7 files changed, 56 insertions, 13 deletions

diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c
index afef7b0a4195..80be5472783a 100644
--- a/drivers/usb/host/ohci-pxa27x.c
+++ b/drivers/usb/host/ohci-pxa27x.c
@@ -312,8 +312,10 @@ int usb_hcd_pxa27x_probe (const struct hc_driver *driver, struct platform_device
                 return PTR_ERR(usb_clk);
 
         hcd = usb_create_hcd (driver, &pdev->dev, "pxa27x");
-        if (!hcd)
-                return -ENOMEM;
+        if (!hcd) {
+                retval = -ENOMEM;
+                goto err0;
+        }
 
         r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
         if (!r) {
@@ -368,6 +370,7 @@ int usb_hcd_pxa27x_probe (const struct hc_driver *driver, struct platform_device
         release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
  err1:
         usb_put_hcd(hcd);
+ err0:
         clk_put(usb_clk);
         return retval;
 }
diff --git a/drivers/usb/host/xhci-dbg.c b/drivers/usb/host/xhci-dbg.c
index 17d3e359ca62..e9b0f043455d 100644
--- a/drivers/usb/host/xhci-dbg.c
+++ b/drivers/usb/host/xhci-dbg.c
@@ -438,13 +438,13 @@ char *xhci_get_slot_state(struct xhci_hcd *xhci,
         struct xhci_slot_ctx *slot_ctx = xhci_get_slot_ctx(xhci, ctx);
 
         switch (GET_SLOT_STATE(le32_to_cpu(slot_ctx->dev_state))) {
-        case 0:
+        case SLOT_STATE_ENABLED:
                 return "enabled/disabled";
-        case 1:
+        case SLOT_STATE_DEFAULT:
                 return "default";
-        case 2:
+        case SLOT_STATE_ADDRESSED:
                 return "addressed";
-        case 3:
+        case SLOT_STATE_CONFIGURED:
                 return "configured";
         default:
                 return "reserved";
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 596d8fbb9e18..1370db808fc6 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -985,9 +985,19 @@ static unsigned int xhci_parse_exponent_interval(struct usb_device *udev,
         interval = clamp_val(ep->desc.bInterval, 1, 16) - 1;
         if (interval != ep->desc.bInterval - 1)
                 dev_warn(&udev->dev,
-                         "ep %#x - rounding interval to %d microframes\n",
+                         "ep %#x - rounding interval to %d %sframes\n",
                          ep->desc.bEndpointAddress,
-                         1 << interval);
+                         1 << interval,
+                         udev->speed == USB_SPEED_FULL ? "" : "micro");
+
+        if (udev->speed == USB_SPEED_FULL) {
+                /*
+                 * Full speed isoc endpoints specify interval in frames,
+                 * not microframes. We are using microframes everywhere,
+                 * so adjust accordingly.
+                 */
+                interval += 3;  /* 1 frame = 2^3 uframes */
+        }
 
         return interval;
 }
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index c408e9f6a707..17541d09eabb 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -106,12 +106,22 @@ static int xhci_pci_setup(struct usb_hcd *hcd)
 
         /* Look for vendor-specific quirks */
         if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC &&
-                        pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK &&
-                        pdev->revision == 0x0) {
+                        pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK) {
+                if (pdev->revision == 0x0) {
                         xhci->quirks |= XHCI_RESET_EP_QUIRK;
                         xhci_dbg(xhci, "QUIRK: Fresco Logic xHC needs configure"
                                         " endpoint cmd after reset endpoint\n");
+                }
+                /* Fresco Logic confirms: all revisions of this chip do not
+                 * support MSI, even though some of them claim to in their PCI
+                 * capabilities.
+                 */
+                xhci->quirks |= XHCI_BROKEN_MSI;
+                xhci_dbg(xhci, "QUIRK: Fresco Logic revision %u "
+                                "has broken MSI implementation\n",
+                                pdev->revision);
         }
+
         if (pdev->vendor == PCI_VENDOR_ID_NEC)
                 xhci->quirks |= XHCI_NEC_HOST;
 
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 4b40e4c95f94..e5530181baa3 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1778,7 +1778,7 @@ static int skip_isoc_td(struct xhci_hcd *xhci, struct xhci_td *td,
         struct usb_iso_packet_descriptor *frame;
         int idx;
 
-        ep_ring = xhci_dma_to_transfer_ring(ep, event->buffer);
+        ep_ring = xhci_dma_to_transfer_ring(ep, le64_to_cpu(event->buffer));
         urb_priv = td->urb->hcpriv;
         idx = urb_priv->td_cnt;
         frame = &td->urb->iso_frame_desc[idx];
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 743cf80debb1..d0a65401670b 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -430,12 +430,19 @@ int xhci_run(struct usb_hcd *hcd)
                 free_irq(hcd->irq, hcd);
         hcd->irq = -1;
 
+        /* Some Fresco Logic host controllers advertise MSI, but fail to
+         * generate interrupts.  Don't even try to enable MSI.
+         */
+        if (xhci->quirks & XHCI_BROKEN_MSI)
+                goto legacy_irq;
+
         ret = xhci_setup_msix(xhci);
         if (ret)
                 /* fall back to msi*/
                 ret = xhci_setup_msi(xhci);
 
         if (ret) {
+legacy_irq:
                 /* fall back to legacy interrupt*/
                 ret = request_irq(pdev->irq, &usb_hcd_irq, IRQF_SHARED,
                                         hcd->irq_descr, hcd);
@@ -1848,8 +1855,8 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
 
         /* Free any rings that were dropped, but not changed. */
         for (i = 1; i < 31; ++i) {
-                if ((ctrl_ctx->drop_flags & (1 << (i + 1))) &&
-                                !(ctrl_ctx->add_flags & (1 << (i + 1))))
+                if ((le32_to_cpu(ctrl_ctx->drop_flags) & (1 << (i + 1))) &&
+                    !(le32_to_cpu(ctrl_ctx->add_flags) & (1 << (i + 1))))
                         xhci_free_or_cache_endpoint_ring(xhci, virt_dev, i);
         }
         xhci_zero_in_ctx(xhci, virt_dev);
@@ -2466,6 +2473,7 @@ int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev)
         struct xhci_command *reset_device_cmd;
         int timeleft;
         int last_freed_endpoint;
+        struct xhci_slot_ctx *slot_ctx;
 
         ret = xhci_check_args(hcd, udev, NULL, 0, false, __func__);
         if (ret <= 0)
@@ -2498,6 +2506,12 @@ int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev)
                         return -EINVAL;
         }
 
+        /* If device is not setup, there is no point in resetting it */
+        slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->out_ctx);
+        if (GET_SLOT_STATE(le32_to_cpu(slot_ctx->dev_state)) ==
+                                                SLOT_STATE_DISABLED)
+                return 0;
+
         xhci_dbg(xhci, "Resetting device with slot ID %u\n", slot_id);
         /* Allocate the command structure that holds the struct completion.
          * Assume we're in process context, since the normal device reset
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index f9098a24d38b..a2cc76741695 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -560,6 +560,11 @@ struct xhci_slot_ctx {
 #define SLOT_STATE      (0x1f << 27)
 #define GET_SLOT_STATE(p)       (((p) & (0x1f << 27)) >> 27)
 
+#define SLOT_STATE_DISABLED     0
+#define SLOT_STATE_ENABLED      SLOT_STATE_DISABLED
+#define SLOT_STATE_DEFAULT      1
+#define SLOT_STATE_ADDRESSED    2
+#define SLOT_STATE_CONFIGURED   3
 
 /**
  * struct xhci_ep_ctx
@@ -1309,6 +1314,7 @@ struct xhci_hcd {
  * commands.
  */
 #define XHCI_EP_LIMIT_QUIRK     (1 << 5)
+#define XHCI_BROKEN_MSI         (1 << 6)
         unsigned int            num_active_eps;
         unsigned int            limit_active_eps;
         /* There are two roothubs to keep track of bus suspend info for */