1 files changed, 237 insertions, 0 deletions

diff --git a/drivers/usb/input/Kconfig b/drivers/usb/input/Kconfig
new file mode 100644
index 000000000000..d28e7eab6f98
--- /dev/null
+++ b/drivers/usb/input/Kconfig
@@ -0,0 +1,237 @@
+#
+# USB Input driver configuration
+#
+comment "USB Input Devices"
+        depends on USB
+
+config USB_HID
+        tristate "USB Human Interface Device (full HID) support"
+        depends on USB
+        ---help---
+          Say Y here if you want full HID support to connect keyboards,
+          mice, joysticks, graphic tablets, or any other HID based devices
+          to your computer via USB. You also need to select HID Input layer
+          support (below) if you want to use keyboards, mice, joysticks and
+          the like ... as well as Uninterruptible Power Supply (UPS) and
+          monitor control devices.
+
+          You can't use this driver and the HIDBP (Boot Protocol) keyboard
+          and mouse drivers at the same time. More information is available:
+          <file:Documentation/input/input.txt>.
+
+          If unsure, say Y.
+
+          To compile this driver as a module, choose M here: the
+          module will be called usbhid.
+
+comment "Input core support is needed for USB HID input layer or HIDBP support"
+        depends on USB_HID && INPUT=n
+
+config USB_HIDINPUT
+        bool "HID input layer support"
+        default y
+        depends on INPUT && USB_HID
+        help
+          Say Y here if you want to use a USB keyboard, mouse or joystick,
+          or any other HID input device.
+
+          If unsure, say Y.
+
+config HID_FF
+        bool "Force feedback support (EXPERIMENTAL)"
+        depends on USB_HIDINPUT && EXPERIMENTAL
+        help
+          Say Y here is you want force feedback support for a few HID devices.
+          See below for a list of supported devices.
+
+          See <file:Documentation/input/ff.txt> for a description of the force
+          feedback API.
+
+          If unsure, say N.
+
+config HID_PID
+        bool "PID Devices (Microsoft Sidewinder Force Feedback 2)"
+        depends on HID_FF
+        help
+          Say Y here if you have a PID-compliant joystick and wish to enable force
+          feedback for it. The Microsoft Sidewinder Force Feedback 2 is one such
+          device.
+
+config LOGITECH_FF
+        bool "Logitech WingMan *3D support"
+        depends on HID_FF
+        help
+          Say Y here if you have one of these devices:
+          - Logitech WingMan Cordless RumblePad
+          - Logitech WingMan Force 3D
+          and if you want to enable force feedback for them.
+          Note: if you say N here, this device will still be supported, but without
+          force feedback.
+
+config THRUSTMASTER_FF
+        bool "ThrustMaster FireStorm Dual Power 2 support (EXPERIMENTAL)"
+        depends on HID_FF && EXPERIMENTAL
+        help
+          Say Y here if you have a THRUSTMASTER FireStore Dual Power 2,
+          and want to enable force feedback support for it.
+          Note: if you say N here, this device will still be supported, but without
+          force feedback.
+
+config USB_HIDDEV
+        bool "/dev/hiddev raw HID device support"
+        depends on USB_HID
+        help
+          Say Y here if you want to support HID devices (from the USB
+          specification standpoint) that aren't strictly user interface
+          devices, like monitor controls and Uninterruptable Power Supplies.
+
+          This module supports these devices separately using a separate
+          event interface on /dev/usb/hiddevX (char 180:96 to 180:111).
+
+          If unsure, say Y.
+
+menu "USB HID Boot Protocol drivers"
+        depends on USB!=n && USB_HID!=y
+
+config USB_KBD
+        tristate "USB HIDBP Keyboard (simple Boot) support"
+        depends on USB && INPUT
+        ---help---
+          Say Y here only if you are absolutely sure that you don't want
+          to use the generic HID driver for your USB keyboard and prefer
+          to use the keyboard in its limited Boot Protocol mode instead.
+
+          This is almost certainly not what you want.  This is mostly
+          useful for embedded applications or simple keyboards.
+
+          To compile this driver as a module, choose M here: the
+          module will be called usbkbd.
+
+          If even remotely unsure, say N.
+
+config USB_MOUSE
+        tristate "USB HIDBP Mouse (simple Boot) support"
+        depends on USB && INPUT
+        ---help---
+          Say Y here only if you are absolutely sure that you don't want
+          to use the generic HID driver for your USB mouse and prefer
+          to use the mouse in its limited Boot Protocol mode instead.
+
+          This is almost certainly not what you want.  This is mostly
+          useful for embedded applications or simple mice.
+
+          To compile this driver as a module, choose M here: the
+          module will be called usbmouse.
+
+          If even remotely unsure, say N.
+
+endmenu
+
+config USB_AIPTEK
+        tristate "Aiptek 6000U/8000U tablet support"
+        depends on USB && INPUT
+        help
+          Say Y here if you want to use the USB version of the Aiptek 6000U
+          or Aiptek 8000U tablet.  Make sure to say Y to "Mouse support"
+          (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support"
+          (CONFIG_INPUT_EVDEV) as well.
+
+          To compile this driver as a module, choose M here: the
+          module will be called aiptek.
+
+config USB_WACOM
+        tristate "Wacom Intuos/Graphire tablet support"
+        depends on USB && INPUT
+        help
+          Say Y here if you want to use the USB version of the Wacom Intuos
+          or Graphire tablet.  Make sure to say Y to "Mouse support"
+          (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support"
+          (CONFIG_INPUT_EVDEV) as well.
+
+          To compile this driver as a module, choose M here: the
+          module will be called wacom.
+
+config USB_KBTAB
+        tristate "KB Gear JamStudio tablet support"
+        depends on USB && INPUT
+        help
+          Say Y here if you want to use the USB version of the KB Gear
+          JamStudio tablet.  Make sure to say Y to "Mouse support"
+          (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support"
+          (CONFIG_INPUT_EVDEV) as well.
+
+          To compile this driver as a module, choose M here: the
+          module will be called kbtab.
+
+config USB_POWERMATE
+        tristate "Griffin PowerMate and Contour Jog support"
+        depends on USB && INPUT
+        ---help---
+          Say Y here if you want to use Griffin PowerMate or Contour Jog devices.
+          These are aluminum dials which can measure clockwise and anticlockwise
+          rotation.  The dial also acts as a pushbutton.  The base contains an LED
+          which can be instructed to pulse or to switch to a particular intensity.
+
+          You can download userspace tools from
+          <http://sowerbutts.com/powermate/>.
+
+          To compile this driver as a module, choose M here: the
+          module will be called powermate.
+
+config USB_MTOUCH
+        tristate "MicroTouch USB Touchscreen Driver"
+        depends on USB && INPUT
+        ---help---
+          Say Y here if you want to use a MicroTouch (Now 3M) USB 
+          Touchscreen controller.
+
+          See <file:Documentation/usb/mtouch.txt> for additional information.
+
+          To compile this driver as a module, choose M here: the
+          module will be called mtouchusb.
+
+config USB_EGALAX
+        tristate "eGalax TouchKit USB Touchscreen Driver"
+        depends on USB && INPUT
+        ---help---
+          Say Y here if you want to use a eGalax TouchKit USB
+          Touchscreen controller.
+
+          The driver has been tested on a Xenarc 700TSV monitor
+          with eGalax touchscreen.
+
+          Have a look at <http://linux.chapter7.ch/touchkit/> for
+          a usage description and the required user-space stuff.
+
+          To compile this driver as a module, choose M here: the
+          module will be called touchkitusb.
+
+config USB_XPAD
+        tristate "X-Box gamepad support"
+        depends on USB && INPUT
+        ---help---
+          Say Y here if you want to use the X-Box pad with your computer.
+          Make sure to say Y to "Joystick support" (CONFIG_INPUT_JOYDEV)
+          and/or "Event interface support" (CONFIG_INPUT_EVDEV) as well.
+
+          For information about how to connect the X-Box pad to USB, see
+          <file:Documentation/input/xpad.txt>.
+
+          To compile this driver as a module, choose M here: the
+          module will be called xpad.
+          
+config USB_ATI_REMOTE
+        tristate "ATI / X10 USB RF remote control"
+        depends on USB && INPUT
+        ---help---
+          Say Y here if you want to use an ATI or X10 "Lola" USB remote control.
+          These are RF remotes with USB receivers. 
+          The ATI remote comes with many of ATI's All-In-Wonder video cards.
+          The X10 "Lola" remote is available at:
+             <http://www.x10.com/products/lola_sg1.htm>
+          This driver provides mouse pointer, left and right mouse buttons, 
+          and maps all the other remote buttons to keypress events.
+          
+          To compile this driver as a module, choose M here: the module will be
+          called ati_remote.
+