aboutsummaryrefslogtreecommitdiffstats
path: root/include/asm-arm/arch-s3c2410
diff options
context:
space:
mode:
Diffstat (limited to 'include/asm-arm/arch-s3c2410')
-rw-r--r--include/asm-arm/arch-s3c2410/anubis-cpld.h25
-rw-r--r--include/asm-arm/arch-s3c2410/anubis-irq.h21
-rw-r--r--include/asm-arm/arch-s3c2410/anubis-map.h38
-rw-r--r--include/asm-arm/arch-s3c2410/audio.h45
-rw-r--r--include/asm-arm/arch-s3c2410/bast-cpld.h53
-rw-r--r--include/asm-arm/arch-s3c2410/bast-irq.h29
-rw-r--r--include/asm-arm/arch-s3c2410/bast-map.h146
-rw-r--r--include/asm-arm/arch-s3c2410/bast-pmu.h40
-rw-r--r--include/asm-arm/arch-s3c2410/debug-macro.S102
-rw-r--r--include/asm-arm/arch-s3c2410/dma.h453
-rw-r--r--include/asm-arm/arch-s3c2410/entry-macro.S78
-rw-r--r--include/asm-arm/arch-s3c2410/fb.h74
-rw-r--r--include/asm-arm/arch-s3c2410/gpio.h18
-rw-r--r--include/asm-arm/arch-s3c2410/h1940-latch.h64
-rw-r--r--include/asm-arm/arch-s3c2410/h1940.h21
-rw-r--r--include/asm-arm/arch-s3c2410/hardware.h137
-rw-r--r--include/asm-arm/arch-s3c2410/idle.h24
-rw-r--r--include/asm-arm/arch-s3c2410/io.h218
-rw-r--r--include/asm-arm/arch-s3c2410/irqs.h166
-rw-r--r--include/asm-arm/arch-s3c2410/leds-gpio.h28
-rw-r--r--include/asm-arm/arch-s3c2410/map.h178
-rw-r--r--include/asm-arm/arch-s3c2410/memory.h19
-rw-r--r--include/asm-arm/arch-s3c2410/osiris-cpld.h30
-rw-r--r--include/asm-arm/arch-s3c2410/osiris-map.h42
-rw-r--r--include/asm-arm/arch-s3c2410/otom-map.h30
-rw-r--r--include/asm-arm/arch-s3c2410/regs-clock.h197
-rw-r--r--include/asm-arm/arch-s3c2410/regs-dsc.h184
-rw-r--r--include/asm-arm/arch-s3c2410/regs-gpio.h1163
-rw-r--r--include/asm-arm/arch-s3c2410/regs-gpioj.h106
-rw-r--r--include/asm-arm/arch-s3c2410/regs-irq.h43
-rw-r--r--include/asm-arm/arch-s3c2410/regs-lcd.h162
-rw-r--r--include/asm-arm/arch-s3c2410/regs-mem.h220
-rw-r--r--include/asm-arm/arch-s3c2410/regs-power.h40
-rw-r--r--include/asm-arm/arch-s3c2410/regs-s3c2412-mem.h29
-rw-r--r--include/asm-arm/arch-s3c2410/regs-s3c2412.h23
-rw-r--r--include/asm-arm/arch-s3c2410/regs-s3c2443-clock.h195
-rw-r--r--include/asm-arm/arch-s3c2410/regs-sdi.h127
-rw-r--r--include/asm-arm/arch-s3c2410/reset.h22
-rw-r--r--include/asm-arm/arch-s3c2410/spi-gpio.h27
-rw-r--r--include/asm-arm/arch-s3c2410/spi.h25
-rw-r--r--include/asm-arm/arch-s3c2410/system-reset.h64
-rw-r--r--include/asm-arm/arch-s3c2410/system.h58
-rw-r--r--include/asm-arm/arch-s3c2410/timex.h26
-rw-r--r--include/asm-arm/arch-s3c2410/uncompress.h52
-rw-r--r--include/asm-arm/arch-s3c2410/usb-control.h41
-rw-r--r--include/asm-arm/arch-s3c2410/vmalloc.h20
-rw-r--r--include/asm-arm/arch-s3c2410/vr1000-cpld.h18
-rw-r--r--include/asm-arm/arch-s3c2410/vr1000-irq.h26
-rw-r--r--include/asm-arm/arch-s3c2410/vr1000-map.h110
49 files changed, 0 insertions, 5057 deletions
diff --git a/include/asm-arm/arch-s3c2410/anubis-cpld.h b/include/asm-arm/arch-s3c2410/anubis-cpld.h
deleted file mode 100644
index 168b93fee529..000000000000
--- a/include/asm-arm/arch-s3c2410/anubis-cpld.h
+++ /dev/null
@@ -1,25 +0,0 @@
1/* linux/include/asm-arm/arch-s3c2410/anubis-cpld.h
2 *
3 * Copyright (c) 2005 Simtec Electronics
4 * http://www.simtec.co.uk/products/
5 * Ben Dooks <ben@simtec.co.uk>
6 *
7 * ANUBIS - CPLD control constants
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
12*/
13
14#ifndef __ASM_ARCH_ANUBISCPLD_H
15#define __ASM_ARCH_ANUBISCPLD_H
16
17/* CTRL2 - NAND WP control, IDE Reset assert/check */
18
19#define ANUBIS_CTRL1_NANDSEL (0x3)
20
21/* IDREG - revision */
22
23#define ANUBIS_IDREG_REVMASK (0x7)
24
25#endif /* __ASM_ARCH_ANUBISCPLD_H */
diff --git a/include/asm-arm/arch-s3c2410/anubis-irq.h b/include/asm-arm/arch-s3c2410/anubis-irq.h
deleted file mode 100644
index cd77a70d45c0..000000000000
--- a/include/asm-arm/arch-s3c2410/anubis-irq.h
+++ /dev/null
@@ -1,21 +0,0 @@
1/* linux/include/asm-arm/arch-s3c2410/anubis-irq.h
2 *
3 * Copyright (c) 2005 Simtec Electronics
4 * http://www.simtec.co.uk/products/
5 * Ben Dooks <ben@simtec.co.uk>
6 *
7 * ANUBIS - IRQ Number definitions
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
12*/
13
14#ifndef __ASM_ARCH_ANUBISIRQ_H
15#define __ASM_ARCH_ANUBISIRQ_H
16
17#define IRQ_IDE0 IRQ_EINT2
18#define IRQ_IDE1 IRQ_EINT3
19#define IRQ_ASIX IRQ_EINT1
20
21#endif /* __ASM_ARCH_ANUBISIRQ_H */
diff --git a/include/asm-arm/arch-s3c2410/anubis-map.h b/include/asm-arm/arch-s3c2410/anubis-map.h
deleted file mode 100644
index 830d114261da..000000000000
--- a/include/asm-arm/arch-s3c2410/anubis-map.h
+++ /dev/null
@@ -1,38 +0,0 @@
1/* linux/include/asm-arm/arch-s3c2410/anubis-map.h
2 *
3 * Copyright (c) 2005 Simtec Electronics
4 * http://www.simtec.co.uk/products/
5 * Ben Dooks <ben@simtec.co.uk>
6 *
7 * ANUBIS - Memory map definitions
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
12*/
13
14/* needs arch/map.h including with this */
15
16#ifndef __ASM_ARCH_ANUBISMAP_H
17#define __ASM_ARCH_ANUBISMAP_H
18
19/* start peripherals off after the S3C2410 */
20
21#define ANUBIS_IOADDR(x) (S3C2410_ADDR((x) + 0x01800000))
22
23#define ANUBIS_PA_CPLD (S3C2410_CS1 | (1<<26))
24
25/* we put the CPLD registers next, to get them out of the way */
26
27#define ANUBIS_VA_CTRL1 ANUBIS_IOADDR(0x00000000) /* 0x01800000 */
28#define ANUBIS_PA_CTRL1 (ANUBIS_PA_CPLD)
29
30#define ANUBIS_VA_IDREG ANUBIS_IOADDR(0x00300000) /* 0x01B00000 */
31#define ANUBIS_PA_IDREG (ANUBIS_PA_CPLD + (3<<23))
32
33#define ANUBIS_IDEPRI ANUBIS_IOADDR(0x01000000)
34#define ANUBIS_IDEPRIAUX ANUBIS_IOADDR(0x01100000)
35#define ANUBIS_IDESEC ANUBIS_IOADDR(0x01200000)
36#define ANUBIS_IDESECAUX ANUBIS_IOADDR(0x01300000)
37
38#endif /* __ASM_ARCH_ANUBISMAP_H */
diff --git a/include/asm-arm/arch-s3c2410/audio.h b/include/asm-arm/arch-s3c2410/audio.h
deleted file mode 100644
index 0a6977fb5770..000000000000
--- a/include/asm-arm/arch-s3c2410/audio.h
+++ /dev/null
@@ -1,45 +0,0 @@
1/* linux/include/asm-arm/arch-s3c2410/audio.h
2 *
3 * Copyright (c) 2004-2005 Simtec Electronics
4 * http://www.simtec.co.uk/products/SWLINUX/
5 * Ben Dooks <ben@simtec.co.uk>
6 *
7 * S3C24XX - Audio platfrom_device info
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
12*/
13
14#ifndef __ASM_ARCH_AUDIO_H
15#define __ASM_ARCH_AUDIO_H __FILE__
16
17/* struct s3c24xx_iis_ops
18 *
19 * called from the s3c24xx audio core to deal with the architecture
20 * or the codec's setup and control.
21 *
22 * the pointer to itself is passed through in case the caller wants to
23 * embed this in an larger structure for easy reference to it's context.
24*/
25
26struct s3c24xx_iis_ops {
27 struct module *owner;
28
29 int (*startup)(struct s3c24xx_iis_ops *me);
30 void (*shutdown)(struct s3c24xx_iis_ops *me);
31 int (*suspend)(struct s3c24xx_iis_ops *me);
32 int (*resume)(struct s3c24xx_iis_ops *me);
33
34 int (*open)(struct s3c24xx_iis_ops *me, struct snd_pcm_substream *strm);
35 int (*close)(struct s3c24xx_iis_ops *me, struct snd_pcm_substream *strm);
36 int (*prepare)(struct s3c24xx_iis_ops *me, struct snd_pcm_substream *strm, struct snd_pcm_runtime *rt);
37};
38
39struct s3c24xx_platdata_iis {
40 const char *codec_clk;
41 struct s3c24xx_iis_ops *ops;
42 int (*match_dev)(struct device *dev);
43};
44
45#endif /* __ASM_ARCH_AUDIO_H */
diff --git a/include/asm-arm/arch-s3c2410/bast-cpld.h b/include/asm-arm/arch-s3c2410/bast-cpld.h
deleted file mode 100644
index 034d2c5a47c4..000000000000
--- a/include/asm-arm/arch-s3c2410/bast-cpld.h
+++ /dev/null
@@ -1,53 +0,0 @@
1/* linux/include/asm-arm/arch-s3c2410/bast-cpld.h
2 *
3 * Copyright (c) 2003,2004 Simtec Electronics
4 * Ben Dooks <ben@simtec.co.uk>
5 *
6 * BAST - CPLD control constants
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
11*/
12
13#ifndef __ASM_ARCH_BASTCPLD_H
14#define __ASM_ARCH_BASTCPLD_H
15
16/* CTRL1 - Audio LR routing */
17
18#define BAST_CPLD_CTRL1_LRCOFF (0x00)
19#define BAST_CPLD_CTRL1_LRCADC (0x01)
20#define BAST_CPLD_CTRL1_LRCDAC (0x02)
21#define BAST_CPLD_CTRL1_LRCARM (0x03)
22#define BAST_CPLD_CTRL1_LRMASK (0x03)
23
24/* CTRL2 - NAND WP control, IDE Reset assert/check */
25
26#define BAST_CPLD_CTRL2_WNAND (0x04)
27#define BAST_CPLD_CTLR2_IDERST (0x08)
28
29/* CTRL3 - rom write control, CPLD identity */
30
31#define BAST_CPLD_CTRL3_IDMASK (0x0e)
32#define BAST_CPLD_CTRL3_ROMWEN (0x01)
33
34/* CTRL4 - 8bit LCD interface control/status */
35
36#define BAST_CPLD_CTRL4_LLAT (0x01)
37#define BAST_CPLD_CTRL4_LCDRW (0x02)
38#define BAST_CPLD_CTRL4_LCDCMD (0x04)
39#define BAST_CPLD_CTRL4_LCDE2 (0x01)
40
41/* CTRL5 - DMA routing */
42
43#define BAST_CPLD_DMA0_PRIIDE (0<<0)
44#define BAST_CPLD_DMA0_SECIDE (1<<0)
45#define BAST_CPLD_DMA0_ISA15 (2<<0)
46#define BAST_CPLD_DMA0_ISA36 (3<<0)
47
48#define BAST_CPLD_DMA1_PRIIDE (0<<2)
49#define BAST_CPLD_DMA1_SECIDE (1<<2)
50#define BAST_CPLD_DMA1_ISA15 (2<<2)
51#define BAST_CPLD_DMA1_ISA36 (3<<2)
52
53#endif /* __ASM_ARCH_BASTCPLD_H */
diff --git a/include/asm-arm/arch-s3c2410/bast-irq.h b/include/asm-arm/arch-s3c2410/bast-irq.h
deleted file mode 100644
index 726c0466f85a..000000000000
--- a/include/asm-arm/arch-s3c2410/bast-irq.h
+++ /dev/null
@@ -1,29 +0,0 @@
1/* linux/include/asm-arm/arch-s3c2410/bast-irq.h
2 *
3 * Copyright (c) 2003,2004 Simtec Electronics
4 * Ben Dooks <ben@simtec.co.uk>
5 *
6 * Machine BAST - IRQ Number definitions
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
11*/
12
13#ifndef __ASM_ARCH_BASTIRQ_H
14#define __ASM_ARCH_BASTIRQ_H
15
16/* irq numbers to onboard peripherals */
17
18#define IRQ_USBOC IRQ_EINT18
19#define IRQ_IDE0 IRQ_EINT16
20#define IRQ_IDE1 IRQ_EINT17
21#define IRQ_PCSERIAL1 IRQ_EINT15
22#define IRQ_PCSERIAL2 IRQ_EINT14
23#define IRQ_PCPARALLEL IRQ_EINT13
24#define IRQ_ASIX IRQ_EINT11
25#define IRQ_DM9000 IRQ_EINT10
26#define IRQ_ISA IRQ_EINT9
27#define IRQ_SMALERT IRQ_EINT8
28
29#endif /* __ASM_ARCH_BASTIRQ_H */
diff --git a/include/asm-arm/arch-s3c2410/bast-map.h b/include/asm-arm/arch-s3c2410/bast-map.h
deleted file mode 100644
index 86ac1c108db8..000000000000
--- a/include/asm-arm/arch-s3c2410/bast-map.h
+++ /dev/null
@@ -1,146 +0,0 @@
1/* linux/include/asm-arm/arch-s3c2410/bast-map.h
2 *
3 * Copyright (c) 2003,2004 Simtec Electronics
4 * Ben Dooks <ben@simtec.co.uk>
5 *
6 * Machine BAST - Memory map definitions
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
11*/
12
13/* needs arch/map.h including with this */
14
15/* ok, we've used up to 0x13000000, now we need to find space for the
16 * peripherals that live in the nGCS[x] areas, which are quite numerous
17 * in their space. We also have the board's CPLD to find register space
18 * for.
19 */
20
21#ifndef __ASM_ARCH_BASTMAP_H
22#define __ASM_ARCH_BASTMAP_H
23
24#define BAST_IOADDR(x) (S3C2410_ADDR((x) + 0x01300000))
25
26/* we put the CPLD registers next, to get them out of the way */
27
28#define BAST_VA_CTRL1 BAST_IOADDR(0x00000000) /* 0x01300000 */
29#define BAST_PA_CTRL1 (S3C2410_CS5 | 0x7800000)
30
31#define BAST_VA_CTRL2 BAST_IOADDR(0x00100000) /* 0x01400000 */
32#define BAST_PA_CTRL2 (S3C2410_CS1 | 0x6000000)
33
34#define BAST_VA_CTRL3 BAST_IOADDR(0x00200000) /* 0x01500000 */
35#define BAST_PA_CTRL3 (S3C2410_CS1 | 0x6800000)
36
37#define BAST_VA_CTRL4 BAST_IOADDR(0x00300000) /* 0x01600000 */
38#define BAST_PA_CTRL4 (S3C2410_CS1 | 0x7000000)
39
40/* next, we have the PC104 ISA interrupt registers */
41
42#define BAST_PA_PC104_IRQREQ (S3C2410_CS5 | 0x6000000) /* 0x01700000 */
43#define BAST_VA_PC104_IRQREQ BAST_IOADDR(0x00400000)
44
45#define BAST_PA_PC104_IRQRAW (S3C2410_CS5 | 0x6800000) /* 0x01800000 */
46#define BAST_VA_PC104_IRQRAW BAST_IOADDR(0x00500000)
47
48#define BAST_PA_PC104_IRQMASK (S3C2410_CS5 | 0x7000000) /* 0x01900000 */
49#define BAST_VA_PC104_IRQMASK BAST_IOADDR(0x00600000)
50
51#define BAST_PA_LCD_RCMD1 (0x8800000)
52#define BAST_VA_LCD_RCMD1 BAST_IOADDR(0x00700000)
53
54#define BAST_PA_LCD_WCMD1 (0x8000000)
55#define BAST_VA_LCD_WCMD1 BAST_IOADDR(0x00800000)
56
57#define BAST_PA_LCD_RDATA1 (0x9800000)
58#define BAST_VA_LCD_RDATA1 BAST_IOADDR(0x00900000)
59
60#define BAST_PA_LCD_WDATA1 (0x9000000)
61#define BAST_VA_LCD_WDATA1 BAST_IOADDR(0x00A00000)
62
63#define BAST_PA_LCD_RCMD2 (0xA800000)
64#define BAST_VA_LCD_RCMD2 BAST_IOADDR(0x00B00000)
65
66#define BAST_PA_LCD_WCMD2 (0xA000000)
67#define BAST_VA_LCD_WCMD2 BAST_IOADDR(0x00C00000)
68
69#define BAST_PA_LCD_RDATA2 (0xB800000)
70#define BAST_VA_LCD_RDATA2 BAST_IOADDR(0x00D00000)
71
72#define BAST_PA_LCD_WDATA2 (0xB000000)
73#define BAST_VA_LCD_WDATA2 BAST_IOADDR(0x00E00000)
74
75
76/* 0xE0000000 contains the IO space that is split by speed and
77 * wether the access is for 8 or 16bit IO... this ensures that
78 * the correct access is made
79 *
80 * 0x10000000 of space, partitioned as so:
81 *
82 * 0x00000000 to 0x04000000 8bit, slow
83 * 0x04000000 to 0x08000000 16bit, slow
84 * 0x08000000 to 0x0C000000 16bit, net
85 * 0x0C000000 to 0x10000000 16bit, fast
86 *
87 * each of these spaces has the following in:
88 *
89 * 0x00000000 to 0x01000000 16MB ISA IO space
90 * 0x01000000 to 0x02000000 16MB ISA memory space
91 * 0x02000000 to 0x02100000 1MB IDE primary channel
92 * 0x02100000 to 0x02200000 1MB IDE primary channel aux
93 * 0x02200000 to 0x02400000 1MB IDE secondary channel
94 * 0x02300000 to 0x02400000 1MB IDE secondary channel aux
95 * 0x02400000 to 0x02500000 1MB ASIX ethernet controller
96 * 0x02500000 to 0x02600000 1MB Davicom DM9000 ethernet controller
97 * 0x02600000 to 0x02700000 1MB PC SuperIO controller
98 *
99 * the phyiscal layout of the zones are:
100 * nGCS2 - 8bit, slow
101 * nGCS3 - 16bit, slow
102 * nGCS4 - 16bit, net
103 * nGCS5 - 16bit, fast
104 */
105
106#define BAST_VA_MULTISPACE (0xE0000000)
107
108#define BAST_VA_ISAIO (BAST_VA_MULTISPACE + 0x00000000)
109#define BAST_VA_ISAMEM (BAST_VA_MULTISPACE + 0x01000000)
110#define BAST_VA_IDEPRI (BAST_VA_MULTISPACE + 0x02000000)
111#define BAST_VA_IDEPRIAUX (BAST_VA_MULTISPACE + 0x02100000)
112#define BAST_VA_IDESEC (BAST_VA_MULTISPACE + 0x02200000)
113#define BAST_VA_IDESECAUX (BAST_VA_MULTISPACE + 0x02300000)
114#define BAST_VA_ASIXNET (BAST_VA_MULTISPACE + 0x02400000)
115#define BAST_VA_DM9000 (BAST_VA_MULTISPACE + 0x02500000)
116#define BAST_VA_SUPERIO (BAST_VA_MULTISPACE + 0x02600000)
117
118#define BAST_VA_MULTISPACE (0xE0000000)
119
120#define BAST_VAM_CS2 (0x00000000)
121#define BAST_VAM_CS3 (0x04000000)
122#define BAST_VAM_CS4 (0x08000000)
123#define BAST_VAM_CS5 (0x0C000000)
124
125/* physical offset addresses for the peripherals */
126
127#define BAST_PA_ISAIO (0x00000000)
128#define BAST_PA_ASIXNET (0x01000000)
129#define BAST_PA_SUPERIO (0x01800000)
130#define BAST_PA_IDEPRI (0x02000000)
131#define BAST_PA_IDEPRIAUX (0x02800000)
132#define BAST_PA_IDESEC (0x03000000)
133#define BAST_PA_IDESECAUX (0x03800000)
134#define BAST_PA_ISAMEM (0x04000000)
135#define BAST_PA_DM9000 (0x05000000)
136
137/* some configurations for the peripherals */
138
139#define BAST_PCSIO (BAST_VA_SUPERIO + BAST_VAM_CS2)
140/* */
141
142#define BAST_ASIXNET_CS BAST_VAM_CS5
143#define BAST_IDE_CS BAST_VAM_CS5
144#define BAST_DM9000_CS BAST_VAM_CS4
145
146#endif /* __ASM_ARCH_BASTMAP_H */
diff --git a/include/asm-arm/arch-s3c2410/bast-pmu.h b/include/asm-arm/arch-s3c2410/bast-pmu.h
deleted file mode 100644
index 37a11fe54a78..000000000000
--- a/include/asm-arm/arch-s3c2410/bast-pmu.h
+++ /dev/null
@@ -1,40 +0,0 @@
1/* linux/include/asm-arm/arch-s3c2410/bast-pmu.h
2 *
3 * Copyright (c) 2003,2004 Simtec Electronics
4 * Ben Dooks <ben@simtec.co.uk>
5 * Vincent Sanders <vince@simtec.co.uk>
6 *
7 * Machine BAST - Power Management chip
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
12*/
13
14#ifndef __ASM_ARCH_BASTPMU_H
15#define __ASM_ARCH_BASTPMU_H "08_OCT_2004"
16
17#define BASTPMU_REG_IDENT (0x00)
18#define BASTPMU_REG_VERSION (0x01)
19#define BASTPMU_REG_DDCCTRL (0x02)
20#define BASTPMU_REG_POWER (0x03)
21#define BASTPMU_REG_RESET (0x04)
22#define BASTPMU_REG_GWO (0x05)
23#define BASTPMU_REG_WOL (0x06)
24#define BASTPMU_REG_WOR (0x07)
25#define BASTPMU_REG_UID (0x09)
26
27#define BASTPMU_EEPROM (0xC0)
28
29#define BASTPMU_EEP_UID (BASTPMU_EEPROM + 0)
30#define BASTPMU_EEP_WOL (BASTPMU_EEPROM + 8)
31#define BASTPMU_EEP_WOR (BASTPMU_EEPROM + 9)
32
33#define BASTPMU_IDENT_0 0x53
34#define BASTPMU_IDENT_1 0x42
35#define BASTPMU_IDENT_2 0x50
36#define BASTPMU_IDENT_3 0x4d
37
38#define BASTPMU_RESET_GUARD (0x55)
39
40#endif /* __ASM_ARCH_BASTPMU_H */
diff --git a/include/asm-arm/arch-s3c2410/debug-macro.S b/include/asm-arm/arch-s3c2410/debug-macro.S
deleted file mode 100644
index 89076c322726..000000000000
--- a/include/asm-arm/arch-s3c2410/debug-macro.S
+++ /dev/null
@@ -1,102 +0,0 @@
1/* linux/include/asm-arm/arch-s3c2410/debug-macro.S
2 *
3 * Debugging macro include header
4 *
5 * Copyright (C) 1994-1999 Russell King
6 * Copyright (C) 2005 Simtec Electronics
7 *
8 * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
9 *
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
13*/
14
15#include <asm/arch/map.h>
16#include <asm/arch/regs-gpio.h>
17#include <asm/plat-s3c/regs-serial.h>
18
19#define S3C2410_UART1_OFF (0x4000)
20#define SHIFT_2440TXF (14-9)
21
22 .macro addruart, rx
23 mrc p15, 0, \rx, c1, c0
24 tst \rx, #1
25 ldreq \rx, = S3C24XX_PA_UART
26 ldrne \rx, = S3C24XX_VA_UART
27#if CONFIG_DEBUG_S3C_UART != 0
28 add \rx, \rx, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART)
29#endif
30 .endm
31
32 .macro fifo_full_s3c24xx rd, rx
33 @ check for arm920 vs arm926. currently assume all arm926
34 @ devices have an 64 byte FIFO identical to the s3c2440
35 mrc p15, 0, \rd, c0, c0
36 and \rd, \rd, #0xff0
37 teq \rd, #0x260
38 beq 1004f
39 mrc p15, 0, \rd, c1, c0
40 tst \rd, #1
41 addeq \rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART)
42 addne \rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART)
43 bic \rd, \rd, #0xff000
44 ldr \rd, [ \rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0) ]
45 and \rd, \rd, #0x00ff0000
46 teq \rd, #0x00440000 @ is it 2440?
471004:
48 ldr \rd, [ \rx, # S3C2410_UFSTAT ]
49 moveq \rd, \rd, lsr #SHIFT_2440TXF
50 tst \rd, #S3C2410_UFSTAT_TXFULL
51 .endm
52
53 .macro fifo_full_s3c2410 rd, rx
54 ldr \rd, [ \rx, # S3C2410_UFSTAT ]
55 tst \rd, #S3C2410_UFSTAT_TXFULL
56 .endm
57
58/* fifo level reading */
59
60 .macro fifo_level_s3c24xx rd, rx
61 @ check for arm920 vs arm926. currently assume all arm926
62 @ devices have an 64 byte FIFO identical to the s3c2440
63 mrc p15, 0, \rd, c0, c0
64 and \rd, \rd, #0xff0
65 teq \rd, #0x260
66 beq 10000f
67 mrc p15, 0, \rd, c1, c0
68 tst \rd, #1
69 addeq \rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART)
70 addne \rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART)
71 bic \rd, \rd, #0xff000
72 ldr \rd, [ \rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0) ]
73 and \rd, \rd, #0x00ff0000
74 teq \rd, #0x00440000 @ is it 2440?
75
7610000:
77 ldr \rd, [ \rx, # S3C2410_UFSTAT ]
78 andne \rd, \rd, #S3C2410_UFSTAT_TXMASK
79 andeq \rd, \rd, #S3C2440_UFSTAT_TXMASK
80 .endm
81
82 .macro fifo_level_s3c2410 rd, rx
83 ldr \rd, [ \rx, # S3C2410_UFSTAT ]
84 and \rd, \rd, #S3C2410_UFSTAT_TXMASK
85 .endm
86
87/* Select the correct implementation depending on the configuration. The
88 * S3C2440 will get selected by default, as these are the most widely
89 * used variants of these
90*/
91
92#if defined(CONFIG_CPU_LLSERIAL_S3C2410_ONLY)
93#define fifo_full fifo_full_s3c2410
94#define fifo_level fifo_level_s3c2410
95#elif !defined(CONFIG_CPU_LLSERIAL_S3C2440_ONLY)
96#define fifo_full fifo_full_s3c24xx
97#define fifo_level fifo_level_s3c24xx
98#endif
99
100/* include the reset of the code which will do the work */
101
102#include <asm/plat-s3c/debug-macro.S>
diff --git a/include/asm-arm/arch-s3c2410/dma.h b/include/asm-arm/arch-s3c2410/dma.h
deleted file mode 100644
index 86eaa0c2dc1e..000000000000
--- a/include/asm-arm/arch-s3c2410/dma.h
+++ /dev/null
@@ -1,453 +0,0 @@
1/* linux/include/asm-arm/arch-s3c2410/dma.h
2 *
3 * Copyright (C) 2003,2004,2006 Simtec Electronics
4 * Ben Dooks <ben@simtec.co.uk>
5 *
6 * Samsung S3C241XX DMA support
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
11*/
12
13#ifndef __ASM_ARCH_DMA_H
14#define __ASM_ARCH_DMA_H __FILE__
15
16#include <linux/sysdev.h>
17#include <asm/arch/hardware.h>
18
19/*
20 * This is the maximum DMA address(physical address) that can be DMAd to.
21 *
22 */
23#define MAX_DMA_ADDRESS 0x40000000
24#define MAX_DMA_TRANSFER_SIZE 0x100000 /* Data Unit is half word */
25
26/* We use `virtual` dma channels to hide the fact we have only a limited
27 * number of DMA channels, and not of all of them (dependant on the device)
28 * can be attached to any DMA source. We therefore let the DMA core handle
29 * the allocation of hardware channels to clients.
30*/
31
32enum dma_ch {
33 DMACH_XD0,
34 DMACH_XD1,
35 DMACH_SDI,
36 DMACH_SPI0,
37 DMACH_SPI1,
38 DMACH_UART0,
39 DMACH_UART1,
40 DMACH_UART2,
41 DMACH_TIMER,
42 DMACH_I2S_IN,
43 DMACH_I2S_OUT,
44 DMACH_PCM_IN,
45 DMACH_PCM_OUT,
46 DMACH_MIC_IN,
47 DMACH_USB_EP1,
48 DMACH_USB_EP2,
49 DMACH_USB_EP3,
50 DMACH_USB_EP4,
51 DMACH_UART0_SRC2, /* s3c2412 second uart sources */
52 DMACH_UART1_SRC2,
53 DMACH_UART2_SRC2,
54 DMACH_UART3, /* s3c2443 has extra uart */
55 DMACH_UART3_SRC2,
56 DMACH_MAX, /* the end entry */
57};
58
59#define DMACH_LOW_LEVEL (1<<28) /* use this to specifiy hardware ch no */
60
61/* we have 4 dma channels */
62#ifndef CONFIG_CPU_S3C2443
63#define S3C2410_DMA_CHANNELS (4)
64#else
65#define S3C2410_DMA_CHANNELS (6)
66#endif
67
68/* types */
69
70enum s3c2410_dma_state {
71 S3C2410_DMA_IDLE,
72 S3C2410_DMA_RUNNING,
73 S3C2410_DMA_PAUSED
74};
75
76
77/* enum s3c2410_dma_loadst
78 *
79 * This represents the state of the DMA engine, wrt to the loaded / running
80 * transfers. Since we don't have any way of knowing exactly the state of
81 * the DMA transfers, we need to know the state to make decisions on wether
82 * we can
83 *
84 * S3C2410_DMA_NONE
85 *
86 * There are no buffers loaded (the channel should be inactive)
87 *
88 * S3C2410_DMA_1LOADED
89 *
90 * There is one buffer loaded, however it has not been confirmed to be
91 * loaded by the DMA engine. This may be because the channel is not
92 * yet running, or the DMA driver decided that it was too costly to
93 * sit and wait for it to happen.
94 *
95 * S3C2410_DMA_1RUNNING
96 *
97 * The buffer has been confirmed running, and not finisged
98 *
99 * S3C2410_DMA_1LOADED_1RUNNING
100 *
101 * There is a buffer waiting to be loaded by the DMA engine, and one
102 * currently running.
103*/
104
105enum s3c2410_dma_loadst {
106 S3C2410_DMALOAD_NONE,
107 S3C2410_DMALOAD_1LOADED,
108 S3C2410_DMALOAD_1RUNNING,
109 S3C2410_DMALOAD_1LOADED_1RUNNING,
110};
111
112enum s3c2410_dma_buffresult {
113 S3C2410_RES_OK,
114 S3C2410_RES_ERR,
115 S3C2410_RES_ABORT
116};
117
118enum s3c2410_dmasrc {
119 S3C2410_DMASRC_HW, /* source is memory */
120 S3C2410_DMASRC_MEM /* source is hardware */
121};
122
123/* enum s3c2410_chan_op
124 *
125 * operation codes passed to the DMA code by the user, and also used
126 * to inform the current channel owner of any changes to the system state
127*/
128
129enum s3c2410_chan_op {
130 S3C2410_DMAOP_START,
131 S3C2410_DMAOP_STOP,
132 S3C2410_DMAOP_PAUSE,
133 S3C2410_DMAOP_RESUME,
134 S3C2410_DMAOP_FLUSH,
135 S3C2410_DMAOP_TIMEOUT, /* internal signal to handler */
136 S3C2410_DMAOP_STARTED, /* indicate channel started */
137};
138
139/* flags */
140
141#define S3C2410_DMAF_SLOW (1<<0) /* slow, so don't worry about
142 * waiting for reloads */
143#define S3C2410_DMAF_AUTOSTART (1<<1) /* auto-start if buffer queued */
144
145/* dma buffer */
146
147struct s3c2410_dma_client {
148 char *name;
149};
150
151/* s3c2410_dma_buf_s
152 *
153 * internally used buffer structure to describe a queued or running
154 * buffer.
155*/
156
157struct s3c2410_dma_buf;
158struct s3c2410_dma_buf {
159 struct s3c2410_dma_buf *next;
160 int magic; /* magic */
161 int size; /* buffer size in bytes */
162 dma_addr_t data; /* start of DMA data */
163 dma_addr_t ptr; /* where the DMA got to [1] */
164 void *id; /* client's id */
165};
166
167/* [1] is this updated for both recv/send modes? */
168
169struct s3c2410_dma_chan;
170
171/* s3c2410_dma_cbfn_t
172 *
173 * buffer callback routine type
174*/
175
176typedef void (*s3c2410_dma_cbfn_t)(struct s3c2410_dma_chan *,
177 void *buf, int size,
178 enum s3c2410_dma_buffresult result);
179
180typedef int (*s3c2410_dma_opfn_t)(struct s3c2410_dma_chan *,
181 enum s3c2410_chan_op );
182
183struct s3c2410_dma_stats {
184 unsigned long loads;
185 unsigned long timeout_longest;
186 unsigned long timeout_shortest;
187 unsigned long timeout_avg;
188 unsigned long timeout_failed;
189};
190
191struct s3c2410_dma_map;
192
193/* struct s3c2410_dma_chan
194 *
195 * full state information for each DMA channel
196*/
197
198struct s3c2410_dma_chan {
199 /* channel state flags and information */
200 unsigned char number; /* number of this dma channel */
201 unsigned char in_use; /* channel allocated */
202 unsigned char irq_claimed; /* irq claimed for channel */
203 unsigned char irq_enabled; /* irq enabled for channel */
204 unsigned char xfer_unit; /* size of an transfer */
205
206 /* channel state */
207
208 enum s3c2410_dma_state state;
209 enum s3c2410_dma_loadst load_state;
210 struct s3c2410_dma_client *client;
211
212 /* channel configuration */
213 enum s3c2410_dmasrc source;
214 unsigned long dev_addr;
215 unsigned long load_timeout;
216 unsigned int flags; /* channel flags */
217 unsigned int hw_cfg; /* last hw config */
218
219 struct s3c24xx_dma_map *map; /* channel hw maps */
220
221 /* channel's hardware position and configuration */
222 void __iomem *regs; /* channels registers */
223 void __iomem *addr_reg; /* data address register */
224 unsigned int irq; /* channel irq */
225 unsigned long dcon; /* default value of DCON */
226
227 /* driver handles */
228 s3c2410_dma_cbfn_t callback_fn; /* buffer done callback */
229 s3c2410_dma_opfn_t op_fn; /* channel op callback */
230
231 /* stats gathering */
232 struct s3c2410_dma_stats *stats;
233 struct s3c2410_dma_stats stats_store;
234
235 /* buffer list and information */
236 struct s3c2410_dma_buf *curr; /* current dma buffer */
237 struct s3c2410_dma_buf *next; /* next buffer to load */
238 struct s3c2410_dma_buf *end; /* end of queue */
239
240 /* system device */
241 struct sys_device dev;
242};
243
244/* the currently allocated channel information */
245extern struct s3c2410_dma_chan s3c2410_chans[];
246
247/* note, we don't really use dma_device_t at the moment */
248typedef unsigned long dma_device_t;
249
250/* functions --------------------------------------------------------------- */
251
252/* s3c2410_dma_request
253 *
254 * request a dma channel exclusivley
255*/
256
257extern int s3c2410_dma_request(dmach_t channel,
258 struct s3c2410_dma_client *, void *dev);
259
260
261/* s3c2410_dma_ctrl
262 *
263 * change the state of the dma channel
264*/
265
266extern int s3c2410_dma_ctrl(dmach_t channel, enum s3c2410_chan_op op);
267
268/* s3c2410_dma_setflags
269 *
270 * set the channel's flags to a given state
271*/
272
273extern int s3c2410_dma_setflags(dmach_t channel,
274 unsigned int flags);
275
276/* s3c2410_dma_free
277 *
278 * free the dma channel (will also abort any outstanding operations)
279*/
280
281extern int s3c2410_dma_free(dmach_t channel, struct s3c2410_dma_client *);
282
283/* s3c2410_dma_enqueue
284 *
285 * place the given buffer onto the queue of operations for the channel.
286 * The buffer must be allocated from dma coherent memory, or the Dcache/WB
287 * drained before the buffer is given to the DMA system.
288*/
289
290extern int s3c2410_dma_enqueue(dmach_t channel, void *id,
291 dma_addr_t data, int size);
292
293/* s3c2410_dma_config
294 *
295 * configure the dma channel
296*/
297
298extern int s3c2410_dma_config(dmach_t channel, int xferunit, int dcon);
299
300/* s3c2410_dma_devconfig
301 *
302 * configure the device we're talking to
303*/
304
305extern int s3c2410_dma_devconfig(int channel, enum s3c2410_dmasrc source,
306 int hwcfg, unsigned long devaddr);
307
308/* s3c2410_dma_getposition
309 *
310 * get the position that the dma transfer is currently at
311*/
312
313extern int s3c2410_dma_getposition(dmach_t channel,
314 dma_addr_t *src, dma_addr_t *dest);
315
316extern int s3c2410_dma_set_opfn(dmach_t, s3c2410_dma_opfn_t rtn);
317extern int s3c2410_dma_set_buffdone_fn(dmach_t, s3c2410_dma_cbfn_t rtn);
318
319/* DMA Register definitions */
320
321#define S3C2410_DMA_DISRC (0x00)
322#define S3C2410_DMA_DISRCC (0x04)
323#define S3C2410_DMA_DIDST (0x08)
324#define S3C2410_DMA_DIDSTC (0x0C)
325#define S3C2410_DMA_DCON (0x10)
326#define S3C2410_DMA_DSTAT (0x14)
327#define S3C2410_DMA_DCSRC (0x18)
328#define S3C2410_DMA_DCDST (0x1C)
329#define S3C2410_DMA_DMASKTRIG (0x20)
330#define S3C2412_DMA_DMAREQSEL (0x24)
331#define S3C2443_DMA_DMAREQSEL (0x24)
332
333#define S3C2410_DISRCC_INC (1<<0)
334#define S3C2410_DISRCC_APB (1<<1)
335
336#define S3C2410_DMASKTRIG_STOP (1<<2)
337#define S3C2410_DMASKTRIG_ON (1<<1)
338#define S3C2410_DMASKTRIG_SWTRIG (1<<0)
339
340#define S3C2410_DCON_DEMAND (0<<31)
341#define S3C2410_DCON_HANDSHAKE (1<<31)
342#define S3C2410_DCON_SYNC_PCLK (0<<30)
343#define S3C2410_DCON_SYNC_HCLK (1<<30)
344
345#define S3C2410_DCON_INTREQ (1<<29)
346
347#define S3C2410_DCON_CH0_XDREQ0 (0<<24)
348#define S3C2410_DCON_CH0_UART0 (1<<24)
349#define S3C2410_DCON_CH0_SDI (2<<24)
350#define S3C2410_DCON_CH0_TIMER (3<<24)
351#define S3C2410_DCON_CH0_USBEP1 (4<<24)
352
353#define S3C2410_DCON_CH1_XDREQ1 (0<<24)
354#define S3C2410_DCON_CH1_UART1 (1<<24)
355#define S3C2410_DCON_CH1_I2SSDI (2<<24)
356#define S3C2410_DCON_CH1_SPI (3<<24)
357#define S3C2410_DCON_CH1_USBEP2 (4<<24)
358
359#define S3C2410_DCON_CH2_I2SSDO (0<<24)
360#define S3C2410_DCON_CH2_I2SSDI (1<<24)
361#define S3C2410_DCON_CH2_SDI (2<<24)
362#define S3C2410_DCON_CH2_TIMER (3<<24)
363#define S3C2410_DCON_CH2_USBEP3 (4<<24)
364
365#define S3C2410_DCON_CH3_UART2 (0<<24)
366#define S3C2410_DCON_CH3_SDI (1<<24)
367#define S3C2410_DCON_CH3_SPI (2<<24)
368#define S3C2410_DCON_CH3_TIMER (3<<24)
369#define S3C2410_DCON_CH3_USBEP4 (4<<24)
370
371#define S3C2410_DCON_SRCSHIFT (24)
372#define S3C2410_DCON_SRCMASK (7<<24)
373
374#define S3C2410_DCON_BYTE (0<<20)
375#define S3C2410_DCON_HALFWORD (1<<20)
376#define S3C2410_DCON_WORD (2<<20)
377
378#define S3C2410_DCON_AUTORELOAD (0<<22)
379#define S3C2410_DCON_NORELOAD (1<<22)
380#define S3C2410_DCON_HWTRIG (1<<23)
381
382#ifdef CONFIG_CPU_S3C2440
383#define S3C2440_DIDSTC_CHKINT (1<<2)
384
385#define S3C2440_DCON_CH0_I2SSDO (5<<24)
386#define S3C2440_DCON_CH0_PCMIN (6<<24)
387
388#define S3C2440_DCON_CH1_PCMOUT (5<<24)
389#define S3C2440_DCON_CH1_SDI (6<<24)
390
391#define S3C2440_DCON_CH2_PCMIN (5<<24)
392#define S3C2440_DCON_CH2_MICIN (6<<24)
393
394#define S3C2440_DCON_CH3_MICIN (5<<24)
395#define S3C2440_DCON_CH3_PCMOUT (6<<24)
396#endif
397
398#ifdef CONFIG_CPU_S3C2412
399
400#define S3C2412_DMAREQSEL_SRC(x) ((x)<<1)
401
402#define S3C2412_DMAREQSEL_HW (1)
403
404#define S3C2412_DMAREQSEL_SPI0TX S3C2412_DMAREQSEL_SRC(0)
405#define S3C2412_DMAREQSEL_SPI0RX S3C2412_DMAREQSEL_SRC(1)
406#define S3C2412_DMAREQSEL_SPI1TX S3C2412_DMAREQSEL_SRC(2)
407#define S3C2412_DMAREQSEL_SPI1RX S3C2412_DMAREQSEL_SRC(3)
408#define S3C2412_DMAREQSEL_I2STX S3C2412_DMAREQSEL_SRC(4)
409#define S3C2412_DMAREQSEL_I2SRX S3C2412_DMAREQSEL_SRC(5)
410#define S3C2412_DMAREQSEL_TIMER S3C2412_DMAREQSEL_SRC(9)
411#define S3C2412_DMAREQSEL_SDI S3C2412_DMAREQSEL_SRC(10)
412#define S3C2412_DMAREQSEL_USBEP1 S3C2412_DMAREQSEL_SRC(13)
413#define S3C2412_DMAREQSEL_USBEP2 S3C2412_DMAREQSEL_SRC(14)
414#define S3C2412_DMAREQSEL_USBEP3 S3C2412_DMAREQSEL_SRC(15)
415#define S3C2412_DMAREQSEL_USBEP4 S3C2412_DMAREQSEL_SRC(16)
416#define S3C2412_DMAREQSEL_XDREQ0 S3C2412_DMAREQSEL_SRC(17)
417#define S3C2412_DMAREQSEL_XDREQ1 S3C2412_DMAREQSEL_SRC(18)
418#define S3C2412_DMAREQSEL_UART0_0 S3C2412_DMAREQSEL_SRC(19)
419#define S3C2412_DMAREQSEL_UART0_1 S3C2412_DMAREQSEL_SRC(20)
420#define S3C2412_DMAREQSEL_UART1_0 S3C2412_DMAREQSEL_SRC(21)
421#define S3C2412_DMAREQSEL_UART1_1 S3C2412_DMAREQSEL_SRC(22)
422#define S3C2412_DMAREQSEL_UART2_0 S3C2412_DMAREQSEL_SRC(23)
423#define S3C2412_DMAREQSEL_UART2_1 S3C2412_DMAREQSEL_SRC(24)
424
425#endif
426
427#define S3C2443_DMAREQSEL_SRC(x) ((x)<<1)
428
429#define S3C2443_DMAREQSEL_HW (1)
430
431#define S3C2443_DMAREQSEL_SPI0TX S3C2443_DMAREQSEL_SRC(0)
432#define S3C2443_DMAREQSEL_SPI0RX S3C2443_DMAREQSEL_SRC(1)
433#define S3C2443_DMAREQSEL_SPI1TX S3C2443_DMAREQSEL_SRC(2)
434#define S3C2443_DMAREQSEL_SPI1RX S3C2443_DMAREQSEL_SRC(3)
435#define S3C2443_DMAREQSEL_I2STX S3C2443_DMAREQSEL_SRC(4)
436#define S3C2443_DMAREQSEL_I2SRX S3C2443_DMAREQSEL_SRC(5)
437#define S3C2443_DMAREQSEL_TIMER S3C2443_DMAREQSEL_SRC(9)
438#define S3C2443_DMAREQSEL_SDI S3C2443_DMAREQSEL_SRC(10)
439#define S3C2443_DMAREQSEL_XDREQ0 S3C2443_DMAREQSEL_SRC(17)
440#define S3C2443_DMAREQSEL_XDREQ1 S3C2443_DMAREQSEL_SRC(18)
441#define S3C2443_DMAREQSEL_UART0_0 S3C2443_DMAREQSEL_SRC(19)
442#define S3C2443_DMAREQSEL_UART0_1 S3C2443_DMAREQSEL_SRC(20)
443#define S3C2443_DMAREQSEL_UART1_0 S3C2443_DMAREQSEL_SRC(21)
444#define S3C2443_DMAREQSEL_UART1_1 S3C2443_DMAREQSEL_SRC(22)
445#define S3C2443_DMAREQSEL_UART2_0 S3C2443_DMAREQSEL_SRC(23)
446#define S3C2443_DMAREQSEL_UART2_1 S3C2443_DMAREQSEL_SRC(24)
447#define S3C2443_DMAREQSEL_UART3_0 S3C2443_DMAREQSEL_SRC(25)
448#define S3C2443_DMAREQSEL_UART3_1 S3C2443_DMAREQSEL_SRC(26)
449#define S3C2443_DMAREQSEL_PCMOUT S3C2443_DMAREQSEL_SRC(27)
450#define S3C2443_DMAREQSEL_PCMIN S3C2443_DMAREQSEL_SRC(28)
451#define S3C2443_DMAREQSEL_MICIN S3C2443_DMAREQSEL_SRC(29)
452
453#endif /* __ASM_ARCH_DMA_H */
diff --git a/include/asm-arm/arch-s3c2410/entry-macro.S b/include/asm-arm/arch-s3c2410/entry-macro.S
deleted file mode 100644
index f70d051b267b..000000000000
--- a/include/asm-arm/arch-s3c2410/entry-macro.S
+++ /dev/null
@@ -1,78 +0,0 @@
1/*
2 * include/asm-arm/arch-s3c2410/entry-macro.S
3 *
4 * Low-level IRQ helper macros for S3C2410-based platforms
5 *
6 * This file is licensed under the terms of the GNU General Public
7 * License version 2. This program is licensed "as is" without any
8 * warranty of any kind, whether express or implied.
9*/
10
11/* We have a problem that the INTOFFSET register does not always
12 * show one interrupt. Occasionally we get two interrupts through
13 * the prioritiser, and this causes the INTOFFSET register to show
14 * what looks like the logical-or of the two interrupt numbers.
15 *
16 * Thanks to Klaus, Shannon, et al for helping to debug this problem
17*/
18
19#define INTPND (0x10)
20#define INTOFFSET (0x14)
21
22#include <asm/arch/hardware.h>
23#include <asm/irq.h>
24
25 .macro get_irqnr_preamble, base, tmp
26 .endm
27
28 .macro arch_ret_to_user, tmp1, tmp2
29 .endm
30
31 .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
32
33 mov \base, #S3C24XX_VA_IRQ
34
35 @@ try the interrupt offset register, since it is there
36
37 ldr \irqstat, [ \base, #INTPND ]
38 teq \irqstat, #0
39 beq 1002f
40 ldr \irqnr, [ \base, #INTOFFSET ]
41 mov \tmp, #1
42 tst \irqstat, \tmp, lsl \irqnr
43 bne 1001f
44
45 @@ the number specified is not a valid irq, so try
46 @@ and work it out for ourselves
47
48 mov \irqnr, #0 @@ start here
49
50 @@ work out which irq (if any) we got
51
52 movs \tmp, \irqstat, lsl#16
53 addeq \irqnr, \irqnr, #16
54 moveq \irqstat, \irqstat, lsr#16
55 tst \irqstat, #0xff
56 addeq \irqnr, \irqnr, #8
57 moveq \irqstat, \irqstat, lsr#8
58 tst \irqstat, #0xf
59 addeq \irqnr, \irqnr, #4
60 moveq \irqstat, \irqstat, lsr#4
61 tst \irqstat, #0x3
62 addeq \irqnr, \irqnr, #2
63 moveq \irqstat, \irqstat, lsr#2
64 tst \irqstat, #0x1
65 addeq \irqnr, \irqnr, #1
66
67 @@ we have the value
681001:
69 adds \irqnr, \irqnr, #IRQ_EINT0
701002:
71 @@ exit here, Z flag unset if IRQ
72
73 .endm
74
75 /* currently don't need an disable_fiq macro */
76
77 .macro disable_fiq
78 .endm
diff --git a/include/asm-arm/arch-s3c2410/fb.h b/include/asm-arm/arch-s3c2410/fb.h
deleted file mode 100644
index 5d0262601a7e..000000000000
--- a/include/asm-arm/arch-s3c2410/fb.h
+++ /dev/null
@@ -1,74 +0,0 @@
1/* linux/include/asm-arm/arch-s3c2410/fb.h
2 *
3 * Copyright (c) 2004 Arnaud Patard <arnaud.patard@rtp-net.org>
4 *
5 * Inspired by pxafb.h
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2 as
9 * published by the Free Software Foundation.
10*/
11
12#ifndef __ASM_ARM_FB_H
13#define __ASM_ARM_FB_H
14
15#include <asm/arch/regs-lcd.h>
16
17struct s3c2410fb_hw {
18 unsigned long lcdcon1;
19 unsigned long lcdcon2;
20 unsigned long lcdcon3;
21 unsigned long lcdcon4;
22 unsigned long lcdcon5;
23};
24
25/* LCD description */
26struct s3c2410fb_display {
27 /* LCD type */
28 unsigned type;
29
30 /* Screen size */
31 unsigned short width;
32 unsigned short height;
33
34 /* Screen info */
35 unsigned short xres;
36 unsigned short yres;
37 unsigned short bpp;
38
39 unsigned pixclock; /* pixclock in picoseconds */
40 unsigned short left_margin; /* value in pixels (TFT) or HCLKs (STN) */
41 unsigned short right_margin; /* value in pixels (TFT) or HCLKs (STN) */
42 unsigned short hsync_len; /* value in pixels (TFT) or HCLKs (STN) */
43 unsigned short upper_margin; /* value in lines (TFT) or 0 (STN) */
44 unsigned short lower_margin; /* value in lines (TFT) or 0 (STN) */
45 unsigned short vsync_len; /* value in lines (TFT) or 0 (STN) */
46
47 /* lcd configuration registers */
48 unsigned long lcdcon5;
49};
50
51struct s3c2410fb_mach_info {
52
53 struct s3c2410fb_display *displays; /* attached diplays info */
54 unsigned num_displays; /* number of defined displays */
55 unsigned default_display;
56
57 /* GPIOs */
58
59 unsigned long gpcup;
60 unsigned long gpcup_mask;
61 unsigned long gpccon;
62 unsigned long gpccon_mask;
63 unsigned long gpdup;
64 unsigned long gpdup_mask;
65 unsigned long gpdcon;
66 unsigned long gpdcon_mask;
67
68 /* lpc3600 control register */
69 unsigned long lpcsel;
70};
71
72extern void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *);
73
74#endif /* __ASM_ARM_FB_H */
diff --git a/include/asm-arm/arch-s3c2410/gpio.h b/include/asm-arm/arch-s3c2410/gpio.h
deleted file mode 100644
index 18e10d2c35ea..000000000000
--- a/include/asm-arm/arch-s3c2410/gpio.h
+++ /dev/null
@@ -1,18 +0,0 @@
1/* linux/include/asm-arm/arch-s3c2410/gpio.h
2 *
3 * Copyright (c) 2008 Simtec Electronics
4 * http://armlinux.simtec.co.uk/
5 * Ben Dooks <ben@simtec.co.uk>
6 *
7 * S3C2410 - GPIO lib support
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
12*/
13
14#define gpio_get_value __gpio_get_value
15#define gpio_set_value __gpio_set_value
16#define gpio_cansleep __gpio_cansleep
17
18#include <asm-generic/gpio.h>
diff --git a/include/asm-arm/arch-s3c2410/h1940-latch.h b/include/asm-arm/arch-s3c2410/h1940-latch.h
deleted file mode 100644
index c3de5ab102eb..000000000000
--- a/include/asm-arm/arch-s3c2410/h1940-latch.h
+++ /dev/null
@@ -1,64 +0,0 @@
1/* linux/include/asm-arm/arch-s3c2410/h1940-latch.h
2 *
3 * Copyright (c) 2005 Simtec Electronics
4 * http://armlinux.simtec.co.uk/
5 * Ben Dooks <ben@simtec.co.uk>
6 *
7 * iPAQ H1940 series - latch definitions
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
12*/
13
14#ifndef __ASM_ARCH_H1940_LATCH_H
15#define __ASM_ARCH_H1940_LATCH_H
16
17
18#ifndef __ASSEMBLY__
19#define H1940_LATCH ((void __force __iomem *)0xF8000000)
20#else
21#define H1940_LATCH 0xF8000000
22#endif
23
24#define H1940_PA_LATCH (S3C2410_CS2)
25
26/* SD layer latch */
27
28#define H1940_LATCH_SDQ1 (1<<16)
29#define H1940_LATCH_LCD_P1 (1<<17)
30#define H1940_LATCH_LCD_P2 (1<<18)
31#define H1940_LATCH_LCD_P3 (1<<19)
32#define H1940_LATCH_MAX1698_nSHUTDOWN (1<<20) /* LCD backlight */
33#define H1940_LATCH_LED_RED (1<<21)
34#define H1940_LATCH_SDQ7 (1<<22)
35#define H1940_LATCH_USB_DP (1<<23)
36
37/* CPU layer latch */
38
39#define H1940_LATCH_UDA_POWER (1<<24)
40#define H1940_LATCH_AUDIO_POWER (1<<25)
41#define H1940_LATCH_SM803_ENABLE (1<<26)
42#define H1940_LATCH_LCD_P4 (1<<27)
43#define H1940_LATCH_CPUQ5 (1<<28) /* untraced */
44#define H1940_LATCH_BLUETOOTH_POWER (1<<29) /* active high */
45#define H1940_LATCH_LED_GREEN (1<<30)
46#define H1940_LATCH_LED_FLASH (1<<31)
47
48/* default settings */
49
50#define H1940_LATCH_DEFAULT \
51 H1940_LATCH_LCD_P4 | \
52 H1940_LATCH_SM803_ENABLE | \
53 H1940_LATCH_SDQ1 | \
54 H1940_LATCH_LCD_P1 | \
55 H1940_LATCH_LCD_P2 | \
56 H1940_LATCH_LCD_P3 | \
57 H1940_LATCH_MAX1698_nSHUTDOWN | \
58 H1940_LATCH_CPUQ5
59
60/* control functions */
61
62extern void h1940_latch_control(unsigned int clear, unsigned int set);
63
64#endif /* __ASM_ARCH_H1940_LATCH_H */
diff --git a/include/asm-arm/arch-s3c2410/h1940.h b/include/asm-arm/arch-s3c2410/h1940.h
deleted file mode 100644
index 6135592e60f2..000000000000
--- a/include/asm-arm/arch-s3c2410/h1940.h
+++ /dev/null
@@ -1,21 +0,0 @@
1/* linux/include/asm-arm/arch-s3c2410/h1940.h
2 *
3 * Copyright 2006 Ben Dooks <ben-linux@fluff.org>
4 *
5 * H1940 definitions
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2 as
9 * published by the Free Software Foundation.
10*/
11
12#ifndef __ASM_ARCH_H1940_H
13#define __ASM_ARCH_H1940_H
14
15#define H1940_SUSPEND_CHECKSUM (0x30003ff8)
16#define H1940_SUSPEND_RESUMEAT (0x30081000)
17#define H1940_SUSPEND_CHECK (0x30080000)
18
19extern void h1940_pm_return(void);
20
21#endif /* __ASM_ARCH_H1940_H */
diff --git a/include/asm-arm/arch-s3c2410/hardware.h b/include/asm-arm/arch-s3c2410/hardware.h
deleted file mode 100644
index 6dd10be43145..000000000000
--- a/include/asm-arm/arch-s3c2410/hardware.h
+++ /dev/null
@@ -1,137 +0,0 @@
1/* linux/include/asm-arm/arch-s3c2410/hardware.h
2 *
3 * Copyright (c) 2003 Simtec Electronics
4 * Ben Dooks <ben@simtec.co.uk>
5 *
6 * S3C2410 - hardware
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
11*/
12
13#ifndef __ASM_ARCH_HARDWARE_H
14#define __ASM_ARCH_HARDWARE_H
15
16#ifndef __ASSEMBLY__
17
18/* external functions for GPIO support
19 *
20 * These allow various different clients to access the same GPIO
21 * registers without conflicting. If your driver only owns the entire
22 * GPIO register, then it is safe to ioremap/__raw_{read|write} to it.
23*/
24
25/* s3c2410_gpio_cfgpin
26 *
27 * set the configuration of the given pin to the value passed.
28 *
29 * eg:
30 * s3c2410_gpio_cfgpin(S3C2410_GPA0, S3C2410_GPA0_ADDR0);
31 * s3c2410_gpio_cfgpin(S3C2410_GPE8, S3C2410_GPE8_SDDAT1);
32*/
33
34extern void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function);
35
36extern unsigned int s3c2410_gpio_getcfg(unsigned int pin);
37
38/* s3c2410_gpio_getirq
39 *
40 * turn the given pin number into the corresponding IRQ number
41 *
42 * returns:
43 * < 0 = no interrupt for this pin
44 * >=0 = interrupt number for the pin
45*/
46
47extern int s3c2410_gpio_getirq(unsigned int pin);
48
49/* s3c2410_gpio_irq2pin
50 *
51 * turn the given irq number into the corresponding GPIO number
52 *
53 * returns:
54 * < 0 = no pin
55 * >=0 = gpio pin number
56*/
57
58extern int s3c2410_gpio_irq2pin(unsigned int irq);
59
60#ifdef CONFIG_CPU_S3C2400
61
62extern int s3c2400_gpio_getirq(unsigned int pin);
63
64#endif /* CONFIG_CPU_S3C2400 */
65
66/* s3c2410_gpio_irqfilter
67 *
68 * set the irq filtering on the given pin
69 *
70 * on = 0 => disable filtering
71 * 1 => enable filtering
72 *
73 * config = S3C2410_EINTFLT_PCLK or S3C2410_EINTFLT_EXTCLK orred with
74 * width of filter (0 through 63)
75 *
76 *
77*/
78
79extern int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
80 unsigned int config);
81
82/* s3c2410_gpio_pullup
83 *
84 * configure the pull-up control on the given pin
85 *
86 * to = 1 => disable the pull-up
87 * 0 => enable the pull-up
88 *
89 * eg;
90 *
91 * s3c2410_gpio_pullup(S3C2410_GPB0, 0);
92 * s3c2410_gpio_pullup(S3C2410_GPE8, 0);
93*/
94
95extern void s3c2410_gpio_pullup(unsigned int pin, unsigned int to);
96
97/* s3c2410_gpio_getpull
98 *
99 * Read the state of the pull-up on a given pin
100 *
101 * return:
102 * < 0 => error code
103 * 0 => enabled
104 * 1 => disabled
105*/
106
107extern int s3c2410_gpio_getpull(unsigned int pin);
108
109extern void s3c2410_gpio_setpin(unsigned int pin, unsigned int to);
110
111extern unsigned int s3c2410_gpio_getpin(unsigned int pin);
112
113extern unsigned int s3c2410_modify_misccr(unsigned int clr, unsigned int chg);
114
115#ifdef CONFIG_CPU_S3C2440
116
117extern int s3c2440_set_dsc(unsigned int pin, unsigned int value);
118
119#endif /* CONFIG_CPU_S3C2440 */
120
121#ifdef CONFIG_CPU_S3C2412
122
123extern int s3c2412_gpio_set_sleepcfg(unsigned int pin, unsigned int state);
124
125#endif /* CONFIG_CPU_S3C2412 */
126
127#endif /* __ASSEMBLY__ */
128
129#include <asm/sizes.h>
130#include <asm/arch/map.h>
131
132/* machine specific hardware definitions should go after this */
133
134/* currently here until moved into config (todo) */
135#define CONFIG_NO_MULTIWORD_IO
136
137#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/include/asm-arm/arch-s3c2410/idle.h b/include/asm-arm/arch-s3c2410/idle.h
deleted file mode 100644
index eed450608f9c..000000000000
--- a/include/asm-arm/arch-s3c2410/idle.h
+++ /dev/null
@@ -1,24 +0,0 @@
1/* linux/include/asm-arm/arch-s3c2410/idle.h
2 *
3 * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
4 * http://www.simtec.co.uk/products/SWLINUX/
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
9 *
10 * S3C2410 CPU Idle controls
11*/
12
13#ifndef __ASM_ARCH_IDLE_H
14#define __ASM_ARCH_IDLE_H __FILE__
15
16/* This allows the over-ride of the default idle code, in case there
17 * is any other things to be done over idle (like DVS)
18*/
19
20extern void (*s3c24xx_idle)(void);
21
22extern void s3c24xx_default_idle(void);
23
24#endif /* __ASM_ARCH_IDLE_H */
diff --git a/include/asm-arm/arch-s3c2410/io.h b/include/asm-arm/arch-s3c2410/io.h
deleted file mode 100644
index 3756c993776c..000000000000
--- a/include/asm-arm/arch-s3c2410/io.h
+++ /dev/null
@@ -1,218 +0,0 @@
1/*
2 * linux/include/asm-arm/arch-s3c2410/io.h
3 * from linux/include/asm-arm/arch-rpc/io.h
4 *
5 * Copyright (C) 1997 Russell King
6 * (C) 2003 Simtec Electronics
7*/
8
9#ifndef __ASM_ARM_ARCH_IO_H
10#define __ASM_ARM_ARCH_IO_H
11
12#include <asm/arch/hardware.h>
13
14#define IO_SPACE_LIMIT 0xffffffff
15
16/*
17 * We use two different types of addressing - PC style addresses, and ARM
18 * addresses. PC style accesses the PC hardware with the normal PC IO
19 * addresses, eg 0x3f8 for serial#1. ARM addresses are above A28
20 * and are translated to the start of IO. Note that all addresses are
21 * not shifted left!
22 */
23
24#define __PORT_PCIO(x) ((x) < (1<<28))
25
26#define PCIO_BASE (S3C24XX_VA_ISA_WORD)
27#define PCIO_BASE_b (S3C24XX_VA_ISA_BYTE)
28#define PCIO_BASE_w (S3C24XX_VA_ISA_WORD)
29#define PCIO_BASE_l (S3C24XX_VA_ISA_WORD)
30/*
31 * Dynamic IO functions - let the compiler
32 * optimize the expressions
33 */
34
35#define DECLARE_DYN_OUT(sz,fnsuffix,instr) \
36static inline void __out##fnsuffix (unsigned int val, unsigned int port) \
37{ \
38 unsigned long temp; \
39 __asm__ __volatile__( \
40 "cmp %2, #(1<<28)\n\t" \
41 "mov %0, %2\n\t" \
42 "addcc %0, %0, %3\n\t" \
43 "str" instr " %1, [%0, #0 ] @ out" #fnsuffix \
44 : "=&r" (temp) \
45 : "r" (val), "r" (port), "Ir" (PCIO_BASE_##fnsuffix) \
46 : "cc"); \
47}
48
49
50#define DECLARE_DYN_IN(sz,fnsuffix,instr) \
51static inline unsigned sz __in##fnsuffix (unsigned int port) \
52{ \
53 unsigned long temp, value; \
54 __asm__ __volatile__( \
55 "cmp %2, #(1<<28)\n\t" \
56 "mov %0, %2\n\t" \
57 "addcc %0, %0, %3\n\t" \
58 "ldr" instr " %1, [%0, #0 ] @ in" #fnsuffix \
59 : "=&r" (temp), "=r" (value) \
60 : "r" (port), "Ir" (PCIO_BASE_##fnsuffix) \
61 : "cc"); \
62 return (unsigned sz)value; \
63}
64
65static inline void __iomem *__ioaddr (unsigned long port)
66{
67 return __PORT_PCIO(port) ? (PCIO_BASE + port) : (void __iomem *)port;
68}
69
70#define DECLARE_IO(sz,fnsuffix,instr) \
71 DECLARE_DYN_IN(sz,fnsuffix,instr) \
72 DECLARE_DYN_OUT(sz,fnsuffix,instr)
73
74DECLARE_IO(char,b,"b")
75DECLARE_IO(short,w,"h")
76DECLARE_IO(int,l,"")
77
78#undef DECLARE_IO
79#undef DECLARE_DYN_IN
80
81/*
82 * Constant address IO functions
83 *
84 * These have to be macros for the 'J' constraint to work -
85 * +/-4096 immediate operand.
86 */
87#define __outbc(value,port) \
88({ \
89 if (__PORT_PCIO((port))) \
90 __asm__ __volatile__( \
91 "strb %0, [%1, %2] @ outbc" \
92 : : "r" (value), "r" (PCIO_BASE), "Jr" ((port))); \
93 else \
94 __asm__ __volatile__( \
95 "strb %0, [%1, #0] @ outbc" \
96 : : "r" (value), "r" ((port))); \
97})
98
99#define __inbc(port) \
100({ \
101 unsigned char result; \
102 if (__PORT_PCIO((port))) \
103 __asm__ __volatile__( \
104 "ldrb %0, [%1, %2] @ inbc" \
105 : "=r" (result) : "r" (PCIO_BASE), "Jr" ((port))); \
106 else \
107 __asm__ __volatile__( \
108 "ldrb %0, [%1, #0] @ inbc" \
109 : "=r" (result) : "r" ((port))); \
110 result; \
111})
112
113#define __outwc(value,port) \
114({ \
115 unsigned long v = value; \
116 if (__PORT_PCIO((port))) { \
117 if ((port) < 256 && (port) > -256) \
118 __asm__ __volatile__( \
119 "strh %0, [%1, %2] @ outwc" \
120 : : "r" (v), "r" (PCIO_BASE), "Jr" ((port))); \
121 else if ((port) > 0) \
122 __asm__ __volatile__( \
123 "strh %0, [%1, %2] @ outwc" \
124 : : "r" (v), \
125 "r" (PCIO_BASE + ((port) & ~0xff)), \
126 "Jr" (((port) & 0xff))); \
127 else \
128 __asm__ __volatile__( \
129 "strh %0, [%1, #0] @ outwc" \
130 : : "r" (v), \
131 "r" (PCIO_BASE + (port))); \
132 } else \
133 __asm__ __volatile__( \
134 "strh %0, [%1, #0] @ outwc" \
135 : : "r" (v), "r" ((port))); \
136})
137
138#define __inwc(port) \
139({ \
140 unsigned short result; \
141 if (__PORT_PCIO((port))) { \
142 if ((port) < 256 && (port) > -256 ) \
143 __asm__ __volatile__( \
144 "ldrh %0, [%1, %2] @ inwc" \
145 : "=r" (result) \
146 : "r" (PCIO_BASE), \
147 "Jr" ((port))); \
148 else if ((port) > 0) \
149 __asm__ __volatile__( \
150 "ldrh %0, [%1, %2] @ inwc" \
151 : "=r" (result) \
152 : "r" (PCIO_BASE + ((port) & ~0xff)), \
153 "Jr" (((port) & 0xff))); \
154 else \
155 __asm__ __volatile__( \
156 "ldrh %0, [%1, #0] @ inwc" \
157 : "=r" (result) \
158 : "r" (PCIO_BASE + ((port)))); \
159 } else \
160 __asm__ __volatile__( \
161 "ldrh %0, [%1, #0] @ inwc" \
162 : "=r" (result) : "r" ((port))); \
163 result; \
164})
165
166#define __outlc(value,port) \
167({ \
168 unsigned long v = value; \
169 if (__PORT_PCIO((port))) \
170 __asm__ __volatile__( \
171 "str %0, [%1, %2] @ outlc" \
172 : : "r" (v), "r" (PCIO_BASE), "Jr" ((port))); \
173 else \
174 __asm__ __volatile__( \
175 "str %0, [%1, #0] @ outlc" \
176 : : "r" (v), "r" ((port))); \
177})
178
179#define __inlc(port) \
180({ \
181 unsigned long result; \
182 if (__PORT_PCIO((port))) \
183 __asm__ __volatile__( \
184 "ldr %0, [%1, %2] @ inlc" \
185 : "=r" (result) : "r" (PCIO_BASE), "Jr" ((port))); \
186 else \
187 __asm__ __volatile__( \
188 "ldr %0, [%1, #0] @ inlc" \
189 : "=r" (result) : "r" ((port))); \
190 result; \
191})
192
193#define __ioaddrc(port) ((__PORT_PCIO(port) ? PCIO_BASE + (port) : (void __iomem *)(port)))
194
195#define inb(p) (__builtin_constant_p((p)) ? __inbc(p) : __inb(p))
196#define inw(p) (__builtin_constant_p((p)) ? __inwc(p) : __inw(p))
197#define inl(p) (__builtin_constant_p((p)) ? __inlc(p) : __inl(p))
198#define outb(v,p) (__builtin_constant_p((p)) ? __outbc(v,p) : __outb(v,p))
199#define outw(v,p) (__builtin_constant_p((p)) ? __outwc(v,p) : __outw(v,p))
200#define outl(v,p) (__builtin_constant_p((p)) ? __outlc(v,p) : __outl(v,p))
201#define __ioaddr(p) (__builtin_constant_p((p)) ? __ioaddr(p) : __ioaddrc(p))
202/* the following macro is deprecated */
203#define ioaddr(port) __ioaddr((port))
204
205#define insb(p,d,l) __raw_readsb(__ioaddr(p),d,l)
206#define insw(p,d,l) __raw_readsw(__ioaddr(p),d,l)
207#define insl(p,d,l) __raw_readsl(__ioaddr(p),d,l)
208
209#define outsb(p,d,l) __raw_writesb(__ioaddr(p),d,l)
210#define outsw(p,d,l) __raw_writesw(__ioaddr(p),d,l)
211#define outsl(p,d,l) __raw_writesl(__ioaddr(p),d,l)
212
213/*
214 * 1:1 mapping for ioremapped regions.
215 */
216#define __mem_pci(x) (x)
217
218#endif
diff --git a/include/asm-arm/arch-s3c2410/irqs.h b/include/asm-arm/arch-s3c2410/irqs.h
deleted file mode 100644
index f5435d8c3769..000000000000
--- a/include/asm-arm/arch-s3c2410/irqs.h
+++ /dev/null
@@ -1,166 +0,0 @@
1/* linux/include/asm-arm/arch-s3c2410/irqs.h
2 *
3 * Copyright (c) 2003-2005 Simtec Electronics
4 * Ben Dooks <ben@simtec.co.uk>
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
9*/
10
11
12#ifndef __ASM_ARCH_IRQS_H
13#define __ASM_ARCH_IRQS_H __FILE__
14
15#ifndef __ASM_ARM_IRQ_H
16#error "Do not include this directly, instead #include <asm/irq.h>"
17#endif
18
19/* we keep the first set of CPU IRQs out of the range of
20 * the ISA space, so that the PC104 has them to itself
21 * and we don't end up having to do horrible things to the
22 * standard ISA drivers....
23 */
24
25#define S3C2410_CPUIRQ_OFFSET (16)
26
27#define S3C2410_IRQ(x) ((x) + S3C2410_CPUIRQ_OFFSET)
28
29/* main cpu interrupts */
30#define IRQ_EINT0 S3C2410_IRQ(0) /* 16 */
31#define IRQ_EINT1 S3C2410_IRQ(1)
32#define IRQ_EINT2 S3C2410_IRQ(2)
33#define IRQ_EINT3 S3C2410_IRQ(3)
34#define IRQ_EINT4t7 S3C2410_IRQ(4) /* 20 */
35#define IRQ_EINT8t23 S3C2410_IRQ(5)
36#define IRQ_RESERVED6 S3C2410_IRQ(6) /* for s3c2410 */
37#define IRQ_CAM S3C2410_IRQ(6) /* for s3c2440,s3c2443 */
38#define IRQ_BATT_FLT S3C2410_IRQ(7)
39#define IRQ_TICK S3C2410_IRQ(8) /* 24 */
40#define IRQ_WDT S3C2410_IRQ(9) /* WDT/AC97 for s3c2443 */
41#define IRQ_TIMER0 S3C2410_IRQ(10)
42#define IRQ_TIMER1 S3C2410_IRQ(11)
43#define IRQ_TIMER2 S3C2410_IRQ(12)
44#define IRQ_TIMER3 S3C2410_IRQ(13)
45#define IRQ_TIMER4 S3C2410_IRQ(14)
46#define IRQ_UART2 S3C2410_IRQ(15)
47#define IRQ_LCD S3C2410_IRQ(16) /* 32 */
48#define IRQ_DMA0 S3C2410_IRQ(17) /* IRQ_DMA for s3c2443 */
49#define IRQ_DMA1 S3C2410_IRQ(18)
50#define IRQ_DMA2 S3C2410_IRQ(19)
51#define IRQ_DMA3 S3C2410_IRQ(20)
52#define IRQ_SDI S3C2410_IRQ(21)
53#define IRQ_SPI0 S3C2410_IRQ(22)
54#define IRQ_UART1 S3C2410_IRQ(23)
55#define IRQ_RESERVED24 S3C2410_IRQ(24) /* 40 */
56#define IRQ_NFCON S3C2410_IRQ(24) /* for s3c2440 */
57#define IRQ_USBD S3C2410_IRQ(25)
58#define IRQ_USBH S3C2410_IRQ(26)
59#define IRQ_IIC S3C2410_IRQ(27)
60#define IRQ_UART0 S3C2410_IRQ(28) /* 44 */
61#define IRQ_SPI1 S3C2410_IRQ(29)
62#define IRQ_RTC S3C2410_IRQ(30)
63#define IRQ_ADCPARENT S3C2410_IRQ(31)
64
65/* interrupts generated from the external interrupts sources */
66#define IRQ_EINT4 S3C2410_IRQ(32) /* 48 */
67#define IRQ_EINT5 S3C2410_IRQ(33)
68#define IRQ_EINT6 S3C2410_IRQ(34)
69#define IRQ_EINT7 S3C2410_IRQ(35)
70#define IRQ_EINT8 S3C2410_IRQ(36)
71#define IRQ_EINT9 S3C2410_IRQ(37)
72#define IRQ_EINT10 S3C2410_IRQ(38)
73#define IRQ_EINT11 S3C2410_IRQ(39)
74#define IRQ_EINT12 S3C2410_IRQ(40)
75#define IRQ_EINT13 S3C2410_IRQ(41)
76#define IRQ_EINT14 S3C2410_IRQ(42)
77#define IRQ_EINT15 S3C2410_IRQ(43)
78#define IRQ_EINT16 S3C2410_IRQ(44)
79#define IRQ_EINT17 S3C2410_IRQ(45)
80#define IRQ_EINT18 S3C2410_IRQ(46)
81#define IRQ_EINT19 S3C2410_IRQ(47)
82#define IRQ_EINT20 S3C2410_IRQ(48) /* 64 */
83#define IRQ_EINT21 S3C2410_IRQ(49)
84#define IRQ_EINT22 S3C2410_IRQ(50)
85#define IRQ_EINT23 S3C2410_IRQ(51)
86
87
88#define IRQ_EINT(x) (((x) >= 4) ? (IRQ_EINT4 + (x) - 4) : (IRQ_EINT0 + (x)))
89
90#define IRQ_LCD_FIFO S3C2410_IRQ(52)
91#define IRQ_LCD_FRAME S3C2410_IRQ(53)
92
93/* IRQs for the interal UARTs, and ADC
94 * these need to be ordered in number of appearance in the
95 * SUBSRC mask register
96*/
97
98#define S3C2410_IRQSUB(x) S3C2410_IRQ((x)+54)
99
100#define IRQ_S3CUART_RX0 S3C2410_IRQSUB(0) /* 70 */
101#define IRQ_S3CUART_TX0 S3C2410_IRQSUB(1)
102#define IRQ_S3CUART_ERR0 S3C2410_IRQSUB(2)
103
104#define IRQ_S3CUART_RX1 S3C2410_IRQSUB(3) /* 73 */
105#define IRQ_S3CUART_TX1 S3C2410_IRQSUB(4)
106#define IRQ_S3CUART_ERR1 S3C2410_IRQSUB(5)
107
108#define IRQ_S3CUART_RX2 S3C2410_IRQSUB(6) /* 76 */
109#define IRQ_S3CUART_TX2 S3C2410_IRQSUB(7)
110#define IRQ_S3CUART_ERR2 S3C2410_IRQSUB(8)
111
112#define IRQ_TC S3C2410_IRQSUB(9)
113#define IRQ_ADC S3C2410_IRQSUB(10)
114
115/* extra irqs for s3c2412 */
116
117#define IRQ_S3C2412_CFSDI S3C2410_IRQ(21)
118
119#define IRQ_S3C2412_SDI S3C2410_IRQSUB(13)
120#define IRQ_S3C2412_CF S3C2410_IRQSUB(14)
121
122/* extra irqs for s3c2440 */
123
124#define IRQ_S3C2440_CAM_C S3C2410_IRQSUB(11) /* S3C2443 too */
125#define IRQ_S3C2440_CAM_P S3C2410_IRQSUB(12) /* S3C2443 too */
126#define IRQ_S3C2440_WDT S3C2410_IRQSUB(13)
127#define IRQ_S3C2440_AC97 S3C2410_IRQSUB(14)
128
129/* irqs for s3c2443 */
130
131#define IRQ_S3C2443_DMA S3C2410_IRQ(17) /* IRQ_DMA1 */
132#define IRQ_S3C2443_UART3 S3C2410_IRQ(18) /* IRQ_DMA2 */
133#define IRQ_S3C2443_CFCON S3C2410_IRQ(19) /* IRQ_DMA3 */
134#define IRQ_S3C2443_HSMMC S3C2410_IRQ(20) /* IRQ_SDI */
135#define IRQ_S3C2443_NAND S3C2410_IRQ(24) /* reserved */
136
137#define IRQ_S3C2443_LCD1 S3C2410_IRQSUB(14)
138#define IRQ_S3C2443_LCD2 S3C2410_IRQSUB(15)
139#define IRQ_S3C2443_LCD3 S3C2410_IRQSUB(16)
140#define IRQ_S3C2443_LCD4 S3C2410_IRQSUB(17)
141
142#define IRQ_S3C2443_DMA0 S3C2410_IRQSUB(18)
143#define IRQ_S3C2443_DMA1 S3C2410_IRQSUB(19)
144#define IRQ_S3C2443_DMA2 S3C2410_IRQSUB(20)
145#define IRQ_S3C2443_DMA3 S3C2410_IRQSUB(21)
146#define IRQ_S3C2443_DMA4 S3C2410_IRQSUB(22)
147#define IRQ_S3C2443_DMA5 S3C2410_IRQSUB(23)
148
149/* UART3 */
150#define IRQ_S3C2443_RX3 S3C2410_IRQSUB(24)
151#define IRQ_S3C2443_TX3 S3C2410_IRQSUB(25)
152#define IRQ_S3C2443_ERR3 S3C2410_IRQSUB(26)
153
154#define IRQ_S3C2443_WDT S3C2410_IRQSUB(27)
155#define IRQ_S3C2443_AC97 S3C2410_IRQSUB(28)
156
157#ifdef CONFIG_CPU_S3C2443
158#define NR_IRQS (IRQ_S3C2443_AC97+1)
159#else
160#define NR_IRQS (IRQ_S3C2440_AC97+1)
161#endif
162
163/* Our FIQs are routable from IRQ_EINT0 to IRQ_ADCPARENT */
164#define FIQ_START IRQ_EINT0
165
166#endif /* __ASM_ARCH_IRQ_H */
diff --git a/include/asm-arm/arch-s3c2410/leds-gpio.h b/include/asm-arm/arch-s3c2410/leds-gpio.h
deleted file mode 100644
index 800846ebddba..000000000000
--- a/include/asm-arm/arch-s3c2410/leds-gpio.h
+++ /dev/null
@@ -1,28 +0,0 @@
1/* linux/include/asm-arm/arch-s3c2410/leds-gpio.h
2 *
3 * Copyright (c) 2006 Simtec Electronics
4 * http://armlinux.simtec.co.uk/
5 * Ben Dooks <ben@simtec.co.uk>
6 *
7 * S3C24XX - LEDs GPIO connector
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
12*/
13
14#ifndef __ASM_ARCH_LEDSGPIO_H
15#define __ASM_ARCH_LEDSGPIO_H "leds-gpio.h"
16
17#define S3C24XX_LEDF_ACTLOW (1<<0) /* LED is on when GPIO low */
18#define S3C24XX_LEDF_TRISTATE (1<<1) /* tristate to turn off */
19
20struct s3c24xx_led_platdata {
21 unsigned int gpio;
22 unsigned int flags;
23
24 char *name;
25 char *def_trigger;
26};
27
28#endif /* __ASM_ARCH_LEDSGPIO_H */
diff --git a/include/asm-arm/arch-s3c2410/map.h b/include/asm-arm/arch-s3c2410/map.h
deleted file mode 100644
index b33ed3b05ef5..000000000000
--- a/include/asm-arm/arch-s3c2410/map.h
+++ /dev/null
@@ -1,178 +0,0 @@
1/* linux/include/asm-arm/arch-s3c2410/map.h
2 *
3 * Copyright (c) 2003 Simtec Electronics
4 * Ben Dooks <ben@simtec.co.uk>
5 *
6 * S3C2410 - Memory map definitions
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
11*/
12
13#ifndef __ASM_ARCH_MAP_H
14#define __ASM_ARCH_MAP_H
15
16#include <asm/plat-s3c/map.h>
17
18#define S3C2410_ADDR(x) S3C_ADDR(x)
19
20/* interrupt controller is the first thing we put in, to make
21 * the assembly code for the irq detection easier
22 */
23#define S3C24XX_VA_IRQ S3C_VA_IRQ
24#define S3C2410_PA_IRQ (0x4A000000)
25#define S3C24XX_SZ_IRQ SZ_1M
26
27/* memory controller registers */
28#define S3C24XX_VA_MEMCTRL S3C_VA_MEM
29#define S3C2410_PA_MEMCTRL (0x48000000)
30#define S3C24XX_SZ_MEMCTRL SZ_1M
31
32/* USB host controller */
33#define S3C2410_PA_USBHOST (0x49000000)
34#define S3C24XX_SZ_USBHOST SZ_1M
35
36/* DMA controller */
37#define S3C2410_PA_DMA (0x4B000000)
38#define S3C24XX_SZ_DMA SZ_1M
39
40/* Clock and Power management */
41#define S3C24XX_VA_CLKPWR S3C_VA_SYS
42#define S3C2410_PA_CLKPWR (0x4C000000)
43#define S3C24XX_SZ_CLKPWR SZ_1M
44
45/* LCD controller */
46#define S3C2410_PA_LCD (0x4D000000)
47#define S3C24XX_SZ_LCD SZ_1M
48
49/* NAND flash controller */
50#define S3C2410_PA_NAND (0x4E000000)
51#define S3C24XX_SZ_NAND SZ_1M
52
53/* UARTs */
54#define S3C24XX_VA_UART S3C_VA_UART
55#define S3C2410_PA_UART (0x50000000)
56#define S3C24XX_SZ_UART SZ_1M
57
58/* Timers */
59#define S3C24XX_VA_TIMER S3C_VA_TIMER
60#define S3C2410_PA_TIMER (0x51000000)
61#define S3C24XX_SZ_TIMER SZ_1M
62
63/* USB Device port */
64#define S3C2410_PA_USBDEV (0x52000000)
65#define S3C24XX_SZ_USBDEV SZ_1M
66
67/* Watchdog */
68#define S3C24XX_VA_WATCHDOG S3C_VA_WATCHDOG
69#define S3C2410_PA_WATCHDOG (0x53000000)
70#define S3C24XX_SZ_WATCHDOG SZ_1M
71
72/* IIC hardware controller */
73#define S3C2410_PA_IIC (0x54000000)
74#define S3C24XX_SZ_IIC SZ_1M
75
76/* IIS controller */
77#define S3C2410_PA_IIS (0x55000000)
78#define S3C24XX_SZ_IIS SZ_1M
79
80/* GPIO ports */
81
82/* the calculation for the VA of this must ensure that
83 * it is the same distance apart from the UART in the
84 * phsyical address space, as the initial mapping for the IO
85 * is done as a 1:1 maping. This puts it (currently) at
86 * 0xFA800000, which is not in the way of any current mapping
87 * by the base system.
88*/
89
90#define S3C2410_PA_GPIO (0x56000000)
91#define S3C24XX_VA_GPIO ((S3C2410_PA_GPIO - S3C24XX_PA_UART) + S3C24XX_VA_UART)
92#define S3C24XX_SZ_GPIO SZ_1M
93
94/* RTC */
95#define S3C2410_PA_RTC (0x57000000)
96#define S3C24XX_SZ_RTC SZ_1M
97
98/* ADC */
99#define S3C2410_PA_ADC (0x58000000)
100#define S3C24XX_SZ_ADC SZ_1M
101
102/* SPI */
103#define S3C2410_PA_SPI (0x59000000)
104#define S3C24XX_SZ_SPI SZ_1M
105
106/* SDI */
107#define S3C2410_PA_SDI (0x5A000000)
108#define S3C24XX_SZ_SDI SZ_1M
109
110/* CAMIF */
111#define S3C2440_PA_CAMIF (0x4F000000)
112#define S3C2440_SZ_CAMIF SZ_1M
113
114/* AC97 */
115
116#define S3C2440_PA_AC97 (0x5B000000)
117#define S3C2440_SZ_AC97 SZ_1M
118
119/* S3C2443 High-speed SD/MMC */
120#define S3C2443_PA_HSMMC (0x4A800000)
121#define S3C2443_SZ_HSMMC (256)
122
123/* ISA style IO, for each machine to sort out mappings for, if it
124 * implements it. We reserve two 16M regions for ISA.
125 */
126
127#define S3C24XX_VA_ISA_WORD S3C2410_ADDR(0x02000000)
128#define S3C24XX_VA_ISA_BYTE S3C2410_ADDR(0x03000000)
129
130/* physical addresses of all the chip-select areas */
131
132#define S3C2410_CS0 (0x00000000)
133#define S3C2410_CS1 (0x08000000)
134#define S3C2410_CS2 (0x10000000)
135#define S3C2410_CS3 (0x18000000)
136#define S3C2410_CS4 (0x20000000)
137#define S3C2410_CS5 (0x28000000)
138#define S3C2410_CS6 (0x30000000)
139#define S3C2410_CS7 (0x38000000)
140
141#define S3C2410_SDRAM_PA (S3C2410_CS6)
142
143/* Use a single interface for common resources between S3C24XX cpus */
144
145#define S3C24XX_PA_IRQ S3C2410_PA_IRQ
146#define S3C24XX_PA_MEMCTRL S3C2410_PA_MEMCTRL
147#define S3C24XX_PA_USBHOST S3C2410_PA_USBHOST
148#define S3C24XX_PA_DMA S3C2410_PA_DMA
149#define S3C24XX_PA_CLKPWR S3C2410_PA_CLKPWR
150#define S3C24XX_PA_LCD S3C2410_PA_LCD
151#define S3C24XX_PA_UART S3C2410_PA_UART
152#define S3C24XX_PA_TIMER S3C2410_PA_TIMER
153#define S3C24XX_PA_USBDEV S3C2410_PA_USBDEV
154#define S3C24XX_PA_WATCHDOG S3C2410_PA_WATCHDOG
155#define S3C24XX_PA_IIC S3C2410_PA_IIC
156#define S3C24XX_PA_IIS S3C2410_PA_IIS
157#define S3C24XX_PA_GPIO S3C2410_PA_GPIO
158#define S3C24XX_PA_RTC S3C2410_PA_RTC
159#define S3C24XX_PA_ADC S3C2410_PA_ADC
160#define S3C24XX_PA_SPI S3C2410_PA_SPI
161
162/* deal with the registers that move under the 2412/2413 */
163
164#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413)
165#ifndef __ASSEMBLY__
166extern void __iomem *s3c24xx_va_gpio2;
167#endif
168#ifdef CONFIG_CPU_S3C2412_ONLY
169#define S3C24XX_VA_GPIO2 (S3C24XX_VA_GPIO + 0x10)
170#else
171#define S3C24XX_VA_GPIO2 s3c24xx_va_gpio2
172#endif
173#else
174#define s3c24xx_va_gpio2 S3C24XX_VA_GPIO
175#define S3C24XX_VA_GPIO2 S3C24XX_VA_GPIO
176#endif
177
178#endif /* __ASM_ARCH_MAP_H */
diff --git a/include/asm-arm/arch-s3c2410/memory.h b/include/asm-arm/arch-s3c2410/memory.h
deleted file mode 100644
index 533e2436e707..000000000000
--- a/include/asm-arm/arch-s3c2410/memory.h
+++ /dev/null
@@ -1,19 +0,0 @@
1/* linux/include/asm-arm/arch-s3c2410/memory.h
2 * from linux/include/asm-arm/arch-rpc/memory.h
3 *
4 * Copyright (C) 1996,1997,1998 Russell King.
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
9*/
10
11#ifndef __ASM_ARCH_MEMORY_H
12#define __ASM_ARCH_MEMORY_H
13
14#define PHYS_OFFSET UL(0x30000000)
15
16#define __virt_to_bus(x) __virt_to_phys(x)
17#define __bus_to_virt(x) __phys_to_virt(x)
18
19#endif
diff --git a/include/asm-arm/arch-s3c2410/osiris-cpld.h b/include/asm-arm/arch-s3c2410/osiris-cpld.h
deleted file mode 100644
index 229ab2351db6..000000000000
--- a/include/asm-arm/arch-s3c2410/osiris-cpld.h
+++ /dev/null
@@ -1,30 +0,0 @@
1/* linux/include/asm-arm/arch-s3c2410/osiris-cpld.h
2 *
3 * Copyright 2005 Simtec Electronics
4 * http://www.simtec.co.uk/products/
5 * Ben Dooks <ben@simtec.co.uk>
6 *
7 * OSIRIS - CPLD control constants
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
12*/
13
14#ifndef __ASM_ARCH_OSIRISCPLD_H
15#define __ASM_ARCH_OSIRISCPLD_H
16
17/* CTRL0 - NAND WP control */
18
19#define OSIRIS_CTRL0_NANDSEL (0x3)
20#define OSIRIS_CTRL0_BOOT_INT (1<<3)
21#define OSIRIS_CTRL0_PCMCIA (1<<4)
22#define OSIRIS_CTRL0_FIX8 (1<<5)
23#define OSIRIS_CTRL0_PCMCIA_nWAIT (1<<6)
24#define OSIRIS_CTRL0_PCMCIA_nIOIS16 (1<<7)
25
26#define OSIRIS_CTRL1_FIX8 (1<<0)
27
28#define OSIRIS_ID_REVMASK (0x7)
29
30#endif /* __ASM_ARCH_OSIRISCPLD_H */
diff --git a/include/asm-arm/arch-s3c2410/osiris-map.h b/include/asm-arm/arch-s3c2410/osiris-map.h
deleted file mode 100644
index b5c74d2b9aaa..000000000000
--- a/include/asm-arm/arch-s3c2410/osiris-map.h
+++ /dev/null
@@ -1,42 +0,0 @@
1/* linux/include/asm-arm/arch-s3c2410/osiris-map.h
2 *
3 * (c) 2005 Simtec Electronics
4 * http://www.simtec.co.uk/products/
5 * Ben Dooks <ben@simtec.co.uk>
6 *
7 * OSIRIS - Memory map definitions
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
12*/
13
14/* needs arch/map.h including with this */
15
16#ifndef __ASM_ARCH_OSIRISMAP_H
17#define __ASM_ARCH_OSIRISMAP_H
18
19/* start peripherals off after the S3C2410 */
20
21#define OSIRIS_IOADDR(x) (S3C2410_ADDR((x) + 0x04000000))
22
23#define OSIRIS_PA_CPLD (S3C2410_CS1 | (1<<26))
24
25/* we put the CPLD registers next, to get them out of the way */
26
27#define OSIRIS_VA_CTRL0 OSIRIS_IOADDR(0x00000000)
28#define OSIRIS_PA_CTRL0 (OSIRIS_PA_CPLD)
29
30#define OSIRIS_VA_CTRL1 OSIRIS_IOADDR(0x00100000)
31#define OSIRIS_PA_CTRL1 (OSIRIS_PA_CPLD + (1<<23))
32
33#define OSIRIS_VA_CTRL2 OSIRIS_IOADDR(0x00200000)
34#define OSIRIS_PA_CTRL2 (OSIRIS_PA_CPLD + (2<<23))
35
36#define OSIRIS_VA_CTRL3 OSIRIS_IOADDR(0x00300000)
37#define OSIRIS_PA_CTRL3 (OSIRIS_PA_CPLD + (2<<23))
38
39#define OSIRIS_VA_IDREG OSIRIS_IOADDR(0x00700000)
40#define OSIRIS_PA_IDREG (OSIRIS_PA_CPLD + (7<<23))
41
42#endif /* __ASM_ARCH_OSIRISMAP_H */
diff --git a/include/asm-arm/arch-s3c2410/otom-map.h b/include/asm-arm/arch-s3c2410/otom-map.h
deleted file mode 100644
index e40c93429854..000000000000
--- a/include/asm-arm/arch-s3c2410/otom-map.h
+++ /dev/null
@@ -1,30 +0,0 @@
1/* linux/include/asm-arm/arch-s3c2410/otom-map.h
2 *
3 * (c) 2005 Guillaume GOURAT / NexVision
4 * guillaume.gourat@nexvision.fr
5 *
6 * NexVision OTOM board memory map definitions
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
11*/
12
13/* needs arch/map.h including with this */
14
15/* ok, we've used up to 0x01300000, now we need to find space for the
16 * peripherals that live in the nGCS[x] areas, which are quite numerous
17 * in their space.
18 */
19
20#ifndef __ASM_ARCH_OTOMMAP_H
21#define __ASM_ARCH_OTOMMAP_H
22
23#define OTOM_PA_CS8900A_BASE (S3C2410_CS3 + 0x01000000) /* nGCS3 +0x01000000 */
24#define OTOM_VA_CS8900A_BASE S3C2410_ADDR(0x04000000) /* 0xF4000000 */
25
26/* physical offset addresses for the peripherals */
27
28#define OTOM_PA_FLASH0_BASE (S3C2410_CS0) /* Bank 0 */
29
30#endif /* __ASM_ARCH_OTOMMAP_H */
diff --git a/include/asm-arm/arch-s3c2410/regs-clock.h b/include/asm-arm/arch-s3c2410/regs-clock.h
deleted file mode 100644
index 37661358b42b..000000000000
--- a/include/asm-arm/arch-s3c2410/regs-clock.h
+++ /dev/null
@@ -1,197 +0,0 @@
1/* linux/include/asm-arm/arch-s3c2410/regs-clock.h
2 *
3 * Copyright (c) 2003,2004,2005,2006 Simtec Electronics <linux@simtec.co.uk>
4 * http://armlinux.simtec.co.uk/
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
9 *
10 * S3C2410 clock register definitions
11*/
12
13#ifndef __ASM_ARM_REGS_CLOCK
14#define __ASM_ARM_REGS_CLOCK "$Id: clock.h,v 1.4 2003/04/30 14:50:51 ben Exp $"
15
16#define S3C2410_CLKREG(x) ((x) + S3C24XX_VA_CLKPWR)
17
18#define S3C2410_PLLVAL(_m,_p,_s) ((_m) << 12 | ((_p) << 4) | ((_s)))
19
20#define S3C2410_LOCKTIME S3C2410_CLKREG(0x00)
21#define S3C2410_MPLLCON S3C2410_CLKREG(0x04)
22#define S3C2410_UPLLCON S3C2410_CLKREG(0x08)
23#define S3C2410_CLKCON S3C2410_CLKREG(0x0C)
24#define S3C2410_CLKSLOW S3C2410_CLKREG(0x10)
25#define S3C2410_CLKDIVN S3C2410_CLKREG(0x14)
26
27#define S3C2410_CLKCON_IDLE (1<<2)
28#define S3C2410_CLKCON_POWER (1<<3)
29#define S3C2410_CLKCON_NAND (1<<4)
30#define S3C2410_CLKCON_LCDC (1<<5)
31#define S3C2410_CLKCON_USBH (1<<6)
32#define S3C2410_CLKCON_USBD (1<<7)
33#define S3C2410_CLKCON_PWMT (1<<8)
34#define S3C2410_CLKCON_SDI (1<<9)
35#define S3C2410_CLKCON_UART0 (1<<10)
36#define S3C2410_CLKCON_UART1 (1<<11)
37#define S3C2410_CLKCON_UART2 (1<<12)
38#define S3C2410_CLKCON_GPIO (1<<13)
39#define S3C2410_CLKCON_RTC (1<<14)
40#define S3C2410_CLKCON_ADC (1<<15)
41#define S3C2410_CLKCON_IIC (1<<16)
42#define S3C2410_CLKCON_IIS (1<<17)
43#define S3C2410_CLKCON_SPI (1<<18)
44
45#define S3C2410_PLLCON_MDIVSHIFT 12
46#define S3C2410_PLLCON_PDIVSHIFT 4
47#define S3C2410_PLLCON_SDIVSHIFT 0
48#define S3C2410_PLLCON_MDIVMASK ((1<<(1+(19-12)))-1)
49#define S3C2410_PLLCON_PDIVMASK ((1<<5)-1)
50#define S3C2410_PLLCON_SDIVMASK 3
51
52/* DCLKCON register addresses in gpio.h */
53
54#define S3C2410_DCLKCON_DCLK0EN (1<<0)
55#define S3C2410_DCLKCON_DCLK0_PCLK (0<<1)
56#define S3C2410_DCLKCON_DCLK0_UCLK (1<<1)
57#define S3C2410_DCLKCON_DCLK0_DIV(x) (((x) - 1 )<<4)
58#define S3C2410_DCLKCON_DCLK0_CMP(x) (((x) - 1 )<<8)
59#define S3C2410_DCLKCON_DCLK0_DIV_MASK ((0xf)<<4)
60#define S3C2410_DCLKCON_DCLK0_CMP_MASK ((0xf)<<8)
61
62#define S3C2410_DCLKCON_DCLK1EN (1<<16)
63#define S3C2410_DCLKCON_DCLK1_PCLK (0<<17)
64#define S3C2410_DCLKCON_DCLK1_UCLK (1<<17)
65#define S3C2410_DCLKCON_DCLK1_DIV(x) (((x) - 1) <<20)
66#define S3C2410_DCLKCON_DCLK1_CMP(x) (((x) - 1) <<24)
67#define S3C2410_DCLKCON_DCLK1_DIV_MASK ((0xf) <<20)
68#define S3C2410_DCLKCON_DCLK1_CMP_MASK ((0xf) <<24)
69
70#define S3C2410_CLKDIVN_PDIVN (1<<0)
71#define S3C2410_CLKDIVN_HDIVN (1<<1)
72
73#define S3C2410_CLKSLOW_UCLK_OFF (1<<7)
74#define S3C2410_CLKSLOW_MPLL_OFF (1<<5)
75#define S3C2410_CLKSLOW_SLOW (1<<4)
76#define S3C2410_CLKSLOW_SLOWVAL(x) (x)
77#define S3C2410_CLKSLOW_GET_SLOWVAL(x) ((x) & 7)
78
79#ifndef __ASSEMBLY__
80
81#include <asm/div64.h>
82
83static inline unsigned int
84s3c2410_get_pll(unsigned int pllval, unsigned int baseclk)
85{
86 unsigned int mdiv, pdiv, sdiv;
87 uint64_t fvco;
88
89 mdiv = pllval >> S3C2410_PLLCON_MDIVSHIFT;
90 pdiv = pllval >> S3C2410_PLLCON_PDIVSHIFT;
91 sdiv = pllval >> S3C2410_PLLCON_SDIVSHIFT;
92
93 mdiv &= S3C2410_PLLCON_MDIVMASK;
94 pdiv &= S3C2410_PLLCON_PDIVMASK;
95 sdiv &= S3C2410_PLLCON_SDIVMASK;
96
97 fvco = (uint64_t)baseclk * (mdiv + 8);
98 do_div(fvco, (pdiv + 2) << sdiv);
99
100 return (unsigned int)fvco;
101}
102
103#endif /* __ASSEMBLY__ */
104
105#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
106
107/* extra registers */
108#define S3C2440_CAMDIVN S3C2410_CLKREG(0x18)
109
110#define S3C2440_CLKCON_CAMERA (1<<19)
111#define S3C2440_CLKCON_AC97 (1<<20)
112
113#define S3C2440_CLKDIVN_PDIVN (1<<0)
114#define S3C2440_CLKDIVN_HDIVN_MASK (3<<1)
115#define S3C2440_CLKDIVN_HDIVN_1 (0<<1)
116#define S3C2440_CLKDIVN_HDIVN_2 (1<<1)
117#define S3C2440_CLKDIVN_HDIVN_4_8 (2<<1)
118#define S3C2440_CLKDIVN_HDIVN_3_6 (3<<1)
119#define S3C2440_CLKDIVN_UCLK (1<<3)
120
121#define S3C2440_CAMDIVN_CAMCLK_MASK (0xf<<0)
122#define S3C2440_CAMDIVN_CAMCLK_SEL (1<<4)
123#define S3C2440_CAMDIVN_HCLK3_HALF (1<<8)
124#define S3C2440_CAMDIVN_HCLK4_HALF (1<<9)
125#define S3C2440_CAMDIVN_DVSEN (1<<12)
126
127#define S3C2442_CAMDIVN_CAMCLK_DIV3 (1<<5)
128
129#endif /* CONFIG_CPU_S3C2440 or CONFIG_CPU_S3C2442 */
130
131#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413)
132
133#define S3C2412_OSCSET S3C2410_CLKREG(0x18)
134#define S3C2412_CLKSRC S3C2410_CLKREG(0x1C)
135
136#define S3C2412_PLLCON_OFF (1<<20)
137
138#define S3C2412_CLKDIVN_PDIVN (1<<2)
139#define S3C2412_CLKDIVN_HDIVN_MASK (3<<0)
140#define S3C2412_CLKDIVN_ARMDIVN (1<<3)
141#define S3C2412_CLKDIVN_DVSEN (1<<4)
142#define S3C2412_CLKDIVN_HALFHCLK (1<<5)
143#define S3C2412_CLKDIVN_USB48DIV (1<<6)
144#define S3C2412_CLKDIVN_UARTDIV_MASK (15<<8)
145#define S3C2412_CLKDIVN_UARTDIV_SHIFT (8)
146#define S3C2412_CLKDIVN_I2SDIV_MASK (15<<12)
147#define S3C2412_CLKDIVN_I2SDIV_SHIFT (12)
148#define S3C2412_CLKDIVN_CAMDIV_MASK (15<<16)
149#define S3C2412_CLKDIVN_CAMDIV_SHIFT (16)
150
151#define S3C2412_CLKCON_WDT (1<<28)
152#define S3C2412_CLKCON_SPI (1<<27)
153#define S3C2412_CLKCON_IIS (1<<26)
154#define S3C2412_CLKCON_IIC (1<<25)
155#define S3C2412_CLKCON_ADC (1<<24)
156#define S3C2412_CLKCON_RTC (1<<23)
157#define S3C2412_CLKCON_GPIO (1<<22)
158#define S3C2412_CLKCON_UART2 (1<<21)
159#define S3C2412_CLKCON_UART1 (1<<20)
160#define S3C2412_CLKCON_UART0 (1<<19)
161#define S3C2412_CLKCON_SDI (1<<18)
162#define S3C2412_CLKCON_PWMT (1<<17)
163#define S3C2412_CLKCON_USBD (1<<16)
164#define S3C2412_CLKCON_CAMCLK (1<<15)
165#define S3C2412_CLKCON_UARTCLK (1<<14)
166/* missing 13 */
167#define S3C2412_CLKCON_USB_HOST48 (1<<12)
168#define S3C2412_CLKCON_USB_DEV48 (1<<11)
169#define S3C2412_CLKCON_HCLKdiv2 (1<<10)
170#define S3C2412_CLKCON_HCLKx2 (1<<9)
171#define S3C2412_CLKCON_SDRAM (1<<8)
172/* missing 7 */
173#define S3C2412_CLKCON_USBH S3C2410_CLKCON_USBH
174#define S3C2412_CLKCON_LCDC S3C2410_CLKCON_LCDC
175#define S3C2412_CLKCON_NAND S3C2410_CLKCON_NAND
176#define S3C2412_CLKCON_DMA3 (1<<3)
177#define S3C2412_CLKCON_DMA2 (1<<2)
178#define S3C2412_CLKCON_DMA1 (1<<1)
179#define S3C2412_CLKCON_DMA0 (1<<0)
180
181/* clock sourec controls */
182
183#define S3C2412_CLKSRC_EXTCLKDIV_MASK (7 << 0)
184#define S3C2412_CLKSRC_EXTCLKDIV_SHIFT (0)
185#define S3C2412_CLKSRC_MDIVCLK_EXTCLKDIV (1<<3)
186#define S3C2412_CLKSRC_MSYSCLK_MPLL (1<<4)
187#define S3C2412_CLKSRC_USYSCLK_UPLL (1<<5)
188#define S3C2412_CLKSRC_UARTCLK_MPLL (1<<8)
189#define S3C2412_CLKSRC_I2SCLK_MPLL (1<<9)
190#define S3C2412_CLKSRC_USBCLK_HCLK (1<<10)
191#define S3C2412_CLKSRC_CAMCLK_HCLK (1<<11)
192#define S3C2412_CLKSRC_UREFCLK_EXTCLK (1<<12)
193#define S3C2412_CLKSRC_EREFCLK_EXTCLK (1<<14)
194
195#endif /* CONFIG_CPU_S3C2412 | CONFIG_CPU_S3C2413 */
196
197#endif /* __ASM_ARM_REGS_CLOCK */
diff --git a/include/asm-arm/arch-s3c2410/regs-dsc.h b/include/asm-arm/arch-s3c2410/regs-dsc.h
deleted file mode 100644
index 1235df70f34e..000000000000
--- a/include/asm-arm/arch-s3c2410/regs-dsc.h
+++ /dev/null
@@ -1,184 +0,0 @@
1/* linux/include/asm-arm/arch-s3c2410/regs-dsc.h
2 *
3 * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
4 * http://www.simtec.co.uk/products/SWLINUX/
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
9 *
10 * S3C2440/S3C2412 Signal Drive Strength Control
11*/
12
13
14#ifndef __ASM_ARCH_REGS_DSC_H
15#define __ASM_ARCH_REGS_DSC_H "2440-dsc"
16
17#if defined(CONFIG_CPU_S3C2412)
18#define S3C2412_DSC0 S3C2410_GPIOREG(0xdc)
19#define S3C2412_DSC1 S3C2410_GPIOREG(0xe0)
20#endif
21
22#if defined(CONFIG_CPU_S3C244X)
23
24#define S3C2440_DSC0 S3C2410_GPIOREG(0xc4)
25#define S3C2440_DSC1 S3C2410_GPIOREG(0xc8)
26
27#define S3C2440_SELECT_DSC0 (0)
28#define S3C2440_SELECT_DSC1 (1<<31)
29
30#define S3C2440_DSC_GETSHIFT(x) ((x) & 31)
31
32#define S3C2440_DSC0_DISABLE (1<<31)
33
34#define S3C2440_DSC0_ADDR (S3C2440_SELECT_DSC0 | 8)
35#define S3C2440_DSC0_ADDR_12mA (0<<8)
36#define S3C2440_DSC0_ADDR_10mA (1<<8)
37#define S3C2440_DSC0_ADDR_8mA (2<<8)
38#define S3C2440_DSC0_ADDR_6mA (3<<8)
39#define S3C2440_DSC0_ADDR_MASK (3<<8)
40
41/* D24..D31 */
42#define S3C2440_DSC0_DATA3 (S3C2440_SELECT_DSC0 | 6)
43#define S3C2440_DSC0_DATA3_12mA (0<<6)
44#define S3C2440_DSC0_DATA3_10mA (1<<6)
45#define S3C2440_DSC0_DATA3_8mA (2<<6)
46#define S3C2440_DSC0_DATA3_6mA (3<<6)
47#define S3C2440_DSC0_DATA3_MASK (3<<6)
48
49/* D16..D23 */
50#define S3C2440_DSC0_DATA2 (S3C2440_SELECT_DSC0 | 4)
51#define S3C2440_DSC0_DATA2_12mA (0<<4)
52#define S3C2440_DSC0_DATA2_10mA (1<<4)
53#define S3C2440_DSC0_DATA2_8mA (2<<4)
54#define S3C2440_DSC0_DATA2_6mA (3<<4)
55#define S3C2440_DSC0_DATA2_MASK (3<<4)
56
57/* D8..D15 */
58#define S3C2440_DSC0_DATA1 (S3C2440_SELECT_DSC0 | 2)
59#define S3C2440_DSC0_DATA1_12mA (0<<2)
60#define S3C2440_DSC0_DATA1_10mA (1<<2)
61#define S3C2440_DSC0_DATA1_8mA (2<<2)
62#define S3C2440_DSC0_DATA1_6mA (3<<2)
63#define S3C2440_DSC0_DATA1_MASK (3<<2)
64
65/* D0..D7 */
66#define S3C2440_DSC0_DATA0 (S3C2440_SELECT_DSC0 | 0)
67#define S3C2440_DSC0_DATA0_12mA (0<<0)
68#define S3C2440_DSC0_DATA0_10mA (1<<0)
69#define S3C2440_DSC0_DATA0_8mA (2<<0)
70#define S3C2440_DSC0_DATA0_6mA (3<<0)
71#define S3C2440_DSC0_DATA0_MASK (3<<0)
72
73#define S3C2440_DSC1_SCK1 (S3C2440_SELECT_DSC1 | 28)
74#define S3C2440_DSC1_SCK1_12mA (0<<28)
75#define S3C2440_DSC1_SCK1_10mA (1<<28)
76#define S3C2440_DSC1_SCK1_8mA (2<<28)
77#define S3C2440_DSC1_SCK1_6mA (3<<28)
78#define S3C2440_DSC1_SCK1_MASK (3<<28)
79
80#define S3C2440_DSC1_SCK0 (S3C2440_SELECT_DSC1 | 26)
81#define S3C2440_DSC1_SCK0_12mA (0<<26)
82#define S3C2440_DSC1_SCK0_10mA (1<<26)
83#define S3C2440_DSC1_SCK0_8mA (2<<26)
84#define S3C2440_DSC1_SCK0_6mA (3<<26)
85#define S3C2440_DSC1_SCK0_MASK (3<<26)
86
87#define S3C2440_DSC1_SCKE (S3C2440_SELECT_DSC1 | 24)
88#define S3C2440_DSC1_SCKE_10mA (0<<24)
89#define S3C2440_DSC1_SCKE_8mA (1<<24)
90#define S3C2440_DSC1_SCKE_6mA (2<<24)
91#define S3C2440_DSC1_SCKE_4mA (3<<24)
92#define S3C2440_DSC1_SCKE_MASK (3<<24)
93
94/* SDRAM nRAS/nCAS */
95#define S3C2440_DSC1_SDR (S3C2440_SELECT_DSC1 | 22)
96#define S3C2440_DSC1_SDR_10mA (0<<22)
97#define S3C2440_DSC1_SDR_8mA (1<<22)
98#define S3C2440_DSC1_SDR_6mA (2<<22)
99#define S3C2440_DSC1_SDR_4mA (3<<22)
100#define S3C2440_DSC1_SDR_MASK (3<<22)
101
102/* NAND Flash Controller */
103#define S3C2440_DSC1_NFC (S3C2440_SELECT_DSC1 | 20)
104#define S3C2440_DSC1_NFC_10mA (0<<20)
105#define S3C2440_DSC1_NFC_8mA (1<<20)
106#define S3C2440_DSC1_NFC_6mA (2<<20)
107#define S3C2440_DSC1_NFC_4mA (3<<20)
108#define S3C2440_DSC1_NFC_MASK (3<<20)
109
110/* nBE[0..3] */
111#define S3C2440_DSC1_nBE (S3C2440_SELECT_DSC1 | 18)
112#define S3C2440_DSC1_nBE_10mA (0<<18)
113#define S3C2440_DSC1_nBE_8mA (1<<18)
114#define S3C2440_DSC1_nBE_6mA (2<<18)
115#define S3C2440_DSC1_nBE_4mA (3<<18)
116#define S3C2440_DSC1_nBE_MASK (3<<18)
117
118#define S3C2440_DSC1_WOE (S3C2440_SELECT_DSC1 | 16)
119#define S3C2440_DSC1_WOE_10mA (0<<16)
120#define S3C2440_DSC1_WOE_8mA (1<<16)
121#define S3C2440_DSC1_WOE_6mA (2<<16)
122#define S3C2440_DSC1_WOE_4mA (3<<16)
123#define S3C2440_DSC1_WOE_MASK (3<<16)
124
125#define S3C2440_DSC1_CS7 (S3C2440_SELECT_DSC1 | 14)
126#define S3C2440_DSC1_CS7_10mA (0<<14)
127#define S3C2440_DSC1_CS7_8mA (1<<14)
128#define S3C2440_DSC1_CS7_6mA (2<<14)
129#define S3C2440_DSC1_CS7_4mA (3<<14)
130#define S3C2440_DSC1_CS7_MASK (3<<14)
131
132#define S3C2440_DSC1_CS6 (S3C2440_SELECT_DSC1 | 12)
133#define S3C2440_DSC1_CS6_10mA (0<<12)
134#define S3C2440_DSC1_CS6_8mA (1<<12)
135#define S3C2440_DSC1_CS6_6mA (2<<12)
136#define S3C2440_DSC1_CS6_4mA (3<<12)
137#define S3C2440_DSC1_CS6_MASK (3<<12)
138
139#define S3C2440_DSC1_CS5 (S3C2440_SELECT_DSC1 | 10)
140#define S3C2440_DSC1_CS5_10mA (0<<10)
141#define S3C2440_DSC1_CS5_8mA (1<<10)
142#define S3C2440_DSC1_CS5_6mA (2<<10)
143#define S3C2440_DSC1_CS5_4mA (3<<10)
144#define S3C2440_DSC1_CS5_MASK (3<<10)
145
146#define S3C2440_DSC1_CS4 (S3C2440_SELECT_DSC1 | 8)
147#define S3C2440_DSC1_CS4_10mA (0<<8)
148#define S3C2440_DSC1_CS4_8mA (1<<8)
149#define S3C2440_DSC1_CS4_6mA (2<<8)
150#define S3C2440_DSC1_CS4_4mA (3<<8)
151#define S3C2440_DSC1_CS4_MASK (3<<8)
152
153#define S3C2440_DSC1_CS3 (S3C2440_SELECT_DSC1 | 6)
154#define S3C2440_DSC1_CS3_10mA (0<<6)
155#define S3C2440_DSC1_CS3_8mA (1<<6)
156#define S3C2440_DSC1_CS3_6mA (2<<6)
157#define S3C2440_DSC1_CS3_4mA (3<<6)
158#define S3C2440_DSC1_CS3_MASK (3<<6)
159
160#define S3C2440_DSC1_CS2 (S3C2440_SELECT_DSC1 | 4)
161#define S3C2440_DSC1_CS2_10mA (0<<4)
162#define S3C2440_DSC1_CS2_8mA (1<<4)
163#define S3C2440_DSC1_CS2_6mA (2<<4)
164#define S3C2440_DSC1_CS2_4mA (3<<4)
165#define S3C2440_DSC1_CS2_MASK (3<<4)
166
167#define S3C2440_DSC1_CS1 (S3C2440_SELECT_DSC1 | 2)
168#define S3C2440_DSC1_CS1_10mA (0<<2)
169#define S3C2440_DSC1_CS1_8mA (1<<2)
170#define S3C2440_DSC1_CS1_6mA (2<<2)
171#define S3C2440_DSC1_CS1_4mA (3<<2)
172#define S3C2440_DSC1_CS1_MASK (3<<2)
173
174#define S3C2440_DSC1_CS0 (S3C2440_SELECT_DSC1 | 0)
175#define S3C2440_DSC1_CS0_10mA (0<<0)
176#define S3C2440_DSC1_CS0_8mA (1<<0)
177#define S3C2440_DSC1_CS0_6mA (2<<0)
178#define S3C2440_DSC1_CS0_4mA (3<<0)
179#define S3C2440_DSC1_CS0_MASK (3<<0)
180
181#endif /* CONFIG_CPU_S3C2440 */
182
183#endif /* __ASM_ARCH_REGS_DSC_H */
184
diff --git a/include/asm-arm/arch-s3c2410/regs-gpio.h b/include/asm-arm/arch-s3c2410/regs-gpio.h
deleted file mode 100644
index 497dd06e2c99..000000000000
--- a/include/asm-arm/arch-s3c2410/regs-gpio.h
+++ /dev/null
@@ -1,1163 +0,0 @@
1/* linux/include/asm-arm/arch-s3c2410/regs-gpio.h
2 *
3 * Copyright (c) 2003,2004 Simtec Electronics <linux@simtec.co.uk>
4 * http://www.simtec.co.uk/products/SWLINUX/
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
9 *
10 * S3C2410 GPIO register definitions
11*/
12
13
14#ifndef __ASM_ARCH_REGS_GPIO_H
15#define __ASM_ARCH_REGS_GPIO_H "$Id: gpio.h,v 1.5 2003/05/19 12:51:08 ben Exp $"
16
17#define S3C2410_GPIONO(bank,offset) ((bank) + (offset))
18
19#define S3C2410_GPIO_BANKA (32*0)
20#define S3C2410_GPIO_BANKB (32*1)
21#define S3C2410_GPIO_BANKC (32*2)
22#define S3C2410_GPIO_BANKD (32*3)
23#define S3C2410_GPIO_BANKE (32*4)
24#define S3C2410_GPIO_BANKF (32*5)
25#define S3C2410_GPIO_BANKG (32*6)
26#define S3C2410_GPIO_BANKH (32*7)
27
28#ifdef CONFIG_CPU_S3C2400
29#define S3C24XX_GPIO_BASE(x) S3C2400_GPIO_BASE(x)
30#define S3C24XX_MISCCR S3C2400_MISCCR
31#else
32#define S3C24XX_GPIO_BASE(x) S3C2410_GPIO_BASE(x)
33#define S3C24XX_MISCCR S3C24XX_GPIOREG2(0x80)
34#endif /* CONFIG_CPU_S3C2400 */
35
36
37/* S3C2400 doesn't have a 1:1 mapping to S3C2410 gpio base pins */
38
39#define S3C2400_BANKNUM(pin) (((pin) & ~31) / 32)
40#define S3C2400_BASEA2B(pin) ((((pin) & ~31) >> 2))
41#define S3C2400_BASEC2H(pin) ((S3C2400_BANKNUM(pin) * 10) + \
42 (2 * (S3C2400_BANKNUM(pin)-2)))
43
44#define S3C2400_GPIO_BASE(pin) (pin < S3C2410_GPIO_BANKC ? \
45 S3C2400_BASEA2B(pin)+S3C24XX_VA_GPIO : \
46 S3C2400_BASEC2H(pin)+S3C24XX_VA_GPIO)
47
48
49#define S3C2410_GPIO_BASE(pin) ((((pin) & ~31) >> 1) + S3C24XX_VA_GPIO)
50#define S3C2410_GPIO_OFFSET(pin) ((pin) & 31)
51
52/* general configuration options */
53
54#define S3C2410_GPIO_LEAVE (0xFFFFFFFF)
55#define S3C2410_GPIO_INPUT (0xFFFFFFF0) /* not available on A */
56#define S3C2410_GPIO_OUTPUT (0xFFFFFFF1)
57#define S3C2410_GPIO_IRQ (0xFFFFFFF2) /* not available for all */
58#define S3C2410_GPIO_SFN2 (0xFFFFFFF2) /* bank A => addr/cs/nand */
59#define S3C2410_GPIO_SFN3 (0xFFFFFFF3) /* not available on A */
60
61/* register address for the GPIO registers.
62 * S3C24XX_GPIOREG2 is for the second set of registers in the
63 * GPIO which move between s3c2410 and s3c2412 type systems */
64
65#define S3C2410_GPIOREG(x) ((x) + S3C24XX_VA_GPIO)
66#define S3C24XX_GPIOREG2(x) ((x) + S3C24XX_VA_GPIO2)
67
68
69/* configure GPIO ports A..G */
70
71/* port A - S3C2410: 22bits, zero in bit X makes pin X output
72 * S3C2400: 18bits, zero in bit X makes pin X output
73 * 1 makes port special function, this is default
74*/
75#define S3C2410_GPACON S3C2410_GPIOREG(0x00)
76#define S3C2410_GPADAT S3C2410_GPIOREG(0x04)
77
78#define S3C2400_GPACON S3C2410_GPIOREG(0x00)
79#define S3C2400_GPADAT S3C2410_GPIOREG(0x04)
80
81#define S3C2410_GPA0 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 0)
82#define S3C2410_GPA0_OUT (0<<0)
83#define S3C2410_GPA0_ADDR0 (1<<0)
84
85#define S3C2410_GPA1 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 1)
86#define S3C2410_GPA1_OUT (0<<1)
87#define S3C2410_GPA1_ADDR16 (1<<1)
88
89#define S3C2410_GPA2 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 2)
90#define S3C2410_GPA2_OUT (0<<2)
91#define S3C2410_GPA2_ADDR17 (1<<2)
92
93#define S3C2410_GPA3 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 3)
94#define S3C2410_GPA3_OUT (0<<3)
95#define S3C2410_GPA3_ADDR18 (1<<3)
96
97#define S3C2410_GPA4 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 4)
98#define S3C2410_GPA4_OUT (0<<4)
99#define S3C2410_GPA4_ADDR19 (1<<4)
100
101#define S3C2410_GPA5 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 5)
102#define S3C2410_GPA5_OUT (0<<5)
103#define S3C2410_GPA5_ADDR20 (1<<5)
104
105#define S3C2410_GPA6 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 6)
106#define S3C2410_GPA6_OUT (0<<6)
107#define S3C2410_GPA6_ADDR21 (1<<6)
108
109#define S3C2410_GPA7 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 7)
110#define S3C2410_GPA7_OUT (0<<7)
111#define S3C2410_GPA7_ADDR22 (1<<7)
112
113#define S3C2410_GPA8 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 8)
114#define S3C2410_GPA8_OUT (0<<8)
115#define S3C2410_GPA8_ADDR23 (1<<8)
116
117#define S3C2410_GPA9 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 9)
118#define S3C2410_GPA9_OUT (0<<9)
119#define S3C2410_GPA9_ADDR24 (1<<9)
120
121#define S3C2410_GPA10 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 10)
122#define S3C2410_GPA10_OUT (0<<10)
123#define S3C2410_GPA10_ADDR25 (1<<10)
124#define S3C2400_GPA10_SCKE (1<<10)
125
126#define S3C2410_GPA11 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 11)
127#define S3C2410_GPA11_OUT (0<<11)
128#define S3C2410_GPA11_ADDR26 (1<<11)
129#define S3C2400_GPA11_nCAS0 (1<<11)
130
131#define S3C2410_GPA12 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 12)
132#define S3C2410_GPA12_OUT (0<<12)
133#define S3C2410_GPA12_nGCS1 (1<<12)
134#define S3C2400_GPA12_nCAS1 (1<<12)
135
136#define S3C2410_GPA13 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 13)
137#define S3C2410_GPA13_OUT (0<<13)
138#define S3C2410_GPA13_nGCS2 (1<<13)
139#define S3C2400_GPA13_nGCS1 (1<<13)
140
141#define S3C2410_GPA14 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 14)
142#define S3C2410_GPA14_OUT (0<<14)
143#define S3C2410_GPA14_nGCS3 (1<<14)
144#define S3C2400_GPA14_nGCS2 (1<<14)
145
146#define S3C2410_GPA15 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 15)
147#define S3C2410_GPA15_OUT (0<<15)
148#define S3C2410_GPA15_nGCS4 (1<<15)
149#define S3C2400_GPA15_nGCS3 (1<<15)
150
151#define S3C2410_GPA16 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 16)
152#define S3C2410_GPA16_OUT (0<<16)
153#define S3C2410_GPA16_nGCS5 (1<<16)
154#define S3C2400_GPA16_nGCS4 (1<<16)
155
156#define S3C2410_GPA17 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 17)
157#define S3C2410_GPA17_OUT (0<<17)
158#define S3C2410_GPA17_CLE (1<<17)
159#define S3C2400_GPA17_nGCS5 (1<<17)
160
161#define S3C2410_GPA18 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 18)
162#define S3C2410_GPA18_OUT (0<<18)
163#define S3C2410_GPA18_ALE (1<<18)
164
165#define S3C2410_GPA19 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 19)
166#define S3C2410_GPA19_OUT (0<<19)
167#define S3C2410_GPA19_nFWE (1<<19)
168
169#define S3C2410_GPA20 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 20)
170#define S3C2410_GPA20_OUT (0<<20)
171#define S3C2410_GPA20_nFRE (1<<20)
172
173#define S3C2410_GPA21 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 21)
174#define S3C2410_GPA21_OUT (0<<21)
175#define S3C2410_GPA21_nRSTOUT (1<<21)
176
177#define S3C2410_GPA22 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 22)
178#define S3C2410_GPA22_OUT (0<<22)
179#define S3C2410_GPA22_nFCE (1<<22)
180
181/* 0x08 and 0x0c are reserved on S3C2410 */
182
183/* S3C2410:
184 * GPB is 10 IO pins, each configured by 2 bits each in GPBCON.
185 * 00 = input, 01 = output, 10=special function, 11=reserved
186
187 * S3C2400:
188 * GPB is 16 IO pins, each configured by 2 bits each in GPBCON.
189 * 00 = input, 01 = output, 10=data, 11=special function
190
191 * bit 0,1 = pin 0, 2,3= pin 1...
192 *
193 * CPBUP = pull up resistor control, 1=disabled, 0=enabled
194*/
195
196#define S3C2410_GPBCON S3C2410_GPIOREG(0x10)
197#define S3C2410_GPBDAT S3C2410_GPIOREG(0x14)
198#define S3C2410_GPBUP S3C2410_GPIOREG(0x18)
199
200#define S3C2400_GPBCON S3C2410_GPIOREG(0x08)
201#define S3C2400_GPBDAT S3C2410_GPIOREG(0x0C)
202#define S3C2400_GPBUP S3C2410_GPIOREG(0x10)
203
204/* no i/o pin in port b can have value 3 (unless it is a s3c2443) ! */
205
206#define S3C2410_GPB0 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 0)
207#define S3C2410_GPB0_INP (0x00 << 0)
208#define S3C2410_GPB0_OUTP (0x01 << 0)
209#define S3C2410_GPB0_TOUT0 (0x02 << 0)
210#define S3C2400_GPB0_DATA16 (0x02 << 0)
211
212#define S3C2410_GPB1 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 1)
213#define S3C2410_GPB1_INP (0x00 << 2)
214#define S3C2410_GPB1_OUTP (0x01 << 2)
215#define S3C2410_GPB1_TOUT1 (0x02 << 2)
216#define S3C2400_GPB1_DATA17 (0x02 << 2)
217
218#define S3C2410_GPB2 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 2)
219#define S3C2410_GPB2_INP (0x00 << 4)
220#define S3C2410_GPB2_OUTP (0x01 << 4)
221#define S3C2410_GPB2_TOUT2 (0x02 << 4)
222#define S3C2400_GPB2_DATA18 (0x02 << 4)
223#define S3C2400_GPB2_TCLK1 (0x03 << 4)
224
225#define S3C2410_GPB3 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 3)
226#define S3C2410_GPB3_INP (0x00 << 6)
227#define S3C2410_GPB3_OUTP (0x01 << 6)
228#define S3C2410_GPB3_TOUT3 (0x02 << 6)
229#define S3C2400_GPB3_DATA19 (0x02 << 6)
230#define S3C2400_GPB3_TXD1 (0x03 << 6)
231
232#define S3C2410_GPB4 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 4)
233#define S3C2410_GPB4_INP (0x00 << 8)
234#define S3C2410_GPB4_OUTP (0x01 << 8)
235#define S3C2410_GPB4_TCLK0 (0x02 << 8)
236#define S3C2400_GPB4_DATA20 (0x02 << 8)
237#define S3C2410_GPB4_MASK (0x03 << 8)
238#define S3C2400_GPB4_RXD1 (0x03 << 8)
239#define S3C2400_GPB4_MASK (0x03 << 8)
240
241#define S3C2410_GPB5 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 5)
242#define S3C2410_GPB5_INP (0x00 << 10)
243#define S3C2410_GPB5_OUTP (0x01 << 10)
244#define S3C2410_GPB5_nXBACK (0x02 << 10)
245#define S3C2443_GPB5_XBACK (0x03 << 10)
246#define S3C2400_GPB5_DATA21 (0x02 << 10)
247#define S3C2400_GPB5_nCTS1 (0x03 << 10)
248
249#define S3C2410_GPB6 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 6)
250#define S3C2410_GPB6_INP (0x00 << 12)
251#define S3C2410_GPB6_OUTP (0x01 << 12)
252#define S3C2410_GPB6_nXBREQ (0x02 << 12)
253#define S3C2443_GPB6_XBREQ (0x03 << 12)
254#define S3C2400_GPB6_DATA22 (0x02 << 12)
255#define S3C2400_GPB6_nRTS1 (0x03 << 12)
256
257#define S3C2410_GPB7 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 7)
258#define S3C2410_GPB7_INP (0x00 << 14)
259#define S3C2410_GPB7_OUTP (0x01 << 14)
260#define S3C2410_GPB7_nXDACK1 (0x02 << 14)
261#define S3C2443_GPB7_XDACK1 (0x03 << 14)
262#define S3C2400_GPB7_DATA23 (0x02 << 14)
263
264#define S3C2410_GPB8 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 8)
265#define S3C2410_GPB8_INP (0x00 << 16)
266#define S3C2410_GPB8_OUTP (0x01 << 16)
267#define S3C2410_GPB8_nXDREQ1 (0x02 << 16)
268#define S3C2400_GPB8_DATA24 (0x02 << 16)
269
270#define S3C2410_GPB9 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 9)
271#define S3C2410_GPB9_INP (0x00 << 18)
272#define S3C2410_GPB9_OUTP (0x01 << 18)
273#define S3C2410_GPB9_nXDACK0 (0x02 << 18)
274#define S3C2443_GPB9_XDACK0 (0x03 << 18)
275#define S3C2400_GPB9_DATA25 (0x02 << 18)
276#define S3C2400_GPB9_I2SSDI (0x03 << 18)
277
278#define S3C2410_GPB10 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 10)
279#define S3C2410_GPB10_INP (0x00 << 20)
280#define S3C2410_GPB10_OUTP (0x01 << 20)
281#define S3C2410_GPB10_nXDRE0 (0x02 << 20)
282#define S3C2443_GPB10_XDREQ0 (0x03 << 20)
283#define S3C2400_GPB10_DATA26 (0x02 << 20)
284#define S3C2400_GPB10_nSS (0x03 << 20)
285
286#define S3C2400_GPB11 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 11)
287#define S3C2400_GPB11_INP (0x00 << 22)
288#define S3C2400_GPB11_OUTP (0x01 << 22)
289#define S3C2400_GPB11_DATA27 (0x02 << 22)
290
291#define S3C2400_GPB12 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 12)
292#define S3C2400_GPB12_INP (0x00 << 24)
293#define S3C2400_GPB12_OUTP (0x01 << 24)
294#define S3C2400_GPB12_DATA28 (0x02 << 24)
295
296#define S3C2400_GPB13 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 13)
297#define S3C2400_GPB13_INP (0x00 << 26)
298#define S3C2400_GPB13_OUTP (0x01 << 26)
299#define S3C2400_GPB13_DATA29 (0x02 << 26)
300
301#define S3C2400_GPB14 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 14)
302#define S3C2400_GPB14_INP (0x00 << 28)
303#define S3C2400_GPB14_OUTP (0x01 << 28)
304#define S3C2400_GPB14_DATA30 (0x02 << 28)
305
306#define S3C2400_GPB15 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 15)
307#define S3C2400_GPB15_INP (0x00 << 30)
308#define S3C2400_GPB15_OUTP (0x01 << 30)
309#define S3C2400_GPB15_DATA31 (0x02 << 30)
310
311#define S3C2410_GPB_PUPDIS(x) (1<<(x))
312
313/* Port C consits of 16 GPIO/Special function
314 *
315 * almost identical setup to port b, but the special functions are mostly
316 * to do with the video system's sync/etc.
317*/
318
319#define S3C2410_GPCCON S3C2410_GPIOREG(0x20)
320#define S3C2410_GPCDAT S3C2410_GPIOREG(0x24)
321#define S3C2410_GPCUP S3C2410_GPIOREG(0x28)
322
323#define S3C2400_GPCCON S3C2410_GPIOREG(0x14)
324#define S3C2400_GPCDAT S3C2410_GPIOREG(0x18)
325#define S3C2400_GPCUP S3C2410_GPIOREG(0x1C)
326
327#define S3C2410_GPC0 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 0)
328#define S3C2410_GPC0_INP (0x00 << 0)
329#define S3C2410_GPC0_OUTP (0x01 << 0)
330#define S3C2410_GPC0_LEND (0x02 << 0)
331#define S3C2400_GPC0_VD0 (0x02 << 0)
332
333#define S3C2410_GPC1 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 1)
334#define S3C2410_GPC1_INP (0x00 << 2)
335#define S3C2410_GPC1_OUTP (0x01 << 2)
336#define S3C2410_GPC1_VCLK (0x02 << 2)
337#define S3C2400_GPC1_VD1 (0x02 << 2)
338
339#define S3C2410_GPC2 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 2)
340#define S3C2410_GPC2_INP (0x00 << 4)
341#define S3C2410_GPC2_OUTP (0x01 << 4)
342#define S3C2410_GPC2_VLINE (0x02 << 4)
343#define S3C2400_GPC2_VD2 (0x02 << 4)
344
345#define S3C2410_GPC3 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 3)
346#define S3C2410_GPC3_INP (0x00 << 6)
347#define S3C2410_GPC3_OUTP (0x01 << 6)
348#define S3C2410_GPC3_VFRAME (0x02 << 6)
349#define S3C2400_GPC3_VD3 (0x02 << 6)
350
351#define S3C2410_GPC4 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 4)
352#define S3C2410_GPC4_INP (0x00 << 8)
353#define S3C2410_GPC4_OUTP (0x01 << 8)
354#define S3C2410_GPC4_VM (0x02 << 8)
355#define S3C2400_GPC4_VD4 (0x02 << 8)
356
357#define S3C2410_GPC5 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 5)
358#define S3C2410_GPC5_INP (0x00 << 10)
359#define S3C2410_GPC5_OUTP (0x01 << 10)
360#define S3C2410_GPC5_LCDVF0 (0x02 << 10)
361#define S3C2400_GPC5_VD5 (0x02 << 10)
362
363#define S3C2410_GPC6 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 6)
364#define S3C2410_GPC6_INP (0x00 << 12)
365#define S3C2410_GPC6_OUTP (0x01 << 12)
366#define S3C2410_GPC6_LCDVF1 (0x02 << 12)
367#define S3C2400_GPC6_VD6 (0x02 << 12)
368
369#define S3C2410_GPC7 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 7)
370#define S3C2410_GPC7_INP (0x00 << 14)
371#define S3C2410_GPC7_OUTP (0x01 << 14)
372#define S3C2410_GPC7_LCDVF2 (0x02 << 14)
373#define S3C2400_GPC7_VD7 (0x02 << 14)
374
375#define S3C2410_GPC8 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 8)
376#define S3C2410_GPC8_INP (0x00 << 16)
377#define S3C2410_GPC8_OUTP (0x01 << 16)
378#define S3C2410_GPC8_VD0 (0x02 << 16)
379#define S3C2400_GPC8_VD8 (0x02 << 16)
380
381#define S3C2410_GPC9 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 9)
382#define S3C2410_GPC9_INP (0x00 << 18)
383#define S3C2410_GPC9_OUTP (0x01 << 18)
384#define S3C2410_GPC9_VD1 (0x02 << 18)
385#define S3C2400_GPC9_VD9 (0x02 << 18)
386
387#define S3C2410_GPC10 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 10)
388#define S3C2410_GPC10_INP (0x00 << 20)
389#define S3C2410_GPC10_OUTP (0x01 << 20)
390#define S3C2410_GPC10_VD2 (0x02 << 20)
391#define S3C2400_GPC10_VD10 (0x02 << 20)
392
393#define S3C2410_GPC11 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 11)
394#define S3C2410_GPC11_INP (0x00 << 22)
395#define S3C2410_GPC11_OUTP (0x01 << 22)
396#define S3C2410_GPC11_VD3 (0x02 << 22)
397#define S3C2400_GPC11_VD11 (0x02 << 22)
398
399#define S3C2410_GPC12 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 12)
400#define S3C2410_GPC12_INP (0x00 << 24)
401#define S3C2410_GPC12_OUTP (0x01 << 24)
402#define S3C2410_GPC12_VD4 (0x02 << 24)
403#define S3C2400_GPC12_VD12 (0x02 << 24)
404
405#define S3C2410_GPC13 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 13)
406#define S3C2410_GPC13_INP (0x00 << 26)
407#define S3C2410_GPC13_OUTP (0x01 << 26)
408#define S3C2410_GPC13_VD5 (0x02 << 26)
409#define S3C2400_GPC13_VD13 (0x02 << 26)
410
411#define S3C2410_GPC14 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 14)
412#define S3C2410_GPC14_INP (0x00 << 28)
413#define S3C2410_GPC14_OUTP (0x01 << 28)
414#define S3C2410_GPC14_VD6 (0x02 << 28)
415#define S3C2400_GPC14_VD14 (0x02 << 28)
416
417#define S3C2410_GPC15 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 15)
418#define S3C2410_GPC15_INP (0x00 << 30)
419#define S3C2410_GPC15_OUTP (0x01 << 30)
420#define S3C2410_GPC15_VD7 (0x02 << 30)
421#define S3C2400_GPC15_VD15 (0x02 << 30)
422
423#define S3C2410_GPC_PUPDIS(x) (1<<(x))
424
425/*
426 * S3C2410: Port D consists of 16 GPIO/Special function
427 *
428 * almost identical setup to port b, but the special functions are mostly
429 * to do with the video system's data.
430 *
431 * S3C2400: Port D consists of 11 GPIO/Special function
432 *
433 * almost identical setup to port c
434*/
435
436#define S3C2410_GPDCON S3C2410_GPIOREG(0x30)
437#define S3C2410_GPDDAT S3C2410_GPIOREG(0x34)
438#define S3C2410_GPDUP S3C2410_GPIOREG(0x38)
439
440#define S3C2400_GPDCON S3C2410_GPIOREG(0x20)
441#define S3C2400_GPDDAT S3C2410_GPIOREG(0x24)
442#define S3C2400_GPDUP S3C2410_GPIOREG(0x28)
443
444#define S3C2410_GPD0 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 0)
445#define S3C2410_GPD0_INP (0x00 << 0)
446#define S3C2410_GPD0_OUTP (0x01 << 0)
447#define S3C2410_GPD0_VD8 (0x02 << 0)
448#define S3C2400_GPD0_VFRAME (0x02 << 0)
449#define S3C2442_GPD0_nSPICS1 (0x03 << 0)
450
451#define S3C2410_GPD1 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 1)
452#define S3C2410_GPD1_INP (0x00 << 2)
453#define S3C2410_GPD1_OUTP (0x01 << 2)
454#define S3C2410_GPD1_VD9 (0x02 << 2)
455#define S3C2400_GPD1_VM (0x02 << 2)
456#define S3C2442_GPD1_SPICLK1 (0x03 << 2)
457
458#define S3C2410_GPD2 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 2)
459#define S3C2410_GPD2_INP (0x00 << 4)
460#define S3C2410_GPD2_OUTP (0x01 << 4)
461#define S3C2410_GPD2_VD10 (0x02 << 4)
462#define S3C2400_GPD2_VLINE (0x02 << 4)
463
464#define S3C2410_GPD3 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 3)
465#define S3C2410_GPD3_INP (0x00 << 6)
466#define S3C2410_GPD3_OUTP (0x01 << 6)
467#define S3C2410_GPD3_VD11 (0x02 << 6)
468#define S3C2400_GPD3_VCLK (0x02 << 6)
469
470#define S3C2410_GPD4 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 4)
471#define S3C2410_GPD4_INP (0x00 << 8)
472#define S3C2410_GPD4_OUTP (0x01 << 8)
473#define S3C2410_GPD4_VD12 (0x02 << 8)
474#define S3C2400_GPD4_LEND (0x02 << 8)
475
476#define S3C2410_GPD5 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 5)
477#define S3C2410_GPD5_INP (0x00 << 10)
478#define S3C2410_GPD5_OUTP (0x01 << 10)
479#define S3C2410_GPD5_VD13 (0x02 << 10)
480#define S3C2400_GPD5_TOUT0 (0x02 << 10)
481
482#define S3C2410_GPD6 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 6)
483#define S3C2410_GPD6_INP (0x00 << 12)
484#define S3C2410_GPD6_OUTP (0x01 << 12)
485#define S3C2410_GPD6_VD14 (0x02 << 12)
486#define S3C2400_GPD6_TOUT1 (0x02 << 12)
487
488#define S3C2410_GPD7 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 7)
489#define S3C2410_GPD7_INP (0x00 << 14)
490#define S3C2410_GPD7_OUTP (0x01 << 14)
491#define S3C2410_GPD7_VD15 (0x02 << 14)
492#define S3C2400_GPD7_TOUT2 (0x02 << 14)
493
494#define S3C2410_GPD8 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 8)
495#define S3C2410_GPD8_INP (0x00 << 16)
496#define S3C2410_GPD8_OUTP (0x01 << 16)
497#define S3C2410_GPD8_VD16 (0x02 << 16)
498#define S3C2400_GPD8_TOUT3 (0x02 << 16)
499
500#define S3C2410_GPD9 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 9)
501#define S3C2410_GPD9_INP (0x00 << 18)
502#define S3C2410_GPD9_OUTP (0x01 << 18)
503#define S3C2410_GPD9_VD17 (0x02 << 18)
504#define S3C2400_GPD9_TCLK0 (0x02 << 18)
505#define S3C2410_GPD9_MASK (0x03 << 18)
506
507#define S3C2410_GPD10 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 10)
508#define S3C2410_GPD10_INP (0x00 << 20)
509#define S3C2410_GPD10_OUTP (0x01 << 20)
510#define S3C2410_GPD10_VD18 (0x02 << 20)
511#define S3C2400_GPD10_nWAIT (0x02 << 20)
512
513#define S3C2410_GPD11 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 11)
514#define S3C2410_GPD11_INP (0x00 << 22)
515#define S3C2410_GPD11_OUTP (0x01 << 22)
516#define S3C2410_GPD11_VD19 (0x02 << 22)
517
518#define S3C2410_GPD12 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 12)
519#define S3C2410_GPD12_INP (0x00 << 24)
520#define S3C2410_GPD12_OUTP (0x01 << 24)
521#define S3C2410_GPD12_VD20 (0x02 << 24)
522
523#define S3C2410_GPD13 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 13)
524#define S3C2410_GPD13_INP (0x00 << 26)
525#define S3C2410_GPD13_OUTP (0x01 << 26)
526#define S3C2410_GPD13_VD21 (0x02 << 26)
527
528#define S3C2410_GPD14 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 14)
529#define S3C2410_GPD14_INP (0x00 << 28)
530#define S3C2410_GPD14_OUTP (0x01 << 28)
531#define S3C2410_GPD14_VD22 (0x02 << 28)
532#define S3C2410_GPD14_nSS1 (0x03 << 28)
533
534#define S3C2410_GPD15 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 15)
535#define S3C2410_GPD15_INP (0x00 << 30)
536#define S3C2410_GPD15_OUTP (0x01 << 30)
537#define S3C2410_GPD15_VD23 (0x02 << 30)
538#define S3C2410_GPD15_nSS0 (0x03 << 30)
539
540#define S3C2410_GPD_PUPDIS(x) (1<<(x))
541
542/* S3C2410:
543 * Port E consists of 16 GPIO/Special function
544 *
545 * again, the same as port B, but dealing with I2S, SDI, and
546 * more miscellaneous functions
547 *
548 * S3C2400:
549 * Port E consists of 12 GPIO/Special function
550 *
551 * GPIO / interrupt inputs
552*/
553
554#define S3C2410_GPECON S3C2410_GPIOREG(0x40)
555#define S3C2410_GPEDAT S3C2410_GPIOREG(0x44)
556#define S3C2410_GPEUP S3C2410_GPIOREG(0x48)
557
558#define S3C2400_GPECON S3C2410_GPIOREG(0x2C)
559#define S3C2400_GPEDAT S3C2410_GPIOREG(0x30)
560#define S3C2400_GPEUP S3C2410_GPIOREG(0x34)
561
562#define S3C2410_GPE0 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 0)
563#define S3C2410_GPE0_INP (0x00 << 0)
564#define S3C2410_GPE0_OUTP (0x01 << 0)
565#define S3C2410_GPE0_I2SLRCK (0x02 << 0)
566#define S3C2443_GPE0_AC_nRESET (0x03 << 0)
567#define S3C2400_GPE0_EINT0 (0x02 << 0)
568#define S3C2410_GPE0_MASK (0x03 << 0)
569
570#define S3C2410_GPE1 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 1)
571#define S3C2410_GPE1_INP (0x00 << 2)
572#define S3C2410_GPE1_OUTP (0x01 << 2)
573#define S3C2410_GPE1_I2SSCLK (0x02 << 2)
574#define S3C2443_GPE1_AC_SYNC (0x03 << 2)
575#define S3C2400_GPE1_EINT1 (0x02 << 2)
576#define S3C2400_GPE1_nSS (0x03 << 2)
577#define S3C2410_GPE1_MASK (0x03 << 2)
578
579#define S3C2410_GPE2 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 2)
580#define S3C2410_GPE2_INP (0x00 << 4)
581#define S3C2410_GPE2_OUTP (0x01 << 4)
582#define S3C2410_GPE2_CDCLK (0x02 << 4)
583#define S3C2443_GPE2_AC_BITCLK (0x03 << 4)
584#define S3C2400_GPE2_EINT2 (0x02 << 4)
585#define S3C2400_GPE2_I2SSDI (0x03 << 4)
586
587#define S3C2410_GPE3 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 3)
588#define S3C2410_GPE3_INP (0x00 << 6)
589#define S3C2410_GPE3_OUTP (0x01 << 6)
590#define S3C2410_GPE3_I2SSDI (0x02 << 6)
591#define S3C2443_GPE3_AC_SDI (0x03 << 6)
592#define S3C2400_GPE3_EINT3 (0x02 << 6)
593#define S3C2400_GPE3_nCTS1 (0x03 << 6)
594#define S3C2410_GPE3_nSS0 (0x03 << 6)
595#define S3C2410_GPE3_MASK (0x03 << 6)
596
597#define S3C2410_GPE4 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 4)
598#define S3C2410_GPE4_INP (0x00 << 8)
599#define S3C2410_GPE4_OUTP (0x01 << 8)
600#define S3C2410_GPE4_I2SSDO (0x02 << 8)
601#define S3C2443_GPE4_AC_SDO (0x03 << 8)
602#define S3C2400_GPE4_EINT4 (0x02 << 8)
603#define S3C2400_GPE4_nRTS1 (0x03 << 8)
604#define S3C2410_GPE4_I2SSDI (0x03 << 8)
605#define S3C2410_GPE4_MASK (0x03 << 8)
606
607#define S3C2410_GPE5 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 5)
608#define S3C2410_GPE5_INP (0x00 << 10)
609#define S3C2410_GPE5_OUTP (0x01 << 10)
610#define S3C2410_GPE5_SDCLK (0x02 << 10)
611#define S3C2443_GPE5_SD1_CLK (0x02 << 10)
612#define S3C2400_GPE5_EINT5 (0x02 << 10)
613#define S3C2400_GPE5_TCLK1 (0x03 << 10)
614
615#define S3C2410_GPE6 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 6)
616#define S3C2410_GPE6_INP (0x00 << 12)
617#define S3C2410_GPE6_OUTP (0x01 << 12)
618#define S3C2410_GPE6_SDCMD (0x02 << 12)
619#define S3C2443_GPE6_SD1_CMD (0x02 << 12)
620#define S3C2443_GPE6_AC_BITCLK (0x03 << 12)
621#define S3C2400_GPE6_EINT6 (0x02 << 12)
622
623#define S3C2410_GPE7 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 7)
624#define S3C2410_GPE7_INP (0x00 << 14)
625#define S3C2410_GPE7_OUTP (0x01 << 14)
626#define S3C2410_GPE7_SDDAT0 (0x02 << 14)
627#define S3C2443_GPE5_SD1_DAT0 (0x02 << 14)
628#define S3C2443_GPE7_AC_SDI (0x03 << 14)
629#define S3C2400_GPE7_EINT7 (0x02 << 14)
630
631#define S3C2410_GPE8 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 8)
632#define S3C2410_GPE8_INP (0x00 << 16)
633#define S3C2410_GPE8_OUTP (0x01 << 16)
634#define S3C2410_GPE8_SDDAT1 (0x02 << 16)
635#define S3C2443_GPE8_SD1_DAT1 (0x02 << 16)
636#define S3C2443_GPE8_AC_SDO (0x03 << 16)
637#define S3C2400_GPE8_nXDACK0 (0x02 << 16)
638
639#define S3C2410_GPE9 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 9)
640#define S3C2410_GPE9_INP (0x00 << 18)
641#define S3C2410_GPE9_OUTP (0x01 << 18)
642#define S3C2410_GPE9_SDDAT2 (0x02 << 18)
643#define S3C2443_GPE9_SD1_DAT2 (0x02 << 18)
644#define S3C2443_GPE9_AC_SYNC (0x03 << 18)
645#define S3C2400_GPE9_nXDACK1 (0x02 << 18)
646#define S3C2400_GPE9_nXBACK (0x03 << 18)
647
648#define S3C2410_GPE10 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 10)
649#define S3C2410_GPE10_INP (0x00 << 20)
650#define S3C2410_GPE10_OUTP (0x01 << 20)
651#define S3C2410_GPE10_SDDAT3 (0x02 << 20)
652#define S3C2443_GPE10_SD1_DAT3 (0x02 << 20)
653#define S3C2443_GPE10_AC_nRESET (0x03 << 20)
654#define S3C2400_GPE10_nXDREQ0 (0x02 << 20)
655
656#define S3C2410_GPE11 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 11)
657#define S3C2410_GPE11_INP (0x00 << 22)
658#define S3C2410_GPE11_OUTP (0x01 << 22)
659#define S3C2410_GPE11_SPIMISO0 (0x02 << 22)
660#define S3C2400_GPE11_nXDREQ1 (0x02 << 22)
661#define S3C2400_GPE11_nXBREQ (0x03 << 22)
662
663#define S3C2410_GPE12 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 12)
664#define S3C2410_GPE12_INP (0x00 << 24)
665#define S3C2410_GPE12_OUTP (0x01 << 24)
666#define S3C2410_GPE12_SPIMOSI0 (0x02 << 24)
667
668#define S3C2410_GPE13 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 13)
669#define S3C2410_GPE13_INP (0x00 << 26)
670#define S3C2410_GPE13_OUTP (0x01 << 26)
671#define S3C2410_GPE13_SPICLK0 (0x02 << 26)
672
673#define S3C2410_GPE14 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 14)
674#define S3C2410_GPE14_INP (0x00 << 28)
675#define S3C2410_GPE14_OUTP (0x01 << 28)
676#define S3C2410_GPE14_IICSCL (0x02 << 28)
677#define S3C2410_GPE14_MASK (0x03 << 28)
678
679#define S3C2410_GPE15 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 15)
680#define S3C2410_GPE15_INP (0x00 << 30)
681#define S3C2410_GPE15_OUTP (0x01 << 30)
682#define S3C2410_GPE15_IICSDA (0x02 << 30)
683#define S3C2410_GPE15_MASK (0x03 << 30)
684
685#define S3C2440_GPE0_ACSYNC (0x03 << 0)
686#define S3C2440_GPE1_ACBITCLK (0x03 << 2)
687#define S3C2440_GPE2_ACRESET (0x03 << 4)
688#define S3C2440_GPE3_ACIN (0x03 << 6)
689#define S3C2440_GPE4_ACOUT (0x03 << 8)
690
691#define S3C2410_GPE_PUPDIS(x) (1<<(x))
692
693/* S3C2410:
694 * Port F consists of 8 GPIO/Special function
695 *
696 * GPIO / interrupt inputs
697 *
698 * GPFCON has 2 bits for each of the input pins on port F
699 * 00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 undefined
700 *
701 * pull up works like all other ports.
702 *
703 * S3C2400:
704 * Port F consists of 7 GPIO/Special function
705 *
706 * GPIO/serial/misc pins
707*/
708
709#define S3C2410_GPFCON S3C2410_GPIOREG(0x50)
710#define S3C2410_GPFDAT S3C2410_GPIOREG(0x54)
711#define S3C2410_GPFUP S3C2410_GPIOREG(0x58)
712
713#define S3C2400_GPFCON S3C2410_GPIOREG(0x38)
714#define S3C2400_GPFDAT S3C2410_GPIOREG(0x3C)
715#define S3C2400_GPFUP S3C2410_GPIOREG(0x40)
716
717#define S3C2410_GPF0 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 0)
718#define S3C2410_GPF0_INP (0x00 << 0)
719#define S3C2410_GPF0_OUTP (0x01 << 0)
720#define S3C2410_GPF0_EINT0 (0x02 << 0)
721#define S3C2400_GPF0_RXD0 (0x02 << 0)
722
723#define S3C2410_GPF1 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 1)
724#define S3C2410_GPF1_INP (0x00 << 2)
725#define S3C2410_GPF1_OUTP (0x01 << 2)
726#define S3C2410_GPF1_EINT1 (0x02 << 2)
727#define S3C2400_GPF1_RXD1 (0x02 << 2)
728#define S3C2400_GPF1_IICSDA (0x03 << 2)
729
730#define S3C2410_GPF2 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 2)
731#define S3C2410_GPF2_INP (0x00 << 4)
732#define S3C2410_GPF2_OUTP (0x01 << 4)
733#define S3C2410_GPF2_EINT2 (0x02 << 4)
734#define S3C2400_GPF2_TXD0 (0x02 << 4)
735
736#define S3C2410_GPF3 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 3)
737#define S3C2410_GPF3_INP (0x00 << 6)
738#define S3C2410_GPF3_OUTP (0x01 << 6)
739#define S3C2410_GPF3_EINT3 (0x02 << 6)
740#define S3C2400_GPF3_TXD1 (0x02 << 6)
741#define S3C2400_GPF3_IICSCL (0x03 << 6)
742
743#define S3C2410_GPF4 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 4)
744#define S3C2410_GPF4_INP (0x00 << 8)
745#define S3C2410_GPF4_OUTP (0x01 << 8)
746#define S3C2410_GPF4_EINT4 (0x02 << 8)
747#define S3C2400_GPF4_nRTS0 (0x02 << 8)
748#define S3C2400_GPF4_nXBACK (0x03 << 8)
749
750#define S3C2410_GPF5 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 5)
751#define S3C2410_GPF5_INP (0x00 << 10)
752#define S3C2410_GPF5_OUTP (0x01 << 10)
753#define S3C2410_GPF5_EINT5 (0x02 << 10)
754#define S3C2400_GPF5_nCTS0 (0x02 << 10)
755#define S3C2400_GPF5_nXBREQ (0x03 << 10)
756
757#define S3C2410_GPF6 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 6)
758#define S3C2410_GPF6_INP (0x00 << 12)
759#define S3C2410_GPF6_OUTP (0x01 << 12)
760#define S3C2410_GPF6_EINT6 (0x02 << 12)
761#define S3C2400_GPF6_CLKOUT (0x02 << 12)
762
763#define S3C2410_GPF7 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 7)
764#define S3C2410_GPF7_INP (0x00 << 14)
765#define S3C2410_GPF7_OUTP (0x01 << 14)
766#define S3C2410_GPF7_EINT7 (0x02 << 14)
767
768#define S3C2410_GPF_PUPDIS(x) (1<<(x))
769
770/* S3C2410:
771 * Port G consists of 8 GPIO/IRQ/Special function
772 *
773 * GPGCON has 2 bits for each of the input pins on port F
774 * 00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 special func
775 *
776 * pull up works like all other ports.
777 *
778 * S3C2400:
779 * Port G consists of 10 GPIO/Special function
780*/
781
782#define S3C2410_GPGCON S3C2410_GPIOREG(0x60)
783#define S3C2410_GPGDAT S3C2410_GPIOREG(0x64)
784#define S3C2410_GPGUP S3C2410_GPIOREG(0x68)
785
786#define S3C2400_GPGCON S3C2410_GPIOREG(0x44)
787#define S3C2400_GPGDAT S3C2410_GPIOREG(0x48)
788#define S3C2400_GPGUP S3C2410_GPIOREG(0x4C)
789
790#define S3C2410_GPG0 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 0)
791#define S3C2410_GPG0_INP (0x00 << 0)
792#define S3C2410_GPG0_OUTP (0x01 << 0)
793#define S3C2410_GPG0_EINT8 (0x02 << 0)
794#define S3C2400_GPG0_I2SLRCK (0x02 << 0)
795
796#define S3C2410_GPG1 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 1)
797#define S3C2410_GPG1_INP (0x00 << 2)
798#define S3C2410_GPG1_OUTP (0x01 << 2)
799#define S3C2410_GPG1_EINT9 (0x02 << 2)
800#define S3C2400_GPG1_I2SSCLK (0x02 << 2)
801
802#define S3C2410_GPG2 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 2)
803#define S3C2410_GPG2_INP (0x00 << 4)
804#define S3C2410_GPG2_OUTP (0x01 << 4)
805#define S3C2410_GPG2_EINT10 (0x02 << 4)
806#define S3C2410_GPG2_nSS0 (0x03 << 4)
807#define S3C2400_GPG2_CDCLK (0x02 << 4)
808
809#define S3C2410_GPG3 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 3)
810#define S3C2410_GPG3_INP (0x00 << 6)
811#define S3C2410_GPG3_OUTP (0x01 << 6)
812#define S3C2410_GPG3_EINT11 (0x02 << 6)
813#define S3C2410_GPG3_nSS1 (0x03 << 6)
814#define S3C2400_GPG3_I2SSDO (0x02 << 6)
815#define S3C2400_GPG3_I2SSDI (0x03 << 6)
816
817#define S3C2410_GPG4 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 4)
818#define S3C2410_GPG4_INP (0x00 << 8)
819#define S3C2410_GPG4_OUTP (0x01 << 8)
820#define S3C2410_GPG4_EINT12 (0x02 << 8)
821#define S3C2400_GPG4_MMCCLK (0x02 << 8)
822#define S3C2400_GPG4_I2SSDI (0x03 << 8)
823#define S3C2410_GPG4_LCDPWREN (0x03 << 8)
824#define S3C2443_GPG4_LCDPWRDN (0x03 << 8)
825
826#define S3C2410_GPG5 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 5)
827#define S3C2410_GPG5_INP (0x00 << 10)
828#define S3C2410_GPG5_OUTP (0x01 << 10)
829#define S3C2410_GPG5_EINT13 (0x02 << 10)
830#define S3C2400_GPG5_MMCCMD (0x02 << 10)
831#define S3C2400_GPG5_IICSDA (0x03 << 10)
832#define S3C2410_GPG5_SPIMISO1 (0x03 << 10) /* not s3c2443 */
833
834#define S3C2410_GPG6 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 6)
835#define S3C2410_GPG6_INP (0x00 << 12)
836#define S3C2410_GPG6_OUTP (0x01 << 12)
837#define S3C2410_GPG6_EINT14 (0x02 << 12)
838#define S3C2400_GPG6_MMCDAT (0x02 << 12)
839#define S3C2400_GPG6_IICSCL (0x03 << 12)
840#define S3C2410_GPG6_SPIMOSI1 (0x03 << 12)
841
842#define S3C2410_GPG7 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 7)
843#define S3C2410_GPG7_INP (0x00 << 14)
844#define S3C2410_GPG7_OUTP (0x01 << 14)
845#define S3C2410_GPG7_EINT15 (0x02 << 14)
846#define S3C2410_GPG7_SPICLK1 (0x03 << 14)
847#define S3C2400_GPG7_SPIMISO (0x02 << 14)
848#define S3C2400_GPG7_IICSDA (0x03 << 14)
849
850#define S3C2410_GPG8 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 8)
851#define S3C2410_GPG8_INP (0x00 << 16)
852#define S3C2410_GPG8_OUTP (0x01 << 16)
853#define S3C2410_GPG8_EINT16 (0x02 << 16)
854#define S3C2400_GPG8_SPIMOSI (0x02 << 16)
855#define S3C2400_GPG8_IICSCL (0x03 << 16)
856
857#define S3C2410_GPG9 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 9)
858#define S3C2410_GPG9_INP (0x00 << 18)
859#define S3C2410_GPG9_OUTP (0x01 << 18)
860#define S3C2410_GPG9_EINT17 (0x02 << 18)
861#define S3C2400_GPG9_SPICLK (0x02 << 18)
862#define S3C2400_GPG9_MMCCLK (0x03 << 18)
863
864#define S3C2410_GPG10 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 10)
865#define S3C2410_GPG10_INP (0x00 << 20)
866#define S3C2410_GPG10_OUTP (0x01 << 20)
867#define S3C2410_GPG10_EINT18 (0x02 << 20)
868
869#define S3C2410_GPG11 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 11)
870#define S3C2410_GPG11_INP (0x00 << 22)
871#define S3C2410_GPG11_OUTP (0x01 << 22)
872#define S3C2410_GPG11_EINT19 (0x02 << 22)
873#define S3C2410_GPG11_TCLK1 (0x03 << 22)
874#define S3C2443_GPG11_CF_nIREQ (0x03 << 22)
875
876#define S3C2410_GPG12 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 12)
877#define S3C2410_GPG12_INP (0x00 << 24)
878#define S3C2410_GPG12_OUTP (0x01 << 24)
879#define S3C2410_GPG12_EINT20 (0x02 << 24)
880#define S3C2410_GPG12_XMON (0x03 << 24)
881#define S3C2442_GPG12_nSPICS0 (0x03 << 24)
882#define S3C2443_GPG12_nINPACK (0x03 << 24)
883
884#define S3C2410_GPG13 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 13)
885#define S3C2410_GPG13_INP (0x00 << 26)
886#define S3C2410_GPG13_OUTP (0x01 << 26)
887#define S3C2410_GPG13_EINT21 (0x02 << 26)
888#define S3C2410_GPG13_nXPON (0x03 << 26)
889#define S3C2443_GPG13_CF_nREG (0x03 << 26)
890
891#define S3C2410_GPG14 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 14)
892#define S3C2410_GPG14_INP (0x00 << 28)
893#define S3C2410_GPG14_OUTP (0x01 << 28)
894#define S3C2410_GPG14_EINT22 (0x02 << 28)
895#define S3C2410_GPG14_YMON (0x03 << 28)
896#define S3C2443_GPG14_CF_RESET (0x03 << 28)
897
898#define S3C2410_GPG15 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 15)
899#define S3C2410_GPG15_INP (0x00 << 30)
900#define S3C2410_GPG15_OUTP (0x01 << 30)
901#define S3C2410_GPG15_EINT23 (0x02 << 30)
902#define S3C2410_GPG15_nYPON (0x03 << 30)
903#define S3C2443_GPG15_CF_PWR (0x03 << 30)
904
905#define S3C2410_GPG_PUPDIS(x) (1<<(x))
906
907/* Port H consists of11 GPIO/serial/Misc pins
908 *
909 * GPGCON has 2 bits for each of the input pins on port F
910 * 00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 special func
911 *
912 * pull up works like all other ports.
913*/
914
915#define S3C2410_GPHCON S3C2410_GPIOREG(0x70)
916#define S3C2410_GPHDAT S3C2410_GPIOREG(0x74)
917#define S3C2410_GPHUP S3C2410_GPIOREG(0x78)
918
919#define S3C2410_GPH0 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 0)
920#define S3C2410_GPH0_INP (0x00 << 0)
921#define S3C2410_GPH0_OUTP (0x01 << 0)
922#define S3C2410_GPH0_nCTS0 (0x02 << 0)
923
924#define S3C2410_GPH1 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 1)
925#define S3C2410_GPH1_INP (0x00 << 2)
926#define S3C2410_GPH1_OUTP (0x01 << 2)
927#define S3C2410_GPH1_nRTS0 (0x02 << 2)
928
929#define S3C2410_GPH2 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 2)
930#define S3C2410_GPH2_INP (0x00 << 4)
931#define S3C2410_GPH2_OUTP (0x01 << 4)
932#define S3C2410_GPH2_TXD0 (0x02 << 4)
933
934#define S3C2410_GPH3 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 3)
935#define S3C2410_GPH3_INP (0x00 << 6)
936#define S3C2410_GPH3_OUTP (0x01 << 6)
937#define S3C2410_GPH3_RXD0 (0x02 << 6)
938
939#define S3C2410_GPH4 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 4)
940#define S3C2410_GPH4_INP (0x00 << 8)
941#define S3C2410_GPH4_OUTP (0x01 << 8)
942#define S3C2410_GPH4_TXD1 (0x02 << 8)
943
944#define S3C2410_GPH5 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 5)
945#define S3C2410_GPH5_INP (0x00 << 10)
946#define S3C2410_GPH5_OUTP (0x01 << 10)
947#define S3C2410_GPH5_RXD1 (0x02 << 10)
948
949#define S3C2410_GPH6 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 6)
950#define S3C2410_GPH6_INP (0x00 << 12)
951#define S3C2410_GPH6_OUTP (0x01 << 12)
952#define S3C2410_GPH6_TXD2 (0x02 << 12)
953#define S3C2410_GPH6_nRTS1 (0x03 << 12)
954
955#define S3C2410_GPH7 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 7)
956#define S3C2410_GPH7_INP (0x00 << 14)
957#define S3C2410_GPH7_OUTP (0x01 << 14)
958#define S3C2410_GPH7_RXD2 (0x02 << 14)
959#define S3C2410_GPH7_nCTS1 (0x03 << 14)
960
961#define S3C2410_GPH8 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 8)
962#define S3C2410_GPH8_INP (0x00 << 16)
963#define S3C2410_GPH8_OUTP (0x01 << 16)
964#define S3C2410_GPH8_UCLK (0x02 << 16)
965
966#define S3C2410_GPH9 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 9)
967#define S3C2410_GPH9_INP (0x00 << 18)
968#define S3C2410_GPH9_OUTP (0x01 << 18)
969#define S3C2410_GPH9_CLKOUT0 (0x02 << 18)
970#define S3C2442_GPH9_nSPICS0 (0x03 << 18)
971
972#define S3C2410_GPH10 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 10)
973#define S3C2410_GPH10_INP (0x00 << 20)
974#define S3C2410_GPH10_OUTP (0x01 << 20)
975#define S3C2410_GPH10_CLKOUT1 (0x02 << 20)
976
977/* The S3C2412 and S3C2413 move the GPJ register set to after
978 * GPH, which means all registers after 0x80 are now offset by 0x10
979 * for the 2412/2413 from the 2410/2440/2442
980*/
981
982/* miscellaneous control */
983#define S3C2400_MISCCR S3C2410_GPIOREG(0x54)
984#define S3C2410_MISCCR S3C2410_GPIOREG(0x80)
985#define S3C2410_DCLKCON S3C2410_GPIOREG(0x84)
986
987#define S3C24XX_DCLKCON S3C24XX_GPIOREG2(0x84)
988
989/* see clock.h for dclk definitions */
990
991/* pullup control on databus */
992#define S3C2410_MISCCR_SPUCR_HEN (0<<0)
993#define S3C2410_MISCCR_SPUCR_HDIS (1<<0)
994#define S3C2410_MISCCR_SPUCR_LEN (0<<1)
995#define S3C2410_MISCCR_SPUCR_LDIS (1<<1)
996
997#define S3C2400_MISCCR_SPUCR_LEN (0<<0)
998#define S3C2400_MISCCR_SPUCR_LDIS (1<<0)
999#define S3C2400_MISCCR_SPUCR_HEN (0<<1)
1000#define S3C2400_MISCCR_SPUCR_HDIS (1<<1)
1001
1002#define S3C2400_MISCCR_HZ_STOPEN (0<<2)
1003#define S3C2400_MISCCR_HZ_STOPPREV (1<<2)
1004
1005#define S3C2410_MISCCR_USBDEV (0<<3)
1006#define S3C2410_MISCCR_USBHOST (1<<3)
1007
1008#define S3C2410_MISCCR_CLK0_MPLL (0<<4)
1009#define S3C2410_MISCCR_CLK0_UPLL (1<<4)
1010#define S3C2410_MISCCR_CLK0_FCLK (2<<4)
1011#define S3C2410_MISCCR_CLK0_HCLK (3<<4)
1012#define S3C2410_MISCCR_CLK0_PCLK (4<<4)
1013#define S3C2410_MISCCR_CLK0_DCLK0 (5<<4)
1014#define S3C2410_MISCCR_CLK0_MASK (7<<4)
1015
1016#define S3C2412_MISCCR_CLK0_RTC (2<<4)
1017
1018#define S3C2410_MISCCR_CLK1_MPLL (0<<8)
1019#define S3C2410_MISCCR_CLK1_UPLL (1<<8)
1020#define S3C2410_MISCCR_CLK1_FCLK (2<<8)
1021#define S3C2410_MISCCR_CLK1_HCLK (3<<8)
1022#define S3C2410_MISCCR_CLK1_PCLK (4<<8)
1023#define S3C2410_MISCCR_CLK1_DCLK1 (5<<8)
1024#define S3C2410_MISCCR_CLK1_MASK (7<<8)
1025
1026#define S3C2412_MISCCR_CLK1_CLKsrc (0<<8)
1027
1028#define S3C2410_MISCCR_USBSUSPND0 (1<<12)
1029#define S3C2410_MISCCR_USBSUSPND1 (1<<13)
1030
1031#define S3C2410_MISCCR_nRSTCON (1<<16)
1032
1033#define S3C2410_MISCCR_nEN_SCLK0 (1<<17)
1034#define S3C2410_MISCCR_nEN_SCLK1 (1<<18)
1035#define S3C2410_MISCCR_nEN_SCLKE (1<<19) /* not 2412 */
1036#define S3C2410_MISCCR_SDSLEEP (7<<17)
1037
1038/* external interrupt control... */
1039/* S3C2410_EXTINT0 -> irq sense control for EINT0..EINT7
1040 * S3C2410_EXTINT1 -> irq sense control for EINT8..EINT15
1041 * S3C2410_EXTINT2 -> irq sense control for EINT16..EINT23
1042 *
1043 * note S3C2410_EXTINT2 has filtering options for EINT16..EINT23
1044 *
1045 * Samsung datasheet p9-25
1046*/
1047#define S3C2400_EXTINT0 S3C2410_GPIOREG(0x58)
1048#define S3C2410_EXTINT0 S3C2410_GPIOREG(0x88)
1049#define S3C2410_EXTINT1 S3C2410_GPIOREG(0x8C)
1050#define S3C2410_EXTINT2 S3C2410_GPIOREG(0x90)
1051
1052#define S3C24XX_EXTINT0 S3C24XX_GPIOREG2(0x88)
1053#define S3C24XX_EXTINT1 S3C24XX_GPIOREG2(0x8C)
1054#define S3C24XX_EXTINT2 S3C24XX_GPIOREG2(0x90)
1055
1056/* values for S3C2410_EXTINT0/1/2 */
1057#define S3C2410_EXTINT_LOWLEV (0x00)
1058#define S3C2410_EXTINT_HILEV (0x01)
1059#define S3C2410_EXTINT_FALLEDGE (0x02)
1060#define S3C2410_EXTINT_RISEEDGE (0x04)
1061#define S3C2410_EXTINT_BOTHEDGE (0x06)
1062
1063/* interrupt filtering conrrol for EINT16..EINT23 */
1064#define S3C2410_EINFLT0 S3C2410_GPIOREG(0x94)
1065#define S3C2410_EINFLT1 S3C2410_GPIOREG(0x98)
1066#define S3C2410_EINFLT2 S3C2410_GPIOREG(0x9C)
1067#define S3C2410_EINFLT3 S3C2410_GPIOREG(0xA0)
1068
1069#define S3C24XX_EINFLT0 S3C24XX_GPIOREG2(0x94)
1070#define S3C24XX_EINFLT1 S3C24XX_GPIOREG2(0x98)
1071#define S3C24XX_EINFLT2 S3C24XX_GPIOREG2(0x9C)
1072#define S3C24XX_EINFLT3 S3C24XX_GPIOREG2(0xA0)
1073
1074/* values for interrupt filtering */
1075#define S3C2410_EINTFLT_PCLK (0x00)
1076#define S3C2410_EINTFLT_EXTCLK (1<<7)
1077#define S3C2410_EINTFLT_WIDTHMSK(x) ((x) & 0x3f)
1078
1079/* removed EINTxxxx defs from here, not meant for this */
1080
1081/* GSTATUS have miscellaneous information in them
1082 *
1083 * These move between s3c2410 and s3c2412 style systems.
1084 */
1085
1086#define S3C2410_GSTATUS0 S3C2410_GPIOREG(0x0AC)
1087#define S3C2410_GSTATUS1 S3C2410_GPIOREG(0x0B0)
1088#define S3C2410_GSTATUS2 S3C2410_GPIOREG(0x0B4)
1089#define S3C2410_GSTATUS3 S3C2410_GPIOREG(0x0B8)
1090#define S3C2410_GSTATUS4 S3C2410_GPIOREG(0x0BC)
1091
1092#define S3C2412_GSTATUS0 S3C2410_GPIOREG(0x0BC)
1093#define S3C2412_GSTATUS1 S3C2410_GPIOREG(0x0C0)
1094#define S3C2412_GSTATUS2 S3C2410_GPIOREG(0x0C4)
1095#define S3C2412_GSTATUS3 S3C2410_GPIOREG(0x0C8)
1096#define S3C2412_GSTATUS4 S3C2410_GPIOREG(0x0CC)
1097
1098#define S3C24XX_GSTATUS0 S3C24XX_GPIOREG2(0x0AC)
1099#define S3C24XX_GSTATUS1 S3C24XX_GPIOREG2(0x0B0)
1100#define S3C24XX_GSTATUS2 S3C24XX_GPIOREG2(0x0B4)
1101#define S3C24XX_GSTATUS3 S3C24XX_GPIOREG2(0x0B8)
1102#define S3C24XX_GSTATUS4 S3C24XX_GPIOREG2(0x0BC)
1103
1104#define S3C2410_GSTATUS0_nWAIT (1<<3)
1105#define S3C2410_GSTATUS0_NCON (1<<2)
1106#define S3C2410_GSTATUS0_RnB (1<<1)
1107#define S3C2410_GSTATUS0_nBATTFLT (1<<0)
1108
1109#define S3C2410_GSTATUS1_IDMASK (0xffff0000)
1110#define S3C2410_GSTATUS1_2410 (0x32410000)
1111#define S3C2410_GSTATUS1_2412 (0x32412001)
1112#define S3C2410_GSTATUS1_2440 (0x32440000)
1113#define S3C2410_GSTATUS1_2442 (0x32440aaa)
1114
1115#define S3C2410_GSTATUS2_WTRESET (1<<2)
1116#define S3C2410_GSTATUS2_OFFRESET (1<<1)
1117#define S3C2410_GSTATUS2_PONRESET (1<<0)
1118
1119/* open drain control register */
1120#define S3C2400_OPENCR S3C2410_GPIOREG(0x50)
1121
1122#define S3C2400_OPENCR_OPC_RXD1DIS (0<<0)
1123#define S3C2400_OPENCR_OPC_RXD1EN (1<<0)
1124#define S3C2400_OPENCR_OPC_TXD1DIS (0<<1)
1125#define S3C2400_OPENCR_OPC_TXD1EN (1<<1)
1126#define S3C2400_OPENCR_OPC_CMDDIS (0<<2)
1127#define S3C2400_OPENCR_OPC_CMDEN (1<<2)
1128#define S3C2400_OPENCR_OPC_DATDIS (0<<3)
1129#define S3C2400_OPENCR_OPC_DATEN (1<<3)
1130#define S3C2400_OPENCR_OPC_MISODIS (0<<4)
1131#define S3C2400_OPENCR_OPC_MISOEN (1<<4)
1132#define S3C2400_OPENCR_OPC_MOSIDIS (0<<5)
1133#define S3C2400_OPENCR_OPC_MOSIEN (1<<5)
1134
1135/* 2412/2413 sleep configuration registers */
1136
1137#define S3C2412_GPBSLPCON S3C2410_GPIOREG(0x1C)
1138#define S3C2412_GPCSLPCON S3C2410_GPIOREG(0x2C)
1139#define S3C2412_GPDSLPCON S3C2410_GPIOREG(0x3C)
1140#define S3C2412_GPFSLPCON S3C2410_GPIOREG(0x5C)
1141#define S3C2412_GPGSLPCON S3C2410_GPIOREG(0x6C)
1142#define S3C2412_GPHSLPCON S3C2410_GPIOREG(0x7C)
1143
1144/* definitions for each pin bit */
1145#define S3C2412_GPIO_SLPCON_LOW ( 0x00 )
1146#define S3C2412_GPIO_SLPCON_HIGH ( 0x01 )
1147#define S3C2412_GPIO_SLPCON_IN ( 0x02 )
1148#define S3C2412_GPIO_SLPCON_PULL ( 0x03 )
1149
1150#define S3C2412_SLPCON_LOW(x) ( 0x00 << ((x) * 2))
1151#define S3C2412_SLPCON_HIGH(x) ( 0x01 << ((x) * 2))
1152#define S3C2412_SLPCON_IN(x) ( 0x02 << ((x) * 2))
1153#define S3C2412_SLPCON_PULL(x) ( 0x03 << ((x) * 2))
1154#define S3C2412_SLPCON_EINT(x) ( 0x02 << ((x) * 2)) /* only IRQ pins */
1155#define S3C2412_SLPCON_MASK(x) ( 0x03 << ((x) * 2))
1156
1157#define S3C2412_SLPCON_ALL_LOW (0x0)
1158#define S3C2412_SLPCON_ALL_HIGH (0x11111111 | 0x44444444)
1159#define S3C2412_SLPCON_ALL_IN (0x22222222 | 0x88888888)
1160#define S3C2412_SLPCON_ALL_PULL (0x33333333)
1161
1162#endif /* __ASM_ARCH_REGS_GPIO_H */
1163
diff --git a/include/asm-arm/arch-s3c2410/regs-gpioj.h b/include/asm-arm/arch-s3c2410/regs-gpioj.h
deleted file mode 100644
index 0362332faaf0..000000000000
--- a/include/asm-arm/arch-s3c2410/regs-gpioj.h
+++ /dev/null
@@ -1,106 +0,0 @@
1/* linux/include/asm-arm/arch-s3c2410/regs-gpioj.h
2 *
3 * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
4 * http://www.simtec.co.uk/products/SWLINUX/
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
9 *
10 * S3C2440 GPIO J register definitions
11*/
12
13
14#ifndef __ASM_ARCH_REGS_GPIOJ_H
15#define __ASM_ARCH_REGS_GPIOJ_H "gpioj"
16
17/* Port J consists of 13 GPIO/Camera pins
18 *
19 * GPJCON has 2 bits for each of the input pins on port F
20 * 00 = 0 input, 1 output, 2 Camera
21 *
22 * pull up works like all other ports.
23*/
24
25#define S3C2440_GPIO_BANKJ (416)
26
27#define S3C2440_GPJCON S3C2410_GPIOREG(0xd0)
28#define S3C2440_GPJDAT S3C2410_GPIOREG(0xd4)
29#define S3C2440_GPJUP S3C2410_GPIOREG(0xd8)
30
31#define S3C2413_GPJCON S3C2410_GPIOREG(0x80)
32#define S3C2413_GPJDAT S3C2410_GPIOREG(0x84)
33#define S3C2413_GPJUP S3C2410_GPIOREG(0x88)
34#define S3C2413_GPJSLPCON S3C2410_GPIOREG(0x8C)
35
36#define S3C2440_GPJ0 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 0)
37#define S3C2440_GPJ0_INP (0x00 << 0)
38#define S3C2440_GPJ0_OUTP (0x01 << 0)
39#define S3C2440_GPJ0_CAMDATA0 (0x02 << 0)
40
41#define S3C2440_GPJ1 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 1)
42#define S3C2440_GPJ1_INP (0x00 << 2)
43#define S3C2440_GPJ1_OUTP (0x01 << 2)
44#define S3C2440_GPJ1_CAMDATA1 (0x02 << 2)
45
46#define S3C2440_GPJ2 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 2)
47#define S3C2440_GPJ2_INP (0x00 << 4)
48#define S3C2440_GPJ2_OUTP (0x01 << 4)
49#define S3C2440_GPJ2_CAMDATA2 (0x02 << 4)
50
51#define S3C2440_GPJ3 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 3)
52#define S3C2440_GPJ3_INP (0x00 << 6)
53#define S3C2440_GPJ3_OUTP (0x01 << 6)
54#define S3C2440_GPJ3_CAMDATA3 (0x02 << 6)
55
56#define S3C2440_GPJ4 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 4)
57#define S3C2440_GPJ4_INP (0x00 << 8)
58#define S3C2440_GPJ4_OUTP (0x01 << 8)
59#define S3C2440_GPJ4_CAMDATA4 (0x02 << 8)
60
61#define S3C2440_GPJ5 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 5)
62#define S3C2440_GPJ5_INP (0x00 << 10)
63#define S3C2440_GPJ5_OUTP (0x01 << 10)
64#define S3C2440_GPJ5_CAMDATA5 (0x02 << 10)
65
66#define S3C2440_GPJ6 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 6)
67#define S3C2440_GPJ6_INP (0x00 << 12)
68#define S3C2440_GPJ6_OUTP (0x01 << 12)
69#define S3C2440_GPJ6_CAMDATA6 (0x02 << 12)
70
71#define S3C2440_GPJ7 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 7)
72#define S3C2440_GPJ7_INP (0x00 << 14)
73#define S3C2440_GPJ7_OUTP (0x01 << 14)
74#define S3C2440_GPJ7_CAMDATA7 (0x02 << 14)
75
76#define S3C2440_GPJ8 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 8)
77#define S3C2440_GPJ8_INP (0x00 << 16)
78#define S3C2440_GPJ8_OUTP (0x01 << 16)
79#define S3C2440_GPJ8_CAMPCLK (0x02 << 16)
80
81#define S3C2440_GPJ9 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 9)
82#define S3C2440_GPJ9_INP (0x00 << 18)
83#define S3C2440_GPJ9_OUTP (0x01 << 18)
84#define S3C2440_GPJ9_CAMVSYNC (0x02 << 18)
85
86#define S3C2440_GPJ10 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 10)
87#define S3C2440_GPJ10_INP (0x00 << 20)
88#define S3C2440_GPJ10_OUTP (0x01 << 20)
89#define S3C2440_GPJ10_CAMHREF (0x02 << 20)
90
91#define S3C2440_GPJ11 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 11)
92#define S3C2440_GPJ11_INP (0x00 << 22)
93#define S3C2440_GPJ11_OUTP (0x01 << 22)
94#define S3C2440_GPJ11_CAMCLKOUT (0x02 << 22)
95
96#define S3C2440_GPJ12 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 12)
97#define S3C2440_GPJ12_INP (0x00 << 24)
98#define S3C2440_GPJ12_OUTP (0x01 << 24)
99#define S3C2440_GPJ12_CAMRESET (0x02 << 24)
100
101#define S3C2443_GPJ13 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 13)
102#define S3C2443_GPJ14 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 14)
103#define S3C2443_GPJ15 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 15)
104
105#endif /* __ASM_ARCH_REGS_GPIOJ_H */
106
diff --git a/include/asm-arm/arch-s3c2410/regs-irq.h b/include/asm-arm/arch-s3c2410/regs-irq.h
deleted file mode 100644
index 498184cb8adc..000000000000
--- a/include/asm-arm/arch-s3c2410/regs-irq.h
+++ /dev/null
@@ -1,43 +0,0 @@
1/* linux/include/asm-arm/arch-s3c2410/regs-irq.h
2 *
3 * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
4 * http://www.simtec.co.uk/products/SWLINUX/
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
9*/
10
11
12#ifndef ___ASM_ARCH_REGS_IRQ_H
13#define ___ASM_ARCH_REGS_IRQ_H "$Id: irq.h,v 1.3 2003/03/25 21:29:06 ben Exp $"
14
15/* interrupt controller */
16
17#define S3C2410_IRQREG(x) ((x) + S3C24XX_VA_IRQ)
18#define S3C2410_EINTREG(x) ((x) + S3C24XX_VA_GPIO)
19#define S3C24XX_EINTREG(x) ((x) + S3C24XX_VA_GPIO2)
20
21#define S3C2410_SRCPND S3C2410_IRQREG(0x000)
22#define S3C2410_INTMOD S3C2410_IRQREG(0x004)
23#define S3C2410_INTMSK S3C2410_IRQREG(0x008)
24#define S3C2410_PRIORITY S3C2410_IRQREG(0x00C)
25#define S3C2410_INTPND S3C2410_IRQREG(0x010)
26#define S3C2410_INTOFFSET S3C2410_IRQREG(0x014)
27#define S3C2410_SUBSRCPND S3C2410_IRQREG(0x018)
28#define S3C2410_INTSUBMSK S3C2410_IRQREG(0x01C)
29
30/* mask: 0=enable, 1=disable
31 * 1 bit EINT, 4=EINT4, 23=EINT23
32 * EINT0,1,2,3 are not handled here.
33*/
34
35#define S3C2410_EINTMASK S3C2410_EINTREG(0x0A4)
36#define S3C2410_EINTPEND S3C2410_EINTREG(0X0A8)
37#define S3C2412_EINTMASK S3C2410_EINTREG(0x0B4)
38#define S3C2412_EINTPEND S3C2410_EINTREG(0X0B8)
39
40#define S3C24XX_EINTMASK S3C24XX_EINTREG(0x0A4)
41#define S3C24XX_EINTPEND S3C24XX_EINTREG(0X0A8)
42
43#endif /* ___ASM_ARCH_REGS_IRQ_H */
diff --git a/include/asm-arm/arch-s3c2410/regs-lcd.h b/include/asm-arm/arch-s3c2410/regs-lcd.h
deleted file mode 100644
index bd854845697f..000000000000
--- a/include/asm-arm/arch-s3c2410/regs-lcd.h
+++ /dev/null
@@ -1,162 +0,0 @@
1/* linux/include/asm-arm/arch-s3c2410/regs-lcd.h
2 *
3 * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
4 * http://www.simtec.co.uk/products/SWLINUX/
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
9*/
10
11
12#ifndef ___ASM_ARCH_REGS_LCD_H
13#define ___ASM_ARCH_REGS_LCD_H "$Id: lcd.h,v 1.3 2003/06/26 13:25:06 ben Exp $"
14
15#define S3C2410_LCDREG(x) (x)
16
17/* LCD control registers */
18#define S3C2410_LCDCON1 S3C2410_LCDREG(0x00)
19#define S3C2410_LCDCON2 S3C2410_LCDREG(0x04)
20#define S3C2410_LCDCON3 S3C2410_LCDREG(0x08)
21#define S3C2410_LCDCON4 S3C2410_LCDREG(0x0C)
22#define S3C2410_LCDCON5 S3C2410_LCDREG(0x10)
23
24#define S3C2410_LCDCON1_CLKVAL(x) ((x) << 8)
25#define S3C2410_LCDCON1_MMODE (1<<7)
26#define S3C2410_LCDCON1_DSCAN4 (0<<5)
27#define S3C2410_LCDCON1_STN4 (1<<5)
28#define S3C2410_LCDCON1_STN8 (2<<5)
29#define S3C2410_LCDCON1_TFT (3<<5)
30
31#define S3C2410_LCDCON1_STN1BPP (0<<1)
32#define S3C2410_LCDCON1_STN2GREY (1<<1)
33#define S3C2410_LCDCON1_STN4GREY (2<<1)
34#define S3C2410_LCDCON1_STN8BPP (3<<1)
35#define S3C2410_LCDCON1_STN12BPP (4<<1)
36
37#define S3C2410_LCDCON1_TFT1BPP (8<<1)
38#define S3C2410_LCDCON1_TFT2BPP (9<<1)
39#define S3C2410_LCDCON1_TFT4BPP (10<<1)
40#define S3C2410_LCDCON1_TFT8BPP (11<<1)
41#define S3C2410_LCDCON1_TFT16BPP (12<<1)
42#define S3C2410_LCDCON1_TFT24BPP (13<<1)
43
44#define S3C2410_LCDCON1_ENVID (1)
45
46#define S3C2410_LCDCON1_MODEMASK 0x1E
47
48#define S3C2410_LCDCON2_VBPD(x) ((x) << 24)
49#define S3C2410_LCDCON2_LINEVAL(x) ((x) << 14)
50#define S3C2410_LCDCON2_VFPD(x) ((x) << 6)
51#define S3C2410_LCDCON2_VSPW(x) ((x) << 0)
52
53#define S3C2410_LCDCON2_GET_VBPD(x) ( ((x) >> 24) & 0xFF)
54#define S3C2410_LCDCON2_GET_VFPD(x) ( ((x) >> 6) & 0xFF)
55#define S3C2410_LCDCON2_GET_VSPW(x) ( ((x) >> 0) & 0x3F)
56
57#define S3C2410_LCDCON3_HBPD(x) ((x) << 19)
58#define S3C2410_LCDCON3_WDLY(x) ((x) << 19)
59#define S3C2410_LCDCON3_HOZVAL(x) ((x) << 8)
60#define S3C2410_LCDCON3_HFPD(x) ((x) << 0)
61#define S3C2410_LCDCON3_LINEBLANK(x)((x) << 0)
62
63#define S3C2410_LCDCON3_GET_HBPD(x) ( ((x) >> 19) & 0x7F)
64#define S3C2410_LCDCON3_GET_HFPD(x) ( ((x) >> 0) & 0xFF)
65
66/* LDCCON4 changes for STN mode on the S3C2412 */
67
68#define S3C2410_LCDCON4_MVAL(x) ((x) << 8)
69#define S3C2410_LCDCON4_HSPW(x) ((x) << 0)
70#define S3C2410_LCDCON4_WLH(x) ((x) << 0)
71
72#define S3C2410_LCDCON4_GET_HSPW(x) ( ((x) >> 0) & 0xFF)
73
74#define S3C2410_LCDCON5_BPP24BL (1<<12)
75#define S3C2410_LCDCON5_FRM565 (1<<11)
76#define S3C2410_LCDCON5_INVVCLK (1<<10)
77#define S3C2410_LCDCON5_INVVLINE (1<<9)
78#define S3C2410_LCDCON5_INVVFRAME (1<<8)
79#define S3C2410_LCDCON5_INVVD (1<<7)
80#define S3C2410_LCDCON5_INVVDEN (1<<6)
81#define S3C2410_LCDCON5_INVPWREN (1<<5)
82#define S3C2410_LCDCON5_INVLEND (1<<4)
83#define S3C2410_LCDCON5_PWREN (1<<3)
84#define S3C2410_LCDCON5_ENLEND (1<<2)
85#define S3C2410_LCDCON5_BSWP (1<<1)
86#define S3C2410_LCDCON5_HWSWP (1<<0)
87
88/* framebuffer start addressed */
89#define S3C2410_LCDSADDR1 S3C2410_LCDREG(0x14)
90#define S3C2410_LCDSADDR2 S3C2410_LCDREG(0x18)
91#define S3C2410_LCDSADDR3 S3C2410_LCDREG(0x1C)
92
93#define S3C2410_LCDBANK(x) ((x) << 21)
94#define S3C2410_LCDBASEU(x) (x)
95
96#define S3C2410_OFFSIZE(x) ((x) << 11)
97#define S3C2410_PAGEWIDTH(x) (x)
98
99/* colour lookup and miscellaneous controls */
100
101#define S3C2410_REDLUT S3C2410_LCDREG(0x20)
102#define S3C2410_GREENLUT S3C2410_LCDREG(0x24)
103#define S3C2410_BLUELUT S3C2410_LCDREG(0x28)
104
105#define S3C2410_DITHMODE S3C2410_LCDREG(0x4C)
106#define S3C2410_TPAL S3C2410_LCDREG(0x50)
107
108#define S3C2410_TPAL_EN (1<<24)
109
110/* interrupt info */
111#define S3C2410_LCDINTPND S3C2410_LCDREG(0x54)
112#define S3C2410_LCDSRCPND S3C2410_LCDREG(0x58)
113#define S3C2410_LCDINTMSK S3C2410_LCDREG(0x5C)
114#define S3C2410_LCDINT_FIWSEL (1<<2)
115#define S3C2410_LCDINT_FRSYNC (1<<1)
116#define S3C2410_LCDINT_FICNT (1<<0)
117
118/* s3c2442 extra stn registers */
119
120#define S3C2442_REDLUT S3C2410_LCDREG(0x20)
121#define S3C2442_GREENLUT S3C2410_LCDREG(0x24)
122#define S3C2442_BLUELUT S3C2410_LCDREG(0x28)
123#define S3C2442_DITHMODE S3C2410_LCDREG(0x20)
124
125#define S3C2410_LPCSEL S3C2410_LCDREG(0x60)
126
127#define S3C2410_TFTPAL(x) S3C2410_LCDREG((0x400 + (x)*4))
128
129/* S3C2412 registers */
130
131#define S3C2412_TPAL S3C2410_LCDREG(0x20)
132
133#define S3C2412_LCDINTPND S3C2410_LCDREG(0x24)
134#define S3C2412_LCDSRCPND S3C2410_LCDREG(0x28)
135#define S3C2412_LCDINTMSK S3C2410_LCDREG(0x2C)
136
137#define S3C2412_TCONSEL S3C2410_LCDREG(0x30)
138
139#define S3C2412_LCDCON6 S3C2410_LCDREG(0x34)
140#define S3C2412_LCDCON7 S3C2410_LCDREG(0x38)
141#define S3C2412_LCDCON8 S3C2410_LCDREG(0x3C)
142#define S3C2412_LCDCON9 S3C2410_LCDREG(0x40)
143
144#define S3C2412_REDLUT(x) S3C2410_LCDREG(0x44 + ((x)*4))
145#define S3C2412_GREENLUT(x) S3C2410_LCDREG(0x60 + ((x)*4))
146#define S3C2412_BLUELUT(x) S3C2410_LCDREG(0x98 + ((x)*4))
147
148#define S3C2412_FRCPAT(x) S3C2410_LCDREG(0xB4 + ((x)*4))
149
150/* general registers */
151
152/* base of the LCD registers, where INTPND, INTSRC and then INTMSK
153 * are available. */
154
155#define S3C2410_LCDINTBASE S3C2410_LCDREG(0x54)
156#define S3C2412_LCDINTBASE S3C2410_LCDREG(0x24)
157
158#define S3C24XX_LCDINTPND (0x00)
159#define S3C24XX_LCDSRCPND (0x04)
160#define S3C24XX_LCDINTMSK (0x08)
161
162#endif /* ___ASM_ARCH_REGS_LCD_H */
diff --git a/include/asm-arm/arch-s3c2410/regs-mem.h b/include/asm-arm/arch-s3c2410/regs-mem.h
deleted file mode 100644
index 312ff93b63c6..000000000000
--- a/include/asm-arm/arch-s3c2410/regs-mem.h
+++ /dev/null
@@ -1,220 +0,0 @@
1/* linux/include/asm-arm/arch-s3c2410/regs-mem.h
2 *
3 * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
4 * http://www.simtec.co.uk/products/SWLINUX/
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
9 *
10 * S3C2410 Memory Control register definitions
11*/
12
13#ifndef __ASM_ARM_MEMREGS_H
14#define __ASM_ARM_MEMREGS_H "$Id: regs.h,v 1.8 2003/05/01 15:55:41 ben Exp $"
15
16#ifndef S3C2410_MEMREG
17#define S3C2410_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x))
18#endif
19
20/* bus width, and wait state control */
21#define S3C2410_BWSCON S3C2410_MEMREG(0x0000)
22
23/* bank zero config - note, pinstrapped from OM pins! */
24#define S3C2410_BWSCON_DW0_16 (1<<1)
25#define S3C2410_BWSCON_DW0_32 (2<<1)
26
27/* bank one configs */
28#define S3C2410_BWSCON_DW1_8 (0<<4)
29#define S3C2410_BWSCON_DW1_16 (1<<4)
30#define S3C2410_BWSCON_DW1_32 (2<<4)
31#define S3C2410_BWSCON_WS1 (1<<6)
32#define S3C2410_BWSCON_ST1 (1<<7)
33
34/* bank 2 configurations */
35#define S3C2410_BWSCON_DW2_8 (0<<8)
36#define S3C2410_BWSCON_DW2_16 (1<<8)
37#define S3C2410_BWSCON_DW2_32 (2<<8)
38#define S3C2410_BWSCON_WS2 (1<<10)
39#define S3C2410_BWSCON_ST2 (1<<11)
40
41/* bank 3 configurations */
42#define S3C2410_BWSCON_DW3_8 (0<<12)
43#define S3C2410_BWSCON_DW3_16 (1<<12)
44#define S3C2410_BWSCON_DW3_32 (2<<12)
45#define S3C2410_BWSCON_WS3 (1<<14)
46#define S3C2410_BWSCON_ST3 (1<<15)
47
48/* bank 4 configurations */
49#define S3C2410_BWSCON_DW4_8 (0<<16)
50#define S3C2410_BWSCON_DW4_16 (1<<16)
51#define S3C2410_BWSCON_DW4_32 (2<<16)
52#define S3C2410_BWSCON_WS4 (1<<18)
53#define S3C2410_BWSCON_ST4 (1<<19)
54
55/* bank 5 configurations */
56#define S3C2410_BWSCON_DW5_8 (0<<20)
57#define S3C2410_BWSCON_DW5_16 (1<<20)
58#define S3C2410_BWSCON_DW5_32 (2<<20)
59#define S3C2410_BWSCON_WS5 (1<<22)
60#define S3C2410_BWSCON_ST5 (1<<23)
61
62/* bank 6 configurations */
63#define S3C2410_BWSCON_DW6_8 (0<<24)
64#define S3C2410_BWSCON_DW6_16 (1<<24)
65#define S3C2410_BWSCON_DW6_32 (2<<24)
66#define S3C2410_BWSCON_WS6 (1<<26)
67#define S3C2410_BWSCON_ST6 (1<<27)
68
69/* bank 7 configurations */
70#define S3C2410_BWSCON_DW7_8 (0<<28)
71#define S3C2410_BWSCON_DW7_16 (1<<28)
72#define S3C2410_BWSCON_DW7_32 (2<<28)
73#define S3C2410_BWSCON_WS7 (1<<30)
74#define S3C2410_BWSCON_ST7 (1<<31)
75
76/* memory set (rom, ram) */
77#define S3C2410_BANKCON0 S3C2410_MEMREG(0x0004)
78#define S3C2410_BANKCON1 S3C2410_MEMREG(0x0008)
79#define S3C2410_BANKCON2 S3C2410_MEMREG(0x000C)
80#define S3C2410_BANKCON3 S3C2410_MEMREG(0x0010)
81#define S3C2410_BANKCON4 S3C2410_MEMREG(0x0014)
82#define S3C2410_BANKCON5 S3C2410_MEMREG(0x0018)
83#define S3C2410_BANKCON6 S3C2410_MEMREG(0x001C)
84#define S3C2410_BANKCON7 S3C2410_MEMREG(0x0020)
85
86/* bank configuration registers */
87
88#define S3C2410_BANKCON_PMCnorm (0x00)
89#define S3C2410_BANKCON_PMC4 (0x01)
90#define S3C2410_BANKCON_PMC8 (0x02)
91#define S3C2410_BANKCON_PMC16 (0x03)
92
93/* bank configurations for banks 0..7, note banks
94 * 6 and 7 have differnt configurations depending on
95 * the memory type bits */
96
97#define S3C2410_BANKCON_Tacp2 (0x0 << 2)
98#define S3C2410_BANKCON_Tacp3 (0x1 << 2)
99#define S3C2410_BANKCON_Tacp4 (0x2 << 2)
100#define S3C2410_BANKCON_Tacp6 (0x3 << 2)
101#define S3C2410_BANKCON_Tacp_SHIFT (2)
102
103#define S3C2410_BANKCON_Tcah0 (0x0 << 4)
104#define S3C2410_BANKCON_Tcah1 (0x1 << 4)
105#define S3C2410_BANKCON_Tcah2 (0x2 << 4)
106#define S3C2410_BANKCON_Tcah4 (0x3 << 4)
107#define S3C2410_BANKCON_Tcah_SHIFT (4)
108
109#define S3C2410_BANKCON_Tcoh0 (0x0 << 6)
110#define S3C2410_BANKCON_Tcoh1 (0x1 << 6)
111#define S3C2410_BANKCON_Tcoh2 (0x2 << 6)
112#define S3C2410_BANKCON_Tcoh4 (0x3 << 6)
113#define S3C2410_BANKCON_Tcoh_SHIFT (6)
114
115#define S3C2410_BANKCON_Tacc1 (0x0 << 8)
116#define S3C2410_BANKCON_Tacc2 (0x1 << 8)
117#define S3C2410_BANKCON_Tacc3 (0x2 << 8)
118#define S3C2410_BANKCON_Tacc4 (0x3 << 8)
119#define S3C2410_BANKCON_Tacc6 (0x4 << 8)
120#define S3C2410_BANKCON_Tacc8 (0x5 << 8)
121#define S3C2410_BANKCON_Tacc10 (0x6 << 8)
122#define S3C2410_BANKCON_Tacc14 (0x7 << 8)
123#define S3C2410_BANKCON_Tacc_SHIFT (8)
124
125#define S3C2410_BANKCON_Tcos0 (0x0 << 11)
126#define S3C2410_BANKCON_Tcos1 (0x1 << 11)
127#define S3C2410_BANKCON_Tcos2 (0x2 << 11)
128#define S3C2410_BANKCON_Tcos4 (0x3 << 11)
129#define S3C2410_BANKCON_Tcos_SHIFT (11)
130
131#define S3C2410_BANKCON_Tacs0 (0x0 << 13)
132#define S3C2410_BANKCON_Tacs1 (0x1 << 13)
133#define S3C2410_BANKCON_Tacs2 (0x2 << 13)
134#define S3C2410_BANKCON_Tacs4 (0x3 << 13)
135#define S3C2410_BANKCON_Tacs_SHIFT (13)
136
137#define S3C2410_BANKCON_SRAM (0x0 << 15)
138#define S3C2400_BANKCON_EDODRAM (0x2 << 15)
139#define S3C2410_BANKCON_SDRAM (0x3 << 15)
140
141/* next bits only for EDO DRAM in 6,7 */
142#define S3C2400_BANKCON_EDO_Trcd1 (0x00 << 4)
143#define S3C2400_BANKCON_EDO_Trcd2 (0x01 << 4)
144#define S3C2400_BANKCON_EDO_Trcd3 (0x02 << 4)
145#define S3C2400_BANKCON_EDO_Trcd4 (0x03 << 4)
146
147/* CAS pulse width */
148#define S3C2400_BANKCON_EDO_PULSE1 (0x00 << 3)
149#define S3C2400_BANKCON_EDO_PULSE2 (0x01 << 3)
150
151/* CAS pre-charge */
152#define S3C2400_BANKCON_EDO_TCP1 (0x00 << 2)
153#define S3C2400_BANKCON_EDO_TCP2 (0x01 << 2)
154
155/* control column address select */
156#define S3C2400_BANKCON_EDO_SCANb8 (0x00 << 0)
157#define S3C2400_BANKCON_EDO_SCANb9 (0x01 << 0)
158#define S3C2400_BANKCON_EDO_SCANb10 (0x02 << 0)
159#define S3C2400_BANKCON_EDO_SCANb11 (0x03 << 0)
160
161/* next bits only for SDRAM in 6,7 */
162#define S3C2410_BANKCON_Trcd2 (0x00 << 2)
163#define S3C2410_BANKCON_Trcd3 (0x01 << 2)
164#define S3C2410_BANKCON_Trcd4 (0x02 << 2)
165
166/* control column address select */
167#define S3C2410_BANKCON_SCANb8 (0x00 << 0)
168#define S3C2410_BANKCON_SCANb9 (0x01 << 0)
169#define S3C2410_BANKCON_SCANb10 (0x02 << 0)
170
171#define S3C2410_REFRESH S3C2410_MEMREG(0x0024)
172#define S3C2410_BANKSIZE S3C2410_MEMREG(0x0028)
173#define S3C2410_MRSRB6 S3C2410_MEMREG(0x002C)
174#define S3C2410_MRSRB7 S3C2410_MEMREG(0x0030)
175
176/* refresh control */
177
178#define S3C2410_REFRESH_REFEN (1<<23)
179#define S3C2410_REFRESH_SELF (1<<22)
180#define S3C2410_REFRESH_REFCOUNTER ((1<<11)-1)
181
182#define S3C2410_REFRESH_TRP_MASK (3<<20)
183#define S3C2410_REFRESH_TRP_2clk (0<<20)
184#define S3C2410_REFRESH_TRP_3clk (1<<20)
185#define S3C2410_REFRESH_TRP_4clk (2<<20)
186
187#define S3C2400_REFRESH_DRAM_TRP_MASK (3<<20)
188#define S3C2400_REFRESH_DRAM_TRP_1_5clk (0<<20)
189#define S3C2400_REFRESH_DRAM_TRP_2_5clk (1<<20)
190#define S3C2400_REFRESH_DRAM_TRP_3_5clk (2<<20)
191#define S3C2400_REFRESH_DRAM_TRP_4_5clk (3<<20)
192
193#define S3C2410_REFRESH_TSRC_MASK (3<<18)
194#define S3C2410_REFRESH_TSRC_4clk (0<<18)
195#define S3C2410_REFRESH_TSRC_5clk (1<<18)
196#define S3C2410_REFRESH_TSRC_6clk (2<<18)
197#define S3C2410_REFRESH_TSRC_7clk (3<<18)
198
199
200/* mode select register(s) */
201
202#define S3C2410_MRSRB_CL1 (0x00 << 4)
203#define S3C2410_MRSRB_CL2 (0x02 << 4)
204#define S3C2410_MRSRB_CL3 (0x03 << 4)
205
206/* bank size register */
207#define S3C2410_BANKSIZE_128M (0x2 << 0)
208#define S3C2410_BANKSIZE_64M (0x1 << 0)
209#define S3C2410_BANKSIZE_32M (0x0 << 0)
210#define S3C2410_BANKSIZE_16M (0x7 << 0)
211#define S3C2410_BANKSIZE_8M (0x6 << 0)
212#define S3C2410_BANKSIZE_4M (0x5 << 0)
213#define S3C2410_BANKSIZE_2M (0x4 << 0)
214#define S3C2410_BANKSIZE_MASK (0x7 << 0)
215#define S3C2400_BANKSIZE_MASK (0x4 << 0)
216#define S3C2410_BANKSIZE_SCLK_EN (1<<4)
217#define S3C2410_BANKSIZE_SCKE_EN (1<<5)
218#define S3C2410_BANKSIZE_BURST (1<<7)
219
220#endif /* __ASM_ARM_MEMREGS_H */
diff --git a/include/asm-arm/arch-s3c2410/regs-power.h b/include/asm-arm/arch-s3c2410/regs-power.h
deleted file mode 100644
index 13d13b7cfe98..000000000000
--- a/include/asm-arm/arch-s3c2410/regs-power.h
+++ /dev/null
@@ -1,40 +0,0 @@
1/* linux/include/asm-arm/arch-s3c2410/regs-power.h
2 *
3 * Copyright (c) 2003,2004,2005,2006 Simtec Electronics <linux@simtec.co.uk>
4 * http://armlinux.simtec.co.uk/
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
9 *
10 * S3C24XX power control register definitions
11*/
12
13#ifndef __ASM_ARM_REGS_PWR
14#define __ASM_ARM_REGS_PWR __FILE__
15
16#define S3C24XX_PWRREG(x) ((x) + S3C24XX_VA_CLKPWR)
17
18#define S3C2412_PWRMODECON S3C24XX_PWRREG(0x20)
19#define S3C2412_PWRCFG S3C24XX_PWRREG(0x24)
20
21#define S3C2412_INFORM0 S3C24XX_PWRREG(0x70)
22#define S3C2412_INFORM1 S3C24XX_PWRREG(0x74)
23#define S3C2412_INFORM2 S3C24XX_PWRREG(0x78)
24#define S3C2412_INFORM3 S3C24XX_PWRREG(0x7C)
25
26#define S3C2412_PWRCFG_BATF_IRQ (1<<0)
27#define S3C2412_PWRCFG_BATF_IGNORE (2<<0)
28#define S3C2412_PWRCFG_BATF_SLEEP (3<<0)
29#define S3C2412_PWRCFG_BATF_MASK (3<<0)
30
31#define S3C2412_PWRCFG_STANDBYWFI_IGNORE (0<<6)
32#define S3C2412_PWRCFG_STANDBYWFI_IDLE (1<<6)
33#define S3C2412_PWRCFG_STANDBYWFI_STOP (2<<6)
34#define S3C2412_PWRCFG_STANDBYWFI_SLEEP (3<<6)
35#define S3C2412_PWRCFG_STANDBYWFI_MASK (3<<6)
36
37#define S3C2412_PWRCFG_RTC_MASKIRQ (1<<8)
38#define S3C2412_PWRCFG_NAND_NORST (1<<9)
39
40#endif /* __ASM_ARM_REGS_PWR */
diff --git a/include/asm-arm/arch-s3c2410/regs-s3c2412-mem.h b/include/asm-arm/arch-s3c2410/regs-s3c2412-mem.h
deleted file mode 100644
index c8c793e78936..000000000000
--- a/include/asm-arm/arch-s3c2410/regs-s3c2412-mem.h
+++ /dev/null
@@ -1,29 +0,0 @@
1/* linux/include/asm-arm/arch-s3c2410/regs-s3c2412-mem.h
2 *
3 * Copyright (c) 2008 Simtec Electronics
4 * Ben Dooks <ben@simtec.co.uk>
5 * http://armlinux.simtec.co.uk/
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2 as
9 * published by the Free Software Foundation.
10 *
11 * S3C2412 memory register definitions
12*/
13
14#ifndef __ASM_ARM_REGS_S3C2412_MEM
15#define __ASM_ARM_REGS_S3C2412_MEM
16
17#ifndef S3C2412_MEMREG
18#define S3C2412_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x))
19#endif
20
21#define S3C2412_BANKCFG S3C2412_MEMREG(0x00)
22#define S3C2412_BANKCON1 S3C2412_MEMREG(0x04)
23#define S3C2412_BANKCON2 S3C2412_MEMREG(0x08)
24#define S3C2412_BANKCON3 S3C2412_MEMREG(0x0C)
25
26#define S3C2412_REFRESH S3C2412_MEMREG(0x10)
27#define S3C2412_TIMEOUT S3C2412_MEMREG(0x14)
28
29#endif /* __ASM_ARM_REGS_S3C2412_MEM */
diff --git a/include/asm-arm/arch-s3c2410/regs-s3c2412.h b/include/asm-arm/arch-s3c2410/regs-s3c2412.h
deleted file mode 100644
index 783b18f5bcea..000000000000
--- a/include/asm-arm/arch-s3c2410/regs-s3c2412.h
+++ /dev/null
@@ -1,23 +0,0 @@
1/* linux/include/asm-arm/arch-s3c2410/regs-s3c2412.h
2 *
3 * Copyright 2007 Simtec Electronics
4 * http://armlinux.simtec.co.uk/
5 * Ben Dooks <ben@simtec.co.uk>
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2 as
9 * published by the Free Software Foundation.
10 *
11 * S3C2412 specific register definitions
12*/
13
14#ifndef __ASM_ARCH_REGS_S3C2412_H
15#define __ASM_ARCH_REGS_S3C2412_H "s3c2412"
16
17#define S3C2412_SWRST (S3C24XX_VA_CLKPWR + 0x30)
18#define S3C2412_SWRST_RESET (0x533C2412)
19
20/* see regs-power.h for the other registers in the power block. */
21
22#endif /* __ASM_ARCH_REGS_S3C2412_H */
23
diff --git a/include/asm-arm/arch-s3c2410/regs-s3c2443-clock.h b/include/asm-arm/arch-s3c2410/regs-s3c2443-clock.h
deleted file mode 100644
index c1414658d1c5..000000000000
--- a/include/asm-arm/arch-s3c2410/regs-s3c2443-clock.h
+++ /dev/null
@@ -1,195 +0,0 @@
1/* linux/include/asm-arm/arch-s3c2410/regs-s3c2443-clock.h
2 *
3 * Copyright (c) 2007 Simtec Electronics
4 * Ben Dooks <ben@simtec.co.uk>
5 * http://armlinux.simtec.co.uk/
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2 as
9 * published by the Free Software Foundation.
10 *
11 * S3C2443 clock register definitions
12*/
13
14#ifndef __ASM_ARM_REGS_S3C2443_CLOCK
15#define __ASM_ARM_REGS_S3C2443_CLOCK
16
17#define S3C2443_CLKREG(x) ((x) + S3C24XX_VA_CLKPWR)
18
19#define S3C2443_PLLCON_MDIVSHIFT 16
20#define S3C2443_PLLCON_PDIVSHIFT 8
21#define S3C2443_PLLCON_SDIVSHIFT 0
22#define S3C2443_PLLCON_MDIVMASK ((1<<(1+(23-16)))-1)
23#define S3C2443_PLLCON_PDIVMASK ((1<<(1+(9-8)))-1)
24#define S3C2443_PLLCON_SDIVMASK (3)
25
26#define S3C2443_MPLLCON S3C2443_CLKREG(0x10)
27#define S3C2443_EPLLCON S3C2443_CLKREG(0x18)
28#define S3C2443_CLKSRC S3C2443_CLKREG(0x20)
29#define S3C2443_CLKDIV0 S3C2443_CLKREG(0x24)
30#define S3C2443_CLKDIV1 S3C2443_CLKREG(0x28)
31#define S3C2443_HCLKCON S3C2443_CLKREG(0x30)
32#define S3C2443_PCLKCON S3C2443_CLKREG(0x34)
33#define S3C2443_SCLKCON S3C2443_CLKREG(0x38)
34#define S3C2443_PWRMODE S3C2443_CLKREG(0x40)
35#define S3C2443_SWRST S3C2443_CLKREG(0x44)
36#define S3C2443_BUSPRI0 S3C2443_CLKREG(0x50)
37#define S3C2443_SYSID S3C2443_CLKREG(0x5C)
38#define S3C2443_PWRCFG S3C2443_CLKREG(0x60)
39#define S3C2443_RSTCON S3C2443_CLKREG(0x64)
40
41#define S3C2443_SWRST_RESET (0x533c2443)
42
43#define S3C2443_PLLCON_OFF (1<<24)
44
45#define S3C2443_CLKSRC_I2S_EXT (1<<14)
46#define S3C2443_CLKSRC_I2S_EPLLDIV (0<<14)
47#define S3C2443_CLKSRC_I2S_EPLLREF (2<<14)
48#define S3C2443_CLKSRC_I2S_EPLLREF3 (3<<14)
49#define S3C2443_CLKSRC_I2S_MASK (3<<14)
50
51#define S3C2443_CLKSRC_EPLLREF_XTAL (2<<8)
52#define S3C2443_CLKSRC_EPLLREF_EXTCLK (3<<8)
53#define S3C2443_CLKSRC_EPLLREF_MPLLREF (0<<8)
54#define S3C2443_CLKSRC_EPLLREF_MPLLREF2 (1<<8)
55#define S3C2443_CLKSRC_EPLLREF_MASK (3<<8)
56
57#define S3C2443_CLKSRC_ESYSCLK_EPLL (1<<6)
58#define S3C2443_CLKSRC_MSYSCLK_MPLL (1<<4)
59#define S3C2443_CLKSRC_EXTCLK_DIV (1<<3)
60
61#define S3C2443_CLKDIV0_DVS (1<<13)
62#define S3C2443_CLKDIV0_HALF_HCLK (1<<3)
63#define S3C2443_CLKDIV0_HALF_PCLK (1<<2)
64
65#define S3C2443_CLKDIV0_HCLKDIV_MASK (3<<0)
66
67#define S3C2443_CLKDIV0_EXTDIV_MASK (3<<6)
68#define S3C2443_CLKDIV0_EXTDIV_SHIFT (6)
69
70#define S3C2443_CLKDIV0_PREDIV_MASK (3<<4)
71#define S3C2443_CLKDIV0_PREDIV_SHIFT (4)
72
73#define S3C2443_CLKDIV0_ARMDIV_MASK (15<<9)
74#define S3C2443_CLKDIV0_ARMDIV_SHIFT (9)
75#define S3C2443_CLKDIV0_ARMDIV_1 (0<<9)
76#define S3C2443_CLKDIV0_ARMDIV_2 (8<<9)
77#define S3C2443_CLKDIV0_ARMDIV_3 (2<<9)
78#define S3C2443_CLKDIV0_ARMDIV_4 (9<<9)
79#define S3C2443_CLKDIV0_ARMDIV_6 (10<<9)
80#define S3C2443_CLKDIV0_ARMDIV_8 (11<<9)
81#define S3C2443_CLKDIV0_ARMDIV_12 (13<<9)
82#define S3C2443_CLKDIV0_ARMDIV_16 (15<<9)
83
84/* S3C2443_CLKDIV1 */
85
86#define S3C2443_CLKDIV1_CAMDIV_MASK (15<<26)
87#define S3C2443_CLKDIV1_CAMDIV_SHIFT (26)
88
89#define S3C2443_CLKDIV1_HSSPIDIV_MASK (3<<24)
90#define S3C2443_CLKDIV1_HSSPIDIV_SHIFT (24)
91
92#define S3C2443_CLKDIV1_DISPDIV_MASK (0xff<<16)
93#define S3C2443_CLKDIV1_DISPDIV_SHIFT (16)
94
95#define S3C2443_CLKDIV1_I2SDIV_MASK (15<<12)
96#define S3C2443_CLKDIV1_I2SDIV_SHIFT (12)
97
98#define S3C2443_CLKDIV1_UARTDIV_MASK (15<<8)
99#define S3C2443_CLKDIV1_UARTDIV_SHIFT (8)
100
101#define S3C2443_CLKDIV1_HSMMCDIV_MASK (3<<6)
102#define S3C2443_CLKDIV1_HSMMCDIV_SHIFT (6)
103
104#define S3C2443_CLKDIV1_USBHOSTDIV_MASK (3<<4)
105#define S3C2443_CLKDIV1_USBHOSTDIV_SHIFT (4)
106
107#define S3C2443_CLKCON_NAND
108
109#define S3C2443_HCLKCON_DMA0 (1<<0)
110#define S3C2443_HCLKCON_DMA1 (1<<1)
111#define S3C2443_HCLKCON_DMA2 (1<<2)
112#define S3C2443_HCLKCON_DMA3 (1<<3)
113#define S3C2443_HCLKCON_DMA4 (1<<4)
114#define S3C2443_HCLKCON_DMA5 (1<<5)
115#define S3C2443_HCLKCON_CAMIF (1<<8)
116#define S3C2443_HCLKCON_DISP (1<<9)
117#define S3C2443_HCLKCON_LCDC (1<<10)
118#define S3C2443_HCLKCON_USBH (1<<11)
119#define S3C2443_HCLKCON_USBD (1<<12)
120#define S3C2443_HCLKCON_HSMMC (1<<16)
121#define S3C2443_HCLKCON_CFC (1<<17)
122#define S3C2443_HCLKCON_SSMC (1<<18)
123#define S3C2443_HCLKCON_DRAMC (1<<19)
124
125#define S3C2443_PCLKCON_UART0 (1<<0)
126#define S3C2443_PCLKCON_UART1 (1<<1)
127#define S3C2443_PCLKCON_UART2 (1<<2)
128#define S3C2443_PCLKCON_UART3 (1<<3)
129#define S3C2443_PCLKCON_IIC (1<<4)
130#define S3C2443_PCLKCON_SDI (1<<5)
131#define S3C2443_PCLKCON_ADC (1<<7)
132#define S3C2443_PCLKCON_AC97 (1<<8)
133#define S3C2443_PCLKCON_IIS (1<<9)
134#define S3C2443_PCLKCON_PWMT (1<<10)
135#define S3C2443_PCLKCON_WDT (1<<11)
136#define S3C2443_PCLKCON_RTC (1<<12)
137#define S3C2443_PCLKCON_GPIO (1<<13)
138#define S3C2443_PCLKCON_SPI0 (1<<14)
139#define S3C2443_PCLKCON_SPI1 (1<<15)
140
141#define S3C2443_SCLKCON_DDRCLK (1<<16)
142#define S3C2443_SCLKCON_SSMCCLK (1<<15)
143#define S3C2443_SCLKCON_HSSPICLK (1<<14)
144#define S3C2443_SCLKCON_HSMMCCLK_EXT (1<<13)
145#define S3C2443_SCLKCON_HSMMCCLK_EPLL (1<<12)
146#define S3C2443_SCLKCON_CAMCLK (1<<11)
147#define S3C2443_SCLKCON_DISPCLK (1<<10)
148#define S3C2443_SCLKCON_I2SCLK (1<<9)
149#define S3C2443_SCLKCON_UARTCLK (1<<8)
150#define S3C2443_SCLKCON_USBHOST (1<<1)
151
152#include <asm/div64.h>
153
154static inline unsigned int
155s3c2443_get_mpll(unsigned int pllval, unsigned int baseclk)
156{
157 unsigned int mdiv, pdiv, sdiv;
158 uint64_t fvco;
159
160 mdiv = pllval >> S3C2443_PLLCON_MDIVSHIFT;
161 pdiv = pllval >> S3C2443_PLLCON_PDIVSHIFT;
162 sdiv = pllval >> S3C2443_PLLCON_SDIVSHIFT;
163
164 mdiv &= S3C2443_PLLCON_MDIVMASK;
165 pdiv &= S3C2443_PLLCON_PDIVMASK;
166 sdiv &= S3C2443_PLLCON_SDIVMASK;
167
168 fvco = (uint64_t)baseclk * (2 * (mdiv + 8));
169 do_div(fvco, pdiv << sdiv);
170
171 return (unsigned int)fvco;
172}
173
174static inline unsigned int
175s3c2443_get_epll(unsigned int pllval, unsigned int baseclk)
176{
177 unsigned int mdiv, pdiv, sdiv;
178 uint64_t fvco;
179
180 mdiv = pllval >> S3C2443_PLLCON_MDIVSHIFT;
181 pdiv = pllval >> S3C2443_PLLCON_PDIVSHIFT;
182 sdiv = pllval >> S3C2443_PLLCON_SDIVSHIFT;
183
184 mdiv &= S3C2443_PLLCON_MDIVMASK;
185 pdiv &= S3C2443_PLLCON_PDIVMASK;
186 sdiv &= S3C2443_PLLCON_SDIVMASK;
187
188 fvco = (uint64_t)baseclk * (mdiv + 8);
189 do_div(fvco, (pdiv + 2) << sdiv);
190
191 return (unsigned int)fvco;
192}
193
194#endif /* __ASM_ARM_REGS_S3C2443_CLOCK */
195
diff --git a/include/asm-arm/arch-s3c2410/regs-sdi.h b/include/asm-arm/arch-s3c2410/regs-sdi.h
deleted file mode 100644
index bfb222fa4abb..000000000000
--- a/include/asm-arm/arch-s3c2410/regs-sdi.h
+++ /dev/null
@@ -1,127 +0,0 @@
1/* linux/include/asm-arm/arch-s3c2410/regs-sdi.h
2 *
3 * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
4 * http://www.simtec.co.uk/products/SWLINUX/
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
9 *
10 * S3C2410 MMC/SDIO register definitions
11*/
12
13#ifndef __ASM_ARM_REGS_SDI
14#define __ASM_ARM_REGS_SDI "regs-sdi.h"
15
16#define S3C2410_SDICON (0x00)
17#define S3C2410_SDIPRE (0x04)
18#define S3C2410_SDICMDARG (0x08)
19#define S3C2410_SDICMDCON (0x0C)
20#define S3C2410_SDICMDSTAT (0x10)
21#define S3C2410_SDIRSP0 (0x14)
22#define S3C2410_SDIRSP1 (0x18)
23#define S3C2410_SDIRSP2 (0x1C)
24#define S3C2410_SDIRSP3 (0x20)
25#define S3C2410_SDITIMER (0x24)
26#define S3C2410_SDIBSIZE (0x28)
27#define S3C2410_SDIDCON (0x2C)
28#define S3C2410_SDIDCNT (0x30)
29#define S3C2410_SDIDSTA (0x34)
30#define S3C2410_SDIFSTA (0x38)
31
32#define S3C2410_SDIDATA (0x3C)
33#define S3C2410_SDIIMSK (0x40)
34
35#define S3C2440_SDIDATA (0x40)
36#define S3C2440_SDIIMSK (0x3C)
37
38#define S3C2440_SDICON_SDRESET (1<<8)
39#define S3C2440_SDICON_MMCCLOCK (1<<5)
40#define S3C2410_SDICON_BYTEORDER (1<<4)
41#define S3C2410_SDICON_SDIOIRQ (1<<3)
42#define S3C2410_SDICON_RWAITEN (1<<2)
43#define S3C2410_SDICON_FIFORESET (1<<1)
44#define S3C2410_SDICON_CLOCKTYPE (1<<0)
45
46#define S3C2410_SDICMDCON_ABORT (1<<12)
47#define S3C2410_SDICMDCON_WITHDATA (1<<11)
48#define S3C2410_SDICMDCON_LONGRSP (1<<10)
49#define S3C2410_SDICMDCON_WAITRSP (1<<9)
50#define S3C2410_SDICMDCON_CMDSTART (1<<8)
51#define S3C2410_SDICMDCON_SENDERHOST (1<<6)
52#define S3C2410_SDICMDCON_INDEX (0x3f)
53
54#define S3C2410_SDICMDSTAT_CRCFAIL (1<<12)
55#define S3C2410_SDICMDSTAT_CMDSENT (1<<11)
56#define S3C2410_SDICMDSTAT_CMDTIMEOUT (1<<10)
57#define S3C2410_SDICMDSTAT_RSPFIN (1<<9)
58#define S3C2410_SDICMDSTAT_XFERING (1<<8)
59#define S3C2410_SDICMDSTAT_INDEX (0xff)
60
61#define S3C2440_SDIDCON_DS_BYTE (0<<22)
62#define S3C2440_SDIDCON_DS_HALFWORD (1<<22)
63#define S3C2440_SDIDCON_DS_WORD (2<<22)
64#define S3C2410_SDIDCON_IRQPERIOD (1<<21)
65#define S3C2410_SDIDCON_TXAFTERRESP (1<<20)
66#define S3C2410_SDIDCON_RXAFTERCMD (1<<19)
67#define S3C2410_SDIDCON_BUSYAFTERCMD (1<<18)
68#define S3C2410_SDIDCON_BLOCKMODE (1<<17)
69#define S3C2410_SDIDCON_WIDEBUS (1<<16)
70#define S3C2410_SDIDCON_DMAEN (1<<15)
71#define S3C2410_SDIDCON_STOP (1<<14)
72#define S3C2440_SDIDCON_DATSTART (1<<14)
73#define S3C2410_SDIDCON_DATMODE (3<<12)
74#define S3C2410_SDIDCON_BLKNUM (0x7ff)
75
76/* constants for S3C2410_SDIDCON_DATMODE */
77#define S3C2410_SDIDCON_XFER_READY (0<<12)
78#define S3C2410_SDIDCON_XFER_CHKSTART (1<<12)
79#define S3C2410_SDIDCON_XFER_RXSTART (2<<12)
80#define S3C2410_SDIDCON_XFER_TXSTART (3<<12)
81
82#define S3C2410_SDIDCON_BLKNUM_MASK (0xFFF)
83#define S3C2410_SDIDCNT_BLKNUM_SHIFT (12)
84
85#define S3C2410_SDIDSTA_RDYWAITREQ (1<<10)
86#define S3C2410_SDIDSTA_SDIOIRQDETECT (1<<9)
87#define S3C2410_SDIDSTA_FIFOFAIL (1<<8) /* reserved on 2440 */
88#define S3C2410_SDIDSTA_CRCFAIL (1<<7)
89#define S3C2410_SDIDSTA_RXCRCFAIL (1<<6)
90#define S3C2410_SDIDSTA_DATATIMEOUT (1<<5)
91#define S3C2410_SDIDSTA_XFERFINISH (1<<4)
92#define S3C2410_SDIDSTA_BUSYFINISH (1<<3)
93#define S3C2410_SDIDSTA_SBITERR (1<<2) /* reserved on 2410a/2440 */
94#define S3C2410_SDIDSTA_TXDATAON (1<<1)
95#define S3C2410_SDIDSTA_RXDATAON (1<<0)
96
97#define S3C2440_SDIFSTA_FIFORESET (1<<16)
98#define S3C2440_SDIFSTA_FIFOFAIL (3<<14) /* 3 is correct (2 bits) */
99#define S3C2410_SDIFSTA_TFDET (1<<13)
100#define S3C2410_SDIFSTA_RFDET (1<<12)
101#define S3C2410_SDIFSTA_TFHALF (1<<11)
102#define S3C2410_SDIFSTA_TFEMPTY (1<<10)
103#define S3C2410_SDIFSTA_RFLAST (1<<9)
104#define S3C2410_SDIFSTA_RFFULL (1<<8)
105#define S3C2410_SDIFSTA_RFHALF (1<<7)
106#define S3C2410_SDIFSTA_COUNTMASK (0x7f)
107
108#define S3C2410_SDIIMSK_RESPONSECRC (1<<17)
109#define S3C2410_SDIIMSK_CMDSENT (1<<16)
110#define S3C2410_SDIIMSK_CMDTIMEOUT (1<<15)
111#define S3C2410_SDIIMSK_RESPONSEND (1<<14)
112#define S3C2410_SDIIMSK_READWAIT (1<<13)
113#define S3C2410_SDIIMSK_SDIOIRQ (1<<12)
114#define S3C2410_SDIIMSK_FIFOFAIL (1<<11)
115#define S3C2410_SDIIMSK_CRCSTATUS (1<<10)
116#define S3C2410_SDIIMSK_DATACRC (1<<9)
117#define S3C2410_SDIIMSK_DATATIMEOUT (1<<8)
118#define S3C2410_SDIIMSK_DATAFINISH (1<<7)
119#define S3C2410_SDIIMSK_BUSYFINISH (1<<6)
120#define S3C2410_SDIIMSK_SBITERR (1<<5) /* reserved 2440/2410a */
121#define S3C2410_SDIIMSK_TXFIFOHALF (1<<4)
122#define S3C2410_SDIIMSK_TXFIFOEMPTY (1<<3)
123#define S3C2410_SDIIMSK_RXFIFOLAST (1<<2)
124#define S3C2410_SDIIMSK_RXFIFOFULL (1<<1)
125#define S3C2410_SDIIMSK_RXFIFOHALF (1<<0)
126
127#endif /* __ASM_ARM_REGS_SDI */
diff --git a/include/asm-arm/arch-s3c2410/reset.h b/include/asm-arm/arch-s3c2410/reset.h
deleted file mode 100644
index 4f866cdecab0..000000000000
--- a/include/asm-arm/arch-s3c2410/reset.h
+++ /dev/null
@@ -1,22 +0,0 @@
1/* linux/include/asm-arm/arch-s3c2410/reset.h
2 *
3 * Copyright (c) 2007 Simtec Electronics
4 * Ben Dooks <ben@simtec.co.uk>
5 * http://armlinux.simtec.co.uk/
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2 as
9 * published by the Free Software Foundation.
10 *
11 * S3C2410 CPU reset controls
12*/
13
14#ifndef __ASM_ARCH_RESET_H
15#define __ASM_ARCH_RESET_H __FILE__
16
17/* This allows the over-ride of the default reset code
18*/
19
20extern void (*s3c24xx_reset_hook)(void);
21
22#endif /* __ASM_ARCH_RESET_H */
diff --git a/include/asm-arm/arch-s3c2410/spi-gpio.h b/include/asm-arm/arch-s3c2410/spi-gpio.h
deleted file mode 100644
index 73803731142a..000000000000
--- a/include/asm-arm/arch-s3c2410/spi-gpio.h
+++ /dev/null
@@ -1,27 +0,0 @@
1/* linux/include/asm-arm/arch-s3c2410/spi-gpio.h
2 *
3 * Copyright (c) 2006 Simtec Electronics
4 * Ben Dooks <ben@simtec.co.uk>
5 *
6 * S3C2410 - SPI Controller platfrom_device info
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
11*/
12
13#ifndef __ASM_ARCH_SPIGPIO_H
14#define __ASM_ARCH_SPIGPIO_H __FILE__
15
16struct s3c2410_spigpio_info {
17 unsigned long pin_clk;
18 unsigned long pin_mosi;
19 unsigned long pin_miso;
20
21 int bus_num;
22
23 void (*chip_select)(struct s3c2410_spigpio_info *spi, int cs);
24};
25
26
27#endif /* __ASM_ARCH_SPIGPIO_H */
diff --git a/include/asm-arm/arch-s3c2410/spi.h b/include/asm-arm/arch-s3c2410/spi.h
deleted file mode 100644
index 442169887d3b..000000000000
--- a/include/asm-arm/arch-s3c2410/spi.h
+++ /dev/null
@@ -1,25 +0,0 @@
1/* linux/include/asm-arm/arch-s3c2410/spi.h
2 *
3 * Copyright (c) 2006 Simtec Electronics
4 * Ben Dooks <ben@simtec.co.uk>
5 *
6 * S3C2410 - SPI Controller platform_device info
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
11*/
12
13#ifndef __ASM_ARCH_SPI_H
14#define __ASM_ARCH_SPI_H __FILE__
15
16struct s3c2410_spi_info {
17 unsigned long pin_cs; /* simple gpio cs */
18 unsigned int num_cs; /* total chipselects */
19 int bus_num; /* bus number to use. */
20
21 void (*set_cs)(struct s3c2410_spi_info *spi, int cs, int pol);
22};
23
24
25#endif /* __ASM_ARCH_SPI_H */
diff --git a/include/asm-arm/arch-s3c2410/system-reset.h b/include/asm-arm/arch-s3c2410/system-reset.h
deleted file mode 100644
index beeec770dcf7..000000000000
--- a/include/asm-arm/arch-s3c2410/system-reset.h
+++ /dev/null
@@ -1,64 +0,0 @@
1/* linux/include/asm-arm/arch-s3c2410/system-reset.h
2 *
3 * Copyright (c) 2008 Simtec Electronics
4 * Ben Dooks <ben@simtec.co.uk>
5 *
6 * S3C2410 - System define for arch_reset() function
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
11*/
12
13#include <asm/arch/hardware.h>
14#include <asm/io.h>
15
16#include <asm/plat-s3c/regs-watchdog.h>
17#include <asm/arch/regs-clock.h>
18
19#include <linux/clk.h>
20#include <linux/err.h>
21
22extern void (*s3c24xx_reset_hook)(void);
23
24static void
25arch_reset(char mode)
26{
27 struct clk *wdtclk;
28
29 if (mode == 's') {
30 cpu_reset(0);
31 }
32
33 if (s3c24xx_reset_hook)
34 s3c24xx_reset_hook();
35
36 printk("arch_reset: attempting watchdog reset\n");
37
38 __raw_writel(0, S3C2410_WTCON); /* disable watchdog, to be safe */
39
40 wdtclk = clk_get(NULL, "watchdog");
41 if (!IS_ERR(wdtclk)) {
42 clk_enable(wdtclk);
43 } else
44 printk(KERN_WARNING "%s: warning: cannot get watchdog clock\n", __func__);
45
46 /* put initial values into count and data */
47 __raw_writel(0x80, S3C2410_WTCNT);
48 __raw_writel(0x80, S3C2410_WTDAT);
49
50 /* set the watchdog to go and reset... */
51 __raw_writel(S3C2410_WTCON_ENABLE|S3C2410_WTCON_DIV16|S3C2410_WTCON_RSTEN |
52 S3C2410_WTCON_PRESCALE(0x20), S3C2410_WTCON);
53
54 /* wait for reset to assert... */
55 mdelay(500);
56
57 printk(KERN_ERR "Watchdog reset failed to assert reset\n");
58
59 /* delay to allow the serial port to show the message */
60 mdelay(50);
61
62 /* we'll take a jump through zero as a poor second */
63 cpu_reset(0);
64}
diff --git a/include/asm-arm/arch-s3c2410/system.h b/include/asm-arm/arch-s3c2410/system.h
deleted file mode 100644
index 98f690e7d33e..000000000000
--- a/include/asm-arm/arch-s3c2410/system.h
+++ /dev/null
@@ -1,58 +0,0 @@
1/* linux/include/asm-arm/arch-s3c2410/system.h
2 *
3 * Copyright (c) 2003 Simtec Electronics
4 * Ben Dooks <ben@simtec.co.uk>
5 *
6 * S3C2410 - System function defines and includes
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
11*/
12
13#include <asm/arch/hardware.h>
14#include <asm/io.h>
15
16#include <asm/arch/map.h>
17#include <asm/arch/idle.h>
18#include <asm/arch/reset.h>
19
20#include <asm/arch/regs-clock.h>
21
22void (*s3c24xx_idle)(void);
23void (*s3c24xx_reset_hook)(void);
24
25void s3c24xx_default_idle(void)
26{
27 unsigned long tmp;
28 int i;
29
30 /* idle the system by using the idle mode which will wait for an
31 * interrupt to happen before restarting the system.
32 */
33
34 /* Warning: going into idle state upsets jtag scanning */
35
36 __raw_writel(__raw_readl(S3C2410_CLKCON) | S3C2410_CLKCON_IDLE,
37 S3C2410_CLKCON);
38
39 /* the samsung port seems to do a loop and then unset idle.. */
40 for (i = 0; i < 50; i++) {
41 tmp += __raw_readl(S3C2410_CLKCON); /* ensure loop not optimised out */
42 }
43
44 /* this bit is not cleared on re-start... */
45
46 __raw_writel(__raw_readl(S3C2410_CLKCON) & ~S3C2410_CLKCON_IDLE,
47 S3C2410_CLKCON);
48}
49
50static void arch_idle(void)
51{
52 if (s3c24xx_idle != NULL)
53 (s3c24xx_idle)();
54 else
55 s3c24xx_default_idle();
56}
57
58#include <asm/arch/system-reset.h>
diff --git a/include/asm-arm/arch-s3c2410/timex.h b/include/asm-arm/arch-s3c2410/timex.h
deleted file mode 100644
index c16a99c5a59a..000000000000
--- a/include/asm-arm/arch-s3c2410/timex.h
+++ /dev/null
@@ -1,26 +0,0 @@
1/* linux/include/asm-arm/arch-s3c2410/timex.h
2 *
3 * Copyright (c) 2003-2005 Simtec Electronics
4 * Ben Dooks <ben@simtec.co.uk>
5 *
6 * S3C2410 - time parameters
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
11*/
12
13#ifndef __ASM_ARCH_TIMEX_H
14#define __ASM_ARCH_TIMEX_H
15
16/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it
17 * a variable is useless. It seems as long as we make our timers an
18 * exact multiple of HZ, any value that makes a 1->1 correspondence
19 * for the time conversion functions to/from jiffies is acceptable.
20*/
21
22
23#define CLOCK_TICK_RATE 12000000
24
25
26#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/include/asm-arm/arch-s3c2410/uncompress.h b/include/asm-arm/arch-s3c2410/uncompress.h
deleted file mode 100644
index 48a5731ee988..000000000000
--- a/include/asm-arm/arch-s3c2410/uncompress.h
+++ /dev/null
@@ -1,52 +0,0 @@
1/* linux/include/asm-arm/arch-s3c2410/uncompress.h
2 *
3 * Copyright (c) 2003, 2007 Simtec Electronics
4 * http://armlinux.simtec.co.uk/
5 * Ben Dooks <ben@simtec.co.uk>
6 *
7 * S3C2410 - uncompress code
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
12*/
13
14#ifndef __ASM_ARCH_UNCOMPRESS_H
15#define __ASM_ARCH_UNCOMPRESS_H
16
17#include <asm/arch/regs-gpio.h>
18#include <asm/arch/map.h>
19
20/* working in physical space... */
21#undef S3C2410_GPIOREG
22#define S3C2410_GPIOREG(x) ((S3C24XX_PA_GPIO + (x)))
23
24#include <asm/plat-s3c/uncompress.h>
25
26static inline int is_arm926(void)
27{
28 unsigned int cpuid;
29
30 asm volatile ("mrc p15, 0, %0, c1, c0, 0" : "=r" (cpuid));
31
32 return ((cpuid & 0xff0) == 0x260);
33}
34
35static void arch_detect_cpu(void)
36{
37 unsigned int cpuid;
38
39 cpuid = *((volatile unsigned int *)S3C2410_GSTATUS1);
40 cpuid &= S3C2410_GSTATUS1_IDMASK;
41
42 if (is_arm926() || cpuid == S3C2410_GSTATUS1_2440 ||
43 cpuid == S3C2410_GSTATUS1_2442) {
44 fifo_mask = S3C2440_UFSTAT_TXMASK;
45 fifo_max = 63 << S3C2440_UFSTAT_TXSHIFT;
46 } else {
47 fifo_mask = S3C2410_UFSTAT_TXMASK;
48 fifo_max = 15 << S3C2410_UFSTAT_TXSHIFT;
49 }
50}
51
52#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/include/asm-arm/arch-s3c2410/usb-control.h b/include/asm-arm/arch-s3c2410/usb-control.h
deleted file mode 100644
index 5bfa376e33dc..000000000000
--- a/include/asm-arm/arch-s3c2410/usb-control.h
+++ /dev/null
@@ -1,41 +0,0 @@
1/* linux/include/asm-arm/arch-s3c2410/usb-control.h
2 *
3 * Copyright (c) 2004 Simtec Electronics
4 * Ben Dooks <ben@simtec.co.uk>
5 *
6 * S3C2410 - usb port information
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
11*/
12
13#ifndef __ASM_ARCH_USBCONTROL_H
14#define __ASM_ARCH_USBCONTROL_H "include/asm-arm/arch-s3c2410/usb-control.h"
15
16#define S3C_HCDFLG_USED (1)
17
18struct s3c2410_hcd_port {
19 unsigned char flags;
20 unsigned char power;
21 unsigned char oc_status;
22 unsigned char oc_changed;
23};
24
25struct s3c2410_hcd_info {
26 struct usb_hcd *hcd;
27 struct s3c2410_hcd_port port[2];
28
29 void (*power_control)(int port, int to);
30 void (*enable_oc)(struct s3c2410_hcd_info *, int on);
31 void (*report_oc)(struct s3c2410_hcd_info *, int ports);
32};
33
34static void inline s3c2410_usb_report_oc(struct s3c2410_hcd_info *info, int ports)
35{
36 if (info->report_oc != NULL) {
37 (info->report_oc)(info, ports);
38 }
39}
40
41#endif /*__ASM_ARCH_USBCONTROL_H */
diff --git a/include/asm-arm/arch-s3c2410/vmalloc.h b/include/asm-arm/arch-s3c2410/vmalloc.h
deleted file mode 100644
index 0ae3bdb7e03b..000000000000
--- a/include/asm-arm/arch-s3c2410/vmalloc.h
+++ /dev/null
@@ -1,20 +0,0 @@
1/* linux/include/asm-arm/arch-s3c2410/vmalloc.h
2 *
3 * from linux/include/asm-arm/arch-iop3xx/vmalloc.h
4 *
5 * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
6 * http://www.simtec.co.uk/products/SWLINUX/
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
11 *
12 * S3C2410 vmalloc definition
13*/
14
15#ifndef __ASM_ARCH_VMALLOC_H
16#define __ASM_ARCH_VMALLOC_H
17
18#define VMALLOC_END (0xE0000000)
19
20#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/include/asm-arm/arch-s3c2410/vr1000-cpld.h b/include/asm-arm/arch-s3c2410/vr1000-cpld.h
deleted file mode 100644
index 0557b0a5ab1d..000000000000
--- a/include/asm-arm/arch-s3c2410/vr1000-cpld.h
+++ /dev/null
@@ -1,18 +0,0 @@
1/* linux/include/asm-arm/arch-s3c2410/vr1000-cpld.h
2 *
3 * Copyright (c) 2003 Simtec Electronics
4 * Ben Dooks <ben@simtec.co.uk>
5 *
6 * VR1000 - CPLD control constants
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
11*/
12
13#ifndef __ASM_ARCH_VR1000CPLD_H
14#define __ASM_ARCH_VR1000CPLD_H
15
16#define VR1000_CPLD_CTRL2_RAMWEN (0x04) /* SRAM Write Enable */
17
18#endif /* __ASM_ARCH_VR1000CPLD_H */
diff --git a/include/asm-arm/arch-s3c2410/vr1000-irq.h b/include/asm-arm/arch-s3c2410/vr1000-irq.h
deleted file mode 100644
index 890937083c61..000000000000
--- a/include/asm-arm/arch-s3c2410/vr1000-irq.h
+++ /dev/null
@@ -1,26 +0,0 @@
1/* linux/include/asm-arm/arch-s3c2410/vr1000-irq.h
2 *
3 * Copyright (c) 2003,2004 Simtec Electronics
4 * Ben Dooks <ben@simtec.co.uk>
5 *
6 * Machine VR1000 - IRQ Number definitions
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
11*/
12
13#ifndef __ASM_ARCH_VR1000IRQ_H
14#define __ASM_ARCH_VR1000IRQ_H
15
16/* irq numbers to onboard peripherals */
17
18#define IRQ_USBOC IRQ_EINT19
19#define IRQ_IDE0 IRQ_EINT16
20#define IRQ_IDE1 IRQ_EINT17
21#define IRQ_VR1000_SERIAL IRQ_EINT12
22#define IRQ_VR1000_DM9000A IRQ_EINT10
23#define IRQ_VR1000_DM9000N IRQ_EINT9
24#define IRQ_SMALERT IRQ_EINT8
25
26#endif /* __ASM_ARCH_VR1000IRQ_H */
diff --git a/include/asm-arm/arch-s3c2410/vr1000-map.h b/include/asm-arm/arch-s3c2410/vr1000-map.h
deleted file mode 100644
index 92a56a724a8c..000000000000
--- a/include/asm-arm/arch-s3c2410/vr1000-map.h
+++ /dev/null
@@ -1,110 +0,0 @@
1/* linux/include/asm-arm/arch-s3c2410/vr1000-map.h
2 *
3 * Copyright (c) 2003-2005 Simtec Electronics
4 * Ben Dooks <ben@simtec.co.uk>
5 *
6 * Machine VR1000 - Memory map definitions
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
11*/
12
13/* needs arch/map.h including with this */
14
15/* ok, we've used up to 0x13000000, now we need to find space for the
16 * peripherals that live in the nGCS[x] areas, which are quite numerous
17 * in their space. We also have the board's CPLD to find register space
18 * for.
19 */
20
21#ifndef __ASM_ARCH_VR1000MAP_H
22#define __ASM_ARCH_VR1000MAP_H
23
24#include <asm/arch/bast-map.h>
25
26#define VR1000_IOADDR(x) BAST_IOADDR(x)
27
28/* we put the CPLD registers next, to get them out of the way */
29
30#define VR1000_VA_CTRL1 VR1000_IOADDR(0x00000000) /* 0x01300000 */
31#define VR1000_PA_CTRL1 (S3C2410_CS5 | 0x7800000)
32
33#define VR1000_VA_CTRL2 VR1000_IOADDR(0x00100000) /* 0x01400000 */
34#define VR1000_PA_CTRL2 (S3C2410_CS1 | 0x6000000)
35
36#define VR1000_VA_CTRL3 VR1000_IOADDR(0x00200000) /* 0x01500000 */
37#define VR1000_PA_CTRL3 (S3C2410_CS1 | 0x6800000)
38
39#define VR1000_VA_CTRL4 VR1000_IOADDR(0x00300000) /* 0x01600000 */
40#define VR1000_PA_CTRL4 (S3C2410_CS1 | 0x7000000)
41
42/* next, we have the PC104 ISA interrupt registers */
43
44#define VR1000_PA_PC104_IRQREQ (S3C2410_CS5 | 0x6000000) /* 0x01700000 */
45#define VR1000_VA_PC104_IRQREQ VR1000_IOADDR(0x00400000)
46
47#define VR1000_PA_PC104_IRQRAW (S3C2410_CS5 | 0x6800000) /* 0x01800000 */
48#define VR1000_VA_PC104_IRQRAW VR1000_IOADDR(0x00500000)
49
50#define VR1000_PA_PC104_IRQMASK (S3C2410_CS5 | 0x7000000) /* 0x01900000 */
51#define VR1000_VA_PC104_IRQMASK VR1000_IOADDR(0x00600000)
52
53/* 0xE0000000 contains the IO space that is split by speed and
54 * wether the access is for 8 or 16bit IO... this ensures that
55 * the correct access is made
56 *
57 * 0x10000000 of space, partitioned as so:
58 *
59 * 0x00000000 to 0x04000000 8bit, slow
60 * 0x04000000 to 0x08000000 16bit, slow
61 * 0x08000000 to 0x0C000000 16bit, net
62 * 0x0C000000 to 0x10000000 16bit, fast
63 *
64 * each of these spaces has the following in:
65 *
66 * 0x02000000 to 0x02100000 1MB IDE primary channel
67 * 0x02100000 to 0x02200000 1MB IDE primary channel aux
68 * 0x02200000 to 0x02400000 1MB IDE secondary channel
69 * 0x02300000 to 0x02400000 1MB IDE secondary channel aux
70 * 0x02500000 to 0x02600000 1MB Davicom DM9000 ethernet controllers
71 * 0x02600000 to 0x02700000 1MB
72 *
73 * the phyiscal layout of the zones are:
74 * nGCS2 - 8bit, slow
75 * nGCS3 - 16bit, slow
76 * nGCS4 - 16bit, net
77 * nGCS5 - 16bit, fast
78 */
79
80#define VR1000_VA_MULTISPACE (0xE0000000)
81
82#define VR1000_VA_ISAIO (VR1000_VA_MULTISPACE + 0x00000000)
83#define VR1000_VA_ISAMEM (VR1000_VA_MULTISPACE + 0x01000000)
84#define VR1000_VA_IDEPRI (VR1000_VA_MULTISPACE + 0x02000000)
85#define VR1000_VA_IDEPRIAUX (VR1000_VA_MULTISPACE + 0x02100000)
86#define VR1000_VA_IDESEC (VR1000_VA_MULTISPACE + 0x02200000)
87#define VR1000_VA_IDESECAUX (VR1000_VA_MULTISPACE + 0x02300000)
88#define VR1000_VA_ASIXNET (VR1000_VA_MULTISPACE + 0x02400000)
89#define VR1000_VA_DM9000 (VR1000_VA_MULTISPACE + 0x02500000)
90#define VR1000_VA_SUPERIO (VR1000_VA_MULTISPACE + 0x02600000)
91
92/* physical offset addresses for the peripherals */
93
94#define VR1000_PA_IDEPRI (0x02000000)
95#define VR1000_PA_IDEPRIAUX (0x02800000)
96#define VR1000_PA_IDESEC (0x03000000)
97#define VR1000_PA_IDESECAUX (0x03800000)
98#define VR1000_PA_DM9000 (0x05000000)
99
100#define VR1000_PA_SERIAL (0x11800000)
101#define VR1000_VA_SERIAL (VR1000_IOADDR(0x00700000))
102
103/* VR1000 ram is in CS1, with A26..A24 = 2_101 */
104#define VR1000_PA_SRAM (S3C2410_CS1 | 0x05000000)
105
106/* some configurations for the peripherals */
107
108#define VR1000_DM9000_CS VR1000_VAM_CS4
109
110#endif /* __ASM_ARCH_VR1000MAP_H */
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-24 13:12:17 -0500