aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/tty/serial/sunzilog.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty/serial/sunzilog.h')
-rw-r--r--drivers/tty/serial/sunzilog.h289
1 files changed, 289 insertions, 0 deletions
diff --git a/drivers/tty/serial/sunzilog.h b/drivers/tty/serial/sunzilog.h
new file mode 100644
index 000000000000..5dec7b47cc38
--- /dev/null
+++ b/drivers/tty/serial/sunzilog.h
@@ -0,0 +1,289 @@
1#ifndef _SUNZILOG_H
2#define _SUNZILOG_H
3
4struct zilog_channel {
5 volatile unsigned char control;
6 volatile unsigned char __pad1;
7 volatile unsigned char data;
8 volatile unsigned char __pad2;
9};
10
11struct zilog_layout {
12 struct zilog_channel channelB;
13 struct zilog_channel channelA;
14};
15
16#define NUM_ZSREGS 17
17#define R7p 16 /* Written as R7 with P15 bit 0 set */
18
19/* Conversion routines to/from brg time constants from/to bits
20 * per second.
21 */
22#define BRG_TO_BPS(brg, freq) ((freq) / 2 / ((brg) + 2))
23#define BPS_TO_BRG(bps, freq) ((((freq) + (bps)) / (2 * (bps))) - 2)
24
25/* The Zilog register set */
26
27#define FLAG 0x7e
28
29/* Write Register 0 */
30#define R0 0 /* Register selects */
31#define R1 1
32#define R2 2
33#define R3 3
34#define R4 4
35#define R5 5
36#define R6 6
37#define R7 7
38#define R8 8
39#define R9 9
40#define R10 10
41#define R11 11
42#define R12 12
43#define R13 13
44#define R14 14
45#define R15 15
46
47#define NULLCODE 0 /* Null Code */
48#define POINT_HIGH 0x8 /* Select upper half of registers */
49#define RES_EXT_INT 0x10 /* Reset Ext. Status Interrupts */
50#define SEND_ABORT 0x18 /* HDLC Abort */
51#define RES_RxINT_FC 0x20 /* Reset RxINT on First Character */
52#define RES_Tx_P 0x28 /* Reset TxINT Pending */
53#define ERR_RES 0x30 /* Error Reset */
54#define RES_H_IUS 0x38 /* Reset highest IUS */
55
56#define RES_Rx_CRC 0x40 /* Reset Rx CRC Checker */
57#define RES_Tx_CRC 0x80 /* Reset Tx CRC Checker */
58#define RES_EOM_L 0xC0 /* Reset EOM latch */
59
60/* Write Register 1 */
61
62#define EXT_INT_ENAB 0x1 /* Ext Int Enable */
63#define TxINT_ENAB 0x2 /* Tx Int Enable */
64#define PAR_SPEC 0x4 /* Parity is special condition */
65
66#define RxINT_DISAB 0 /* Rx Int Disable */
67#define RxINT_FCERR 0x8 /* Rx Int on First Character Only or Error */
68#define INT_ALL_Rx 0x10 /* Int on all Rx Characters or error */
69#define INT_ERR_Rx 0x18 /* Int on error only */
70#define RxINT_MASK 0x18
71
72#define WT_RDY_RT 0x20 /* Wait/Ready on R/T */
73#define WT_FN_RDYFN 0x40 /* Wait/FN/Ready FN */
74#define WT_RDY_ENAB 0x80 /* Wait/Ready Enable */
75
76/* Write Register #2 (Interrupt Vector) */
77
78/* Write Register 3 */
79
80#define RxENAB 0x1 /* Rx Enable */
81#define SYNC_L_INH 0x2 /* Sync Character Load Inhibit */
82#define ADD_SM 0x4 /* Address Search Mode (SDLC) */
83#define RxCRC_ENAB 0x8 /* Rx CRC Enable */
84#define ENT_HM 0x10 /* Enter Hunt Mode */
85#define AUTO_ENAB 0x20 /* Auto Enables */
86#define Rx5 0x0 /* Rx 5 Bits/Character */
87#define Rx7 0x40 /* Rx 7 Bits/Character */
88#define Rx6 0x80 /* Rx 6 Bits/Character */
89#define Rx8 0xc0 /* Rx 8 Bits/Character */
90#define RxN_MASK 0xc0
91
92/* Write Register 4 */
93
94#define PAR_ENAB 0x1 /* Parity Enable */
95#define PAR_EVEN 0x2 /* Parity Even/Odd* */
96
97#define SYNC_ENAB 0 /* Sync Modes Enable */
98#define SB1 0x4 /* 1 stop bit/char */
99#define SB15 0x8 /* 1.5 stop bits/char */
100#define SB2 0xc /* 2 stop bits/char */
101
102#define MONSYNC 0 /* 8 Bit Sync character */
103#define BISYNC 0x10 /* 16 bit sync character */
104#define SDLC 0x20 /* SDLC Mode (01111110 Sync Flag) */
105#define EXTSYNC 0x30 /* External Sync Mode */
106
107#define X1CLK 0x0 /* x1 clock mode */
108#define X16CLK 0x40 /* x16 clock mode */
109#define X32CLK 0x80 /* x32 clock mode */
110#define X64CLK 0xC0 /* x64 clock mode */
111#define XCLK_MASK 0xC0
112
113/* Write Register 5 */
114
115#define TxCRC_ENAB 0x1 /* Tx CRC Enable */
116#define RTS 0x2 /* RTS */
117#define SDLC_CRC 0x4 /* SDLC/CRC-16 */
118#define TxENAB 0x8 /* Tx Enable */
119#define SND_BRK 0x10 /* Send Break */
120#define Tx5 0x0 /* Tx 5 bits (or less)/character */
121#define Tx7 0x20 /* Tx 7 bits/character */
122#define Tx6 0x40 /* Tx 6 bits/character */
123#define Tx8 0x60 /* Tx 8 bits/character */
124#define TxN_MASK 0x60
125#define DTR 0x80 /* DTR */
126
127/* Write Register 6 (Sync bits 0-7/SDLC Address Field) */
128
129/* Write Register 7 (Sync bits 8-15/SDLC 01111110) */
130
131/* Write Register 7' (ESCC Only) */
132#define AUTO_TxFLAG 1 /* Automatic Tx SDLC Flag */
133#define AUTO_EOM_RST 2 /* Automatic EOM Reset */
134#define AUTOnRTS 4 /* Automatic /RTS pin deactivation */
135#define RxFIFO_LVL 8 /* Receive FIFO interrupt level */
136#define nDTRnREQ 0x10 /* /DTR/REQ timing */
137#define TxFIFO_LVL 0x20 /* Transmit FIFO interrupt level */
138#define EXT_RD_EN 0x40 /* Extended read register enable */
139
140/* Write Register 8 (transmit buffer) */
141
142/* Write Register 9 (Master interrupt control) */
143#define VIS 1 /* Vector Includes Status */
144#define NV 2 /* No Vector */
145#define DLC 4 /* Disable Lower Chain */
146#define MIE 8 /* Master Interrupt Enable */
147#define STATHI 0x10 /* Status high */
148#define SWIACK 0x20 /* Software Interrupt Ack (not on NMOS) */
149#define NORESET 0 /* No reset on write to R9 */
150#define CHRB 0x40 /* Reset channel B */
151#define CHRA 0x80 /* Reset channel A */
152#define FHWRES 0xc0 /* Force hardware reset */
153
154/* Write Register 10 (misc control bits) */
155#define BIT6 1 /* 6 bit/8bit sync */
156#define LOOPMODE 2 /* SDLC Loop mode */
157#define ABUNDER 4 /* Abort/flag on SDLC xmit underrun */
158#define MARKIDLE 8 /* Mark/flag on idle */
159#define GAOP 0x10 /* Go active on poll */
160#define NRZ 0 /* NRZ mode */
161#define NRZI 0x20 /* NRZI mode */
162#define FM1 0x40 /* FM1 (transition = 1) */
163#define FM0 0x60 /* FM0 (transition = 0) */
164#define CRCPS 0x80 /* CRC Preset I/O */
165
166/* Write Register 11 (Clock Mode control) */
167#define TRxCXT 0 /* TRxC = Xtal output */
168#define TRxCTC 1 /* TRxC = Transmit clock */
169#define TRxCBR 2 /* TRxC = BR Generator Output */
170#define TRxCDP 3 /* TRxC = DPLL output */
171#define TRxCOI 4 /* TRxC O/I */
172#define TCRTxCP 0 /* Transmit clock = RTxC pin */
173#define TCTRxCP 8 /* Transmit clock = TRxC pin */
174#define TCBR 0x10 /* Transmit clock = BR Generator output */
175#define TCDPLL 0x18 /* Transmit clock = DPLL output */
176#define RCRTxCP 0 /* Receive clock = RTxC pin */
177#define RCTRxCP 0x20 /* Receive clock = TRxC pin */
178#define RCBR 0x40 /* Receive clock = BR Generator output */
179#define RCDPLL 0x60 /* Receive clock = DPLL output */
180#define RTxCX 0x80 /* RTxC Xtal/No Xtal */
181
182/* Write Register 12 (lower byte of baud rate generator time constant) */
183
184/* Write Register 13 (upper byte of baud rate generator time constant) */
185
186/* Write Register 14 (Misc control bits) */
187#define BRENAB 1 /* Baud rate generator enable */
188#define BRSRC 2 /* Baud rate generator source */
189#define DTRREQ 4 /* DTR/Request function */
190#define AUTOECHO 8 /* Auto Echo */
191#define LOOPBAK 0x10 /* Local loopback */
192#define SEARCH 0x20 /* Enter search mode */
193#define RMC 0x40 /* Reset missing clock */
194#define DISDPLL 0x60 /* Disable DPLL */
195#define SSBR 0x80 /* Set DPLL source = BR generator */
196#define SSRTxC 0xa0 /* Set DPLL source = RTxC */
197#define SFMM 0xc0 /* Set FM mode */
198#define SNRZI 0xe0 /* Set NRZI mode */
199
200/* Write Register 15 (external/status interrupt control) */
201#define WR7pEN 1 /* WR7' Enable (ESCC only) */
202#define ZCIE 2 /* Zero count IE */
203#define FIFOEN 4 /* FIFO Enable (ESCC only) */
204#define DCDIE 8 /* DCD IE */
205#define SYNCIE 0x10 /* Sync/hunt IE */
206#define CTSIE 0x20 /* CTS IE */
207#define TxUIE 0x40 /* Tx Underrun/EOM IE */
208#define BRKIE 0x80 /* Break/Abort IE */
209
210
211/* Read Register 0 */
212#define Rx_CH_AV 0x1 /* Rx Character Available */
213#define ZCOUNT 0x2 /* Zero count */
214#define Tx_BUF_EMP 0x4 /* Tx Buffer empty */
215#define DCD 0x8 /* DCD */
216#define SYNC 0x10 /* Sync/hunt */
217#define CTS 0x20 /* CTS */
218#define TxEOM 0x40 /* Tx underrun */
219#define BRK_ABRT 0x80 /* Break/Abort */
220
221/* Read Register 1 */
222#define ALL_SNT 0x1 /* All sent */
223/* Residue Data for 8 Rx bits/char programmed */
224#define RES3 0x8 /* 0/3 */
225#define RES4 0x4 /* 0/4 */
226#define RES5 0xc /* 0/5 */
227#define RES6 0x2 /* 0/6 */
228#define RES7 0xa /* 0/7 */
229#define RES8 0x6 /* 0/8 */
230#define RES18 0xe /* 1/8 */
231#define RES28 0x0 /* 2/8 */
232/* Special Rx Condition Interrupts */
233#define PAR_ERR 0x10 /* Parity error */
234#define Rx_OVR 0x20 /* Rx Overrun Error */
235#define CRC_ERR 0x40 /* CRC/Framing Error */
236#define END_FR 0x80 /* End of Frame (SDLC) */
237
238/* Read Register 2 (channel b only) - Interrupt vector */
239#define CHB_Tx_EMPTY 0x00
240#define CHB_EXT_STAT 0x02
241#define CHB_Rx_AVAIL 0x04
242#define CHB_SPECIAL 0x06
243#define CHA_Tx_EMPTY 0x08
244#define CHA_EXT_STAT 0x0a
245#define CHA_Rx_AVAIL 0x0c
246#define CHA_SPECIAL 0x0e
247#define STATUS_MASK 0x0e
248
249/* Read Register 3 (interrupt pending register) ch a only */
250#define CHBEXT 0x1 /* Channel B Ext/Stat IP */
251#define CHBTxIP 0x2 /* Channel B Tx IP */
252#define CHBRxIP 0x4 /* Channel B Rx IP */
253#define CHAEXT 0x8 /* Channel A Ext/Stat IP */
254#define CHATxIP 0x10 /* Channel A Tx IP */
255#define CHARxIP 0x20 /* Channel A Rx IP */
256
257/* Read Register 6 (LSB frame byte count [Not on NMOS]) */
258
259/* Read Register 7 (MSB frame byte count and FIFO status [Not on NMOS]) */
260
261/* Read Register 8 (receive data register) */
262
263/* Read Register 10 (misc status bits) */
264#define ONLOOP 2 /* On loop */
265#define LOOPSEND 0x10 /* Loop sending */
266#define CLK2MIS 0x40 /* Two clocks missing */
267#define CLK1MIS 0x80 /* One clock missing */
268
269/* Read Register 12 (lower byte of baud rate generator constant) */
270
271/* Read Register 13 (upper byte of baud rate generator constant) */
272
273/* Read Register 15 (value of WR 15) */
274
275/* Misc macros */
276#define ZS_CLEARERR(channel) do { sbus_writeb(ERR_RES, &channel->control); \
277 udelay(5); } while(0)
278
279#define ZS_CLEARSTAT(channel) do { sbus_writeb(RES_EXT_INT, &channel->control); \
280 udelay(5); } while(0)
281
282#define ZS_CLEARFIFO(channel) do { sbus_readb(&channel->data); \
283 udelay(2); \
284 sbus_readb(&channel->data); \
285 udelay(2); \
286 sbus_readb(&channel->data); \
287 udelay(2); } while(0)
288
289#endif /* _SUNZILOG_H */