1 files changed, 118 insertions, 0 deletions

diff --git a/drivers/tty/serial/s3c24a0.c b/drivers/tty/serial/s3c24a0.c
new file mode 100644
index 000000000000..fad6083ca427
--- /dev/null
+++ b/drivers/tty/serial/s3c24a0.c
@@ -0,0 +1,118 @@
+/* linux/drivers/serial/s3c24a0.c
+ *
+ * Driver for Samsung S3C24A0 SoC onboard UARTs.
+ *
+ * Based on drivers/serial/s3c2410.c
+ *
+ * Author: Sandeep Patil <sandeep.patil@azingo.com>
+ *
+ * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+
+#include <mach/hardware.h>
+
+#include <plat/regs-serial.h>
+#include <mach/regs-gpio.h>
+
+#include "samsung.h"
+
+static int s3c24a0_serial_setsource(struct uart_port *port,
+                                    struct s3c24xx_uart_clksrc *clk)
+{
+        unsigned long ucon = rd_regl(port, S3C2410_UCON);
+
+        if (strcmp(clk->name, "uclk") == 0)
+                ucon |= S3C2410_UCON_UCLK;
+        else
+                ucon &= ~S3C2410_UCON_UCLK;
+
+        wr_regl(port, S3C2410_UCON, ucon);
+        return 0;
+}
+
+static int s3c24a0_serial_getsource(struct uart_port *port,
+                                    struct s3c24xx_uart_clksrc *clk)
+{
+        unsigned long ucon = rd_regl(port, S3C2410_UCON);
+
+        clk->divisor = 1;
+        clk->name = (ucon & S3C2410_UCON_UCLK) ? "uclk" : "pclk";
+
+        return 0;
+}
+
+static int s3c24a0_serial_resetport(struct uart_port *port,
+                                    struct s3c2410_uartcfg *cfg)
+{
+        dbg("s3c24a0_serial_resetport: port=%p (%08lx), cfg=%p\n",
+            port, port->mapbase, cfg);
+
+        wr_regl(port, S3C2410_UCON,  cfg->ucon);
+        wr_regl(port, S3C2410_ULCON, cfg->ulcon);
+
+        /* reset both fifos */
+
+        wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
+        wr_regl(port, S3C2410_UFCON, cfg->ufcon);
+
+        return 0;
+}
+
+static struct s3c24xx_uart_info s3c24a0_uart_inf = {
+        .name           = "Samsung S3C24A0 UART",
+        .type           = PORT_S3C2410,
+        .fifosize       = 16,
+        .rx_fifomask    = S3C24A0_UFSTAT_RXMASK,
+        .rx_fifoshift   = S3C24A0_UFSTAT_RXSHIFT,
+        .rx_fifofull    = S3C24A0_UFSTAT_RXFULL,
+        .tx_fifofull    = S3C24A0_UFSTAT_TXFULL,
+        .tx_fifomask    = S3C24A0_UFSTAT_TXMASK,
+        .tx_fifoshift   = S3C24A0_UFSTAT_TXSHIFT,
+        .get_clksrc     = s3c24a0_serial_getsource,
+        .set_clksrc     = s3c24a0_serial_setsource,
+        .reset_port     = s3c24a0_serial_resetport,
+};
+
+static int s3c24a0_serial_probe(struct platform_device *dev)
+{
+        return s3c24xx_serial_probe(dev, &s3c24a0_uart_inf);
+}
+
+static struct platform_driver s3c24a0_serial_driver = {
+        .probe          = s3c24a0_serial_probe,
+        .remove         = __devexit_p(s3c24xx_serial_remove),
+        .driver         = {
+                .name   = "s3c24a0-uart",
+                .owner  = THIS_MODULE,
+        },
+};
+
+s3c24xx_console_init(&s3c24a0_serial_driver, &s3c24a0_uart_inf);
+
+static int __init s3c24a0_serial_init(void)
+{
+        return s3c24xx_serial_init(&s3c24a0_serial_driver, &s3c24a0_uart_inf);
+}
+
+static void __exit s3c24a0_serial_exit(void)
+{
+        platform_driver_unregister(&s3c24a0_serial_driver);
+}
+
+module_init(s3c24a0_serial_init);
+module_exit(s3c24a0_serial_exit);
+