aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/usb/phy
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/phy')
-rw-r--r--drivers/usb/phy/Kconfig8
-rw-r--r--drivers/usb/phy/Makefile1
-rw-r--r--drivers/usb/phy/mv_u3d_phy.c345
-rw-r--r--drivers/usb/phy/mv_u3d_phy.h105
4 files changed, 459 insertions, 0 deletions
diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index e7cf84f0751a..2838adb225e8 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -15,3 +15,11 @@ config USB_ISP1301
15 15
16 To compile this driver as a module, choose M here: the 16 To compile this driver as a module, choose M here: the
17 module will be called isp1301. 17 module will be called isp1301.
18
19config MV_U3D_PHY
20 bool "Marvell USB 3.0 PHY controller Driver"
21 depends on USB_MV_U3D
22 select USB_OTG_UTILS
23 help
24 Enable this to support Marvell USB 3.0 phy controller for Marvell
25 SoC.
diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
index eca095b1a890..cf38f08c818f 100644
--- a/drivers/usb/phy/Makefile
+++ b/drivers/usb/phy/Makefile
@@ -5,3 +5,4 @@
5ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG 5ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG
6 6
7obj-$(CONFIG_USB_ISP1301) += isp1301.o 7obj-$(CONFIG_USB_ISP1301) += isp1301.o
8obj-$(CONFIG_MV_U3D_PHY) += mv_u3d_phy.o
diff --git a/drivers/usb/phy/mv_u3d_phy.c b/drivers/usb/phy/mv_u3d_phy.c
new file mode 100644
index 000000000000..9f1c5d3c60ec
--- /dev/null
+++ b/drivers/usb/phy/mv_u3d_phy.c
@@ -0,0 +1,345 @@
1/*
2 * Copyright (C) 2011 Marvell International Ltd. All rights reserved.
3 *
4 * This program is free software; you can redistribute it and/or modify it
5 * under the terms and conditions of the GNU General Public License,
6 * version 2, as published by the Free Software Foundation.
7 */
8
9#include <linux/module.h>
10#include <linux/platform_device.h>
11#include <linux/clk.h>
12#include <linux/delay.h>
13#include <linux/err.h>
14#include <linux/io.h>
15#include <linux/usb/otg.h>
16#include <linux/platform_data/mv_usb.h>
17
18#include "mv_u3d_phy.h"
19
20/*
21 * struct mv_u3d_phy - transceiver driver state
22 * @phy: transceiver structure
23 * @dev: The parent device supplied to the probe function
24 * @clk: usb phy clock
25 * @base: usb phy register memory base
26 */
27struct mv_u3d_phy {
28 struct usb_phy phy;
29 struct mv_usb_platform_data *plat;
30 struct device *dev;
31 struct clk *clk;
32 void __iomem *base;
33};
34
35static u32 mv_u3d_phy_read(void __iomem *base, u32 reg)
36{
37 void __iomem *addr, *data;
38
39 addr = base;
40 data = base + 0x4;
41
42 writel_relaxed(reg, addr);
43 return readl_relaxed(data);
44}
45
46static void mv_u3d_phy_set(void __iomem *base, u32 reg, u32 value)
47{
48 void __iomem *addr, *data;
49 u32 tmp;
50
51 addr = base;
52 data = base + 0x4;
53
54 writel_relaxed(reg, addr);
55 tmp = readl_relaxed(data);
56 tmp |= value;
57 writel_relaxed(tmp, data);
58}
59
60static void mv_u3d_phy_clear(void __iomem *base, u32 reg, u32 value)
61{
62 void __iomem *addr, *data;
63 u32 tmp;
64
65 addr = base;
66 data = base + 0x4;
67
68 writel_relaxed(reg, addr);
69 tmp = readl_relaxed(data);
70 tmp &= ~value;
71 writel_relaxed(tmp, data);
72}
73
74static void mv_u3d_phy_write(void __iomem *base, u32 reg, u32 value)
75{
76 void __iomem *addr, *data;
77
78 addr = base;
79 data = base + 0x4;
80
81 writel_relaxed(reg, addr);
82 writel_relaxed(value, data);
83}
84
85void mv_u3d_phy_shutdown(struct usb_phy *phy)
86{
87 struct mv_u3d_phy *mv_u3d_phy;
88 void __iomem *base;
89 u32 val;
90
91 mv_u3d_phy = container_of(phy, struct mv_u3d_phy, phy);
92 base = mv_u3d_phy->base;
93
94 /* Power down Reference Analog current, bit 15
95 * Power down PLL, bit 14
96 * Power down Receiver, bit 13
97 * Power down Transmitter, bit 12
98 * of USB3_POWER_PLL_CONTROL register
99 */
100 val = mv_u3d_phy_read(base, USB3_POWER_PLL_CONTROL);
101 val &= ~(USB3_POWER_PLL_CONTROL_PU);
102 mv_u3d_phy_write(base, USB3_POWER_PLL_CONTROL, val);
103
104 if (mv_u3d_phy->clk)
105 clk_disable(mv_u3d_phy->clk);
106}
107
108static int mv_u3d_phy_init(struct usb_phy *phy)
109{
110 struct mv_u3d_phy *mv_u3d_phy;
111 void __iomem *base;
112 u32 val, count;
113
114 /* enable usb3 phy */
115 mv_u3d_phy = container_of(phy, struct mv_u3d_phy, phy);
116
117 if (mv_u3d_phy->clk)
118 clk_enable(mv_u3d_phy->clk);
119
120 base = mv_u3d_phy->base;
121
122 val = mv_u3d_phy_read(base, USB3_POWER_PLL_CONTROL);
123 val &= ~(USB3_POWER_PLL_CONTROL_PU_MASK);
124 val |= 0xF << USB3_POWER_PLL_CONTROL_PU_SHIFT;
125 mv_u3d_phy_write(base, USB3_POWER_PLL_CONTROL, val);
126 udelay(100);
127
128 mv_u3d_phy_write(base, USB3_RESET_CONTROL,
129 USB3_RESET_CONTROL_RESET_PIPE);
130 udelay(100);
131
132 mv_u3d_phy_write(base, USB3_RESET_CONTROL,
133 USB3_RESET_CONTROL_RESET_PIPE
134 | USB3_RESET_CONTROL_RESET_PHY);
135 udelay(100);
136
137 val = mv_u3d_phy_read(base, USB3_POWER_PLL_CONTROL);
138 val &= ~(USB3_POWER_PLL_CONTROL_REF_FREF_SEL_MASK
139 | USB3_POWER_PLL_CONTROL_PHY_MODE_MASK);
140 val |= (USB3_PLL_25MHZ << USB3_POWER_PLL_CONTROL_REF_FREF_SEL_SHIFT)
141 | (0x5 << USB3_POWER_PLL_CONTROL_PHY_MODE_SHIFT);
142 mv_u3d_phy_write(base, USB3_POWER_PLL_CONTROL, val);
143 udelay(100);
144
145 mv_u3d_phy_clear(base, USB3_KVCO_CALI_CONTROL,
146 USB3_KVCO_CALI_CONTROL_USE_MAX_PLL_RATE_MASK);
147 udelay(100);
148
149 val = mv_u3d_phy_read(base, USB3_SQUELCH_FFE);
150 val &= ~(USB3_SQUELCH_FFE_FFE_CAP_SEL_MASK
151 | USB3_SQUELCH_FFE_FFE_RES_SEL_MASK
152 | USB3_SQUELCH_FFE_SQ_THRESH_IN_MASK);
153 val |= ((0xD << USB3_SQUELCH_FFE_FFE_CAP_SEL_SHIFT)
154 | (0x7 << USB3_SQUELCH_FFE_FFE_RES_SEL_SHIFT)
155 | (0x8 << USB3_SQUELCH_FFE_SQ_THRESH_IN_SHIFT));
156 mv_u3d_phy_write(base, USB3_SQUELCH_FFE, val);
157 udelay(100);
158
159 val = mv_u3d_phy_read(base, USB3_GEN1_SET0);
160 val &= ~USB3_GEN1_SET0_G1_TX_SLEW_CTRL_EN_MASK;
161 val |= 1 << USB3_GEN1_SET0_G1_TX_EMPH_EN_SHIFT;
162 mv_u3d_phy_write(base, USB3_GEN1_SET0, val);
163 udelay(100);
164
165 val = mv_u3d_phy_read(base, USB3_GEN2_SET0);
166 val &= ~(USB3_GEN2_SET0_G2_TX_AMP_MASK
167 | USB3_GEN2_SET0_G2_TX_EMPH_AMP_MASK
168 | USB3_GEN2_SET0_G2_TX_SLEW_CTRL_EN_MASK);
169 val |= ((0x14 << USB3_GEN2_SET0_G2_TX_AMP_SHIFT)
170 | (1 << USB3_GEN2_SET0_G2_TX_AMP_ADJ_SHIFT)
171 | (0xA << USB3_GEN2_SET0_G2_TX_EMPH_AMP_SHIFT)
172 | (1 << USB3_GEN2_SET0_G2_TX_EMPH_EN_SHIFT));
173 mv_u3d_phy_write(base, USB3_GEN2_SET0, val);
174 udelay(100);
175
176 mv_u3d_phy_read(base, USB3_TX_EMPPH);
177 val &= ~(USB3_TX_EMPPH_AMP_MASK
178 | USB3_TX_EMPPH_EN_MASK
179 | USB3_TX_EMPPH_AMP_FORCE_MASK
180 | USB3_TX_EMPPH_PAR1_MASK
181 | USB3_TX_EMPPH_PAR2_MASK);
182 val |= ((0xB << USB3_TX_EMPPH_AMP_SHIFT)
183 | (1 << USB3_TX_EMPPH_EN_SHIFT)
184 | (1 << USB3_TX_EMPPH_AMP_FORCE_SHIFT)
185 | (0x1C << USB3_TX_EMPPH_PAR1_SHIFT)
186 | (1 << USB3_TX_EMPPH_PAR2_SHIFT));
187
188 mv_u3d_phy_write(base, USB3_TX_EMPPH, val);
189 udelay(100);
190
191 val = mv_u3d_phy_read(base, USB3_GEN2_SET1);
192 val &= ~(USB3_GEN2_SET1_G2_RX_SELMUPI_MASK
193 | USB3_GEN2_SET1_G2_RX_SELMUPF_MASK
194 | USB3_GEN2_SET1_G2_RX_SELMUFI_MASK
195 | USB3_GEN2_SET1_G2_RX_SELMUFF_MASK);
196 val |= ((1 << USB3_GEN2_SET1_G2_RX_SELMUPI_SHIFT)
197 | (1 << USB3_GEN2_SET1_G2_RX_SELMUPF_SHIFT)
198 | (1 << USB3_GEN2_SET1_G2_RX_SELMUFI_SHIFT)
199 | (1 << USB3_GEN2_SET1_G2_RX_SELMUFF_SHIFT));
200 mv_u3d_phy_write(base, USB3_GEN2_SET1, val);
201 udelay(100);
202
203 val = mv_u3d_phy_read(base, USB3_DIGITAL_LOOPBACK_EN);
204 val &= ~USB3_DIGITAL_LOOPBACK_EN_SEL_BITS_MASK;
205 val |= 1 << USB3_DIGITAL_LOOPBACK_EN_SEL_BITS_SHIFT;
206 mv_u3d_phy_write(base, USB3_DIGITAL_LOOPBACK_EN, val);
207 udelay(100);
208
209 val = mv_u3d_phy_read(base, USB3_IMPEDANCE_TX_SSC);
210 val &= ~USB3_IMPEDANCE_TX_SSC_SSC_AMP_MASK;
211 val |= 0xC << USB3_IMPEDANCE_TX_SSC_SSC_AMP_SHIFT;
212 mv_u3d_phy_write(base, USB3_IMPEDANCE_TX_SSC, val);
213 udelay(100);
214
215 val = mv_u3d_phy_read(base, USB3_IMPEDANCE_CALI_CTRL);
216 val &= ~USB3_IMPEDANCE_CALI_CTRL_IMP_CAL_THR_MASK;
217 val |= 0x4 << USB3_IMPEDANCE_CALI_CTRL_IMP_CAL_THR_SHIFT;
218 mv_u3d_phy_write(base, USB3_IMPEDANCE_CALI_CTRL, val);
219 udelay(100);
220
221 val = mv_u3d_phy_read(base, USB3_PHY_ISOLATION_MODE);
222 val &= ~(USB3_PHY_ISOLATION_MODE_PHY_GEN_RX_MASK
223 | USB3_PHY_ISOLATION_MODE_PHY_GEN_TX_MASK
224 | USB3_PHY_ISOLATION_MODE_TX_DRV_IDLE_MASK);
225 val |= ((1 << USB3_PHY_ISOLATION_MODE_PHY_GEN_RX_SHIFT)
226 | (1 << USB3_PHY_ISOLATION_MODE_PHY_GEN_TX_SHIFT));
227 mv_u3d_phy_write(base, USB3_PHY_ISOLATION_MODE, val);
228 udelay(100);
229
230 val = mv_u3d_phy_read(base, USB3_TXDETRX);
231 val &= ~(USB3_TXDETRX_VTHSEL_MASK);
232 val |= 0x1 << USB3_TXDETRX_VTHSEL_SHIFT;
233 mv_u3d_phy_write(base, USB3_TXDETRX, val);
234 udelay(100);
235
236 dev_dbg(mv_u3d_phy->dev, "start calibration\n");
237
238calstart:
239 /* Perform Manual Calibration */
240 mv_u3d_phy_set(base, USB3_KVCO_CALI_CONTROL,
241 1 << USB3_KVCO_CALI_CONTROL_CAL_START_SHIFT);
242
243 mdelay(1);
244
245 count = 0;
246 while (1) {
247 val = mv_u3d_phy_read(base, USB3_KVCO_CALI_CONTROL);
248 if (val & (1 << USB3_KVCO_CALI_CONTROL_CAL_DONE_SHIFT))
249 break;
250 else if (count > 50) {
251 dev_dbg(mv_u3d_phy->dev, "calibration failure, retry...\n");
252 goto calstart;
253 }
254 count++;
255 mdelay(1);
256 }
257
258 /* active PIPE interface */
259 mv_u3d_phy_write(base, USB3_PIPE_SM_CTRL,
260 1 << USB3_PIPE_SM_CTRL_PHY_INIT_DONE);
261
262 return 0;
263}
264
265static int __devinit mv_u3d_phy_probe(struct platform_device *pdev)
266{
267 struct mv_u3d_phy *mv_u3d_phy;
268 struct mv_usb_platform_data *pdata;
269 struct device *dev = &pdev->dev;
270 struct resource *res;
271 void __iomem *phy_base;
272 int ret;
273
274 pdata = pdev->dev.platform_data;
275 if (!pdata) {
276 dev_err(&pdev->dev, "%s: no platform data defined\n", __func__);
277 return -EINVAL;
278 }
279
280 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
281 if (!res) {
282 dev_err(dev, "missing mem resource\n");
283 return -ENODEV;
284 }
285
286 phy_base = devm_request_and_ioremap(dev, res);
287 if (!phy_base) {
288 dev_err(dev, "%s: register mapping failed\n", __func__);
289 return -ENXIO;
290 }
291
292 mv_u3d_phy = devm_kzalloc(dev, sizeof(*mv_u3d_phy), GFP_KERNEL);
293 if (!mv_u3d_phy)
294 return -ENOMEM;
295
296 mv_u3d_phy->dev = &pdev->dev;
297 mv_u3d_phy->plat = pdata;
298 mv_u3d_phy->base = phy_base;
299 mv_u3d_phy->phy.dev = mv_u3d_phy->dev;
300 mv_u3d_phy->phy.label = "mv-u3d-phy";
301 mv_u3d_phy->phy.init = mv_u3d_phy_init;
302 mv_u3d_phy->phy.shutdown = mv_u3d_phy_shutdown;
303
304 ret = usb_add_phy(&mv_u3d_phy->phy, USB_PHY_TYPE_USB3);
305 if (ret)
306 goto err;
307
308 if (!mv_u3d_phy->clk)
309 mv_u3d_phy->clk = clk_get(mv_u3d_phy->dev, "u3dphy");
310
311 platform_set_drvdata(pdev, mv_u3d_phy);
312
313 dev_info(&pdev->dev, "Initialized Marvell USB 3.0 PHY\n");
314err:
315 return ret;
316}
317
318static int __exit mv_u3d_phy_remove(struct platform_device *pdev)
319{
320 struct mv_u3d_phy *mv_u3d_phy = platform_get_drvdata(pdev);
321
322 usb_remove_phy(&mv_u3d_phy->phy);
323
324 if (mv_u3d_phy->clk) {
325 clk_put(mv_u3d_phy->clk);
326 mv_u3d_phy->clk = NULL;
327 }
328
329 return 0;
330}
331
332static struct platform_driver mv_u3d_phy_driver = {
333 .probe = mv_u3d_phy_probe,
334 .remove = __devexit_p(mv_u3d_phy_remove),
335 .driver = {
336 .name = "mv-u3d-phy",
337 .owner = THIS_MODULE,
338 },
339};
340
341module_platform_driver(mv_u3d_phy_driver);
342MODULE_DESCRIPTION("Marvell USB 3.0 PHY controller");
343MODULE_AUTHOR("Yu Xu <yuxu@marvell.com>");
344MODULE_LICENSE("GPL");
345MODULE_ALIAS("platform:mv-u3d-phy");
diff --git a/drivers/usb/phy/mv_u3d_phy.h b/drivers/usb/phy/mv_u3d_phy.h
new file mode 100644
index 000000000000..2a658cb9a527
--- /dev/null
+++ b/drivers/usb/phy/mv_u3d_phy.h
@@ -0,0 +1,105 @@
1/*
2 * Copyright (C) 2011 Marvell International Ltd. All rights reserved.
3 *
4 * This program is free software; you can redistribute it and/or modify it
5 * under the terms and conditions of the GNU General Public License,
6 * version 2, as published by the Free Software Foundation.
7 */
8
9#ifndef __MV_U3D_PHY_H
10#define __MV_U3D_PHY_H
11
12#define USB3_POWER_PLL_CONTROL 0x1
13#define USB3_KVCO_CALI_CONTROL 0x2
14#define USB3_IMPEDANCE_CALI_CTRL 0x3
15#define USB3_IMPEDANCE_TX_SSC 0x4
16#define USB3_SQUELCH_FFE 0x6
17#define USB3_GEN1_SET0 0xD
18#define USB3_GEN2_SET0 0xF
19#define USB3_GEN2_SET1 0x10
20#define USB3_DIGITAL_LOOPBACK_EN 0x23
21#define USB3_PHY_ISOLATION_MODE 0x26
22#define USB3_TXDETRX 0x48
23#define USB3_TX_EMPPH 0x5E
24#define USB3_RESET_CONTROL 0x90
25#define USB3_PIPE_SM_CTRL 0x91
26
27#define USB3_RESET_CONTROL_RESET_PIPE 0x1
28#define USB3_RESET_CONTROL_RESET_PHY 0x2
29
30#define USB3_POWER_PLL_CONTROL_REF_FREF_SEL_MASK (0x1F << 0)
31#define USB3_POWER_PLL_CONTROL_REF_FREF_SEL_SHIFT 0
32#define USB3_PLL_25MHZ 0x2
33#define USB3_PLL_26MHZ 0x5
34#define USB3_POWER_PLL_CONTROL_PHY_MODE_MASK (0x7 << 5)
35#define USB3_POWER_PLL_CONTROL_PHY_MODE_SHIFT 5
36#define USB3_POWER_PLL_CONTROL_PU_MASK (0xF << 12)
37#define USB3_POWER_PLL_CONTROL_PU_SHIFT 12
38#define USB3_POWER_PLL_CONTROL_PU (0xF << 12)
39
40#define USB3_KVCO_CALI_CONTROL_USE_MAX_PLL_RATE_MASK (0x1 << 12)
41#define USB3_KVCO_CALI_CONTROL_USE_MAX_PLL_RATE_SHIFT 12
42#define USB3_KVCO_CALI_CONTROL_CAL_DONE_SHIFT 14
43#define USB3_KVCO_CALI_CONTROL_CAL_START_SHIFT 15
44
45#define USB3_SQUELCH_FFE_FFE_CAP_SEL_MASK 0xF
46#define USB3_SQUELCH_FFE_FFE_CAP_SEL_SHIFT 0
47#define USB3_SQUELCH_FFE_FFE_RES_SEL_MASK (0x7 << 4)
48#define USB3_SQUELCH_FFE_FFE_RES_SEL_SHIFT 4
49#define USB3_SQUELCH_FFE_SQ_THRESH_IN_MASK (0x1F << 8)
50#define USB3_SQUELCH_FFE_SQ_THRESH_IN_SHIFT 8
51
52#define USB3_GEN1_SET0_G1_TX_SLEW_CTRL_EN_MASK (0x1 << 15)
53#define USB3_GEN1_SET0_G1_TX_EMPH_EN_SHIFT 11
54
55#define USB3_GEN2_SET0_G2_TX_AMP_MASK (0x1F << 1)
56#define USB3_GEN2_SET0_G2_TX_AMP_SHIFT 1
57#define USB3_GEN2_SET0_G2_TX_AMP_ADJ_SHIFT 6
58#define USB3_GEN2_SET0_G2_TX_EMPH_AMP_MASK (0xF << 7)
59#define USB3_GEN2_SET0_G2_TX_EMPH_AMP_SHIFT 7
60#define USB3_GEN2_SET0_G2_TX_EMPH_EN_MASK (0x1 << 11)
61#define USB3_GEN2_SET0_G2_TX_EMPH_EN_SHIFT 11
62#define USB3_GEN2_SET0_G2_TX_SLEW_CTRL_EN_MASK (0x1 << 15)
63#define USB3_GEN2_SET0_G2_TX_SLEW_CTRL_EN_SHIFT 15
64
65#define USB3_GEN2_SET1_G2_RX_SELMUPI_MASK (0x7 << 0)
66#define USB3_GEN2_SET1_G2_RX_SELMUPI_SHIFT 0
67#define USB3_GEN2_SET1_G2_RX_SELMUPF_MASK (0x7 << 3)
68#define USB3_GEN2_SET1_G2_RX_SELMUPF_SHIFT 3
69#define USB3_GEN2_SET1_G2_RX_SELMUFI_MASK (0x3 << 6)
70#define USB3_GEN2_SET1_G2_RX_SELMUFI_SHIFT 6
71#define USB3_GEN2_SET1_G2_RX_SELMUFF_MASK (0x3 << 8)
72#define USB3_GEN2_SET1_G2_RX_SELMUFF_SHIFT 8
73
74#define USB3_DIGITAL_LOOPBACK_EN_SEL_BITS_MASK (0x3 << 10)
75#define USB3_DIGITAL_LOOPBACK_EN_SEL_BITS_SHIFT 10
76
77#define USB3_IMPEDANCE_CALI_CTRL_IMP_CAL_THR_MASK (0x7 << 12)
78#define USB3_IMPEDANCE_CALI_CTRL_IMP_CAL_THR_SHIFT 12
79
80#define USB3_IMPEDANCE_TX_SSC_SSC_AMP_MASK (0x3F << 0)
81#define USB3_IMPEDANCE_TX_SSC_SSC_AMP_SHIFT 0
82
83#define USB3_PHY_ISOLATION_MODE_PHY_GEN_RX_MASK 0xF
84#define USB3_PHY_ISOLATION_MODE_PHY_GEN_RX_SHIFT 0
85#define USB3_PHY_ISOLATION_MODE_PHY_GEN_TX_MASK (0xF << 4)
86#define USB3_PHY_ISOLATION_MODE_PHY_GEN_TX_SHIFT 4
87#define USB3_PHY_ISOLATION_MODE_TX_DRV_IDLE_MASK (0x1 << 8)
88
89#define USB3_TXDETRX_VTHSEL_MASK (0x3 << 4)
90#define USB3_TXDETRX_VTHSEL_SHIFT 4
91
92#define USB3_TX_EMPPH_AMP_MASK (0xF << 0)
93#define USB3_TX_EMPPH_AMP_SHIFT 0
94#define USB3_TX_EMPPH_EN_MASK (0x1 << 6)
95#define USB3_TX_EMPPH_EN_SHIFT 6
96#define USB3_TX_EMPPH_AMP_FORCE_MASK (0x1 << 7)
97#define USB3_TX_EMPPH_AMP_FORCE_SHIFT 7
98#define USB3_TX_EMPPH_PAR1_MASK (0x1F << 8)
99#define USB3_TX_EMPPH_PAR1_SHIFT 8
100#define USB3_TX_EMPPH_PAR2_MASK (0x1 << 13)
101#define USB3_TX_EMPPH_PAR2_SHIFT 13
102
103#define USB3_PIPE_SM_CTRL_PHY_INIT_DONE 15
104
105#endif /* __MV_U3D_PHY_H */
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-18 09:34:36 -0500