diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/mmc/host/Kconfig | 36 | ||||
-rw-r--r-- | drivers/mmc/host/Makefile | 2 | ||||
-rw-r--r-- | drivers/mmc/host/s3cmci.c | 2 | ||||
-rw-r--r-- | drivers/mmc/host/sdhci-of.c | 3 | ||||
-rw-r--r-- | drivers/mmc/host/sdhci-pci.c | 20 | ||||
-rw-r--r-- | drivers/mmc/host/sdhci-s3c.c | 428 | ||||
-rw-r--r-- | drivers/mmc/host/sdhci.c | 52 | ||||
-rw-r--r-- | drivers/mmc/host/sdhci.h | 6 | ||||
-rw-r--r-- | drivers/mmc/host/via-sdmmc.c | 1362 |
9 files changed, 1905 insertions, 6 deletions
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index 40111a6d8d5b..891ef18bd77b 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig | |||
@@ -94,6 +94,31 @@ config MMC_SDHCI_PLTFM | |||
94 | 94 | ||
95 | If unsure, say N. | 95 | If unsure, say N. |
96 | 96 | ||
97 | config MMC_SDHCI_S3C | ||
98 | tristate "SDHCI support on Samsung S3C SoC" | ||
99 | depends on MMC_SDHCI && (PLAT_S3C24XX || PLAT_S3C64XX) | ||
100 | help | ||
101 | This selects the Secure Digital Host Controller Interface (SDHCI) | ||
102 | often referrered to as the HSMMC block in some of the Samsung S3C | ||
103 | range of SoC. | ||
104 | |||
105 | Note, due to the problems with DMA, the DMA support is only | ||
106 | available with CONFIG_EXPERIMENTAL is selected. | ||
107 | |||
108 | If you have a controller with this interface, say Y or M here. | ||
109 | |||
110 | If unsure, say N. | ||
111 | |||
112 | config MMC_SDHCI_S3C_DMA | ||
113 | bool "DMA support on S3C SDHCI" | ||
114 | depends on MMC_SDHCI_S3C && EXPERIMENTAL | ||
115 | help | ||
116 | Enable DMA support on the Samsung S3C SDHCI glue. The DMA | ||
117 | has proved to be problematic if the controller encounters | ||
118 | certain errors, and thus should be treated with care. | ||
119 | |||
120 | YMMV. | ||
121 | |||
97 | config MMC_OMAP | 122 | config MMC_OMAP |
98 | tristate "TI OMAP Multimedia Card Interface support" | 123 | tristate "TI OMAP Multimedia Card Interface support" |
99 | depends on ARCH_OMAP | 124 | depends on ARCH_OMAP |
@@ -265,3 +290,14 @@ config MMC_CB710 | |||
265 | This driver can also be built as a module. If so, the module | 290 | This driver can also be built as a module. If so, the module |
266 | will be called cb710-mmc. | 291 | will be called cb710-mmc. |
267 | 292 | ||
293 | config MMC_VIA_SDMMC | ||
294 | tristate "VIA SD/MMC Card Reader Driver" | ||
295 | depends on PCI | ||
296 | help | ||
297 | This selects the VIA SD/MMC Card Reader driver, say Y or M here. | ||
298 | VIA provides one multi-functional card reader which integrated into | ||
299 | some motherboards manufactured by VIA. This card reader supports | ||
300 | SD/MMC/SDHC. | ||
301 | If you have a controller with this interface, say Y or M here. | ||
302 | |||
303 | If unsure, say N. | ||
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile index 79da397c5fea..cf153f628457 100644 --- a/drivers/mmc/host/Makefile +++ b/drivers/mmc/host/Makefile | |||
@@ -15,6 +15,7 @@ obj-$(CONFIG_MMC_SDHCI_PCI) += sdhci-pci.o | |||
15 | obj-$(CONFIG_MMC_RICOH_MMC) += ricoh_mmc.o | 15 | obj-$(CONFIG_MMC_RICOH_MMC) += ricoh_mmc.o |
16 | obj-$(CONFIG_MMC_SDHCI_OF) += sdhci-of.o | 16 | obj-$(CONFIG_MMC_SDHCI_OF) += sdhci-of.o |
17 | obj-$(CONFIG_MMC_SDHCI_PLTFM) += sdhci-pltfm.o | 17 | obj-$(CONFIG_MMC_SDHCI_PLTFM) += sdhci-pltfm.o |
18 | obj-$(CONFIG_MMC_SDHCI_S3C) += sdhci-s3c.o | ||
18 | obj-$(CONFIG_MMC_WBSD) += wbsd.o | 19 | obj-$(CONFIG_MMC_WBSD) += wbsd.o |
19 | obj-$(CONFIG_MMC_AU1X) += au1xmmc.o | 20 | obj-$(CONFIG_MMC_AU1X) += au1xmmc.o |
20 | obj-$(CONFIG_MMC_OMAP) += omap.o | 21 | obj-$(CONFIG_MMC_OMAP) += omap.o |
@@ -31,6 +32,7 @@ obj-$(CONFIG_MMC_S3C) += s3cmci.o | |||
31 | obj-$(CONFIG_MMC_SDRICOH_CS) += sdricoh_cs.o | 32 | obj-$(CONFIG_MMC_SDRICOH_CS) += sdricoh_cs.o |
32 | obj-$(CONFIG_MMC_TMIO) += tmio_mmc.o | 33 | obj-$(CONFIG_MMC_TMIO) += tmio_mmc.o |
33 | obj-$(CONFIG_MMC_CB710) += cb710-mmc.o | 34 | obj-$(CONFIG_MMC_CB710) += cb710-mmc.o |
35 | obj-$(CONFIG_MMC_VIA_SDMMC) += via-sdmmc.o | ||
34 | 36 | ||
35 | ifeq ($(CONFIG_CB710_DEBUG),y) | 37 | ifeq ($(CONFIG_CB710_DEBUG),y) |
36 | CFLAGS-cb710-mmc += -DDEBUG | 38 | CFLAGS-cb710-mmc += -DDEBUG |
diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c index 4eb4f37544ab..8c08cd7efa7f 100644 --- a/drivers/mmc/host/s3cmci.c +++ b/drivers/mmc/host/s3cmci.c | |||
@@ -794,7 +794,7 @@ static void s3cmci_dma_setup(struct s3cmci_host *host, | |||
794 | host->mem->start + host->sdidata); | 794 | host->mem->start + host->sdidata); |
795 | 795 | ||
796 | if (!setup_ok) { | 796 | if (!setup_ok) { |
797 | s3c2410_dma_config(host->dma, 4, 0); | 797 | s3c2410_dma_config(host->dma, 4); |
798 | s3c2410_dma_set_buffdone_fn(host->dma, | 798 | s3c2410_dma_set_buffdone_fn(host->dma, |
799 | s3cmci_dma_done_callback); | 799 | s3cmci_dma_done_callback); |
800 | s3c2410_dma_setflags(host->dma, S3C2410_DMAF_AUTOSTART); | 800 | s3c2410_dma_setflags(host->dma, S3C2410_DMAF_AUTOSTART); |
diff --git a/drivers/mmc/host/sdhci-of.c b/drivers/mmc/host/sdhci-of.c index 128c614d11aa..d79fa55c3b89 100644 --- a/drivers/mmc/host/sdhci-of.c +++ b/drivers/mmc/host/sdhci-of.c | |||
@@ -250,6 +250,9 @@ static int __devinit sdhci_of_probe(struct of_device *ofdev, | |||
250 | host->ops = &sdhci_of_data->ops; | 250 | host->ops = &sdhci_of_data->ops; |
251 | } | 251 | } |
252 | 252 | ||
253 | if (of_get_property(np, "sdhci,1-bit-only", NULL)) | ||
254 | host->quirks |= SDHCI_QUIRK_FORCE_1_BIT_DATA; | ||
255 | |||
253 | clk = of_get_property(np, "clock-frequency", &size); | 256 | clk = of_get_property(np, "clock-frequency", &size); |
254 | if (clk && size == sizeof(*clk) && *clk) | 257 | if (clk && size == sizeof(*clk) && *clk) |
255 | of_host->clock = *clk; | 258 | of_host->clock = *clk; |
diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c index 65be27995d5c..2f15cc17d887 100644 --- a/drivers/mmc/host/sdhci-pci.c +++ b/drivers/mmc/host/sdhci-pci.c | |||
@@ -284,6 +284,18 @@ static const struct sdhci_pci_fixes sdhci_jmicron = { | |||
284 | .resume = jmicron_resume, | 284 | .resume = jmicron_resume, |
285 | }; | 285 | }; |
286 | 286 | ||
287 | static int via_probe(struct sdhci_pci_chip *chip) | ||
288 | { | ||
289 | if (chip->pdev->revision == 0x10) | ||
290 | chip->quirks |= SDHCI_QUIRK_DELAY_AFTER_POWER; | ||
291 | |||
292 | return 0; | ||
293 | } | ||
294 | |||
295 | static const struct sdhci_pci_fixes sdhci_via = { | ||
296 | .probe = via_probe, | ||
297 | }; | ||
298 | |||
287 | static const struct pci_device_id pci_ids[] __devinitdata = { | 299 | static const struct pci_device_id pci_ids[] __devinitdata = { |
288 | { | 300 | { |
289 | .vendor = PCI_VENDOR_ID_RICOH, | 301 | .vendor = PCI_VENDOR_ID_RICOH, |
@@ -349,6 +361,14 @@ static const struct pci_device_id pci_ids[] __devinitdata = { | |||
349 | .driver_data = (kernel_ulong_t)&sdhci_jmicron, | 361 | .driver_data = (kernel_ulong_t)&sdhci_jmicron, |
350 | }, | 362 | }, |
351 | 363 | ||
364 | { | ||
365 | .vendor = PCI_VENDOR_ID_VIA, | ||
366 | .device = 0x95d0, | ||
367 | .subvendor = PCI_ANY_ID, | ||
368 | .subdevice = PCI_ANY_ID, | ||
369 | .driver_data = (kernel_ulong_t)&sdhci_via, | ||
370 | }, | ||
371 | |||
352 | { /* Generic SD host controller */ | 372 | { /* Generic SD host controller */ |
353 | PCI_DEVICE_CLASS((PCI_CLASS_SYSTEM_SDHCI << 8), 0xFFFF00) | 373 | PCI_DEVICE_CLASS((PCI_CLASS_SYSTEM_SDHCI << 8), 0xFFFF00) |
354 | }, | 374 | }, |
diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c new file mode 100644 index 000000000000..50997d2a63e7 --- /dev/null +++ b/drivers/mmc/host/sdhci-s3c.c | |||
@@ -0,0 +1,428 @@ | |||
1 | /* linux/drivers/mmc/host/sdhci-s3c.c | ||
2 | * | ||
3 | * Copyright 2008 Openmoko Inc. | ||
4 | * Copyright 2008 Simtec Electronics | ||
5 | * Ben Dooks <ben@simtec.co.uk> | ||
6 | * http://armlinux.simtec.co.uk/ | ||
7 | * | ||
8 | * SDHCI (HSMMC) support for Samsung SoC | ||
9 | * | ||
10 | * This program is free software; you can redistribute it and/or modify | ||
11 | * it under the terms of the GNU General Public License version 2 as | ||
12 | * published by the Free Software Foundation. | ||
13 | */ | ||
14 | |||
15 | #include <linux/delay.h> | ||
16 | #include <linux/dma-mapping.h> | ||
17 | #include <linux/platform_device.h> | ||
18 | #include <linux/clk.h> | ||
19 | #include <linux/io.h> | ||
20 | |||
21 | #include <linux/mmc/host.h> | ||
22 | |||
23 | #include <plat/sdhci.h> | ||
24 | #include <plat/regs-sdhci.h> | ||
25 | |||
26 | #include "sdhci.h" | ||
27 | |||
28 | #define MAX_BUS_CLK (4) | ||
29 | |||
30 | /** | ||
31 | * struct sdhci_s3c - S3C SDHCI instance | ||
32 | * @host: The SDHCI host created | ||
33 | * @pdev: The platform device we where created from. | ||
34 | * @ioarea: The resource created when we claimed the IO area. | ||
35 | * @pdata: The platform data for this controller. | ||
36 | * @cur_clk: The index of the current bus clock. | ||
37 | * @clk_io: The clock for the internal bus interface. | ||
38 | * @clk_bus: The clocks that are available for the SD/MMC bus clock. | ||
39 | */ | ||
40 | struct sdhci_s3c { | ||
41 | struct sdhci_host *host; | ||
42 | struct platform_device *pdev; | ||
43 | struct resource *ioarea; | ||
44 | struct s3c_sdhci_platdata *pdata; | ||
45 | unsigned int cur_clk; | ||
46 | |||
47 | struct clk *clk_io; | ||
48 | struct clk *clk_bus[MAX_BUS_CLK]; | ||
49 | }; | ||
50 | |||
51 | static inline struct sdhci_s3c *to_s3c(struct sdhci_host *host) | ||
52 | { | ||
53 | return sdhci_priv(host); | ||
54 | } | ||
55 | |||
56 | /** | ||
57 | * get_curclk - convert ctrl2 register to clock source number | ||
58 | * @ctrl2: Control2 register value. | ||
59 | */ | ||
60 | static u32 get_curclk(u32 ctrl2) | ||
61 | { | ||
62 | ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK; | ||
63 | ctrl2 >>= S3C_SDHCI_CTRL2_SELBASECLK_SHIFT; | ||
64 | |||
65 | return ctrl2; | ||
66 | } | ||
67 | |||
68 | static void sdhci_s3c_check_sclk(struct sdhci_host *host) | ||
69 | { | ||
70 | struct sdhci_s3c *ourhost = to_s3c(host); | ||
71 | u32 tmp = readl(host->ioaddr + S3C_SDHCI_CONTROL2); | ||
72 | |||
73 | if (get_curclk(tmp) != ourhost->cur_clk) { | ||
74 | dev_dbg(&ourhost->pdev->dev, "restored ctrl2 clock setting\n"); | ||
75 | |||
76 | tmp &= ~S3C_SDHCI_CTRL2_SELBASECLK_MASK; | ||
77 | tmp |= ourhost->cur_clk << S3C_SDHCI_CTRL2_SELBASECLK_SHIFT; | ||
78 | writel(tmp, host->ioaddr + 0x80); | ||
79 | } | ||
80 | } | ||
81 | |||
82 | /** | ||
83 | * sdhci_s3c_get_max_clk - callback to get maximum clock frequency. | ||
84 | * @host: The SDHCI host instance. | ||
85 | * | ||
86 | * Callback to return the maximum clock rate acheivable by the controller. | ||
87 | */ | ||
88 | static unsigned int sdhci_s3c_get_max_clk(struct sdhci_host *host) | ||
89 | { | ||
90 | struct sdhci_s3c *ourhost = to_s3c(host); | ||
91 | struct clk *busclk; | ||
92 | unsigned int rate, max; | ||
93 | int clk; | ||
94 | |||
95 | /* note, a reset will reset the clock source */ | ||
96 | |||
97 | sdhci_s3c_check_sclk(host); | ||
98 | |||
99 | for (max = 0, clk = 0; clk < MAX_BUS_CLK; clk++) { | ||
100 | busclk = ourhost->clk_bus[clk]; | ||
101 | if (!busclk) | ||
102 | continue; | ||
103 | |||
104 | rate = clk_get_rate(busclk); | ||
105 | if (rate > max) | ||
106 | max = rate; | ||
107 | } | ||
108 | |||
109 | return max; | ||
110 | } | ||
111 | |||
112 | static unsigned int sdhci_s3c_get_timeout_clk(struct sdhci_host *host) | ||
113 | { | ||
114 | return sdhci_s3c_get_max_clk(host) / 1000000; | ||
115 | } | ||
116 | |||
117 | /** | ||
118 | * sdhci_s3c_consider_clock - consider one the bus clocks for current setting | ||
119 | * @ourhost: Our SDHCI instance. | ||
120 | * @src: The source clock index. | ||
121 | * @wanted: The clock frequency wanted. | ||
122 | */ | ||
123 | static unsigned int sdhci_s3c_consider_clock(struct sdhci_s3c *ourhost, | ||
124 | unsigned int src, | ||
125 | unsigned int wanted) | ||
126 | { | ||
127 | unsigned long rate; | ||
128 | struct clk *clksrc = ourhost->clk_bus[src]; | ||
129 | int div; | ||
130 | |||
131 | if (!clksrc) | ||
132 | return UINT_MAX; | ||
133 | |||
134 | rate = clk_get_rate(clksrc); | ||
135 | |||
136 | for (div = 1; div < 256; div *= 2) { | ||
137 | if ((rate / div) <= wanted) | ||
138 | break; | ||
139 | } | ||
140 | |||
141 | dev_dbg(&ourhost->pdev->dev, "clk %d: rate %ld, want %d, got %ld\n", | ||
142 | src, rate, wanted, rate / div); | ||
143 | |||
144 | return (wanted - (rate / div)); | ||
145 | } | ||
146 | |||
147 | /** | ||
148 | * sdhci_s3c_set_clock - callback on clock change | ||
149 | * @host: The SDHCI host being changed | ||
150 | * @clock: The clock rate being requested. | ||
151 | * | ||
152 | * When the card's clock is going to be changed, look at the new frequency | ||
153 | * and find the best clock source to go with it. | ||
154 | */ | ||
155 | static void sdhci_s3c_set_clock(struct sdhci_host *host, unsigned int clock) | ||
156 | { | ||
157 | struct sdhci_s3c *ourhost = to_s3c(host); | ||
158 | unsigned int best = UINT_MAX; | ||
159 | unsigned int delta; | ||
160 | int best_src = 0; | ||
161 | int src; | ||
162 | u32 ctrl; | ||
163 | |||
164 | /* don't bother if the clock is going off. */ | ||
165 | if (clock == 0) | ||
166 | return; | ||
167 | |||
168 | for (src = 0; src < MAX_BUS_CLK; src++) { | ||
169 | delta = sdhci_s3c_consider_clock(ourhost, src, clock); | ||
170 | if (delta < best) { | ||
171 | best = delta; | ||
172 | best_src = src; | ||
173 | } | ||
174 | } | ||
175 | |||
176 | dev_dbg(&ourhost->pdev->dev, | ||
177 | "selected source %d, clock %d, delta %d\n", | ||
178 | best_src, clock, best); | ||
179 | |||
180 | /* select the new clock source */ | ||
181 | |||
182 | if (ourhost->cur_clk != best_src) { | ||
183 | struct clk *clk = ourhost->clk_bus[best_src]; | ||
184 | |||
185 | /* turn clock off to card before changing clock source */ | ||
186 | writew(0, host->ioaddr + SDHCI_CLOCK_CONTROL); | ||
187 | |||
188 | ourhost->cur_clk = best_src; | ||
189 | host->max_clk = clk_get_rate(clk); | ||
190 | host->timeout_clk = sdhci_s3c_get_timeout_clk(host); | ||
191 | |||
192 | ctrl = readl(host->ioaddr + S3C_SDHCI_CONTROL2); | ||
193 | ctrl &= ~S3C_SDHCI_CTRL2_SELBASECLK_MASK; | ||
194 | ctrl |= best_src << S3C_SDHCI_CTRL2_SELBASECLK_SHIFT; | ||
195 | writel(ctrl, host->ioaddr + S3C_SDHCI_CONTROL2); | ||
196 | } | ||
197 | |||
198 | /* reconfigure the hardware for new clock rate */ | ||
199 | |||
200 | { | ||
201 | struct mmc_ios ios; | ||
202 | |||
203 | ios.clock = clock; | ||
204 | |||
205 | if (ourhost->pdata->cfg_card) | ||
206 | (ourhost->pdata->cfg_card)(ourhost->pdev, host->ioaddr, | ||
207 | &ios, NULL); | ||
208 | } | ||
209 | } | ||
210 | |||
211 | static struct sdhci_ops sdhci_s3c_ops = { | ||
212 | .get_max_clock = sdhci_s3c_get_max_clk, | ||
213 | .get_timeout_clock = sdhci_s3c_get_timeout_clk, | ||
214 | .set_clock = sdhci_s3c_set_clock, | ||
215 | }; | ||
216 | |||
217 | static int __devinit sdhci_s3c_probe(struct platform_device *pdev) | ||
218 | { | ||
219 | struct s3c_sdhci_platdata *pdata = pdev->dev.platform_data; | ||
220 | struct device *dev = &pdev->dev; | ||
221 | struct sdhci_host *host; | ||
222 | struct sdhci_s3c *sc; | ||
223 | struct resource *res; | ||
224 | int ret, irq, ptr, clks; | ||
225 | |||
226 | if (!pdata) { | ||
227 | dev_err(dev, "no device data specified\n"); | ||
228 | return -ENOENT; | ||
229 | } | ||
230 | |||
231 | irq = platform_get_irq(pdev, 0); | ||
232 | if (irq < 0) { | ||
233 | dev_err(dev, "no irq specified\n"); | ||
234 | return irq; | ||
235 | } | ||
236 | |||
237 | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | ||
238 | if (!res) { | ||
239 | dev_err(dev, "no memory specified\n"); | ||
240 | return -ENOENT; | ||
241 | } | ||
242 | |||
243 | host = sdhci_alloc_host(dev, sizeof(struct sdhci_s3c)); | ||
244 | if (IS_ERR(host)) { | ||
245 | dev_err(dev, "sdhci_alloc_host() failed\n"); | ||
246 | return PTR_ERR(host); | ||
247 | } | ||
248 | |||
249 | sc = sdhci_priv(host); | ||
250 | |||
251 | sc->host = host; | ||
252 | sc->pdev = pdev; | ||
253 | sc->pdata = pdata; | ||
254 | |||
255 | platform_set_drvdata(pdev, host); | ||
256 | |||
257 | sc->clk_io = clk_get(dev, "hsmmc"); | ||
258 | if (IS_ERR(sc->clk_io)) { | ||
259 | dev_err(dev, "failed to get io clock\n"); | ||
260 | ret = PTR_ERR(sc->clk_io); | ||
261 | goto err_io_clk; | ||
262 | } | ||
263 | |||
264 | /* enable the local io clock and keep it running for the moment. */ | ||
265 | clk_enable(sc->clk_io); | ||
266 | |||
267 | for (clks = 0, ptr = 0; ptr < MAX_BUS_CLK; ptr++) { | ||
268 | struct clk *clk; | ||
269 | char *name = pdata->clocks[ptr]; | ||
270 | |||
271 | if (name == NULL) | ||
272 | continue; | ||
273 | |||
274 | clk = clk_get(dev, name); | ||
275 | if (IS_ERR(clk)) { | ||
276 | dev_err(dev, "failed to get clock %s\n", name); | ||
277 | continue; | ||
278 | } | ||
279 | |||
280 | clks++; | ||
281 | sc->clk_bus[ptr] = clk; | ||
282 | clk_enable(clk); | ||
283 | |||
284 | dev_info(dev, "clock source %d: %s (%ld Hz)\n", | ||
285 | ptr, name, clk_get_rate(clk)); | ||
286 | } | ||
287 | |||
288 | if (clks == 0) { | ||
289 | dev_err(dev, "failed to find any bus clocks\n"); | ||
290 | ret = -ENOENT; | ||
291 | goto err_no_busclks; | ||
292 | } | ||
293 | |||
294 | sc->ioarea = request_mem_region(res->start, resource_size(res), | ||
295 | mmc_hostname(host->mmc)); | ||
296 | if (!sc->ioarea) { | ||
297 | dev_err(dev, "failed to reserve register area\n"); | ||
298 | ret = -ENXIO; | ||
299 | goto err_req_regs; | ||
300 | } | ||
301 | |||
302 | host->ioaddr = ioremap_nocache(res->start, resource_size(res)); | ||
303 | if (!host->ioaddr) { | ||
304 | dev_err(dev, "failed to map registers\n"); | ||
305 | ret = -ENXIO; | ||
306 | goto err_req_regs; | ||
307 | } | ||
308 | |||
309 | /* Ensure we have minimal gpio selected CMD/CLK/Detect */ | ||
310 | if (pdata->cfg_gpio) | ||
311 | pdata->cfg_gpio(pdev, pdata->max_width); | ||
312 | |||
313 | host->hw_name = "samsung-hsmmc"; | ||
314 | host->ops = &sdhci_s3c_ops; | ||
315 | host->quirks = 0; | ||
316 | host->irq = irq; | ||
317 | |||
318 | /* Setup quirks for the controller */ | ||
319 | |||
320 | /* Currently with ADMA enabled we are getting some length | ||
321 | * interrupts that are not being dealt with, do disable | ||
322 | * ADMA until this is sorted out. */ | ||
323 | host->quirks |= SDHCI_QUIRK_BROKEN_ADMA; | ||
324 | host->quirks |= SDHCI_QUIRK_32BIT_ADMA_SIZE; | ||
325 | |||
326 | #ifndef CONFIG_MMC_SDHCI_S3C_DMA | ||
327 | |||
328 | /* we currently see overruns on errors, so disable the SDMA | ||
329 | * support as well. */ | ||
330 | host->quirks |= SDHCI_QUIRK_BROKEN_DMA; | ||
331 | |||
332 | /* PIO currently has problems with multi-block IO */ | ||
333 | host->quirks |= SDHCI_QUIRK_NO_MULTIBLOCK; | ||
334 | |||
335 | #endif /* CONFIG_MMC_SDHCI_S3C_DMA */ | ||
336 | |||
337 | /* It seems we do not get an DATA transfer complete on non-busy | ||
338 | * transfers, not sure if this is a problem with this specific | ||
339 | * SDHCI block, or a missing configuration that needs to be set. */ | ||
340 | host->quirks |= SDHCI_QUIRK_NO_BUSY_IRQ; | ||
341 | |||
342 | host->quirks |= (SDHCI_QUIRK_32BIT_DMA_ADDR | | ||
343 | SDHCI_QUIRK_32BIT_DMA_SIZE); | ||
344 | |||
345 | ret = sdhci_add_host(host); | ||
346 | if (ret) { | ||
347 | dev_err(dev, "sdhci_add_host() failed\n"); | ||
348 | goto err_add_host; | ||
349 | } | ||
350 | |||
351 | return 0; | ||
352 | |||
353 | err_add_host: | ||
354 | release_resource(sc->ioarea); | ||
355 | kfree(sc->ioarea); | ||
356 | |||
357 | err_req_regs: | ||
358 | for (ptr = 0; ptr < MAX_BUS_CLK; ptr++) { | ||
359 | clk_disable(sc->clk_bus[ptr]); | ||
360 | clk_put(sc->clk_bus[ptr]); | ||
361 | } | ||
362 | |||
363 | err_no_busclks: | ||
364 | clk_disable(sc->clk_io); | ||
365 | clk_put(sc->clk_io); | ||
366 | |||
367 | err_io_clk: | ||
368 | sdhci_free_host(host); | ||
369 | |||
370 | return ret; | ||
371 | } | ||
372 | |||
373 | static int __devexit sdhci_s3c_remove(struct platform_device *pdev) | ||
374 | { | ||
375 | return 0; | ||
376 | } | ||
377 | |||
378 | #ifdef CONFIG_PM | ||
379 | |||
380 | static int sdhci_s3c_suspend(struct platform_device *dev, pm_message_t pm) | ||
381 | { | ||
382 | struct sdhci_host *host = platform_get_drvdata(dev); | ||
383 | |||
384 | sdhci_suspend_host(host, pm); | ||
385 | return 0; | ||
386 | } | ||
387 | |||
388 | static int sdhci_s3c_resume(struct platform_device *dev) | ||
389 | { | ||
390 | struct sdhci_host *host = platform_get_drvdata(dev); | ||
391 | |||
392 | sdhci_resume_host(host); | ||
393 | return 0; | ||
394 | } | ||
395 | |||
396 | #else | ||
397 | #define sdhci_s3c_suspend NULL | ||
398 | #define sdhci_s3c_resume NULL | ||
399 | #endif | ||
400 | |||
401 | static struct platform_driver sdhci_s3c_driver = { | ||
402 | .probe = sdhci_s3c_probe, | ||
403 | .remove = __devexit_p(sdhci_s3c_remove), | ||
404 | .suspend = sdhci_s3c_suspend, | ||
405 | .resume = sdhci_s3c_resume, | ||
406 | .driver = { | ||
407 | .owner = THIS_MODULE, | ||
408 | .name = "s3c-sdhci", | ||
409 | }, | ||
410 | }; | ||
411 | |||
412 | static int __init sdhci_s3c_init(void) | ||
413 | { | ||
414 | return platform_driver_register(&sdhci_s3c_driver); | ||
415 | } | ||
416 | |||
417 | static void __exit sdhci_s3c_exit(void) | ||
418 | { | ||
419 | platform_driver_unregister(&sdhci_s3c_driver); | ||
420 | } | ||
421 | |||
422 | module_init(sdhci_s3c_init); | ||
423 | module_exit(sdhci_s3c_exit); | ||
424 | |||
425 | MODULE_DESCRIPTION("Samsung SDHCI (HSMMC) glue"); | ||
426 | MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>"); | ||
427 | MODULE_LICENSE("GPL v2"); | ||
428 | MODULE_ALIAS("platform:s3c-sdhci"); | ||
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 35789c6edc19..6779b4ecab18 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c | |||
@@ -584,7 +584,7 @@ static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_data *data) | |||
584 | * longer to time out, but that's much better than having a too-short | 584 | * longer to time out, but that's much better than having a too-short |
585 | * timeout value. | 585 | * timeout value. |
586 | */ | 586 | */ |
587 | if ((host->quirks & SDHCI_QUIRK_BROKEN_TIMEOUT_VAL)) | 587 | if (host->quirks & SDHCI_QUIRK_BROKEN_TIMEOUT_VAL) |
588 | return 0xE; | 588 | return 0xE; |
589 | 589 | ||
590 | /* timeout in us */ | 590 | /* timeout in us */ |
@@ -1051,12 +1051,19 @@ static void sdhci_set_power(struct sdhci_host *host, unsigned short power) | |||
1051 | * At least the Marvell CaFe chip gets confused if we set the voltage | 1051 | * At least the Marvell CaFe chip gets confused if we set the voltage |
1052 | * and set turn on power at the same time, so set the voltage first. | 1052 | * and set turn on power at the same time, so set the voltage first. |
1053 | */ | 1053 | */ |
1054 | if ((host->quirks & SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER)) | 1054 | if (host->quirks & SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER) |
1055 | sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL); | 1055 | sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL); |
1056 | 1056 | ||
1057 | pwr |= SDHCI_POWER_ON; | 1057 | pwr |= SDHCI_POWER_ON; |
1058 | 1058 | ||
1059 | sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL); | 1059 | sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL); |
1060 | |||
1061 | /* | ||
1062 | * Some controllers need an extra 10ms delay of 10ms before they | ||
1063 | * can apply clock after applying power | ||
1064 | */ | ||
1065 | if (host->quirks & SDHCI_QUIRK_DELAY_AFTER_POWER) | ||
1066 | mdelay(10); | ||
1060 | } | 1067 | } |
1061 | 1068 | ||
1062 | /*****************************************************************************\ | 1069 | /*****************************************************************************\ |
@@ -1382,6 +1389,35 @@ static void sdhci_cmd_irq(struct sdhci_host *host, u32 intmask) | |||
1382 | sdhci_finish_command(host); | 1389 | sdhci_finish_command(host); |
1383 | } | 1390 | } |
1384 | 1391 | ||
1392 | #ifdef DEBUG | ||
1393 | static void sdhci_show_adma_error(struct sdhci_host *host) | ||
1394 | { | ||
1395 | const char *name = mmc_hostname(host->mmc); | ||
1396 | u8 *desc = host->adma_desc; | ||
1397 | __le32 *dma; | ||
1398 | __le16 *len; | ||
1399 | u8 attr; | ||
1400 | |||
1401 | sdhci_dumpregs(host); | ||
1402 | |||
1403 | while (true) { | ||
1404 | dma = (__le32 *)(desc + 4); | ||
1405 | len = (__le16 *)(desc + 2); | ||
1406 | attr = *desc; | ||
1407 | |||
1408 | DBG("%s: %p: DMA 0x%08x, LEN 0x%04x, Attr=0x%02x\n", | ||
1409 | name, desc, le32_to_cpu(*dma), le16_to_cpu(*len), attr); | ||
1410 | |||
1411 | desc += 8; | ||
1412 | |||
1413 | if (attr & 2) | ||
1414 | break; | ||
1415 | } | ||
1416 | } | ||
1417 | #else | ||
1418 | static void sdhci_show_adma_error(struct sdhci_host *host) { } | ||
1419 | #endif | ||
1420 | |||
1385 | static void sdhci_data_irq(struct sdhci_host *host, u32 intmask) | 1421 | static void sdhci_data_irq(struct sdhci_host *host, u32 intmask) |
1386 | { | 1422 | { |
1387 | BUG_ON(intmask == 0); | 1423 | BUG_ON(intmask == 0); |
@@ -1411,8 +1447,11 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask) | |||
1411 | host->data->error = -ETIMEDOUT; | 1447 | host->data->error = -ETIMEDOUT; |
1412 | else if (intmask & (SDHCI_INT_DATA_CRC | SDHCI_INT_DATA_END_BIT)) | 1448 | else if (intmask & (SDHCI_INT_DATA_CRC | SDHCI_INT_DATA_END_BIT)) |
1413 | host->data->error = -EILSEQ; | 1449 | host->data->error = -EILSEQ; |
1414 | else if (intmask & SDHCI_INT_ADMA_ERROR) | 1450 | else if (intmask & SDHCI_INT_ADMA_ERROR) { |
1451 | printk(KERN_ERR "%s: ADMA error\n", mmc_hostname(host->mmc)); | ||
1452 | sdhci_show_adma_error(host); | ||
1415 | host->data->error = -EIO; | 1453 | host->data->error = -EIO; |
1454 | } | ||
1416 | 1455 | ||
1417 | if (host->data->error) | 1456 | if (host->data->error) |
1418 | sdhci_finish_data(host); | 1457 | sdhci_finish_data(host); |
@@ -1729,7 +1768,10 @@ int sdhci_add_host(struct sdhci_host *host) | |||
1729 | mmc->ops = &sdhci_ops; | 1768 | mmc->ops = &sdhci_ops; |
1730 | mmc->f_min = host->max_clk / 256; | 1769 | mmc->f_min = host->max_clk / 256; |
1731 | mmc->f_max = host->max_clk; | 1770 | mmc->f_max = host->max_clk; |
1732 | mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ; | 1771 | mmc->caps = MMC_CAP_SDIO_IRQ; |
1772 | |||
1773 | if (!(host->quirks & SDHCI_QUIRK_FORCE_1_BIT_DATA)) | ||
1774 | mmc->caps |= MMC_CAP_4_BIT_DATA; | ||
1733 | 1775 | ||
1734 | if (caps & SDHCI_CAN_DO_HISPD) | 1776 | if (caps & SDHCI_CAN_DO_HISPD) |
1735 | mmc->caps |= MMC_CAP_SD_HIGHSPEED; | 1777 | mmc->caps |= MMC_CAP_SD_HIGHSPEED; |
@@ -1802,7 +1844,7 @@ int sdhci_add_host(struct sdhci_host *host) | |||
1802 | /* | 1844 | /* |
1803 | * Maximum block count. | 1845 | * Maximum block count. |
1804 | */ | 1846 | */ |
1805 | mmc->max_blk_count = 65535; | 1847 | mmc->max_blk_count = (host->quirks & SDHCI_QUIRK_NO_MULTIBLOCK) ? 1 : 65535; |
1806 | 1848 | ||
1807 | /* | 1849 | /* |
1808 | * Init tasklets. | 1850 | * Init tasklets. |
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index 2de08349c3ca..831ddf7dcb49 100644 --- a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h | |||
@@ -226,6 +226,12 @@ struct sdhci_host { | |||
226 | #define SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET (1<<19) | 226 | #define SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET (1<<19) |
227 | /* Controller has to be forced to use block size of 2048 bytes */ | 227 | /* Controller has to be forced to use block size of 2048 bytes */ |
228 | #define SDHCI_QUIRK_FORCE_BLK_SZ_2048 (1<<20) | 228 | #define SDHCI_QUIRK_FORCE_BLK_SZ_2048 (1<<20) |
229 | /* Controller cannot do multi-block transfers */ | ||
230 | #define SDHCI_QUIRK_NO_MULTIBLOCK (1<<21) | ||
231 | /* Controller can only handle 1-bit data transfers */ | ||
232 | #define SDHCI_QUIRK_FORCE_1_BIT_DATA (1<<22) | ||
233 | /* Controller needs 10ms delay between applying power and clock */ | ||
234 | #define SDHCI_QUIRK_DELAY_AFTER_POWER (1<<23) | ||
229 | 235 | ||
230 | int irq; /* Device IRQ */ | 236 | int irq; /* Device IRQ */ |
231 | void __iomem * ioaddr; /* Mapped address */ | 237 | void __iomem * ioaddr; /* Mapped address */ |
diff --git a/drivers/mmc/host/via-sdmmc.c b/drivers/mmc/host/via-sdmmc.c new file mode 100644 index 000000000000..632858a94376 --- /dev/null +++ b/drivers/mmc/host/via-sdmmc.c | |||
@@ -0,0 +1,1362 @@ | |||
1 | /* | ||
2 | * drivers/mmc/host/via-sdmmc.c - VIA SD/MMC Card Reader driver | ||
3 | * Copyright (c) 2008, VIA Technologies Inc. All Rights Reserved. | ||
4 | * | ||
5 | * This program is free software; you can redistribute it and/or modify | ||
6 | * it under the terms of the GNU General Public License as published by | ||
7 | * the Free Software Foundation; either version 2 of the License, or (at | ||
8 | * your option) any later version. | ||
9 | */ | ||
10 | |||
11 | #include <linux/pci.h> | ||
12 | #include <linux/dma-mapping.h> | ||
13 | #include <linux/highmem.h> | ||
14 | #include <linux/delay.h> | ||
15 | |||
16 | #include <linux/mmc/host.h> | ||
17 | |||
18 | #define DRV_NAME "via_sdmmc" | ||
19 | |||
20 | #define PCI_DEVICE_ID_VIA_9530 0x9530 | ||
21 | |||
22 | #define VIA_CRDR_SDC_OFF 0x200 | ||
23 | #define VIA_CRDR_DDMA_OFF 0x400 | ||
24 | #define VIA_CRDR_PCICTRL_OFF 0x600 | ||
25 | |||
26 | #define VIA_CRDR_MIN_CLOCK 375000 | ||
27 | #define VIA_CRDR_MAX_CLOCK 48000000 | ||
28 | |||
29 | /* | ||
30 | * PCI registers | ||
31 | */ | ||
32 | |||
33 | #define VIA_CRDR_PCI_WORK_MODE 0x40 | ||
34 | #define VIA_CRDR_PCI_DBG_MODE 0x41 | ||
35 | |||
36 | /* | ||
37 | * SDC MMIO Registers | ||
38 | */ | ||
39 | |||
40 | #define VIA_CRDR_SDCTRL 0x0 | ||
41 | #define VIA_CRDR_SDCTRL_START 0x01 | ||
42 | #define VIA_CRDR_SDCTRL_WRITE 0x04 | ||
43 | #define VIA_CRDR_SDCTRL_SINGLE_WR 0x10 | ||
44 | #define VIA_CRDR_SDCTRL_SINGLE_RD 0x20 | ||
45 | #define VIA_CRDR_SDCTRL_MULTI_WR 0x30 | ||
46 | #define VIA_CRDR_SDCTRL_MULTI_RD 0x40 | ||
47 | #define VIA_CRDR_SDCTRL_STOP 0x70 | ||
48 | |||
49 | #define VIA_CRDR_SDCTRL_RSP_NONE 0x0 | ||
50 | #define VIA_CRDR_SDCTRL_RSP_R1 0x10000 | ||
51 | #define VIA_CRDR_SDCTRL_RSP_R2 0x20000 | ||
52 | #define VIA_CRDR_SDCTRL_RSP_R3 0x30000 | ||
53 | #define VIA_CRDR_SDCTRL_RSP_R1B 0x90000 | ||
54 | |||
55 | #define VIA_CRDR_SDCARG 0x4 | ||
56 | |||
57 | #define VIA_CRDR_SDBUSMODE 0x8 | ||
58 | #define VIA_CRDR_SDMODE_4BIT 0x02 | ||
59 | #define VIA_CRDR_SDMODE_CLK_ON 0x40 | ||
60 | |||
61 | #define VIA_CRDR_SDBLKLEN 0xc | ||
62 | /* | ||
63 | * Bit 0 -Bit 10 : Block length. So, the maximum block length should be 2048. | ||
64 | * Bit 11 - Bit 13 : Reserved. | ||
65 | * GPIDET : Select GPI pin to detect card, GPI means CR_CD# in top design. | ||
66 | * INTEN : Enable SD host interrupt. | ||
67 | * Bit 16 - Bit 31 : Block count. So, the maximun block count should be 65536. | ||
68 | */ | ||
69 | #define VIA_CRDR_SDBLKLEN_GPIDET 0x2000 | ||
70 | #define VIA_CRDR_SDBLKLEN_INTEN 0x8000 | ||
71 | #define VIA_CRDR_MAX_BLOCK_COUNT 65536 | ||
72 | #define VIA_CRDR_MAX_BLOCK_LENGTH 2048 | ||
73 | |||
74 | #define VIA_CRDR_SDRESP0 0x10 | ||
75 | #define VIA_CRDR_SDRESP1 0x14 | ||
76 | #define VIA_CRDR_SDRESP2 0x18 | ||
77 | #define VIA_CRDR_SDRESP3 0x1c | ||
78 | |||
79 | #define VIA_CRDR_SDCURBLKCNT 0x20 | ||
80 | |||
81 | #define VIA_CRDR_SDINTMASK 0x24 | ||
82 | /* | ||
83 | * MBDIE : Multiple Blocks transfer Done Interrupt Enable | ||
84 | * BDDIE : Block Data transfer Done Interrupt Enable | ||
85 | * CIRIE : Card Insertion or Removal Interrupt Enable | ||
86 | * CRDIE : Command-Response transfer Done Interrupt Enable | ||
87 | * CRTOIE : Command-Response response TimeOut Interrupt Enable | ||
88 | * ASCRDIE : Auto Stop Command-Response transfer Done Interrupt Enable | ||
89 | * DTIE : Data access Timeout Interrupt Enable | ||
90 | * SCIE : reSponse CRC error Interrupt Enable | ||
91 | * RCIE : Read data CRC error Interrupt Enable | ||
92 | * WCIE : Write data CRC error Interrupt Enable | ||
93 | */ | ||
94 | #define VIA_CRDR_SDINTMASK_MBDIE 0x10 | ||
95 | #define VIA_CRDR_SDINTMASK_BDDIE 0x20 | ||
96 | #define VIA_CRDR_SDINTMASK_CIRIE 0x80 | ||
97 | #define VIA_CRDR_SDINTMASK_CRDIE 0x200 | ||
98 | #define VIA_CRDR_SDINTMASK_CRTOIE 0x400 | ||
99 | #define VIA_CRDR_SDINTMASK_ASCRDIE 0x800 | ||
100 | #define VIA_CRDR_SDINTMASK_DTIE 0x1000 | ||
101 | #define VIA_CRDR_SDINTMASK_SCIE 0x2000 | ||
102 | #define VIA_CRDR_SDINTMASK_RCIE 0x4000 | ||
103 | #define VIA_CRDR_SDINTMASK_WCIE 0x8000 | ||
104 | |||
105 | #define VIA_CRDR_SDACTIVE_INTMASK \ | ||
106 | (VIA_CRDR_SDINTMASK_MBDIE | VIA_CRDR_SDINTMASK_CIRIE \ | ||
107 | | VIA_CRDR_SDINTMASK_CRDIE | VIA_CRDR_SDINTMASK_CRTOIE \ | ||
108 | | VIA_CRDR_SDINTMASK_DTIE | VIA_CRDR_SDINTMASK_SCIE \ | ||
109 | | VIA_CRDR_SDINTMASK_RCIE | VIA_CRDR_SDINTMASK_WCIE) | ||
110 | |||
111 | #define VIA_CRDR_SDSTATUS 0x28 | ||
112 | /* | ||
113 | * CECC : Reserved | ||
114 | * WP : SD card Write Protect status | ||
115 | * SLOTD : Reserved | ||
116 | * SLOTG : SD SLOT status(Gpi pin status) | ||
117 | * MBD : Multiple Blocks transfer Done interrupt status | ||
118 | * BDD : Block Data transfer Done interrupt status | ||
119 | * CD : Reserved | ||
120 | * CIR : Card Insertion or Removal interrupt detected on GPI pin | ||
121 | * IO : Reserved | ||
122 | * CRD : Command-Response transfer Done interrupt status | ||
123 | * CRTO : Command-Response response TimeOut interrupt status | ||
124 | * ASCRDIE : Auto Stop Command-Response transfer Done interrupt status | ||
125 | * DT : Data access Timeout interrupt status | ||
126 | * SC : reSponse CRC error interrupt status | ||
127 | * RC : Read data CRC error interrupt status | ||
128 | * WC : Write data CRC error interrupt status | ||
129 | */ | ||
130 | #define VIA_CRDR_SDSTS_CECC 0x01 | ||
131 | #define VIA_CRDR_SDSTS_WP 0x02 | ||
132 | #define VIA_CRDR_SDSTS_SLOTD 0x04 | ||
133 | #define VIA_CRDR_SDSTS_SLOTG 0x08 | ||
134 | #define VIA_CRDR_SDSTS_MBD 0x10 | ||
135 | #define VIA_CRDR_SDSTS_BDD 0x20 | ||
136 | #define VIA_CRDR_SDSTS_CD 0x40 | ||
137 | #define VIA_CRDR_SDSTS_CIR 0x80 | ||
138 | #define VIA_CRDR_SDSTS_IO 0x100 | ||
139 | #define VIA_CRDR_SDSTS_CRD 0x200 | ||
140 | #define VIA_CRDR_SDSTS_CRTO 0x400 | ||
141 | #define VIA_CRDR_SDSTS_ASCRDIE 0x800 | ||
142 | #define VIA_CRDR_SDSTS_DT 0x1000 | ||
143 | #define VIA_CRDR_SDSTS_SC 0x2000 | ||
144 | #define VIA_CRDR_SDSTS_RC 0x4000 | ||
145 | #define VIA_CRDR_SDSTS_WC 0x8000 | ||
146 | |||
147 | #define VIA_CRDR_SDSTS_IGN_MASK\ | ||
148 | (VIA_CRDR_SDSTS_BDD | VIA_CRDR_SDSTS_ASCRDIE | VIA_CRDR_SDSTS_IO) | ||
149 | #define VIA_CRDR_SDSTS_INT_MASK \ | ||
150 | (VIA_CRDR_SDSTS_MBD | VIA_CRDR_SDSTS_BDD | VIA_CRDR_SDSTS_CD \ | ||
151 | | VIA_CRDR_SDSTS_CIR | VIA_CRDR_SDSTS_IO | VIA_CRDR_SDSTS_CRD \ | ||
152 | | VIA_CRDR_SDSTS_CRTO | VIA_CRDR_SDSTS_ASCRDIE | VIA_CRDR_SDSTS_DT \ | ||
153 | | VIA_CRDR_SDSTS_SC | VIA_CRDR_SDSTS_RC | VIA_CRDR_SDSTS_WC) | ||
154 | #define VIA_CRDR_SDSTS_W1C_MASK \ | ||
155 | (VIA_CRDR_SDSTS_CECC | VIA_CRDR_SDSTS_MBD | VIA_CRDR_SDSTS_BDD \ | ||
156 | | VIA_CRDR_SDSTS_CD | VIA_CRDR_SDSTS_CIR | VIA_CRDR_SDSTS_CRD \ | ||
157 | | VIA_CRDR_SDSTS_CRTO | VIA_CRDR_SDSTS_ASCRDIE | VIA_CRDR_SDSTS_DT \ | ||
158 | | VIA_CRDR_SDSTS_SC | VIA_CRDR_SDSTS_RC | VIA_CRDR_SDSTS_WC) | ||
159 | #define VIA_CRDR_SDSTS_CMD_MASK \ | ||
160 | (VIA_CRDR_SDSTS_CRD | VIA_CRDR_SDSTS_CRTO | VIA_CRDR_SDSTS_SC) | ||
161 | #define VIA_CRDR_SDSTS_DATA_MASK\ | ||
162 | (VIA_CRDR_SDSTS_MBD | VIA_CRDR_SDSTS_DT \ | ||
163 | | VIA_CRDR_SDSTS_RC | VIA_CRDR_SDSTS_WC) | ||
164 | |||
165 | #define VIA_CRDR_SDSTATUS2 0x2a | ||
166 | /* | ||
167 | * CFE : Enable SD host automatic Clock FReezing | ||
168 | */ | ||
169 | #define VIA_CRDR_SDSTS_CFE 0x80 | ||
170 | |||
171 | #define VIA_CRDR_SDRSPTMO 0x2C | ||
172 | |||
173 | #define VIA_CRDR_SDCLKSEL 0x30 | ||
174 | |||
175 | #define VIA_CRDR_SDEXTCTRL 0x34 | ||
176 | #define VIS_CRDR_SDEXTCTRL_AUTOSTOP_SD 0x01 | ||
177 | #define VIS_CRDR_SDEXTCTRL_SHIFT_9 0x02 | ||
178 | #define VIS_CRDR_SDEXTCTRL_MMC_8BIT 0x04 | ||
179 | #define VIS_CRDR_SDEXTCTRL_RELD_BLK 0x08 | ||
180 | #define VIS_CRDR_SDEXTCTRL_BAD_CMDA 0x10 | ||
181 | #define VIS_CRDR_SDEXTCTRL_BAD_DATA 0x20 | ||
182 | #define VIS_CRDR_SDEXTCTRL_AUTOSTOP_SPI 0x40 | ||
183 | #define VIA_CRDR_SDEXTCTRL_HISPD 0x80 | ||
184 | /* 0x38-0xFF reserved */ | ||
185 | |||
186 | /* | ||
187 | * Data DMA Control Registers | ||
188 | */ | ||
189 | |||
190 | #define VIA_CRDR_DMABASEADD 0x0 | ||
191 | #define VIA_CRDR_DMACOUNTER 0x4 | ||
192 | |||
193 | #define VIA_CRDR_DMACTRL 0x8 | ||
194 | /* | ||
195 | * DIR :Transaction Direction | ||
196 | * 0 : From card to memory | ||
197 | * 1 : From memory to card | ||
198 | */ | ||
199 | #define VIA_CRDR_DMACTRL_DIR 0x100 | ||
200 | #define VIA_CRDR_DMACTRL_ENIRQ 0x10000 | ||
201 | #define VIA_CRDR_DMACTRL_SFTRST 0x1000000 | ||
202 | |||
203 | #define VIA_CRDR_DMASTS 0xc | ||
204 | |||
205 | #define VIA_CRDR_DMASTART 0x10 | ||
206 | /*0x14-0xFF reserved*/ | ||
207 | |||
208 | /* | ||
209 | * PCI Control Registers | ||
210 | */ | ||
211 | |||
212 | /*0x0 - 0x1 reserved*/ | ||
213 | #define VIA_CRDR_PCICLKGATT 0x2 | ||
214 | /* | ||
215 | * SFTRST : | ||
216 | * 0 : Soft reset all the controller and it will be de-asserted automatically | ||
217 | * 1 : Soft reset is de-asserted | ||
218 | */ | ||
219 | #define VIA_CRDR_PCICLKGATT_SFTRST 0x01 | ||
220 | /* | ||
221 | * 3V3 : Pad power select | ||
222 | * 0 : 1.8V | ||
223 | * 1 : 3.3V | ||
224 | * NOTE : No mater what the actual value should be, this bit always | ||
225 | * read as 0. This is a hardware bug. | ||
226 | */ | ||
227 | #define VIA_CRDR_PCICLKGATT_3V3 0x10 | ||
228 | /* | ||
229 | * PAD_PWRON : Pad Power on/off select | ||
230 | * 0 : Power off | ||
231 | * 1 : Power on | ||
232 | * NOTE : No mater what the actual value should be, this bit always | ||
233 | * read as 0. This is a hardware bug. | ||
234 | */ | ||
235 | #define VIA_CRDR_PCICLKGATT_PAD_PWRON 0x20 | ||
236 | |||
237 | #define VIA_CRDR_PCISDCCLK 0x5 | ||
238 | |||
239 | #define VIA_CRDR_PCIDMACLK 0x7 | ||
240 | #define VIA_CRDR_PCIDMACLK_SDC 0x2 | ||
241 | |||
242 | #define VIA_CRDR_PCIINTCTRL 0x8 | ||
243 | #define VIA_CRDR_PCIINTCTRL_SDCIRQEN 0x04 | ||
244 | |||
245 | #define VIA_CRDR_PCIINTSTATUS 0x9 | ||
246 | #define VIA_CRDR_PCIINTSTATUS_SDC 0x04 | ||
247 | |||
248 | #define VIA_CRDR_PCITMOCTRL 0xa | ||
249 | #define VIA_CRDR_PCITMOCTRL_NO 0x0 | ||
250 | #define VIA_CRDR_PCITMOCTRL_32US 0x1 | ||
251 | #define VIA_CRDR_PCITMOCTRL_256US 0x2 | ||
252 | #define VIA_CRDR_PCITMOCTRL_1024US 0x3 | ||
253 | #define VIA_CRDR_PCITMOCTRL_256MS 0x4 | ||
254 | #define VIA_CRDR_PCITMOCTRL_512MS 0x5 | ||
255 | #define VIA_CRDR_PCITMOCTRL_1024MS 0x6 | ||
256 | |||
257 | /*0xB-0xFF reserved*/ | ||
258 | |||
259 | enum PCI_HOST_CLK_CONTROL { | ||
260 | PCI_CLK_375K = 0x03, | ||
261 | PCI_CLK_8M = 0x04, | ||
262 | PCI_CLK_12M = 0x00, | ||
263 | PCI_CLK_16M = 0x05, | ||
264 | PCI_CLK_24M = 0x01, | ||
265 | PCI_CLK_33M = 0x06, | ||
266 | PCI_CLK_48M = 0x02 | ||
267 | }; | ||
268 | |||
269 | struct sdhcreg { | ||
270 | u32 sdcontrol_reg; | ||
271 | u32 sdcmdarg_reg; | ||
272 | u32 sdbusmode_reg; | ||
273 | u32 sdblklen_reg; | ||
274 | u32 sdresp_reg[4]; | ||
275 | u32 sdcurblkcnt_reg; | ||
276 | u32 sdintmask_reg; | ||
277 | u32 sdstatus_reg; | ||
278 | u32 sdrsptmo_reg; | ||
279 | u32 sdclksel_reg; | ||
280 | u32 sdextctrl_reg; | ||
281 | }; | ||
282 | |||
283 | struct pcictrlreg { | ||
284 | u8 reserve[2]; | ||
285 | u8 pciclkgat_reg; | ||
286 | u8 pcinfcclk_reg; | ||
287 | u8 pcimscclk_reg; | ||
288 | u8 pcisdclk_reg; | ||
289 | u8 pcicaclk_reg; | ||
290 | u8 pcidmaclk_reg; | ||
291 | u8 pciintctrl_reg; | ||
292 | u8 pciintstatus_reg; | ||
293 | u8 pcitmoctrl_reg; | ||
294 | u8 Resv; | ||
295 | }; | ||
296 | |||
297 | struct via_crdr_mmc_host { | ||
298 | struct mmc_host *mmc; | ||
299 | struct mmc_request *mrq; | ||
300 | struct mmc_command *cmd; | ||
301 | struct mmc_data *data; | ||
302 | |||
303 | void __iomem *mmiobase; | ||
304 | void __iomem *sdhc_mmiobase; | ||
305 | void __iomem *ddma_mmiobase; | ||
306 | void __iomem *pcictrl_mmiobase; | ||
307 | |||
308 | struct pcictrlreg pm_pcictrl_reg; | ||
309 | struct sdhcreg pm_sdhc_reg; | ||
310 | |||
311 | struct work_struct carddet_work; | ||
312 | struct tasklet_struct finish_tasklet; | ||
313 | |||
314 | struct timer_list timer; | ||
315 | spinlock_t lock; | ||
316 | u8 power; | ||
317 | int reject; | ||
318 | unsigned int quirks; | ||
319 | }; | ||
320 | |||
321 | /* some devices need a very long delay for power to stabilize */ | ||
322 | #define VIA_CRDR_QUIRK_300MS_PWRDELAY 0x0001 | ||
323 | |||
324 | static struct pci_device_id via_ids[] = { | ||
325 | {PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_9530, | ||
326 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0,}, | ||
327 | {0,} | ||
328 | }; | ||
329 | |||
330 | MODULE_DEVICE_TABLE(pci, via_ids); | ||
331 | |||
332 | static void via_print_sdchc(struct via_crdr_mmc_host *host) | ||
333 | { | ||
334 | void __iomem *addrbase = host->sdhc_mmiobase; | ||
335 | |||
336 | pr_debug("SDC MMIO Registers:\n"); | ||
337 | pr_debug("SDCONTROL=%08x, SDCMDARG=%08x, SDBUSMODE=%08x\n", | ||
338 | readl(addrbase + VIA_CRDR_SDCTRL), | ||
339 | readl(addrbase + VIA_CRDR_SDCARG), | ||
340 | readl(addrbase + VIA_CRDR_SDBUSMODE)); | ||
341 | pr_debug("SDBLKLEN=%08x, SDCURBLKCNT=%08x, SDINTMASK=%08x\n", | ||
342 | readl(addrbase + VIA_CRDR_SDBLKLEN), | ||
343 | readl(addrbase + VIA_CRDR_SDCURBLKCNT), | ||
344 | readl(addrbase + VIA_CRDR_SDINTMASK)); | ||
345 | pr_debug("SDSTATUS=%08x, SDCLKSEL=%08x, SDEXTCTRL=%08x\n", | ||
346 | readl(addrbase + VIA_CRDR_SDSTATUS), | ||
347 | readl(addrbase + VIA_CRDR_SDCLKSEL), | ||
348 | readl(addrbase + VIA_CRDR_SDEXTCTRL)); | ||
349 | } | ||
350 | |||
351 | static void via_print_pcictrl(struct via_crdr_mmc_host *host) | ||
352 | { | ||
353 | void __iomem *addrbase = host->pcictrl_mmiobase; | ||
354 | |||
355 | pr_debug("PCI Control Registers:\n"); | ||
356 | pr_debug("PCICLKGATT=%02x, PCISDCCLK=%02x, PCIDMACLK=%02x\n", | ||
357 | readb(addrbase + VIA_CRDR_PCICLKGATT), | ||
358 | readb(addrbase + VIA_CRDR_PCISDCCLK), | ||
359 | readb(addrbase + VIA_CRDR_PCIDMACLK)); | ||
360 | pr_debug("PCIINTCTRL=%02x, PCIINTSTATUS=%02x\n", | ||
361 | readb(addrbase + VIA_CRDR_PCIINTCTRL), | ||
362 | readb(addrbase + VIA_CRDR_PCIINTSTATUS)); | ||
363 | } | ||
364 | |||
365 | static void via_save_pcictrlreg(struct via_crdr_mmc_host *host) | ||
366 | { | ||
367 | struct pcictrlreg *pm_pcictrl_reg; | ||
368 | void __iomem *addrbase; | ||
369 | |||
370 | pm_pcictrl_reg = &(host->pm_pcictrl_reg); | ||
371 | addrbase = host->pcictrl_mmiobase; | ||
372 | |||
373 | pm_pcictrl_reg->pciclkgat_reg = readb(addrbase + VIA_CRDR_PCICLKGATT); | ||
374 | pm_pcictrl_reg->pciclkgat_reg |= | ||
375 | VIA_CRDR_PCICLKGATT_3V3 | VIA_CRDR_PCICLKGATT_PAD_PWRON; | ||
376 | pm_pcictrl_reg->pcisdclk_reg = readb(addrbase + VIA_CRDR_PCISDCCLK); | ||
377 | pm_pcictrl_reg->pcidmaclk_reg = readb(addrbase + VIA_CRDR_PCIDMACLK); | ||
378 | pm_pcictrl_reg->pciintctrl_reg = readb(addrbase + VIA_CRDR_PCIINTCTRL); | ||
379 | pm_pcictrl_reg->pciintstatus_reg = | ||
380 | readb(addrbase + VIA_CRDR_PCIINTSTATUS); | ||
381 | pm_pcictrl_reg->pcitmoctrl_reg = readb(addrbase + VIA_CRDR_PCITMOCTRL); | ||
382 | } | ||
383 | |||
384 | static void via_restore_pcictrlreg(struct via_crdr_mmc_host *host) | ||
385 | { | ||
386 | struct pcictrlreg *pm_pcictrl_reg; | ||
387 | void __iomem *addrbase; | ||
388 | |||
389 | pm_pcictrl_reg = &(host->pm_pcictrl_reg); | ||
390 | addrbase = host->pcictrl_mmiobase; | ||
391 | |||
392 | writeb(pm_pcictrl_reg->pciclkgat_reg, addrbase + VIA_CRDR_PCICLKGATT); | ||
393 | writeb(pm_pcictrl_reg->pcisdclk_reg, addrbase + VIA_CRDR_PCISDCCLK); | ||
394 | writeb(pm_pcictrl_reg->pcidmaclk_reg, addrbase + VIA_CRDR_PCIDMACLK); | ||
395 | writeb(pm_pcictrl_reg->pciintctrl_reg, addrbase + VIA_CRDR_PCIINTCTRL); | ||
396 | writeb(pm_pcictrl_reg->pciintstatus_reg, | ||
397 | addrbase + VIA_CRDR_PCIINTSTATUS); | ||
398 | writeb(pm_pcictrl_reg->pcitmoctrl_reg, addrbase + VIA_CRDR_PCITMOCTRL); | ||
399 | } | ||
400 | |||
401 | static void via_save_sdcreg(struct via_crdr_mmc_host *host) | ||
402 | { | ||
403 | struct sdhcreg *pm_sdhc_reg; | ||
404 | void __iomem *addrbase; | ||
405 | |||
406 | pm_sdhc_reg = &(host->pm_sdhc_reg); | ||
407 | addrbase = host->sdhc_mmiobase; | ||
408 | |||
409 | pm_sdhc_reg->sdcontrol_reg = readl(addrbase + VIA_CRDR_SDCTRL); | ||
410 | pm_sdhc_reg->sdcmdarg_reg = readl(addrbase + VIA_CRDR_SDCARG); | ||
411 | pm_sdhc_reg->sdbusmode_reg = readl(addrbase + VIA_CRDR_SDBUSMODE); | ||
412 | pm_sdhc_reg->sdblklen_reg = readl(addrbase + VIA_CRDR_SDBLKLEN); | ||
413 | pm_sdhc_reg->sdcurblkcnt_reg = readl(addrbase + VIA_CRDR_SDCURBLKCNT); | ||
414 | pm_sdhc_reg->sdintmask_reg = readl(addrbase + VIA_CRDR_SDINTMASK); | ||
415 | pm_sdhc_reg->sdstatus_reg = readl(addrbase + VIA_CRDR_SDSTATUS); | ||
416 | pm_sdhc_reg->sdrsptmo_reg = readl(addrbase + VIA_CRDR_SDRSPTMO); | ||
417 | pm_sdhc_reg->sdclksel_reg = readl(addrbase + VIA_CRDR_SDCLKSEL); | ||
418 | pm_sdhc_reg->sdextctrl_reg = readl(addrbase + VIA_CRDR_SDEXTCTRL); | ||
419 | } | ||
420 | |||
421 | static void via_restore_sdcreg(struct via_crdr_mmc_host *host) | ||
422 | { | ||
423 | struct sdhcreg *pm_sdhc_reg; | ||
424 | void __iomem *addrbase; | ||
425 | |||
426 | pm_sdhc_reg = &(host->pm_sdhc_reg); | ||
427 | addrbase = host->sdhc_mmiobase; | ||
428 | |||
429 | writel(pm_sdhc_reg->sdcontrol_reg, addrbase + VIA_CRDR_SDCTRL); | ||
430 | writel(pm_sdhc_reg->sdcmdarg_reg, addrbase + VIA_CRDR_SDCARG); | ||
431 | writel(pm_sdhc_reg->sdbusmode_reg, addrbase + VIA_CRDR_SDBUSMODE); | ||
432 | writel(pm_sdhc_reg->sdblklen_reg, addrbase + VIA_CRDR_SDBLKLEN); | ||
433 | writel(pm_sdhc_reg->sdcurblkcnt_reg, addrbase + VIA_CRDR_SDCURBLKCNT); | ||
434 | writel(pm_sdhc_reg->sdintmask_reg, addrbase + VIA_CRDR_SDINTMASK); | ||
435 | writel(pm_sdhc_reg->sdstatus_reg, addrbase + VIA_CRDR_SDSTATUS); | ||
436 | writel(pm_sdhc_reg->sdrsptmo_reg, addrbase + VIA_CRDR_SDRSPTMO); | ||
437 | writel(pm_sdhc_reg->sdclksel_reg, addrbase + VIA_CRDR_SDCLKSEL); | ||
438 | writel(pm_sdhc_reg->sdextctrl_reg, addrbase + VIA_CRDR_SDEXTCTRL); | ||
439 | } | ||
440 | |||
441 | static void via_pwron_sleep(struct via_crdr_mmc_host *sdhost) | ||
442 | { | ||
443 | if (sdhost->quirks & VIA_CRDR_QUIRK_300MS_PWRDELAY) | ||
444 | msleep(300); | ||
445 | else | ||
446 | msleep(3); | ||
447 | } | ||
448 | |||
449 | static void via_set_ddma(struct via_crdr_mmc_host *host, | ||
450 | dma_addr_t dmaaddr, u32 count, int dir, int enirq) | ||
451 | { | ||
452 | void __iomem *addrbase; | ||
453 | u32 ctrl_data = 0; | ||
454 | |||
455 | if (enirq) | ||
456 | ctrl_data |= VIA_CRDR_DMACTRL_ENIRQ; | ||
457 | |||
458 | if (dir) | ||
459 | ctrl_data |= VIA_CRDR_DMACTRL_DIR; | ||
460 | |||
461 | addrbase = host->ddma_mmiobase; | ||
462 | |||
463 | writel(dmaaddr, addrbase + VIA_CRDR_DMABASEADD); | ||
464 | writel(count, addrbase + VIA_CRDR_DMACOUNTER); | ||
465 | writel(ctrl_data, addrbase + VIA_CRDR_DMACTRL); | ||
466 | writel(0x01, addrbase + VIA_CRDR_DMASTART); | ||
467 | |||
468 | /* It seems that our DMA can not work normally with 375kHz clock */ | ||
469 | /* FIXME: don't brute-force 8MHz but use PIO at 375kHz !! */ | ||
470 | addrbase = host->pcictrl_mmiobase; | ||
471 | if (readb(addrbase + VIA_CRDR_PCISDCCLK) == PCI_CLK_375K) { | ||
472 | dev_info(host->mmc->parent, "forcing card speed to 8MHz\n"); | ||
473 | writeb(PCI_CLK_8M, addrbase + VIA_CRDR_PCISDCCLK); | ||
474 | } | ||
475 | } | ||
476 | |||
477 | static void via_sdc_preparedata(struct via_crdr_mmc_host *host, | ||
478 | struct mmc_data *data) | ||
479 | { | ||
480 | void __iomem *addrbase; | ||
481 | u32 blk_reg; | ||
482 | int count; | ||
483 | |||
484 | WARN_ON(host->data); | ||
485 | |||
486 | /* Sanity checks */ | ||
487 | BUG_ON(data->blksz > host->mmc->max_blk_size); | ||
488 | BUG_ON(data->blocks > host->mmc->max_blk_count); | ||
489 | |||
490 | host->data = data; | ||
491 | |||
492 | count = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len, | ||
493 | ((data->flags & MMC_DATA_READ) ? | ||
494 | PCI_DMA_FROMDEVICE : PCI_DMA_TODEVICE)); | ||
495 | BUG_ON(count != 1); | ||
496 | |||
497 | via_set_ddma(host, sg_dma_address(data->sg), sg_dma_len(data->sg), | ||
498 | (data->flags & MMC_DATA_WRITE) ? 1 : 0, 1); | ||
499 | |||
500 | addrbase = host->sdhc_mmiobase; | ||
501 | |||
502 | blk_reg = data->blksz - 1; | ||
503 | blk_reg |= VIA_CRDR_SDBLKLEN_GPIDET | VIA_CRDR_SDBLKLEN_INTEN; | ||
504 | blk_reg |= (data->blocks) << 16; | ||
505 | |||
506 | writel(blk_reg, addrbase + VIA_CRDR_SDBLKLEN); | ||
507 | } | ||
508 | |||
509 | static void via_sdc_get_response(struct via_crdr_mmc_host *host, | ||
510 | struct mmc_command *cmd) | ||
511 | { | ||
512 | void __iomem *addrbase = host->sdhc_mmiobase; | ||
513 | u32 dwdata0 = readl(addrbase + VIA_CRDR_SDRESP0); | ||
514 | u32 dwdata1 = readl(addrbase + VIA_CRDR_SDRESP1); | ||
515 | u32 dwdata2 = readl(addrbase + VIA_CRDR_SDRESP2); | ||
516 | u32 dwdata3 = readl(addrbase + VIA_CRDR_SDRESP3); | ||
517 | |||
518 | if (cmd->flags & MMC_RSP_136) { | ||
519 | cmd->resp[0] = ((u8) (dwdata1)) | | ||
520 | (((u8) (dwdata0 >> 24)) << 8) | | ||
521 | (((u8) (dwdata0 >> 16)) << 16) | | ||
522 | (((u8) (dwdata0 >> 8)) << 24); | ||
523 | |||
524 | cmd->resp[1] = ((u8) (dwdata2)) | | ||
525 | (((u8) (dwdata1 >> 24)) << 8) | | ||
526 | (((u8) (dwdata1 >> 16)) << 16) | | ||
527 | (((u8) (dwdata1 >> 8)) << 24); | ||
528 | |||
529 | cmd->resp[2] = ((u8) (dwdata3)) | | ||
530 | (((u8) (dwdata2 >> 24)) << 8) | | ||
531 | (((u8) (dwdata2 >> 16)) << 16) | | ||
532 | (((u8) (dwdata2 >> 8)) << 24); | ||
533 | |||
534 | cmd->resp[3] = 0xff | | ||
535 | ((((u8) (dwdata3 >> 24))) << 8) | | ||
536 | (((u8) (dwdata3 >> 16)) << 16) | | ||
537 | (((u8) (dwdata3 >> 8)) << 24); | ||
538 | } else { | ||
539 | dwdata0 >>= 8; | ||
540 | cmd->resp[0] = ((dwdata0 & 0xff) << 24) | | ||
541 | (((dwdata0 >> 8) & 0xff) << 16) | | ||
542 | (((dwdata0 >> 16) & 0xff) << 8) | (dwdata1 & 0xff); | ||
543 | |||
544 | dwdata1 >>= 8; | ||
545 | cmd->resp[1] = ((dwdata1 & 0xff) << 24) | | ||
546 | (((dwdata1 >> 8) & 0xff) << 16) | | ||
547 | (((dwdata1 >> 16) & 0xff) << 8); | ||
548 | } | ||
549 | } | ||
550 | |||
551 | static void via_sdc_send_command(struct via_crdr_mmc_host *host, | ||
552 | struct mmc_command *cmd) | ||
553 | { | ||
554 | void __iomem *addrbase; | ||
555 | struct mmc_data *data; | ||
556 | u32 cmdctrl = 0; | ||
557 | |||
558 | WARN_ON(host->cmd); | ||
559 | |||
560 | data = cmd->data; | ||
561 | mod_timer(&host->timer, jiffies + HZ); | ||
562 | host->cmd = cmd; | ||
563 | |||
564 | /*Command index*/ | ||
565 | cmdctrl = cmd->opcode << 8; | ||
566 | |||
567 | /*Response type*/ | ||
568 | switch (mmc_resp_type(cmd)) { | ||
569 | case MMC_RSP_NONE: | ||
570 | cmdctrl |= VIA_CRDR_SDCTRL_RSP_NONE; | ||
571 | break; | ||
572 | case MMC_RSP_R1: | ||
573 | cmdctrl |= VIA_CRDR_SDCTRL_RSP_R1; | ||
574 | break; | ||
575 | case MMC_RSP_R1B: | ||
576 | cmdctrl |= VIA_CRDR_SDCTRL_RSP_R1B; | ||
577 | break; | ||
578 | case MMC_RSP_R2: | ||
579 | cmdctrl |= VIA_CRDR_SDCTRL_RSP_R2; | ||
580 | break; | ||
581 | case MMC_RSP_R3: | ||
582 | cmdctrl |= VIA_CRDR_SDCTRL_RSP_R3; | ||
583 | break; | ||
584 | default: | ||
585 | pr_err("%s: cmd->flag is not valid\n", mmc_hostname(host->mmc)); | ||
586 | break; | ||
587 | } | ||
588 | |||
589 | if (!(cmd->data)) | ||
590 | goto nodata; | ||
591 | |||
592 | via_sdc_preparedata(host, data); | ||
593 | |||
594 | /*Command control*/ | ||
595 | if (data->blocks > 1) { | ||
596 | if (data->flags & MMC_DATA_WRITE) { | ||
597 | cmdctrl |= VIA_CRDR_SDCTRL_WRITE; | ||
598 | cmdctrl |= VIA_CRDR_SDCTRL_MULTI_WR; | ||
599 | } else { | ||
600 | cmdctrl |= VIA_CRDR_SDCTRL_MULTI_RD; | ||
601 | } | ||
602 | } else { | ||
603 | if (data->flags & MMC_DATA_WRITE) { | ||
604 | cmdctrl |= VIA_CRDR_SDCTRL_WRITE; | ||
605 | cmdctrl |= VIA_CRDR_SDCTRL_SINGLE_WR; | ||
606 | } else { | ||
607 | cmdctrl |= VIA_CRDR_SDCTRL_SINGLE_RD; | ||
608 | } | ||
609 | } | ||
610 | |||
611 | nodata: | ||
612 | if (cmd == host->mrq->stop) | ||
613 | cmdctrl |= VIA_CRDR_SDCTRL_STOP; | ||
614 | |||
615 | cmdctrl |= VIA_CRDR_SDCTRL_START; | ||
616 | |||
617 | addrbase = host->sdhc_mmiobase; | ||
618 | writel(cmd->arg, addrbase + VIA_CRDR_SDCARG); | ||
619 | writel(cmdctrl, addrbase + VIA_CRDR_SDCTRL); | ||
620 | } | ||
621 | |||
622 | static void via_sdc_finish_data(struct via_crdr_mmc_host *host) | ||
623 | { | ||
624 | struct mmc_data *data; | ||
625 | |||
626 | BUG_ON(!host->data); | ||
627 | |||
628 | data = host->data; | ||
629 | host->data = NULL; | ||
630 | |||
631 | if (data->error) | ||
632 | data->bytes_xfered = 0; | ||
633 | else | ||
634 | data->bytes_xfered = data->blocks * data->blksz; | ||
635 | |||
636 | dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len, | ||
637 | ((data->flags & MMC_DATA_READ) ? | ||
638 | PCI_DMA_FROMDEVICE : PCI_DMA_TODEVICE)); | ||
639 | |||
640 | if (data->stop) | ||
641 | via_sdc_send_command(host, data->stop); | ||
642 | else | ||
643 | tasklet_schedule(&host->finish_tasklet); | ||
644 | } | ||
645 | |||
646 | static void via_sdc_finish_command(struct via_crdr_mmc_host *host) | ||
647 | { | ||
648 | via_sdc_get_response(host, host->cmd); | ||
649 | |||
650 | host->cmd->error = 0; | ||
651 | |||
652 | if (!host->cmd->data) | ||
653 | tasklet_schedule(&host->finish_tasklet); | ||
654 | |||
655 | host->cmd = NULL; | ||
656 | } | ||
657 | |||
658 | static void via_sdc_request(struct mmc_host *mmc, struct mmc_request *mrq) | ||
659 | { | ||
660 | void __iomem *addrbase; | ||
661 | struct via_crdr_mmc_host *host; | ||
662 | unsigned long flags; | ||
663 | u16 status; | ||
664 | |||
665 | host = mmc_priv(mmc); | ||
666 | |||
667 | spin_lock_irqsave(&host->lock, flags); | ||
668 | |||
669 | addrbase = host->pcictrl_mmiobase; | ||
670 | writeb(VIA_CRDR_PCIDMACLK_SDC, addrbase + VIA_CRDR_PCIDMACLK); | ||
671 | |||
672 | status = readw(host->sdhc_mmiobase + VIA_CRDR_SDSTATUS); | ||
673 | status &= VIA_CRDR_SDSTS_W1C_MASK; | ||
674 | writew(status, host->sdhc_mmiobase + VIA_CRDR_SDSTATUS); | ||
675 | |||
676 | WARN_ON(host->mrq != NULL); | ||
677 | host->mrq = mrq; | ||
678 | |||
679 | status = readw(host->sdhc_mmiobase + VIA_CRDR_SDSTATUS); | ||
680 | if (!(status & VIA_CRDR_SDSTS_SLOTG) || host->reject) { | ||
681 | host->mrq->cmd->error = -ENOMEDIUM; | ||
682 | tasklet_schedule(&host->finish_tasklet); | ||
683 | } else { | ||
684 | via_sdc_send_command(host, mrq->cmd); | ||
685 | } | ||
686 | |||
687 | mmiowb(); | ||
688 | spin_unlock_irqrestore(&host->lock, flags); | ||
689 | } | ||
690 | |||
691 | static void via_sdc_set_power(struct via_crdr_mmc_host *host, | ||
692 | unsigned short power, unsigned int on) | ||
693 | { | ||
694 | unsigned long flags; | ||
695 | u8 gatt; | ||
696 | |||
697 | spin_lock_irqsave(&host->lock, flags); | ||
698 | |||
699 | host->power = (1 << power); | ||
700 | |||
701 | gatt = readb(host->pcictrl_mmiobase + VIA_CRDR_PCICLKGATT); | ||
702 | if (host->power == MMC_VDD_165_195) | ||
703 | gatt &= ~VIA_CRDR_PCICLKGATT_3V3; | ||
704 | else | ||
705 | gatt |= VIA_CRDR_PCICLKGATT_3V3; | ||
706 | if (on) | ||
707 | gatt |= VIA_CRDR_PCICLKGATT_PAD_PWRON; | ||
708 | else | ||
709 | gatt &= ~VIA_CRDR_PCICLKGATT_PAD_PWRON; | ||
710 | writeb(gatt, host->pcictrl_mmiobase + VIA_CRDR_PCICLKGATT); | ||
711 | |||
712 | mmiowb(); | ||
713 | spin_unlock_irqrestore(&host->lock, flags); | ||
714 | |||
715 | via_pwron_sleep(host); | ||
716 | } | ||
717 | |||
718 | static void via_sdc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) | ||
719 | { | ||
720 | struct via_crdr_mmc_host *host; | ||
721 | unsigned long flags; | ||
722 | void __iomem *addrbase; | ||
723 | u32 org_data, sdextctrl; | ||
724 | u8 clock; | ||
725 | |||
726 | host = mmc_priv(mmc); | ||
727 | |||
728 | spin_lock_irqsave(&host->lock, flags); | ||
729 | |||
730 | addrbase = host->sdhc_mmiobase; | ||
731 | org_data = readl(addrbase + VIA_CRDR_SDBUSMODE); | ||
732 | sdextctrl = readl(addrbase + VIA_CRDR_SDEXTCTRL); | ||
733 | |||
734 | if (ios->bus_width == MMC_BUS_WIDTH_1) | ||
735 | org_data &= ~VIA_CRDR_SDMODE_4BIT; | ||
736 | else | ||
737 | org_data |= VIA_CRDR_SDMODE_4BIT; | ||
738 | |||
739 | if (ios->power_mode == MMC_POWER_OFF) | ||
740 | org_data &= ~VIA_CRDR_SDMODE_CLK_ON; | ||
741 | else | ||
742 | org_data |= VIA_CRDR_SDMODE_CLK_ON; | ||
743 | |||
744 | if (ios->timing == MMC_TIMING_SD_HS) | ||
745 | sdextctrl |= VIA_CRDR_SDEXTCTRL_HISPD; | ||
746 | else | ||
747 | sdextctrl &= ~VIA_CRDR_SDEXTCTRL_HISPD; | ||
748 | |||
749 | writel(org_data, addrbase + VIA_CRDR_SDBUSMODE); | ||
750 | writel(sdextctrl, addrbase + VIA_CRDR_SDEXTCTRL); | ||
751 | |||
752 | if (ios->clock >= 48000000) | ||
753 | clock = PCI_CLK_48M; | ||
754 | else if (ios->clock >= 33000000) | ||
755 | clock = PCI_CLK_33M; | ||
756 | else if (ios->clock >= 24000000) | ||
757 | clock = PCI_CLK_24M; | ||
758 | else if (ios->clock >= 16000000) | ||
759 | clock = PCI_CLK_16M; | ||
760 | else if (ios->clock >= 12000000) | ||
761 | clock = PCI_CLK_12M; | ||
762 | else if (ios->clock >= 8000000) | ||
763 | clock = PCI_CLK_8M; | ||
764 | else | ||
765 | clock = PCI_CLK_375K; | ||
766 | |||
767 | addrbase = host->pcictrl_mmiobase; | ||
768 | if (readb(addrbase + VIA_CRDR_PCISDCCLK) != clock) | ||
769 | writeb(clock, addrbase + VIA_CRDR_PCISDCCLK); | ||
770 | |||
771 | mmiowb(); | ||
772 | spin_unlock_irqrestore(&host->lock, flags); | ||
773 | |||
774 | if (ios->power_mode != MMC_POWER_OFF) | ||
775 | via_sdc_set_power(host, ios->vdd, 1); | ||
776 | else | ||
777 | via_sdc_set_power(host, ios->vdd, 0); | ||
778 | } | ||
779 | |||
780 | static int via_sdc_get_ro(struct mmc_host *mmc) | ||
781 | { | ||
782 | struct via_crdr_mmc_host *host; | ||
783 | unsigned long flags; | ||
784 | u16 status; | ||
785 | |||
786 | host = mmc_priv(mmc); | ||
787 | |||
788 | spin_lock_irqsave(&host->lock, flags); | ||
789 | |||
790 | status = readw(host->sdhc_mmiobase + VIA_CRDR_SDSTATUS); | ||
791 | |||
792 | spin_unlock_irqrestore(&host->lock, flags); | ||
793 | |||
794 | return !(status & VIA_CRDR_SDSTS_WP); | ||
795 | } | ||
796 | |||
797 | static const struct mmc_host_ops via_sdc_ops = { | ||
798 | .request = via_sdc_request, | ||
799 | .set_ios = via_sdc_set_ios, | ||
800 | .get_ro = via_sdc_get_ro, | ||
801 | }; | ||
802 | |||
803 | static void via_reset_pcictrl(struct via_crdr_mmc_host *host) | ||
804 | { | ||
805 | void __iomem *addrbase; | ||
806 | unsigned long flags; | ||
807 | u8 gatt; | ||
808 | |||
809 | addrbase = host->pcictrl_mmiobase; | ||
810 | |||
811 | spin_lock_irqsave(&host->lock, flags); | ||
812 | |||
813 | via_save_pcictrlreg(host); | ||
814 | via_save_sdcreg(host); | ||
815 | |||
816 | spin_unlock_irqrestore(&host->lock, flags); | ||
817 | |||
818 | gatt = VIA_CRDR_PCICLKGATT_PAD_PWRON; | ||
819 | if (host->power == MMC_VDD_165_195) | ||
820 | gatt &= VIA_CRDR_PCICLKGATT_3V3; | ||
821 | else | ||
822 | gatt |= VIA_CRDR_PCICLKGATT_3V3; | ||
823 | writeb(gatt, host->pcictrl_mmiobase + VIA_CRDR_PCICLKGATT); | ||
824 | via_pwron_sleep(host); | ||
825 | gatt |= VIA_CRDR_PCICLKGATT_SFTRST; | ||
826 | writeb(gatt, host->pcictrl_mmiobase + VIA_CRDR_PCICLKGATT); | ||
827 | msleep(3); | ||
828 | |||
829 | spin_lock_irqsave(&host->lock, flags); | ||
830 | |||
831 | via_restore_pcictrlreg(host); | ||
832 | via_restore_sdcreg(host); | ||
833 | |||
834 | mmiowb(); | ||
835 | spin_unlock_irqrestore(&host->lock, flags); | ||
836 | } | ||
837 | |||
838 | static void via_sdc_cmd_isr(struct via_crdr_mmc_host *host, u16 intmask) | ||
839 | { | ||
840 | BUG_ON(intmask == 0); | ||
841 | |||
842 | if (!host->cmd) { | ||
843 | pr_err("%s: Got command interrupt 0x%x even " | ||
844 | "though no command operation was in progress.\n", | ||
845 | mmc_hostname(host->mmc), intmask); | ||
846 | return; | ||
847 | } | ||
848 | |||
849 | if (intmask & VIA_CRDR_SDSTS_CRTO) | ||
850 | host->cmd->error = -ETIMEDOUT; | ||
851 | else if (intmask & VIA_CRDR_SDSTS_SC) | ||
852 | host->cmd->error = -EILSEQ; | ||
853 | |||
854 | if (host->cmd->error) | ||
855 | tasklet_schedule(&host->finish_tasklet); | ||
856 | else if (intmask & VIA_CRDR_SDSTS_CRD) | ||
857 | via_sdc_finish_command(host); | ||
858 | } | ||
859 | |||
860 | static void via_sdc_data_isr(struct via_crdr_mmc_host *host, u16 intmask) | ||
861 | { | ||
862 | BUG_ON(intmask == 0); | ||
863 | |||
864 | if (intmask & VIA_CRDR_SDSTS_DT) | ||
865 | host->data->error = -ETIMEDOUT; | ||
866 | else if (intmask & (VIA_CRDR_SDSTS_RC | VIA_CRDR_SDSTS_WC)) | ||
867 | host->data->error = -EILSEQ; | ||
868 | |||
869 | via_sdc_finish_data(host); | ||
870 | } | ||
871 | |||
872 | static irqreturn_t via_sdc_isr(int irq, void *dev_id) | ||
873 | { | ||
874 | struct via_crdr_mmc_host *sdhost = dev_id; | ||
875 | void __iomem *addrbase; | ||
876 | u8 pci_status; | ||
877 | u16 sd_status; | ||
878 | irqreturn_t result; | ||
879 | |||
880 | if (!sdhost) | ||
881 | return IRQ_NONE; | ||
882 | |||
883 | spin_lock(&sdhost->lock); | ||
884 | |||
885 | addrbase = sdhost->pcictrl_mmiobase; | ||
886 | pci_status = readb(addrbase + VIA_CRDR_PCIINTSTATUS); | ||
887 | if (!(pci_status & VIA_CRDR_PCIINTSTATUS_SDC)) { | ||
888 | result = IRQ_NONE; | ||
889 | goto out; | ||
890 | } | ||
891 | |||
892 | addrbase = sdhost->sdhc_mmiobase; | ||
893 | sd_status = readw(addrbase + VIA_CRDR_SDSTATUS); | ||
894 | sd_status &= VIA_CRDR_SDSTS_INT_MASK; | ||
895 | sd_status &= ~VIA_CRDR_SDSTS_IGN_MASK; | ||
896 | if (!sd_status) { | ||
897 | result = IRQ_NONE; | ||
898 | goto out; | ||
899 | } | ||
900 | |||
901 | if (sd_status & VIA_CRDR_SDSTS_CIR) { | ||
902 | writew(sd_status & VIA_CRDR_SDSTS_CIR, | ||
903 | addrbase + VIA_CRDR_SDSTATUS); | ||
904 | |||
905 | schedule_work(&sdhost->carddet_work); | ||
906 | } | ||
907 | |||
908 | sd_status &= ~VIA_CRDR_SDSTS_CIR; | ||
909 | if (sd_status & VIA_CRDR_SDSTS_CMD_MASK) { | ||
910 | writew(sd_status & VIA_CRDR_SDSTS_CMD_MASK, | ||
911 | addrbase + VIA_CRDR_SDSTATUS); | ||
912 | via_sdc_cmd_isr(sdhost, sd_status & VIA_CRDR_SDSTS_CMD_MASK); | ||
913 | } | ||
914 | if (sd_status & VIA_CRDR_SDSTS_DATA_MASK) { | ||
915 | writew(sd_status & VIA_CRDR_SDSTS_DATA_MASK, | ||
916 | addrbase + VIA_CRDR_SDSTATUS); | ||
917 | via_sdc_data_isr(sdhost, sd_status & VIA_CRDR_SDSTS_DATA_MASK); | ||
918 | } | ||
919 | |||
920 | sd_status &= ~(VIA_CRDR_SDSTS_CMD_MASK | VIA_CRDR_SDSTS_DATA_MASK); | ||
921 | if (sd_status) { | ||
922 | pr_err("%s: Unexpected interrupt 0x%x\n", | ||
923 | mmc_hostname(sdhost->mmc), sd_status); | ||
924 | writew(sd_status, addrbase + VIA_CRDR_SDSTATUS); | ||
925 | } | ||
926 | |||
927 | result = IRQ_HANDLED; | ||
928 | |||
929 | mmiowb(); | ||
930 | out: | ||
931 | spin_unlock(&sdhost->lock); | ||
932 | |||
933 | return result; | ||
934 | } | ||
935 | |||
936 | static void via_sdc_timeout(unsigned long ulongdata) | ||
937 | { | ||
938 | struct via_crdr_mmc_host *sdhost; | ||
939 | unsigned long flags; | ||
940 | |||
941 | sdhost = (struct via_crdr_mmc_host *)ulongdata; | ||
942 | |||
943 | spin_lock_irqsave(&sdhost->lock, flags); | ||
944 | |||
945 | if (sdhost->mrq) { | ||
946 | pr_err("%s: Timeout waiting for hardware interrupt." | ||
947 | "cmd:0x%x\n", mmc_hostname(sdhost->mmc), | ||
948 | sdhost->mrq->cmd->opcode); | ||
949 | |||
950 | if (sdhost->data) { | ||
951 | writel(VIA_CRDR_DMACTRL_SFTRST, | ||
952 | sdhost->ddma_mmiobase + VIA_CRDR_DMACTRL); | ||
953 | sdhost->data->error = -ETIMEDOUT; | ||
954 | via_sdc_finish_data(sdhost); | ||
955 | } else { | ||
956 | if (sdhost->cmd) | ||
957 | sdhost->cmd->error = -ETIMEDOUT; | ||
958 | else | ||
959 | sdhost->mrq->cmd->error = -ETIMEDOUT; | ||
960 | tasklet_schedule(&sdhost->finish_tasklet); | ||
961 | } | ||
962 | } | ||
963 | |||
964 | mmiowb(); | ||
965 | spin_unlock_irqrestore(&sdhost->lock, flags); | ||
966 | } | ||
967 | |||
968 | static void via_sdc_tasklet_finish(unsigned long param) | ||
969 | { | ||
970 | struct via_crdr_mmc_host *host; | ||
971 | unsigned long flags; | ||
972 | struct mmc_request *mrq; | ||
973 | |||
974 | host = (struct via_crdr_mmc_host *)param; | ||
975 | |||
976 | spin_lock_irqsave(&host->lock, flags); | ||
977 | |||
978 | del_timer(&host->timer); | ||
979 | mrq = host->mrq; | ||
980 | host->mrq = NULL; | ||
981 | host->cmd = NULL; | ||
982 | host->data = NULL; | ||
983 | |||
984 | spin_unlock_irqrestore(&host->lock, flags); | ||
985 | |||
986 | mmc_request_done(host->mmc, mrq); | ||
987 | } | ||
988 | |||
989 | static void via_sdc_card_detect(struct work_struct *work) | ||
990 | { | ||
991 | struct via_crdr_mmc_host *host; | ||
992 | void __iomem *addrbase; | ||
993 | unsigned long flags; | ||
994 | u16 status; | ||
995 | |||
996 | host = container_of(work, struct via_crdr_mmc_host, carddet_work); | ||
997 | |||
998 | addrbase = host->ddma_mmiobase; | ||
999 | writel(VIA_CRDR_DMACTRL_SFTRST, addrbase + VIA_CRDR_DMACTRL); | ||
1000 | |||
1001 | spin_lock_irqsave(&host->lock, flags); | ||
1002 | |||
1003 | addrbase = host->pcictrl_mmiobase; | ||
1004 | writeb(VIA_CRDR_PCIDMACLK_SDC, addrbase + VIA_CRDR_PCIDMACLK); | ||
1005 | |||
1006 | addrbase = host->sdhc_mmiobase; | ||
1007 | status = readw(addrbase + VIA_CRDR_SDSTATUS); | ||
1008 | if (!(status & VIA_CRDR_SDSTS_SLOTG)) { | ||
1009 | if (host->mrq) { | ||
1010 | pr_err("%s: Card removed during transfer!\n", | ||
1011 | mmc_hostname(host->mmc)); | ||
1012 | host->mrq->cmd->error = -ENOMEDIUM; | ||
1013 | tasklet_schedule(&host->finish_tasklet); | ||
1014 | } | ||
1015 | |||
1016 | mmiowb(); | ||
1017 | spin_unlock_irqrestore(&host->lock, flags); | ||
1018 | |||
1019 | via_reset_pcictrl(host); | ||
1020 | |||
1021 | spin_lock_irqsave(&host->lock, flags); | ||
1022 | } | ||
1023 | |||
1024 | mmiowb(); | ||
1025 | spin_unlock_irqrestore(&host->lock, flags); | ||
1026 | |||
1027 | via_print_pcictrl(host); | ||
1028 | via_print_sdchc(host); | ||
1029 | |||
1030 | mmc_detect_change(host->mmc, msecs_to_jiffies(500)); | ||
1031 | } | ||
1032 | |||
1033 | static void via_init_mmc_host(struct via_crdr_mmc_host *host) | ||
1034 | { | ||
1035 | struct mmc_host *mmc = host->mmc; | ||
1036 | void __iomem *addrbase; | ||
1037 | u32 lenreg; | ||
1038 | u32 status; | ||
1039 | |||
1040 | init_timer(&host->timer); | ||
1041 | host->timer.data = (unsigned long)host; | ||
1042 | host->timer.function = via_sdc_timeout; | ||
1043 | |||
1044 | spin_lock_init(&host->lock); | ||
1045 | |||
1046 | mmc->f_min = VIA_CRDR_MIN_CLOCK; | ||
1047 | mmc->f_max = VIA_CRDR_MAX_CLOCK; | ||
1048 | mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195; | ||
1049 | mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SD_HIGHSPEED; | ||
1050 | mmc->ops = &via_sdc_ops; | ||
1051 | |||
1052 | /*Hardware cannot do scatter lists*/ | ||
1053 | mmc->max_hw_segs = 1; | ||
1054 | mmc->max_phys_segs = 1; | ||
1055 | |||
1056 | mmc->max_blk_size = VIA_CRDR_MAX_BLOCK_LENGTH; | ||
1057 | mmc->max_blk_count = VIA_CRDR_MAX_BLOCK_COUNT; | ||
1058 | |||
1059 | mmc->max_seg_size = mmc->max_blk_size * mmc->max_blk_count; | ||
1060 | mmc->max_req_size = mmc->max_seg_size; | ||
1061 | |||
1062 | INIT_WORK(&host->carddet_work, via_sdc_card_detect); | ||
1063 | |||
1064 | tasklet_init(&host->finish_tasklet, via_sdc_tasklet_finish, | ||
1065 | (unsigned long)host); | ||
1066 | |||
1067 | addrbase = host->sdhc_mmiobase; | ||
1068 | writel(0x0, addrbase + VIA_CRDR_SDINTMASK); | ||
1069 | msleep(1); | ||
1070 | |||
1071 | lenreg = VIA_CRDR_SDBLKLEN_GPIDET | VIA_CRDR_SDBLKLEN_INTEN; | ||
1072 | writel(lenreg, addrbase + VIA_CRDR_SDBLKLEN); | ||
1073 | |||
1074 | status = readw(addrbase + VIA_CRDR_SDSTATUS); | ||
1075 | status &= VIA_CRDR_SDSTS_W1C_MASK; | ||
1076 | writew(status, addrbase + VIA_CRDR_SDSTATUS); | ||
1077 | |||
1078 | status = readw(addrbase + VIA_CRDR_SDSTATUS2); | ||
1079 | status |= VIA_CRDR_SDSTS_CFE; | ||
1080 | writew(status, addrbase + VIA_CRDR_SDSTATUS2); | ||
1081 | |||
1082 | writeb(0x0, addrbase + VIA_CRDR_SDEXTCTRL); | ||
1083 | |||
1084 | writel(VIA_CRDR_SDACTIVE_INTMASK, addrbase + VIA_CRDR_SDINTMASK); | ||
1085 | msleep(1); | ||
1086 | } | ||
1087 | |||
1088 | static int __devinit via_sd_probe(struct pci_dev *pcidev, | ||
1089 | const struct pci_device_id *id) | ||
1090 | { | ||
1091 | struct mmc_host *mmc; | ||
1092 | struct via_crdr_mmc_host *sdhost; | ||
1093 | u32 base, len; | ||
1094 | u8 rev, gatt; | ||
1095 | int ret; | ||
1096 | |||
1097 | pci_read_config_byte(pcidev, PCI_CLASS_REVISION, &rev); | ||
1098 | pr_info(DRV_NAME | ||
1099 | ": VIA SDMMC controller found at %s [%04x:%04x] (rev %x)\n", | ||
1100 | pci_name(pcidev), (int)pcidev->vendor, (int)pcidev->device, | ||
1101 | (int)rev); | ||
1102 | |||
1103 | ret = pci_enable_device(pcidev); | ||
1104 | if (ret) | ||
1105 | return ret; | ||
1106 | |||
1107 | ret = pci_request_regions(pcidev, DRV_NAME); | ||
1108 | if (ret) | ||
1109 | goto disable; | ||
1110 | |||
1111 | pci_write_config_byte(pcidev, VIA_CRDR_PCI_WORK_MODE, 0); | ||
1112 | pci_write_config_byte(pcidev, VIA_CRDR_PCI_DBG_MODE, 0); | ||
1113 | |||
1114 | mmc = mmc_alloc_host(sizeof(struct via_crdr_mmc_host), &pcidev->dev); | ||
1115 | if (!mmc) { | ||
1116 | ret = -ENOMEM; | ||
1117 | goto release; | ||
1118 | } | ||
1119 | |||
1120 | sdhost = mmc_priv(mmc); | ||
1121 | sdhost->mmc = mmc; | ||
1122 | dev_set_drvdata(&pcidev->dev, sdhost); | ||
1123 | |||
1124 | len = pci_resource_len(pcidev, 0); | ||
1125 | base = pci_resource_start(pcidev, 0); | ||
1126 | sdhost->mmiobase = ioremap_nocache(base, len); | ||
1127 | if (!sdhost->mmiobase) { | ||
1128 | ret = -ENOMEM; | ||
1129 | goto free_mmc_host; | ||
1130 | } | ||
1131 | |||
1132 | sdhost->sdhc_mmiobase = | ||
1133 | sdhost->mmiobase + VIA_CRDR_SDC_OFF; | ||
1134 | sdhost->ddma_mmiobase = | ||
1135 | sdhost->mmiobase + VIA_CRDR_DDMA_OFF; | ||
1136 | sdhost->pcictrl_mmiobase = | ||
1137 | sdhost->mmiobase + VIA_CRDR_PCICTRL_OFF; | ||
1138 | |||
1139 | sdhost->power = MMC_VDD_165_195; | ||
1140 | |||
1141 | gatt = VIA_CRDR_PCICLKGATT_3V3 | VIA_CRDR_PCICLKGATT_PAD_PWRON; | ||
1142 | writeb(gatt, sdhost->pcictrl_mmiobase + VIA_CRDR_PCICLKGATT); | ||
1143 | via_pwron_sleep(sdhost); | ||
1144 | gatt |= VIA_CRDR_PCICLKGATT_SFTRST; | ||
1145 | writeb(gatt, sdhost->pcictrl_mmiobase + VIA_CRDR_PCICLKGATT); | ||
1146 | msleep(3); | ||
1147 | |||
1148 | via_init_mmc_host(sdhost); | ||
1149 | |||
1150 | ret = | ||
1151 | request_irq(pcidev->irq, via_sdc_isr, IRQF_SHARED, DRV_NAME, | ||
1152 | sdhost); | ||
1153 | if (ret) | ||
1154 | goto unmap; | ||
1155 | |||
1156 | writeb(VIA_CRDR_PCIINTCTRL_SDCIRQEN, | ||
1157 | sdhost->pcictrl_mmiobase + VIA_CRDR_PCIINTCTRL); | ||
1158 | writeb(VIA_CRDR_PCITMOCTRL_1024MS, | ||
1159 | sdhost->pcictrl_mmiobase + VIA_CRDR_PCITMOCTRL); | ||
1160 | |||
1161 | /* device-specific quirks */ | ||
1162 | if (pcidev->subsystem_vendor == PCI_VENDOR_ID_LENOVO && | ||
1163 | pcidev->subsystem_device == 0x3891) | ||
1164 | sdhost->quirks = VIA_CRDR_QUIRK_300MS_PWRDELAY; | ||
1165 | |||
1166 | mmc_add_host(mmc); | ||
1167 | |||
1168 | return 0; | ||
1169 | |||
1170 | unmap: | ||
1171 | iounmap(sdhost->mmiobase); | ||
1172 | free_mmc_host: | ||
1173 | dev_set_drvdata(&pcidev->dev, NULL); | ||
1174 | mmc_free_host(mmc); | ||
1175 | release: | ||
1176 | pci_release_regions(pcidev); | ||
1177 | disable: | ||
1178 | pci_disable_device(pcidev); | ||
1179 | |||
1180 | return ret; | ||
1181 | } | ||
1182 | |||
1183 | static void __devexit via_sd_remove(struct pci_dev *pcidev) | ||
1184 | { | ||
1185 | struct via_crdr_mmc_host *sdhost = pci_get_drvdata(pcidev); | ||
1186 | unsigned long flags; | ||
1187 | u8 gatt; | ||
1188 | |||
1189 | spin_lock_irqsave(&sdhost->lock, flags); | ||
1190 | |||
1191 | /* Ensure we don't accept more commands from mmc layer */ | ||
1192 | sdhost->reject = 1; | ||
1193 | |||
1194 | /* Disable generating further interrupts */ | ||
1195 | writeb(0x0, sdhost->pcictrl_mmiobase + VIA_CRDR_PCIINTCTRL); | ||
1196 | mmiowb(); | ||
1197 | |||
1198 | if (sdhost->mrq) { | ||
1199 | printk(KERN_ERR "%s: Controller removed during " | ||
1200 | "transfer\n", mmc_hostname(sdhost->mmc)); | ||
1201 | |||
1202 | /* make sure all DMA is stopped */ | ||
1203 | writel(VIA_CRDR_DMACTRL_SFTRST, | ||
1204 | sdhost->ddma_mmiobase + VIA_CRDR_DMACTRL); | ||
1205 | mmiowb(); | ||
1206 | sdhost->mrq->cmd->error = -ENOMEDIUM; | ||
1207 | if (sdhost->mrq->stop) | ||
1208 | sdhost->mrq->stop->error = -ENOMEDIUM; | ||
1209 | tasklet_schedule(&sdhost->finish_tasklet); | ||
1210 | } | ||
1211 | spin_unlock_irqrestore(&sdhost->lock, flags); | ||
1212 | |||
1213 | mmc_remove_host(sdhost->mmc); | ||
1214 | |||
1215 | free_irq(pcidev->irq, sdhost); | ||
1216 | |||
1217 | del_timer_sync(&sdhost->timer); | ||
1218 | |||
1219 | tasklet_kill(&sdhost->finish_tasklet); | ||
1220 | |||
1221 | /* switch off power */ | ||
1222 | gatt = readb(sdhost->pcictrl_mmiobase + VIA_CRDR_PCICLKGATT); | ||
1223 | gatt &= ~VIA_CRDR_PCICLKGATT_PAD_PWRON; | ||
1224 | writeb(gatt, sdhost->pcictrl_mmiobase + VIA_CRDR_PCICLKGATT); | ||
1225 | |||
1226 | iounmap(sdhost->mmiobase); | ||
1227 | dev_set_drvdata(&pcidev->dev, NULL); | ||
1228 | mmc_free_host(sdhost->mmc); | ||
1229 | pci_release_regions(pcidev); | ||
1230 | pci_disable_device(pcidev); | ||
1231 | |||
1232 | pr_info(DRV_NAME | ||
1233 | ": VIA SDMMC controller at %s [%04x:%04x] has been removed\n", | ||
1234 | pci_name(pcidev), (int)pcidev->vendor, (int)pcidev->device); | ||
1235 | } | ||
1236 | |||
1237 | #ifdef CONFIG_PM | ||
1238 | |||
1239 | static void via_init_sdc_pm(struct via_crdr_mmc_host *host) | ||
1240 | { | ||
1241 | struct sdhcreg *pm_sdhcreg; | ||
1242 | void __iomem *addrbase; | ||
1243 | u32 lenreg; | ||
1244 | u16 status; | ||
1245 | |||
1246 | pm_sdhcreg = &(host->pm_sdhc_reg); | ||
1247 | addrbase = host->sdhc_mmiobase; | ||
1248 | |||
1249 | writel(0x0, addrbase + VIA_CRDR_SDINTMASK); | ||
1250 | |||
1251 | lenreg = VIA_CRDR_SDBLKLEN_GPIDET | VIA_CRDR_SDBLKLEN_INTEN; | ||
1252 | writel(lenreg, addrbase + VIA_CRDR_SDBLKLEN); | ||
1253 | |||
1254 | status = readw(addrbase + VIA_CRDR_SDSTATUS); | ||
1255 | status &= VIA_CRDR_SDSTS_W1C_MASK; | ||
1256 | writew(status, addrbase + VIA_CRDR_SDSTATUS); | ||
1257 | |||
1258 | status = readw(addrbase + VIA_CRDR_SDSTATUS2); | ||
1259 | status |= VIA_CRDR_SDSTS_CFE; | ||
1260 | writew(status, addrbase + VIA_CRDR_SDSTATUS2); | ||
1261 | |||
1262 | writel(pm_sdhcreg->sdcontrol_reg, addrbase + VIA_CRDR_SDCTRL); | ||
1263 | writel(pm_sdhcreg->sdcmdarg_reg, addrbase + VIA_CRDR_SDCARG); | ||
1264 | writel(pm_sdhcreg->sdintmask_reg, addrbase + VIA_CRDR_SDINTMASK); | ||
1265 | writel(pm_sdhcreg->sdrsptmo_reg, addrbase + VIA_CRDR_SDRSPTMO); | ||
1266 | writel(pm_sdhcreg->sdclksel_reg, addrbase + VIA_CRDR_SDCLKSEL); | ||
1267 | writel(pm_sdhcreg->sdextctrl_reg, addrbase + VIA_CRDR_SDEXTCTRL); | ||
1268 | |||
1269 | via_print_pcictrl(host); | ||
1270 | via_print_sdchc(host); | ||
1271 | } | ||
1272 | |||
1273 | static int via_sd_suspend(struct pci_dev *pcidev, pm_message_t state) | ||
1274 | { | ||
1275 | struct via_crdr_mmc_host *host; | ||
1276 | int ret = 0; | ||
1277 | |||
1278 | host = pci_get_drvdata(pcidev); | ||
1279 | |||
1280 | via_save_pcictrlreg(host); | ||
1281 | via_save_sdcreg(host); | ||
1282 | |||
1283 | ret = mmc_suspend_host(host->mmc, state); | ||
1284 | |||
1285 | pci_save_state(pcidev); | ||
1286 | pci_enable_wake(pcidev, pci_choose_state(pcidev, state), 0); | ||
1287 | pci_disable_device(pcidev); | ||
1288 | pci_set_power_state(pcidev, pci_choose_state(pcidev, state)); | ||
1289 | |||
1290 | return ret; | ||
1291 | } | ||
1292 | |||
1293 | static int via_sd_resume(struct pci_dev *pcidev) | ||
1294 | { | ||
1295 | struct via_crdr_mmc_host *sdhost; | ||
1296 | int ret = 0; | ||
1297 | u8 gatt; | ||
1298 | |||
1299 | sdhost = pci_get_drvdata(pcidev); | ||
1300 | |||
1301 | gatt = VIA_CRDR_PCICLKGATT_PAD_PWRON; | ||
1302 | if (sdhost->power == MMC_VDD_165_195) | ||
1303 | gatt &= ~VIA_CRDR_PCICLKGATT_3V3; | ||
1304 | else | ||
1305 | gatt |= VIA_CRDR_PCICLKGATT_3V3; | ||
1306 | writeb(gatt, sdhost->pcictrl_mmiobase + VIA_CRDR_PCICLKGATT); | ||
1307 | via_pwron_sleep(sdhost); | ||
1308 | gatt |= VIA_CRDR_PCICLKGATT_SFTRST; | ||
1309 | writeb(gatt, sdhost->pcictrl_mmiobase + VIA_CRDR_PCICLKGATT); | ||
1310 | msleep(3); | ||
1311 | |||
1312 | msleep(100); | ||
1313 | |||
1314 | pci_set_power_state(pcidev, PCI_D0); | ||
1315 | pci_restore_state(pcidev); | ||
1316 | ret = pci_enable_device(pcidev); | ||
1317 | if (ret) | ||
1318 | return ret; | ||
1319 | |||
1320 | via_restore_pcictrlreg(sdhost); | ||
1321 | via_init_sdc_pm(sdhost); | ||
1322 | |||
1323 | ret = mmc_resume_host(sdhost->mmc); | ||
1324 | |||
1325 | return ret; | ||
1326 | } | ||
1327 | |||
1328 | #else /* CONFIG_PM */ | ||
1329 | |||
1330 | #define via_sd_suspend NULL | ||
1331 | #define via_sd_resume NULL | ||
1332 | |||
1333 | #endif /* CONFIG_PM */ | ||
1334 | |||
1335 | static struct pci_driver via_sd_driver = { | ||
1336 | .name = DRV_NAME, | ||
1337 | .id_table = via_ids, | ||
1338 | .probe = via_sd_probe, | ||
1339 | .remove = __devexit_p(via_sd_remove), | ||
1340 | .suspend = via_sd_suspend, | ||
1341 | .resume = via_sd_resume, | ||
1342 | }; | ||
1343 | |||
1344 | static int __init via_sd_drv_init(void) | ||
1345 | { | ||
1346 | pr_info(DRV_NAME ": VIA SD/MMC Card Reader driver " | ||
1347 | "(C) 2008 VIA Technologies, Inc.\n"); | ||
1348 | |||
1349 | return pci_register_driver(&via_sd_driver); | ||
1350 | } | ||
1351 | |||
1352 | static void __exit via_sd_drv_exit(void) | ||
1353 | { | ||
1354 | pci_unregister_driver(&via_sd_driver); | ||
1355 | } | ||
1356 | |||
1357 | module_init(via_sd_drv_init); | ||
1358 | module_exit(via_sd_drv_exit); | ||
1359 | |||
1360 | MODULE_LICENSE("GPL"); | ||
1361 | MODULE_AUTHOR("VIA Technologies Inc."); | ||
1362 | MODULE_DESCRIPTION("VIA SD/MMC Card Interface driver"); | ||