1 files changed, 344 insertions, 0 deletions

diff --git a/drivers/tty/serial/max3107-aava.c b/drivers/tty/serial/max3107-aava.c
new file mode 100644
index 000000000000..a1fe304f2f52
--- /dev/null
+++ b/drivers/tty/serial/max3107-aava.c
@@ -0,0 +1,344 @@
+/*
+ *  max3107.c - spi uart protocol driver for Maxim 3107
+ *  Based on max3100.c
+ *      by Christian Pellegrin <chripell@evolware.org>
+ *  and max3110.c
+ *      by Feng Tang <feng.tang@intel.com>
+ *
+ *  Copyright (C) Aavamobile 2009
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+#include <linux/spi/spi.h>
+#include <linux/freezer.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/sfi.h>
+#include <asm/mrst.h>
+#include "max3107.h"
+
+/* GPIO direction to input function */
+static int max3107_gpio_direction_in(struct gpio_chip *chip, unsigned offset)
+{
+        struct max3107_port *s = container_of(chip, struct max3107_port, chip);
+        u16 buf[1];             /* Buffer for SPI transfer */
+
+        if (offset >= MAX3107_GPIO_COUNT) {
+                dev_err(&s->spi->dev, "Invalid GPIO\n");
+                return -EINVAL;
+        }
+
+        /* Read current GPIO configuration register */
+        buf[0] = MAX3107_GPIOCFG_REG;
+        /* Perform SPI transfer */
+        if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 2)) {
+                dev_err(&s->spi->dev, "SPI transfer GPIO read failed\n");
+                return -EIO;
+        }
+        buf[0] &= MAX3107_SPI_RX_DATA_MASK;
+
+        /* Set GPIO to input */
+        buf[0] &= ~(0x0001 << offset);
+
+        /* Write new GPIO configuration register value */
+        buf[0] |= (MAX3107_WRITE_BIT | MAX3107_GPIOCFG_REG);
+        /* Perform SPI transfer */
+        if (max3107_rw(s, (u8 *)buf, NULL, 2)) {
+                dev_err(&s->spi->dev, "SPI transfer GPIO write failed\n");
+                return -EIO;
+        }
+        return 0;
+}
+
+/* GPIO direction to output function */
+static int max3107_gpio_direction_out(struct gpio_chip *chip, unsigned offset,
+                                        int value)
+{
+        struct max3107_port *s = container_of(chip, struct max3107_port, chip);
+        u16 buf[2];     /* Buffer for SPI transfers */
+
+        if (offset >= MAX3107_GPIO_COUNT) {
+                dev_err(&s->spi->dev, "Invalid GPIO\n");
+                return -EINVAL;
+        }
+
+        /* Read current GPIO configuration and data registers */
+        buf[0] = MAX3107_GPIOCFG_REG;
+        buf[1] = MAX3107_GPIODATA_REG;
+        /* Perform SPI transfer */
+        if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 4)) {
+                dev_err(&s->spi->dev, "SPI transfer gpio failed\n");
+                return -EIO;
+        }
+        buf[0] &= MAX3107_SPI_RX_DATA_MASK;
+        buf[1] &= MAX3107_SPI_RX_DATA_MASK;
+
+        /* Set GPIO to output */
+        buf[0] |= (0x0001 << offset);
+        /* Set value */
+        if (value)
+                buf[1] |= (0x0001 << offset);
+        else
+                buf[1] &= ~(0x0001 << offset);
+
+        /* Write new GPIO configuration and data register values */
+        buf[0] |= (MAX3107_WRITE_BIT | MAX3107_GPIOCFG_REG);
+        buf[1] |= (MAX3107_WRITE_BIT | MAX3107_GPIODATA_REG);
+        /* Perform SPI transfer */
+        if (max3107_rw(s, (u8 *)buf, NULL, 4)) {
+                dev_err(&s->spi->dev,
+                        "SPI transfer for GPIO conf data w failed\n");
+                return -EIO;
+        }
+        return 0;
+}
+
+/* GPIO value query function */
+static int max3107_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+        struct max3107_port *s = container_of(chip, struct max3107_port, chip);
+        u16 buf[1];     /* Buffer for SPI transfer */
+
+        if (offset >= MAX3107_GPIO_COUNT) {
+                dev_err(&s->spi->dev, "Invalid GPIO\n");
+                return -EINVAL;
+        }
+
+        /* Read current GPIO data register */
+        buf[0] = MAX3107_GPIODATA_REG;
+        /* Perform SPI transfer */
+        if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 2)) {
+                dev_err(&s->spi->dev, "SPI transfer GPIO data r failed\n");
+                return -EIO;
+        }
+        buf[0] &= MAX3107_SPI_RX_DATA_MASK;
+
+        /* Return value */
+        return buf[0] & (0x0001 << offset);
+}
+
+/* GPIO value set function */
+static void max3107_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+        struct max3107_port *s = container_of(chip, struct max3107_port, chip);
+        u16 buf[2];     /* Buffer for SPI transfers */
+
+        if (offset >= MAX3107_GPIO_COUNT) {
+                dev_err(&s->spi->dev, "Invalid GPIO\n");
+                return;
+        }
+
+        /* Read current GPIO configuration registers*/
+        buf[0] = MAX3107_GPIODATA_REG;
+        buf[1] = MAX3107_GPIOCFG_REG;
+        /* Perform SPI transfer */
+        if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 4)) {
+                dev_err(&s->spi->dev,
+                        "SPI transfer for GPIO data and config read failed\n");
+                return;
+        }
+        buf[0] &= MAX3107_SPI_RX_DATA_MASK;
+        buf[1] &= MAX3107_SPI_RX_DATA_MASK;
+
+        if (!(buf[1] & (0x0001 << offset))) {
+                /* Configured as input, can't set value */
+                dev_warn(&s->spi->dev,
+                                "Trying to set value for input GPIO\n");
+                return;
+        }
+
+        /* Set value */
+        if (value)
+                buf[0] |= (0x0001 << offset);
+        else
+                buf[0] &= ~(0x0001 << offset);
+
+        /* Write new GPIO data register value */
+        buf[0] |= (MAX3107_WRITE_BIT | MAX3107_GPIODATA_REG);
+        /* Perform SPI transfer */
+        if (max3107_rw(s, (u8 *)buf, NULL, 2))
+                dev_err(&s->spi->dev, "SPI transfer GPIO data w failed\n");
+}
+
+/* GPIO chip data */
+static struct gpio_chip max3107_gpio_chip = {
+        .owner                  = THIS_MODULE,
+        .direction_input        = max3107_gpio_direction_in,
+        .direction_output       = max3107_gpio_direction_out,
+        .get                    = max3107_gpio_get,
+        .set                    = max3107_gpio_set,
+        .can_sleep              = 1,
+        .base                   = MAX3107_GPIO_BASE,
+        .ngpio                  = MAX3107_GPIO_COUNT,
+};
+
+/**
+ *      max3107_aava_reset      -       reset on AAVA systems
+ *      @spi: The SPI device we are probing
+ *
+ *      Reset the device ready for probing.
+ */
+
+static int max3107_aava_reset(struct spi_device *spi)
+{
+        /* Reset the chip */
+        if (gpio_request(MAX3107_RESET_GPIO, "max3107")) {
+                pr_err("Requesting RESET GPIO failed\n");
+                return -EIO;
+        }
+        if (gpio_direction_output(MAX3107_RESET_GPIO, 0)) {
+                pr_err("Setting RESET GPIO to 0 failed\n");
+                gpio_free(MAX3107_RESET_GPIO);
+                return -EIO;
+        }
+        msleep(MAX3107_RESET_DELAY);
+        if (gpio_direction_output(MAX3107_RESET_GPIO, 1)) {
+                pr_err("Setting RESET GPIO to 1 failed\n");
+                gpio_free(MAX3107_RESET_GPIO);
+                return -EIO;
+        }
+        gpio_free(MAX3107_RESET_GPIO);
+        msleep(MAX3107_WAKEUP_DELAY);
+        return 0;
+}
+
+static int max3107_aava_configure(struct max3107_port *s)
+{
+        int retval;
+
+        /* Initialize GPIO chip data */
+        s->chip = max3107_gpio_chip;
+        s->chip.label = s->spi->modalias;
+        s->chip.dev = &s->spi->dev;
+
+        /* Add GPIO chip */
+        retval = gpiochip_add(&s->chip);
+        if (retval) {
+                dev_err(&s->spi->dev, "Adding GPIO chip failed\n");
+                return retval;
+        }
+
+        /* Temporary fix for EV2 boot problems, set modem reset to 0 */
+        max3107_gpio_direction_out(&s->chip, 3, 0);
+        return 0;
+}
+
+#if 0
+/* This will get enabled once we have the board stuff merged for this
+   specific case */
+
+static const struct baud_table brg13_ext[] = {
+        { 300,    MAX3107_BRG13_B300 },
+        { 600,    MAX3107_BRG13_B600 },
+        { 1200,   MAX3107_BRG13_B1200 },
+        { 2400,   MAX3107_BRG13_B2400 },
+        { 4800,   MAX3107_BRG13_B4800 },
+        { 9600,   MAX3107_BRG13_B9600 },
+        { 19200,  MAX3107_BRG13_B19200 },
+        { 57600,  MAX3107_BRG13_B57600 },
+        { 115200, MAX3107_BRG13_B115200 },
+        { 230400, MAX3107_BRG13_B230400 },
+        { 460800, MAX3107_BRG13_B460800 },
+        { 921600, MAX3107_BRG13_B921600 },
+        { 0, 0 }
+};
+
+static void max3107_aava_init(struct max3107_port *s)
+{
+        /*override for AAVA SC specific*/
+        if (mrst_platform_id() == MRST_PLATFORM_AAVA_SC) {
+                if (get_koski_build_id() <= KOSKI_EV2)
+                        if (s->ext_clk) {
+                                s->brg_cfg = MAX3107_BRG13_B9600;
+                                s->baud_tbl = (struct baud_table *)brg13_ext;
+                        }
+        }
+}
+#endif
+
+static int __devexit max3107_aava_remove(struct spi_device *spi)
+{
+        struct max3107_port *s = dev_get_drvdata(&spi->dev);
+
+        /* Remove GPIO chip */
+        if (gpiochip_remove(&s->chip))
+                dev_warn(&spi->dev, "Removing GPIO chip failed\n");
+
+        /* Then do the default remove */
+        return max3107_remove(spi);
+}
+
+/* Platform data */
+static struct max3107_plat aava_plat_data = {
+        .loopback               = 0,
+        .ext_clk                = 1,
+/*      .init                   = max3107_aava_init, */
+        .configure              = max3107_aava_configure,
+        .hw_suspend             = max3107_hw_susp,
+        .polled_mode            = 0,
+        .poll_time              = 0,
+};
+
+
+static int __devinit max3107_probe_aava(struct spi_device *spi)
+{
+        int err = max3107_aava_reset(spi);
+        if (err < 0)
+                return err;
+        return max3107_probe(spi, &aava_plat_data);
+}
+
+/* Spi driver data */
+static struct spi_driver max3107_driver = {
+        .driver = {
+                .name           = "aava-max3107",
+                .bus            = &spi_bus_type,
+                .owner          = THIS_MODULE,
+        },
+        .probe          = max3107_probe_aava,
+        .remove         = __devexit_p(max3107_aava_remove),
+        .suspend        = max3107_suspend,
+        .resume         = max3107_resume,
+};
+
+/* Driver init function */
+static int __init max3107_init(void)
+{
+        return spi_register_driver(&max3107_driver);
+}
+
+/* Driver exit function */
+static void __exit max3107_exit(void)
+{
+        spi_unregister_driver(&max3107_driver);
+}
+
+module_init(max3107_init);
+module_exit(max3107_exit);
+
+MODULE_DESCRIPTION("MAX3107 driver");
+MODULE_AUTHOR("Aavamobile");
+MODULE_ALIAS("aava-max3107-spi");
+MODULE_LICENSE("GPL v2");