1 files changed, 152 insertions, 0 deletions

diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig
new file mode 100644
index 000000000000..3a896954b3a9
--- /dev/null
+++ b/drivers/usb/misc/Kconfig
@@ -0,0 +1,152 @@
+#
+# USB Miscellaneous driver configuration
+#
+comment "USB Miscellaneous drivers"
+        depends on USB
+
+config USB_EMI62
+        tristate "EMI 6|2m USB Audio interface support"
+        depends on USB
+        ---help---
+          This driver loads firmware to Emagic EMI 6|2m low latency USB
+          Audio and Midi interface.
+
+          After firmware load the device is handled with standard linux
+          USB Audio driver.
+
+          This code is also available as a module ( = code which can be
+          inserted in and removed from the running kernel whenever you want).
+          The module will be called audio. If you want to compile it as a
+          module, say M here and read <file:Documentation/kbuild/modules.txt>.
+
+config USB_EMI26
+        tristate "EMI 2|6 USB Audio interface support"
+        depends on USB
+        ---help---
+          This driver loads firmware to Emagic EMI 2|6 low latency USB
+          Audio interface.
+
+          After firmware load the device is handled with standard linux
+          USB Audio driver.
+
+          To compile this driver as a module, choose M here: the
+          module will be called emi26.
+
+config USB_AUERSWALD
+        tristate "USB Auerswald ISDN support (EXPERIMENTAL)"
+        depends on USB && EXPERIMENTAL
+        help
+          Say Y here if you want to connect an Auerswald USB ISDN Device
+          to your computer's USB port.
+
+          To compile this driver as a module, choose M here: the
+          module will be called auerswald.
+
+config USB_RIO500
+        tristate "USB Diamond Rio500 support (EXPERIMENTAL)"
+        depends on USB && EXPERIMENTAL
+        help
+          Say Y here if you want to connect a USB Rio500 mp3 player to your
+          computer's USB port. Please read <file:Documentation/usb/rio.txt>
+          for more information.
+
+          To compile this driver as a module, choose M here: the
+          module will be called rio500.
+
+config USB_LEGOTOWER
+        tristate "USB Lego Infrared Tower support (EXPERIMENTAL)"
+        depends on USB && EXPERIMENTAL
+        help
+          Say Y here if you want to connect a USB Lego Infrared Tower to your
+          computer's USB port.
+
+          This code is also available as a module ( = code which can be
+          inserted in and removed from the running kernel whenever you want).
+          The module will be called legousbtower. If you want to compile it as
+          a module, say M here and read
+          <file:Documentation/kbuild/modules.txt>.
+
+config USB_LCD
+        tristate "USB LCD driver support"
+        depends on USB
+        help
+          Say Y here if you want to connect an USBLCD to your computer's
+          USB port. The USBLCD is a small USB interface board for
+          alphanumeric LCD modules. See <http://www.usblcd.de/> for more
+          information.
+
+          To compile this driver as a module, choose M here: the
+          module will be called usblcd.
+
+config USB_LED
+        tristate "USB LED driver support"
+        depends on USB
+        help
+          Say Y here if you want to connect an USBLED device to your 
+          computer's USB port.
+
+          To compile this driver as a module, choose M here: the
+          module will be called usbled.
+
+config USB_CYTHERM
+        tristate "Cypress USB thermometer driver support"
+        depends on USB
+        help
+          Say Y here if you want to connect a Cypress USB thermometer
+          device to your computer's USB port. This device is also known
+          as the Cypress USB Starter kit or demo board. The Elektor
+          magazine published a modified version of this device in issue 
+          #291.
+
+          To compile this driver as a module, choose M here: the
+          module will be called cytherm.
+
+config USB_PHIDGETKIT
+        tristate "USB PhidgetKit support"
+        depends on USB
+        help
+          Say Y here if you want to connect a PhidgetKit USB device from
+          Phidgets Inc.
+
+          To compile this driver as a module, choose M here: the
+          module will be called phidgetkit.
+
+config USB_PHIDGETSERVO
+        tristate "USB PhidgetServo support"
+        depends on USB
+        help
+          Say Y here if you want to connect an 1 or 4 Motor PhidgetServo 
+          servo controller version 2.0 or 3.0.
+
+          Phidgets Inc. has a web page at <http://www.phidgets.com/>.
+
+          To compile this driver as a module, choose M here: the
+          module will be called phidgetservo.
+
+config USB_IDMOUSE
+        tristate "Siemens ID USB Mouse Fingerprint sensor support"
+        depends on USB
+        help
+          Say Y here if you want to use the fingerprint sensor on
+          the Siemens ID Mouse. There is also a Siemens ID Mouse
+          _Professional_, which has not been tested with this driver,
+          but uses the same sensor and may therefore work.
+
+          This driver creates an entry "/dev/idmouseX" or "/dev/usb/idmouseX",
+          which can be used by, e.g.,"cat /dev/idmouse0 > fingerprint.pnm".
+
+          See also <http://www.fs.tum.de/~echtler/idmouse/>.
+
+source "drivers/usb/misc/sisusbvga/Kconfig"
+
+config USB_TEST
+        tristate "USB testing driver (DEVELOPMENT)"
+        depends on USB && USB_DEVICEFS && EXPERIMENTAL
+        help
+          This driver is for testing host controller software.  It is used
+          with specialized device firmware for regression and stress testing,
+          to help prevent problems from cropping up with "real" drivers.
+
+          See <http://www.linux-usb.org/usbtest/> for more information,
+          including sample test device firmware and "how to use it".
+