1 files changed, 27 insertions, 23 deletions

diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index feba3be90cb2..56421c714bf8 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -7764,21 +7764,23 @@ lpfc_pci_resume_one_s3(struct pci_dev *pdev)
  * @phba: pointer to lpfc hba data structure.
  *
  * This routine is called to prepare the SLI3 device for PCI slot recover. It
- * aborts and stops all the on-going I/Os on the pci device.
+ * aborts all the outstanding SCSI I/Os to the pci device.
  **/
 static void
 lpfc_sli_prep_dev_for_recover(struct lpfc_hba *phba)
 {
+        struct lpfc_sli *psli = &phba->sli;
+        struct lpfc_sli_ring  *pring;
+
         lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
                         "2723 PCI channel I/O abort preparing for recovery\n");
-        /* Prepare for bringing HBA offline */
-        lpfc_offline_prep(phba);
-        /* Clear sli active flag to prevent sysfs access to HBA */
-        spin_lock_irq(&phba->hbalock);
-        phba->sli.sli_flag &= ~LPFC_SLI_ACTIVE;
-        spin_unlock_irq(&phba->hbalock);
-        /* Stop and flush all I/Os and bring HBA offline */
-        lpfc_offline(phba);
+
+        /*
+         * There may be errored I/Os through HBA, abort all I/Os on txcmplq
+         * and let the SCSI mid-layer to retry them to recover.
+         */
+        pring = &psli->ring[psli->fcp_ring];
+        lpfc_sli_abort_iocb_ring(phba, pring);
 }
 
 /**
@@ -7792,21 +7794,20 @@ lpfc_sli_prep_dev_for_recover(struct lpfc_hba *phba)
 static void
 lpfc_sli_prep_dev_for_reset(struct lpfc_hba *phba)
 {
-        struct lpfc_sli *psli = &phba->sli;
-        struct lpfc_sli_ring  *pring;
-
         lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
                         "2710 PCI channel disable preparing for reset\n");
+
+        /* Block all SCSI devices' I/Os on the host */
+        lpfc_scsi_dev_block(phba);
+
+        /* stop all timers */
+        lpfc_stop_hba_timers(phba);
+
         /* Disable interrupt and pci device */
         lpfc_sli_disable_intr(phba);
         pci_disable_device(phba->pcidev);
-        /*
-         * There may be I/Os dropped by the firmware.
-         * Error iocb (I/O) on txcmplq and let the SCSI layer
-         * retry it after re-establishing link.
-         */
-        pring = &psli->ring[psli->fcp_ring];
-        lpfc_sli_abort_iocb_ring(phba, pring);
+        /* Flush all driver's outstanding SCSI I/Os as we are to reset */
+        lpfc_sli_flush_fcp_rings(phba);
 }
 
 /**
@@ -7822,6 +7823,12 @@ lpfc_prep_dev_for_perm_failure(struct lpfc_hba *phba)
 {
         lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
                         "2711 PCI channel permanent disable for failure\n");
+        /* Block all SCSI devices' I/Os on the host */
+        lpfc_scsi_dev_block(phba);
+
+        /* stop all timers */
+        lpfc_stop_hba_timers(phba);
+
         /* Clean up all driver's outstanding SCSI I/Os */
         lpfc_sli_flush_fcp_rings(phba);
 }
@@ -7850,9 +7857,6 @@ lpfc_io_error_detected_s3(struct pci_dev *pdev, pci_channel_state_t state)
         struct Scsi_Host *shost = pci_get_drvdata(pdev);
         struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
 
-        /* Block all SCSI devices' I/Os on the host */
-        lpfc_scsi_dev_block(phba);
-
         switch (state) {
         case pci_channel_io_normal:
                 /* Non-fatal error, prepare for recovery */
@@ -7959,7 +7963,7 @@ lpfc_io_resume_s3(struct pci_dev *pdev)
         struct Scsi_Host *shost = pci_get_drvdata(pdev);
         struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
 
-        /* Bring the device online */
+        /* Bring device online, it will be no-op for non-fatal error resume */
         lpfc_online(phba);
 
         /* Clean up Advanced Error Reporting (AER) if needed */