1 files changed, 97 insertions, 0 deletions

diff --git a/include/linux/mfd/wm8994/pdata.h b/include/linux/mfd/wm8994/pdata.h
new file mode 100644
index 000000000000..70d6a8687dc5
--- /dev/null
+++ b/include/linux/mfd/wm8994/pdata.h
@@ -0,0 +1,97 @@
+/*
+ * include/linux/mfd/wm8994/pdata.h -- Platform data for WM8994
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#ifndef __MFD_WM8994_PDATA_H__
+#define __MFD_WM8994_PDATA_H__
+
+#define WM8994_NUM_LDO   2
+#define WM8994_NUM_GPIO 11
+
+struct wm8994_ldo_pdata {
+        /** GPIOs to enable regulator, 0 or less if not available */
+        int enable;
+
+        const char *supply;
+        struct regulator_init_data *init_data;
+};
+
+#define WM8994_CONFIGURE_GPIO 0x8000
+
+#define WM8994_DRC_REGS 5
+#define WM8994_EQ_REGS  19
+
+/**
+ * DRC configurations are specified with a label and a set of register
+ * values to write (the enable bits will be ignored).  At runtime an
+ * enumerated control will be presented for each DRC block allowing
+ * the user to choose the configration to use.
+ *
+ * Configurations may be generated by hand or by using the DRC control
+ * panel provided by the WISCE - see  http://www.wolfsonmicro.com/wisce/
+ * for details.
+ */
+struct wm8994_drc_cfg {
+        const char *name;
+        u16 regs[WM8994_DRC_REGS];
+};
+
+/**
+ * ReTune Mobile configurations are specified with a label, sample
+ * rate and set of values to write (the enable bits will be ignored).
+ *
+ * Configurations are expected to be generated using the ReTune Mobile
+ * control panel in WISCE - see http://www.wolfsonmicro.com/wisce/
+ */
+struct wm8994_retune_mobile_cfg {
+        const char *name;
+        unsigned int rate;
+        u16 regs[WM8994_EQ_REGS];
+};
+
+struct wm8994_pdata {
+        int gpio_base;
+
+        /**
+         * Default values for GPIOs if non-zero, WM8994_CONFIGURE_GPIO
+         * can be used for all zero values.
+         */
+        int gpio_defaults[WM8994_NUM_GPIO];
+
+        struct wm8994_ldo_pdata ldo[WM8994_NUM_LDO];
+
+
+        int num_drc_cfgs;
+        struct wm8994_drc_cfg *drc_cfgs;
+
+        int num_retune_mobile_cfgs;
+        struct wm8994_retune_mobile_cfg *retune_mobile_cfgs;
+
+        /* LINEOUT can be differential or single ended */
+        unsigned int lineout1_diff:1;
+        unsigned int lineout2_diff:1;
+
+        /* Common mode feedback */
+        unsigned int lineout1fb:1;
+        unsigned int lineout2fb:1;
+
+        /* Microphone biases: 0=0.9*AVDD1 1=0.65*AVVD1 */
+        unsigned int micbias1_lvl:1;
+        unsigned int micbias2_lvl:1;
+
+        /* Jack detect threashold levels, see datasheet for values */
+        unsigned int jd_scthr:2;
+        unsigned int jd_thr:2;
+};
+
+#endif