1 files changed, 33 insertions, 30 deletions

diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 601c5c703a05..460525841a27 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -113,21 +113,12 @@ extern int nand_read_raw (struct mtd_info *mtd, uint8_t *buf, loff_t from,
 /*
  * Constants for ECC_MODES
  */
-
-/* No ECC. Usage is not recommended ! */
-#define NAND_ECC_NONE           0
-/* Software ECC 3 byte ECC per 256 Byte data */
-#define NAND_ECC_SOFT           1
-/* Hardware ECC 3 byte ECC per 256 Byte data */
-#define NAND_ECC_HW3_256        2
-/* Hardware ECC 3 byte ECC per 512 Byte data */
-#define NAND_ECC_HW3_512        3
-/* Hardware ECC 3 byte ECC per 512 Byte data */
-#define NAND_ECC_HW6_512        4
-/* Hardware ECC 8 byte ECC per 512 Byte data */
-#define NAND_ECC_HW8_512        6
-/* Hardware ECC 12 byte ECC per 2048 Byte data */
-#define NAND_ECC_HW12_2048      7
+typedef enum {
+        NAND_ECC_NONE,
+        NAND_ECC_SOFT,
+        NAND_ECC_HW,
+        NAND_ECC_HW_SYNDROME,
+} nand_ecc_modes_t;
 
 /*
  * Constants for Hardware ECC
@@ -231,6 +222,31 @@ struct nand_hw_control {
 };
 
 /**
+ * struct nand_ecc_ctrl - Control structure for ecc
+ * @mode:       ecc mode
+ * @steps:      number of ecc steps per page
+ * @size:       data bytes per ecc step
+ * @bytes:      ecc bytes per step
+ * @hwctl:      function to control hardware ecc generator. Must only
+ *              be provided if an hardware ECC is available
+ * @calculate:  function for ecc calculation or readback from ecc hardware
+ * @correct:    function for ecc correction, matching to ecc generator (sw/hw)
+ */
+struct nand_ecc_ctrl {
+        nand_ecc_modes_t        mode;
+        int                     steps;
+        int                     size;
+        int                     bytes;
+        int                     (*hwctl)(struct mtd_info *mtd, int mode);
+        int                     (*calculate)(struct mtd_info *mtd,
+                                             const uint8_t *dat,
+                                             uint8_t *ecc_code);
+        int                     (*correct)(struct mtd_info *mtd, uint8_t *dat,
+                                           uint8_t *read_ecc,
+                                           uint8_t *calc_ecc);
+};
+
+/**
  * struct nand_chip - NAND Private Flash Chip Data
  * @IO_ADDR_R:          [BOARDSPECIFIC] address to read the 8 I/O lines of the flash device
  * @IO_ADDR_W:          [BOARDSPECIFIC] address to write the 8 I/O lines of the flash device
@@ -250,16 +266,9 @@ struct nand_hw_control {
  *                      is read from the chip status register
  * @cmdfunc:            [REPLACEABLE] hardwarespecific function for writing commands to the chip
  * @waitfunc:           [REPLACEABLE] hardwarespecific function for wait on ready
- * @calculate_ecc:      [REPLACEABLE] function for ecc calculation or readback from ecc hardware
- * @correct_data:       [REPLACEABLE] function for ecc correction, matching to ecc generator (sw/hw)
- * @enable_hwecc:       [BOARDSPECIFIC] function to enable (reset) hardware ecc generator. Must only
- *                      be provided if a hardware ECC is available
+ * @ecc:                [BOARDSPECIFIC] ecc control ctructure
  * @erase_cmd:          [INTERN] erase command write function, selectable due to AND support
  * @scan_bbt:           [REPLACEABLE] function to scan bad block table
- * @eccmode:            [BOARDSPECIFIC] mode of ecc, see defines
- * @eccsize:            [INTERN] databytes used per ecc-calculation
- * @eccbytes:           [INTERN] number of ecc bytes per ecc-calculation step
- * @eccsteps:           [INTERN] number of ecc calculation steps per page
  * @chip_delay:         [BOARDSPECIFIC] chip dependent delay for transfering data from array to read regs (tR)
  * @wq:                 [INTERN] wait queue to sleep on if a NAND operation is in progress
  * @state:              [INTERN] the current state of the NAND device
@@ -309,15 +318,9 @@ struct nand_chip {
         int             (*dev_ready)(struct mtd_info *mtd);
         void            (*cmdfunc)(struct mtd_info *mtd, unsigned command, int column, int page_addr);
         int             (*waitfunc)(struct mtd_info *mtd, struct nand_chip *this, int state);
-        int             (*calculate_ecc)(struct mtd_info *mtd, const uint8_t *dat, uint8_t *ecc_code);
-        int             (*correct_data)(struct mtd_info *mtd, uint8_t *dat, uint8_t *read_ecc, uint8_t *calc_ecc);
-        void            (*enable_hwecc)(struct mtd_info *mtd, int mode);
         void            (*erase_cmd)(struct mtd_info *mtd, int page);
         int             (*scan_bbt)(struct mtd_info *mtd);
-        int             eccmode;
-        int             eccsize;
-        int             eccbytes;
-        int             eccsteps;
+        struct nand_ecc_ctrl ecc;
         int             chip_delay;
         wait_queue_head_t wq;
         nand_state_t    state;