *      a local disconnect request.
+ * @NL80211_ATTR_STATUS_CODE: StatusCode for the %NL80211_CMD_CONNECT
+ *      event (u16)
+ * @NL80211_ATTR_PRIVACY: Flag attribute, used with connect(), indicating
+ *      that protected APs should be used.
+ *
+ * @NL80211_ATTR_CIPHERS_PAIRWISE: Used with CONNECT and ASSOCIATE to
+ *      indicate which unicast key ciphers will be used with the connection
+ *      (an array of u32).
+ * @NL80211_ATTR_CIPHER_GROUP: Used with CONNECT and ASSOCIATE to indicate
+ *      which group key cipher will be used with the connection (a u32).
+ * @NL80211_ATTR_WPA_VERSIONS: Used with CONNECT and ASSOCIATE to indicate
+ *      which WPA version(s) the AP we want to associate with is using
+ *      (a u32 with flags from &enum nl80211_wpa_versions).
+ * @NL80211_ATTR_AKM_SUITES: Used with CONNECT and ASSOCIATE to indicate
+ *      which key management algorithm(s) to use (an array of u32).
+ *
+ * @NL80211_ATTR_REQ_IE: (Re)association request information elements as
+ *      sent out by the card, for ROAM and successful CONNECT events.
+ * @NL80211_ATTR_RESP_IE: (Re)association response information elements as
+ *      sent by peer, for ROAM and successful CONNECT events.
+ *
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
  */
@@ -630,6 +674,19 @@ enum nl80211_attrs {
 
         NL80211_ATTR_TESTDATA,
 
+        NL80211_ATTR_PRIVACY,
+
+        NL80211_ATTR_DISCONNECTED_BY_AP,
+        NL80211_ATTR_STATUS_CODE,
+
+        NL80211_ATTR_CIPHER_SUITES_PAIRWISE,
+        NL80211_ATTR_CIPHER_SUITE_GROUP,
+        NL80211_ATTR_WPA_VERSIONS,
+        NL80211_ATTR_AKM_SUITES,
+
+        NL80211_ATTR_REQ_IE,
+        NL80211_ATTR_RESP_IE,
+
         /* add attributes here, update the policy in nl80211.c */
 
         __NL80211_ATTR_AFTER_LAST,
@@ -640,6 +697,7 @@ enum nl80211_attrs {
  * Allow user space programs to use #ifdef on new attributes by defining them
  * here
  */
+#define NL80211_CMD_CONNECT NL80211_CMD_CONNECT
 #define NL80211_ATTR_HT_CAPABILITY NL80211_ATTR_HT_CAPABILITY
 #define NL80211_ATTR_BSS_BASIC_RATES NL80211_ATTR_BSS_BASIC_RATES
 #define NL80211_ATTR_WIPHY_TXQ_PARAMS NL80211_ATTR_WIPHY_TXQ_PARAMS
@@ -653,6 +711,10 @@ enum nl80211_attrs {
 #define NL80211_ATTR_SSID NL80211_ATTR_SSID
 #define NL80211_ATTR_AUTH_TYPE NL80211_ATTR_AUTH_TYPE
 #define NL80211_ATTR_REASON_CODE NL80211_ATTR_REASON_CODE
+#define NL80211_ATTR_CIPHER_SUITES_PAIRWISE NL80211_ATTR_CIPHER_SUITES_PAIRWISE
+#define NL80211_ATTR_CIPHER_SUITE_GROUP NL80211_ATTR_CIPHER_SUITE_GROUP
+#define NL80211_ATTR_WPA_VERSIONS NL80211_ATTR_WPA_VERSIONS
+#define NL80211_ATTR_AKM_SUITES NL80211_ATTR_AKM_SUITES
 
 #define NL80211_MAX_SUPP_RATES                  32
 #define NL80211_MAX_SUPP_REG_RULES              32
@@ -661,6 +723,9 @@ enum nl80211_attrs {
 #define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY     24
 #define NL80211_HT_CAPABILITY_LEN               26
 
+#define NL80211_MAX_NR_CIPHER_SUITES            5
+#define NL80211_MAX_NR_AKM_SUITES               2
+
 /**
  * enum nl80211_iftype - (virtual) interface types
  *
@@ -1205,12 +1270,22 @@ enum nl80211_bss {
  * @NL80211_AUTHTYPE_SHARED_KEY: Shared Key authentication (WEP only)
  * @NL80211_AUTHTYPE_FT: Fast BSS Transition (IEEE 802.11r)
  * @NL80211_AUTHTYPE_NETWORK_EAP: Network EAP (some Cisco APs and mainly LEAP)
+ * @__NL80211_AUTHTYPE_NUM: internal
+ * @NL80211_AUTHTYPE_MAX: maximum valid auth algorithm
+ * @NL80211_AUTHTYPE_AUTOMATIC: determine automatically (if necessary by
+ *      trying multiple times); this is invalid in netlink -- leave out
+ *      the attribute for this on CONNECT commands.
  */
 enum nl80211_auth_type {
         NL80211_AUTHTYPE_OPEN_SYSTEM,
         NL80211_AUTHTYPE_SHARED_KEY,
         NL80211_AUTHTYPE_FT,
         NL80211_AUTHTYPE_NETWORK_EAP,
+
+        /* keep last */
+        __NL80211_AUTHTYPE_NUM,
+        NL80211_AUTHTYPE_MAX = __NL80211_AUTHTYPE_NUM - 1,
+        NL80211_AUTHTYPE_AUTOMATIC
 };
 
 /**
@@ -1235,4 +1310,9 @@ enum nl80211_mfp {
         NL80211_MFP_REQUIRED,
 };
 
+enum nl80211_wpa_versions {
+        NL80211_WPA_VERSION_1 = 1 << 0,
+        NL80211_WPA_VERSION_2 = 1 << 1,
+};
+
 #endif /* __LINUX_NL80211_H */