aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/scsi/bfa/include/defs/bfa_defs_status.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/bfa/include/defs/bfa_defs_status.h')
-rw-r--r--drivers/scsi/bfa/include/defs/bfa_defs_status.h255
1 files changed, 255 insertions, 0 deletions
diff --git a/drivers/scsi/bfa/include/defs/bfa_defs_status.h b/drivers/scsi/bfa/include/defs/bfa_defs_status.h
new file mode 100644
index 000000000000..cdceaeb9f4b8
--- /dev/null
+++ b/drivers/scsi/bfa/include/defs/bfa_defs_status.h
@@ -0,0 +1,255 @@
1/*
2 * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
3 * All rights reserved
4 * www.brocade.com
5 *
6 * Linux driver for Brocade Fibre Channel Host Bus Adapter.
7 *
8 * This program is free software; you can redistribute it and/or modify it
9 * under the terms of the GNU General Public License (GPL) Version 2 as
10 * published by the Free Software Foundation
11 *
12 * This program is distributed in the hope that it will be useful, but
13 * WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
15 * General Public License for more details.
16 */
17#ifndef __BFA_DEFS_STATUS_H__
18#define __BFA_DEFS_STATUS_H__
19
20/**
21 * API status return values
22 *
23 * NOTE: The error msgs are auto generated from the comments. Only singe line
24 * comments are supported
25 */
26enum bfa_status {
27 BFA_STATUS_OK = 0, /* Success */
28 BFA_STATUS_FAILED = 1, /* Operation failed */
29 BFA_STATUS_EINVAL = 2, /* Invalid params Check input
30 * parameters */
31 BFA_STATUS_ENOMEM = 3, /* Out of resources */
32 BFA_STATUS_ENOSYS = 4, /* Function not implemented */
33 BFA_STATUS_ETIMER = 5, /* Timer expired - Retry, if
34 * persists, contact support */
35 BFA_STATUS_EPROTOCOL = 6, /* Protocol error */
36 BFA_STATUS_ENOFCPORTS = 7, /* No FC ports resources */
37 BFA_STATUS_NOFLASH = 8, /* Flash not present */
38 BFA_STATUS_BADFLASH = 9, /* Flash is corrupted or bad */
39 BFA_STATUS_SFP_UNSUPP = 10, /* Unsupported SFP - Replace SFP */
40 BFA_STATUS_UNKNOWN_VFID = 11, /* VF_ID not found */
41 BFA_STATUS_DATACORRUPTED = 12, /* Diag returned data corrupted
42 * contact support */
43 BFA_STATUS_DEVBUSY = 13, /* Device busy - Retry operation */
44 BFA_STATUS_ABORTED = 14, /* Operation aborted */
45 BFA_STATUS_NODEV = 15, /* Dev is not present */
46 BFA_STATUS_HDMA_FAILED = 16, /* Host dma failed contact support */
47 BFA_STATUS_FLASH_BAD_LEN = 17, /* Flash bad length */
48 BFA_STATUS_UNKNOWN_LWWN = 18, /* LPORT PWWN not found */
49 BFA_STATUS_UNKNOWN_RWWN = 19, /* RPORT PWWN not found */
50 BFA_STATUS_FCPT_LS_RJT = 20, /* Got LS_RJT for FC Pass
51 * through Req */
52 BFA_STATUS_VPORT_EXISTS = 21, /* VPORT already exists */
53 BFA_STATUS_VPORT_MAX = 22, /* Reached max VPORT supported
54 * limit */
55 BFA_STATUS_UNSUPP_SPEED = 23, /* Invalid Speed Check speed
56 * setting */
57 BFA_STATUS_INVLD_DFSZ = 24, /* Invalid Max data field size */
58 BFA_STATUS_CNFG_FAILED = 25, /* Setting can not be persisted */
59 BFA_STATUS_CMD_NOTSUPP = 26, /* Command/API not supported */
60 BFA_STATUS_NO_ADAPTER = 27, /* No Brocade Adapter Found */
61 BFA_STATUS_LINKDOWN = 28, /* Link is down - Check or replace
62 * SFP/cable */
63 BFA_STATUS_FABRIC_RJT = 29, /* Reject from attached fabric */
64 BFA_STATUS_UNKNOWN_VWWN = 30, /* VPORT PWWN not found */
65 BFA_STATUS_NSLOGIN_FAILED = 31, /* Nameserver login failed */
66 BFA_STATUS_NO_RPORTS = 32, /* No remote ports found */
67 BFA_STATUS_NSQUERY_FAILED = 33, /* Nameserver query failed */
68 BFA_STATUS_PORT_OFFLINE = 34, /* Port is not online */
69 BFA_STATUS_RPORT_OFFLINE = 35, /* RPORT is not online */
70 BFA_STATUS_TGTOPEN_FAILED = 36, /* Remote SCSI target open failed */
71 BFA_STATUS_BAD_LUNS = 37, /* No valid LUNs found */
72 BFA_STATUS_IO_FAILURE = 38, /* SCSI target IO failure */
73 BFA_STATUS_NO_FABRIC = 39, /* No switched fabric present */
74 BFA_STATUS_EBADF = 40, /* Bad file descriptor */
75 BFA_STATUS_EINTR = 41, /* A signal was caught during ioctl */
76 BFA_STATUS_EIO = 42, /* I/O error */
77 BFA_STATUS_ENOTTY = 43, /* Inappropriate I/O control
78 * operation */
79 BFA_STATUS_ENXIO = 44, /* No such device or address */
80 BFA_STATUS_EFOPEN = 45, /* Failed to open file */
81 BFA_STATUS_VPORT_WWN_BP = 46, /* WWN is same as base port's WWN */
82 BFA_STATUS_PORT_NOT_DISABLED = 47, /* Port not disabled disable port
83 * first */
84 BFA_STATUS_BADFRMHDR = 48, /* Bad frame header */
85 BFA_STATUS_BADFRMSZ = 49, /* Bad frame size check and replace
86 * SFP/cable */
87 BFA_STATUS_MISSINGFRM = 50, /* Missing frame check and replace
88 * SFP/cable */
89 BFA_STATUS_LINKTIMEOUT = 51, /* Link timeout check and replace
90 * SFP/cable */
91 BFA_STATUS_NO_FCPIM_NEXUS = 52, /* No FCP Nexus exists with the
92 * rport */
93 BFA_STATUS_CHECKSUM_FAIL = 53, /* checksum failure */
94 BFA_STATUS_GZME_FAILED = 54, /* Get zone member query failed */
95 BFA_STATUS_SCSISTART_REQD = 55, /* SCSI disk require START command */
96 BFA_STATUS_IOC_FAILURE = 56, /* IOC failure - Retry, if persists
97 * contact support */
98 BFA_STATUS_INVALID_WWN = 57, /* Invalid WWN */
99 BFA_STATUS_MISMATCH = 58, /* Version mismatch */
100 BFA_STATUS_IOC_ENABLED = 59, /* IOC is already enabled */
101 BFA_STATUS_ADAPTER_ENABLED = 60, /* Adapter is not disabled disable
102 * adapter first */
103 BFA_STATUS_IOC_NON_OP = 61, /* IOC is not operational. Enable IOC
104 * and if it still fails,
105 * contact support */
106 BFA_STATUS_ADDR_MAP_FAILURE = 62, /* PCI base address not mapped
107 * in OS */
108 BFA_STATUS_SAME_NAME = 63, /* Name exists! use a different
109 * name */
110 BFA_STATUS_PENDING = 64, /* API completes asynchronously */
111 BFA_STATUS_8G_SPD = 65, /* Speed setting not valid for
112 * 8G HBA */
113 BFA_STATUS_4G_SPD = 66, /* Speed setting not valid for
114 * 4G HBA */
115 BFA_STATUS_AD_IS_ENABLE = 67, /* Adapter is already enabled */
116 BFA_STATUS_EINVAL_TOV = 68, /* Invalid path failover TOV */
117 BFA_STATUS_EINVAL_QDEPTH = 69, /* Invalid queue depth value */
118 BFA_STATUS_VERSION_FAIL = 70, /* Application/Driver version
119 * mismatch */
120 BFA_STATUS_DIAG_BUSY = 71, /* diag busy */
121 BFA_STATUS_BEACON_ON = 72, /* Port Beacon already on */
122 BFA_STATUS_BEACON_OFF = 73, /* Port Beacon already off */
123 BFA_STATUS_LBEACON_ON = 74, /* Link End-to-End Beacon already
124 * on */
125 BFA_STATUS_LBEACON_OFF = 75, /* Link End-to-End Beacon already
126 * off */
127 BFA_STATUS_PORT_NOT_INITED = 76, /* Port not initialized */
128 BFA_STATUS_RPSC_ENABLED = 77, /* Target has a valid speed */
129 BFA_STATUS_ENOFSAVE = 78, /* No saved firmware trace */
130 BFA_STATUS_BAD_FILE = 79, /* Not a valid Brocade Boot Code
131 * file */
132 BFA_STATUS_RLIM_EN = 80, /* Target rate limiting is already
133 * enabled */
134 BFA_STATUS_RLIM_DIS = 81, /* Target rate limiting is already
135 * disabled */
136 BFA_STATUS_IOC_DISABLED = 82, /* IOC is already disabled */
137 BFA_STATUS_ADAPTER_DISABLED = 83, /* Adapter is already disabled */
138 BFA_STATUS_BIOS_DISABLED = 84, /* Bios is already disabled */
139 BFA_STATUS_AUTH_ENABLED = 85, /* Authentication is already
140 * enabled */
141 BFA_STATUS_AUTH_DISABLED = 86, /* Authentication is already
142 * disabled */
143 BFA_STATUS_ERROR_TRL_ENABLED = 87, /* Target rate limiting is
144 * enabled */
145 BFA_STATUS_ERROR_QOS_ENABLED = 88, /* QoS is enabled */
146 BFA_STATUS_NO_SFP_DEV = 89, /* No SFP device check or replace SFP */
147 BFA_STATUS_MEMTEST_FAILED = 90, /* Memory test failed contact
148 * support */
149 BFA_STATUS_INVALID_DEVID = 91, /* Invalid device id provided */
150 BFA_STATUS_QOS_ENABLED = 92, /* QOS is already enabled */
151 BFA_STATUS_QOS_DISABLED = 93, /* QOS is already disabled */
152 BFA_STATUS_INCORRECT_DRV_CONFIG = 94, /* Check configuration
153 * key/value pair */
154 BFA_STATUS_REG_FAIL = 95, /* Can't read windows registry */
155 BFA_STATUS_IM_INV_CODE = 96, /* Invalid IOCTL code */
156 BFA_STATUS_IM_INV_VLAN = 97, /* Invalid VLAN ID */
157 BFA_STATUS_IM_INV_ADAPT_NAME = 98, /* Invalid adapter name */
158 BFA_STATUS_IM_LOW_RESOURCES = 99, /* Memory allocation failure in
159 * driver */
160 BFA_STATUS_IM_VLANID_IS_PVID = 100, /* Given VLAN id same as PVID */
161 BFA_STATUS_IM_VLANID_EXISTS = 101, /* Given VLAN id already exists */
162 BFA_STATUS_IM_FW_UPDATE_FAIL = 102, /* Updating firmware with new
163 * VLAN ID failed */
164 BFA_STATUS_PORTLOG_ENABLED = 103, /* Port Log is already enabled */
165 BFA_STATUS_PORTLOG_DISABLED = 104, /* Port Log is already disabled */
166 BFA_STATUS_FILE_NOT_FOUND = 105, /* Specified file could not be
167 * found */
168 BFA_STATUS_QOS_FC_ONLY = 106, /* QOS can be enabled for FC mode
169 * only */
170 BFA_STATUS_RLIM_FC_ONLY = 107, /* RATELIM can be enabled for FC mode
171 * only */
172 BFA_STATUS_CT_SPD = 108, /* Invalid speed selection for Catapult. */
173 BFA_STATUS_LEDTEST_OP = 109, /* LED test is operating */
174 BFA_STATUS_CEE_NOT_DN = 110, /* eth port is not at down state, please
175 * bring down first */
176 BFA_STATUS_10G_SPD = 111, /* Speed setting not valid for 10G HBA */
177 BFA_STATUS_IM_INV_TEAM_NAME = 112, /* Invalid team name */
178 BFA_STATUS_IM_DUP_TEAM_NAME = 113, /* Given team name already
179 * exists */
180 BFA_STATUS_IM_ADAPT_ALREADY_IN_TEAM = 114, /* Given adapter is part
181 * of another team */
182 BFA_STATUS_IM_ADAPT_HAS_VLANS = 115, /* Adapter has VLANs configured.
183 * Delete all VLANs before
184 * creating team */
185 BFA_STATUS_IM_PVID_MISMATCH = 116, /* Mismatching PVIDs configured
186 * for adapters */
187 BFA_STATUS_IM_LINK_SPEED_MISMATCH = 117, /* Mismatching link speeds
188 * configured for adapters */
189 BFA_STATUS_IM_MTU_MISMATCH = 118, /* Mismatching MTUs configured for
190 * adapters */
191 BFA_STATUS_IM_RSS_MISMATCH = 119, /* Mismatching RSS parameters
192 * configured for adapters */
193 BFA_STATUS_IM_HDS_MISMATCH = 120, /* Mismatching HDS parameters
194 * configured for adapters */
195 BFA_STATUS_IM_OFFLOAD_MISMATCH = 121, /* Mismatching offload
196 * parameters configured for
197 * adapters */
198 BFA_STATUS_IM_PORT_PARAMS = 122, /* Error setting port parameters */
199 BFA_STATUS_IM_PORT_NOT_IN_TEAM = 123, /* Port is not part of team */
200 BFA_STATUS_IM_CANNOT_REM_PRI = 124, /* Primary adapter cannot be
201 * removed. Change primary before
202 * removing */
203 BFA_STATUS_IM_MAX_PORTS_REACHED = 125, /* Exceeding maximum ports
204 * per team */
205 BFA_STATUS_IM_LAST_PORT_DELETE = 126, /* Last port in team being
206 * deleted */
207 BFA_STATUS_IM_NO_DRIVER = 127, /* IM driver is not installed */
208 BFA_STATUS_IM_MAX_VLANS_REACHED = 128, /* Exceeding maximum VLANs
209 * per port */
210 BFA_STATUS_TOMCAT_SPD_NOT_ALLOWED = 129, /* Bios speed config not
211 * allowed for CNA */
212 BFA_STATUS_NO_MINPORT_DRIVER = 130, /* Miniport driver is not
213 * loaded */
214 BFA_STATUS_CARD_TYPE_MISMATCH = 131, /* Card type mismatch */
215 BFA_STATUS_BAD_ASICBLK = 132, /* Bad ASIC block */
216 BFA_STATUS_NO_DRIVER = 133, /* Storage/Ethernet driver not loaded */
217 BFA_STATUS_INVALID_MAC = 134, /* Invalid mac address */
218 BFA_STATUS_IM_NO_VLAN = 135, /* No VLANs configured on the adapter */
219 BFA_STATUS_IM_ETH_LB_FAILED = 136, /* Ethernet loopback test failed */
220 BFA_STATUS_IM_PVID_REMOVE = 137, /* Cannot remove port vlan (PVID) */
221 BFA_STATUS_IM_PVID_EDIT = 138, /* Cannot edit port vlan (PVID) */
222 BFA_STATUS_CNA_NO_BOOT = 139, /* Boot upload not allowed for CNA */
223 BFA_STATUS_IM_PVID_NON_ZERO = 140, /* Port VLAN ID (PVID) is Set to
224 * Non-Zero Value */
225 BFA_STATUS_IM_INETCFG_LOCK_FAILED = 141, /* Acquiring Network
226 * Subsytem Lock Failed.Please
227 * try after some time */
228 BFA_STATUS_IM_GET_INETCFG_FAILED = 142, /* Acquiring Network Subsytem
229 * handle Failed. Please try
230 * after some time */
231 BFA_STATUS_IM_NOT_BOUND = 143, /* Brocade 10G Ethernet Service is not
232 * Enabled on this port */
233 BFA_STATUS_INSUFFICIENT_PERMS = 144, /* User doesn't have sufficient
234 * permissions to execute the BCU
235 * application */
236 BFA_STATUS_IM_INV_VLAN_NAME = 145, /* Invalid/Reserved Vlan name
237 * string. The name is not allowed
238 * for the normal Vlans */
239 BFA_STATUS_CMD_NOTSUPP_CNA = 146, /* Command not supported for CNA */
240 BFA_STATUS_IM_PASSTHRU_EDIT = 147, /* Can not edit passthru vlan id */
241 BFA_STATUS_IM_BIND_FAILED = 148, /*! < IM Driver bind operation
242 * failed */
243 BFA_STATUS_IM_UNBIND_FAILED = 149, /* ! < IM Driver unbind operation
244 * failed */
245 BFA_STATUS_MAX_VAL /* Unknown error code */
246};
247#define bfa_status_t enum bfa_status
248
249enum bfa_eproto_status {
250 BFA_EPROTO_BAD_ACCEPT = 0,
251 BFA_EPROTO_UNKNOWN_RSP = 1
252};
253#define bfa_eproto_status_t enum bfa_eproto_status
254
255#endif /* __BFA_DEFS_STATUS_H__ */
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-01 08:39:28 -0400