1 files changed, 71 insertions, 22 deletions

diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c
index fb73dc100535..6a4b93ad1082 100644
--- a/drivers/usb/gadget/net2280.c
+++ b/drivers/usb/gadget/net2280.c
@@ -26,6 +26,8 @@
  * Copyright (C) 2003 David Brownell
  * Copyright (C) 2003-2005 PLX Technology, Inc.
  *
+ * Modified Seth Levy 2005 PLX Technology, Inc. to provide compatibility with 2282 chip
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
@@ -71,8 +73,8 @@
 #include <asm/unaligned.h>
 
 
-#define DRIVER_DESC             "PLX NET2280 USB Peripheral Controller"
-#define DRIVER_VERSION          "2005 Feb 03"
+#define DRIVER_DESC             "PLX NET228x USB Peripheral Controller"
+#define DRIVER_VERSION          "2005 Sept 27"
 
 #define DMA_ADDR_INVALID        (~(dma_addr_t)0)
 #define EP_DONTUSE              13      /* nonzero */
@@ -118,7 +120,7 @@ module_param (fifo_mode, ushort, 0644);
 /* enable_suspend -- When enabled, the driver will respond to
  * USB suspend requests by powering down the NET2280.  Otherwise,
  * USB suspend requests will be ignored.  This is acceptible for
- * self-powered devices, and helps avoid some quirks.
+ * self-powered devices
  */
 static int enable_suspend = 0;
 
@@ -223,6 +225,11 @@ net2280_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
         ep->is_in = (tmp & USB_DIR_IN) != 0;
         if (!ep->is_in)
                 writel ((1 << SET_NAK_OUT_PACKETS), &ep->regs->ep_rsp);
+        else if (dev->pdev->device != 0x2280) {
+                /* Added for 2282, Don't use nak packets on an in endpoint, this was ignored on 2280 */
+                writel ((1 << CLEAR_NAK_OUT_PACKETS)
+                        | (1 << CLEAR_NAK_OUT_PACKETS_MODE), &ep->regs->ep_rsp);
+        }
 
         writel (tmp, &ep->regs->ep_cfg);
 
@@ -232,8 +239,9 @@ net2280_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
                 writel (tmp, &dev->regs->pciirqenb0);
 
                 tmp = (1 << DATA_PACKET_RECEIVED_INTERRUPT_ENABLE)
-                        | (1 << DATA_PACKET_TRANSMITTED_INTERRUPT_ENABLE)
-                        | readl (&ep->regs->ep_irqenb);
+                        | (1 << DATA_PACKET_TRANSMITTED_INTERRUPT_ENABLE);
+                if (dev->pdev->device == 0x2280)
+                        tmp |= readl (&ep->regs->ep_irqenb);
                 writel (tmp, &ep->regs->ep_irqenb);
         } else {                                /* dma, per-request */
                 tmp = (1 << (8 + ep->num));     /* completion */
@@ -314,10 +322,18 @@ static void ep_reset (struct net2280_regs __iomem *regs, struct net2280_ep *ep)
         /* init to our chosen defaults, notably so that we NAK OUT
          * packets until the driver queues a read (+note erratum 0112)
          */
-        tmp = (1 << SET_NAK_OUT_PACKETS_MODE)
+        if (!ep->is_in || ep->dev->pdev->device == 0x2280) {
+                tmp = (1 << SET_NAK_OUT_PACKETS_MODE)
                 | (1 << SET_NAK_OUT_PACKETS)
                 | (1 << CLEAR_EP_HIDE_STATUS_PHASE)
                 | (1 << CLEAR_INTERRUPT_MODE);
+        } else {
+                /* added for 2282 */
+                tmp = (1 << CLEAR_NAK_OUT_PACKETS_MODE)
+                | (1 << CLEAR_NAK_OUT_PACKETS)
+                | (1 << CLEAR_EP_HIDE_STATUS_PHASE)
+                | (1 << CLEAR_INTERRUPT_MODE);
+        }
 
         if (ep->num != 0) {
                 tmp |= (1 << CLEAR_ENDPOINT_TOGGLE)
@@ -326,14 +342,18 @@ static void ep_reset (struct net2280_regs __iomem *regs, struct net2280_ep *ep)
         writel (tmp, &ep->regs->ep_rsp);
 
         /* scrub most status bits, and flush any fifo state */
-        writel (  (1 << TIMEOUT)
+        if (ep->dev->pdev->device == 0x2280)
+                tmp = (1 << FIFO_OVERFLOW)
+                        | (1 << FIFO_UNDERFLOW);
+        else
+                tmp = 0;
+
+        writel (tmp | (1 << TIMEOUT)
                 | (1 << USB_STALL_SENT)
                 | (1 << USB_IN_NAK_SENT)
                 | (1 << USB_IN_ACK_RCVD)
                 | (1 << USB_OUT_PING_NAK_SENT)
                 | (1 << USB_OUT_ACK_SENT)
-                | (1 << FIFO_OVERFLOW)
-                | (1 << FIFO_UNDERFLOW)
                 | (1 << FIFO_FLUSH)
                 | (1 << SHORT_PACKET_OUT_DONE_INTERRUPT)
                 | (1 << SHORT_PACKET_TRANSFERRED_INTERRUPT)
@@ -718,7 +738,7 @@ fill_dma_desc (struct net2280_ep *ep, struct net2280_request *req, int valid)
          */
         if (ep->is_in)
                 dmacount |= (1 << DMA_DIRECTION);
-        else if ((dmacount % ep->ep.maxpacket) != 0)
+        if ((!ep->is_in && (dmacount % ep->ep.maxpacket) != 0) || ep->dev->pdev->device != 0x2280)
                 dmacount |= (1 << END_OF_CHAIN);
 
         req->valid = valid;
@@ -760,9 +780,12 @@ static inline void stop_dma (struct net2280_dma_regs __iomem *dma)
 static void start_queue (struct net2280_ep *ep, u32 dmactl, u32 td_dma)
 {
         struct net2280_dma_regs __iomem *dma = ep->dma;
+        unsigned int tmp = (1 << VALID_BIT) | (ep->is_in << DMA_DIRECTION);
 
-        writel ((1 << VALID_BIT) | (ep->is_in << DMA_DIRECTION),
-                        &dma->dmacount);
+        if (ep->dev->pdev->device != 0x2280)
+                tmp |= (1 << END_OF_CHAIN);
+
+        writel (tmp, &dma->dmacount);
         writel (readl (&dma->dmastat), &dma->dmastat);
 
         writel (td_dma, &dma->dmadesc);
@@ -2110,7 +2133,11 @@ static void handle_ep_small (struct net2280_ep *ep)
         VDEBUG (ep->dev, "%s ack ep_stat %08x, req %p\n",
                         ep->ep.name, t, req ? &req->req : 0);
 #endif
-        writel (t & ~(1 << NAK_OUT_PACKETS), &ep->regs->ep_stat);
+        if (!ep->is_in || ep->dev->pdev->device == 0x2280)
+                writel (t & ~(1 << NAK_OUT_PACKETS), &ep->regs->ep_stat);
+        else
+                /* Added for 2282 */
+                writel (t, &ep->regs->ep_stat);
 
         /* for ep0, monitor token irqs to catch data stage length errors
          * and to synchronize on status.
@@ -2214,7 +2241,8 @@ static void handle_ep_small (struct net2280_ep *ep)
                         if (likely (req)) {
                                 req->td->dmacount = 0;
                                 t = readl (&ep->regs->ep_avail);
-                                dma_done (ep, req, count, t);
+                                dma_done (ep, req, count,
+                                        (ep->out_overflow || t) ? -EOVERFLOW : 0);
                         }
 
                         /* also flush to prevent erratum 0106 trouble */
@@ -2337,7 +2365,7 @@ static void handle_stat0_irqs (struct net2280 *dev, u32 stat)
                         u32                     raw [2];
                         struct usb_ctrlrequest  r;
                 } u;
-                int                             tmp = 0;
+                int                             tmp;
                 struct net2280_request          *req;
 
                 if (dev->gadget.speed == USB_SPEED_UNKNOWN) {
@@ -2364,14 +2392,19 @@ static void handle_stat0_irqs (struct net2280 *dev, u32 stat)
                 }
                 ep->stopped = 0;
                 dev->protocol_stall = 0;
-                writel (  (1 << TIMEOUT)
+
+                if (ep->dev->pdev->device == 0x2280)
+                        tmp = (1 << FIFO_OVERFLOW)
+                                | (1 << FIFO_UNDERFLOW);
+                else
+                        tmp = 0;
+
+                writel (tmp | (1 << TIMEOUT)
                         | (1 << USB_STALL_SENT)
                         | (1 << USB_IN_NAK_SENT)
                         | (1 << USB_IN_ACK_RCVD)
                         | (1 << USB_OUT_PING_NAK_SENT)
                         | (1 << USB_OUT_ACK_SENT)
-                        | (1 << FIFO_OVERFLOW)
-                        | (1 << FIFO_UNDERFLOW)
                         | (1 << SHORT_PACKET_OUT_DONE_INTERRUPT)
                         | (1 << SHORT_PACKET_TRANSFERRED_INTERRUPT)
                         | (1 << DATA_PACKET_RECEIVED_INTERRUPT)
@@ -2385,6 +2418,8 @@ static void handle_stat0_irqs (struct net2280 *dev, u32 stat)
                 cpu_to_le32s (&u.raw [0]);
                 cpu_to_le32s (&u.raw [1]);
 
+                tmp = 0;
+
 #define w_value         le16_to_cpup (&u.r.wValue)
 #define w_index         le16_to_cpup (&u.r.wIndex)
 #define w_length        le16_to_cpup (&u.r.wLength)
@@ -2594,10 +2629,17 @@ static void handle_stat1_irqs (struct net2280 *dev, u32 stat)
                 writel (stat, &dev->regs->irqstat1);
 
         /* some status we can just ignore */
-        stat &= ~((1 << CONTROL_STATUS_INTERRUPT)
-                        | (1 << SUSPEND_REQUEST_INTERRUPT)
-                        | (1 << RESUME_INTERRUPT)
-                        | (1 << SOF_INTERRUPT));
+        if (dev->pdev->device == 0x2280)
+                stat &= ~((1 << CONTROL_STATUS_INTERRUPT)
+                          | (1 << SUSPEND_REQUEST_INTERRUPT)
+                          | (1 << RESUME_INTERRUPT)
+                          | (1 << SOF_INTERRUPT));
+        else
+                stat &= ~((1 << CONTROL_STATUS_INTERRUPT)
+                          | (1 << RESUME_INTERRUPT)
+                          | (1 << SOF_DOWN_INTERRUPT)
+                          | (1 << SOF_INTERRUPT));
+
         if (!stat)
                 return;
         // DEBUG (dev, "irqstat1 %08x\n", stat);
@@ -2939,6 +2981,13 @@ static struct pci_device_id pci_ids [] = { {
         .device =       0x2280,
         .subvendor =    PCI_ANY_ID,
         .subdevice =    PCI_ANY_ID,
+}, {
+        .class =        ((PCI_CLASS_SERIAL_USB << 8) | 0xfe),
+        .class_mask =   ~0,
+        .vendor =       0x17cc,
+        .device =       0x2282,
+        .subvendor =    PCI_ANY_ID,
+        .subdevice =    PCI_ANY_ID,
 
 }, { /* end: all zeroes */ }
 };