1 files changed, 268 insertions, 0 deletions

diff --git a/drivers/usb/input/itmtouch.c b/drivers/usb/input/itmtouch.c
new file mode 100644
index 000000000000..47dec6a1b344
--- /dev/null
+++ b/drivers/usb/input/itmtouch.c
@@ -0,0 +1,268 @@
+/******************************************************************************
+ * itmtouch.c  --  Driver for ITM touchscreen panel
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Based upon original work by Chris Collins <xfire-itmtouch@xware.cx>.
+ *
+ * Kudos to ITM for providing me with the datasheet for the panel,
+ * even though it was a day later than I had finished writing this
+ * driver.
+ *
+ * It has meant that I've been able to correct my interpretation of the
+ * protocol packets however.
+ *
+ * CC -- 2003/9/29
+ *
+ * History
+ * 1.0 & 1.1  2003 (CC) vojtech@suse.cz
+ *   Original version for 2.4.x kernels
+ *
+ * 1.2  02/03/2005 (HCE) hc@mivu.no
+ *   Complete rewrite to support Linux 2.6.10, thanks to mtouchusb.c for hints.
+ *   Unfortunately no calibration support at this time.
+ *
+ * 1.2.1  09/03/2005 (HCE) hc@mivu.no
+ *   Code cleanup and adjusting syntax to start matching kernel standards
+ *
+ *****************************************************************************/
+
+#include <linux/config.h>
+
+#ifdef CONFIG_USB_DEBUG
+        #define DEBUG
+#else
+        #undef DEBUG
+#endif
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/usb.h>
+
+/* only an 8 byte buffer necessary for a single packet */
+#define ITM_BUFSIZE                     8
+#define PATH_SIZE                       64
+
+#define USB_VENDOR_ID_ITMINC            0x0403
+#define USB_PRODUCT_ID_TOUCHPANEL       0xf9e9
+
+#define DRIVER_AUTHOR "Hans-Christian Egtvedt <hc@mivu.no>"
+#define DRIVER_VERSION "v1.2.1"
+#define DRIVER_DESC "USB ITM Inc Touch Panel Driver"
+#define DRIVER_LICENSE "GPL"
+
+MODULE_AUTHOR( DRIVER_AUTHOR );
+MODULE_DESCRIPTION( DRIVER_DESC );
+MODULE_LICENSE( DRIVER_LICENSE );
+
+struct itmtouch_dev {
+        struct usb_device       *usbdev; /* usb device */
+        struct input_dev        inputdev; /* input device */
+        struct urb              *readurb; /* urb */
+        char                    rbuf[ITM_BUFSIZE]; /* data */
+        int                     users;
+        char name[128];
+        char phys[64];
+};
+
+static struct usb_device_id itmtouch_ids [] = {
+        { USB_DEVICE(USB_VENDOR_ID_ITMINC, USB_PRODUCT_ID_TOUCHPANEL) },
+        { }
+};
+
+static void itmtouch_irq(struct urb *urb, struct pt_regs *regs)
+{
+        struct itmtouch_dev * itmtouch = urb->context;
+        unsigned char *data = urb->transfer_buffer;
+        struct input_dev *dev = &itmtouch->inputdev;
+        int retval;
+
+        switch (urb->status) {
+        case 0:
+                /* success */
+                break;
+        case -ETIMEDOUT:
+                /* this urb is timing out */
+                dbg("%s - urb timed out - was the device unplugged?",
+                    __FUNCTION__);
+                return;
+        case -ECONNRESET:
+        case -ENOENT:
+        case -ESHUTDOWN:
+                /* this urb is terminated, clean up */
+                dbg("%s - urb shutting down with status: %d",
+                    __FUNCTION__, urb->status);
+                return;
+        default:
+                dbg("%s - nonzero urb status received: %d",
+                    __FUNCTION__, urb->status);
+                goto exit;
+        }
+
+        input_regs(dev, regs);
+
+        /* if pressure has been released, then don't report X/Y */
+        if (data[7] & 0x20) {
+                input_report_abs(dev, ABS_X, (data[0] & 0x1F) << 7 | (data[3] & 0x7F));
+                input_report_abs(dev, ABS_Y, (data[1] & 0x1F) << 7 | (data[4] & 0x7F));
+        }
+
+        input_report_abs(dev, ABS_PRESSURE, (data[2] & 1) << 7 | (data[5] & 0x7F));
+        input_report_key(dev, BTN_TOUCH, ~data[7] & 0x20);
+        input_sync(dev);
+
+exit:
+        retval = usb_submit_urb (urb, GFP_ATOMIC);
+        if (retval)
+                printk(KERN_ERR "%s - usb_submit_urb failed with result: %d",
+                                __FUNCTION__, retval);
+}
+
+static int itmtouch_open(struct input_dev *input)
+{
+        struct itmtouch_dev *itmtouch = input->private;
+
+        itmtouch->readurb->dev = itmtouch->usbdev;
+
+        if (usb_submit_urb(itmtouch->readurb, GFP_KERNEL))
+                return -EIO;
+
+        return 0;
+}
+
+static void itmtouch_close(struct input_dev *input)
+{
+        struct itmtouch_dev *itmtouch = input->private;
+
+        usb_kill_urb(itmtouch->readurb);
+}
+
+static int itmtouch_probe(struct usb_interface *intf, const struct usb_device_id *id)
+{
+        struct itmtouch_dev *itmtouch;
+        struct usb_host_interface *interface;
+        struct usb_endpoint_descriptor *endpoint;
+        struct usb_device *udev = interface_to_usbdev(intf);
+        unsigned int pipe;
+        unsigned int maxp;
+        char path[PATH_SIZE];
+
+        interface = intf->cur_altsetting;
+        endpoint = &interface->endpoint[0].desc;
+
+        if (!(itmtouch = kcalloc(1, sizeof(struct itmtouch_dev), GFP_KERNEL))) {
+                err("%s - Out of memory.", __FUNCTION__);
+                return -ENOMEM;
+        }
+
+        itmtouch->usbdev = udev;
+
+        itmtouch->inputdev.private = itmtouch;
+        itmtouch->inputdev.open = itmtouch_open;
+        itmtouch->inputdev.close = itmtouch_close;
+
+        usb_make_path(udev, path, PATH_SIZE);
+
+        itmtouch->inputdev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+        itmtouch->inputdev.absbit[0] = BIT(ABS_X) | BIT(ABS_Y) | BIT(ABS_PRESSURE);
+        itmtouch->inputdev.keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
+
+        itmtouch->inputdev.name = itmtouch->name;
+        itmtouch->inputdev.phys = itmtouch->phys;
+        itmtouch->inputdev.id.bustype = BUS_USB;
+        itmtouch->inputdev.id.vendor = udev->descriptor.idVendor;
+        itmtouch->inputdev.id.product = udev->descriptor.idProduct;
+        itmtouch->inputdev.id.version = udev->descriptor.bcdDevice;
+        itmtouch->inputdev.dev = &intf->dev;
+
+        if (!strlen(itmtouch->name))
+                sprintf(itmtouch->name, "USB ITM touchscreen");
+
+        /* device limits */
+        /* as specified by the ITM datasheet, X and Y are 12bit,
+         * Z (pressure) is 8 bit. However, the fields are defined up
+         * to 14 bits for future possible expansion.
+         */
+        input_set_abs_params(&itmtouch->inputdev, ABS_X, 0, 0x0FFF, 2, 0);
+        input_set_abs_params(&itmtouch->inputdev, ABS_Y, 0, 0x0FFF, 2, 0);
+        input_set_abs_params(&itmtouch->inputdev, ABS_PRESSURE, 0, 0xFF, 2, 0);
+
+        /* initialise the URB so we can read from the transport stream */
+        pipe = usb_rcvintpipe(itmtouch->usbdev, endpoint->bEndpointAddress);
+        maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe));
+
+        if (maxp > ITM_BUFSIZE)
+                maxp = ITM_BUFSIZE;
+
+        itmtouch->readurb = usb_alloc_urb(0, GFP_KERNEL);
+
+        if (!itmtouch->readurb) {
+                dbg("%s - usb_alloc_urb failed: itmtouch->readurb", __FUNCTION__);
+                kfree(itmtouch);
+                return -ENOMEM;
+        }
+
+        usb_fill_int_urb(itmtouch->readurb, itmtouch->usbdev, pipe, itmtouch->rbuf,
+                         maxp, itmtouch_irq, itmtouch, endpoint->bInterval);
+
+        input_register_device(&itmtouch->inputdev);
+
+        printk(KERN_INFO "itmtouch: %s registered on %s\n", itmtouch->name, path);
+        usb_set_intfdata(intf, itmtouch);
+
+        return 0;
+}
+
+static void itmtouch_disconnect(struct usb_interface *intf)
+{
+        struct itmtouch_dev *itmtouch = usb_get_intfdata(intf);
+
+        usb_set_intfdata(intf, NULL);
+
+        if (itmtouch) {
+                input_unregister_device(&itmtouch->inputdev);
+                usb_kill_urb(itmtouch->readurb);
+                usb_free_urb(itmtouch->readurb);
+                kfree(itmtouch);
+        }
+}
+
+MODULE_DEVICE_TABLE(usb, itmtouch_ids);
+
+static struct usb_driver itmtouch_driver = {
+        .owner =        THIS_MODULE,
+        .name =         "itmtouch",
+        .probe =        itmtouch_probe,
+        .disconnect =   itmtouch_disconnect,
+        .id_table =     itmtouch_ids,
+};
+
+static int __init itmtouch_init(void)
+{
+        info(DRIVER_DESC " " DRIVER_VERSION);
+        info(DRIVER_AUTHOR);
+        return usb_register(&itmtouch_driver);
+}
+
+static void __exit itmtouch_exit(void)
+{
+        usb_deregister(&itmtouch_driver);
+}
+
+module_init(itmtouch_init);
+module_exit(itmtouch_exit);