diff options
Diffstat (limited to 'drivers/video/fbdev/omap2/displays-new/panel-tpo-td028ttec1.c')
-rw-r--r-- | drivers/video/fbdev/omap2/displays-new/panel-tpo-td028ttec1.c | 480 |
1 files changed, 480 insertions, 0 deletions
diff --git a/drivers/video/fbdev/omap2/displays-new/panel-tpo-td028ttec1.c b/drivers/video/fbdev/omap2/displays-new/panel-tpo-td028ttec1.c new file mode 100644 index 000000000000..fae6adc005a7 --- /dev/null +++ b/drivers/video/fbdev/omap2/displays-new/panel-tpo-td028ttec1.c | |||
@@ -0,0 +1,480 @@ | |||
1 | /* | ||
2 | * Toppoly TD028TTEC1 panel support | ||
3 | * | ||
4 | * Copyright (C) 2008 Nokia Corporation | ||
5 | * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> | ||
6 | * | ||
7 | * Neo 1973 code (jbt6k74.c): | ||
8 | * Copyright (C) 2006-2007 by OpenMoko, Inc. | ||
9 | * Author: Harald Welte <laforge@openmoko.org> | ||
10 | * | ||
11 | * Ported and adapted from Neo 1973 U-Boot by: | ||
12 | * H. Nikolaus Schaller <hns@goldelico.com> | ||
13 | * | ||
14 | * This program is free software; you can redistribute it and/or modify it | ||
15 | * under the terms of the GNU General Public License version 2 as published by | ||
16 | * the Free Software Foundation. | ||
17 | * | ||
18 | * This program is distributed in the hope that it will be useful, but WITHOUT | ||
19 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | ||
20 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for | ||
21 | * more details. | ||
22 | * | ||
23 | * You should have received a copy of the GNU General Public License along with | ||
24 | * this program. If not, see <http://www.gnu.org/licenses/>. | ||
25 | */ | ||
26 | |||
27 | #include <linux/module.h> | ||
28 | #include <linux/delay.h> | ||
29 | #include <linux/spi/spi.h> | ||
30 | #include <linux/gpio.h> | ||
31 | #include <video/omapdss.h> | ||
32 | #include <video/omap-panel-data.h> | ||
33 | |||
34 | struct panel_drv_data { | ||
35 | struct omap_dss_device dssdev; | ||
36 | struct omap_dss_device *in; | ||
37 | |||
38 | int data_lines; | ||
39 | |||
40 | struct omap_video_timings videomode; | ||
41 | |||
42 | struct spi_device *spi_dev; | ||
43 | }; | ||
44 | |||
45 | static struct omap_video_timings td028ttec1_panel_timings = { | ||
46 | .x_res = 480, | ||
47 | .y_res = 640, | ||
48 | .pixelclock = 22153000, | ||
49 | .hfp = 24, | ||
50 | .hsw = 8, | ||
51 | .hbp = 8, | ||
52 | .vfp = 4, | ||
53 | .vsw = 2, | ||
54 | .vbp = 2, | ||
55 | |||
56 | .vsync_level = OMAPDSS_SIG_ACTIVE_LOW, | ||
57 | .hsync_level = OMAPDSS_SIG_ACTIVE_LOW, | ||
58 | |||
59 | .data_pclk_edge = OMAPDSS_DRIVE_SIG_FALLING_EDGE, | ||
60 | .de_level = OMAPDSS_SIG_ACTIVE_HIGH, | ||
61 | .sync_pclk_edge = OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES, | ||
62 | }; | ||
63 | |||
64 | #define JBT_COMMAND 0x000 | ||
65 | #define JBT_DATA 0x100 | ||
66 | |||
67 | static int jbt_ret_write_0(struct panel_drv_data *ddata, u8 reg) | ||
68 | { | ||
69 | int rc; | ||
70 | u16 tx_buf = JBT_COMMAND | reg; | ||
71 | |||
72 | rc = spi_write(ddata->spi_dev, (u8 *)&tx_buf, | ||
73 | 1*sizeof(u16)); | ||
74 | if (rc != 0) | ||
75 | dev_err(&ddata->spi_dev->dev, | ||
76 | "jbt_ret_write_0 spi_write ret %d\n", rc); | ||
77 | |||
78 | return rc; | ||
79 | } | ||
80 | |||
81 | static int jbt_reg_write_1(struct panel_drv_data *ddata, u8 reg, u8 data) | ||
82 | { | ||
83 | int rc; | ||
84 | u16 tx_buf[2]; | ||
85 | |||
86 | tx_buf[0] = JBT_COMMAND | reg; | ||
87 | tx_buf[1] = JBT_DATA | data; | ||
88 | rc = spi_write(ddata->spi_dev, (u8 *)tx_buf, | ||
89 | 2*sizeof(u16)); | ||
90 | if (rc != 0) | ||
91 | dev_err(&ddata->spi_dev->dev, | ||
92 | "jbt_reg_write_1 spi_write ret %d\n", rc); | ||
93 | |||
94 | return rc; | ||
95 | } | ||
96 | |||
97 | static int jbt_reg_write_2(struct panel_drv_data *ddata, u8 reg, u16 data) | ||
98 | { | ||
99 | int rc; | ||
100 | u16 tx_buf[3]; | ||
101 | |||
102 | tx_buf[0] = JBT_COMMAND | reg; | ||
103 | tx_buf[1] = JBT_DATA | (data >> 8); | ||
104 | tx_buf[2] = JBT_DATA | (data & 0xff); | ||
105 | |||
106 | rc = spi_write(ddata->spi_dev, (u8 *)tx_buf, | ||
107 | 3*sizeof(u16)); | ||
108 | |||
109 | if (rc != 0) | ||
110 | dev_err(&ddata->spi_dev->dev, | ||
111 | "jbt_reg_write_2 spi_write ret %d\n", rc); | ||
112 | |||
113 | return rc; | ||
114 | } | ||
115 | |||
116 | enum jbt_register { | ||
117 | JBT_REG_SLEEP_IN = 0x10, | ||
118 | JBT_REG_SLEEP_OUT = 0x11, | ||
119 | |||
120 | JBT_REG_DISPLAY_OFF = 0x28, | ||
121 | JBT_REG_DISPLAY_ON = 0x29, | ||
122 | |||
123 | JBT_REG_RGB_FORMAT = 0x3a, | ||
124 | JBT_REG_QUAD_RATE = 0x3b, | ||
125 | |||
126 | JBT_REG_POWER_ON_OFF = 0xb0, | ||
127 | JBT_REG_BOOSTER_OP = 0xb1, | ||
128 | JBT_REG_BOOSTER_MODE = 0xb2, | ||
129 | JBT_REG_BOOSTER_FREQ = 0xb3, | ||
130 | JBT_REG_OPAMP_SYSCLK = 0xb4, | ||
131 | JBT_REG_VSC_VOLTAGE = 0xb5, | ||
132 | JBT_REG_VCOM_VOLTAGE = 0xb6, | ||
133 | JBT_REG_EXT_DISPL = 0xb7, | ||
134 | JBT_REG_OUTPUT_CONTROL = 0xb8, | ||
135 | JBT_REG_DCCLK_DCEV = 0xb9, | ||
136 | JBT_REG_DISPLAY_MODE1 = 0xba, | ||
137 | JBT_REG_DISPLAY_MODE2 = 0xbb, | ||
138 | JBT_REG_DISPLAY_MODE = 0xbc, | ||
139 | JBT_REG_ASW_SLEW = 0xbd, | ||
140 | JBT_REG_DUMMY_DISPLAY = 0xbe, | ||
141 | JBT_REG_DRIVE_SYSTEM = 0xbf, | ||
142 | |||
143 | JBT_REG_SLEEP_OUT_FR_A = 0xc0, | ||
144 | JBT_REG_SLEEP_OUT_FR_B = 0xc1, | ||
145 | JBT_REG_SLEEP_OUT_FR_C = 0xc2, | ||
146 | JBT_REG_SLEEP_IN_LCCNT_D = 0xc3, | ||
147 | JBT_REG_SLEEP_IN_LCCNT_E = 0xc4, | ||
148 | JBT_REG_SLEEP_IN_LCCNT_F = 0xc5, | ||
149 | JBT_REG_SLEEP_IN_LCCNT_G = 0xc6, | ||
150 | |||
151 | JBT_REG_GAMMA1_FINE_1 = 0xc7, | ||
152 | JBT_REG_GAMMA1_FINE_2 = 0xc8, | ||
153 | JBT_REG_GAMMA1_INCLINATION = 0xc9, | ||
154 | JBT_REG_GAMMA1_BLUE_OFFSET = 0xca, | ||
155 | |||
156 | JBT_REG_BLANK_CONTROL = 0xcf, | ||
157 | JBT_REG_BLANK_TH_TV = 0xd0, | ||
158 | JBT_REG_CKV_ON_OFF = 0xd1, | ||
159 | JBT_REG_CKV_1_2 = 0xd2, | ||
160 | JBT_REG_OEV_TIMING = 0xd3, | ||
161 | JBT_REG_ASW_TIMING_1 = 0xd4, | ||
162 | JBT_REG_ASW_TIMING_2 = 0xd5, | ||
163 | |||
164 | JBT_REG_HCLOCK_VGA = 0xec, | ||
165 | JBT_REG_HCLOCK_QVGA = 0xed, | ||
166 | }; | ||
167 | |||
168 | #define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev) | ||
169 | |||
170 | static int td028ttec1_panel_connect(struct omap_dss_device *dssdev) | ||
171 | { | ||
172 | struct panel_drv_data *ddata = to_panel_data(dssdev); | ||
173 | struct omap_dss_device *in = ddata->in; | ||
174 | int r; | ||
175 | |||
176 | if (omapdss_device_is_connected(dssdev)) | ||
177 | return 0; | ||
178 | |||
179 | r = in->ops.dpi->connect(in, dssdev); | ||
180 | if (r) | ||
181 | return r; | ||
182 | |||
183 | return 0; | ||
184 | } | ||
185 | |||
186 | static void td028ttec1_panel_disconnect(struct omap_dss_device *dssdev) | ||
187 | { | ||
188 | struct panel_drv_data *ddata = to_panel_data(dssdev); | ||
189 | struct omap_dss_device *in = ddata->in; | ||
190 | |||
191 | if (!omapdss_device_is_connected(dssdev)) | ||
192 | return; | ||
193 | |||
194 | in->ops.dpi->disconnect(in, dssdev); | ||
195 | } | ||
196 | |||
197 | static int td028ttec1_panel_enable(struct omap_dss_device *dssdev) | ||
198 | { | ||
199 | struct panel_drv_data *ddata = to_panel_data(dssdev); | ||
200 | struct omap_dss_device *in = ddata->in; | ||
201 | int r; | ||
202 | |||
203 | if (!omapdss_device_is_connected(dssdev)) | ||
204 | return -ENODEV; | ||
205 | |||
206 | if (omapdss_device_is_enabled(dssdev)) | ||
207 | return 0; | ||
208 | |||
209 | in->ops.dpi->set_data_lines(in, ddata->data_lines); | ||
210 | in->ops.dpi->set_timings(in, &ddata->videomode); | ||
211 | |||
212 | r = in->ops.dpi->enable(in); | ||
213 | if (r) | ||
214 | return r; | ||
215 | |||
216 | dev_dbg(dssdev->dev, "td028ttec1_panel_enable() - state %d\n", | ||
217 | dssdev->state); | ||
218 | |||
219 | /* three times command zero */ | ||
220 | r |= jbt_ret_write_0(ddata, 0x00); | ||
221 | usleep_range(1000, 2000); | ||
222 | r |= jbt_ret_write_0(ddata, 0x00); | ||
223 | usleep_range(1000, 2000); | ||
224 | r |= jbt_ret_write_0(ddata, 0x00); | ||
225 | usleep_range(1000, 2000); | ||
226 | |||
227 | if (r) { | ||
228 | dev_warn(dssdev->dev, "transfer error\n"); | ||
229 | goto transfer_err; | ||
230 | } | ||
231 | |||
232 | /* deep standby out */ | ||
233 | r |= jbt_reg_write_1(ddata, JBT_REG_POWER_ON_OFF, 0x17); | ||
234 | |||
235 | /* RGB I/F on, RAM write off, QVGA through, SIGCON enable */ | ||
236 | r |= jbt_reg_write_1(ddata, JBT_REG_DISPLAY_MODE, 0x80); | ||
237 | |||
238 | /* Quad mode off */ | ||
239 | r |= jbt_reg_write_1(ddata, JBT_REG_QUAD_RATE, 0x00); | ||
240 | |||
241 | /* AVDD on, XVDD on */ | ||
242 | r |= jbt_reg_write_1(ddata, JBT_REG_POWER_ON_OFF, 0x16); | ||
243 | |||
244 | /* Output control */ | ||
245 | r |= jbt_reg_write_2(ddata, JBT_REG_OUTPUT_CONTROL, 0xfff9); | ||
246 | |||
247 | /* Sleep mode off */ | ||
248 | r |= jbt_ret_write_0(ddata, JBT_REG_SLEEP_OUT); | ||
249 | |||
250 | /* at this point we have like 50% grey */ | ||
251 | |||
252 | /* initialize register set */ | ||
253 | r |= jbt_reg_write_1(ddata, JBT_REG_DISPLAY_MODE1, 0x01); | ||
254 | r |= jbt_reg_write_1(ddata, JBT_REG_DISPLAY_MODE2, 0x00); | ||
255 | r |= jbt_reg_write_1(ddata, JBT_REG_RGB_FORMAT, 0x60); | ||
256 | r |= jbt_reg_write_1(ddata, JBT_REG_DRIVE_SYSTEM, 0x10); | ||
257 | r |= jbt_reg_write_1(ddata, JBT_REG_BOOSTER_OP, 0x56); | ||
258 | r |= jbt_reg_write_1(ddata, JBT_REG_BOOSTER_MODE, 0x33); | ||
259 | r |= jbt_reg_write_1(ddata, JBT_REG_BOOSTER_FREQ, 0x11); | ||
260 | r |= jbt_reg_write_1(ddata, JBT_REG_BOOSTER_FREQ, 0x11); | ||
261 | r |= jbt_reg_write_1(ddata, JBT_REG_OPAMP_SYSCLK, 0x02); | ||
262 | r |= jbt_reg_write_1(ddata, JBT_REG_VSC_VOLTAGE, 0x2b); | ||
263 | r |= jbt_reg_write_1(ddata, JBT_REG_VCOM_VOLTAGE, 0x40); | ||
264 | r |= jbt_reg_write_1(ddata, JBT_REG_EXT_DISPL, 0x03); | ||
265 | r |= jbt_reg_write_1(ddata, JBT_REG_DCCLK_DCEV, 0x04); | ||
266 | /* | ||
267 | * default of 0x02 in JBT_REG_ASW_SLEW responsible for 72Hz requirement | ||
268 | * to avoid red / blue flicker | ||
269 | */ | ||
270 | r |= jbt_reg_write_1(ddata, JBT_REG_ASW_SLEW, 0x04); | ||
271 | r |= jbt_reg_write_1(ddata, JBT_REG_DUMMY_DISPLAY, 0x00); | ||
272 | |||
273 | r |= jbt_reg_write_1(ddata, JBT_REG_SLEEP_OUT_FR_A, 0x11); | ||
274 | r |= jbt_reg_write_1(ddata, JBT_REG_SLEEP_OUT_FR_B, 0x11); | ||
275 | r |= jbt_reg_write_1(ddata, JBT_REG_SLEEP_OUT_FR_C, 0x11); | ||
276 | r |= jbt_reg_write_2(ddata, JBT_REG_SLEEP_IN_LCCNT_D, 0x2040); | ||
277 | r |= jbt_reg_write_2(ddata, JBT_REG_SLEEP_IN_LCCNT_E, 0x60c0); | ||
278 | r |= jbt_reg_write_2(ddata, JBT_REG_SLEEP_IN_LCCNT_F, 0x1020); | ||
279 | r |= jbt_reg_write_2(ddata, JBT_REG_SLEEP_IN_LCCNT_G, 0x60c0); | ||
280 | |||
281 | r |= jbt_reg_write_2(ddata, JBT_REG_GAMMA1_FINE_1, 0x5533); | ||
282 | r |= jbt_reg_write_1(ddata, JBT_REG_GAMMA1_FINE_2, 0x00); | ||
283 | r |= jbt_reg_write_1(ddata, JBT_REG_GAMMA1_INCLINATION, 0x00); | ||
284 | r |= jbt_reg_write_1(ddata, JBT_REG_GAMMA1_BLUE_OFFSET, 0x00); | ||
285 | |||
286 | r |= jbt_reg_write_2(ddata, JBT_REG_HCLOCK_VGA, 0x1f0); | ||
287 | r |= jbt_reg_write_1(ddata, JBT_REG_BLANK_CONTROL, 0x02); | ||
288 | r |= jbt_reg_write_2(ddata, JBT_REG_BLANK_TH_TV, 0x0804); | ||
289 | |||
290 | r |= jbt_reg_write_1(ddata, JBT_REG_CKV_ON_OFF, 0x01); | ||
291 | r |= jbt_reg_write_2(ddata, JBT_REG_CKV_1_2, 0x0000); | ||
292 | |||
293 | r |= jbt_reg_write_2(ddata, JBT_REG_OEV_TIMING, 0x0d0e); | ||
294 | r |= jbt_reg_write_2(ddata, JBT_REG_ASW_TIMING_1, 0x11a4); | ||
295 | r |= jbt_reg_write_1(ddata, JBT_REG_ASW_TIMING_2, 0x0e); | ||
296 | |||
297 | r |= jbt_ret_write_0(ddata, JBT_REG_DISPLAY_ON); | ||
298 | |||
299 | dssdev->state = OMAP_DSS_DISPLAY_ACTIVE; | ||
300 | |||
301 | transfer_err: | ||
302 | |||
303 | return r ? -EIO : 0; | ||
304 | } | ||
305 | |||
306 | static void td028ttec1_panel_disable(struct omap_dss_device *dssdev) | ||
307 | { | ||
308 | struct panel_drv_data *ddata = to_panel_data(dssdev); | ||
309 | struct omap_dss_device *in = ddata->in; | ||
310 | |||
311 | if (!omapdss_device_is_enabled(dssdev)) | ||
312 | return; | ||
313 | |||
314 | dev_dbg(dssdev->dev, "td028ttec1_panel_disable()\n"); | ||
315 | |||
316 | jbt_ret_write_0(ddata, JBT_REG_DISPLAY_OFF); | ||
317 | jbt_reg_write_2(ddata, JBT_REG_OUTPUT_CONTROL, 0x8002); | ||
318 | jbt_ret_write_0(ddata, JBT_REG_SLEEP_IN); | ||
319 | jbt_reg_write_1(ddata, JBT_REG_POWER_ON_OFF, 0x00); | ||
320 | |||
321 | in->ops.dpi->disable(in); | ||
322 | |||
323 | dssdev->state = OMAP_DSS_DISPLAY_DISABLED; | ||
324 | } | ||
325 | |||
326 | static void td028ttec1_panel_set_timings(struct omap_dss_device *dssdev, | ||
327 | struct omap_video_timings *timings) | ||
328 | { | ||
329 | struct panel_drv_data *ddata = to_panel_data(dssdev); | ||
330 | struct omap_dss_device *in = ddata->in; | ||
331 | |||
332 | ddata->videomode = *timings; | ||
333 | dssdev->panel.timings = *timings; | ||
334 | |||
335 | in->ops.dpi->set_timings(in, timings); | ||
336 | } | ||
337 | |||
338 | static void td028ttec1_panel_get_timings(struct omap_dss_device *dssdev, | ||
339 | struct omap_video_timings *timings) | ||
340 | { | ||
341 | struct panel_drv_data *ddata = to_panel_data(dssdev); | ||
342 | |||
343 | *timings = ddata->videomode; | ||
344 | } | ||
345 | |||
346 | static int td028ttec1_panel_check_timings(struct omap_dss_device *dssdev, | ||
347 | struct omap_video_timings *timings) | ||
348 | { | ||
349 | struct panel_drv_data *ddata = to_panel_data(dssdev); | ||
350 | struct omap_dss_device *in = ddata->in; | ||
351 | |||
352 | return in->ops.dpi->check_timings(in, timings); | ||
353 | } | ||
354 | |||
355 | static struct omap_dss_driver td028ttec1_ops = { | ||
356 | .connect = td028ttec1_panel_connect, | ||
357 | .disconnect = td028ttec1_panel_disconnect, | ||
358 | |||
359 | .enable = td028ttec1_panel_enable, | ||
360 | .disable = td028ttec1_panel_disable, | ||
361 | |||
362 | .set_timings = td028ttec1_panel_set_timings, | ||
363 | .get_timings = td028ttec1_panel_get_timings, | ||
364 | .check_timings = td028ttec1_panel_check_timings, | ||
365 | }; | ||
366 | |||
367 | static int td028ttec1_panel_probe_pdata(struct spi_device *spi) | ||
368 | { | ||
369 | const struct panel_tpo_td028ttec1_platform_data *pdata; | ||
370 | struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev); | ||
371 | struct omap_dss_device *dssdev, *in; | ||
372 | |||
373 | pdata = dev_get_platdata(&spi->dev); | ||
374 | |||
375 | in = omap_dss_find_output(pdata->source); | ||
376 | if (in == NULL) { | ||
377 | dev_err(&spi->dev, "failed to find video source '%s'\n", | ||
378 | pdata->source); | ||
379 | return -EPROBE_DEFER; | ||
380 | } | ||
381 | |||
382 | ddata->in = in; | ||
383 | |||
384 | ddata->data_lines = pdata->data_lines; | ||
385 | |||
386 | dssdev = &ddata->dssdev; | ||
387 | dssdev->name = pdata->name; | ||
388 | |||
389 | return 0; | ||
390 | } | ||
391 | |||
392 | static int td028ttec1_panel_probe(struct spi_device *spi) | ||
393 | { | ||
394 | struct panel_drv_data *ddata; | ||
395 | struct omap_dss_device *dssdev; | ||
396 | int r; | ||
397 | |||
398 | dev_dbg(&spi->dev, "%s\n", __func__); | ||
399 | |||
400 | spi->bits_per_word = 9; | ||
401 | spi->mode = SPI_MODE_3; | ||
402 | |||
403 | r = spi_setup(spi); | ||
404 | if (r < 0) { | ||
405 | dev_err(&spi->dev, "spi_setup failed: %d\n", r); | ||
406 | return r; | ||
407 | } | ||
408 | |||
409 | ddata = devm_kzalloc(&spi->dev, sizeof(*ddata), GFP_KERNEL); | ||
410 | if (ddata == NULL) | ||
411 | return -ENOMEM; | ||
412 | |||
413 | dev_set_drvdata(&spi->dev, ddata); | ||
414 | |||
415 | ddata->spi_dev = spi; | ||
416 | |||
417 | if (dev_get_platdata(&spi->dev)) { | ||
418 | r = td028ttec1_panel_probe_pdata(spi); | ||
419 | if (r) | ||
420 | return r; | ||
421 | } else { | ||
422 | return -ENODEV; | ||
423 | } | ||
424 | |||
425 | ddata->videomode = td028ttec1_panel_timings; | ||
426 | |||
427 | dssdev = &ddata->dssdev; | ||
428 | dssdev->dev = &spi->dev; | ||
429 | dssdev->driver = &td028ttec1_ops; | ||
430 | dssdev->type = OMAP_DISPLAY_TYPE_DPI; | ||
431 | dssdev->owner = THIS_MODULE; | ||
432 | dssdev->panel.timings = ddata->videomode; | ||
433 | dssdev->phy.dpi.data_lines = ddata->data_lines; | ||
434 | |||
435 | r = omapdss_register_display(dssdev); | ||
436 | if (r) { | ||
437 | dev_err(&spi->dev, "Failed to register panel\n"); | ||
438 | goto err_reg; | ||
439 | } | ||
440 | |||
441 | return 0; | ||
442 | |||
443 | err_reg: | ||
444 | omap_dss_put_device(ddata->in); | ||
445 | return r; | ||
446 | } | ||
447 | |||
448 | static int td028ttec1_panel_remove(struct spi_device *spi) | ||
449 | { | ||
450 | struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev); | ||
451 | struct omap_dss_device *dssdev = &ddata->dssdev; | ||
452 | struct omap_dss_device *in = ddata->in; | ||
453 | |||
454 | dev_dbg(&ddata->spi_dev->dev, "%s\n", __func__); | ||
455 | |||
456 | omapdss_unregister_display(dssdev); | ||
457 | |||
458 | td028ttec1_panel_disable(dssdev); | ||
459 | td028ttec1_panel_disconnect(dssdev); | ||
460 | |||
461 | omap_dss_put_device(in); | ||
462 | |||
463 | return 0; | ||
464 | } | ||
465 | |||
466 | static struct spi_driver td028ttec1_spi_driver = { | ||
467 | .probe = td028ttec1_panel_probe, | ||
468 | .remove = td028ttec1_panel_remove, | ||
469 | |||
470 | .driver = { | ||
471 | .name = "panel-tpo-td028ttec1", | ||
472 | .owner = THIS_MODULE, | ||
473 | }, | ||
474 | }; | ||
475 | |||
476 | module_spi_driver(td028ttec1_spi_driver); | ||
477 | |||
478 | MODULE_AUTHOR("H. Nikolaus Schaller <hns@goldelico.com>"); | ||
479 | MODULE_DESCRIPTION("Toppoly TD028TTEC1 panel driver"); | ||
480 | MODULE_LICENSE("GPL"); | ||