diff options
Diffstat (limited to 'drivers')
62 files changed, 673 insertions, 320 deletions
diff --git a/drivers/gpio/cs5535-gpio.c b/drivers/gpio/cs5535-gpio.c index e23c06893d19..599f6c9e0fbf 100644 --- a/drivers/gpio/cs5535-gpio.c +++ b/drivers/gpio/cs5535-gpio.c | |||
@@ -56,6 +56,18 @@ static struct cs5535_gpio_chip { | |||
56 | * registers, see include/linux/cs5535.h. | 56 | * registers, see include/linux/cs5535.h. |
57 | */ | 57 | */ |
58 | 58 | ||
59 | static void errata_outl(u32 val, unsigned long addr) | ||
60 | { | ||
61 | /* | ||
62 | * According to the CS5536 errata (#36), after suspend | ||
63 | * a write to the high bank GPIO register will clear all | ||
64 | * non-selected bits; the recommended workaround is a | ||
65 | * read-modify-write operation. | ||
66 | */ | ||
67 | val |= inl(addr); | ||
68 | outl(val, addr); | ||
69 | } | ||
70 | |||
59 | static void __cs5535_gpio_set(struct cs5535_gpio_chip *chip, unsigned offset, | 71 | static void __cs5535_gpio_set(struct cs5535_gpio_chip *chip, unsigned offset, |
60 | unsigned int reg) | 72 | unsigned int reg) |
61 | { | 73 | { |
@@ -64,7 +76,7 @@ static void __cs5535_gpio_set(struct cs5535_gpio_chip *chip, unsigned offset, | |||
64 | outl(1 << offset, chip->base + reg); | 76 | outl(1 << offset, chip->base + reg); |
65 | else | 77 | else |
66 | /* high bank register */ | 78 | /* high bank register */ |
67 | outl(1 << (offset - 16), chip->base + 0x80 + reg); | 79 | errata_outl(1 << (offset - 16), chip->base + 0x80 + reg); |
68 | } | 80 | } |
69 | 81 | ||
70 | void cs5535_gpio_set(unsigned offset, unsigned int reg) | 82 | void cs5535_gpio_set(unsigned offset, unsigned int reg) |
@@ -86,7 +98,7 @@ static void __cs5535_gpio_clear(struct cs5535_gpio_chip *chip, unsigned offset, | |||
86 | outl(1 << (offset + 16), chip->base + reg); | 98 | outl(1 << (offset + 16), chip->base + reg); |
87 | else | 99 | else |
88 | /* high bank register */ | 100 | /* high bank register */ |
89 | outl(1 << offset, chip->base + 0x80 + reg); | 101 | errata_outl(1 << offset, chip->base + 0x80 + reg); |
90 | } | 102 | } |
91 | 103 | ||
92 | void cs5535_gpio_clear(unsigned offset, unsigned int reg) | 104 | void cs5535_gpio_clear(unsigned offset, unsigned int reg) |
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 515345b11ac9..88cb04e7962b 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c | |||
@@ -1386,6 +1386,7 @@ static const struct hid_device_id hid_blacklist[] = { | |||
1386 | { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb651) }, | 1386 | { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb651) }, |
1387 | { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb653) }, | 1387 | { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb653) }, |
1388 | { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb654) }, | 1388 | { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb654) }, |
1389 | { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb65a) }, | ||
1389 | { HID_USB_DEVICE(USB_VENDOR_ID_TOPSEED, USB_DEVICE_ID_TOPSEED_CYBERLINK) }, | 1390 | { HID_USB_DEVICE(USB_VENDOR_ID_TOPSEED, USB_DEVICE_ID_TOPSEED_CYBERLINK) }, |
1390 | { HID_USB_DEVICE(USB_VENDOR_ID_TOPSEED2, USB_DEVICE_ID_TOPSEED2_RF_COMBO) }, | 1391 | { HID_USB_DEVICE(USB_VENDOR_ID_TOPSEED2, USB_DEVICE_ID_TOPSEED2_RF_COMBO) }, |
1391 | { HID_USB_DEVICE(USB_VENDOR_ID_TWINHAN, USB_DEVICE_ID_TWINHAN_IR_REMOTE) }, | 1392 | { HID_USB_DEVICE(USB_VENDOR_ID_TWINHAN, USB_DEVICE_ID_TWINHAN_IR_REMOTE) }, |
diff --git a/drivers/hid/hid-egalax.c b/drivers/hid/hid-egalax.c index 54b017ad258d..5a1b52e0eb85 100644 --- a/drivers/hid/hid-egalax.c +++ b/drivers/hid/hid-egalax.c | |||
@@ -221,7 +221,7 @@ static int egalax_probe(struct hid_device *hdev, const struct hid_device_id *id) | |||
221 | struct egalax_data *td; | 221 | struct egalax_data *td; |
222 | struct hid_report *report; | 222 | struct hid_report *report; |
223 | 223 | ||
224 | td = kmalloc(sizeof(struct egalax_data), GFP_KERNEL); | 224 | td = kzalloc(sizeof(struct egalax_data), GFP_KERNEL); |
225 | if (!td) { | 225 | if (!td) { |
226 | dev_err(&hdev->dev, "cannot allocate eGalax data\n"); | 226 | dev_err(&hdev->dev, "cannot allocate eGalax data\n"); |
227 | return -ENOMEM; | 227 | return -ENOMEM; |
diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c index bb0b3659437b..d8d372bae3cc 100644 --- a/drivers/hid/hid-input.c +++ b/drivers/hid/hid-input.c | |||
@@ -174,7 +174,7 @@ static int hidinput_setkeycode(struct input_dev *dev, | |||
174 | 174 | ||
175 | clear_bit(*old_keycode, dev->keybit); | 175 | clear_bit(*old_keycode, dev->keybit); |
176 | set_bit(usage->code, dev->keybit); | 176 | set_bit(usage->code, dev->keybit); |
177 | dbg_hid(KERN_DEBUG "Assigned keycode %d to HID usage code %x\n", | 177 | dbg_hid("Assigned keycode %d to HID usage code %x\n", |
178 | usage->code, usage->hid); | 178 | usage->code, usage->hid); |
179 | 179 | ||
180 | /* | 180 | /* |
@@ -203,8 +203,8 @@ static int hidinput_setkeycode(struct input_dev *dev, | |||
203 | * | 203 | * |
204 | * as seen in the HID specification v1.11 6.2.2.7 Global Items. | 204 | * as seen in the HID specification v1.11 6.2.2.7 Global Items. |
205 | * | 205 | * |
206 | * Only exponent 1 length units are processed. Centimeters are converted to | 206 | * Only exponent 1 length units are processed. Centimeters and inches are |
207 | * inches. Degrees are converted to radians. | 207 | * converted to millimeters. Degrees are converted to radians. |
208 | */ | 208 | */ |
209 | static __s32 hidinput_calc_abs_res(const struct hid_field *field, __u16 code) | 209 | static __s32 hidinput_calc_abs_res(const struct hid_field *field, __u16 code) |
210 | { | 210 | { |
@@ -225,13 +225,16 @@ static __s32 hidinput_calc_abs_res(const struct hid_field *field, __u16 code) | |||
225 | */ | 225 | */ |
226 | if (code == ABS_X || code == ABS_Y || code == ABS_Z) { | 226 | if (code == ABS_X || code == ABS_Y || code == ABS_Z) { |
227 | if (field->unit == 0x11) { /* If centimeters */ | 227 | if (field->unit == 0x11) { /* If centimeters */ |
228 | /* Convert to inches */ | 228 | /* Convert to millimeters */ |
229 | prev = logical_extents; | 229 | unit_exponent += 1; |
230 | logical_extents *= 254; | 230 | } else if (field->unit == 0x13) { /* If inches */ |
231 | if (logical_extents < prev) | 231 | /* Convert to millimeters */ |
232 | prev = physical_extents; | ||
233 | physical_extents *= 254; | ||
234 | if (physical_extents < prev) | ||
232 | return 0; | 235 | return 0; |
233 | unit_exponent += 2; | 236 | unit_exponent -= 1; |
234 | } else if (field->unit != 0x13) { /* If not inches */ | 237 | } else { |
235 | return 0; | 238 | return 0; |
236 | } | 239 | } |
237 | } else if (code == ABS_RX || code == ABS_RY || code == ABS_RZ) { | 240 | } else if (code == ABS_RX || code == ABS_RY || code == ABS_RZ) { |
diff --git a/drivers/hid/hid-tmff.c b/drivers/hid/hid-tmff.c index 15434c814793..25be4e1461bd 100644 --- a/drivers/hid/hid-tmff.c +++ b/drivers/hid/hid-tmff.c | |||
@@ -256,6 +256,8 @@ static const struct hid_device_id tm_devices[] = { | |||
256 | .driver_data = (unsigned long)ff_joystick }, | 256 | .driver_data = (unsigned long)ff_joystick }, |
257 | { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb654), /* FGT Force Feedback Wheel */ | 257 | { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb654), /* FGT Force Feedback Wheel */ |
258 | .driver_data = (unsigned long)ff_joystick }, | 258 | .driver_data = (unsigned long)ff_joystick }, |
259 | { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb65a), /* F430 Force Feedback Wheel */ | ||
260 | .driver_data = (unsigned long)ff_joystick }, | ||
259 | { } | 261 | { } |
260 | }; | 262 | }; |
261 | MODULE_DEVICE_TABLE(hid, tm_devices); | 263 | MODULE_DEVICE_TABLE(hid, tm_devices); |
diff --git a/drivers/infiniband/core/ud_header.c b/drivers/infiniband/core/ud_header.c index bb7e19280821..9b737ff133e2 100644 --- a/drivers/infiniband/core/ud_header.c +++ b/drivers/infiniband/core/ud_header.c | |||
@@ -278,36 +278,6 @@ void ib_ud_header_init(int payload_bytes, | |||
278 | EXPORT_SYMBOL(ib_ud_header_init); | 278 | EXPORT_SYMBOL(ib_ud_header_init); |
279 | 279 | ||
280 | /** | 280 | /** |
281 | * ib_lrh_header_pack - Pack LRH header struct into wire format | ||
282 | * @lrh:unpacked LRH header struct | ||
283 | * @buf:Buffer to pack into | ||
284 | * | ||
285 | * ib_lrh_header_pack() packs the LRH header structure @lrh into | ||
286 | * wire format in the buffer @buf. | ||
287 | */ | ||
288 | int ib_lrh_header_pack(struct ib_unpacked_lrh *lrh, void *buf) | ||
289 | { | ||
290 | ib_pack(lrh_table, ARRAY_SIZE(lrh_table), lrh, buf); | ||
291 | return 0; | ||
292 | } | ||
293 | EXPORT_SYMBOL(ib_lrh_header_pack); | ||
294 | |||
295 | /** | ||
296 | * ib_lrh_header_unpack - Unpack LRH structure from wire format | ||
297 | * @lrh:unpacked LRH header struct | ||
298 | * @buf:Buffer to pack into | ||
299 | * | ||
300 | * ib_lrh_header_unpack() unpacks the LRH header structure from | ||
301 | * wire format (in buf) into @lrh. | ||
302 | */ | ||
303 | int ib_lrh_header_unpack(void *buf, struct ib_unpacked_lrh *lrh) | ||
304 | { | ||
305 | ib_unpack(lrh_table, ARRAY_SIZE(lrh_table), buf, lrh); | ||
306 | return 0; | ||
307 | } | ||
308 | EXPORT_SYMBOL(ib_lrh_header_unpack); | ||
309 | |||
310 | /** | ||
311 | * ib_ud_header_pack - Pack UD header struct into wire format | 281 | * ib_ud_header_pack - Pack UD header struct into wire format |
312 | * @header:UD header struct | 282 | * @header:UD header struct |
313 | * @buf:Buffer to pack into | 283 | * @buf:Buffer to pack into |
diff --git a/drivers/infiniband/core/uverbs_marshall.c b/drivers/infiniband/core/uverbs_marshall.c index 5440da0e59b4..1b1146f87124 100644 --- a/drivers/infiniband/core/uverbs_marshall.c +++ b/drivers/infiniband/core/uverbs_marshall.c | |||
@@ -40,18 +40,21 @@ void ib_copy_ah_attr_to_user(struct ib_uverbs_ah_attr *dst, | |||
40 | dst->grh.sgid_index = src->grh.sgid_index; | 40 | dst->grh.sgid_index = src->grh.sgid_index; |
41 | dst->grh.hop_limit = src->grh.hop_limit; | 41 | dst->grh.hop_limit = src->grh.hop_limit; |
42 | dst->grh.traffic_class = src->grh.traffic_class; | 42 | dst->grh.traffic_class = src->grh.traffic_class; |
43 | memset(&dst->grh.reserved, 0, sizeof(dst->grh.reserved)); | ||
43 | dst->dlid = src->dlid; | 44 | dst->dlid = src->dlid; |
44 | dst->sl = src->sl; | 45 | dst->sl = src->sl; |
45 | dst->src_path_bits = src->src_path_bits; | 46 | dst->src_path_bits = src->src_path_bits; |
46 | dst->static_rate = src->static_rate; | 47 | dst->static_rate = src->static_rate; |
47 | dst->is_global = src->ah_flags & IB_AH_GRH ? 1 : 0; | 48 | dst->is_global = src->ah_flags & IB_AH_GRH ? 1 : 0; |
48 | dst->port_num = src->port_num; | 49 | dst->port_num = src->port_num; |
50 | dst->reserved = 0; | ||
49 | } | 51 | } |
50 | EXPORT_SYMBOL(ib_copy_ah_attr_to_user); | 52 | EXPORT_SYMBOL(ib_copy_ah_attr_to_user); |
51 | 53 | ||
52 | void ib_copy_qp_attr_to_user(struct ib_uverbs_qp_attr *dst, | 54 | void ib_copy_qp_attr_to_user(struct ib_uverbs_qp_attr *dst, |
53 | struct ib_qp_attr *src) | 55 | struct ib_qp_attr *src) |
54 | { | 56 | { |
57 | dst->qp_state = src->qp_state; | ||
55 | dst->cur_qp_state = src->cur_qp_state; | 58 | dst->cur_qp_state = src->cur_qp_state; |
56 | dst->path_mtu = src->path_mtu; | 59 | dst->path_mtu = src->path_mtu; |
57 | dst->path_mig_state = src->path_mig_state; | 60 | dst->path_mig_state = src->path_mig_state; |
@@ -83,6 +86,7 @@ void ib_copy_qp_attr_to_user(struct ib_uverbs_qp_attr *dst, | |||
83 | dst->rnr_retry = src->rnr_retry; | 86 | dst->rnr_retry = src->rnr_retry; |
84 | dst->alt_port_num = src->alt_port_num; | 87 | dst->alt_port_num = src->alt_port_num; |
85 | dst->alt_timeout = src->alt_timeout; | 88 | dst->alt_timeout = src->alt_timeout; |
89 | memset(dst->reserved, 0, sizeof(dst->reserved)); | ||
86 | } | 90 | } |
87 | EXPORT_SYMBOL(ib_copy_qp_attr_to_user); | 91 | EXPORT_SYMBOL(ib_copy_qp_attr_to_user); |
88 | 92 | ||
diff --git a/drivers/infiniband/hw/mlx4/main.c b/drivers/infiniband/hw/mlx4/main.c index bf3e20cd0298..30e09caf0da9 100644 --- a/drivers/infiniband/hw/mlx4/main.c +++ b/drivers/infiniband/hw/mlx4/main.c | |||
@@ -219,7 +219,7 @@ static int eth_link_query_port(struct ib_device *ibdev, u8 port, | |||
219 | struct net_device *ndev; | 219 | struct net_device *ndev; |
220 | enum ib_mtu tmp; | 220 | enum ib_mtu tmp; |
221 | 221 | ||
222 | props->active_width = IB_WIDTH_4X; | 222 | props->active_width = IB_WIDTH_1X; |
223 | props->active_speed = 4; | 223 | props->active_speed = 4; |
224 | props->port_cap_flags = IB_PORT_CM_SUP; | 224 | props->port_cap_flags = IB_PORT_CM_SUP; |
225 | props->gid_tbl_len = to_mdev(ibdev)->dev->caps.gid_table_len[port]; | 225 | props->gid_tbl_len = to_mdev(ibdev)->dev->caps.gid_table_len[port]; |
@@ -242,7 +242,7 @@ static int eth_link_query_port(struct ib_device *ibdev, u8 port, | |||
242 | tmp = iboe_get_mtu(ndev->mtu); | 242 | tmp = iboe_get_mtu(ndev->mtu); |
243 | props->active_mtu = tmp ? min(props->max_mtu, tmp) : IB_MTU_256; | 243 | props->active_mtu = tmp ? min(props->max_mtu, tmp) : IB_MTU_256; |
244 | 244 | ||
245 | props->state = netif_running(ndev) && netif_oper_up(ndev) ? | 245 | props->state = (netif_running(ndev) && netif_carrier_ok(ndev)) ? |
246 | IB_PORT_ACTIVE : IB_PORT_DOWN; | 246 | IB_PORT_ACTIVE : IB_PORT_DOWN; |
247 | props->phys_state = state_to_phys_state(props->state); | 247 | props->phys_state = state_to_phys_state(props->state); |
248 | 248 | ||
diff --git a/drivers/infiniband/hw/mlx4/qp.c b/drivers/infiniband/hw/mlx4/qp.c index 9a7794ac34c1..2001f20a4361 100644 --- a/drivers/infiniband/hw/mlx4/qp.c +++ b/drivers/infiniband/hw/mlx4/qp.c | |||
@@ -1816,6 +1816,11 @@ int mlx4_ib_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr, | |||
1816 | ctrl->fence_size = (wr->send_flags & IB_SEND_FENCE ? | 1816 | ctrl->fence_size = (wr->send_flags & IB_SEND_FENCE ? |
1817 | MLX4_WQE_CTRL_FENCE : 0) | size; | 1817 | MLX4_WQE_CTRL_FENCE : 0) | size; |
1818 | 1818 | ||
1819 | if (be16_to_cpu(vlan) < 0x1000) { | ||
1820 | ctrl->ins_vlan = 1 << 6; | ||
1821 | ctrl->vlan_tag = vlan; | ||
1822 | } | ||
1823 | |||
1819 | /* | 1824 | /* |
1820 | * Make sure descriptor is fully written before | 1825 | * Make sure descriptor is fully written before |
1821 | * setting ownership bit (because HW can start | 1826 | * setting ownership bit (because HW can start |
@@ -1831,11 +1836,6 @@ int mlx4_ib_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr, | |||
1831 | ctrl->owner_opcode = mlx4_ib_opcode[wr->opcode] | | 1836 | ctrl->owner_opcode = mlx4_ib_opcode[wr->opcode] | |
1832 | (ind & qp->sq.wqe_cnt ? cpu_to_be32(1 << 31) : 0) | blh; | 1837 | (ind & qp->sq.wqe_cnt ? cpu_to_be32(1 << 31) : 0) | blh; |
1833 | 1838 | ||
1834 | if (be16_to_cpu(vlan) < 0x1000) { | ||
1835 | ctrl->ins_vlan = 1 << 6; | ||
1836 | ctrl->vlan_tag = vlan; | ||
1837 | } | ||
1838 | |||
1839 | stamp = ind + qp->sq_spare_wqes; | 1839 | stamp = ind + qp->sq_spare_wqes; |
1840 | ind += DIV_ROUND_UP(size * 16, 1U << qp->sq.wqe_shift); | 1840 | ind += DIV_ROUND_UP(size * 16, 1U << qp->sq.wqe_shift); |
1841 | 1841 | ||
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index 77b8fd20cd90..6f190f4cdbc0 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig | |||
@@ -7,20 +7,20 @@ menuconfig NEW_LEDS | |||
7 | This is not related to standard keyboard LEDs which are controlled | 7 | This is not related to standard keyboard LEDs which are controlled |
8 | via the input system. | 8 | via the input system. |
9 | 9 | ||
10 | if NEW_LEDS | ||
11 | |||
12 | config LEDS_CLASS | 10 | config LEDS_CLASS |
13 | bool "LED Class Support" | 11 | bool "LED Class Support" |
12 | depends on NEW_LEDS | ||
14 | help | 13 | help |
15 | This option enables the led sysfs class in /sys/class/leds. You'll | 14 | This option enables the led sysfs class in /sys/class/leds. You'll |
16 | need this to do anything useful with LEDs. If unsure, say N. | 15 | need this to do anything useful with LEDs. If unsure, say N. |
17 | 16 | ||
18 | if LEDS_CLASS | 17 | if NEW_LEDS |
19 | 18 | ||
20 | comment "LED drivers" | 19 | comment "LED drivers" |
21 | 20 | ||
22 | config LEDS_88PM860X | 21 | config LEDS_88PM860X |
23 | tristate "LED Support for Marvell 88PM860x PMIC" | 22 | tristate "LED Support for Marvell 88PM860x PMIC" |
23 | depends on LEDS_CLASS | ||
24 | depends on MFD_88PM860X | 24 | depends on MFD_88PM860X |
25 | help | 25 | help |
26 | This option enables support for on-chip LED drivers found on Marvell | 26 | This option enables support for on-chip LED drivers found on Marvell |
@@ -28,6 +28,7 @@ config LEDS_88PM860X | |||
28 | 28 | ||
29 | config LEDS_ATMEL_PWM | 29 | config LEDS_ATMEL_PWM |
30 | tristate "LED Support using Atmel PWM outputs" | 30 | tristate "LED Support using Atmel PWM outputs" |
31 | depends on LEDS_CLASS | ||
31 | depends on ATMEL_PWM | 32 | depends on ATMEL_PWM |
32 | help | 33 | help |
33 | This option enables support for LEDs driven using outputs | 34 | This option enables support for LEDs driven using outputs |
@@ -35,6 +36,7 @@ config LEDS_ATMEL_PWM | |||
35 | 36 | ||
36 | config LEDS_LOCOMO | 37 | config LEDS_LOCOMO |
37 | tristate "LED Support for Locomo device" | 38 | tristate "LED Support for Locomo device" |
39 | depends on LEDS_CLASS | ||
38 | depends on SHARP_LOCOMO | 40 | depends on SHARP_LOCOMO |
39 | help | 41 | help |
40 | This option enables support for the LEDs on Sharp Locomo. | 42 | This option enables support for the LEDs on Sharp Locomo. |
@@ -42,6 +44,7 @@ config LEDS_LOCOMO | |||
42 | 44 | ||
43 | config LEDS_MIKROTIK_RB532 | 45 | config LEDS_MIKROTIK_RB532 |
44 | tristate "LED Support for Mikrotik Routerboard 532" | 46 | tristate "LED Support for Mikrotik Routerboard 532" |
47 | depends on LEDS_CLASS | ||
45 | depends on MIKROTIK_RB532 | 48 | depends on MIKROTIK_RB532 |
46 | help | 49 | help |
47 | This option enables support for the so called "User LED" of | 50 | This option enables support for the so called "User LED" of |
@@ -49,6 +52,7 @@ config LEDS_MIKROTIK_RB532 | |||
49 | 52 | ||
50 | config LEDS_S3C24XX | 53 | config LEDS_S3C24XX |
51 | tristate "LED Support for Samsung S3C24XX GPIO LEDs" | 54 | tristate "LED Support for Samsung S3C24XX GPIO LEDs" |
55 | depends on LEDS_CLASS | ||
52 | depends on ARCH_S3C2410 | 56 | depends on ARCH_S3C2410 |
53 | help | 57 | help |
54 | This option enables support for LEDs connected to GPIO lines | 58 | This option enables support for LEDs connected to GPIO lines |
@@ -56,12 +60,14 @@ config LEDS_S3C24XX | |||
56 | 60 | ||
57 | config LEDS_AMS_DELTA | 61 | config LEDS_AMS_DELTA |
58 | tristate "LED Support for the Amstrad Delta (E3)" | 62 | tristate "LED Support for the Amstrad Delta (E3)" |
63 | depends on LEDS_CLASS | ||
59 | depends on MACH_AMS_DELTA | 64 | depends on MACH_AMS_DELTA |
60 | help | 65 | help |
61 | This option enables support for the LEDs on Amstrad Delta (E3). | 66 | This option enables support for the LEDs on Amstrad Delta (E3). |
62 | 67 | ||
63 | config LEDS_NET48XX | 68 | config LEDS_NET48XX |
64 | tristate "LED Support for Soekris net48xx series Error LED" | 69 | tristate "LED Support for Soekris net48xx series Error LED" |
70 | depends on LEDS_CLASS | ||
65 | depends on SCx200_GPIO | 71 | depends on SCx200_GPIO |
66 | help | 72 | help |
67 | This option enables support for the Soekris net4801 and net4826 error | 73 | This option enables support for the Soekris net4801 and net4826 error |
@@ -79,18 +85,21 @@ config LEDS_NET5501 | |||
79 | 85 | ||
80 | config LEDS_FSG | 86 | config LEDS_FSG |
81 | tristate "LED Support for the Freecom FSG-3" | 87 | tristate "LED Support for the Freecom FSG-3" |
88 | depends on LEDS_CLASS | ||
82 | depends on MACH_FSG | 89 | depends on MACH_FSG |
83 | help | 90 | help |
84 | This option enables support for the LEDs on the Freecom FSG-3. | 91 | This option enables support for the LEDs on the Freecom FSG-3. |
85 | 92 | ||
86 | config LEDS_WRAP | 93 | config LEDS_WRAP |
87 | tristate "LED Support for the WRAP series LEDs" | 94 | tristate "LED Support for the WRAP series LEDs" |
95 | depends on LEDS_CLASS | ||
88 | depends on SCx200_GPIO | 96 | depends on SCx200_GPIO |
89 | help | 97 | help |
90 | This option enables support for the PCEngines WRAP programmable LEDs. | 98 | This option enables support for the PCEngines WRAP programmable LEDs. |
91 | 99 | ||
92 | config LEDS_ALIX2 | 100 | config LEDS_ALIX2 |
93 | tristate "LED Support for ALIX.2 and ALIX.3 series" | 101 | tristate "LED Support for ALIX.2 and ALIX.3 series" |
102 | depends on LEDS_CLASS | ||
94 | depends on X86 && !GPIO_CS5535 && !CS5535_GPIO | 103 | depends on X86 && !GPIO_CS5535 && !CS5535_GPIO |
95 | help | 104 | help |
96 | This option enables support for the PCEngines ALIX.2 and ALIX.3 LEDs. | 105 | This option enables support for the PCEngines ALIX.2 and ALIX.3 LEDs. |
@@ -98,12 +107,14 @@ config LEDS_ALIX2 | |||
98 | 107 | ||
99 | config LEDS_H1940 | 108 | config LEDS_H1940 |
100 | tristate "LED Support for iPAQ H1940 device" | 109 | tristate "LED Support for iPAQ H1940 device" |
110 | depends on LEDS_CLASS | ||
101 | depends on ARCH_H1940 | 111 | depends on ARCH_H1940 |
102 | help | 112 | help |
103 | This option enables support for the LEDs on the h1940. | 113 | This option enables support for the LEDs on the h1940. |
104 | 114 | ||
105 | config LEDS_COBALT_QUBE | 115 | config LEDS_COBALT_QUBE |
106 | tristate "LED Support for the Cobalt Qube series front LED" | 116 | tristate "LED Support for the Cobalt Qube series front LED" |
117 | depends on LEDS_CLASS | ||
107 | depends on MIPS_COBALT | 118 | depends on MIPS_COBALT |
108 | help | 119 | help |
109 | This option enables support for the front LED on Cobalt Qube series | 120 | This option enables support for the front LED on Cobalt Qube series |
@@ -117,6 +128,7 @@ config LEDS_COBALT_RAQ | |||
117 | 128 | ||
118 | config LEDS_SUNFIRE | 129 | config LEDS_SUNFIRE |
119 | tristate "LED support for SunFire servers." | 130 | tristate "LED support for SunFire servers." |
131 | depends on LEDS_CLASS | ||
120 | depends on SPARC64 | 132 | depends on SPARC64 |
121 | select LEDS_TRIGGERS | 133 | select LEDS_TRIGGERS |
122 | help | 134 | help |
@@ -125,6 +137,7 @@ config LEDS_SUNFIRE | |||
125 | 137 | ||
126 | config LEDS_HP6XX | 138 | config LEDS_HP6XX |
127 | tristate "LED Support for the HP Jornada 6xx" | 139 | tristate "LED Support for the HP Jornada 6xx" |
140 | depends on LEDS_CLASS | ||
128 | depends on SH_HP6XX | 141 | depends on SH_HP6XX |
129 | help | 142 | help |
130 | This option enables LED support for the handheld | 143 | This option enables LED support for the handheld |
@@ -132,6 +145,7 @@ config LEDS_HP6XX | |||
132 | 145 | ||
133 | config LEDS_PCA9532 | 146 | config LEDS_PCA9532 |
134 | tristate "LED driver for PCA9532 dimmer" | 147 | tristate "LED driver for PCA9532 dimmer" |
148 | depends on LEDS_CLASS | ||
135 | depends on I2C && INPUT && EXPERIMENTAL | 149 | depends on I2C && INPUT && EXPERIMENTAL |
136 | help | 150 | help |
137 | This option enables support for NXP pca9532 | 151 | This option enables support for NXP pca9532 |
@@ -140,6 +154,7 @@ config LEDS_PCA9532 | |||
140 | 154 | ||
141 | config LEDS_GPIO | 155 | config LEDS_GPIO |
142 | tristate "LED Support for GPIO connected LEDs" | 156 | tristate "LED Support for GPIO connected LEDs" |
157 | depends on LEDS_CLASS | ||
143 | depends on GENERIC_GPIO | 158 | depends on GENERIC_GPIO |
144 | help | 159 | help |
145 | This option enables support for the LEDs connected to GPIO | 160 | This option enables support for the LEDs connected to GPIO |
@@ -167,6 +182,7 @@ config LEDS_GPIO_OF | |||
167 | 182 | ||
168 | config LEDS_LP3944 | 183 | config LEDS_LP3944 |
169 | tristate "LED Support for N.S. LP3944 (Fun Light) I2C chip" | 184 | tristate "LED Support for N.S. LP3944 (Fun Light) I2C chip" |
185 | depends on LEDS_CLASS | ||
170 | depends on I2C | 186 | depends on I2C |
171 | help | 187 | help |
172 | This option enables support for LEDs connected to the National | 188 | This option enables support for LEDs connected to the National |
@@ -196,6 +212,7 @@ config LEDS_LP5523 | |||
196 | 212 | ||
197 | config LEDS_CLEVO_MAIL | 213 | config LEDS_CLEVO_MAIL |
198 | tristate "Mail LED on Clevo notebook" | 214 | tristate "Mail LED on Clevo notebook" |
215 | depends on LEDS_CLASS | ||
199 | depends on X86 && SERIO_I8042 && DMI | 216 | depends on X86 && SERIO_I8042 && DMI |
200 | help | 217 | help |
201 | This driver makes the mail LED accessible from userspace | 218 | This driver makes the mail LED accessible from userspace |
@@ -226,6 +243,7 @@ config LEDS_CLEVO_MAIL | |||
226 | 243 | ||
227 | config LEDS_PCA955X | 244 | config LEDS_PCA955X |
228 | tristate "LED Support for PCA955x I2C chips" | 245 | tristate "LED Support for PCA955x I2C chips" |
246 | depends on LEDS_CLASS | ||
229 | depends on I2C | 247 | depends on I2C |
230 | help | 248 | help |
231 | This option enables support for LEDs connected to PCA955x | 249 | This option enables support for LEDs connected to PCA955x |
@@ -234,6 +252,7 @@ config LEDS_PCA955X | |||
234 | 252 | ||
235 | config LEDS_WM831X_STATUS | 253 | config LEDS_WM831X_STATUS |
236 | tristate "LED support for status LEDs on WM831x PMICs" | 254 | tristate "LED support for status LEDs on WM831x PMICs" |
255 | depends on LEDS_CLASS | ||
237 | depends on MFD_WM831X | 256 | depends on MFD_WM831X |
238 | help | 257 | help |
239 | This option enables support for the status LEDs of the WM831x | 258 | This option enables support for the status LEDs of the WM831x |
@@ -241,6 +260,7 @@ config LEDS_WM831X_STATUS | |||
241 | 260 | ||
242 | config LEDS_WM8350 | 261 | config LEDS_WM8350 |
243 | tristate "LED Support for WM8350 AudioPlus PMIC" | 262 | tristate "LED Support for WM8350 AudioPlus PMIC" |
263 | depends on LEDS_CLASS | ||
244 | depends on MFD_WM8350 | 264 | depends on MFD_WM8350 |
245 | help | 265 | help |
246 | This option enables support for LEDs driven by the Wolfson | 266 | This option enables support for LEDs driven by the Wolfson |
@@ -248,6 +268,7 @@ config LEDS_WM8350 | |||
248 | 268 | ||
249 | config LEDS_DA903X | 269 | config LEDS_DA903X |
250 | tristate "LED Support for DA9030/DA9034 PMIC" | 270 | tristate "LED Support for DA9030/DA9034 PMIC" |
271 | depends on LEDS_CLASS | ||
251 | depends on PMIC_DA903X | 272 | depends on PMIC_DA903X |
252 | help | 273 | help |
253 | This option enables support for on-chip LED drivers found | 274 | This option enables support for on-chip LED drivers found |
@@ -255,6 +276,7 @@ config LEDS_DA903X | |||
255 | 276 | ||
256 | config LEDS_DAC124S085 | 277 | config LEDS_DAC124S085 |
257 | tristate "LED Support for DAC124S085 SPI DAC" | 278 | tristate "LED Support for DAC124S085 SPI DAC" |
279 | depends on LEDS_CLASS | ||
258 | depends on SPI | 280 | depends on SPI |
259 | help | 281 | help |
260 | This option enables support for DAC124S085 SPI DAC from NatSemi, | 282 | This option enables support for DAC124S085 SPI DAC from NatSemi, |
@@ -262,18 +284,21 @@ config LEDS_DAC124S085 | |||
262 | 284 | ||
263 | config LEDS_PWM | 285 | config LEDS_PWM |
264 | tristate "PWM driven LED Support" | 286 | tristate "PWM driven LED Support" |
287 | depends on LEDS_CLASS | ||
265 | depends on HAVE_PWM | 288 | depends on HAVE_PWM |
266 | help | 289 | help |
267 | This option enables support for pwm driven LEDs | 290 | This option enables support for pwm driven LEDs |
268 | 291 | ||
269 | config LEDS_REGULATOR | 292 | config LEDS_REGULATOR |
270 | tristate "REGULATOR driven LED support" | 293 | tristate "REGULATOR driven LED support" |
294 | depends on LEDS_CLASS | ||
271 | depends on REGULATOR | 295 | depends on REGULATOR |
272 | help | 296 | help |
273 | This option enables support for regulator driven LEDs. | 297 | This option enables support for regulator driven LEDs. |
274 | 298 | ||
275 | config LEDS_BD2802 | 299 | config LEDS_BD2802 |
276 | tristate "LED driver for BD2802 RGB LED" | 300 | tristate "LED driver for BD2802 RGB LED" |
301 | depends on LEDS_CLASS | ||
277 | depends on I2C | 302 | depends on I2C |
278 | help | 303 | help |
279 | This option enables support for BD2802GU RGB LED driver chips | 304 | This option enables support for BD2802GU RGB LED driver chips |
@@ -281,6 +306,7 @@ config LEDS_BD2802 | |||
281 | 306 | ||
282 | config LEDS_INTEL_SS4200 | 307 | config LEDS_INTEL_SS4200 |
283 | tristate "LED driver for Intel NAS SS4200 series" | 308 | tristate "LED driver for Intel NAS SS4200 series" |
309 | depends on LEDS_CLASS | ||
284 | depends on PCI && DMI | 310 | depends on PCI && DMI |
285 | help | 311 | help |
286 | This option enables support for the Intel SS4200 series of | 312 | This option enables support for the Intel SS4200 series of |
@@ -290,6 +316,7 @@ config LEDS_INTEL_SS4200 | |||
290 | 316 | ||
291 | config LEDS_LT3593 | 317 | config LEDS_LT3593 |
292 | tristate "LED driver for LT3593 controllers" | 318 | tristate "LED driver for LT3593 controllers" |
319 | depends on LEDS_CLASS | ||
293 | depends on GENERIC_GPIO | 320 | depends on GENERIC_GPIO |
294 | help | 321 | help |
295 | This option enables support for LEDs driven by a Linear Technology | 322 | This option enables support for LEDs driven by a Linear Technology |
@@ -298,6 +325,7 @@ config LEDS_LT3593 | |||
298 | 325 | ||
299 | config LEDS_ADP5520 | 326 | config LEDS_ADP5520 |
300 | tristate "LED Support for ADP5520/ADP5501 PMIC" | 327 | tristate "LED Support for ADP5520/ADP5501 PMIC" |
328 | depends on LEDS_CLASS | ||
301 | depends on PMIC_ADP5520 | 329 | depends on PMIC_ADP5520 |
302 | help | 330 | help |
303 | This option enables support for on-chip LED drivers found | 331 | This option enables support for on-chip LED drivers found |
@@ -308,6 +336,7 @@ config LEDS_ADP5520 | |||
308 | 336 | ||
309 | config LEDS_DELL_NETBOOKS | 337 | config LEDS_DELL_NETBOOKS |
310 | tristate "External LED on Dell Business Netbooks" | 338 | tristate "External LED on Dell Business Netbooks" |
339 | depends on LEDS_CLASS | ||
311 | depends on X86 && ACPI_WMI | 340 | depends on X86 && ACPI_WMI |
312 | help | 341 | help |
313 | This adds support for the Latitude 2100 and similar | 342 | This adds support for the Latitude 2100 and similar |
@@ -315,6 +344,7 @@ config LEDS_DELL_NETBOOKS | |||
315 | 344 | ||
316 | config LEDS_MC13783 | 345 | config LEDS_MC13783 |
317 | tristate "LED Support for MC13783 PMIC" | 346 | tristate "LED Support for MC13783 PMIC" |
347 | depends on LEDS_CLASS | ||
318 | depends on MFD_MC13783 | 348 | depends on MFD_MC13783 |
319 | help | 349 | help |
320 | This option enable support for on-chip LED drivers found | 350 | This option enable support for on-chip LED drivers found |
@@ -322,6 +352,7 @@ config LEDS_MC13783 | |||
322 | 352 | ||
323 | config LEDS_NS2 | 353 | config LEDS_NS2 |
324 | tristate "LED support for Network Space v2 GPIO LEDs" | 354 | tristate "LED support for Network Space v2 GPIO LEDs" |
355 | depends on LEDS_CLASS | ||
325 | depends on MACH_NETSPACE_V2 || MACH_INETSPACE_V2 || MACH_NETSPACE_MAX_V2 || D2NET_V2 | 356 | depends on MACH_NETSPACE_V2 || MACH_INETSPACE_V2 || MACH_NETSPACE_MAX_V2 || D2NET_V2 |
326 | default y | 357 | default y |
327 | help | 358 | help |
@@ -340,17 +371,17 @@ config LEDS_NETXBIG | |||
340 | 371 | ||
341 | config LEDS_TRIGGERS | 372 | config LEDS_TRIGGERS |
342 | bool "LED Trigger support" | 373 | bool "LED Trigger support" |
374 | depends on LEDS_CLASS | ||
343 | help | 375 | help |
344 | This option enables trigger support for the leds class. | 376 | This option enables trigger support for the leds class. |
345 | These triggers allow kernel events to drive the LEDs and can | 377 | These triggers allow kernel events to drive the LEDs and can |
346 | be configured via sysfs. If unsure, say Y. | 378 | be configured via sysfs. If unsure, say Y. |
347 | 379 | ||
348 | if LEDS_TRIGGERS | ||
349 | |||
350 | comment "LED Triggers" | 380 | comment "LED Triggers" |
351 | 381 | ||
352 | config LEDS_TRIGGER_TIMER | 382 | config LEDS_TRIGGER_TIMER |
353 | tristate "LED Timer Trigger" | 383 | tristate "LED Timer Trigger" |
384 | depends on LEDS_TRIGGERS | ||
354 | help | 385 | help |
355 | This allows LEDs to be controlled by a programmable timer | 386 | This allows LEDs to be controlled by a programmable timer |
356 | via sysfs. Some LED hardware can be programmed to start | 387 | via sysfs. Some LED hardware can be programmed to start |
@@ -362,12 +393,14 @@ config LEDS_TRIGGER_TIMER | |||
362 | config LEDS_TRIGGER_IDE_DISK | 393 | config LEDS_TRIGGER_IDE_DISK |
363 | bool "LED IDE Disk Trigger" | 394 | bool "LED IDE Disk Trigger" |
364 | depends on IDE_GD_ATA | 395 | depends on IDE_GD_ATA |
396 | depends on LEDS_TRIGGERS | ||
365 | help | 397 | help |
366 | This allows LEDs to be controlled by IDE disk activity. | 398 | This allows LEDs to be controlled by IDE disk activity. |
367 | If unsure, say Y. | 399 | If unsure, say Y. |
368 | 400 | ||
369 | config LEDS_TRIGGER_HEARTBEAT | 401 | config LEDS_TRIGGER_HEARTBEAT |
370 | tristate "LED Heartbeat Trigger" | 402 | tristate "LED Heartbeat Trigger" |
403 | depends on LEDS_TRIGGERS | ||
371 | help | 404 | help |
372 | This allows LEDs to be controlled by a CPU load average. | 405 | This allows LEDs to be controlled by a CPU load average. |
373 | The flash frequency is a hyperbolic function of the 1-minute | 406 | The flash frequency is a hyperbolic function of the 1-minute |
@@ -376,6 +409,7 @@ config LEDS_TRIGGER_HEARTBEAT | |||
376 | 409 | ||
377 | config LEDS_TRIGGER_BACKLIGHT | 410 | config LEDS_TRIGGER_BACKLIGHT |
378 | tristate "LED backlight Trigger" | 411 | tristate "LED backlight Trigger" |
412 | depends on LEDS_TRIGGERS | ||
379 | help | 413 | help |
380 | This allows LEDs to be controlled as a backlight device: they | 414 | This allows LEDs to be controlled as a backlight device: they |
381 | turn off and on when the display is blanked and unblanked. | 415 | turn off and on when the display is blanked and unblanked. |
@@ -384,6 +418,7 @@ config LEDS_TRIGGER_BACKLIGHT | |||
384 | 418 | ||
385 | config LEDS_TRIGGER_GPIO | 419 | config LEDS_TRIGGER_GPIO |
386 | tristate "LED GPIO Trigger" | 420 | tristate "LED GPIO Trigger" |
421 | depends on LEDS_TRIGGERS | ||
387 | depends on GPIOLIB | 422 | depends on GPIOLIB |
388 | help | 423 | help |
389 | This allows LEDs to be controlled by gpio events. It's good | 424 | This allows LEDs to be controlled by gpio events. It's good |
@@ -396,6 +431,7 @@ config LEDS_TRIGGER_GPIO | |||
396 | 431 | ||
397 | config LEDS_TRIGGER_DEFAULT_ON | 432 | config LEDS_TRIGGER_DEFAULT_ON |
398 | tristate "LED Default ON Trigger" | 433 | tristate "LED Default ON Trigger" |
434 | depends on LEDS_TRIGGERS | ||
399 | help | 435 | help |
400 | This allows LEDs to be initialised in the ON state. | 436 | This allows LEDs to be initialised in the ON state. |
401 | If unsure, say Y. | 437 | If unsure, say Y. |
@@ -403,8 +439,4 @@ config LEDS_TRIGGER_DEFAULT_ON | |||
403 | comment "iptables trigger is under Netfilter config (LED target)" | 439 | comment "iptables trigger is under Netfilter config (LED target)" |
404 | depends on LEDS_TRIGGERS | 440 | depends on LEDS_TRIGGERS |
405 | 441 | ||
406 | endif # LEDS_TRIGGERS | ||
407 | |||
408 | endif # LEDS_CLASS | ||
409 | |||
410 | endif # NEW_LEDS | 442 | endif # NEW_LEDS |
diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig index 3d7355ff7308..fa51af11c6f1 100644 --- a/drivers/macintosh/Kconfig +++ b/drivers/macintosh/Kconfig | |||
@@ -102,6 +102,7 @@ config ADB_PMU_LED | |||
102 | config ADB_PMU_LED_IDE | 102 | config ADB_PMU_LED_IDE |
103 | bool "Use front LED as IDE LED by default" | 103 | bool "Use front LED as IDE LED by default" |
104 | depends on ADB_PMU_LED | 104 | depends on ADB_PMU_LED |
105 | depends on LEDS_CLASS | ||
105 | select LEDS_TRIGGERS | 106 | select LEDS_TRIGGERS |
106 | select LEDS_TRIGGER_IDE_DISK | 107 | select LEDS_TRIGGER_IDE_DISK |
107 | help | 108 | help |
diff --git a/drivers/net/mlx4/fw.c b/drivers/net/mlx4/fw.c index b68eee2414c2..7a7e18ba278a 100644 --- a/drivers/net/mlx4/fw.c +++ b/drivers/net/mlx4/fw.c | |||
@@ -289,6 +289,10 @@ int mlx4_QUERY_DEV_CAP(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap) | |||
289 | MLX4_GET(field, outbox, QUERY_DEV_CAP_LOG_BF_REG_SZ_OFFSET); | 289 | MLX4_GET(field, outbox, QUERY_DEV_CAP_LOG_BF_REG_SZ_OFFSET); |
290 | dev_cap->bf_reg_size = 1 << (field & 0x1f); | 290 | dev_cap->bf_reg_size = 1 << (field & 0x1f); |
291 | MLX4_GET(field, outbox, QUERY_DEV_CAP_LOG_MAX_BF_REGS_PER_PAGE_OFFSET); | 291 | MLX4_GET(field, outbox, QUERY_DEV_CAP_LOG_MAX_BF_REGS_PER_PAGE_OFFSET); |
292 | if ((1 << (field & 0x3f)) > (PAGE_SIZE / dev_cap->bf_reg_size)) { | ||
293 | mlx4_warn(dev, "firmware bug: log2 # of blue flame regs is invalid (%d), forcing 3\n", field & 0x1f); | ||
294 | field = 3; | ||
295 | } | ||
292 | dev_cap->bf_regs_per_page = 1 << (field & 0x3f); | 296 | dev_cap->bf_regs_per_page = 1 << (field & 0x3f); |
293 | mlx4_dbg(dev, "BlueFlame available (reg size %d, regs/page %d)\n", | 297 | mlx4_dbg(dev, "BlueFlame available (reg size %d, regs/page %d)\n", |
294 | dev_cap->bf_reg_size, dev_cap->bf_regs_per_page); | 298 | dev_cap->bf_reg_size, dev_cap->bf_regs_per_page); |
diff --git a/drivers/net/wan/x25_asy.c b/drivers/net/wan/x25_asy.c index cf05504d9511..24297b274cd4 100644 --- a/drivers/net/wan/x25_asy.c +++ b/drivers/net/wan/x25_asy.c | |||
@@ -577,7 +577,7 @@ static int x25_asy_open_tty(struct tty_struct *tty) | |||
577 | if (err) | 577 | if (err) |
578 | return err; | 578 | return err; |
579 | /* Done. We have linked the TTY line to a channel. */ | 579 | /* Done. We have linked the TTY line to a channel. */ |
580 | return sl->dev->base_addr; | 580 | return 0; |
581 | } | 581 | } |
582 | 582 | ||
583 | 583 | ||
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index 4d8e14b7aa93..09a550860dcf 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c | |||
@@ -2872,7 +2872,7 @@ static struct console serial8250_console = { | |||
2872 | .device = uart_console_device, | 2872 | .device = uart_console_device, |
2873 | .setup = serial8250_console_setup, | 2873 | .setup = serial8250_console_setup, |
2874 | .early_setup = serial8250_console_early_setup, | 2874 | .early_setup = serial8250_console_early_setup, |
2875 | .flags = CON_PRINTBUFFER, | 2875 | .flags = CON_PRINTBUFFER | CON_ANYTIME, |
2876 | .index = -1, | 2876 | .index = -1, |
2877 | .data = &serial8250_reg, | 2877 | .data = &serial8250_reg, |
2878 | }; | 2878 | }; |
diff --git a/drivers/serial/mfd.c b/drivers/serial/mfd.c index 5fc699e929dc..d40010a22ecd 100644 --- a/drivers/serial/mfd.c +++ b/drivers/serial/mfd.c | |||
@@ -900,8 +900,7 @@ serial_hsu_set_termios(struct uart_port *port, struct ktermios *termios, | |||
900 | unsigned char cval, fcr = 0; | 900 | unsigned char cval, fcr = 0; |
901 | unsigned long flags; | 901 | unsigned long flags; |
902 | unsigned int baud, quot; | 902 | unsigned int baud, quot; |
903 | u32 mul = 0x3600; | 903 | u32 ps, mul; |
904 | u32 ps = 0x10; | ||
905 | 904 | ||
906 | switch (termios->c_cflag & CSIZE) { | 905 | switch (termios->c_cflag & CSIZE) { |
907 | case CS5: | 906 | case CS5: |
@@ -943,31 +942,24 @@ serial_hsu_set_termios(struct uart_port *port, struct ktermios *termios, | |||
943 | baud = uart_get_baud_rate(port, termios, old, 0, 4000000); | 942 | baud = uart_get_baud_rate(port, termios, old, 0, 4000000); |
944 | 943 | ||
945 | quot = 1; | 944 | quot = 1; |
945 | ps = 0x10; | ||
946 | mul = 0x3600; | ||
946 | switch (baud) { | 947 | switch (baud) { |
947 | case 3500000: | 948 | case 3500000: |
948 | mul = 0x3345; | 949 | mul = 0x3345; |
949 | ps = 0xC; | 950 | ps = 0xC; |
950 | break; | 951 | break; |
951 | case 3000000: | ||
952 | mul = 0x2EE0; | ||
953 | break; | ||
954 | case 2500000: | ||
955 | mul = 0x2710; | ||
956 | break; | ||
957 | case 2000000: | ||
958 | mul = 0x1F40; | ||
959 | break; | ||
960 | case 1843200: | 952 | case 1843200: |
961 | mul = 0x2400; | 953 | mul = 0x2400; |
962 | break; | 954 | break; |
955 | case 3000000: | ||
956 | case 2500000: | ||
957 | case 2000000: | ||
963 | case 1500000: | 958 | case 1500000: |
964 | mul = 0x1770; | ||
965 | break; | ||
966 | case 1000000: | 959 | case 1000000: |
967 | mul = 0xFA0; | ||
968 | break; | ||
969 | case 500000: | 960 | case 500000: |
970 | mul = 0x7D0; | 961 | /* mul/ps/quot = 0x9C4/0x10/0x1 will make a 500000 bps */ |
962 | mul = baud / 500000 * 0x9C4; | ||
971 | break; | 963 | break; |
972 | default: | 964 | default: |
973 | /* Use uart_get_divisor to get quot for other baud rates */ | 965 | /* Use uart_get_divisor to get quot for other baud rates */ |
diff --git a/drivers/staging/asus_oled/asus_oled.c b/drivers/staging/asus_oled/asus_oled.c index 8c95d8c2a4f4..016c6f7f8630 100644 --- a/drivers/staging/asus_oled/asus_oled.c +++ b/drivers/staging/asus_oled/asus_oled.c | |||
@@ -620,13 +620,13 @@ static ssize_t class_set_picture(struct device *device, | |||
620 | 620 | ||
621 | #define ASUS_OLED_DEVICE_ATTR(_file) dev_attr_asus_oled_##_file | 621 | #define ASUS_OLED_DEVICE_ATTR(_file) dev_attr_asus_oled_##_file |
622 | 622 | ||
623 | static DEVICE_ATTR(asus_oled_enabled, S_IWUGO | S_IRUGO, | 623 | static DEVICE_ATTR(asus_oled_enabled, S_IWUSR | S_IRUGO, |
624 | get_enabled, set_enabled); | 624 | get_enabled, set_enabled); |
625 | static DEVICE_ATTR(asus_oled_picture, S_IWUGO , NULL, set_picture); | 625 | static DEVICE_ATTR(asus_oled_picture, S_IWUSR , NULL, set_picture); |
626 | 626 | ||
627 | static DEVICE_ATTR(enabled, S_IWUGO | S_IRUGO, | 627 | static DEVICE_ATTR(enabled, S_IWUSR | S_IRUGO, |
628 | class_get_enabled, class_set_enabled); | 628 | class_get_enabled, class_set_enabled); |
629 | static DEVICE_ATTR(picture, S_IWUGO, NULL, class_set_picture); | 629 | static DEVICE_ATTR(picture, S_IWUSR, NULL, class_set_picture); |
630 | 630 | ||
631 | static int asus_oled_probe(struct usb_interface *interface, | 631 | static int asus_oled_probe(struct usb_interface *interface, |
632 | const struct usb_device_id *id) | 632 | const struct usb_device_id *id) |
diff --git a/drivers/staging/batman-adv/hard-interface.c b/drivers/staging/batman-adv/hard-interface.c index b68a7e5173be..d85de82f941a 100644 --- a/drivers/staging/batman-adv/hard-interface.c +++ b/drivers/staging/batman-adv/hard-interface.c | |||
@@ -463,9 +463,6 @@ static void hardif_remove_interface(struct batman_if *batman_if) | |||
463 | return; | 463 | return; |
464 | 464 | ||
465 | batman_if->if_status = IF_TO_BE_REMOVED; | 465 | batman_if->if_status = IF_TO_BE_REMOVED; |
466 | |||
467 | /* caller must take if_list_lock */ | ||
468 | list_del_rcu(&batman_if->list); | ||
469 | synchronize_rcu(); | 466 | synchronize_rcu(); |
470 | sysfs_del_hardif(&batman_if->hardif_obj); | 467 | sysfs_del_hardif(&batman_if->hardif_obj); |
471 | hardif_put(batman_if); | 468 | hardif_put(batman_if); |
@@ -474,13 +471,21 @@ static void hardif_remove_interface(struct batman_if *batman_if) | |||
474 | void hardif_remove_interfaces(void) | 471 | void hardif_remove_interfaces(void) |
475 | { | 472 | { |
476 | struct batman_if *batman_if, *batman_if_tmp; | 473 | struct batman_if *batman_if, *batman_if_tmp; |
474 | struct list_head if_queue; | ||
475 | |||
476 | INIT_LIST_HEAD(&if_queue); | ||
477 | 477 | ||
478 | rtnl_lock(); | ||
479 | spin_lock(&if_list_lock); | 478 | spin_lock(&if_list_lock); |
480 | list_for_each_entry_safe(batman_if, batman_if_tmp, &if_list, list) { | 479 | list_for_each_entry_safe(batman_if, batman_if_tmp, &if_list, list) { |
481 | hardif_remove_interface(batman_if); | 480 | list_del_rcu(&batman_if->list); |
481 | list_add_tail(&batman_if->list, &if_queue); | ||
482 | } | 482 | } |
483 | spin_unlock(&if_list_lock); | 483 | spin_unlock(&if_list_lock); |
484 | |||
485 | rtnl_lock(); | ||
486 | list_for_each_entry_safe(batman_if, batman_if_tmp, &if_queue, list) { | ||
487 | hardif_remove_interface(batman_if); | ||
488 | } | ||
484 | rtnl_unlock(); | 489 | rtnl_unlock(); |
485 | } | 490 | } |
486 | 491 | ||
@@ -507,8 +512,10 @@ static int hard_if_event(struct notifier_block *this, | |||
507 | break; | 512 | break; |
508 | case NETDEV_UNREGISTER: | 513 | case NETDEV_UNREGISTER: |
509 | spin_lock(&if_list_lock); | 514 | spin_lock(&if_list_lock); |
510 | hardif_remove_interface(batman_if); | 515 | list_del_rcu(&batman_if->list); |
511 | spin_unlock(&if_list_lock); | 516 | spin_unlock(&if_list_lock); |
517 | |||
518 | hardif_remove_interface(batman_if); | ||
512 | break; | 519 | break; |
513 | case NETDEV_CHANGEMTU: | 520 | case NETDEV_CHANGEMTU: |
514 | if (batman_if->soft_iface) | 521 | if (batman_if->soft_iface) |
diff --git a/drivers/staging/batman-adv/soft-interface.c b/drivers/staging/batman-adv/soft-interface.c index 3904db9ce7b1..0e996181daf7 100644 --- a/drivers/staging/batman-adv/soft-interface.c +++ b/drivers/staging/batman-adv/soft-interface.c | |||
@@ -194,14 +194,15 @@ void interface_rx(struct net_device *soft_iface, | |||
194 | struct bat_priv *priv = netdev_priv(soft_iface); | 194 | struct bat_priv *priv = netdev_priv(soft_iface); |
195 | 195 | ||
196 | /* check if enough space is available for pulling, and pull */ | 196 | /* check if enough space is available for pulling, and pull */ |
197 | if (!pskb_may_pull(skb, hdr_size)) { | 197 | if (!pskb_may_pull(skb, hdr_size)) |
198 | kfree_skb(skb); | 198 | goto dropped; |
199 | return; | 199 | |
200 | } | ||
201 | skb_pull_rcsum(skb, hdr_size); | 200 | skb_pull_rcsum(skb, hdr_size); |
202 | /* skb_set_mac_header(skb, -sizeof(struct ethhdr));*/ | 201 | /* skb_set_mac_header(skb, -sizeof(struct ethhdr));*/ |
203 | 202 | ||
204 | /* skb->dev & skb->pkt_type are set here */ | 203 | /* skb->dev & skb->pkt_type are set here */ |
204 | if (unlikely(!pskb_may_pull(skb, ETH_HLEN))) | ||
205 | goto dropped; | ||
205 | skb->protocol = eth_type_trans(skb, soft_iface); | 206 | skb->protocol = eth_type_trans(skb, soft_iface); |
206 | 207 | ||
207 | /* should not be neccesary anymore as we use skb_pull_rcsum() | 208 | /* should not be neccesary anymore as we use skb_pull_rcsum() |
@@ -216,6 +217,11 @@ void interface_rx(struct net_device *soft_iface, | |||
216 | soft_iface->last_rx = jiffies; | 217 | soft_iface->last_rx = jiffies; |
217 | 218 | ||
218 | netif_rx(skb); | 219 | netif_rx(skb); |
220 | return; | ||
221 | |||
222 | dropped: | ||
223 | kfree_skb(skb); | ||
224 | return; | ||
219 | } | 225 | } |
220 | 226 | ||
221 | #ifdef HAVE_NET_DEVICE_OPS | 227 | #ifdef HAVE_NET_DEVICE_OPS |
diff --git a/drivers/staging/brcm80211/README b/drivers/staging/brcm80211/README index c8f1cf1b4409..a27bb0b4f581 100644 --- a/drivers/staging/brcm80211/README +++ b/drivers/staging/brcm80211/README | |||
@@ -88,7 +88,9 @@ with the driver. | |||
88 | 88 | ||
89 | Contact Info: | 89 | Contact Info: |
90 | ============= | 90 | ============= |
91 | Brett Rudley brudley@broadcom.com | 91 | Brett Rudley brudley@broadcom.com |
92 | Henry Ptasinski henryp@broadcom.com | 92 | Henry Ptasinski henryp@broadcom.com |
93 | Dowan Kim dowan@broadcom.com | 93 | Dowan Kim dowan@broadcom.com |
94 | Roland Vossen rvossen@broadcom.com | ||
95 | Arend van Spriel arend@broadcom.com | ||
94 | 96 | ||
diff --git a/drivers/staging/brcm80211/TODO b/drivers/staging/brcm80211/TODO index dbf904184899..24ebadbe4241 100644 --- a/drivers/staging/brcm80211/TODO +++ b/drivers/staging/brcm80211/TODO | |||
@@ -46,4 +46,6 @@ Contact | |||
46 | Brett Rudley <brudley@broadcom.com> | 46 | Brett Rudley <brudley@broadcom.com> |
47 | Henry Ptasinski <henryp@broadcom.com> | 47 | Henry Ptasinski <henryp@broadcom.com> |
48 | Dowan Kim <dowan@broadcom.com> | 48 | Dowan Kim <dowan@broadcom.com> |
49 | Roland Vossen <rvossen@broadcom.com> | ||
50 | Arend van Spriel <arend@broadcom.com> | ||
49 | 51 | ||
diff --git a/drivers/staging/comedi/drivers/usbdux.c b/drivers/staging/comedi/drivers/usbdux.c index 1f177a67ff11..de784ff08caa 100644 --- a/drivers/staging/comedi/drivers/usbdux.c +++ b/drivers/staging/comedi/drivers/usbdux.c | |||
@@ -2295,8 +2295,8 @@ static void tidy_up(struct usbduxsub *usbduxsub_tmp) | |||
2295 | usbduxsub_tmp->inBuffer = NULL; | 2295 | usbduxsub_tmp->inBuffer = NULL; |
2296 | kfree(usbduxsub_tmp->insnBuffer); | 2296 | kfree(usbduxsub_tmp->insnBuffer); |
2297 | usbduxsub_tmp->insnBuffer = NULL; | 2297 | usbduxsub_tmp->insnBuffer = NULL; |
2298 | kfree(usbduxsub_tmp->inBuffer); | 2298 | kfree(usbduxsub_tmp->outBuffer); |
2299 | usbduxsub_tmp->inBuffer = NULL; | 2299 | usbduxsub_tmp->outBuffer = NULL; |
2300 | kfree(usbduxsub_tmp->dac_commands); | 2300 | kfree(usbduxsub_tmp->dac_commands); |
2301 | usbduxsub_tmp->dac_commands = NULL; | 2301 | usbduxsub_tmp->dac_commands = NULL; |
2302 | kfree(usbduxsub_tmp->dux_commands); | 2302 | kfree(usbduxsub_tmp->dux_commands); |
diff --git a/drivers/staging/easycap/easycap.h b/drivers/staging/easycap/easycap.h index 25961c23dc0f..884263b2775d 100644 --- a/drivers/staging/easycap/easycap.h +++ b/drivers/staging/easycap/easycap.h | |||
@@ -75,6 +75,7 @@ | |||
75 | #include <linux/errno.h> | 75 | #include <linux/errno.h> |
76 | #include <linux/init.h> | 76 | #include <linux/init.h> |
77 | #include <linux/slab.h> | 77 | #include <linux/slab.h> |
78 | #include <linux/smp_lock.h> | ||
78 | #include <linux/module.h> | 79 | #include <linux/module.h> |
79 | #include <linux/kref.h> | 80 | #include <linux/kref.h> |
80 | #include <linux/usb.h> | 81 | #include <linux/usb.h> |
diff --git a/drivers/staging/frontier/tranzport.c b/drivers/staging/frontier/tranzport.c index a145a15cfdb3..8894ab14f167 100644 --- a/drivers/staging/frontier/tranzport.c +++ b/drivers/staging/frontier/tranzport.c | |||
@@ -204,7 +204,7 @@ static void usb_tranzport_abort_transfers(struct usb_tranzport *dev) | |||
204 | t->value = temp; \ | 204 | t->value = temp; \ |
205 | return count; \ | 205 | return count; \ |
206 | } \ | 206 | } \ |
207 | static DEVICE_ATTR(value, S_IWUGO | S_IRUGO, show_##value, set_##value); | 207 | static DEVICE_ATTR(value, S_IWUSR | S_IRUGO, show_##value, set_##value); |
208 | 208 | ||
209 | show_int(enable); | 209 | show_int(enable); |
210 | show_int(offline); | 210 | show_int(offline); |
diff --git a/drivers/staging/iio/accel/adis16220_core.c b/drivers/staging/iio/accel/adis16220_core.c index c86d1498737d..1c1e98aee2d9 100644 --- a/drivers/staging/iio/accel/adis16220_core.c +++ b/drivers/staging/iio/accel/adis16220_core.c | |||
@@ -507,7 +507,7 @@ static IIO_DEVICE_ATTR(reset, S_IWUSR, NULL, | |||
507 | adis16220_write_reset, 0); | 507 | adis16220_write_reset, 0); |
508 | 508 | ||
509 | #define IIO_DEV_ATTR_CAPTURE(_store) \ | 509 | #define IIO_DEV_ATTR_CAPTURE(_store) \ |
510 | IIO_DEVICE_ATTR(capture, S_IWUGO, NULL, _store, 0) | 510 | IIO_DEVICE_ATTR(capture, S_IWUSR, NULL, _store, 0) |
511 | 511 | ||
512 | static IIO_DEV_ATTR_CAPTURE(adis16220_write_capture); | 512 | static IIO_DEV_ATTR_CAPTURE(adis16220_write_capture); |
513 | 513 | ||
diff --git a/drivers/staging/intel_sst/intel_sst_stream_encoded.c b/drivers/staging/intel_sst/intel_sst_stream_encoded.c index fbae39fda5c0..5c455608b024 100644 --- a/drivers/staging/intel_sst/intel_sst_stream_encoded.c +++ b/drivers/staging/intel_sst/intel_sst_stream_encoded.c | |||
@@ -1269,7 +1269,7 @@ finish: | |||
1269 | dbufs->output_bytes_produced = total_output; | 1269 | dbufs->output_bytes_produced = total_output; |
1270 | str_info->status = str_info->prev; | 1270 | str_info->status = str_info->prev; |
1271 | str_info->prev = STREAM_DECODE; | 1271 | str_info->prev = STREAM_DECODE; |
1272 | str_info->decode_ibuf = NULL; | ||
1273 | kfree(str_info->decode_ibuf); | 1272 | kfree(str_info->decode_ibuf); |
1273 | str_info->decode_ibuf = NULL; | ||
1274 | return retval; | 1274 | return retval; |
1275 | } | 1275 | } |
diff --git a/drivers/staging/line6/control.c b/drivers/staging/line6/control.c index 040e25ca6d33..67e23b6e2d35 100644 --- a/drivers/staging/line6/control.c +++ b/drivers/staging/line6/control.c | |||
@@ -266,210 +266,210 @@ VARIAX_PARAM_R(float, mix2); | |||
266 | VARIAX_PARAM_R(float, mix1); | 266 | VARIAX_PARAM_R(float, mix1); |
267 | VARIAX_PARAM_R(int, pickup_wiring); | 267 | VARIAX_PARAM_R(int, pickup_wiring); |
268 | 268 | ||
269 | static DEVICE_ATTR(tweak, S_IWUGO | S_IRUGO, pod_get_tweak, pod_set_tweak); | 269 | static DEVICE_ATTR(tweak, S_IWUSR | S_IRUGO, pod_get_tweak, pod_set_tweak); |
270 | static DEVICE_ATTR(wah_position, S_IWUGO | S_IRUGO, pod_get_wah_position, | 270 | static DEVICE_ATTR(wah_position, S_IWUSR | S_IRUGO, pod_get_wah_position, |
271 | pod_set_wah_position); | 271 | pod_set_wah_position); |
272 | static DEVICE_ATTR(compression_gain, S_IWUGO | S_IRUGO, | 272 | static DEVICE_ATTR(compression_gain, S_IWUSR | S_IRUGO, |
273 | pod_get_compression_gain, pod_set_compression_gain); | 273 | pod_get_compression_gain, pod_set_compression_gain); |
274 | static DEVICE_ATTR(vol_pedal_position, S_IWUGO | S_IRUGO, | 274 | static DEVICE_ATTR(vol_pedal_position, S_IWUSR | S_IRUGO, |
275 | pod_get_vol_pedal_position, pod_set_vol_pedal_position); | 275 | pod_get_vol_pedal_position, pod_set_vol_pedal_position); |
276 | static DEVICE_ATTR(compression_threshold, S_IWUGO | S_IRUGO, | 276 | static DEVICE_ATTR(compression_threshold, S_IWUSR | S_IRUGO, |
277 | pod_get_compression_threshold, | 277 | pod_get_compression_threshold, |
278 | pod_set_compression_threshold); | 278 | pod_set_compression_threshold); |
279 | static DEVICE_ATTR(pan, S_IWUGO | S_IRUGO, pod_get_pan, pod_set_pan); | 279 | static DEVICE_ATTR(pan, S_IWUSR | S_IRUGO, pod_get_pan, pod_set_pan); |
280 | static DEVICE_ATTR(amp_model_setup, S_IWUGO | S_IRUGO, pod_get_amp_model_setup, | 280 | static DEVICE_ATTR(amp_model_setup, S_IWUSR | S_IRUGO, pod_get_amp_model_setup, |
281 | pod_set_amp_model_setup); | 281 | pod_set_amp_model_setup); |
282 | static DEVICE_ATTR(amp_model, S_IWUGO | S_IRUGO, pod_get_amp_model, | 282 | static DEVICE_ATTR(amp_model, S_IWUSR | S_IRUGO, pod_get_amp_model, |
283 | pod_set_amp_model); | 283 | pod_set_amp_model); |
284 | static DEVICE_ATTR(drive, S_IWUGO | S_IRUGO, pod_get_drive, pod_set_drive); | 284 | static DEVICE_ATTR(drive, S_IWUSR | S_IRUGO, pod_get_drive, pod_set_drive); |
285 | static DEVICE_ATTR(bass, S_IWUGO | S_IRUGO, pod_get_bass, pod_set_bass); | 285 | static DEVICE_ATTR(bass, S_IWUSR | S_IRUGO, pod_get_bass, pod_set_bass); |
286 | static DEVICE_ATTR(mid, S_IWUGO | S_IRUGO, pod_get_mid, pod_set_mid); | 286 | static DEVICE_ATTR(mid, S_IWUSR | S_IRUGO, pod_get_mid, pod_set_mid); |
287 | static DEVICE_ATTR(lowmid, S_IWUGO | S_IRUGO, pod_get_lowmid, pod_set_lowmid); | 287 | static DEVICE_ATTR(lowmid, S_IWUSR | S_IRUGO, pod_get_lowmid, pod_set_lowmid); |
288 | static DEVICE_ATTR(treble, S_IWUGO | S_IRUGO, pod_get_treble, pod_set_treble); | 288 | static DEVICE_ATTR(treble, S_IWUSR | S_IRUGO, pod_get_treble, pod_set_treble); |
289 | static DEVICE_ATTR(highmid, S_IWUGO | S_IRUGO, pod_get_highmid, | 289 | static DEVICE_ATTR(highmid, S_IWUSR | S_IRUGO, pod_get_highmid, |
290 | pod_set_highmid); | 290 | pod_set_highmid); |
291 | static DEVICE_ATTR(chan_vol, S_IWUGO | S_IRUGO, pod_get_chan_vol, | 291 | static DEVICE_ATTR(chan_vol, S_IWUSR | S_IRUGO, pod_get_chan_vol, |
292 | pod_set_chan_vol); | 292 | pod_set_chan_vol); |
293 | static DEVICE_ATTR(reverb_mix, S_IWUGO | S_IRUGO, pod_get_reverb_mix, | 293 | static DEVICE_ATTR(reverb_mix, S_IWUSR | S_IRUGO, pod_get_reverb_mix, |
294 | pod_set_reverb_mix); | 294 | pod_set_reverb_mix); |
295 | static DEVICE_ATTR(effect_setup, S_IWUGO | S_IRUGO, pod_get_effect_setup, | 295 | static DEVICE_ATTR(effect_setup, S_IWUSR | S_IRUGO, pod_get_effect_setup, |
296 | pod_set_effect_setup); | 296 | pod_set_effect_setup); |
297 | static DEVICE_ATTR(band_1_frequency, S_IWUGO | S_IRUGO, | 297 | static DEVICE_ATTR(band_1_frequency, S_IWUSR | S_IRUGO, |
298 | pod_get_band_1_frequency, pod_set_band_1_frequency); | 298 | pod_get_band_1_frequency, pod_set_band_1_frequency); |
299 | static DEVICE_ATTR(presence, S_IWUGO | S_IRUGO, pod_get_presence, | 299 | static DEVICE_ATTR(presence, S_IWUSR | S_IRUGO, pod_get_presence, |
300 | pod_set_presence); | 300 | pod_set_presence); |
301 | static DEVICE_ATTR2(treble__bass, treble, S_IWUGO | S_IRUGO, | 301 | static DEVICE_ATTR2(treble__bass, treble, S_IWUSR | S_IRUGO, |
302 | pod_get_treble__bass, pod_set_treble__bass); | 302 | pod_get_treble__bass, pod_set_treble__bass); |
303 | static DEVICE_ATTR(noise_gate_enable, S_IWUGO | S_IRUGO, | 303 | static DEVICE_ATTR(noise_gate_enable, S_IWUSR | S_IRUGO, |
304 | pod_get_noise_gate_enable, pod_set_noise_gate_enable); | 304 | pod_get_noise_gate_enable, pod_set_noise_gate_enable); |
305 | static DEVICE_ATTR(gate_threshold, S_IWUGO | S_IRUGO, pod_get_gate_threshold, | 305 | static DEVICE_ATTR(gate_threshold, S_IWUSR | S_IRUGO, pod_get_gate_threshold, |
306 | pod_set_gate_threshold); | 306 | pod_set_gate_threshold); |
307 | static DEVICE_ATTR(gate_decay_time, S_IWUGO | S_IRUGO, pod_get_gate_decay_time, | 307 | static DEVICE_ATTR(gate_decay_time, S_IWUSR | S_IRUGO, pod_get_gate_decay_time, |
308 | pod_set_gate_decay_time); | 308 | pod_set_gate_decay_time); |
309 | static DEVICE_ATTR(stomp_enable, S_IWUGO | S_IRUGO, pod_get_stomp_enable, | 309 | static DEVICE_ATTR(stomp_enable, S_IWUSR | S_IRUGO, pod_get_stomp_enable, |
310 | pod_set_stomp_enable); | 310 | pod_set_stomp_enable); |
311 | static DEVICE_ATTR(comp_enable, S_IWUGO | S_IRUGO, pod_get_comp_enable, | 311 | static DEVICE_ATTR(comp_enable, S_IWUSR | S_IRUGO, pod_get_comp_enable, |
312 | pod_set_comp_enable); | 312 | pod_set_comp_enable); |
313 | static DEVICE_ATTR(stomp_time, S_IWUGO | S_IRUGO, pod_get_stomp_time, | 313 | static DEVICE_ATTR(stomp_time, S_IWUSR | S_IRUGO, pod_get_stomp_time, |
314 | pod_set_stomp_time); | 314 | pod_set_stomp_time); |
315 | static DEVICE_ATTR(delay_enable, S_IWUGO | S_IRUGO, pod_get_delay_enable, | 315 | static DEVICE_ATTR(delay_enable, S_IWUSR | S_IRUGO, pod_get_delay_enable, |
316 | pod_set_delay_enable); | 316 | pod_set_delay_enable); |
317 | static DEVICE_ATTR(mod_param_1, S_IWUGO | S_IRUGO, pod_get_mod_param_1, | 317 | static DEVICE_ATTR(mod_param_1, S_IWUSR | S_IRUGO, pod_get_mod_param_1, |
318 | pod_set_mod_param_1); | 318 | pod_set_mod_param_1); |
319 | static DEVICE_ATTR(delay_param_1, S_IWUGO | S_IRUGO, pod_get_delay_param_1, | 319 | static DEVICE_ATTR(delay_param_1, S_IWUSR | S_IRUGO, pod_get_delay_param_1, |
320 | pod_set_delay_param_1); | 320 | pod_set_delay_param_1); |
321 | static DEVICE_ATTR(delay_param_1_note_value, S_IWUGO | S_IRUGO, | 321 | static DEVICE_ATTR(delay_param_1_note_value, S_IWUSR | S_IRUGO, |
322 | pod_get_delay_param_1_note_value, | 322 | pod_get_delay_param_1_note_value, |
323 | pod_set_delay_param_1_note_value); | 323 | pod_set_delay_param_1_note_value); |
324 | static DEVICE_ATTR2(band_2_frequency__bass, band_2_frequency, S_IWUGO | S_IRUGO, | 324 | static DEVICE_ATTR2(band_2_frequency__bass, band_2_frequency, S_IWUSR | S_IRUGO, |
325 | pod_get_band_2_frequency__bass, | 325 | pod_get_band_2_frequency__bass, |
326 | pod_set_band_2_frequency__bass); | 326 | pod_set_band_2_frequency__bass); |
327 | static DEVICE_ATTR(delay_param_2, S_IWUGO | S_IRUGO, pod_get_delay_param_2, | 327 | static DEVICE_ATTR(delay_param_2, S_IWUSR | S_IRUGO, pod_get_delay_param_2, |
328 | pod_set_delay_param_2); | 328 | pod_set_delay_param_2); |
329 | static DEVICE_ATTR(delay_volume_mix, S_IWUGO | S_IRUGO, | 329 | static DEVICE_ATTR(delay_volume_mix, S_IWUSR | S_IRUGO, |
330 | pod_get_delay_volume_mix, pod_set_delay_volume_mix); | 330 | pod_get_delay_volume_mix, pod_set_delay_volume_mix); |
331 | static DEVICE_ATTR(delay_param_3, S_IWUGO | S_IRUGO, pod_get_delay_param_3, | 331 | static DEVICE_ATTR(delay_param_3, S_IWUSR | S_IRUGO, pod_get_delay_param_3, |
332 | pod_set_delay_param_3); | 332 | pod_set_delay_param_3); |
333 | static DEVICE_ATTR(reverb_enable, S_IWUGO | S_IRUGO, pod_get_reverb_enable, | 333 | static DEVICE_ATTR(reverb_enable, S_IWUSR | S_IRUGO, pod_get_reverb_enable, |
334 | pod_set_reverb_enable); | 334 | pod_set_reverb_enable); |
335 | static DEVICE_ATTR(reverb_type, S_IWUGO | S_IRUGO, pod_get_reverb_type, | 335 | static DEVICE_ATTR(reverb_type, S_IWUSR | S_IRUGO, pod_get_reverb_type, |
336 | pod_set_reverb_type); | 336 | pod_set_reverb_type); |
337 | static DEVICE_ATTR(reverb_decay, S_IWUGO | S_IRUGO, pod_get_reverb_decay, | 337 | static DEVICE_ATTR(reverb_decay, S_IWUSR | S_IRUGO, pod_get_reverb_decay, |
338 | pod_set_reverb_decay); | 338 | pod_set_reverb_decay); |
339 | static DEVICE_ATTR(reverb_tone, S_IWUGO | S_IRUGO, pod_get_reverb_tone, | 339 | static DEVICE_ATTR(reverb_tone, S_IWUSR | S_IRUGO, pod_get_reverb_tone, |
340 | pod_set_reverb_tone); | 340 | pod_set_reverb_tone); |
341 | static DEVICE_ATTR(reverb_pre_delay, S_IWUGO | S_IRUGO, | 341 | static DEVICE_ATTR(reverb_pre_delay, S_IWUSR | S_IRUGO, |
342 | pod_get_reverb_pre_delay, pod_set_reverb_pre_delay); | 342 | pod_get_reverb_pre_delay, pod_set_reverb_pre_delay); |
343 | static DEVICE_ATTR(reverb_pre_post, S_IWUGO | S_IRUGO, pod_get_reverb_pre_post, | 343 | static DEVICE_ATTR(reverb_pre_post, S_IWUSR | S_IRUGO, pod_get_reverb_pre_post, |
344 | pod_set_reverb_pre_post); | 344 | pod_set_reverb_pre_post); |
345 | static DEVICE_ATTR(band_2_frequency, S_IWUGO | S_IRUGO, | 345 | static DEVICE_ATTR(band_2_frequency, S_IWUSR | S_IRUGO, |
346 | pod_get_band_2_frequency, pod_set_band_2_frequency); | 346 | pod_get_band_2_frequency, pod_set_band_2_frequency); |
347 | static DEVICE_ATTR2(band_3_frequency__bass, band_3_frequency, S_IWUGO | S_IRUGO, | 347 | static DEVICE_ATTR2(band_3_frequency__bass, band_3_frequency, S_IWUSR | S_IRUGO, |
348 | pod_get_band_3_frequency__bass, | 348 | pod_get_band_3_frequency__bass, |
349 | pod_set_band_3_frequency__bass); | 349 | pod_set_band_3_frequency__bass); |
350 | static DEVICE_ATTR(wah_enable, S_IWUGO | S_IRUGO, pod_get_wah_enable, | 350 | static DEVICE_ATTR(wah_enable, S_IWUSR | S_IRUGO, pod_get_wah_enable, |
351 | pod_set_wah_enable); | 351 | pod_set_wah_enable); |
352 | static DEVICE_ATTR(modulation_lo_cut, S_IWUGO | S_IRUGO, | 352 | static DEVICE_ATTR(modulation_lo_cut, S_IWUSR | S_IRUGO, |
353 | pod_get_modulation_lo_cut, pod_set_modulation_lo_cut); | 353 | pod_get_modulation_lo_cut, pod_set_modulation_lo_cut); |
354 | static DEVICE_ATTR(delay_reverb_lo_cut, S_IWUGO | S_IRUGO, | 354 | static DEVICE_ATTR(delay_reverb_lo_cut, S_IWUSR | S_IRUGO, |
355 | pod_get_delay_reverb_lo_cut, pod_set_delay_reverb_lo_cut); | 355 | pod_get_delay_reverb_lo_cut, pod_set_delay_reverb_lo_cut); |
356 | static DEVICE_ATTR(volume_pedal_minimum, S_IWUGO | S_IRUGO, | 356 | static DEVICE_ATTR(volume_pedal_minimum, S_IWUSR | S_IRUGO, |
357 | pod_get_volume_pedal_minimum, pod_set_volume_pedal_minimum); | 357 | pod_get_volume_pedal_minimum, pod_set_volume_pedal_minimum); |
358 | static DEVICE_ATTR(eq_pre_post, S_IWUGO | S_IRUGO, pod_get_eq_pre_post, | 358 | static DEVICE_ATTR(eq_pre_post, S_IWUSR | S_IRUGO, pod_get_eq_pre_post, |
359 | pod_set_eq_pre_post); | 359 | pod_set_eq_pre_post); |
360 | static DEVICE_ATTR(volume_pre_post, S_IWUGO | S_IRUGO, pod_get_volume_pre_post, | 360 | static DEVICE_ATTR(volume_pre_post, S_IWUSR | S_IRUGO, pod_get_volume_pre_post, |
361 | pod_set_volume_pre_post); | 361 | pod_set_volume_pre_post); |
362 | static DEVICE_ATTR(di_model, S_IWUGO | S_IRUGO, pod_get_di_model, | 362 | static DEVICE_ATTR(di_model, S_IWUSR | S_IRUGO, pod_get_di_model, |
363 | pod_set_di_model); | 363 | pod_set_di_model); |
364 | static DEVICE_ATTR(di_delay, S_IWUGO | S_IRUGO, pod_get_di_delay, | 364 | static DEVICE_ATTR(di_delay, S_IWUSR | S_IRUGO, pod_get_di_delay, |
365 | pod_set_di_delay); | 365 | pod_set_di_delay); |
366 | static DEVICE_ATTR(mod_enable, S_IWUGO | S_IRUGO, pod_get_mod_enable, | 366 | static DEVICE_ATTR(mod_enable, S_IWUSR | S_IRUGO, pod_get_mod_enable, |
367 | pod_set_mod_enable); | 367 | pod_set_mod_enable); |
368 | static DEVICE_ATTR(mod_param_1_note_value, S_IWUGO | S_IRUGO, | 368 | static DEVICE_ATTR(mod_param_1_note_value, S_IWUSR | S_IRUGO, |
369 | pod_get_mod_param_1_note_value, | 369 | pod_get_mod_param_1_note_value, |
370 | pod_set_mod_param_1_note_value); | 370 | pod_set_mod_param_1_note_value); |
371 | static DEVICE_ATTR(mod_param_2, S_IWUGO | S_IRUGO, pod_get_mod_param_2, | 371 | static DEVICE_ATTR(mod_param_2, S_IWUSR | S_IRUGO, pod_get_mod_param_2, |
372 | pod_set_mod_param_2); | 372 | pod_set_mod_param_2); |
373 | static DEVICE_ATTR(mod_param_3, S_IWUGO | S_IRUGO, pod_get_mod_param_3, | 373 | static DEVICE_ATTR(mod_param_3, S_IWUSR | S_IRUGO, pod_get_mod_param_3, |
374 | pod_set_mod_param_3); | 374 | pod_set_mod_param_3); |
375 | static DEVICE_ATTR(mod_param_4, S_IWUGO | S_IRUGO, pod_get_mod_param_4, | 375 | static DEVICE_ATTR(mod_param_4, S_IWUSR | S_IRUGO, pod_get_mod_param_4, |
376 | pod_set_mod_param_4); | 376 | pod_set_mod_param_4); |
377 | static DEVICE_ATTR(mod_param_5, S_IWUGO | S_IRUGO, pod_get_mod_param_5, | 377 | static DEVICE_ATTR(mod_param_5, S_IWUSR | S_IRUGO, pod_get_mod_param_5, |
378 | pod_set_mod_param_5); | 378 | pod_set_mod_param_5); |
379 | static DEVICE_ATTR(mod_volume_mix, S_IWUGO | S_IRUGO, pod_get_mod_volume_mix, | 379 | static DEVICE_ATTR(mod_volume_mix, S_IWUSR | S_IRUGO, pod_get_mod_volume_mix, |
380 | pod_set_mod_volume_mix); | 380 | pod_set_mod_volume_mix); |
381 | static DEVICE_ATTR(mod_pre_post, S_IWUGO | S_IRUGO, pod_get_mod_pre_post, | 381 | static DEVICE_ATTR(mod_pre_post, S_IWUSR | S_IRUGO, pod_get_mod_pre_post, |
382 | pod_set_mod_pre_post); | 382 | pod_set_mod_pre_post); |
383 | static DEVICE_ATTR(modulation_model, S_IWUGO | S_IRUGO, | 383 | static DEVICE_ATTR(modulation_model, S_IWUSR | S_IRUGO, |
384 | pod_get_modulation_model, pod_set_modulation_model); | 384 | pod_get_modulation_model, pod_set_modulation_model); |
385 | static DEVICE_ATTR(band_3_frequency, S_IWUGO | S_IRUGO, | 385 | static DEVICE_ATTR(band_3_frequency, S_IWUSR | S_IRUGO, |
386 | pod_get_band_3_frequency, pod_set_band_3_frequency); | 386 | pod_get_band_3_frequency, pod_set_band_3_frequency); |
387 | static DEVICE_ATTR2(band_4_frequency__bass, band_4_frequency, S_IWUGO | S_IRUGO, | 387 | static DEVICE_ATTR2(band_4_frequency__bass, band_4_frequency, S_IWUSR | S_IRUGO, |
388 | pod_get_band_4_frequency__bass, | 388 | pod_get_band_4_frequency__bass, |
389 | pod_set_band_4_frequency__bass); | 389 | pod_set_band_4_frequency__bass); |
390 | static DEVICE_ATTR(mod_param_1_double_precision, S_IWUGO | S_IRUGO, | 390 | static DEVICE_ATTR(mod_param_1_double_precision, S_IWUSR | S_IRUGO, |
391 | pod_get_mod_param_1_double_precision, | 391 | pod_get_mod_param_1_double_precision, |
392 | pod_set_mod_param_1_double_precision); | 392 | pod_set_mod_param_1_double_precision); |
393 | static DEVICE_ATTR(delay_param_1_double_precision, S_IWUGO | S_IRUGO, | 393 | static DEVICE_ATTR(delay_param_1_double_precision, S_IWUSR | S_IRUGO, |
394 | pod_get_delay_param_1_double_precision, | 394 | pod_get_delay_param_1_double_precision, |
395 | pod_set_delay_param_1_double_precision); | 395 | pod_set_delay_param_1_double_precision); |
396 | static DEVICE_ATTR(eq_enable, S_IWUGO | S_IRUGO, pod_get_eq_enable, | 396 | static DEVICE_ATTR(eq_enable, S_IWUSR | S_IRUGO, pod_get_eq_enable, |
397 | pod_set_eq_enable); | 397 | pod_set_eq_enable); |
398 | static DEVICE_ATTR(tap, S_IWUGO | S_IRUGO, pod_get_tap, pod_set_tap); | 398 | static DEVICE_ATTR(tap, S_IWUSR | S_IRUGO, pod_get_tap, pod_set_tap); |
399 | static DEVICE_ATTR(volume_tweak_pedal_assign, S_IWUGO | S_IRUGO, | 399 | static DEVICE_ATTR(volume_tweak_pedal_assign, S_IWUSR | S_IRUGO, |
400 | pod_get_volume_tweak_pedal_assign, | 400 | pod_get_volume_tweak_pedal_assign, |
401 | pod_set_volume_tweak_pedal_assign); | 401 | pod_set_volume_tweak_pedal_assign); |
402 | static DEVICE_ATTR(band_5_frequency, S_IWUGO | S_IRUGO, | 402 | static DEVICE_ATTR(band_5_frequency, S_IWUSR | S_IRUGO, |
403 | pod_get_band_5_frequency, pod_set_band_5_frequency); | 403 | pod_get_band_5_frequency, pod_set_band_5_frequency); |
404 | static DEVICE_ATTR(tuner, S_IWUGO | S_IRUGO, pod_get_tuner, pod_set_tuner); | 404 | static DEVICE_ATTR(tuner, S_IWUSR | S_IRUGO, pod_get_tuner, pod_set_tuner); |
405 | static DEVICE_ATTR(mic_selection, S_IWUGO | S_IRUGO, pod_get_mic_selection, | 405 | static DEVICE_ATTR(mic_selection, S_IWUSR | S_IRUGO, pod_get_mic_selection, |
406 | pod_set_mic_selection); | 406 | pod_set_mic_selection); |
407 | static DEVICE_ATTR(cabinet_model, S_IWUGO | S_IRUGO, pod_get_cabinet_model, | 407 | static DEVICE_ATTR(cabinet_model, S_IWUSR | S_IRUGO, pod_get_cabinet_model, |
408 | pod_set_cabinet_model); | 408 | pod_set_cabinet_model); |
409 | static DEVICE_ATTR(stomp_model, S_IWUGO | S_IRUGO, pod_get_stomp_model, | 409 | static DEVICE_ATTR(stomp_model, S_IWUSR | S_IRUGO, pod_get_stomp_model, |
410 | pod_set_stomp_model); | 410 | pod_set_stomp_model); |
411 | static DEVICE_ATTR(roomlevel, S_IWUGO | S_IRUGO, pod_get_roomlevel, | 411 | static DEVICE_ATTR(roomlevel, S_IWUSR | S_IRUGO, pod_get_roomlevel, |
412 | pod_set_roomlevel); | 412 | pod_set_roomlevel); |
413 | static DEVICE_ATTR(band_4_frequency, S_IWUGO | S_IRUGO, | 413 | static DEVICE_ATTR(band_4_frequency, S_IWUSR | S_IRUGO, |
414 | pod_get_band_4_frequency, pod_set_band_4_frequency); | 414 | pod_get_band_4_frequency, pod_set_band_4_frequency); |
415 | static DEVICE_ATTR(band_6_frequency, S_IWUGO | S_IRUGO, | 415 | static DEVICE_ATTR(band_6_frequency, S_IWUSR | S_IRUGO, |
416 | pod_get_band_6_frequency, pod_set_band_6_frequency); | 416 | pod_get_band_6_frequency, pod_set_band_6_frequency); |
417 | static DEVICE_ATTR(stomp_param_1_note_value, S_IWUGO | S_IRUGO, | 417 | static DEVICE_ATTR(stomp_param_1_note_value, S_IWUSR | S_IRUGO, |
418 | pod_get_stomp_param_1_note_value, | 418 | pod_get_stomp_param_1_note_value, |
419 | pod_set_stomp_param_1_note_value); | 419 | pod_set_stomp_param_1_note_value); |
420 | static DEVICE_ATTR(stomp_param_2, S_IWUGO | S_IRUGO, pod_get_stomp_param_2, | 420 | static DEVICE_ATTR(stomp_param_2, S_IWUSR | S_IRUGO, pod_get_stomp_param_2, |
421 | pod_set_stomp_param_2); | 421 | pod_set_stomp_param_2); |
422 | static DEVICE_ATTR(stomp_param_3, S_IWUGO | S_IRUGO, pod_get_stomp_param_3, | 422 | static DEVICE_ATTR(stomp_param_3, S_IWUSR | S_IRUGO, pod_get_stomp_param_3, |
423 | pod_set_stomp_param_3); | 423 | pod_set_stomp_param_3); |
424 | static DEVICE_ATTR(stomp_param_4, S_IWUGO | S_IRUGO, pod_get_stomp_param_4, | 424 | static DEVICE_ATTR(stomp_param_4, S_IWUSR | S_IRUGO, pod_get_stomp_param_4, |
425 | pod_set_stomp_param_4); | 425 | pod_set_stomp_param_4); |
426 | static DEVICE_ATTR(stomp_param_5, S_IWUGO | S_IRUGO, pod_get_stomp_param_5, | 426 | static DEVICE_ATTR(stomp_param_5, S_IWUSR | S_IRUGO, pod_get_stomp_param_5, |
427 | pod_set_stomp_param_5); | 427 | pod_set_stomp_param_5); |
428 | static DEVICE_ATTR(stomp_param_6, S_IWUGO | S_IRUGO, pod_get_stomp_param_6, | 428 | static DEVICE_ATTR(stomp_param_6, S_IWUSR | S_IRUGO, pod_get_stomp_param_6, |
429 | pod_set_stomp_param_6); | 429 | pod_set_stomp_param_6); |
430 | static DEVICE_ATTR(amp_switch_select, S_IWUGO | S_IRUGO, | 430 | static DEVICE_ATTR(amp_switch_select, S_IWUSR | S_IRUGO, |
431 | pod_get_amp_switch_select, pod_set_amp_switch_select); | 431 | pod_get_amp_switch_select, pod_set_amp_switch_select); |
432 | static DEVICE_ATTR(delay_param_4, S_IWUGO | S_IRUGO, pod_get_delay_param_4, | 432 | static DEVICE_ATTR(delay_param_4, S_IWUSR | S_IRUGO, pod_get_delay_param_4, |
433 | pod_set_delay_param_4); | 433 | pod_set_delay_param_4); |
434 | static DEVICE_ATTR(delay_param_5, S_IWUGO | S_IRUGO, pod_get_delay_param_5, | 434 | static DEVICE_ATTR(delay_param_5, S_IWUSR | S_IRUGO, pod_get_delay_param_5, |
435 | pod_set_delay_param_5); | 435 | pod_set_delay_param_5); |
436 | static DEVICE_ATTR(delay_pre_post, S_IWUGO | S_IRUGO, pod_get_delay_pre_post, | 436 | static DEVICE_ATTR(delay_pre_post, S_IWUSR | S_IRUGO, pod_get_delay_pre_post, |
437 | pod_set_delay_pre_post); | 437 | pod_set_delay_pre_post); |
438 | static DEVICE_ATTR(delay_model, S_IWUGO | S_IRUGO, pod_get_delay_model, | 438 | static DEVICE_ATTR(delay_model, S_IWUSR | S_IRUGO, pod_get_delay_model, |
439 | pod_set_delay_model); | 439 | pod_set_delay_model); |
440 | static DEVICE_ATTR(delay_verb_model, S_IWUGO | S_IRUGO, | 440 | static DEVICE_ATTR(delay_verb_model, S_IWUSR | S_IRUGO, |
441 | pod_get_delay_verb_model, pod_set_delay_verb_model); | 441 | pod_get_delay_verb_model, pod_set_delay_verb_model); |
442 | static DEVICE_ATTR(tempo_msb, S_IWUGO | S_IRUGO, pod_get_tempo_msb, | 442 | static DEVICE_ATTR(tempo_msb, S_IWUSR | S_IRUGO, pod_get_tempo_msb, |
443 | pod_set_tempo_msb); | 443 | pod_set_tempo_msb); |
444 | static DEVICE_ATTR(tempo_lsb, S_IWUGO | S_IRUGO, pod_get_tempo_lsb, | 444 | static DEVICE_ATTR(tempo_lsb, S_IWUSR | S_IRUGO, pod_get_tempo_lsb, |
445 | pod_set_tempo_lsb); | 445 | pod_set_tempo_lsb); |
446 | static DEVICE_ATTR(wah_model, S_IWUGO | S_IRUGO, pod_get_wah_model, | 446 | static DEVICE_ATTR(wah_model, S_IWUSR | S_IRUGO, pod_get_wah_model, |
447 | pod_set_wah_model); | 447 | pod_set_wah_model); |
448 | static DEVICE_ATTR(bypass_volume, S_IWUGO | S_IRUGO, pod_get_bypass_volume, | 448 | static DEVICE_ATTR(bypass_volume, S_IWUSR | S_IRUGO, pod_get_bypass_volume, |
449 | pod_set_bypass_volume); | 449 | pod_set_bypass_volume); |
450 | static DEVICE_ATTR(fx_loop_on_off, S_IWUGO | S_IRUGO, pod_get_fx_loop_on_off, | 450 | static DEVICE_ATTR(fx_loop_on_off, S_IWUSR | S_IRUGO, pod_get_fx_loop_on_off, |
451 | pod_set_fx_loop_on_off); | 451 | pod_set_fx_loop_on_off); |
452 | static DEVICE_ATTR(tweak_param_select, S_IWUGO | S_IRUGO, | 452 | static DEVICE_ATTR(tweak_param_select, S_IWUSR | S_IRUGO, |
453 | pod_get_tweak_param_select, pod_set_tweak_param_select); | 453 | pod_get_tweak_param_select, pod_set_tweak_param_select); |
454 | static DEVICE_ATTR(amp1_engage, S_IWUGO | S_IRUGO, pod_get_amp1_engage, | 454 | static DEVICE_ATTR(amp1_engage, S_IWUSR | S_IRUGO, pod_get_amp1_engage, |
455 | pod_set_amp1_engage); | 455 | pod_set_amp1_engage); |
456 | static DEVICE_ATTR(band_1_gain, S_IWUGO | S_IRUGO, pod_get_band_1_gain, | 456 | static DEVICE_ATTR(band_1_gain, S_IWUSR | S_IRUGO, pod_get_band_1_gain, |
457 | pod_set_band_1_gain); | 457 | pod_set_band_1_gain); |
458 | static DEVICE_ATTR2(band_2_gain__bass, band_2_gain, S_IWUGO | S_IRUGO, | 458 | static DEVICE_ATTR2(band_2_gain__bass, band_2_gain, S_IWUSR | S_IRUGO, |
459 | pod_get_band_2_gain__bass, pod_set_band_2_gain__bass); | 459 | pod_get_band_2_gain__bass, pod_set_band_2_gain__bass); |
460 | static DEVICE_ATTR(band_2_gain, S_IWUGO | S_IRUGO, pod_get_band_2_gain, | 460 | static DEVICE_ATTR(band_2_gain, S_IWUSR | S_IRUGO, pod_get_band_2_gain, |
461 | pod_set_band_2_gain); | 461 | pod_set_band_2_gain); |
462 | static DEVICE_ATTR2(band_3_gain__bass, band_3_gain, S_IWUGO | S_IRUGO, | 462 | static DEVICE_ATTR2(band_3_gain__bass, band_3_gain, S_IWUSR | S_IRUGO, |
463 | pod_get_band_3_gain__bass, pod_set_band_3_gain__bass); | 463 | pod_get_band_3_gain__bass, pod_set_band_3_gain__bass); |
464 | static DEVICE_ATTR(band_3_gain, S_IWUGO | S_IRUGO, pod_get_band_3_gain, | 464 | static DEVICE_ATTR(band_3_gain, S_IWUSR | S_IRUGO, pod_get_band_3_gain, |
465 | pod_set_band_3_gain); | 465 | pod_set_band_3_gain); |
466 | static DEVICE_ATTR2(band_4_gain__bass, band_4_gain, S_IWUGO | S_IRUGO, | 466 | static DEVICE_ATTR2(band_4_gain__bass, band_4_gain, S_IWUSR | S_IRUGO, |
467 | pod_get_band_4_gain__bass, pod_set_band_4_gain__bass); | 467 | pod_get_band_4_gain__bass, pod_set_band_4_gain__bass); |
468 | static DEVICE_ATTR2(band_5_gain__bass, band_5_gain, S_IWUGO | S_IRUGO, | 468 | static DEVICE_ATTR2(band_5_gain__bass, band_5_gain, S_IWUSR | S_IRUGO, |
469 | pod_get_band_5_gain__bass, pod_set_band_5_gain__bass); | 469 | pod_get_band_5_gain__bass, pod_set_band_5_gain__bass); |
470 | static DEVICE_ATTR(band_4_gain, S_IWUGO | S_IRUGO, pod_get_band_4_gain, | 470 | static DEVICE_ATTR(band_4_gain, S_IWUSR | S_IRUGO, pod_get_band_4_gain, |
471 | pod_set_band_4_gain); | 471 | pod_set_band_4_gain); |
472 | static DEVICE_ATTR2(band_6_gain__bass, band_6_gain, S_IWUGO | S_IRUGO, | 472 | static DEVICE_ATTR2(band_6_gain__bass, band_6_gain, S_IWUSR | S_IRUGO, |
473 | pod_get_band_6_gain__bass, pod_set_band_6_gain__bass); | 473 | pod_get_band_6_gain__bass, pod_set_band_6_gain__bass); |
474 | static DEVICE_ATTR(body, S_IRUGO, variax_get_body, line6_nop_write); | 474 | static DEVICE_ATTR(body, S_IRUGO, variax_get_body, line6_nop_write); |
475 | static DEVICE_ATTR(pickup1_enable, S_IRUGO, variax_get_pickup1_enable, | 475 | static DEVICE_ATTR(pickup1_enable, S_IRUGO, variax_get_pickup1_enable, |
diff --git a/drivers/staging/line6/midi.c b/drivers/staging/line6/midi.c index 4304dfe6c166..ab67e889d2c4 100644 --- a/drivers/staging/line6/midi.c +++ b/drivers/staging/line6/midi.c | |||
@@ -350,9 +350,9 @@ static ssize_t midi_set_midi_mask_receive(struct device *dev, | |||
350 | return count; | 350 | return count; |
351 | } | 351 | } |
352 | 352 | ||
353 | static DEVICE_ATTR(midi_mask_transmit, S_IWUGO | S_IRUGO, | 353 | static DEVICE_ATTR(midi_mask_transmit, S_IWUSR | S_IRUGO, |
354 | midi_get_midi_mask_transmit, midi_set_midi_mask_transmit); | 354 | midi_get_midi_mask_transmit, midi_set_midi_mask_transmit); |
355 | static DEVICE_ATTR(midi_mask_receive, S_IWUGO | S_IRUGO, | 355 | static DEVICE_ATTR(midi_mask_receive, S_IWUSR | S_IRUGO, |
356 | midi_get_midi_mask_receive, midi_set_midi_mask_receive); | 356 | midi_get_midi_mask_receive, midi_set_midi_mask_receive); |
357 | 357 | ||
358 | /* MIDI device destructor */ | 358 | /* MIDI device destructor */ |
diff --git a/drivers/staging/line6/pcm.c b/drivers/staging/line6/pcm.c index e54770e34d2e..b9c55f9eb501 100644 --- a/drivers/staging/line6/pcm.c +++ b/drivers/staging/line6/pcm.c | |||
@@ -79,9 +79,9 @@ static ssize_t pcm_set_impulse_period(struct device *dev, | |||
79 | return count; | 79 | return count; |
80 | } | 80 | } |
81 | 81 | ||
82 | static DEVICE_ATTR(impulse_volume, S_IWUGO | S_IRUGO, pcm_get_impulse_volume, | 82 | static DEVICE_ATTR(impulse_volume, S_IWUSR | S_IRUGO, pcm_get_impulse_volume, |
83 | pcm_set_impulse_volume); | 83 | pcm_set_impulse_volume); |
84 | static DEVICE_ATTR(impulse_period, S_IWUGO | S_IRUGO, pcm_get_impulse_period, | 84 | static DEVICE_ATTR(impulse_period, S_IWUSR | S_IRUGO, pcm_get_impulse_period, |
85 | pcm_set_impulse_period); | 85 | pcm_set_impulse_period); |
86 | 86 | ||
87 | #endif | 87 | #endif |
diff --git a/drivers/staging/line6/pod.c b/drivers/staging/line6/pod.c index 22e2cedcacf7..d9b30212585c 100644 --- a/drivers/staging/line6/pod.c +++ b/drivers/staging/line6/pod.c | |||
@@ -1051,48 +1051,48 @@ POD_GET_SYSTEM_PARAM(tuner_pitch, 1); | |||
1051 | #undef GET_SYSTEM_PARAM | 1051 | #undef GET_SYSTEM_PARAM |
1052 | 1052 | ||
1053 | /* POD special files: */ | 1053 | /* POD special files: */ |
1054 | static DEVICE_ATTR(channel, S_IWUGO | S_IRUGO, pod_get_channel, | 1054 | static DEVICE_ATTR(channel, S_IWUSR | S_IRUGO, pod_get_channel, |
1055 | pod_set_channel); | 1055 | pod_set_channel); |
1056 | static DEVICE_ATTR(clip, S_IRUGO, pod_wait_for_clip, line6_nop_write); | 1056 | static DEVICE_ATTR(clip, S_IRUGO, pod_wait_for_clip, line6_nop_write); |
1057 | static DEVICE_ATTR(device_id, S_IRUGO, pod_get_device_id, line6_nop_write); | 1057 | static DEVICE_ATTR(device_id, S_IRUGO, pod_get_device_id, line6_nop_write); |
1058 | static DEVICE_ATTR(dirty, S_IRUGO, pod_get_dirty, line6_nop_write); | 1058 | static DEVICE_ATTR(dirty, S_IRUGO, pod_get_dirty, line6_nop_write); |
1059 | static DEVICE_ATTR(dump, S_IWUGO | S_IRUGO, pod_get_dump, pod_set_dump); | 1059 | static DEVICE_ATTR(dump, S_IWUSR | S_IRUGO, pod_get_dump, pod_set_dump); |
1060 | static DEVICE_ATTR(dump_buf, S_IWUGO | S_IRUGO, pod_get_dump_buf, | 1060 | static DEVICE_ATTR(dump_buf, S_IWUSR | S_IRUGO, pod_get_dump_buf, |
1061 | pod_set_dump_buf); | 1061 | pod_set_dump_buf); |
1062 | static DEVICE_ATTR(finish, S_IWUGO, line6_nop_read, pod_set_finish); | 1062 | static DEVICE_ATTR(finish, S_IWUSR, line6_nop_read, pod_set_finish); |
1063 | static DEVICE_ATTR(firmware_version, S_IRUGO, pod_get_firmware_version, | 1063 | static DEVICE_ATTR(firmware_version, S_IRUGO, pod_get_firmware_version, |
1064 | line6_nop_write); | 1064 | line6_nop_write); |
1065 | static DEVICE_ATTR(midi_postprocess, S_IWUGO | S_IRUGO, | 1065 | static DEVICE_ATTR(midi_postprocess, S_IWUSR | S_IRUGO, |
1066 | pod_get_midi_postprocess, pod_set_midi_postprocess); | 1066 | pod_get_midi_postprocess, pod_set_midi_postprocess); |
1067 | static DEVICE_ATTR(monitor_level, S_IWUGO | S_IRUGO, pod_get_monitor_level, | 1067 | static DEVICE_ATTR(monitor_level, S_IWUSR | S_IRUGO, pod_get_monitor_level, |
1068 | pod_set_monitor_level); | 1068 | pod_set_monitor_level); |
1069 | static DEVICE_ATTR(name, S_IRUGO, pod_get_name, line6_nop_write); | 1069 | static DEVICE_ATTR(name, S_IRUGO, pod_get_name, line6_nop_write); |
1070 | static DEVICE_ATTR(name_buf, S_IRUGO, pod_get_name_buf, line6_nop_write); | 1070 | static DEVICE_ATTR(name_buf, S_IRUGO, pod_get_name_buf, line6_nop_write); |
1071 | static DEVICE_ATTR(retrieve_amp_setup, S_IWUGO, line6_nop_read, | 1071 | static DEVICE_ATTR(retrieve_amp_setup, S_IWUSR, line6_nop_read, |
1072 | pod_set_retrieve_amp_setup); | 1072 | pod_set_retrieve_amp_setup); |
1073 | static DEVICE_ATTR(retrieve_channel, S_IWUGO, line6_nop_read, | 1073 | static DEVICE_ATTR(retrieve_channel, S_IWUSR, line6_nop_read, |
1074 | pod_set_retrieve_channel); | 1074 | pod_set_retrieve_channel); |
1075 | static DEVICE_ATTR(retrieve_effects_setup, S_IWUGO, line6_nop_read, | 1075 | static DEVICE_ATTR(retrieve_effects_setup, S_IWUSR, line6_nop_read, |
1076 | pod_set_retrieve_effects_setup); | 1076 | pod_set_retrieve_effects_setup); |
1077 | static DEVICE_ATTR(routing, S_IWUGO | S_IRUGO, pod_get_routing, | 1077 | static DEVICE_ATTR(routing, S_IWUSR | S_IRUGO, pod_get_routing, |
1078 | pod_set_routing); | 1078 | pod_set_routing); |
1079 | static DEVICE_ATTR(serial_number, S_IRUGO, pod_get_serial_number, | 1079 | static DEVICE_ATTR(serial_number, S_IRUGO, pod_get_serial_number, |
1080 | line6_nop_write); | 1080 | line6_nop_write); |
1081 | static DEVICE_ATTR(store_amp_setup, S_IWUGO, line6_nop_read, | 1081 | static DEVICE_ATTR(store_amp_setup, S_IWUSR, line6_nop_read, |
1082 | pod_set_store_amp_setup); | 1082 | pod_set_store_amp_setup); |
1083 | static DEVICE_ATTR(store_channel, S_IWUGO, line6_nop_read, | 1083 | static DEVICE_ATTR(store_channel, S_IWUSR, line6_nop_read, |
1084 | pod_set_store_channel); | 1084 | pod_set_store_channel); |
1085 | static DEVICE_ATTR(store_effects_setup, S_IWUGO, line6_nop_read, | 1085 | static DEVICE_ATTR(store_effects_setup, S_IWUSR, line6_nop_read, |
1086 | pod_set_store_effects_setup); | 1086 | pod_set_store_effects_setup); |
1087 | static DEVICE_ATTR(tuner_freq, S_IWUGO | S_IRUGO, pod_get_tuner_freq, | 1087 | static DEVICE_ATTR(tuner_freq, S_IWUSR | S_IRUGO, pod_get_tuner_freq, |
1088 | pod_set_tuner_freq); | 1088 | pod_set_tuner_freq); |
1089 | static DEVICE_ATTR(tuner_mute, S_IWUGO | S_IRUGO, pod_get_tuner_mute, | 1089 | static DEVICE_ATTR(tuner_mute, S_IWUSR | S_IRUGO, pod_get_tuner_mute, |
1090 | pod_set_tuner_mute); | 1090 | pod_set_tuner_mute); |
1091 | static DEVICE_ATTR(tuner_note, S_IRUGO, pod_get_tuner_note, line6_nop_write); | 1091 | static DEVICE_ATTR(tuner_note, S_IRUGO, pod_get_tuner_note, line6_nop_write); |
1092 | static DEVICE_ATTR(tuner_pitch, S_IRUGO, pod_get_tuner_pitch, line6_nop_write); | 1092 | static DEVICE_ATTR(tuner_pitch, S_IRUGO, pod_get_tuner_pitch, line6_nop_write); |
1093 | 1093 | ||
1094 | #ifdef CONFIG_LINE6_USB_RAW | 1094 | #ifdef CONFIG_LINE6_USB_RAW |
1095 | static DEVICE_ATTR(raw, S_IWUGO, line6_nop_read, line6_set_raw); | 1095 | static DEVICE_ATTR(raw, S_IWUSR, line6_nop_read, line6_set_raw); |
1096 | #endif | 1096 | #endif |
1097 | 1097 | ||
1098 | /* control info callback */ | 1098 | /* control info callback */ |
diff --git a/drivers/staging/line6/toneport.c b/drivers/staging/line6/toneport.c index 6a10b0f9749a..879e6992bbc6 100644 --- a/drivers/staging/line6/toneport.c +++ b/drivers/staging/line6/toneport.c | |||
@@ -154,9 +154,9 @@ static ssize_t toneport_set_led_green(struct device *dev, | |||
154 | return count; | 154 | return count; |
155 | } | 155 | } |
156 | 156 | ||
157 | static DEVICE_ATTR(led_red, S_IWUGO | S_IRUGO, line6_nop_read, | 157 | static DEVICE_ATTR(led_red, S_IWUSR | S_IRUGO, line6_nop_read, |
158 | toneport_set_led_red); | 158 | toneport_set_led_red); |
159 | static DEVICE_ATTR(led_green, S_IWUGO | S_IRUGO, line6_nop_read, | 159 | static DEVICE_ATTR(led_green, S_IWUSR | S_IRUGO, line6_nop_read, |
160 | toneport_set_led_green); | 160 | toneport_set_led_green); |
161 | 161 | ||
162 | static int toneport_send_cmd(struct usb_device *usbdev, int cmd1, int cmd2) | 162 | static int toneport_send_cmd(struct usb_device *usbdev, int cmd1, int cmd2) |
diff --git a/drivers/staging/line6/variax.c b/drivers/staging/line6/variax.c index 894eee7f2317..81241cdf1be9 100644 --- a/drivers/staging/line6/variax.c +++ b/drivers/staging/line6/variax.c | |||
@@ -549,21 +549,21 @@ static ssize_t variax_set_raw2(struct device *dev, | |||
549 | #endif | 549 | #endif |
550 | 550 | ||
551 | /* Variax workbench special files: */ | 551 | /* Variax workbench special files: */ |
552 | static DEVICE_ATTR(model, S_IWUGO | S_IRUGO, variax_get_model, | 552 | static DEVICE_ATTR(model, S_IWUSR | S_IRUGO, variax_get_model, |
553 | variax_set_model); | 553 | variax_set_model); |
554 | static DEVICE_ATTR(volume, S_IWUGO | S_IRUGO, variax_get_volume, | 554 | static DEVICE_ATTR(volume, S_IWUSR | S_IRUGO, variax_get_volume, |
555 | variax_set_volume); | 555 | variax_set_volume); |
556 | static DEVICE_ATTR(tone, S_IWUGO | S_IRUGO, variax_get_tone, variax_set_tone); | 556 | static DEVICE_ATTR(tone, S_IWUSR | S_IRUGO, variax_get_tone, variax_set_tone); |
557 | static DEVICE_ATTR(name, S_IRUGO, variax_get_name, line6_nop_write); | 557 | static DEVICE_ATTR(name, S_IRUGO, variax_get_name, line6_nop_write); |
558 | static DEVICE_ATTR(bank, S_IRUGO, variax_get_bank, line6_nop_write); | 558 | static DEVICE_ATTR(bank, S_IRUGO, variax_get_bank, line6_nop_write); |
559 | static DEVICE_ATTR(dump, S_IRUGO, variax_get_dump, line6_nop_write); | 559 | static DEVICE_ATTR(dump, S_IRUGO, variax_get_dump, line6_nop_write); |
560 | static DEVICE_ATTR(active, S_IWUGO | S_IRUGO, variax_get_active, | 560 | static DEVICE_ATTR(active, S_IWUSR | S_IRUGO, variax_get_active, |
561 | variax_set_active); | 561 | variax_set_active); |
562 | static DEVICE_ATTR(guitar, S_IRUGO, variax_get_guitar, line6_nop_write); | 562 | static DEVICE_ATTR(guitar, S_IRUGO, variax_get_guitar, line6_nop_write); |
563 | 563 | ||
564 | #ifdef CONFIG_LINE6_USB_RAW | 564 | #ifdef CONFIG_LINE6_USB_RAW |
565 | static DEVICE_ATTR(raw, S_IWUGO, line6_nop_read, line6_set_raw); | 565 | static DEVICE_ATTR(raw, S_IWUSR, line6_nop_read, line6_set_raw); |
566 | static DEVICE_ATTR(raw2, S_IWUGO, line6_nop_read, variax_set_raw2); | 566 | static DEVICE_ATTR(raw2, S_IWUSR, line6_nop_read, variax_set_raw2); |
567 | #endif | 567 | #endif |
568 | 568 | ||
569 | /* | 569 | /* |
diff --git a/drivers/staging/quickstart/quickstart.c b/drivers/staging/quickstart/quickstart.c index d746715d3d89..d83bec876d2e 100644 --- a/drivers/staging/quickstart/quickstart.c +++ b/drivers/staging/quickstart/quickstart.c | |||
@@ -355,7 +355,6 @@ static int quickstart_acpi_remove(struct acpi_device *device, int type) | |||
355 | static void quickstart_exit(void) | 355 | static void quickstart_exit(void) |
356 | { | 356 | { |
357 | input_unregister_device(quickstart_input); | 357 | input_unregister_device(quickstart_input); |
358 | input_free_device(quickstart_input); | ||
359 | 358 | ||
360 | device_remove_file(&pf_device->dev, &dev_attr_pressed_button); | 359 | device_remove_file(&pf_device->dev, &dev_attr_pressed_button); |
361 | device_remove_file(&pf_device->dev, &dev_attr_buttons); | 360 | device_remove_file(&pf_device->dev, &dev_attr_buttons); |
@@ -375,6 +374,7 @@ static int __init quickstart_init_input(void) | |||
375 | { | 374 | { |
376 | struct quickstart_btn **ptr = &quickstart_data.btn_lst; | 375 | struct quickstart_btn **ptr = &quickstart_data.btn_lst; |
377 | int count; | 376 | int count; |
377 | int ret; | ||
378 | 378 | ||
379 | quickstart_input = input_allocate_device(); | 379 | quickstart_input = input_allocate_device(); |
380 | 380 | ||
@@ -391,7 +391,13 @@ static int __init quickstart_init_input(void) | |||
391 | ptr = &((*ptr)->next); | 391 | ptr = &((*ptr)->next); |
392 | } | 392 | } |
393 | 393 | ||
394 | return input_register_device(quickstart_input); | 394 | ret = input_register_device(quickstart_input); |
395 | if (ret) { | ||
396 | input_free_device(quickstart_input); | ||
397 | return ret; | ||
398 | } | ||
399 | |||
400 | return 0; | ||
395 | } | 401 | } |
396 | 402 | ||
397 | static int __init quickstart_init(void) | 403 | static int __init quickstart_init(void) |
diff --git a/drivers/staging/rt2860/usb_main_dev.c b/drivers/staging/rt2860/usb_main_dev.c index ddacfc6c4861..cd15daae5412 100644 --- a/drivers/staging/rt2860/usb_main_dev.c +++ b/drivers/staging/rt2860/usb_main_dev.c | |||
@@ -182,6 +182,7 @@ struct usb_device_id rtusb_usb_id[] = { | |||
182 | {USB_DEVICE(0x2001, 0x3C09)}, /* D-Link */ | 182 | {USB_DEVICE(0x2001, 0x3C09)}, /* D-Link */ |
183 | {USB_DEVICE(0x2001, 0x3C0A)}, /* D-Link 3072 */ | 183 | {USB_DEVICE(0x2001, 0x3C0A)}, /* D-Link 3072 */ |
184 | {USB_DEVICE(0x2019, 0xED14)}, /* Planex Communications, Inc. */ | 184 | {USB_DEVICE(0x2019, 0xED14)}, /* Planex Communications, Inc. */ |
185 | {USB_DEVICE(0x0411, 0x015D)}, /* Buffalo Airstation WLI-UC-GN */ | ||
185 | {} /* Terminating entry */ | 186 | {} /* Terminating entry */ |
186 | }; | 187 | }; |
187 | 188 | ||
diff --git a/drivers/staging/rtl8187se/r8185b_init.c b/drivers/staging/rtl8187se/r8185b_init.c index 46000d72f4c4..3bdf9b31cc4e 100644 --- a/drivers/staging/rtl8187se/r8185b_init.c +++ b/drivers/staging/rtl8187se/r8185b_init.c | |||
@@ -264,8 +264,12 @@ HwHSSIThreeWire( | |||
264 | 264 | ||
265 | udelay(10); | 265 | udelay(10); |
266 | } | 266 | } |
267 | if (TryCnt == TC_3W_POLL_MAX_TRY_CNT) | 267 | if (TryCnt == TC_3W_POLL_MAX_TRY_CNT) { |
268 | panic("HwThreeWire(): CmdReg: %#X RE|WE bits are not clear!!\n", u1bTmp); | 268 | printk(KERN_ERR "rtl8187se: HwThreeWire(): CmdReg:" |
269 | " %#X RE|WE bits are not clear!!\n", u1bTmp); | ||
270 | dump_stack(); | ||
271 | return 0; | ||
272 | } | ||
269 | 273 | ||
270 | /* RTL8187S HSSI Read/Write Function */ | 274 | /* RTL8187S HSSI Read/Write Function */ |
271 | u1bTmp = read_nic_byte(dev, RF_SW_CONFIG); | 275 | u1bTmp = read_nic_byte(dev, RF_SW_CONFIG); |
@@ -298,13 +302,23 @@ HwHSSIThreeWire( | |||
298 | int idx; | 302 | int idx; |
299 | int ByteCnt = nDataBufBitCnt / 8; | 303 | int ByteCnt = nDataBufBitCnt / 8; |
300 | /* printk("%d\n",nDataBufBitCnt); */ | 304 | /* printk("%d\n",nDataBufBitCnt); */ |
301 | if ((nDataBufBitCnt % 8) != 0) | 305 | if ((nDataBufBitCnt % 8) != 0) { |
302 | panic("HwThreeWire(): nDataBufBitCnt(%d) should be multiple of 8!!!\n", | 306 | printk(KERN_ERR "rtl8187se: " |
303 | nDataBufBitCnt); | 307 | "HwThreeWire(): nDataBufBitCnt(%d)" |
308 | " should be multiple of 8!!!\n", | ||
309 | nDataBufBitCnt); | ||
310 | dump_stack(); | ||
311 | nDataBufBitCnt += 8; | ||
312 | nDataBufBitCnt &= ~7; | ||
313 | } | ||
304 | 314 | ||
305 | if (nDataBufBitCnt > 64) | 315 | if (nDataBufBitCnt > 64) { |
306 | panic("HwThreeWire(): nDataBufBitCnt(%d) should <= 64!!!\n", | 316 | printk(KERN_ERR "rtl8187se: HwThreeWire():" |
307 | nDataBufBitCnt); | 317 | " nDataBufBitCnt(%d) should <= 64!!!\n", |
318 | nDataBufBitCnt); | ||
319 | dump_stack(); | ||
320 | nDataBufBitCnt = 64; | ||
321 | } | ||
308 | 322 | ||
309 | for (idx = 0; idx < ByteCnt; idx++) | 323 | for (idx = 0; idx < ByteCnt; idx++) |
310 | write_nic_byte(dev, (SW_3W_DB0+idx), *(pDataBuf+idx)); | 324 | write_nic_byte(dev, (SW_3W_DB0+idx), *(pDataBuf+idx)); |
diff --git a/drivers/staging/rtl8712/usb_halinit.c b/drivers/staging/rtl8712/usb_halinit.c index f6569dce3012..0e9483bbabe1 100644 --- a/drivers/staging/rtl8712/usb_halinit.c +++ b/drivers/staging/rtl8712/usb_halinit.c | |||
@@ -37,7 +37,7 @@ u8 r8712_usb_hal_bus_init(struct _adapter *padapter) | |||
37 | { | 37 | { |
38 | u8 val8 = 0; | 38 | u8 val8 = 0; |
39 | u8 ret = _SUCCESS; | 39 | u8 ret = _SUCCESS; |
40 | u8 PollingCnt = 20; | 40 | int PollingCnt = 20; |
41 | struct registry_priv *pregistrypriv = &padapter->registrypriv; | 41 | struct registry_priv *pregistrypriv = &padapter->registrypriv; |
42 | 42 | ||
43 | if (pregistrypriv->chip_version == RTL8712_FPGA) { | 43 | if (pregistrypriv->chip_version == RTL8712_FPGA) { |
diff --git a/drivers/staging/samsung-laptop/samsung-laptop.c b/drivers/staging/samsung-laptop/samsung-laptop.c index eb44b60e1eb5..ac2bf11e1119 100644 --- a/drivers/staging/samsung-laptop/samsung-laptop.c +++ b/drivers/staging/samsung-laptop/samsung-laptop.c | |||
@@ -356,7 +356,7 @@ static ssize_t set_silent_state(struct device *dev, | |||
356 | } | 356 | } |
357 | return count; | 357 | return count; |
358 | } | 358 | } |
359 | static DEVICE_ATTR(silent, S_IWUGO | S_IRUGO, | 359 | static DEVICE_ATTR(silent, S_IWUSR | S_IRUGO, |
360 | get_silent_state, set_silent_state); | 360 | get_silent_state, set_silent_state); |
361 | 361 | ||
362 | 362 | ||
diff --git a/drivers/staging/speakup/fakekey.c b/drivers/staging/speakup/fakekey.c index adb93f21c0d6..65b231178f05 100644 --- a/drivers/staging/speakup/fakekey.c +++ b/drivers/staging/speakup/fakekey.c | |||
@@ -62,7 +62,6 @@ void speakup_remove_virtual_keyboard(void) | |||
62 | { | 62 | { |
63 | if (virt_keyboard != NULL) { | 63 | if (virt_keyboard != NULL) { |
64 | input_unregister_device(virt_keyboard); | 64 | input_unregister_device(virt_keyboard); |
65 | input_free_device(virt_keyboard); | ||
66 | virt_keyboard = NULL; | 65 | virt_keyboard = NULL; |
67 | } | 66 | } |
68 | } | 67 | } |
diff --git a/drivers/staging/spectra/ffsport.c b/drivers/staging/spectra/ffsport.c index c7932da03c56..63a9d0adf32d 100644 --- a/drivers/staging/spectra/ffsport.c +++ b/drivers/staging/spectra/ffsport.c | |||
@@ -656,7 +656,7 @@ static int SBD_setup_device(struct spectra_nand_dev *dev, int which) | |||
656 | /* Here we force report 512 byte hardware sector size to Kernel */ | 656 | /* Here we force report 512 byte hardware sector size to Kernel */ |
657 | blk_queue_logical_block_size(dev->queue, 512); | 657 | blk_queue_logical_block_size(dev->queue, 512); |
658 | 658 | ||
659 | blk_queue_ordered(dev->queue, QUEUE_ORDERED_DRAIN_FLUSH); | 659 | blk_queue_flush(dev->queue, REQ_FLUSH); |
660 | 660 | ||
661 | dev->thread = kthread_run(spectra_trans_thread, dev, "nand_thd"); | 661 | dev->thread = kthread_run(spectra_trans_thread, dev, "nand_thd"); |
662 | if (IS_ERR(dev->thread)) { | 662 | if (IS_ERR(dev->thread)) { |
diff --git a/drivers/staging/udlfb/udlfb.c b/drivers/staging/udlfb/udlfb.c index fed25105970a..b7ac16005265 100644 --- a/drivers/staging/udlfb/udlfb.c +++ b/drivers/staging/udlfb/udlfb.c | |||
@@ -1441,7 +1441,7 @@ static struct device_attribute fb_device_attrs[] = { | |||
1441 | __ATTR_RO(metrics_bytes_identical), | 1441 | __ATTR_RO(metrics_bytes_identical), |
1442 | __ATTR_RO(metrics_bytes_sent), | 1442 | __ATTR_RO(metrics_bytes_sent), |
1443 | __ATTR_RO(metrics_cpu_kcycles_used), | 1443 | __ATTR_RO(metrics_cpu_kcycles_used), |
1444 | __ATTR(metrics_reset, S_IWUGO, NULL, metrics_reset_store), | 1444 | __ATTR(metrics_reset, S_IWUSR, NULL, metrics_reset_store), |
1445 | }; | 1445 | }; |
1446 | 1446 | ||
1447 | /* | 1447 | /* |
diff --git a/drivers/staging/winbond/sysdef.h b/drivers/staging/winbond/sysdef.h index 9195adf98e14..d0d71f69bc8c 100644 --- a/drivers/staging/winbond/sysdef.h +++ b/drivers/staging/winbond/sysdef.h | |||
@@ -2,6 +2,9 @@ | |||
2 | 2 | ||
3 | #ifndef SYS_DEF_H | 3 | #ifndef SYS_DEF_H |
4 | #define SYS_DEF_H | 4 | #define SYS_DEF_H |
5 | |||
6 | #include <linux/delay.h> | ||
7 | |||
5 | #define WB_LINUX | 8 | #define WB_LINUX |
6 | #define WB_LINUX_WPA_PSK | 9 | #define WB_LINUX_WPA_PSK |
7 | 10 | ||
diff --git a/drivers/staging/zram/zram_sysfs.c b/drivers/staging/zram/zram_sysfs.c index 6c574a994d11..6b3cf00b0ff4 100644 --- a/drivers/staging/zram/zram_sysfs.c +++ b/drivers/staging/zram/zram_sysfs.c | |||
@@ -189,10 +189,10 @@ static ssize_t mem_used_total_show(struct device *dev, | |||
189 | return sprintf(buf, "%llu\n", val); | 189 | return sprintf(buf, "%llu\n", val); |
190 | } | 190 | } |
191 | 191 | ||
192 | static DEVICE_ATTR(disksize, S_IRUGO | S_IWUGO, | 192 | static DEVICE_ATTR(disksize, S_IRUGO | S_IWUSR, |
193 | disksize_show, disksize_store); | 193 | disksize_show, disksize_store); |
194 | static DEVICE_ATTR(initstate, S_IRUGO, initstate_show, NULL); | 194 | static DEVICE_ATTR(initstate, S_IRUGO, initstate_show, NULL); |
195 | static DEVICE_ATTR(reset, S_IWUGO, NULL, reset_store); | 195 | static DEVICE_ATTR(reset, S_IWUSR, NULL, reset_store); |
196 | static DEVICE_ATTR(num_reads, S_IRUGO, num_reads_show, NULL); | 196 | static DEVICE_ATTR(num_reads, S_IRUGO, num_reads_show, NULL); |
197 | static DEVICE_ATTR(num_writes, S_IRUGO, num_writes_show, NULL); | 197 | static DEVICE_ATTR(num_writes, S_IRUGO, num_writes_show, NULL); |
198 | static DEVICE_ATTR(invalid_io, S_IRUGO, invalid_io_show, NULL); | 198 | static DEVICE_ATTR(invalid_io, S_IRUGO, invalid_io_show, NULL); |
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index c05c5af5aa04..35480dd57a30 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c | |||
@@ -559,6 +559,9 @@ void __tty_hangup(struct tty_struct *tty) | |||
559 | 559 | ||
560 | tty_lock(); | 560 | tty_lock(); |
561 | 561 | ||
562 | /* some functions below drop BTM, so we need this bit */ | ||
563 | set_bit(TTY_HUPPING, &tty->flags); | ||
564 | |||
562 | /* inuse_filps is protected by the single tty lock, | 565 | /* inuse_filps is protected by the single tty lock, |
563 | this really needs to change if we want to flush the | 566 | this really needs to change if we want to flush the |
564 | workqueue with the lock held */ | 567 | workqueue with the lock held */ |
@@ -578,6 +581,10 @@ void __tty_hangup(struct tty_struct *tty) | |||
578 | } | 581 | } |
579 | spin_unlock(&tty_files_lock); | 582 | spin_unlock(&tty_files_lock); |
580 | 583 | ||
584 | /* | ||
585 | * it drops BTM and thus races with reopen | ||
586 | * we protect the race by TTY_HUPPING | ||
587 | */ | ||
581 | tty_ldisc_hangup(tty); | 588 | tty_ldisc_hangup(tty); |
582 | 589 | ||
583 | read_lock(&tasklist_lock); | 590 | read_lock(&tasklist_lock); |
@@ -615,7 +622,6 @@ void __tty_hangup(struct tty_struct *tty) | |||
615 | tty->session = NULL; | 622 | tty->session = NULL; |
616 | tty->pgrp = NULL; | 623 | tty->pgrp = NULL; |
617 | tty->ctrl_status = 0; | 624 | tty->ctrl_status = 0; |
618 | set_bit(TTY_HUPPED, &tty->flags); | ||
619 | spin_unlock_irqrestore(&tty->ctrl_lock, flags); | 625 | spin_unlock_irqrestore(&tty->ctrl_lock, flags); |
620 | 626 | ||
621 | /* Account for the p->signal references we killed */ | 627 | /* Account for the p->signal references we killed */ |
@@ -641,6 +647,7 @@ void __tty_hangup(struct tty_struct *tty) | |||
641 | * can't yet guarantee all that. | 647 | * can't yet guarantee all that. |
642 | */ | 648 | */ |
643 | set_bit(TTY_HUPPED, &tty->flags); | 649 | set_bit(TTY_HUPPED, &tty->flags); |
650 | clear_bit(TTY_HUPPING, &tty->flags); | ||
644 | tty_ldisc_enable(tty); | 651 | tty_ldisc_enable(tty); |
645 | 652 | ||
646 | tty_unlock(); | 653 | tty_unlock(); |
@@ -1310,7 +1317,9 @@ static int tty_reopen(struct tty_struct *tty) | |||
1310 | { | 1317 | { |
1311 | struct tty_driver *driver = tty->driver; | 1318 | struct tty_driver *driver = tty->driver; |
1312 | 1319 | ||
1313 | if (test_bit(TTY_CLOSING, &tty->flags)) | 1320 | if (test_bit(TTY_CLOSING, &tty->flags) || |
1321 | test_bit(TTY_HUPPING, &tty->flags) || | ||
1322 | test_bit(TTY_LDISC_CHANGING, &tty->flags)) | ||
1314 | return -EIO; | 1323 | return -EIO; |
1315 | 1324 | ||
1316 | if (driver->type == TTY_DRIVER_TYPE_PTY && | 1325 | if (driver->type == TTY_DRIVER_TYPE_PTY && |
diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c index d8e96b005023..4214d58276f7 100644 --- a/drivers/tty/tty_ldisc.c +++ b/drivers/tty/tty_ldisc.c | |||
@@ -454,6 +454,8 @@ static int tty_ldisc_open(struct tty_struct *tty, struct tty_ldisc *ld) | |||
454 | /* BTM here locks versus a hangup event */ | 454 | /* BTM here locks versus a hangup event */ |
455 | WARN_ON(!tty_locked()); | 455 | WARN_ON(!tty_locked()); |
456 | ret = ld->ops->open(tty); | 456 | ret = ld->ops->open(tty); |
457 | if (ret) | ||
458 | clear_bit(TTY_LDISC_OPEN, &tty->flags); | ||
457 | return ret; | 459 | return ret; |
458 | } | 460 | } |
459 | return 0; | 461 | return 0; |
diff --git a/drivers/uio/uio.c b/drivers/uio/uio.c index a858d2b87b94..51fe1795d5a8 100644 --- a/drivers/uio/uio.c +++ b/drivers/uio/uio.c | |||
@@ -3,7 +3,7 @@ | |||
3 | * | 3 | * |
4 | * Copyright(C) 2005, Benedikt Spranger <b.spranger@linutronix.de> | 4 | * Copyright(C) 2005, Benedikt Spranger <b.spranger@linutronix.de> |
5 | * Copyright(C) 2005, Thomas Gleixner <tglx@linutronix.de> | 5 | * Copyright(C) 2005, Thomas Gleixner <tglx@linutronix.de> |
6 | * Copyright(C) 2006, Hans J. Koch <hjk@linutronix.de> | 6 | * Copyright(C) 2006, Hans J. Koch <hjk@hansjkoch.de> |
7 | * Copyright(C) 2006, Greg Kroah-Hartman <greg@kroah.com> | 7 | * Copyright(C) 2006, Greg Kroah-Hartman <greg@kroah.com> |
8 | * | 8 | * |
9 | * Userspace IO | 9 | * Userspace IO |
diff --git a/drivers/uio/uio_cif.c b/drivers/uio/uio_cif.c index a8ea2f19a0cc..a84a451159ed 100644 --- a/drivers/uio/uio_cif.c +++ b/drivers/uio/uio_cif.c | |||
@@ -1,7 +1,7 @@ | |||
1 | /* | 1 | /* |
2 | * UIO Hilscher CIF card driver | 2 | * UIO Hilscher CIF card driver |
3 | * | 3 | * |
4 | * (C) 2007 Hans J. Koch <hjk@linutronix.de> | 4 | * (C) 2007 Hans J. Koch <hjk@hansjkoch.de> |
5 | * Original code (C) 2005 Benedikt Spranger <b.spranger@linutronix.de> | 5 | * Original code (C) 2005 Benedikt Spranger <b.spranger@linutronix.de> |
6 | * | 6 | * |
7 | * Licensed under GPL version 2 only. | 7 | * Licensed under GPL version 2 only. |
diff --git a/drivers/uio/uio_netx.c b/drivers/uio/uio_netx.c index 5a18e9f7b836..5ffdb483b015 100644 --- a/drivers/uio/uio_netx.c +++ b/drivers/uio/uio_netx.c | |||
@@ -2,7 +2,7 @@ | |||
2 | * UIO driver for Hilscher NetX based fieldbus cards (cifX, comX). | 2 | * UIO driver for Hilscher NetX based fieldbus cards (cifX, comX). |
3 | * See http://www.hilscher.com for details. | 3 | * See http://www.hilscher.com for details. |
4 | * | 4 | * |
5 | * (C) 2007 Hans J. Koch <hjk@linutronix.de> | 5 | * (C) 2007 Hans J. Koch <hjk@hansjkoch.de> |
6 | * (C) 2008 Manuel Traut <manut@linutronix.de> | 6 | * (C) 2008 Manuel Traut <manut@linutronix.de> |
7 | * | 7 | * |
8 | * Licensed under GPL version 2 only. | 8 | * Licensed under GPL version 2 only. |
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 61800f77dac8..ced846ac4141 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c | |||
@@ -1330,6 +1330,8 @@ static int map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb, | |||
1330 | */ | 1330 | */ |
1331 | 1331 | ||
1332 | if (usb_endpoint_xfer_control(&urb->ep->desc)) { | 1332 | if (usb_endpoint_xfer_control(&urb->ep->desc)) { |
1333 | if (hcd->self.uses_pio_for_control) | ||
1334 | return ret; | ||
1333 | if (hcd->self.uses_dma) { | 1335 | if (hcd->self.uses_dma) { |
1334 | urb->setup_dma = dma_map_single( | 1336 | urb->setup_dma = dma_map_single( |
1335 | hcd->self.controller, | 1337 | hcd->self.controller, |
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index 01bb72b71832..655f3c9f88bf 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c | |||
@@ -161,6 +161,18 @@ static int ehci_pci_setup(struct usb_hcd *hcd) | |||
161 | if (pdev->revision < 0xa4) | 161 | if (pdev->revision < 0xa4) |
162 | ehci->no_selective_suspend = 1; | 162 | ehci->no_selective_suspend = 1; |
163 | break; | 163 | break; |
164 | |||
165 | /* MCP89 chips on the MacBookAir3,1 give EPROTO when | ||
166 | * fetching device descriptors unless LPM is disabled. | ||
167 | * There are also intermittent problems enumerating | ||
168 | * devices with PPCD enabled. | ||
169 | */ | ||
170 | case 0x0d9d: | ||
171 | ehci_info(ehci, "disable lpm/ppcd for nvidia mcp89"); | ||
172 | ehci->has_lpm = 0; | ||
173 | ehci->has_ppcd = 0; | ||
174 | ehci->command &= ~CMD_PPCEE; | ||
175 | break; | ||
164 | } | 176 | } |
165 | break; | 177 | break; |
166 | case PCI_VENDOR_ID_VIA: | 178 | case PCI_VENDOR_ID_VIA: |
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index fef5a1f9d483..5d963e350494 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c | |||
@@ -229,6 +229,13 @@ void xhci_ring_device(struct xhci_hcd *xhci, int slot_id) | |||
229 | static void xhci_disable_port(struct xhci_hcd *xhci, u16 wIndex, | 229 | static void xhci_disable_port(struct xhci_hcd *xhci, u16 wIndex, |
230 | u32 __iomem *addr, u32 port_status) | 230 | u32 __iomem *addr, u32 port_status) |
231 | { | 231 | { |
232 | /* Don't allow the USB core to disable SuperSpeed ports. */ | ||
233 | if (xhci->port_array[wIndex] == 0x03) { | ||
234 | xhci_dbg(xhci, "Ignoring request to disable " | ||
235 | "SuperSpeed port.\n"); | ||
236 | return; | ||
237 | } | ||
238 | |||
232 | /* Write 1 to disable the port */ | 239 | /* Write 1 to disable the port */ |
233 | xhci_writel(xhci, port_status | PORT_PE, addr); | 240 | xhci_writel(xhci, port_status | PORT_PE, addr); |
234 | port_status = xhci_readl(xhci, addr); | 241 | port_status = xhci_readl(xhci, addr); |
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index d178761c3981..0fae58ef8afe 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c | |||
@@ -1443,6 +1443,13 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci) | |||
1443 | xhci->dcbaa = NULL; | 1443 | xhci->dcbaa = NULL; |
1444 | 1444 | ||
1445 | scratchpad_free(xhci); | 1445 | scratchpad_free(xhci); |
1446 | |||
1447 | xhci->num_usb2_ports = 0; | ||
1448 | xhci->num_usb3_ports = 0; | ||
1449 | kfree(xhci->usb2_ports); | ||
1450 | kfree(xhci->usb3_ports); | ||
1451 | kfree(xhci->port_array); | ||
1452 | |||
1446 | xhci->page_size = 0; | 1453 | xhci->page_size = 0; |
1447 | xhci->page_shift = 0; | 1454 | xhci->page_shift = 0; |
1448 | xhci->bus_suspended = 0; | 1455 | xhci->bus_suspended = 0; |
@@ -1627,6 +1634,161 @@ static void xhci_set_hc_event_deq(struct xhci_hcd *xhci) | |||
1627 | &xhci->ir_set->erst_dequeue); | 1634 | &xhci->ir_set->erst_dequeue); |
1628 | } | 1635 | } |
1629 | 1636 | ||
1637 | static void xhci_add_in_port(struct xhci_hcd *xhci, unsigned int num_ports, | ||
1638 | u32 __iomem *addr, u8 major_revision) | ||
1639 | { | ||
1640 | u32 temp, port_offset, port_count; | ||
1641 | int i; | ||
1642 | |||
1643 | if (major_revision > 0x03) { | ||
1644 | xhci_warn(xhci, "Ignoring unknown port speed, " | ||
1645 | "Ext Cap %p, revision = 0x%x\n", | ||
1646 | addr, major_revision); | ||
1647 | /* Ignoring port protocol we can't understand. FIXME */ | ||
1648 | return; | ||
1649 | } | ||
1650 | |||
1651 | /* Port offset and count in the third dword, see section 7.2 */ | ||
1652 | temp = xhci_readl(xhci, addr + 2); | ||
1653 | port_offset = XHCI_EXT_PORT_OFF(temp); | ||
1654 | port_count = XHCI_EXT_PORT_COUNT(temp); | ||
1655 | xhci_dbg(xhci, "Ext Cap %p, port offset = %u, " | ||
1656 | "count = %u, revision = 0x%x\n", | ||
1657 | addr, port_offset, port_count, major_revision); | ||
1658 | /* Port count includes the current port offset */ | ||
1659 | if (port_offset == 0 || (port_offset + port_count - 1) > num_ports) | ||
1660 | /* WTF? "Valid values are ‘1’ to MaxPorts" */ | ||
1661 | return; | ||
1662 | port_offset--; | ||
1663 | for (i = port_offset; i < (port_offset + port_count); i++) { | ||
1664 | /* Duplicate entry. Ignore the port if the revisions differ. */ | ||
1665 | if (xhci->port_array[i] != 0) { | ||
1666 | xhci_warn(xhci, "Duplicate port entry, Ext Cap %p," | ||
1667 | " port %u\n", addr, i); | ||
1668 | xhci_warn(xhci, "Port was marked as USB %u, " | ||
1669 | "duplicated as USB %u\n", | ||
1670 | xhci->port_array[i], major_revision); | ||
1671 | /* Only adjust the roothub port counts if we haven't | ||
1672 | * found a similar duplicate. | ||
1673 | */ | ||
1674 | if (xhci->port_array[i] != major_revision && | ||
1675 | xhci->port_array[i] != (u8) -1) { | ||
1676 | if (xhci->port_array[i] == 0x03) | ||
1677 | xhci->num_usb3_ports--; | ||
1678 | else | ||
1679 | xhci->num_usb2_ports--; | ||
1680 | xhci->port_array[i] = (u8) -1; | ||
1681 | } | ||
1682 | /* FIXME: Should we disable the port? */ | ||
1683 | } | ||
1684 | xhci->port_array[i] = major_revision; | ||
1685 | if (major_revision == 0x03) | ||
1686 | xhci->num_usb3_ports++; | ||
1687 | else | ||
1688 | xhci->num_usb2_ports++; | ||
1689 | } | ||
1690 | /* FIXME: Should we disable ports not in the Extended Capabilities? */ | ||
1691 | } | ||
1692 | |||
1693 | /* | ||
1694 | * Scan the Extended Capabilities for the "Supported Protocol Capabilities" that | ||
1695 | * specify what speeds each port is supposed to be. We can't count on the port | ||
1696 | * speed bits in the PORTSC register being correct until a device is connected, | ||
1697 | * but we need to set up the two fake roothubs with the correct number of USB | ||
1698 | * 3.0 and USB 2.0 ports at host controller initialization time. | ||
1699 | */ | ||
1700 | static int xhci_setup_port_arrays(struct xhci_hcd *xhci, gfp_t flags) | ||
1701 | { | ||
1702 | u32 __iomem *addr; | ||
1703 | u32 offset; | ||
1704 | unsigned int num_ports; | ||
1705 | int i, port_index; | ||
1706 | |||
1707 | addr = &xhci->cap_regs->hcc_params; | ||
1708 | offset = XHCI_HCC_EXT_CAPS(xhci_readl(xhci, addr)); | ||
1709 | if (offset == 0) { | ||
1710 | xhci_err(xhci, "No Extended Capability registers, " | ||
1711 | "unable to set up roothub.\n"); | ||
1712 | return -ENODEV; | ||
1713 | } | ||
1714 | |||
1715 | num_ports = HCS_MAX_PORTS(xhci->hcs_params1); | ||
1716 | xhci->port_array = kzalloc(sizeof(*xhci->port_array)*num_ports, flags); | ||
1717 | if (!xhci->port_array) | ||
1718 | return -ENOMEM; | ||
1719 | |||
1720 | /* | ||
1721 | * For whatever reason, the first capability offset is from the | ||
1722 | * capability register base, not from the HCCPARAMS register. | ||
1723 | * See section 5.3.6 for offset calculation. | ||
1724 | */ | ||
1725 | addr = &xhci->cap_regs->hc_capbase + offset; | ||
1726 | while (1) { | ||
1727 | u32 cap_id; | ||
1728 | |||
1729 | cap_id = xhci_readl(xhci, addr); | ||
1730 | if (XHCI_EXT_CAPS_ID(cap_id) == XHCI_EXT_CAPS_PROTOCOL) | ||
1731 | xhci_add_in_port(xhci, num_ports, addr, | ||
1732 | (u8) XHCI_EXT_PORT_MAJOR(cap_id)); | ||
1733 | offset = XHCI_EXT_CAPS_NEXT(cap_id); | ||
1734 | if (!offset || (xhci->num_usb2_ports + xhci->num_usb3_ports) | ||
1735 | == num_ports) | ||
1736 | break; | ||
1737 | /* | ||
1738 | * Once you're into the Extended Capabilities, the offset is | ||
1739 | * always relative to the register holding the offset. | ||
1740 | */ | ||
1741 | addr += offset; | ||
1742 | } | ||
1743 | |||
1744 | if (xhci->num_usb2_ports == 0 && xhci->num_usb3_ports == 0) { | ||
1745 | xhci_warn(xhci, "No ports on the roothubs?\n"); | ||
1746 | return -ENODEV; | ||
1747 | } | ||
1748 | xhci_dbg(xhci, "Found %u USB 2.0 ports and %u USB 3.0 ports.\n", | ||
1749 | xhci->num_usb2_ports, xhci->num_usb3_ports); | ||
1750 | /* | ||
1751 | * Note we could have all USB 3.0 ports, or all USB 2.0 ports. | ||
1752 | * Not sure how the USB core will handle a hub with no ports... | ||
1753 | */ | ||
1754 | if (xhci->num_usb2_ports) { | ||
1755 | xhci->usb2_ports = kmalloc(sizeof(*xhci->usb2_ports)* | ||
1756 | xhci->num_usb2_ports, flags); | ||
1757 | if (!xhci->usb2_ports) | ||
1758 | return -ENOMEM; | ||
1759 | |||
1760 | port_index = 0; | ||
1761 | for (i = 0; i < num_ports; i++) | ||
1762 | if (xhci->port_array[i] != 0x03) { | ||
1763 | xhci->usb2_ports[port_index] = | ||
1764 | &xhci->op_regs->port_status_base + | ||
1765 | NUM_PORT_REGS*i; | ||
1766 | xhci_dbg(xhci, "USB 2.0 port at index %u, " | ||
1767 | "addr = %p\n", i, | ||
1768 | xhci->usb2_ports[port_index]); | ||
1769 | port_index++; | ||
1770 | } | ||
1771 | } | ||
1772 | if (xhci->num_usb3_ports) { | ||
1773 | xhci->usb3_ports = kmalloc(sizeof(*xhci->usb3_ports)* | ||
1774 | xhci->num_usb3_ports, flags); | ||
1775 | if (!xhci->usb3_ports) | ||
1776 | return -ENOMEM; | ||
1777 | |||
1778 | port_index = 0; | ||
1779 | for (i = 0; i < num_ports; i++) | ||
1780 | if (xhci->port_array[i] == 0x03) { | ||
1781 | xhci->usb3_ports[port_index] = | ||
1782 | &xhci->op_regs->port_status_base + | ||
1783 | NUM_PORT_REGS*i; | ||
1784 | xhci_dbg(xhci, "USB 3.0 port at index %u, " | ||
1785 | "addr = %p\n", i, | ||
1786 | xhci->usb3_ports[port_index]); | ||
1787 | port_index++; | ||
1788 | } | ||
1789 | } | ||
1790 | return 0; | ||
1791 | } | ||
1630 | 1792 | ||
1631 | int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) | 1793 | int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) |
1632 | { | 1794 | { |
@@ -1809,6 +1971,8 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) | |||
1809 | 1971 | ||
1810 | if (scratchpad_alloc(xhci, flags)) | 1972 | if (scratchpad_alloc(xhci, flags)) |
1811 | goto fail; | 1973 | goto fail; |
1974 | if (xhci_setup_port_arrays(xhci, flags)) | ||
1975 | goto fail; | ||
1812 | 1976 | ||
1813 | return 0; | 1977 | return 0; |
1814 | 1978 | ||
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 06fca0835b52..45e4a3108cc3 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c | |||
@@ -1549,6 +1549,15 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci, | |||
1549 | cmd_completion = command->completion; | 1549 | cmd_completion = command->completion; |
1550 | cmd_status = &command->status; | 1550 | cmd_status = &command->status; |
1551 | command->command_trb = xhci->cmd_ring->enqueue; | 1551 | command->command_trb = xhci->cmd_ring->enqueue; |
1552 | |||
1553 | /* Enqueue pointer can be left pointing to the link TRB, | ||
1554 | * we must handle that | ||
1555 | */ | ||
1556 | if ((command->command_trb->link.control & TRB_TYPE_BITMASK) | ||
1557 | == TRB_TYPE(TRB_LINK)) | ||
1558 | command->command_trb = | ||
1559 | xhci->cmd_ring->enq_seg->next->trbs; | ||
1560 | |||
1552 | list_add_tail(&command->cmd_list, &virt_dev->cmd_list); | 1561 | list_add_tail(&command->cmd_list, &virt_dev->cmd_list); |
1553 | } else { | 1562 | } else { |
1554 | in_ctx = virt_dev->in_ctx; | 1563 | in_ctx = virt_dev->in_ctx; |
@@ -2272,6 +2281,15 @@ int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev) | |||
2272 | /* Attempt to submit the Reset Device command to the command ring */ | 2281 | /* Attempt to submit the Reset Device command to the command ring */ |
2273 | spin_lock_irqsave(&xhci->lock, flags); | 2282 | spin_lock_irqsave(&xhci->lock, flags); |
2274 | reset_device_cmd->command_trb = xhci->cmd_ring->enqueue; | 2283 | reset_device_cmd->command_trb = xhci->cmd_ring->enqueue; |
2284 | |||
2285 | /* Enqueue pointer can be left pointing to the link TRB, | ||
2286 | * we must handle that | ||
2287 | */ | ||
2288 | if ((reset_device_cmd->command_trb->link.control & TRB_TYPE_BITMASK) | ||
2289 | == TRB_TYPE(TRB_LINK)) | ||
2290 | reset_device_cmd->command_trb = | ||
2291 | xhci->cmd_ring->enq_seg->next->trbs; | ||
2292 | |||
2275 | list_add_tail(&reset_device_cmd->cmd_list, &virt_dev->cmd_list); | 2293 | list_add_tail(&reset_device_cmd->cmd_list, &virt_dev->cmd_list); |
2276 | ret = xhci_queue_reset_device(xhci, slot_id); | 2294 | ret = xhci_queue_reset_device(xhci, slot_id); |
2277 | if (ret) { | 2295 | if (ret) { |
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 85e65647d445..170c367112d2 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h | |||
@@ -454,6 +454,24 @@ struct xhci_doorbell_array { | |||
454 | 454 | ||
455 | 455 | ||
456 | /** | 456 | /** |
457 | * struct xhci_protocol_caps | ||
458 | * @revision: major revision, minor revision, capability ID, | ||
459 | * and next capability pointer. | ||
460 | * @name_string: Four ASCII characters to say which spec this xHC | ||
461 | * follows, typically "USB ". | ||
462 | * @port_info: Port offset, count, and protocol-defined information. | ||
463 | */ | ||
464 | struct xhci_protocol_caps { | ||
465 | u32 revision; | ||
466 | u32 name_string; | ||
467 | u32 port_info; | ||
468 | }; | ||
469 | |||
470 | #define XHCI_EXT_PORT_MAJOR(x) (((x) >> 24) & 0xff) | ||
471 | #define XHCI_EXT_PORT_OFF(x) ((x) & 0xff) | ||
472 | #define XHCI_EXT_PORT_COUNT(x) (((x) >> 8) & 0xff) | ||
473 | |||
474 | /** | ||
457 | * struct xhci_container_ctx | 475 | * struct xhci_container_ctx |
458 | * @type: Type of context. Used to calculated offsets to contained contexts. | 476 | * @type: Type of context. Used to calculated offsets to contained contexts. |
459 | * @size: Size of the context data | 477 | * @size: Size of the context data |
@@ -1240,6 +1258,14 @@ struct xhci_hcd { | |||
1240 | u32 suspended_ports[8]; /* which ports are | 1258 | u32 suspended_ports[8]; /* which ports are |
1241 | suspended */ | 1259 | suspended */ |
1242 | unsigned long resume_done[MAX_HC_PORTS]; | 1260 | unsigned long resume_done[MAX_HC_PORTS]; |
1261 | /* Is each xHCI roothub port a USB 3.0, USB 2.0, or USB 1.1 port? */ | ||
1262 | u8 *port_array; | ||
1263 | /* Array of pointers to USB 3.0 PORTSC registers */ | ||
1264 | u32 __iomem **usb3_ports; | ||
1265 | unsigned int num_usb3_ports; | ||
1266 | /* Array of pointers to USB 2.0 PORTSC registers */ | ||
1267 | u32 __iomem **usb2_ports; | ||
1268 | unsigned int num_usb2_ports; | ||
1243 | }; | 1269 | }; |
1244 | 1270 | ||
1245 | /* For testing purposes */ | 1271 | /* For testing purposes */ |
diff --git a/drivers/usb/misc/yurex.c b/drivers/usb/misc/yurex.c index 719c6180b31f..ac5bfd619e62 100644 --- a/drivers/usb/misc/yurex.c +++ b/drivers/usb/misc/yurex.c | |||
@@ -536,6 +536,7 @@ static const struct file_operations yurex_fops = { | |||
536 | .open = yurex_open, | 536 | .open = yurex_open, |
537 | .release = yurex_release, | 537 | .release = yurex_release, |
538 | .fasync = yurex_fasync, | 538 | .fasync = yurex_fasync, |
539 | .llseek = default_llseek, | ||
539 | }; | 540 | }; |
540 | 541 | ||
541 | 542 | ||
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index e6669fc3b804..99beebce8550 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c | |||
@@ -2116,12 +2116,15 @@ bad_config: | |||
2116 | * Otherwise, wait till the gadget driver hooks up. | 2116 | * Otherwise, wait till the gadget driver hooks up. |
2117 | */ | 2117 | */ |
2118 | if (!is_otg_enabled(musb) && is_host_enabled(musb)) { | 2118 | if (!is_otg_enabled(musb) && is_host_enabled(musb)) { |
2119 | struct usb_hcd *hcd = musb_to_hcd(musb); | ||
2120 | |||
2119 | MUSB_HST_MODE(musb); | 2121 | MUSB_HST_MODE(musb); |
2120 | musb->xceiv->default_a = 1; | 2122 | musb->xceiv->default_a = 1; |
2121 | musb->xceiv->state = OTG_STATE_A_IDLE; | 2123 | musb->xceiv->state = OTG_STATE_A_IDLE; |
2122 | 2124 | ||
2123 | status = usb_add_hcd(musb_to_hcd(musb), -1, 0); | 2125 | status = usb_add_hcd(musb_to_hcd(musb), -1, 0); |
2124 | 2126 | ||
2127 | hcd->self.uses_pio_for_control = 1; | ||
2125 | DBG(1, "%s mode, status %d, devctl %02x %c\n", | 2128 | DBG(1, "%s mode, status %d, devctl %02x %c\n", |
2126 | "HOST", status, | 2129 | "HOST", status, |
2127 | musb_readb(musb->mregs, MUSB_DEVCTL), | 2130 | musb_readb(musb->mregs, MUSB_DEVCTL), |
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index 36cfd060dbe5..9d6ade82b9f2 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c | |||
@@ -92,6 +92,59 @@ | |||
92 | 92 | ||
93 | /* ----------------------------------------------------------------------- */ | 93 | /* ----------------------------------------------------------------------- */ |
94 | 94 | ||
95 | /* Maps the buffer to dma */ | ||
96 | |||
97 | static inline void map_dma_buffer(struct musb_request *request, | ||
98 | struct musb *musb) | ||
99 | { | ||
100 | if (request->request.dma == DMA_ADDR_INVALID) { | ||
101 | request->request.dma = dma_map_single( | ||
102 | musb->controller, | ||
103 | request->request.buf, | ||
104 | request->request.length, | ||
105 | request->tx | ||
106 | ? DMA_TO_DEVICE | ||
107 | : DMA_FROM_DEVICE); | ||
108 | request->mapped = 1; | ||
109 | } else { | ||
110 | dma_sync_single_for_device(musb->controller, | ||
111 | request->request.dma, | ||
112 | request->request.length, | ||
113 | request->tx | ||
114 | ? DMA_TO_DEVICE | ||
115 | : DMA_FROM_DEVICE); | ||
116 | request->mapped = 0; | ||
117 | } | ||
118 | } | ||
119 | |||
120 | /* Unmap the buffer from dma and maps it back to cpu */ | ||
121 | static inline void unmap_dma_buffer(struct musb_request *request, | ||
122 | struct musb *musb) | ||
123 | { | ||
124 | if (request->request.dma == DMA_ADDR_INVALID) { | ||
125 | DBG(20, "not unmapping a never mapped buffer\n"); | ||
126 | return; | ||
127 | } | ||
128 | if (request->mapped) { | ||
129 | dma_unmap_single(musb->controller, | ||
130 | request->request.dma, | ||
131 | request->request.length, | ||
132 | request->tx | ||
133 | ? DMA_TO_DEVICE | ||
134 | : DMA_FROM_DEVICE); | ||
135 | request->request.dma = DMA_ADDR_INVALID; | ||
136 | request->mapped = 0; | ||
137 | } else { | ||
138 | dma_sync_single_for_cpu(musb->controller, | ||
139 | request->request.dma, | ||
140 | request->request.length, | ||
141 | request->tx | ||
142 | ? DMA_TO_DEVICE | ||
143 | : DMA_FROM_DEVICE); | ||
144 | |||
145 | } | ||
146 | } | ||
147 | |||
95 | /* | 148 | /* |
96 | * Immediately complete a request. | 149 | * Immediately complete a request. |
97 | * | 150 | * |
@@ -119,24 +172,8 @@ __acquires(ep->musb->lock) | |||
119 | 172 | ||
120 | ep->busy = 1; | 173 | ep->busy = 1; |
121 | spin_unlock(&musb->lock); | 174 | spin_unlock(&musb->lock); |
122 | if (is_dma_capable()) { | 175 | if (is_dma_capable() && ep->dma) |
123 | if (req->mapped) { | 176 | unmap_dma_buffer(req, musb); |
124 | dma_unmap_single(musb->controller, | ||
125 | req->request.dma, | ||
126 | req->request.length, | ||
127 | req->tx | ||
128 | ? DMA_TO_DEVICE | ||
129 | : DMA_FROM_DEVICE); | ||
130 | req->request.dma = DMA_ADDR_INVALID; | ||
131 | req->mapped = 0; | ||
132 | } else if (req->request.dma != DMA_ADDR_INVALID) | ||
133 | dma_sync_single_for_cpu(musb->controller, | ||
134 | req->request.dma, | ||
135 | req->request.length, | ||
136 | req->tx | ||
137 | ? DMA_TO_DEVICE | ||
138 | : DMA_FROM_DEVICE); | ||
139 | } | ||
140 | if (request->status == 0) | 177 | if (request->status == 0) |
141 | DBG(5, "%s done request %p, %d/%d\n", | 178 | DBG(5, "%s done request %p, %d/%d\n", |
142 | ep->end_point.name, request, | 179 | ep->end_point.name, request, |
@@ -395,6 +432,13 @@ static void txstate(struct musb *musb, struct musb_request *req) | |||
395 | #endif | 432 | #endif |
396 | 433 | ||
397 | if (!use_dma) { | 434 | if (!use_dma) { |
435 | /* | ||
436 | * Unmap the dma buffer back to cpu if dma channel | ||
437 | * programming fails | ||
438 | */ | ||
439 | if (is_dma_capable() && musb_ep->dma) | ||
440 | unmap_dma_buffer(req, musb); | ||
441 | |||
398 | musb_write_fifo(musb_ep->hw_ep, fifo_count, | 442 | musb_write_fifo(musb_ep->hw_ep, fifo_count, |
399 | (u8 *) (request->buf + request->actual)); | 443 | (u8 *) (request->buf + request->actual)); |
400 | request->actual += fifo_count; | 444 | request->actual += fifo_count; |
@@ -713,6 +757,21 @@ static void rxstate(struct musb *musb, struct musb_request *req) | |||
713 | return; | 757 | return; |
714 | } | 758 | } |
715 | #endif | 759 | #endif |
760 | /* | ||
761 | * Unmap the dma buffer back to cpu if dma channel | ||
762 | * programming fails. This buffer is mapped if the | ||
763 | * channel allocation is successful | ||
764 | */ | ||
765 | if (is_dma_capable() && musb_ep->dma) { | ||
766 | unmap_dma_buffer(req, musb); | ||
767 | |||
768 | /* | ||
769 | * Clear DMAENAB and AUTOCLEAR for the | ||
770 | * PIO mode transfer | ||
771 | */ | ||
772 | csr &= ~(MUSB_RXCSR_DMAENAB | MUSB_RXCSR_AUTOCLEAR); | ||
773 | musb_writew(epio, MUSB_RXCSR, csr); | ||
774 | } | ||
716 | 775 | ||
717 | musb_read_fifo(musb_ep->hw_ep, fifo_count, (u8 *) | 776 | musb_read_fifo(musb_ep->hw_ep, fifo_count, (u8 *) |
718 | (request->buf + request->actual)); | 777 | (request->buf + request->actual)); |
@@ -837,7 +896,9 @@ void musb_g_rx(struct musb *musb, u8 epnum) | |||
837 | if (!request) | 896 | if (!request) |
838 | return; | 897 | return; |
839 | } | 898 | } |
899 | #if defined(CONFIG_USB_INVENTRA_DMA) || defined(CONFIG_USB_TUSB_OMAP_DMA) | ||
840 | exit: | 900 | exit: |
901 | #endif | ||
841 | /* Analyze request */ | 902 | /* Analyze request */ |
842 | rxstate(musb, to_musb_request(request)); | 903 | rxstate(musb, to_musb_request(request)); |
843 | } | 904 | } |
@@ -1150,26 +1211,9 @@ static int musb_gadget_queue(struct usb_ep *ep, struct usb_request *req, | |||
1150 | request->epnum = musb_ep->current_epnum; | 1211 | request->epnum = musb_ep->current_epnum; |
1151 | request->tx = musb_ep->is_in; | 1212 | request->tx = musb_ep->is_in; |
1152 | 1213 | ||
1153 | if (is_dma_capable() && musb_ep->dma) { | 1214 | if (is_dma_capable() && musb_ep->dma) |
1154 | if (request->request.dma == DMA_ADDR_INVALID) { | 1215 | map_dma_buffer(request, musb); |
1155 | request->request.dma = dma_map_single( | 1216 | else |
1156 | musb->controller, | ||
1157 | request->request.buf, | ||
1158 | request->request.length, | ||
1159 | request->tx | ||
1160 | ? DMA_TO_DEVICE | ||
1161 | : DMA_FROM_DEVICE); | ||
1162 | request->mapped = 1; | ||
1163 | } else { | ||
1164 | dma_sync_single_for_device(musb->controller, | ||
1165 | request->request.dma, | ||
1166 | request->request.length, | ||
1167 | request->tx | ||
1168 | ? DMA_TO_DEVICE | ||
1169 | : DMA_FROM_DEVICE); | ||
1170 | request->mapped = 0; | ||
1171 | } | ||
1172 | } else | ||
1173 | request->mapped = 0; | 1217 | request->mapped = 0; |
1174 | 1218 | ||
1175 | spin_lock_irqsave(&musb->lock, lockflags); | 1219 | spin_lock_irqsave(&musb->lock, lockflags); |
@@ -1789,6 +1833,8 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver, | |||
1789 | spin_unlock_irqrestore(&musb->lock, flags); | 1833 | spin_unlock_irqrestore(&musb->lock, flags); |
1790 | 1834 | ||
1791 | if (is_otg_enabled(musb)) { | 1835 | if (is_otg_enabled(musb)) { |
1836 | struct usb_hcd *hcd = musb_to_hcd(musb); | ||
1837 | |||
1792 | DBG(3, "OTG startup...\n"); | 1838 | DBG(3, "OTG startup...\n"); |
1793 | 1839 | ||
1794 | /* REVISIT: funcall to other code, which also | 1840 | /* REVISIT: funcall to other code, which also |
@@ -1803,6 +1849,8 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver, | |||
1803 | musb->gadget_driver = NULL; | 1849 | musb->gadget_driver = NULL; |
1804 | musb->g.dev.driver = NULL; | 1850 | musb->g.dev.driver = NULL; |
1805 | spin_unlock_irqrestore(&musb->lock, flags); | 1851 | spin_unlock_irqrestore(&musb->lock, flags); |
1852 | } else { | ||
1853 | hcd->self.uses_pio_for_control = 1; | ||
1806 | } | 1854 | } |
1807 | } | 1855 | } |
1808 | } | 1856 | } |
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 76f8b3556672..6a50965e23f2 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c | |||
@@ -201,6 +201,7 @@ static struct usb_device_id id_table_combined [] = { | |||
201 | { USB_DEVICE(FTDI_VID, FTDI_MTXORB_5_PID) }, | 201 | { USB_DEVICE(FTDI_VID, FTDI_MTXORB_5_PID) }, |
202 | { USB_DEVICE(FTDI_VID, FTDI_MTXORB_6_PID) }, | 202 | { USB_DEVICE(FTDI_VID, FTDI_MTXORB_6_PID) }, |
203 | { USB_DEVICE(FTDI_VID, FTDI_R2000KU_TRUE_RNG) }, | 203 | { USB_DEVICE(FTDI_VID, FTDI_R2000KU_TRUE_RNG) }, |
204 | { USB_DEVICE(FTDI_VID, FTDI_VARDAAN_PID) }, | ||
204 | { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0100_PID) }, | 205 | { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0100_PID) }, |
205 | { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0101_PID) }, | 206 | { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0101_PID) }, |
206 | { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0102_PID) }, | 207 | { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0102_PID) }, |
@@ -696,6 +697,7 @@ static struct usb_device_id id_table_combined [] = { | |||
696 | .driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk }, | 697 | .driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk }, |
697 | { USB_DEVICE(TELLDUS_VID, TELLDUS_TELLSTICK_PID) }, | 698 | { USB_DEVICE(TELLDUS_VID, TELLDUS_TELLSTICK_PID) }, |
698 | { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_SERIAL_VX7_PID) }, | 699 | { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_SERIAL_VX7_PID) }, |
700 | { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_CT29B_PID) }, | ||
699 | { USB_DEVICE(FTDI_VID, FTDI_MAXSTREAM_PID) }, | 701 | { USB_DEVICE(FTDI_VID, FTDI_MAXSTREAM_PID) }, |
700 | { USB_DEVICE(FTDI_VID, FTDI_PHI_FISCO_PID) }, | 702 | { USB_DEVICE(FTDI_VID, FTDI_PHI_FISCO_PID) }, |
701 | { USB_DEVICE(TML_VID, TML_USB_SERIAL_PID) }, | 703 | { USB_DEVICE(TML_VID, TML_USB_SERIAL_PID) }, |
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 263f62551197..1286f1e23d8c 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h | |||
@@ -114,6 +114,9 @@ | |||
114 | /* Lenz LI-USB Computer Interface. */ | 114 | /* Lenz LI-USB Computer Interface. */ |
115 | #define FTDI_LENZ_LIUSB_PID 0xD780 | 115 | #define FTDI_LENZ_LIUSB_PID 0xD780 |
116 | 116 | ||
117 | /* Vardaan Enterprises Serial Interface VEUSB422R3 */ | ||
118 | #define FTDI_VARDAAN_PID 0xF070 | ||
119 | |||
117 | /* | 120 | /* |
118 | * Xsens Technologies BV products (http://www.xsens.com). | 121 | * Xsens Technologies BV products (http://www.xsens.com). |
119 | */ | 122 | */ |
@@ -721,6 +724,7 @@ | |||
721 | */ | 724 | */ |
722 | #define RTSYSTEMS_VID 0x2100 /* Vendor ID */ | 725 | #define RTSYSTEMS_VID 0x2100 /* Vendor ID */ |
723 | #define RTSYSTEMS_SERIAL_VX7_PID 0x9e52 /* Serial converter for VX-7 Radios using FT232RL */ | 726 | #define RTSYSTEMS_SERIAL_VX7_PID 0x9e52 /* Serial converter for VX-7 Radios using FT232RL */ |
727 | #define RTSYSTEMS_CT29B_PID 0x9e54 /* CT29B Radio Cable */ | ||
724 | 728 | ||
725 | /* | 729 | /* |
726 | * Bayer Ascensia Contour blood glucose meter USB-converter cable. | 730 | * Bayer Ascensia Contour blood glucose meter USB-converter cable. |
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 861223f2af6e..6954de50c0ff 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c | |||
@@ -51,6 +51,7 @@ static struct usb_driver usb_serial_driver = { | |||
51 | .suspend = usb_serial_suspend, | 51 | .suspend = usb_serial_suspend, |
52 | .resume = usb_serial_resume, | 52 | .resume = usb_serial_resume, |
53 | .no_dynamic_id = 1, | 53 | .no_dynamic_id = 1, |
54 | .supports_autosuspend = 1, | ||
54 | }; | 55 | }; |
55 | 56 | ||
56 | /* There is no MODULE_DEVICE_TABLE for usbserial.c. Instead | 57 | /* There is no MODULE_DEVICE_TABLE for usbserial.c. Instead |
@@ -1343,6 +1344,8 @@ int usb_serial_register(struct usb_serial_driver *driver) | |||
1343 | return -ENODEV; | 1344 | return -ENODEV; |
1344 | 1345 | ||
1345 | fixup_generic(driver); | 1346 | fixup_generic(driver); |
1347 | if (driver->usb_driver) | ||
1348 | driver->usb_driver->supports_autosuspend = 1; | ||
1346 | 1349 | ||
1347 | if (!driver->description) | 1350 | if (!driver->description) |
1348 | driver->description = driver->driver.name; | 1351 | driver->description = driver->driver.name; |
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index 4a291045ebac..a5ad77ef4266 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig | |||
@@ -558,6 +558,9 @@ config IT8712F_WDT | |||
558 | This is the driver for the built-in watchdog timer on the IT8712F | 558 | This is the driver for the built-in watchdog timer on the IT8712F |
559 | Super I/0 chipset used on many motherboards. | 559 | Super I/0 chipset used on many motherboards. |
560 | 560 | ||
561 | If the driver does not work, then make sure that the game port in | ||
562 | the BIOS is enabled. | ||
563 | |||
561 | To compile this driver as a module, choose M here: the | 564 | To compile this driver as a module, choose M here: the |
562 | module will be called it8712f_wdt. | 565 | module will be called it8712f_wdt. |
563 | 566 | ||
diff --git a/drivers/watchdog/bcm63xx_wdt.c b/drivers/watchdog/bcm63xx_wdt.c index a1debc89356b..3c5045a206dd 100644 --- a/drivers/watchdog/bcm63xx_wdt.c +++ b/drivers/watchdog/bcm63xx_wdt.c | |||
@@ -18,7 +18,6 @@ | |||
18 | #include <linux/miscdevice.h> | 18 | #include <linux/miscdevice.h> |
19 | #include <linux/module.h> | 19 | #include <linux/module.h> |
20 | #include <linux/moduleparam.h> | 20 | #include <linux/moduleparam.h> |
21 | #include <linux/reboot.h> | ||
22 | #include <linux/types.h> | 21 | #include <linux/types.h> |
23 | #include <linux/uaccess.h> | 22 | #include <linux/uaccess.h> |
24 | #include <linux/watchdog.h> | 23 | #include <linux/watchdog.h> |
@@ -220,14 +219,6 @@ static long bcm63xx_wdt_ioctl(struct file *file, unsigned int cmd, | |||
220 | } | 219 | } |
221 | } | 220 | } |
222 | 221 | ||
223 | static int bcm63xx_wdt_notify_sys(struct notifier_block *this, | ||
224 | unsigned long code, void *unused) | ||
225 | { | ||
226 | if (code == SYS_DOWN || code == SYS_HALT) | ||
227 | bcm63xx_wdt_pause(); | ||
228 | return NOTIFY_DONE; | ||
229 | } | ||
230 | |||
231 | static const struct file_operations bcm63xx_wdt_fops = { | 222 | static const struct file_operations bcm63xx_wdt_fops = { |
232 | .owner = THIS_MODULE, | 223 | .owner = THIS_MODULE, |
233 | .llseek = no_llseek, | 224 | .llseek = no_llseek, |
@@ -243,12 +234,8 @@ static struct miscdevice bcm63xx_wdt_miscdev = { | |||
243 | .fops = &bcm63xx_wdt_fops, | 234 | .fops = &bcm63xx_wdt_fops, |
244 | }; | 235 | }; |
245 | 236 | ||
246 | static struct notifier_block bcm63xx_wdt_notifier = { | ||
247 | .notifier_call = bcm63xx_wdt_notify_sys, | ||
248 | }; | ||
249 | 237 | ||
250 | 238 | static int __devinit bcm63xx_wdt_probe(struct platform_device *pdev) | |
251 | static int bcm63xx_wdt_probe(struct platform_device *pdev) | ||
252 | { | 239 | { |
253 | int ret; | 240 | int ret; |
254 | struct resource *r; | 241 | struct resource *r; |
@@ -280,16 +267,10 @@ static int bcm63xx_wdt_probe(struct platform_device *pdev) | |||
280 | wdt_time); | 267 | wdt_time); |
281 | } | 268 | } |
282 | 269 | ||
283 | ret = register_reboot_notifier(&bcm63xx_wdt_notifier); | ||
284 | if (ret) { | ||
285 | dev_err(&pdev->dev, "failed to register reboot_notifier\n"); | ||
286 | goto unregister_timer; | ||
287 | } | ||
288 | |||
289 | ret = misc_register(&bcm63xx_wdt_miscdev); | 270 | ret = misc_register(&bcm63xx_wdt_miscdev); |
290 | if (ret < 0) { | 271 | if (ret < 0) { |
291 | dev_err(&pdev->dev, "failed to register watchdog device\n"); | 272 | dev_err(&pdev->dev, "failed to register watchdog device\n"); |
292 | goto unregister_reboot_notifier; | 273 | goto unregister_timer; |
293 | } | 274 | } |
294 | 275 | ||
295 | dev_info(&pdev->dev, " started, timer margin: %d sec\n", | 276 | dev_info(&pdev->dev, " started, timer margin: %d sec\n", |
@@ -297,8 +278,6 @@ static int bcm63xx_wdt_probe(struct platform_device *pdev) | |||
297 | 278 | ||
298 | return 0; | 279 | return 0; |
299 | 280 | ||
300 | unregister_reboot_notifier: | ||
301 | unregister_reboot_notifier(&bcm63xx_wdt_notifier); | ||
302 | unregister_timer: | 281 | unregister_timer: |
303 | bcm63xx_timer_unregister(TIMER_WDT_ID); | 282 | bcm63xx_timer_unregister(TIMER_WDT_ID); |
304 | unmap: | 283 | unmap: |
@@ -306,25 +285,28 @@ unmap: | |||
306 | return ret; | 285 | return ret; |
307 | } | 286 | } |
308 | 287 | ||
309 | static int bcm63xx_wdt_remove(struct platform_device *pdev) | 288 | static int __devexit bcm63xx_wdt_remove(struct platform_device *pdev) |
310 | { | 289 | { |
311 | if (!nowayout) | 290 | if (!nowayout) |
312 | bcm63xx_wdt_pause(); | 291 | bcm63xx_wdt_pause(); |
313 | 292 | ||
314 | misc_deregister(&bcm63xx_wdt_miscdev); | 293 | misc_deregister(&bcm63xx_wdt_miscdev); |
315 | |||
316 | iounmap(bcm63xx_wdt_device.regs); | ||
317 | |||
318 | unregister_reboot_notifier(&bcm63xx_wdt_notifier); | ||
319 | bcm63xx_timer_unregister(TIMER_WDT_ID); | 294 | bcm63xx_timer_unregister(TIMER_WDT_ID); |
320 | 295 | iounmap(bcm63xx_wdt_device.regs); | |
321 | return 0; | 296 | return 0; |
322 | } | 297 | } |
323 | 298 | ||
299 | static void bcm63xx_wdt_shutdown(struct platform_device *pdev) | ||
300 | { | ||
301 | bcm63xx_wdt_pause(); | ||
302 | } | ||
303 | |||
324 | static struct platform_driver bcm63xx_wdt = { | 304 | static struct platform_driver bcm63xx_wdt = { |
325 | .probe = bcm63xx_wdt_probe, | 305 | .probe = bcm63xx_wdt_probe, |
326 | .remove = bcm63xx_wdt_remove, | 306 | .remove = __devexit_p(bcm63xx_wdt_remove), |
307 | .shutdown = bcm63xx_wdt_shutdown, | ||
327 | .driver = { | 308 | .driver = { |
309 | .owner = THIS_MODULE, | ||
328 | .name = "bcm63xx-wdt", | 310 | .name = "bcm63xx-wdt", |
329 | } | 311 | } |
330 | }; | 312 | }; |
diff --git a/drivers/watchdog/gef_wdt.c b/drivers/watchdog/gef_wdt.c index 9c21d19043a6..f6bd6f10fcec 100644 --- a/drivers/watchdog/gef_wdt.c +++ b/drivers/watchdog/gef_wdt.c | |||
@@ -30,6 +30,7 @@ | |||
30 | #include <linux/module.h> | 30 | #include <linux/module.h> |
31 | #include <linux/miscdevice.h> | 31 | #include <linux/miscdevice.h> |
32 | #include <linux/watchdog.h> | 32 | #include <linux/watchdog.h> |
33 | #include <linux/fs.h> | ||
33 | #include <linux/of.h> | 34 | #include <linux/of.h> |
34 | #include <linux/of_platform.h> | 35 | #include <linux/of_platform.h> |
35 | #include <linux/io.h> | 36 | #include <linux/io.h> |
diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c index f7e90fe47b71..b8838d2c67a6 100644 --- a/drivers/watchdog/iTCO_wdt.c +++ b/drivers/watchdog/iTCO_wdt.c | |||
@@ -32,6 +32,7 @@ | |||
32 | * document number 322169-001, 322170-003: 5 Series, 3400 Series (PCH) | 32 | * document number 322169-001, 322170-003: 5 Series, 3400 Series (PCH) |
33 | * document number 320066-003, 320257-008: EP80597 (IICH) | 33 | * document number 320066-003, 320257-008: EP80597 (IICH) |
34 | * document number TBD : Cougar Point (CPT) | 34 | * document number TBD : Cougar Point (CPT) |
35 | * document number TBD : Patsburg (PBG) | ||
35 | */ | 36 | */ |
36 | 37 | ||
37 | /* | 38 | /* |
@@ -146,7 +147,8 @@ enum iTCO_chipsets { | |||
146 | TCO_CPT29, /* Cougar Point */ | 147 | TCO_CPT29, /* Cougar Point */ |
147 | TCO_CPT30, /* Cougar Point */ | 148 | TCO_CPT30, /* Cougar Point */ |
148 | TCO_CPT31, /* Cougar Point */ | 149 | TCO_CPT31, /* Cougar Point */ |
149 | TCO_PBG, /* Patsburg */ | 150 | TCO_PBG1, /* Patsburg */ |
151 | TCO_PBG2, /* Patsburg */ | ||
150 | }; | 152 | }; |
151 | 153 | ||
152 | static struct { | 154 | static struct { |
@@ -235,6 +237,7 @@ static struct { | |||
235 | {"Cougar Point", 2}, | 237 | {"Cougar Point", 2}, |
236 | {"Cougar Point", 2}, | 238 | {"Cougar Point", 2}, |
237 | {"Patsburg", 2}, | 239 | {"Patsburg", 2}, |
240 | {"Patsburg", 2}, | ||
238 | {NULL, 0} | 241 | {NULL, 0} |
239 | }; | 242 | }; |
240 | 243 | ||
@@ -350,7 +353,8 @@ static struct pci_device_id iTCO_wdt_pci_tbl[] = { | |||
350 | { ITCO_PCI_DEVICE(0x1c5d, TCO_CPT29)}, | 353 | { ITCO_PCI_DEVICE(0x1c5d, TCO_CPT29)}, |
351 | { ITCO_PCI_DEVICE(0x1c5e, TCO_CPT30)}, | 354 | { ITCO_PCI_DEVICE(0x1c5e, TCO_CPT30)}, |
352 | { ITCO_PCI_DEVICE(0x1c5f, TCO_CPT31)}, | 355 | { ITCO_PCI_DEVICE(0x1c5f, TCO_CPT31)}, |
353 | { ITCO_PCI_DEVICE(0x1d40, TCO_PBG)}, | 356 | { ITCO_PCI_DEVICE(0x1d40, TCO_PBG1)}, |
357 | { ITCO_PCI_DEVICE(0x1d41, TCO_PBG2)}, | ||
354 | { 0, }, /* End of list */ | 358 | { 0, }, /* End of list */ |
355 | }; | 359 | }; |
356 | MODULE_DEVICE_TABLE(pci, iTCO_wdt_pci_tbl); | 360 | MODULE_DEVICE_TABLE(pci, iTCO_wdt_pci_tbl); |