1 files changed, 31 insertions, 48 deletions

diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 751a533a4347..e02dc3d643c7 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -652,69 +652,41 @@ static void pl2303_set_termios(struct tty_struct *tty,
         kfree(buf);
 }
 
-static void pl2303_close(struct tty_struct *tty,
-                        struct usb_serial_port *port, struct file *filp)
+static void pl2303_dtr_rts(struct usb_serial_port *port, int on)
+{
+        struct pl2303_private *priv = usb_get_serial_port_data(port);
+        unsigned long flags;
+        u8 control;
+
+        spin_lock_irqsave(&priv->lock, flags);
+        /* Change DTR and RTS */
+        if (on)
+                priv->line_control |= (CONTROL_DTR | CONTROL_RTS);
+        else
+                priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
+        control = priv->line_control;
+        spin_unlock_irqrestore(&priv->lock, flags);
+        set_control_lines(port->serial->dev, control);
+}
+
+static void pl2303_close(struct usb_serial_port *port)
 {
         struct pl2303_private *priv = usb_get_serial_port_data(port);
         unsigned long flags;
-        unsigned int c_cflag;
-        int bps;
-        long timeout;
-        wait_queue_t wait;
 
         dbg("%s - port %d", __func__, port->number);
 
-        /* wait for data to drain from the buffer */
         spin_lock_irqsave(&priv->lock, flags);
-        timeout = PL2303_CLOSING_WAIT;
-        init_waitqueue_entry(&wait, current);
-        add_wait_queue(&tty->write_wait, &wait);
-        for (;;) {
-                set_current_state(TASK_INTERRUPTIBLE);
-                if (pl2303_buf_data_avail(priv->buf) == 0 ||
-                    timeout == 0 || signal_pending(current) ||
-                    port->serial->disconnected)
-                        break;
-                spin_unlock_irqrestore(&priv->lock, flags);
-                timeout = schedule_timeout(timeout);
-                spin_lock_irqsave(&priv->lock, flags);
-        }
-        set_current_state(TASK_RUNNING);
-        remove_wait_queue(&tty->write_wait, &wait);
         /* clear out any remaining data in the buffer */
         pl2303_buf_clear(priv->buf);
         spin_unlock_irqrestore(&priv->lock, flags);
 
-        /* wait for characters to drain from the device */
-        /* (this is long enough for the entire 256 byte */
-        /* pl2303 hardware buffer to drain with no flow */
-        /* control for data rates of 1200 bps or more, */
-        /* for lower rates we should really know how much */
-        /* data is in the buffer to compute a delay */
-        /* that is not unnecessarily long) */
-        bps = tty_get_baud_rate(tty);
-        if (bps > 1200)
-                timeout = max((HZ*2560)/bps, HZ/10);
-        else
-                timeout = 2*HZ;
-        schedule_timeout_interruptible(timeout);
-
         /* shutdown our urbs */
         dbg("%s - shutting down urbs", __func__);
         usb_kill_urb(port->write_urb);
         usb_kill_urb(port->read_urb);
         usb_kill_urb(port->interrupt_in_urb);
 
-        if (tty) {
-                c_cflag = tty->termios->c_cflag;
-                if (c_cflag & HUPCL) {
-                        /* drop DTR and RTS */
-                        spin_lock_irqsave(&priv->lock, flags);
-                        priv->line_control = 0;
-                        spin_unlock_irqrestore(&priv->lock, flags);
-                        set_control_lines(port->serial->dev, 0);
-                }
-        }
 }
 
 static int pl2303_open(struct tty_struct *tty,
@@ -748,7 +720,7 @@ static int pl2303_open(struct tty_struct *tty,
         if (result) {
                 dev_err(&port->dev, "%s - failed submitting read urb,"
                         " error %d\n", __func__, result);
-                pl2303_close(tty, port, NULL);
+                pl2303_close(port);
                 return -EPROTO;
         }
 
@@ -758,9 +730,10 @@ static int pl2303_open(struct tty_struct *tty,
         if (result) {
                 dev_err(&port->dev, "%s - failed submitting interrupt urb,"
                         " error %d\n", __func__, result);
-                pl2303_close(tty, port, NULL);
+                pl2303_close(port);
                 return -EPROTO;
         }
+        port->port.drain_delay = 256;
         return 0;
 }
 
@@ -821,6 +794,14 @@ static int pl2303_tiocmget(struct tty_struct *tty, struct file *file)
         return result;
 }
 
+static int pl2303_carrier_raised(struct usb_serial_port *port)
+{
+        struct pl2303_private *priv = usb_get_serial_port_data(port);
+        if (priv->line_status & UART_DCD)
+                return 1;
+        return 0;
+}
+
 static int wait_modem_info(struct usb_serial_port *port, unsigned int arg)
 {
         struct pl2303_private *priv = usb_get_serial_port_data(port);
@@ -1125,6 +1106,8 @@ static struct usb_serial_driver pl2303_device = {
         .num_ports =            1,
         .open =                 pl2303_open,
         .close =                pl2303_close,
+        .dtr_rts =              pl2303_dtr_rts,
+        .carrier_raised =       pl2303_carrier_raised,
         .write =                pl2303_write,
         .ioctl =                pl2303_ioctl,
         .break_ctl =            pl2303_break_ctl,