12 files changed, 65 insertions, 45 deletions

diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 4d75cdfa0a0a..afb7ddf200e0 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -2358,13 +2358,10 @@ static int __devexit serial8250_remove(struct device *dev)
         return 0;
 }
 
-static int serial8250_suspend(struct device *dev, pm_message_t state, u32 level)
+static int serial8250_suspend(struct device *dev, pm_message_t state)
 {
         int i;
 
-        if (level != SUSPEND_DISABLE)
-                return 0;
-
         for (i = 0; i < UART_NR; i++) {
                 struct uart_8250_port *up = &serial8250_ports[i];
 
@@ -2375,13 +2372,10 @@ static int serial8250_suspend(struct device *dev, pm_message_t state, u32 level)
         return 0;
 }
 
-static int serial8250_resume(struct device *dev, u32 level)
+static int serial8250_resume(struct device *dev)
 {
         int i;
 
-        if (level != RESUME_ENABLE)
-                return 0;
-
         for (i = 0; i < UART_NR; i++) {
                 struct uart_8250_port *up = &serial8250_ports[i];
 
diff --git a/drivers/serial/8250_gsc.c b/drivers/serial/8250_gsc.c
index 431aa5761a7a..8b4947933d9b 100644
--- a/drivers/serial/8250_gsc.c
+++ b/drivers/serial/8250_gsc.c
@@ -29,7 +29,6 @@
 static int __init 
 serial_init_chip(struct parisc_device *dev)
 {
-        static int serial_line_nr;
         struct uart_port port;
         unsigned long address;
         int err;
@@ -42,12 +41,13 @@ serial_init_chip(struct parisc_device *dev)
                  */
                 if (parisc_parent(dev)->id.hw_type != HPHW_IOA) {
                         printk(KERN_INFO "Serial: device 0x%lx not configured.\n"
-                                "Enable support for Wax, Lasi, Asp or Dino.\n", dev->hpa);
+                                "Enable support for Wax, Lasi, Asp or Dino.\n",
+                                dev->hpa.start);
                 }
                 return -ENODEV;
         }
 
-        address = dev->hpa;
+        address = dev->hpa.start;
         if (dev->id.sversion != 0x8d) {
                 address += 0x800;
         }
diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c
index 679e678c7e6a..ddd0307fece2 100644
--- a/drivers/serial/amba-pl010.c
+++ b/drivers/serial/amba-pl010.c
@@ -50,6 +50,7 @@
 
 #include <asm/io.h>
 #include <asm/irq.h>
+#include <asm/hardware.h>
 #include <asm/hardware/amba.h>
 #include <asm/hardware/amba_serial.h>
 
diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c
index 1ff629c74750..938d185841c9 100644
--- a/drivers/serial/amba-pl011.c
+++ b/drivers/serial/amba-pl011.c
@@ -50,6 +50,7 @@
 
 #include <asm/io.h>
 #include <asm/irq.h>
+#include <asm/sizes.h>
 #include <asm/hardware/amba.h>
 #include <asm/hardware/clock.h>
 #include <asm/hardware/amba_serial.h>
diff --git a/drivers/serial/clps711x.c b/drivers/serial/clps711x.c
index 87ef368384fb..6a67e8f585b3 100644
--- a/drivers/serial/clps711x.c
+++ b/drivers/serial/clps711x.c
@@ -408,7 +408,11 @@ static struct uart_port clps711x_ports[UART_NR] = {
         {
                 .iobase         = SYSCON1,
                 .irq            = IRQ_UTXINT1, /* IRQ_URXINT1, IRQ_UMSINT */
+#ifdef CONFIG_MP1000_90MHZ
+                .uartclk        = 4515840,
+#else
                 .uartclk        = 3686400,
+#endif
                 .fifosize       = 16,
                 .ops            = &clps711x_pops,
                 .line           = 0,
@@ -417,7 +421,11 @@ static struct uart_port clps711x_ports[UART_NR] = {
         {
                 .iobase         = SYSCON2,
                 .irq            = IRQ_UTXINT2, /* IRQ_URXINT2 */
+#ifdef CONFIG_MP1000_90MHZ
+                .uartclk        = 4515840,
+#else
                 .uartclk        = 3686400,
+#endif
                 .fifosize       = 16,
                 .ops            = &clps711x_pops,
                 .line           = 1,
@@ -551,6 +559,7 @@ console_initcall(clps711xuart_console_init);
 static struct uart_driver clps711x_reg = {
         .driver_name            = "ttyCL",
         .dev_name               = "ttyCL",
+        .devfs_name             = "ttyCL",
         .major                  = SERIAL_CLPS711X_MAJOR,
         .minor                  = SERIAL_CLPS711X_MINOR,
         .nr                     = UART_NR,
diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index bdb4e454b8b0..5b3933b0c997 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -921,21 +921,21 @@ static struct uart_driver imx_reg = {
         .cons           = IMX_CONSOLE,
 };
 
-static int serial_imx_suspend(struct device *_dev, pm_message_t state, u32 level)
+static int serial_imx_suspend(struct device *_dev, pm_message_t state)
 {
         struct imx_port *sport = dev_get_drvdata(_dev);
 
-        if (sport && level == SUSPEND_DISABLE)
+        if (sport)
                 uart_suspend_port(&imx_reg, &sport->port);
 
         return 0;
 }
 
-static int serial_imx_resume(struct device *_dev, u32 level)
+static int serial_imx_resume(struct device *_dev)
 {
         struct imx_port *sport = dev_get_drvdata(_dev);
 
-        if (sport && level == RESUME_ENABLE)
+        if (sport)
                 uart_resume_port(&imx_reg, &sport->port);
 
         return 0;
diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c
index 0585ab27ffde..8a79968f8ce1 100644
--- a/drivers/serial/mpc52xx_uart.c
+++ b/drivers/serial/mpc52xx_uart.c
@@ -781,22 +781,22 @@ mpc52xx_uart_remove(struct device *dev)
 
 #ifdef CONFIG_PM
 static int
-mpc52xx_uart_suspend(struct device *dev, pm_message_t state, u32 level)
+mpc52xx_uart_suspend(struct device *dev, pm_message_t state)
 {
         struct uart_port *port = (struct uart_port *) dev_get_drvdata(dev);
 
-        if (sport && level == SUSPEND_DISABLE)
+        if (sport)
                 uart_suspend_port(&mpc52xx_uart_driver, port);
 
         return 0;
 }
 
 static int
-mpc52xx_uart_resume(struct device *dev, u32 level)
+mpc52xx_uart_resume(struct device *dev)
 {
         struct uart_port *port = (struct uart_port *) dev_get_drvdata(dev);
 
-        if (port && level == RESUME_ENABLE)
+        if (port)
                 uart_resume_port(&mpc52xx_uart_driver, port);
 
         return 0;
diff --git a/drivers/serial/mux.c b/drivers/serial/mux.c
index 189064607709..660bae5ba179 100644
--- a/drivers/serial/mux.c
+++ b/drivers/serial/mux.c
@@ -27,6 +27,7 @@
 #include <linux/delay.h> /* for udelay */
 #include <linux/device.h>
 #include <asm/io.h>
+#include <asm/irq.h>
 #include <asm/parisc-device.h>
 
 #ifdef CONFIG_MAGIC_SYSRQ
@@ -444,7 +445,7 @@ static int __init mux_probe(struct parisc_device *dev)
         unsigned long bytecnt;
         struct uart_port *port;
 
-        status = pdc_iodc_read(&bytecnt, dev->hpa, 0, iodc_data, 32);
+        status = pdc_iodc_read(&bytecnt, dev->hpa.start, 0, iodc_data, 32);
         if(status != PDC_OK) {
                 printk(KERN_ERR "Serial mux: Unable to read IODC.\n");
                 return 1;
@@ -469,16 +470,18 @@ static int __init mux_probe(struct parisc_device *dev)
         for(i = 0; i < ports; ++i, ++port_cnt) {
                 port = &mux_ports[port_cnt];
                 port->iobase    = 0;
-                port->mapbase   = dev->hpa + MUX_OFFSET + (i * MUX_LINE_OFFSET);
+                port->mapbase   = dev->hpa.start + MUX_OFFSET +
+                                                (i * MUX_LINE_OFFSET);
                 port->membase   = ioremap(port->mapbase, MUX_LINE_OFFSET);
                 port->iotype    = SERIAL_IO_MEM;
                 port->type      = PORT_MUX;
-                port->irq       = SERIAL_IRQ_NONE;
+                port->irq       = NO_IRQ;
                 port->uartclk   = 0;
                 port->fifosize  = MUX_FIFO_SIZE;
                 port->ops       = &mux_pops;
                 port->flags     = UPF_BOOT_AUTOCONF;
                 port->line      = port_cnt;
+                spin_lock_init(&port->lock);
                 status = uart_add_one_port(&mux_driver, port);
                 BUG_ON(status);
         }
@@ -497,7 +500,7 @@ static struct parisc_device_id mux_tbl[] = {
 MODULE_DEVICE_TABLE(parisc, mux_tbl);
 
 static struct parisc_driver serial_mux_driver = {
-        .name =         "Serial MUX",
+        .name =         "serial_mux",
         .id_table =     mux_tbl,
         .probe =        mux_probe,
 };
diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c
index 90c2a86c421b..8cc4cedadd99 100644
--- a/drivers/serial/pxa.c
+++ b/drivers/serial/pxa.c
@@ -358,6 +358,9 @@ static int serial_pxa_startup(struct uart_port *port)
         unsigned long flags;
         int retval;
 
+        if (port->line == 3) /* HWUART */
+                up->mcr |= UART_MCR_AFE;
+        else
         up->mcr = 0;
 
         /*
@@ -481,8 +484,10 @@ serial_pxa_set_termios(struct uart_port *port, struct termios *termios,
 
         if ((up->port.uartclk / quot) < (2400 * 16))
                 fcr = UART_FCR_ENABLE_FIFO | UART_FCR_PXAR1;
-        else
+        else if ((up->port.uartclk / quot) < (230400 * 16))
                 fcr = UART_FCR_ENABLE_FIFO | UART_FCR_PXAR8;
+        else
+                fcr = UART_FCR_ENABLE_FIFO | UART_FCR_PXAR32;
 
         /*
          * Ok, we're now changing the port state.  Do it with
@@ -772,6 +777,20 @@ static struct uart_pxa_port serial_pxa_ports[] = {
                 .ops            = &serial_pxa_pops,
                 .line           = 2,
         },
+  }, {  /* HWUART */
+        .name   = "HWUART",
+        .cken   = CKEN4_HWUART,
+        .port = {
+                .type           = PORT_PXA,
+                .iotype         = UPIO_MEM,
+                .membase        = (void *)&HWUART,
+                .mapbase        = __PREG(HWUART),
+                .irq            = IRQ_HWUART,
+                .uartclk        = 921600 * 16,
+                .fifosize       = 64,
+                .ops            = &serial_pxa_pops,
+                .line           = 3,
+        },
   }
 };
 
@@ -786,21 +805,21 @@ static struct uart_driver serial_pxa_reg = {
         .cons           = PXA_CONSOLE,
 };
 
-static int serial_pxa_suspend(struct device *_dev, pm_message_t state, u32 level)
+static int serial_pxa_suspend(struct device *_dev, pm_message_t state)
 {
         struct uart_pxa_port *sport = dev_get_drvdata(_dev);
 
-        if (sport && level == SUSPEND_DISABLE)
+        if (sport)
                 uart_suspend_port(&serial_pxa_reg, &sport->port);
 
         return 0;
 }
 
-static int serial_pxa_resume(struct device *_dev, u32 level)
+static int serial_pxa_resume(struct device *_dev)
 {
         struct uart_pxa_port *sport = dev_get_drvdata(_dev);
 
-        if (sport && level == RESUME_ENABLE)
+        if (sport)
                 uart_resume_port(&serial_pxa_reg, &sport->port);
 
         return 0;
diff --git a/drivers/serial/s3c2410.c b/drivers/serial/s3c2410.c
index 52692aa345ec..06a17dff1a73 100644
--- a/drivers/serial/s3c2410.c
+++ b/drivers/serial/s3c2410.c
@@ -1134,23 +1134,22 @@ static int s3c24xx_serial_remove(struct device *_dev)
 
 #ifdef CONFIG_PM
 
-static int s3c24xx_serial_suspend(struct device *dev, pm_message_t state,
-                                  u32 level)
+static int s3c24xx_serial_suspend(struct device *dev, pm_message_t state)
 {
         struct uart_port *port = s3c24xx_dev_to_port(dev);
 
-        if (port && level == SUSPEND_DISABLE)
+        if (port)
                 uart_suspend_port(&s3c24xx_uart_drv, port);
 
         return 0;
 }
 
-static int s3c24xx_serial_resume(struct device *dev, u32 level)
+static int s3c24xx_serial_resume(struct device *dev)
 {
         struct uart_port *port = s3c24xx_dev_to_port(dev);
         struct s3c24xx_uart_port *ourport = to_ourport(port);
 
-        if (port && level == RESUME_ENABLE) {
+        if (port) {
                 clk_enable(ourport->clk);
                 s3c24xx_serial_resetport(port, s3c24xx_port_to_cfg(port));
                 clk_disable(ourport->clk);
diff --git a/drivers/serial/sa1100.c b/drivers/serial/sa1100.c
index dd8aed242357..c4a789e6af44 100644
--- a/drivers/serial/sa1100.c
+++ b/drivers/serial/sa1100.c
@@ -834,21 +834,21 @@ static struct uart_driver sa1100_reg = {
         .cons                   = SA1100_CONSOLE,
 };
 
-static int sa1100_serial_suspend(struct device *_dev, pm_message_t state, u32 level)
+static int sa1100_serial_suspend(struct device *_dev, pm_message_t state)
 {
         struct sa1100_port *sport = dev_get_drvdata(_dev);
 
-        if (sport && level == SUSPEND_DISABLE)
+        if (sport)
                 uart_suspend_port(&sa1100_reg, &sport->port);
 
         return 0;
 }
 
-static int sa1100_serial_resume(struct device *_dev, u32 level)
+static int sa1100_serial_resume(struct device *_dev)
 {
         struct sa1100_port *sport = dev_get_drvdata(_dev);
 
-        if (sport && level == RESUME_ENABLE)
+        if (sport)
                 uart_resume_port(&sa1100_reg, &sport->port);
 
         return 0;
diff --git a/drivers/serial/vr41xx_siu.c b/drivers/serial/vr41xx_siu.c
index 0c5d65a08f6e..2b623ab0e36e 100644
--- a/drivers/serial/vr41xx_siu.c
+++ b/drivers/serial/vr41xx_siu.c
@@ -976,14 +976,11 @@ static int siu_remove(struct device *dev)
         return 0;
 }
 
-static int siu_suspend(struct device *dev, pm_message_t state, u32 level)
+static int siu_suspend(struct device *dev, pm_message_t state)
 {
         struct uart_port *port;
         int i;
 
-        if (level != SUSPEND_DISABLE)
-                return 0;
-
         for (i = 0; i < siu_uart_driver.nr; i++) {
                 port = &siu_uart_ports[i];
                 if ((port->type == PORT_VR41XX_SIU ||
@@ -995,14 +992,11 @@ static int siu_suspend(struct device *dev, pm_message_t state, u32 level)
         return 0;
 }
 
-static int siu_resume(struct device *dev, u32 level)
+static int siu_resume(struct device *dev)
 {
         struct uart_port *port;
         int i;
 
-        if (level != RESUME_ENABLE)
-                return 0;
-
         for (i = 0; i < siu_uart_driver.nr; i++) {
                 port = &siu_uart_ports[i];
                 if ((port->type == PORT_VR41XX_SIU ||