aboutsummaryrefslogtreecommitdiffstats
path: root/include/asm-arm/arch-s3c2410/entry-macro.S
diff options
context:
space:
mode:
Diffstat (limited to 'include/asm-arm/arch-s3c2410/entry-macro.S')
-rw-r--r--include/asm-arm/arch-s3c2410/entry-macro.S167
1 files changed, 67 insertions, 100 deletions
diff --git a/include/asm-arm/arch-s3c2410/entry-macro.S b/include/asm-arm/arch-s3c2410/entry-macro.S
index cc06b1bd37b2..894c35cf3b1e 100644
--- a/include/asm-arm/arch-s3c2410/entry-macro.S
+++ b/include/asm-arm/arch-s3c2410/entry-macro.S
@@ -6,116 +6,83 @@
6 * This file is licensed under the terms of the GNU General Public 6 * This file is licensed under the terms of the GNU General Public
7 * License version 2. This program is licensed "as is" without any 7 * License version 2. This program is licensed "as is" without any
8 * warranty of any kind, whether express or implied. 8 * warranty of any kind, whether express or implied.
9*/
10
11/* We have a problem that the INTOFFSET register does not always
12 * show one interrupt. Occasionally we get two interrupts through
13 * the prioritiser, and this causes the INTOFFSET register to show
14 * what looks like the logical-or of the two interrupt numbers.
15 *
16 * Thanks to Klaus, Shannon, et al for helping to debug this problem
17*/
18
19#define INTPND (0x10)
20#define INTOFFSET (0x14)
21#define EXTINTPEND (0xa8)
22#define EXTINTMASK (0xa4)
9 23
10 * Modifications:
11 * 10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA
12 */
13#include <asm/hardware.h> 24#include <asm/hardware.h>
14#include <asm/arch/irqs.h> 25#include <asm/arch/irqs.h>
15 26
16
17 .macro get_irqnr_and_base, irqnr, irqstat, base, tmp 27 .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
18 28
19 mov \tmp, #S3C24XX_VA_IRQ 29 mov \base, #S3C24XX_VA_IRQ
20 ldr \irqnr, [ \tmp, #0x14 ] @ get irq no 30
2130000: 31 ldr \irqstat, [ \base, #INTPND]
22 teq \irqnr, #4 32 bics \irqnr, \irqstat, #3<<4 @@ only an GPIO IRQ
23 teqne \irqnr, #5 33 beq 2000f
24 beq 1002f @ external irq reg 34
25 35 @@ try the interrupt offset register, since it is there
26 @ debug check to see if interrupt reported is the same 36
27 @ as the offset.... 37 ldr \irqnr, [ \base, #INTOFFSET ]
28 38 mov \tmp, #1
29 teq \irqnr, #0 39 tst \irqstat, \tmp, lsl \irqnr
30 beq 20002f 40 addne \irqnr, \irqnr, #IRQ_EINT0
31 ldr \irqstat, [ \tmp, #0x10 ] @ INTPND 41 bne 1001f
32 mov \irqstat, \irqstat, lsr \irqnr 42
33 tst \irqstat, #1 43 @@ the number specified is not a valid irq, so try
34 bne 20002f 44 @@ and work it out for ourselves
35 45
36 /* debug/warning if we get an invalud response from the 46 mov \irqnr, #IRQ_EINT0 @@ start here
37 * INTOFFSET register */ 47 b 3000f
38#if 1 48
39 stmfd r13!, { r0 - r4 , r8-r12, r14 } 492000:
40 ldr r1, [ \tmp, #0x14 ] @ INTOFFSET 50 @@ load the GPIO interrupt register, and check it
41 ldr r2, [ \tmp, #0x10 ] @ INTPND 51
42 ldr r3, [ \tmp, #0x00 ] @ SRCPND 52 add \tmp, \base, #S3C24XX_VA_GPIO - S3C24XX_VA_IRQ
43 adr r0, 20003f 53 ldr \irqstat, [ \tmp, # EXTINTPEND ]
44 bl printk 54 ldr \irqnr, [ \tmp, # EXTINTMASK ]
45 b 20004f 55 bics \irqstat, \irqstat, \irqnr
46 56 beq 1001f
4720003: 57
48 .ascii "<7>irq: err - bad offset %d, intpnd=%08x, srcpnd=%08x\n" 58 mov \irqnr, #(IRQ_EINT4 - 4)
49 .byte 0 59
50 .align 4 60 @@ work out which irq (if any) we got
5120004: 613000:
52 mov r1, #1 62 movs \tmp, \irqstat, lsl#16
53 mov \tmp, #S3C24XX_VA_IRQ 63 addeq \irqnr, \irqnr, #16
54 ldmfd r13!, { r0 - r4 , r8-r12, r14 } 64 moveq \irqstat, \irqstat, lsr#16
55#endif 65 tst \irqstat, #0xff
56 66 addeq \irqnr, \irqnr, #8
57 @ try working out interrupt number for ourselves 67 moveq \irqstat, \irqstat, lsr#8
58 mov \irqnr, #0 68 tst \irqstat, #0xf
59 ldr \irqstat, [ \tmp, #0x10 ] @ INTPND 69 addeq \irqnr, \irqnr, #4
6010021: 70 moveq \irqstat, \irqstat, lsr#4
61 movs \irqstat, \irqstat, lsr#1 71 tst \irqstat, #0x3
62 bcs 30000b @ try and re-start the proccess 72 addeq \irqnr, \irqnr, #2
63 add \irqnr, \irqnr, #1 73 moveq \irqstat, \irqstat, lsr#2
64 cmp \irqnr, #32 74 tst \irqstat, #0x1
65 ble 10021b 75 addeq \irqnr, \irqnr, #1
66 76
67 @ found no interrupt, set Z flag and leave 77 @@ we have the value
68 movs \irqnr, #0 78 movs \irqnr, \irqnr
69 b 1001f 79
70
7120005:
7220002: @ exit
73 @ we base the s3c2410x interrupts at 16 and above to allow
74 @ isa peripherals to have their standard interrupts, also
75 @ ensure that Z flag is un-set on exit
76
77 @ note, we cannot be sure if we get IRQ_EINT0 (0) that
78 @ there is simply no interrupt pending, so in all other
79 @ cases we jump to say we have found something, otherwise
80 @ we check to see if the interrupt really is assrted
81 adds \irqnr, \irqnr, #IRQ_EINT0
82 teq \irqnr, #IRQ_EINT0
83 bne 1001f @ exit
84 ldr \irqstat, [ \tmp, #0x10 ] @ INTPND
85 teq \irqstat, #0
86 moveq \irqnr, #0
87 b 1001f
88
89 @ we get here from no main or external interrupts pending
901002:
91 add \tmp, \tmp, #S3C24XX_VA_GPIO - S3C24XX_VA_IRQ
92 ldr \irqstat, [ \tmp, # 0xa8 ] @ EXTINTPEND
93 ldr \irqnr, [ \tmp, # 0xa4 ] @ EXTINTMASK
94
95 bic \irqstat, \irqstat, \irqnr @ clear masked irqs
96
97 mov \irqnr, #IRQ_EINT4 @ start extint nos
98 mov \irqstat, \irqstat, lsr#4 @ ignore bottom 4 bits
9910021:
100 movs \irqstat, \irqstat, lsr#1
101 bcs 1004f
102 add \irqnr, \irqnr, #1
103 cmp \irqnr, #IRQ_EINT23
104 ble 10021b
105
106 @ found no interrupt, set Z flag and leave
107 movs \irqnr, #0
108
1091004: @ ensure Z flag clear in case our MOVS shifted out the last bit
110 teq \irqnr, #0
1111001: 801001:
112 @ exit irq routine 81 @@ exit here, Z flag unset if IRQ
113 .endm
114 82
83 .endm
115 84
116 /* currently don't need an disable_fiq macro */ 85 /* currently don't need an disable_fiq macro */
117 86
118 .macro disable_fiq 87 .macro disable_fiq
119 .endm 88 .endm
120
121
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-22 00:22:06 -0500