1 files changed, 47 insertions, 39 deletions

diff --git a/drivers/tty/synclink.c b/drivers/tty/synclink.c
index 593d40ad0a6b..70e3a525bc82 100644
--- a/drivers/tty/synclink.c
+++ b/drivers/tty/synclink.c
@@ -1359,7 +1359,7 @@ static void mgsl_isr_io_pin( struct mgsl_struct *info )
                         }
                 }
         
-                if ( (info->port.flags & ASYNC_CTS_FLOW) && 
+                if (tty_port_cts_enabled(&info->port) &&
                      (status & MISCSTATUS_CTS_LATCHED) ) {
                         if (info->port.tty->hw_stopped) {
                                 if (status & MISCSTATUS_CTS) {
@@ -1840,22 +1840,22 @@ static void shutdown(struct mgsl_struct * info)
         usc_DisableInterrupts(info,RECEIVE_DATA + RECEIVE_STATUS +
                 TRANSMIT_DATA + TRANSMIT_STATUS + IO_PIN + MISC );
         usc_DisableDmaInterrupts(info,DICR_MASTER + DICR_TRANSMIT + DICR_RECEIVE);
-        
+
         /* Disable DMAEN (Port 7, Bit 14) */
         /* This disconnects the DMA request signal from the ISA bus */
         /* on the ISA adapter. This has no effect for the PCI adapter */
         usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT15) | BIT14));
-        
+
         /* Disable INTEN (Port 6, Bit12) */
         /* This disconnects the IRQ request signal to the ISA bus */
         /* on the ISA adapter. This has no effect for the PCI adapter */
         usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT13) | BIT12));
-        
-        if (!info->port.tty || info->port.tty->termios->c_cflag & HUPCL) {
+
+        if (!info->port.tty || info->port.tty->termios.c_cflag & HUPCL) {
                 info->serial_signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
                 usc_set_serial_signals(info);
         }
-        
+
         spin_unlock_irqrestore(&info->irq_spinlock,flags);
 
         mgsl_release_resources(info);   
@@ -1895,7 +1895,7 @@ static void mgsl_program_hw(struct mgsl_struct *info)
         usc_EnableInterrupts(info, IO_PIN);
         usc_get_serial_signals(info);
                 
-        if (info->netcount || info->port.tty->termios->c_cflag & CREAD)
+        if (info->netcount || info->port.tty->termios.c_cflag & CREAD)
                 usc_start_receiver(info);
                 
         spin_unlock_irqrestore(&info->irq_spinlock,flags);
@@ -1908,14 +1908,14 @@ static void mgsl_change_params(struct mgsl_struct *info)
         unsigned cflag;
         int bits_per_char;
 
-        if (!info->port.tty || !info->port.tty->termios)
+        if (!info->port.tty)
                 return;
                 
         if (debug_level >= DEBUG_LEVEL_INFO)
                 printk("%s(%d):mgsl_change_params(%s)\n",
                          __FILE__,__LINE__, info->device_name );
                          
-        cflag = info->port.tty->termios->c_cflag;
+        cflag = info->port.tty->termios.c_cflag;
 
         /* if B0 rate (hangup) specified then negate DTR and RTS */
         /* otherwise assert DTR and RTS */
@@ -2367,8 +2367,8 @@ static void mgsl_throttle(struct tty_struct * tty)
         
         if (I_IXOFF(tty))
                 mgsl_send_xchar(tty, STOP_CHAR(tty));
- 
-        if (tty->termios->c_cflag & CRTSCTS) {
+
+        if (tty->termios.c_cflag & CRTSCTS) {
                 spin_lock_irqsave(&info->irq_spinlock,flags);
                 info->serial_signals &= ~SerialSignal_RTS;
                 usc_set_serial_signals(info);
@@ -2401,8 +2401,8 @@ static void mgsl_unthrottle(struct tty_struct * tty)
                 else
                         mgsl_send_xchar(tty, START_CHAR(tty));
         }
-        
-        if (tty->termios->c_cflag & CRTSCTS) {
+
+        if (tty->termios.c_cflag & CRTSCTS) {
                 spin_lock_irqsave(&info->irq_spinlock,flags);
                 info->serial_signals |= SerialSignal_RTS;
                 usc_set_serial_signals(info);
@@ -3045,7 +3045,7 @@ static void mgsl_set_termios(struct tty_struct *tty, struct ktermios *old_termio
 
         /* Handle transition to B0 status */
         if (old_termios->c_cflag & CBAUD &&
-            !(tty->termios->c_cflag & CBAUD)) {
+            !(tty->termios.c_cflag & CBAUD)) {
                 info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
                 spin_lock_irqsave(&info->irq_spinlock,flags);
                 usc_set_serial_signals(info);
@@ -3054,9 +3054,9 @@ static void mgsl_set_termios(struct tty_struct *tty, struct ktermios *old_termio
         
         /* Handle transition away from B0 status */
         if (!(old_termios->c_cflag & CBAUD) &&
-            tty->termios->c_cflag & CBAUD) {
+            tty->termios.c_cflag & CBAUD) {
                 info->serial_signals |= SerialSignal_DTR;
-                if (!(tty->termios->c_cflag & CRTSCTS) || 
+                if (!(tty->termios.c_cflag & CRTSCTS) || 
                     !test_bit(TTY_THROTTLED, &tty->flags)) {
                         info->serial_signals |= SerialSignal_RTS;
                 }
@@ -3067,7 +3067,7 @@ static void mgsl_set_termios(struct tty_struct *tty, struct ktermios *old_termio
         
         /* Handle turning off CRTSCTS */
         if (old_termios->c_cflag & CRTSCTS &&
-            !(tty->termios->c_cflag & CRTSCTS)) {
+            !(tty->termios.c_cflag & CRTSCTS)) {
                 tty->hw_stopped = 0;
                 mgsl_start(tty);
         }
@@ -3287,7 +3287,7 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
                 return 0;
         }
 
-        if (tty->termios->c_cflag & CLOCAL)
+        if (tty->termios.c_cflag & CLOCAL)
                 do_clocal = true;
 
         /* Wait for carrier detect and the line to become
@@ -3313,7 +3313,7 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
         port->blocked_open++;
         
         while (1) {
-                if (tty->termios->c_cflag & CBAUD)
+                if (tty->termios.c_cflag & CBAUD)
                         tty_port_raise_dtr_rts(port);
                 
                 set_current_state(TASK_INTERRUPTIBLE);
@@ -3338,9 +3338,9 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
                         printk("%s(%d):block_til_ready blocking on %s count=%d\n",
                                  __FILE__,__LINE__, tty->driver->name, port->count );
                                  
-                tty_unlock();
+                tty_unlock(tty);
                 schedule();
-                tty_lock();
+                tty_lock(tty);
         }
         
         set_current_state(TASK_RUNNING);
@@ -3362,6 +3362,29 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
         
 }       /* end of block_til_ready() */
 
+static int mgsl_install(struct tty_driver *driver, struct tty_struct *tty)
+{
+        struct mgsl_struct *info;
+        int line = tty->index;
+
+        /* verify range of specified line number */
+        if (line >= mgsl_device_count) {
+                printk("%s(%d):mgsl_open with invalid line #%d.\n",
+                        __FILE__, __LINE__, line);
+                return -ENODEV;
+        }
+
+        /* find the info structure for the specified line */
+        info = mgsl_device_list;
+        while (info && info->line != line)
+                info = info->next_device;
+        if (mgsl_paranoia_check(info, tty->name, "mgsl_open"))
+                return -ENODEV;
+        tty->driver_data = info;
+
+        return tty_port_install(&info->port, driver, tty);
+}
+
 /* mgsl_open()
  *
  *      Called when a port is opened.  Init and enable port.
@@ -3374,26 +3397,10 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
  */
 static int mgsl_open(struct tty_struct *tty, struct file * filp)
 {
-        struct mgsl_struct      *info;
-        int                     retval, line;
+        struct mgsl_struct *info = tty->driver_data;
         unsigned long flags;
+        int retval;
 
-        /* verify range of specified line number */     
-        line = tty->index;
-        if (line >= mgsl_device_count) {
-                printk("%s(%d):mgsl_open with invalid line #%d.\n",
-                        __FILE__,__LINE__,line);
-                return -ENODEV;
-        }
-
-        /* find the info structure for the specified line */
-        info = mgsl_device_list;
-        while(info && info->line != line)
-                info = info->next_device;
-        if (mgsl_paranoia_check(info, tty->name, "mgsl_open"))
-                return -ENODEV;
-        
-        tty->driver_data = info;
         info->port.tty = tty;
                 
         if (debug_level >= DEBUG_LEVEL_INFO)
@@ -4297,6 +4304,7 @@ static struct mgsl_struct* mgsl_allocate_device(void)
 }       /* end of mgsl_allocate_device()*/
 
 static const struct tty_operations mgsl_ops = {
+        .install = mgsl_install,
         .open = mgsl_open,
         .close = mgsl_close,
         .write = mgsl_write,