aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/scsi/qla2xxx/qla_sup.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/qla2xxx/qla_sup.c')
-rw-r--r--drivers/scsi/qla2xxx/qla_sup.c963
1 files changed, 963 insertions, 0 deletions
diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c
index f4d755a643e4..3866a5760f15 100644
--- a/drivers/scsi/qla2xxx/qla_sup.c
+++ b/drivers/scsi/qla2xxx/qla_sup.c
@@ -695,3 +695,966 @@ qla24xx_write_nvram_data(scsi_qla_host_t *ha, uint8_t *buf, uint32_t naddr,
695 695
696 return ret; 696 return ret;
697} 697}
698
699
700static inline void
701qla2x00_flip_colors(scsi_qla_host_t *ha, uint16_t *pflags)
702{
703 if (IS_QLA2322(ha)) {
704 /* Flip all colors. */
705 if (ha->beacon_color_state == QLA_LED_ALL_ON) {
706 /* Turn off. */
707 ha->beacon_color_state = 0;
708 *pflags = GPIO_LED_ALL_OFF;
709 } else {
710 /* Turn on. */
711 ha->beacon_color_state = QLA_LED_ALL_ON;
712 *pflags = GPIO_LED_RGA_ON;
713 }
714 } else {
715 /* Flip green led only. */
716 if (ha->beacon_color_state == QLA_LED_GRN_ON) {
717 /* Turn off. */
718 ha->beacon_color_state = 0;
719 *pflags = GPIO_LED_GREEN_OFF_AMBER_OFF;
720 } else {
721 /* Turn on. */
722 ha->beacon_color_state = QLA_LED_GRN_ON;
723 *pflags = GPIO_LED_GREEN_ON_AMBER_OFF;
724 }
725 }
726}
727
728void
729qla2x00_beacon_blink(struct scsi_qla_host *ha)
730{
731 uint16_t gpio_enable;
732 uint16_t gpio_data;
733 uint16_t led_color = 0;
734 unsigned long flags;
735 struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
736
737 if (ha->pio_address)
738 reg = (struct device_reg_2xxx __iomem *)ha->pio_address;
739
740 spin_lock_irqsave(&ha->hardware_lock, flags);
741
742 /* Save the Original GPIOE. */
743 if (ha->pio_address) {
744 gpio_enable = RD_REG_WORD_PIO(&reg->gpioe);
745 gpio_data = RD_REG_WORD_PIO(&reg->gpiod);
746 } else {
747 gpio_enable = RD_REG_WORD(&reg->gpioe);
748 gpio_data = RD_REG_WORD(&reg->gpiod);
749 }
750
751 /* Set the modified gpio_enable values */
752 gpio_enable |= GPIO_LED_MASK;
753
754 if (ha->pio_address) {
755 WRT_REG_WORD_PIO(&reg->gpioe, gpio_enable);
756 } else {
757 WRT_REG_WORD(&reg->gpioe, gpio_enable);
758 RD_REG_WORD(&reg->gpioe);
759 }
760
761 qla2x00_flip_colors(ha, &led_color);
762
763 /* Clear out any previously set LED color. */
764 gpio_data &= ~GPIO_LED_MASK;
765
766 /* Set the new input LED color to GPIOD. */
767 gpio_data |= led_color;
768
769 /* Set the modified gpio_data values */
770 if (ha->pio_address) {
771 WRT_REG_WORD_PIO(&reg->gpiod, gpio_data);
772 } else {
773 WRT_REG_WORD(&reg->gpiod, gpio_data);
774 RD_REG_WORD(&reg->gpiod);
775 }
776
777 spin_unlock_irqrestore(&ha->hardware_lock, flags);
778}
779
780int
781qla2x00_beacon_on(struct scsi_qla_host *ha)
782{
783 uint16_t gpio_enable;
784 uint16_t gpio_data;
785 unsigned long flags;
786 struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
787
788 ha->fw_options[1] &= ~FO1_SET_EMPHASIS_SWING;
789 ha->fw_options[1] |= FO1_DISABLE_GPIO6_7;
790
791 if (qla2x00_set_fw_options(ha, ha->fw_options) != QLA_SUCCESS) {
792 qla_printk(KERN_WARNING, ha,
793 "Unable to update fw options (beacon on).\n");
794 return QLA_FUNCTION_FAILED;
795 }
796
797 if (ha->pio_address)
798 reg = (struct device_reg_2xxx __iomem *)ha->pio_address;
799
800 /* Turn off LEDs. */
801 spin_lock_irqsave(&ha->hardware_lock, flags);
802 if (ha->pio_address) {
803 gpio_enable = RD_REG_WORD_PIO(&reg->gpioe);
804 gpio_data = RD_REG_WORD_PIO(&reg->gpiod);
805 } else {
806 gpio_enable = RD_REG_WORD(&reg->gpioe);
807 gpio_data = RD_REG_WORD(&reg->gpiod);
808 }
809 gpio_enable |= GPIO_LED_MASK;
810
811 /* Set the modified gpio_enable values. */
812 if (ha->pio_address) {
813 WRT_REG_WORD_PIO(&reg->gpioe, gpio_enable);
814 } else {
815 WRT_REG_WORD(&reg->gpioe, gpio_enable);
816 RD_REG_WORD(&reg->gpioe);
817 }
818
819 /* Clear out previously set LED colour. */
820 gpio_data &= ~GPIO_LED_MASK;
821 if (ha->pio_address) {
822 WRT_REG_WORD_PIO(&reg->gpiod, gpio_data);
823 } else {
824 WRT_REG_WORD(&reg->gpiod, gpio_data);
825 RD_REG_WORD(&reg->gpiod);
826 }
827 spin_unlock_irqrestore(&ha->hardware_lock, flags);
828
829 /*
830 * Let the per HBA timer kick off the blinking process based on
831 * the following flags. No need to do anything else now.
832 */
833 ha->beacon_blink_led = 1;
834 ha->beacon_color_state = 0;
835
836 return QLA_SUCCESS;
837}
838
839int
840qla2x00_beacon_off(struct scsi_qla_host *ha)
841{
842 int rval = QLA_SUCCESS;
843
844 ha->beacon_blink_led = 0;
845
846 /* Set the on flag so when it gets flipped it will be off. */
847 if (IS_QLA2322(ha))
848 ha->beacon_color_state = QLA_LED_ALL_ON;
849 else
850 ha->beacon_color_state = QLA_LED_GRN_ON;
851
852 ha->isp_ops.beacon_blink(ha); /* This turns green LED off */
853
854 ha->fw_options[1] &= ~FO1_SET_EMPHASIS_SWING;
855 ha->fw_options[1] &= ~FO1_DISABLE_GPIO6_7;
856
857 rval = qla2x00_set_fw_options(ha, ha->fw_options);
858 if (rval != QLA_SUCCESS)
859 qla_printk(KERN_WARNING, ha,
860 "Unable to update fw options (beacon off).\n");
861 return rval;
862}
863
864
865static inline void
866qla24xx_flip_colors(scsi_qla_host_t *ha, uint16_t *pflags)
867{
868 /* Flip all colors. */
869 if (ha->beacon_color_state == QLA_LED_ALL_ON) {
870 /* Turn off. */
871 ha->beacon_color_state = 0;
872 *pflags = 0;
873 } else {
874 /* Turn on. */
875 ha->beacon_color_state = QLA_LED_ALL_ON;
876 *pflags = GPDX_LED_YELLOW_ON | GPDX_LED_AMBER_ON;
877 }
878}
879
880void
881qla24xx_beacon_blink(struct scsi_qla_host *ha)
882{
883 uint16_t led_color = 0;
884 uint32_t gpio_data;
885 unsigned long flags;
886 struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
887
888 /* Save the Original GPIOD. */
889 spin_lock_irqsave(&ha->hardware_lock, flags);
890 gpio_data = RD_REG_DWORD(&reg->gpiod);
891
892 /* Enable the gpio_data reg for update. */
893 gpio_data |= GPDX_LED_UPDATE_MASK;
894
895 WRT_REG_DWORD(&reg->gpiod, gpio_data);
896 gpio_data = RD_REG_DWORD(&reg->gpiod);
897
898 /* Set the color bits. */
899 qla24xx_flip_colors(ha, &led_color);
900
901 /* Clear out any previously set LED color. */
902 gpio_data &= ~GPDX_LED_COLOR_MASK;
903
904 /* Set the new input LED color to GPIOD. */
905 gpio_data |= led_color;
906
907 /* Set the modified gpio_data values. */
908 WRT_REG_DWORD(&reg->gpiod, gpio_data);
909 gpio_data = RD_REG_DWORD(&reg->gpiod);
910 spin_unlock_irqrestore(&ha->hardware_lock, flags);
911}
912
913int
914qla24xx_beacon_on(struct scsi_qla_host *ha)
915{
916 uint32_t gpio_data;
917 unsigned long flags;
918 struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
919
920 if (ha->beacon_blink_led == 0) {
921 /* Enable firmware for update */
922 ha->fw_options[1] |= ADD_FO1_DISABLE_GPIO_LED_CTRL;
923
924 if (qla2x00_set_fw_options(ha, ha->fw_options) != QLA_SUCCESS)
925 return QLA_FUNCTION_FAILED;
926
927 if (qla2x00_get_fw_options(ha, ha->fw_options) !=
928 QLA_SUCCESS) {
929 qla_printk(KERN_WARNING, ha,
930 "Unable to update fw options (beacon on).\n");
931 return QLA_FUNCTION_FAILED;
932 }
933
934 spin_lock_irqsave(&ha->hardware_lock, flags);
935 gpio_data = RD_REG_DWORD(&reg->gpiod);
936
937 /* Enable the gpio_data reg for update. */
938 gpio_data |= GPDX_LED_UPDATE_MASK;
939 WRT_REG_DWORD(&reg->gpiod, gpio_data);
940 RD_REG_DWORD(&reg->gpiod);
941
942 spin_unlock_irqrestore(&ha->hardware_lock, flags);
943 }
944
945 /* So all colors blink together. */
946 ha->beacon_color_state = 0;
947
948 /* Let the per HBA timer kick off the blinking process. */
949 ha->beacon_blink_led = 1;
950
951 return QLA_SUCCESS;
952}
953
954int
955qla24xx_beacon_off(struct scsi_qla_host *ha)
956{
957 uint32_t gpio_data;
958 unsigned long flags;
959 struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
960
961 ha->beacon_blink_led = 0;
962 ha->beacon_color_state = QLA_LED_ALL_ON;
963
964 ha->isp_ops.beacon_blink(ha); /* Will flip to all off. */
965
966 /* Give control back to firmware. */
967 spin_lock_irqsave(&ha->hardware_lock, flags);
968 gpio_data = RD_REG_DWORD(&reg->gpiod);
969
970 /* Disable the gpio_data reg for update. */
971 gpio_data &= ~GPDX_LED_UPDATE_MASK;
972 WRT_REG_DWORD(&reg->gpiod, gpio_data);
973 RD_REG_DWORD(&reg->gpiod);
974 spin_unlock_irqrestore(&ha->hardware_lock, flags);
975
976 ha->fw_options[1] &= ~ADD_FO1_DISABLE_GPIO_LED_CTRL;
977
978 if (qla2x00_set_fw_options(ha, ha->fw_options) != QLA_SUCCESS) {
979 qla_printk(KERN_WARNING, ha,
980 "Unable to update fw options (beacon off).\n");
981 return QLA_FUNCTION_FAILED;
982 }
983
984 if (qla2x00_get_fw_options(ha, ha->fw_options) != QLA_SUCCESS) {
985 qla_printk(KERN_WARNING, ha,
986 "Unable to get fw options (beacon off).\n");
987 return QLA_FUNCTION_FAILED;
988 }
989
990 return QLA_SUCCESS;
991}
992
993
994/*
995 * Flash support routines
996 */
997
998/**
999 * qla2x00_flash_enable() - Setup flash for reading and writing.
1000 * @ha: HA context
1001 */
1002static void
1003qla2x00_flash_enable(scsi_qla_host_t *ha)
1004{
1005 uint16_t data;
1006 struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
1007
1008 data = RD_REG_WORD(&reg->ctrl_status);
1009 data |= CSR_FLASH_ENABLE;
1010 WRT_REG_WORD(&reg->ctrl_status, data);
1011 RD_REG_WORD(&reg->ctrl_status); /* PCI Posting. */
1012}
1013
1014/**
1015 * qla2x00_flash_disable() - Disable flash and allow RISC to run.
1016 * @ha: HA context
1017 */
1018static void
1019qla2x00_flash_disable(scsi_qla_host_t *ha)
1020{
1021 uint16_t data;
1022 struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
1023
1024 data = RD_REG_WORD(&reg->ctrl_status);
1025 data &= ~(CSR_FLASH_ENABLE);
1026 WRT_REG_WORD(&reg->ctrl_status, data);
1027 RD_REG_WORD(&reg->ctrl_status); /* PCI Posting. */
1028}
1029
1030/**
1031 * qla2x00_read_flash_byte() - Reads a byte from flash
1032 * @ha: HA context
1033 * @addr: Address in flash to read
1034 *
1035 * A word is read from the chip, but, only the lower byte is valid.
1036 *
1037 * Returns the byte read from flash @addr.
1038 */
1039static uint8_t
1040qla2x00_read_flash_byte(scsi_qla_host_t *ha, uint32_t addr)
1041{
1042 uint16_t data;
1043 uint16_t bank_select;
1044 struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
1045
1046 bank_select = RD_REG_WORD(&reg->ctrl_status);
1047
1048 if (IS_QLA2322(ha) || IS_QLA6322(ha)) {
1049 /* Specify 64K address range: */
1050 /* clear out Module Select and Flash Address bits [19:16]. */
1051 bank_select &= ~0xf8;
1052 bank_select |= addr >> 12 & 0xf0;
1053 bank_select |= CSR_FLASH_64K_BANK;
1054 WRT_REG_WORD(&reg->ctrl_status, bank_select);
1055 RD_REG_WORD(&reg->ctrl_status); /* PCI Posting. */
1056
1057 WRT_REG_WORD(&reg->flash_address, (uint16_t)addr);
1058 data = RD_REG_WORD(&reg->flash_data);
1059
1060 return (uint8_t)data;
1061 }
1062
1063 /* Setup bit 16 of flash address. */
1064 if ((addr & BIT_16) && ((bank_select & CSR_FLASH_64K_BANK) == 0)) {
1065 bank_select |= CSR_FLASH_64K_BANK;
1066 WRT_REG_WORD(&reg->ctrl_status, bank_select);
1067 RD_REG_WORD(&reg->ctrl_status); /* PCI Posting. */
1068 } else if (((addr & BIT_16) == 0) &&
1069 (bank_select & CSR_FLASH_64K_BANK)) {
1070 bank_select &= ~(CSR_FLASH_64K_BANK);
1071 WRT_REG_WORD(&reg->ctrl_status, bank_select);
1072 RD_REG_WORD(&reg->ctrl_status); /* PCI Posting. */
1073 }
1074
1075 /* Always perform IO mapped accesses to the FLASH registers. */
1076 if (ha->pio_address) {
1077 uint16_t data2;
1078
1079 reg = (struct device_reg_2xxx __iomem *)ha->pio_address;
1080 WRT_REG_WORD_PIO(&reg->flash_address, (uint16_t)addr);
1081 do {
1082 data = RD_REG_WORD_PIO(&reg->flash_data);
1083 barrier();
1084 cpu_relax();
1085 data2 = RD_REG_WORD_PIO(&reg->flash_data);
1086 } while (data != data2);
1087 } else {
1088 WRT_REG_WORD(&reg->flash_address, (uint16_t)addr);
1089 data = qla2x00_debounce_register(&reg->flash_data);
1090 }
1091
1092 return (uint8_t)data;
1093}
1094
1095/**
1096 * qla2x00_write_flash_byte() - Write a byte to flash
1097 * @ha: HA context
1098 * @addr: Address in flash to write
1099 * @data: Data to write
1100 */
1101static void
1102qla2x00_write_flash_byte(scsi_qla_host_t *ha, uint32_t addr, uint8_t data)
1103{
1104 uint16_t bank_select;
1105 struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
1106
1107 bank_select = RD_REG_WORD(&reg->ctrl_status);
1108 if (IS_QLA2322(ha) || IS_QLA6322(ha)) {
1109 /* Specify 64K address range: */
1110 /* clear out Module Select and Flash Address bits [19:16]. */
1111 bank_select &= ~0xf8;
1112 bank_select |= addr >> 12 & 0xf0;
1113 bank_select |= CSR_FLASH_64K_BANK;
1114 WRT_REG_WORD(&reg->ctrl_status, bank_select);
1115 RD_REG_WORD(&reg->ctrl_status); /* PCI Posting. */
1116
1117 WRT_REG_WORD(&reg->flash_address, (uint16_t)addr);
1118 RD_REG_WORD(&reg->ctrl_status); /* PCI Posting. */
1119 WRT_REG_WORD(&reg->flash_data, (uint16_t)data);
1120 RD_REG_WORD(&reg->ctrl_status); /* PCI Posting. */
1121
1122 return;
1123 }
1124
1125 /* Setup bit 16 of flash address. */
1126 if ((addr & BIT_16) && ((bank_select & CSR_FLASH_64K_BANK) == 0)) {
1127 bank_select |= CSR_FLASH_64K_BANK;
1128 WRT_REG_WORD(&reg->ctrl_status, bank_select);
1129 RD_REG_WORD(&reg->ctrl_status); /* PCI Posting. */
1130 } else if (((addr & BIT_16) == 0) &&
1131 (bank_select & CSR_FLASH_64K_BANK)) {
1132 bank_select &= ~(CSR_FLASH_64K_BANK);
1133 WRT_REG_WORD(&reg->ctrl_status, bank_select);
1134 RD_REG_WORD(&reg->ctrl_status); /* PCI Posting. */
1135 }
1136
1137 /* Always perform IO mapped accesses to the FLASH registers. */
1138 if (ha->pio_address) {
1139 reg = (struct device_reg_2xxx __iomem *)ha->pio_address;
1140 WRT_REG_WORD_PIO(&reg->flash_address, (uint16_t)addr);
1141 WRT_REG_WORD_PIO(&reg->flash_data, (uint16_t)data);
1142 } else {
1143 WRT_REG_WORD(&reg->flash_address, (uint16_t)addr);
1144 RD_REG_WORD(&reg->ctrl_status); /* PCI Posting. */
1145 WRT_REG_WORD(&reg->flash_data, (uint16_t)data);
1146 RD_REG_WORD(&reg->ctrl_status); /* PCI Posting. */
1147 }
1148}
1149
1150/**
1151 * qla2x00_poll_flash() - Polls flash for completion.
1152 * @ha: HA context
1153 * @addr: Address in flash to poll
1154 * @poll_data: Data to be polled
1155 * @man_id: Flash manufacturer ID
1156 * @flash_id: Flash ID
1157 *
1158 * This function polls the device until bit 7 of what is read matches data
1159 * bit 7 or until data bit 5 becomes a 1. If that hapens, the flash ROM timed
1160 * out (a fatal error). The flash book recommeds reading bit 7 again after
1161 * reading bit 5 as a 1.
1162 *
1163 * Returns 0 on success, else non-zero.
1164 */
1165static int
1166qla2x00_poll_flash(scsi_qla_host_t *ha, uint32_t addr, uint8_t poll_data,
1167 uint8_t man_id, uint8_t flash_id)
1168{
1169 int status;
1170 uint8_t flash_data;
1171 uint32_t cnt;
1172
1173 status = 1;
1174
1175 /* Wait for 30 seconds for command to finish. */
1176 poll_data &= BIT_7;
1177 for (cnt = 3000000; cnt; cnt--) {
1178 flash_data = qla2x00_read_flash_byte(ha, addr);
1179 if ((flash_data & BIT_7) == poll_data) {
1180 status = 0;
1181 break;
1182 }
1183
1184 if (man_id != 0x40 && man_id != 0xda) {
1185 if ((flash_data & BIT_5) && cnt > 2)
1186 cnt = 2;
1187 }
1188 udelay(10);
1189 barrier();
1190 }
1191 return status;
1192}
1193
1194#define IS_OEM_001(ha) \
1195 ((ha)->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2322 && \
1196 (ha)->pdev->subsystem_vendor == 0x1028 && \
1197 (ha)->pdev->subsystem_device == 0x0170)
1198
1199/**
1200 * qla2x00_program_flash_address() - Programs a flash address
1201 * @ha: HA context
1202 * @addr: Address in flash to program
1203 * @data: Data to be written in flash
1204 * @man_id: Flash manufacturer ID
1205 * @flash_id: Flash ID
1206 *
1207 * Returns 0 on success, else non-zero.
1208 */
1209static int
1210qla2x00_program_flash_address(scsi_qla_host_t *ha, uint32_t addr, uint8_t data,
1211 uint8_t man_id, uint8_t flash_id)
1212{
1213 /* Write Program Command Sequence. */
1214 if (IS_OEM_001(ha)) {
1215 qla2x00_write_flash_byte(ha, 0xaaa, 0xaa);
1216 qla2x00_write_flash_byte(ha, 0x555, 0x55);
1217 qla2x00_write_flash_byte(ha, 0xaaa, 0xa0);
1218 qla2x00_write_flash_byte(ha, addr, data);
1219 } else {
1220 if (man_id == 0xda && flash_id == 0xc1) {
1221 qla2x00_write_flash_byte(ha, addr, data);
1222 if (addr & 0x7e)
1223 return 0;
1224 } else {
1225 qla2x00_write_flash_byte(ha, 0x5555, 0xaa);
1226 qla2x00_write_flash_byte(ha, 0x2aaa, 0x55);
1227 qla2x00_write_flash_byte(ha, 0x5555, 0xa0);
1228 qla2x00_write_flash_byte(ha, addr, data);
1229 }
1230 }
1231
1232 udelay(150);
1233
1234 /* Wait for write to complete. */
1235 return qla2x00_poll_flash(ha, addr, data, man_id, flash_id);
1236}
1237
1238/**
1239 * qla2x00_erase_flash() - Erase the flash.
1240 * @ha: HA context
1241 * @man_id: Flash manufacturer ID
1242 * @flash_id: Flash ID
1243 *
1244 * Returns 0 on success, else non-zero.
1245 */
1246static int
1247qla2x00_erase_flash(scsi_qla_host_t *ha, uint8_t man_id, uint8_t flash_id)
1248{
1249 /* Individual Sector Erase Command Sequence */
1250 if (IS_OEM_001(ha)) {
1251 qla2x00_write_flash_byte(ha, 0xaaa, 0xaa);
1252 qla2x00_write_flash_byte(ha, 0x555, 0x55);
1253 qla2x00_write_flash_byte(ha, 0xaaa, 0x80);
1254 qla2x00_write_flash_byte(ha, 0xaaa, 0xaa);
1255 qla2x00_write_flash_byte(ha, 0x555, 0x55);
1256 qla2x00_write_flash_byte(ha, 0xaaa, 0x10);
1257 } else {
1258 qla2x00_write_flash_byte(ha, 0x5555, 0xaa);
1259 qla2x00_write_flash_byte(ha, 0x2aaa, 0x55);
1260 qla2x00_write_flash_byte(ha, 0x5555, 0x80);
1261 qla2x00_write_flash_byte(ha, 0x5555, 0xaa);
1262 qla2x00_write_flash_byte(ha, 0x2aaa, 0x55);
1263 qla2x00_write_flash_byte(ha, 0x5555, 0x10);
1264 }
1265
1266 udelay(150);
1267
1268 /* Wait for erase to complete. */
1269 return qla2x00_poll_flash(ha, 0x00, 0x80, man_id, flash_id);
1270}
1271
1272/**
1273 * qla2x00_erase_flash_sector() - Erase a flash sector.
1274 * @ha: HA context
1275 * @addr: Flash sector to erase
1276 * @sec_mask: Sector address mask
1277 * @man_id: Flash manufacturer ID
1278 * @flash_id: Flash ID
1279 *
1280 * Returns 0 on success, else non-zero.
1281 */
1282static int
1283qla2x00_erase_flash_sector(scsi_qla_host_t *ha, uint32_t addr,
1284 uint32_t sec_mask, uint8_t man_id, uint8_t flash_id)
1285{
1286 /* Individual Sector Erase Command Sequence */
1287 qla2x00_write_flash_byte(ha, 0x5555, 0xaa);
1288 qla2x00_write_flash_byte(ha, 0x2aaa, 0x55);
1289 qla2x00_write_flash_byte(ha, 0x5555, 0x80);
1290 qla2x00_write_flash_byte(ha, 0x5555, 0xaa);
1291 qla2x00_write_flash_byte(ha, 0x2aaa, 0x55);
1292 if (man_id == 0x1f && flash_id == 0x13)
1293 qla2x00_write_flash_byte(ha, addr & sec_mask, 0x10);
1294 else
1295 qla2x00_write_flash_byte(ha, addr & sec_mask, 0x30);
1296
1297 udelay(150);
1298
1299 /* Wait for erase to complete. */
1300 return qla2x00_poll_flash(ha, addr, 0x80, man_id, flash_id);
1301}
1302
1303/**
1304 * qla2x00_get_flash_manufacturer() - Read manufacturer ID from flash chip.
1305 * @man_id: Flash manufacturer ID
1306 * @flash_id: Flash ID
1307 */
1308static void
1309qla2x00_get_flash_manufacturer(scsi_qla_host_t *ha, uint8_t *man_id,
1310 uint8_t *flash_id)
1311{
1312 qla2x00_write_flash_byte(ha, 0x5555, 0xaa);
1313 qla2x00_write_flash_byte(ha, 0x2aaa, 0x55);
1314 qla2x00_write_flash_byte(ha, 0x5555, 0x90);
1315 *man_id = qla2x00_read_flash_byte(ha, 0x0000);
1316 *flash_id = qla2x00_read_flash_byte(ha, 0x0001);
1317 qla2x00_write_flash_byte(ha, 0x5555, 0xaa);
1318 qla2x00_write_flash_byte(ha, 0x2aaa, 0x55);
1319 qla2x00_write_flash_byte(ha, 0x5555, 0xf0);
1320}
1321
1322
1323static inline void
1324qla2x00_suspend_hba(struct scsi_qla_host *ha)
1325{
1326 int cnt;
1327 unsigned long flags;
1328 struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
1329
1330 /* Suspend HBA. */
1331 scsi_block_requests(ha->host);
1332 ha->isp_ops.disable_intrs(ha);
1333 set_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags);
1334
1335 /* Pause RISC. */
1336 spin_lock_irqsave(&ha->hardware_lock, flags);
1337 WRT_REG_WORD(&reg->hccr, HCCR_PAUSE_RISC);
1338 RD_REG_WORD(&reg->hccr);
1339 if (IS_QLA2100(ha) || IS_QLA2200(ha) || IS_QLA2300(ha)) {
1340 for (cnt = 0; cnt < 30000; cnt++) {
1341 if ((RD_REG_WORD(&reg->hccr) & HCCR_RISC_PAUSE) != 0)
1342 break;
1343 udelay(100);
1344 }
1345 } else {
1346 udelay(10);
1347 }
1348 spin_unlock_irqrestore(&ha->hardware_lock, flags);
1349}
1350
1351static inline void
1352qla2x00_resume_hba(struct scsi_qla_host *ha)
1353{
1354 /* Resume HBA. */
1355 clear_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags);
1356 set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
1357 up(ha->dpc_wait);
1358 qla2x00_wait_for_hba_online(ha);
1359 scsi_unblock_requests(ha->host);
1360}
1361
1362uint8_t *
1363qla2x00_read_optrom_data(struct scsi_qla_host *ha, uint8_t *buf,
1364 uint32_t offset, uint32_t length)
1365{
1366 unsigned long flags;
1367 uint32_t addr, midpoint;
1368 uint8_t *data;
1369 struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
1370
1371 /* Suspend HBA. */
1372 qla2x00_suspend_hba(ha);
1373
1374 /* Go with read. */
1375 spin_lock_irqsave(&ha->hardware_lock, flags);
1376 midpoint = ha->optrom_size / 2;
1377
1378 qla2x00_flash_enable(ha);
1379 WRT_REG_WORD(&reg->nvram, 0);
1380 RD_REG_WORD(&reg->nvram); /* PCI Posting. */
1381 for (addr = offset, data = buf; addr < length; addr++, data++) {
1382 if (addr == midpoint) {
1383 WRT_REG_WORD(&reg->nvram, NVR_SELECT);
1384 RD_REG_WORD(&reg->nvram); /* PCI Posting. */
1385 }
1386
1387 *data = qla2x00_read_flash_byte(ha, addr);
1388 }
1389 qla2x00_flash_disable(ha);
1390 spin_unlock_irqrestore(&ha->hardware_lock, flags);
1391
1392 /* Resume HBA. */
1393 qla2x00_resume_hba(ha);
1394
1395 return buf;
1396}
1397
1398int
1399qla2x00_write_optrom_data(struct scsi_qla_host *ha, uint8_t *buf,
1400 uint32_t offset, uint32_t length)
1401{
1402
1403 int rval;
1404 unsigned long flags;
1405 uint8_t man_id, flash_id, sec_number, data;
1406 uint16_t wd;
1407 uint32_t addr, liter, sec_mask, rest_addr;
1408 struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
1409
1410 /* Suspend HBA. */
1411 qla2x00_suspend_hba(ha);
1412
1413 rval = QLA_SUCCESS;
1414 sec_number = 0;
1415
1416 /* Reset ISP chip. */
1417 spin_lock_irqsave(&ha->hardware_lock, flags);
1418 WRT_REG_WORD(&reg->ctrl_status, CSR_ISP_SOFT_RESET);
1419 pci_read_config_word(ha->pdev, PCI_COMMAND, &wd);
1420
1421 /* Go with write. */
1422 qla2x00_flash_enable(ha);
1423 do { /* Loop once to provide quick error exit */
1424 /* Structure of flash memory based on manufacturer */
1425 if (IS_OEM_001(ha)) {
1426 /* OEM variant with special flash part. */
1427 man_id = flash_id = 0;
1428 rest_addr = 0xffff;
1429 sec_mask = 0x10000;
1430 goto update_flash;
1431 }
1432 qla2x00_get_flash_manufacturer(ha, &man_id, &flash_id);
1433 switch (man_id) {
1434 case 0x20: /* ST flash. */
1435 if (flash_id == 0xd2 || flash_id == 0xe3) {
1436 /*
1437 * ST m29w008at part - 64kb sector size with
1438 * 32kb,8kb,8kb,16kb sectors at memory address
1439 * 0xf0000.
1440 */
1441 rest_addr = 0xffff;
1442 sec_mask = 0x10000;
1443 break;
1444 }
1445 /*
1446 * ST m29w010b part - 16kb sector size
1447 * Default to 16kb sectors
1448 */
1449 rest_addr = 0x3fff;
1450 sec_mask = 0x1c000;
1451 break;
1452 case 0x40: /* Mostel flash. */
1453 /* Mostel v29c51001 part - 512 byte sector size. */
1454 rest_addr = 0x1ff;
1455 sec_mask = 0x1fe00;
1456 break;
1457 case 0xbf: /* SST flash. */
1458 /* SST39sf10 part - 4kb sector size. */
1459 rest_addr = 0xfff;
1460 sec_mask = 0x1f000;
1461 break;
1462 case 0xda: /* Winbond flash. */
1463 /* Winbond W29EE011 part - 256 byte sector size. */
1464 rest_addr = 0x7f;
1465 sec_mask = 0x1ff80;
1466 break;
1467 case 0xc2: /* Macronix flash. */
1468 /* 64k sector size. */
1469 if (flash_id == 0x38 || flash_id == 0x4f) {
1470 rest_addr = 0xffff;
1471 sec_mask = 0x10000;
1472 break;
1473 }
1474 /* Fall through... */
1475
1476 case 0x1f: /* Atmel flash. */
1477 /* 512k sector size. */
1478 if (flash_id == 0x13) {
1479 rest_addr = 0x7fffffff;
1480 sec_mask = 0x80000000;
1481 break;
1482 }
1483 /* Fall through... */
1484
1485 case 0x01: /* AMD flash. */
1486 if (flash_id == 0x38 || flash_id == 0x40 ||
1487 flash_id == 0x4f) {
1488 /* Am29LV081 part - 64kb sector size. */
1489 /* Am29LV002BT part - 64kb sector size. */
1490 rest_addr = 0xffff;
1491 sec_mask = 0x10000;
1492 break;
1493 } else if (flash_id == 0x3e) {
1494 /*
1495 * Am29LV008b part - 64kb sector size with
1496 * 32kb,8kb,8kb,16kb sector at memory address
1497 * h0xf0000.
1498 */
1499 rest_addr = 0xffff;
1500 sec_mask = 0x10000;
1501 break;
1502 } else if (flash_id == 0x20 || flash_id == 0x6e) {
1503 /*
1504 * Am29LV010 part or AM29f010 - 16kb sector
1505 * size.
1506 */
1507 rest_addr = 0x3fff;
1508 sec_mask = 0x1c000;
1509 break;
1510 } else if (flash_id == 0x6d) {
1511 /* Am29LV001 part - 8kb sector size. */
1512 rest_addr = 0x1fff;
1513 sec_mask = 0x1e000;
1514 break;
1515 }
1516 default:
1517 /* Default to 16 kb sector size. */
1518 rest_addr = 0x3fff;
1519 sec_mask = 0x1c000;
1520 break;
1521 }
1522
1523update_flash:
1524 if (IS_QLA2322(ha) || IS_QLA6322(ha)) {
1525 if (qla2x00_erase_flash(ha, man_id, flash_id)) {
1526 rval = QLA_FUNCTION_FAILED;
1527 break;
1528 }
1529 }
1530
1531 for (addr = offset, liter = 0; liter < length; liter++,
1532 addr++) {
1533 data = buf[liter];
1534 /* Are we at the beginning of a sector? */
1535 if ((addr & rest_addr) == 0) {
1536 if (IS_QLA2322(ha) || IS_QLA6322(ha)) {
1537 if (addr >= 0x10000UL) {
1538 if (((addr >> 12) & 0xf0) &&
1539 ((man_id == 0x01 &&
1540 flash_id == 0x3e) ||
1541 (man_id == 0x20 &&
1542 flash_id == 0xd2))) {
1543 sec_number++;
1544 if (sec_number == 1) {
1545 rest_addr =
1546 0x7fff;
1547 sec_mask =
1548 0x18000;
1549 } else if (
1550 sec_number == 2 ||
1551 sec_number == 3) {
1552 rest_addr =
1553 0x1fff;
1554 sec_mask =
1555 0x1e000;
1556 } else if (
1557 sec_number == 4) {
1558 rest_addr =
1559 0x3fff;
1560 sec_mask =
1561 0x1c000;
1562 }
1563 }
1564 }
1565 } else if (addr == ha->optrom_size / 2) {
1566 WRT_REG_WORD(&reg->nvram, NVR_SELECT);
1567 RD_REG_WORD(&reg->nvram);
1568 }
1569
1570 if (flash_id == 0xda && man_id == 0xc1) {
1571 qla2x00_write_flash_byte(ha, 0x5555,
1572 0xaa);
1573 qla2x00_write_flash_byte(ha, 0x2aaa,
1574 0x55);
1575 qla2x00_write_flash_byte(ha, 0x5555,
1576 0xa0);
1577 } else if (!IS_QLA2322(ha) && !IS_QLA6322(ha)) {
1578 /* Then erase it */
1579 if (qla2x00_erase_flash_sector(ha,
1580 addr, sec_mask, man_id,
1581 flash_id)) {
1582 rval = QLA_FUNCTION_FAILED;
1583 break;
1584 }
1585 if (man_id == 0x01 && flash_id == 0x6d)
1586 sec_number++;
1587 }
1588 }
1589
1590 if (man_id == 0x01 && flash_id == 0x6d) {
1591 if (sec_number == 1 &&
1592 addr == (rest_addr - 1)) {
1593 rest_addr = 0x0fff;
1594 sec_mask = 0x1f000;
1595 } else if (sec_number == 3 && (addr & 0x7ffe)) {
1596 rest_addr = 0x3fff;
1597 sec_mask = 0x1c000;
1598 }
1599 }
1600
1601 if (qla2x00_program_flash_address(ha, addr, data,
1602 man_id, flash_id)) {
1603 rval = QLA_FUNCTION_FAILED;
1604 break;
1605 }
1606 }
1607 } while (0);
1608 qla2x00_flash_disable(ha);
1609 spin_unlock_irqrestore(&ha->hardware_lock, flags);
1610
1611 /* Resume HBA. */
1612 qla2x00_resume_hba(ha);
1613
1614 return rval;
1615}
1616
1617uint8_t *
1618qla24xx_read_optrom_data(struct scsi_qla_host *ha, uint8_t *buf,
1619 uint32_t offset, uint32_t length)
1620{
1621 /* Suspend HBA. */
1622 scsi_block_requests(ha->host);
1623 ha->isp_ops.disable_intrs(ha);
1624 set_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags);
1625
1626 /* Go with read. */
1627 qla24xx_read_flash_data(ha, (uint32_t *)buf, offset >> 2, length >> 2);
1628
1629 /* Resume HBA. */
1630 clear_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags);
1631 ha->isp_ops.enable_intrs(ha);
1632 scsi_unblock_requests(ha->host);
1633
1634 return buf;
1635}
1636
1637int
1638qla24xx_write_optrom_data(struct scsi_qla_host *ha, uint8_t *buf,
1639 uint32_t offset, uint32_t length)
1640{
1641 int rval;
1642
1643 /* Suspend HBA. */
1644 scsi_block_requests(ha->host);
1645 ha->isp_ops.disable_intrs(ha);
1646 set_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags);
1647
1648 /* Go with write. */
1649 rval = qla24xx_write_flash_data(ha, (uint32_t *)buf, offset >> 2,
1650 length >> 2);
1651
1652 /* Resume HBA -- RISC reset needed. */
1653 clear_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags);
1654 set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
1655 up(ha->dpc_wait);
1656 qla2x00_wait_for_hba_online(ha);
1657 scsi_unblock_requests(ha->host);
1658
1659 return rval;
1660}
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-06 10:34:29 -0500