aboutsummaryrefslogtreecommitdiffstats
path: root/include/asm-m68k/dvma.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/asm-m68k/dvma.h')
-rw-r--r--include/asm-m68k/dvma.h240
1 files changed, 0 insertions, 240 deletions
diff --git a/include/asm-m68k/dvma.h b/include/asm-m68k/dvma.h
deleted file mode 100644
index 890bbf7e7758..000000000000
--- a/include/asm-m68k/dvma.h
+++ /dev/null
@@ -1,240 +0,0 @@
1/*
2 * include/asm-m68k/dma.h
3 *
4 * Copyright 1995 (C) David S. Miller (davem@caip.rutgers.edu)
5 *
6 * Hacked to fit Sun3x needs by Thomas Bogendoerfer
7 */
8
9#ifndef __M68K_DVMA_H
10#define __M68K_DVMA_H
11
12
13#define DVMA_PAGE_SHIFT 13
14#define DVMA_PAGE_SIZE (1UL << DVMA_PAGE_SHIFT)
15#define DVMA_PAGE_MASK (~(DVMA_PAGE_SIZE-1))
16#define DVMA_PAGE_ALIGN(addr) ALIGN(addr, DVMA_PAGE_SIZE)
17
18extern void dvma_init(void);
19extern int dvma_map_iommu(unsigned long kaddr, unsigned long baddr,
20 int len);
21
22#define dvma_malloc(x) dvma_malloc_align(x, 0)
23#define dvma_map(x, y) dvma_map_align(x, y, 0)
24#define dvma_map_vme(x, y) (dvma_map(x, y) & 0xfffff)
25#define dvma_map_align_vme(x, y, z) (dvma_map_align (x, y, z) & 0xfffff)
26extern unsigned long dvma_map_align(unsigned long kaddr, int len,
27 int align);
28extern void *dvma_malloc_align(unsigned long len, unsigned long align);
29
30extern void dvma_unmap(void *baddr);
31extern void dvma_free(void *vaddr);
32
33
34#ifdef CONFIG_SUN3
35/* sun3 dvma page support */
36
37/* memory and pmegs potentially reserved for dvma */
38#define DVMA_PMEG_START 10
39#define DVMA_PMEG_END 16
40#define DVMA_START 0xf00000
41#define DVMA_END 0xfe0000
42#define DVMA_SIZE (DVMA_END-DVMA_START)
43#define IOMMU_TOTAL_ENTRIES 128
44#define IOMMU_ENTRIES 120
45
46/* empirical kludge -- dvma regions only seem to work right on 0x10000
47 byte boundaries */
48#define DVMA_REGION_SIZE 0x10000
49#define DVMA_ALIGN(addr) (((addr)+DVMA_REGION_SIZE-1) & \
50 ~(DVMA_REGION_SIZE-1))
51
52/* virt <-> phys conversions */
53#define dvma_vtop(x) ((unsigned long)(x) & 0xffffff)
54#define dvma_ptov(x) ((unsigned long)(x) | 0xf000000)
55#define dvma_vtovme(x) ((unsigned long)(x) & 0x00fffff)
56#define dvma_vmetov(x) ((unsigned long)(x) | 0xff00000)
57#define dvma_vtob(x) dvma_vtop(x)
58#define dvma_btov(x) dvma_ptov(x)
59
60static inline int dvma_map_cpu(unsigned long kaddr, unsigned long vaddr,
61 int len)
62{
63 return 0;
64}
65
66#else /* Sun3x */
67
68/* sun3x dvma page support */
69
70#define DVMA_START 0x0
71#define DVMA_END 0xf00000
72#define DVMA_SIZE (DVMA_END-DVMA_START)
73#define IOMMU_TOTAL_ENTRIES 2048
74/* the prom takes the top meg */
75#define IOMMU_ENTRIES (IOMMU_TOTAL_ENTRIES - 0x80)
76
77#define dvma_vtob(x) ((unsigned long)(x) & 0x00ffffff)
78#define dvma_btov(x) ((unsigned long)(x) | 0xff000000)
79
80extern int dvma_map_cpu(unsigned long kaddr, unsigned long vaddr, int len);
81
82
83
84/* everything below this line is specific to dma used for the onboard
85 ESP scsi on sun3x */
86
87/* Structure to describe the current status of DMA registers on the Sparc */
88struct sparc_dma_registers {
89 __volatile__ unsigned long cond_reg; /* DMA condition register */
90 __volatile__ unsigned long st_addr; /* Start address of this transfer */
91 __volatile__ unsigned long cnt; /* How many bytes to transfer */
92 __volatile__ unsigned long dma_test; /* DMA test register */
93};
94
95/* DVMA chip revisions */
96enum dvma_rev {
97 dvmarev0,
98 dvmaesc1,
99 dvmarev1,
100 dvmarev2,
101 dvmarev3,
102 dvmarevplus,
103 dvmahme
104};
105
106#define DMA_HASCOUNT(rev) ((rev)==dvmaesc1)
107
108/* Linux DMA information structure, filled during probe. */
109struct Linux_SBus_DMA {
110 struct Linux_SBus_DMA *next;
111 struct linux_sbus_device *SBus_dev;
112 struct sparc_dma_registers *regs;
113
114 /* Status, misc info */
115 int node; /* Prom node for this DMA device */
116 int running; /* Are we doing DMA now? */
117 int allocated; /* Are we "owned" by anyone yet? */
118
119 /* Transfer information. */
120 unsigned long addr; /* Start address of current transfer */
121 int nbytes; /* Size of current transfer */
122 int realbytes; /* For splitting up large transfers, etc. */
123
124 /* DMA revision */
125 enum dvma_rev revision;
126};
127
128extern struct Linux_SBus_DMA *dma_chain;
129
130/* Broken hardware... */
131#define DMA_ISBROKEN(dma) ((dma)->revision == dvmarev1)
132#define DMA_ISESC1(dma) ((dma)->revision == dvmaesc1)
133
134/* Fields in the cond_reg register */
135/* First, the version identification bits */
136#define DMA_DEVICE_ID 0xf0000000 /* Device identification bits */
137#define DMA_VERS0 0x00000000 /* Sunray DMA version */
138#define DMA_ESCV1 0x40000000 /* DMA ESC Version 1 */
139#define DMA_VERS1 0x80000000 /* DMA rev 1 */
140#define DMA_VERS2 0xa0000000 /* DMA rev 2 */
141#define DMA_VERHME 0xb0000000 /* DMA hme gate array */
142#define DMA_VERSPLUS 0x90000000 /* DMA rev 1 PLUS */
143
144#define DMA_HNDL_INTR 0x00000001 /* An IRQ needs to be handled */
145#define DMA_HNDL_ERROR 0x00000002 /* We need to take an error */
146#define DMA_FIFO_ISDRAIN 0x0000000c /* The DMA FIFO is draining */
147#define DMA_INT_ENAB 0x00000010 /* Turn on interrupts */
148#define DMA_FIFO_INV 0x00000020 /* Invalidate the FIFO */
149#define DMA_ACC_SZ_ERR 0x00000040 /* The access size was bad */
150#define DMA_FIFO_STDRAIN 0x00000040 /* DMA_VERS1 Drain the FIFO */
151#define DMA_RST_SCSI 0x00000080 /* Reset the SCSI controller */
152#define DMA_RST_ENET DMA_RST_SCSI /* Reset the ENET controller */
153#define DMA_ST_WRITE 0x00000100 /* write from device to memory */
154#define DMA_ENABLE 0x00000200 /* Fire up DMA, handle requests */
155#define DMA_PEND_READ 0x00000400 /* DMA_VERS1/0/PLUS Pending Read */
156#define DMA_ESC_BURST 0x00000800 /* 1=16byte 0=32byte */
157#define DMA_READ_AHEAD 0x00001800 /* DMA read ahead partial longword */
158#define DMA_DSBL_RD_DRN 0x00001000 /* No EC drain on slave reads */
159#define DMA_BCNT_ENAB 0x00002000 /* If on, use the byte counter */
160#define DMA_TERM_CNTR 0x00004000 /* Terminal counter */
161#define DMA_CSR_DISAB 0x00010000 /* No FIFO drains during csr */
162#define DMA_SCSI_DISAB 0x00020000 /* No FIFO drains during reg */
163#define DMA_DSBL_WR_INV 0x00020000 /* No EC inval. on slave writes */
164#define DMA_ADD_ENABLE 0x00040000 /* Special ESC DVMA optimization */
165#define DMA_E_BURST8 0x00040000 /* ENET: SBUS r/w burst size */
166#define DMA_BRST_SZ 0x000c0000 /* SCSI: SBUS r/w burst size */
167#define DMA_BRST64 0x00080000 /* SCSI: 64byte bursts (HME on UltraSparc only) */
168#define DMA_BRST32 0x00040000 /* SCSI: 32byte bursts */
169#define DMA_BRST16 0x00000000 /* SCSI: 16byte bursts */
170#define DMA_BRST0 0x00080000 /* SCSI: no bursts (non-HME gate arrays) */
171#define DMA_ADDR_DISAB 0x00100000 /* No FIFO drains during addr */
172#define DMA_2CLKS 0x00200000 /* Each transfer = 2 clock ticks */
173#define DMA_3CLKS 0x00400000 /* Each transfer = 3 clock ticks */
174#define DMA_EN_ENETAUI DMA_3CLKS /* Put lance into AUI-cable mode */
175#define DMA_CNTR_DISAB 0x00800000 /* No IRQ when DMA_TERM_CNTR set */
176#define DMA_AUTO_NADDR 0x01000000 /* Use "auto nxt addr" feature */
177#define DMA_SCSI_ON 0x02000000 /* Enable SCSI dma */
178#define DMA_PARITY_OFF 0x02000000 /* HME: disable parity checking */
179#define DMA_LOADED_ADDR 0x04000000 /* Address has been loaded */
180#define DMA_LOADED_NADDR 0x08000000 /* Next address has been loaded */
181
182/* Values describing the burst-size property from the PROM */
183#define DMA_BURST1 0x01
184#define DMA_BURST2 0x02
185#define DMA_BURST4 0x04
186#define DMA_BURST8 0x08
187#define DMA_BURST16 0x10
188#define DMA_BURST32 0x20
189#define DMA_BURST64 0x40
190#define DMA_BURSTBITS 0x7f
191
192/* Determine highest possible final transfer address given a base */
193#define DMA_MAXEND(addr) (0x01000000UL-(((unsigned long)(addr))&0x00ffffffUL))
194
195/* Yes, I hack a lot of elisp in my spare time... */
196#define DMA_ERROR_P(regs) ((((regs)->cond_reg) & DMA_HNDL_ERROR))
197#define DMA_IRQ_P(regs) ((((regs)->cond_reg) & (DMA_HNDL_INTR | DMA_HNDL_ERROR)))
198#define DMA_WRITE_P(regs) ((((regs)->cond_reg) & DMA_ST_WRITE))
199#define DMA_OFF(regs) ((((regs)->cond_reg) &= (~DMA_ENABLE)))
200#define DMA_INTSOFF(regs) ((((regs)->cond_reg) &= (~DMA_INT_ENAB)))
201#define DMA_INTSON(regs) ((((regs)->cond_reg) |= (DMA_INT_ENAB)))
202#define DMA_PUNTFIFO(regs) ((((regs)->cond_reg) |= DMA_FIFO_INV))
203#define DMA_SETSTART(regs, addr) ((((regs)->st_addr) = (char *) addr))
204#define DMA_BEGINDMA_W(regs) \
205 ((((regs)->cond_reg |= (DMA_ST_WRITE|DMA_ENABLE|DMA_INT_ENAB))))
206#define DMA_BEGINDMA_R(regs) \
207 ((((regs)->cond_reg |= ((DMA_ENABLE|DMA_INT_ENAB)&(~DMA_ST_WRITE)))))
208
209/* For certain DMA chips, we need to disable ints upon irq entry
210 * and turn them back on when we are done. So in any ESP interrupt
211 * handler you *must* call DMA_IRQ_ENTRY upon entry and DMA_IRQ_EXIT
212 * when leaving the handler. You have been warned...
213 */
214#define DMA_IRQ_ENTRY(dma, dregs) do { \
215 if(DMA_ISBROKEN(dma)) DMA_INTSOFF(dregs); \
216 } while (0)
217
218#define DMA_IRQ_EXIT(dma, dregs) do { \
219 if(DMA_ISBROKEN(dma)) DMA_INTSON(dregs); \
220 } while(0)
221
222/* Reset the friggin' thing... */
223#define DMA_RESET(dma) do { \
224 struct sparc_dma_registers *regs = dma->regs; \
225 /* Let the current FIFO drain itself */ \
226 sparc_dma_pause(regs, (DMA_FIFO_ISDRAIN)); \
227 /* Reset the logic */ \
228 regs->cond_reg |= (DMA_RST_SCSI); /* assert */ \
229 __delay(400); /* let the bits set ;) */ \
230 regs->cond_reg &= ~(DMA_RST_SCSI); /* de-assert */ \
231 sparc_dma_enable_interrupts(regs); /* Re-enable interrupts */ \
232 /* Enable FAST transfers if available */ \
233 if(dma->revision>dvmarev1) regs->cond_reg |= DMA_3CLKS; \
234 dma->running = 0; \
235} while(0)
236
237
238#endif /* !CONFIG_SUN3 */
239
240#endif /* !(__M68K_DVMA_H) */