1 files changed, 7335 insertions, 0 deletions

diff --git a/drivers/net/ksz884x.c b/drivers/net/ksz884x.c
new file mode 100644
index 000000000000..6f187c7e61fa
--- /dev/null
+++ b/drivers/net/ksz884x.c
@@ -0,0 +1,7335 @@
+/**
+ * drivers/net/ksx884x.c - Micrel KSZ8841/2 PCI Ethernet driver
+ *
+ * Copyright (c) 2009-2010 Micrel, Inc.
+ *      Tristram Ha <Tristram.Ha@micrel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/ioport.h>
+#include <linux/pci.h>
+#include <linux/proc_fs.h>
+#include <linux/mii.h>
+#include <linux/platform_device.h>
+#include <linux/ethtool.h>
+#include <linux/etherdevice.h>
+#include <linux/in.h>
+#include <linux/ip.h>
+#include <linux/if_vlan.h>
+#include <linux/crc32.h>
+#include <linux/sched.h>
+
+
+/* DMA Registers */
+
+#define KS_DMA_TX_CTRL                  0x0000
+#define DMA_TX_ENABLE                   0x00000001
+#define DMA_TX_CRC_ENABLE               0x00000002
+#define DMA_TX_PAD_ENABLE               0x00000004
+#define DMA_TX_LOOPBACK                 0x00000100
+#define DMA_TX_FLOW_ENABLE              0x00000200
+#define DMA_TX_CSUM_IP                  0x00010000
+#define DMA_TX_CSUM_TCP                 0x00020000
+#define DMA_TX_CSUM_UDP                 0x00040000
+#define DMA_TX_BURST_SIZE               0x3F000000
+
+#define KS_DMA_RX_CTRL                  0x0004
+#define DMA_RX_ENABLE                   0x00000001
+#define KS884X_DMA_RX_MULTICAST         0x00000002
+#define DMA_RX_PROMISCUOUS              0x00000004
+#define DMA_RX_ERROR                    0x00000008
+#define DMA_RX_UNICAST                  0x00000010
+#define DMA_RX_ALL_MULTICAST            0x00000020
+#define DMA_RX_BROADCAST                0x00000040
+#define DMA_RX_FLOW_ENABLE              0x00000200
+#define DMA_RX_CSUM_IP                  0x00010000
+#define DMA_RX_CSUM_TCP                 0x00020000
+#define DMA_RX_CSUM_UDP                 0x00040000
+#define DMA_RX_BURST_SIZE               0x3F000000
+
+#define DMA_BURST_SHIFT                 24
+#define DMA_BURST_DEFAULT               8
+
+#define KS_DMA_TX_START                 0x0008
+#define KS_DMA_RX_START                 0x000C
+#define DMA_START                       0x00000001
+
+#define KS_DMA_TX_ADDR                  0x0010
+#define KS_DMA_RX_ADDR                  0x0014
+
+#define DMA_ADDR_LIST_MASK              0xFFFFFFFC
+#define DMA_ADDR_LIST_SHIFT             2
+
+/* MTR0 */
+#define KS884X_MULTICAST_0_OFFSET       0x0020
+#define KS884X_MULTICAST_1_OFFSET       0x0021
+#define KS884X_MULTICAST_2_OFFSET       0x0022
+#define KS884x_MULTICAST_3_OFFSET       0x0023
+/* MTR1 */
+#define KS884X_MULTICAST_4_OFFSET       0x0024
+#define KS884X_MULTICAST_5_OFFSET       0x0025
+#define KS884X_MULTICAST_6_OFFSET       0x0026
+#define KS884X_MULTICAST_7_OFFSET       0x0027
+
+/* Interrupt Registers */
+
+/* INTEN */
+#define KS884X_INTERRUPTS_ENABLE        0x0028
+/* INTST */
+#define KS884X_INTERRUPTS_STATUS        0x002C
+
+#define KS884X_INT_RX_STOPPED           0x02000000
+#define KS884X_INT_TX_STOPPED           0x04000000
+#define KS884X_INT_RX_OVERRUN           0x08000000
+#define KS884X_INT_TX_EMPTY             0x10000000
+#define KS884X_INT_RX                   0x20000000
+#define KS884X_INT_TX                   0x40000000
+#define KS884X_INT_PHY                  0x80000000
+
+#define KS884X_INT_RX_MASK              \
+        (KS884X_INT_RX | KS884X_INT_RX_OVERRUN)
+#define KS884X_INT_TX_MASK              \
+        (KS884X_INT_TX | KS884X_INT_TX_EMPTY)
+#define KS884X_INT_MASK (KS884X_INT_RX | KS884X_INT_TX | KS884X_INT_PHY)
+
+/* MAC Additional Station Address */
+
+/* MAAL0 */
+#define KS_ADD_ADDR_0_LO                0x0080
+/* MAAH0 */
+#define KS_ADD_ADDR_0_HI                0x0084
+/* MAAL1 */
+#define KS_ADD_ADDR_1_LO                0x0088
+/* MAAH1 */
+#define KS_ADD_ADDR_1_HI                0x008C
+/* MAAL2 */
+#define KS_ADD_ADDR_2_LO                0x0090
+/* MAAH2 */
+#define KS_ADD_ADDR_2_HI                0x0094
+/* MAAL3 */
+#define KS_ADD_ADDR_3_LO                0x0098
+/* MAAH3 */
+#define KS_ADD_ADDR_3_HI                0x009C
+/* MAAL4 */
+#define KS_ADD_ADDR_4_LO                0x00A0
+/* MAAH4 */
+#define KS_ADD_ADDR_4_HI                0x00A4
+/* MAAL5 */
+#define KS_ADD_ADDR_5_LO                0x00A8
+/* MAAH5 */
+#define KS_ADD_ADDR_5_HI                0x00AC
+/* MAAL6 */
+#define KS_ADD_ADDR_6_LO                0x00B0
+/* MAAH6 */
+#define KS_ADD_ADDR_6_HI                0x00B4
+/* MAAL7 */
+#define KS_ADD_ADDR_7_LO                0x00B8
+/* MAAH7 */
+#define KS_ADD_ADDR_7_HI                0x00BC
+/* MAAL8 */
+#define KS_ADD_ADDR_8_LO                0x00C0
+/* MAAH8 */
+#define KS_ADD_ADDR_8_HI                0x00C4
+/* MAAL9 */
+#define KS_ADD_ADDR_9_LO                0x00C8
+/* MAAH9 */
+#define KS_ADD_ADDR_9_HI                0x00CC
+/* MAAL10 */
+#define KS_ADD_ADDR_A_LO                0x00D0
+/* MAAH10 */
+#define KS_ADD_ADDR_A_HI                0x00D4
+/* MAAL11 */
+#define KS_ADD_ADDR_B_LO                0x00D8
+/* MAAH11 */
+#define KS_ADD_ADDR_B_HI                0x00DC
+/* MAAL12 */
+#define KS_ADD_ADDR_C_LO                0x00E0
+/* MAAH12 */
+#define KS_ADD_ADDR_C_HI                0x00E4
+/* MAAL13 */
+#define KS_ADD_ADDR_D_LO                0x00E8
+/* MAAH13 */
+#define KS_ADD_ADDR_D_HI                0x00EC
+/* MAAL14 */
+#define KS_ADD_ADDR_E_LO                0x00F0
+/* MAAH14 */
+#define KS_ADD_ADDR_E_HI                0x00F4
+/* MAAL15 */
+#define KS_ADD_ADDR_F_LO                0x00F8
+/* MAAH15 */
+#define KS_ADD_ADDR_F_HI                0x00FC
+
+#define ADD_ADDR_HI_MASK                0x0000FFFF
+#define ADD_ADDR_ENABLE                 0x80000000
+#define ADD_ADDR_INCR                   8
+
+/* Miscellaneous Registers */
+
+/* MARL */
+#define KS884X_ADDR_0_OFFSET            0x0200
+#define KS884X_ADDR_1_OFFSET            0x0201
+/* MARM */
+#define KS884X_ADDR_2_OFFSET            0x0202
+#define KS884X_ADDR_3_OFFSET            0x0203
+/* MARH */
+#define KS884X_ADDR_4_OFFSET            0x0204
+#define KS884X_ADDR_5_OFFSET            0x0205
+
+/* OBCR */
+#define KS884X_BUS_CTRL_OFFSET          0x0210
+
+#define BUS_SPEED_125_MHZ               0x0000
+#define BUS_SPEED_62_5_MHZ              0x0001
+#define BUS_SPEED_41_66_MHZ             0x0002
+#define BUS_SPEED_25_MHZ                0x0003
+
+/* EEPCR */
+#define KS884X_EEPROM_CTRL_OFFSET       0x0212
+
+#define EEPROM_CHIP_SELECT              0x0001
+#define EEPROM_SERIAL_CLOCK             0x0002
+#define EEPROM_DATA_OUT                 0x0004
+#define EEPROM_DATA_IN                  0x0008
+#define EEPROM_ACCESS_ENABLE            0x0010
+
+/* MBIR */
+#define KS884X_MEM_INFO_OFFSET          0x0214
+
+#define RX_MEM_TEST_FAILED              0x0008
+#define RX_MEM_TEST_FINISHED            0x0010
+#define TX_MEM_TEST_FAILED              0x0800
+#define TX_MEM_TEST_FINISHED            0x1000
+
+/* GCR */
+#define KS884X_GLOBAL_CTRL_OFFSET       0x0216
+#define GLOBAL_SOFTWARE_RESET           0x0001
+
+#define KS8841_POWER_MANAGE_OFFSET      0x0218
+
+/* WFCR */
+#define KS8841_WOL_CTRL_OFFSET          0x021A
+#define KS8841_WOL_MAGIC_ENABLE         0x0080
+#define KS8841_WOL_FRAME3_ENABLE        0x0008
+#define KS8841_WOL_FRAME2_ENABLE        0x0004
+#define KS8841_WOL_FRAME1_ENABLE        0x0002
+#define KS8841_WOL_FRAME0_ENABLE        0x0001
+
+/* WF0 */
+#define KS8841_WOL_FRAME_CRC_OFFSET     0x0220
+#define KS8841_WOL_FRAME_BYTE0_OFFSET   0x0224
+#define KS8841_WOL_FRAME_BYTE2_OFFSET   0x0228
+
+/* IACR */
+#define KS884X_IACR_P                   0x04A0
+#define KS884X_IACR_OFFSET              KS884X_IACR_P
+
+/* IADR1 */
+#define KS884X_IADR1_P                  0x04A2
+#define KS884X_IADR2_P                  0x04A4
+#define KS884X_IADR3_P                  0x04A6
+#define KS884X_IADR4_P                  0x04A8
+#define KS884X_IADR5_P                  0x04AA
+
+#define KS884X_ACC_CTRL_SEL_OFFSET      KS884X_IACR_P
+#define KS884X_ACC_CTRL_INDEX_OFFSET    (KS884X_ACC_CTRL_SEL_OFFSET + 1)
+
+#define KS884X_ACC_DATA_0_OFFSET        KS884X_IADR4_P
+#define KS884X_ACC_DATA_1_OFFSET        (KS884X_ACC_DATA_0_OFFSET + 1)
+#define KS884X_ACC_DATA_2_OFFSET        KS884X_IADR5_P
+#define KS884X_ACC_DATA_3_OFFSET        (KS884X_ACC_DATA_2_OFFSET + 1)
+#define KS884X_ACC_DATA_4_OFFSET        KS884X_IADR2_P
+#define KS884X_ACC_DATA_5_OFFSET        (KS884X_ACC_DATA_4_OFFSET + 1)
+#define KS884X_ACC_DATA_6_OFFSET        KS884X_IADR3_P
+#define KS884X_ACC_DATA_7_OFFSET        (KS884X_ACC_DATA_6_OFFSET + 1)
+#define KS884X_ACC_DATA_8_OFFSET        KS884X_IADR1_P
+
+/* P1MBCR */
+#define KS884X_P1MBCR_P                 0x04D0
+#define KS884X_P1MBSR_P                 0x04D2
+#define KS884X_PHY1ILR_P                0x04D4
+#define KS884X_PHY1IHR_P                0x04D6
+#define KS884X_P1ANAR_P                 0x04D8
+#define KS884X_P1ANLPR_P                0x04DA
+
+/* P2MBCR */
+#define KS884X_P2MBCR_P                 0x04E0
+#define KS884X_P2MBSR_P                 0x04E2
+#define KS884X_PHY2ILR_P                0x04E4
+#define KS884X_PHY2IHR_P                0x04E6
+#define KS884X_P2ANAR_P                 0x04E8
+#define KS884X_P2ANLPR_P                0x04EA
+
+#define KS884X_PHY_1_CTRL_OFFSET        KS884X_P1MBCR_P
+#define PHY_CTRL_INTERVAL               (KS884X_P2MBCR_P - KS884X_P1MBCR_P)
+
+#define KS884X_PHY_CTRL_OFFSET          0x00
+
+/* Mode Control Register */
+#define PHY_REG_CTRL                    0
+
+#define PHY_RESET                       0x8000
+#define PHY_LOOPBACK                    0x4000
+#define PHY_SPEED_100MBIT               0x2000
+#define PHY_AUTO_NEG_ENABLE             0x1000
+#define PHY_POWER_DOWN                  0x0800
+#define PHY_MII_DISABLE                 0x0400
+#define PHY_AUTO_NEG_RESTART            0x0200
+#define PHY_FULL_DUPLEX                 0x0100
+#define PHY_COLLISION_TEST              0x0080
+#define PHY_HP_MDIX                     0x0020
+#define PHY_FORCE_MDIX                  0x0010
+#define PHY_AUTO_MDIX_DISABLE           0x0008
+#define PHY_REMOTE_FAULT_DISABLE        0x0004
+#define PHY_TRANSMIT_DISABLE            0x0002
+#define PHY_LED_DISABLE                 0x0001
+
+#define KS884X_PHY_STATUS_OFFSET        0x02
+
+/* Mode Status Register */
+#define PHY_REG_STATUS                  1
+
+#define PHY_100BT4_CAPABLE              0x8000
+#define PHY_100BTX_FD_CAPABLE           0x4000
+#define PHY_100BTX_CAPABLE              0x2000
+#define PHY_10BT_FD_CAPABLE             0x1000
+#define PHY_10BT_CAPABLE                0x0800
+#define PHY_MII_SUPPRESS_CAPABLE        0x0040
+#define PHY_AUTO_NEG_ACKNOWLEDGE        0x0020
+#define PHY_REMOTE_FAULT                0x0010
+#define PHY_AUTO_NEG_CAPABLE            0x0008
+#define PHY_LINK_STATUS                 0x0004
+#define PHY_JABBER_DETECT               0x0002
+#define PHY_EXTENDED_CAPABILITY         0x0001
+
+#define KS884X_PHY_ID_1_OFFSET          0x04
+#define KS884X_PHY_ID_2_OFFSET          0x06
+
+/* PHY Identifier Registers */
+#define PHY_REG_ID_1                    2
+#define PHY_REG_ID_2                    3
+
+#define KS884X_PHY_AUTO_NEG_OFFSET      0x08
+
+/* Auto-Negotiation Advertisement Register */
+#define PHY_REG_AUTO_NEGOTIATION        4
+
+#define PHY_AUTO_NEG_NEXT_PAGE          0x8000
+#define PHY_AUTO_NEG_REMOTE_FAULT       0x2000
+/* Not supported. */
+#define PHY_AUTO_NEG_ASYM_PAUSE         0x0800
+#define PHY_AUTO_NEG_SYM_PAUSE          0x0400
+#define PHY_AUTO_NEG_100BT4             0x0200
+#define PHY_AUTO_NEG_100BTX_FD          0x0100
+#define PHY_AUTO_NEG_100BTX             0x0080
+#define PHY_AUTO_NEG_10BT_FD            0x0040
+#define PHY_AUTO_NEG_10BT               0x0020
+#define PHY_AUTO_NEG_SELECTOR           0x001F
+#define PHY_AUTO_NEG_802_3              0x0001
+
+#define PHY_AUTO_NEG_PAUSE  (PHY_AUTO_NEG_SYM_PAUSE | PHY_AUTO_NEG_ASYM_PAUSE)
+
+#define KS884X_PHY_REMOTE_CAP_OFFSET    0x0A
+
+/* Auto-Negotiation Link Partner Ability Register */
+#define PHY_REG_REMOTE_CAPABILITY       5
+
+#define PHY_REMOTE_NEXT_PAGE            0x8000
+#define PHY_REMOTE_ACKNOWLEDGE          0x4000
+#define PHY_REMOTE_REMOTE_FAULT         0x2000
+#define PHY_REMOTE_SYM_PAUSE            0x0400
+#define PHY_REMOTE_100BTX_FD            0x0100
+#define PHY_REMOTE_100BTX               0x0080
+#define PHY_REMOTE_10BT_FD              0x0040
+#define PHY_REMOTE_10BT                 0x0020
+
+/* P1VCT */
+#define KS884X_P1VCT_P                  0x04F0
+#define KS884X_P1PHYCTRL_P              0x04F2
+
+/* P2VCT */
+#define KS884X_P2VCT_P                  0x04F4
+#define KS884X_P2PHYCTRL_P              0x04F6
+
+#define KS884X_PHY_SPECIAL_OFFSET       KS884X_P1VCT_P
+#define PHY_SPECIAL_INTERVAL            (KS884X_P2VCT_P - KS884X_P1VCT_P)
+
+#define KS884X_PHY_LINK_MD_OFFSET       0x00
+
+#define PHY_START_CABLE_DIAG            0x8000
+#define PHY_CABLE_DIAG_RESULT           0x6000
+#define PHY_CABLE_STAT_NORMAL           0x0000
+#define PHY_CABLE_STAT_OPEN             0x2000
+#define PHY_CABLE_STAT_SHORT            0x4000
+#define PHY_CABLE_STAT_FAILED           0x6000
+#define PHY_CABLE_10M_SHORT             0x1000
+#define PHY_CABLE_FAULT_COUNTER         0x01FF
+
+#define KS884X_PHY_PHY_CTRL_OFFSET      0x02
+
+#define PHY_STAT_REVERSED_POLARITY      0x0020
+#define PHY_STAT_MDIX                   0x0010
+#define PHY_FORCE_LINK                  0x0008
+#define PHY_POWER_SAVING_DISABLE        0x0004
+#define PHY_REMOTE_LOOPBACK             0x0002
+
+/* SIDER */
+#define KS884X_SIDER_P                  0x0400
+#define KS884X_CHIP_ID_OFFSET           KS884X_SIDER_P
+#define KS884X_FAMILY_ID_OFFSET         (KS884X_CHIP_ID_OFFSET + 1)
+
+#define REG_FAMILY_ID                   0x88
+
+#define REG_CHIP_ID_41                  0x8810
+#define REG_CHIP_ID_42                  0x8800
+
+#define KS884X_CHIP_ID_MASK_41          0xFF10
+#define KS884X_CHIP_ID_MASK             0xFFF0
+#define KS884X_CHIP_ID_SHIFT            4
+#define KS884X_REVISION_MASK            0x000E
+#define KS884X_REVISION_SHIFT           1
+#define KS8842_START                    0x0001
+
+#define CHIP_IP_41_M                    0x8810
+#define CHIP_IP_42_M                    0x8800
+#define CHIP_IP_61_M                    0x8890
+#define CHIP_IP_62_M                    0x8880
+
+#define CHIP_IP_41_P                    0x8850
+#define CHIP_IP_42_P                    0x8840
+#define CHIP_IP_61_P                    0x88D0
+#define CHIP_IP_62_P                    0x88C0
+
+/* SGCR1 */
+#define KS8842_SGCR1_P                  0x0402
+#define KS8842_SWITCH_CTRL_1_OFFSET     KS8842_SGCR1_P
+
+#define SWITCH_PASS_ALL                 0x8000
+#define SWITCH_TX_FLOW_CTRL             0x2000
+#define SWITCH_RX_FLOW_CTRL             0x1000
+#define SWITCH_CHECK_LENGTH             0x0800
+#define SWITCH_AGING_ENABLE             0x0400
+#define SWITCH_FAST_AGING               0x0200
+#define SWITCH_AGGR_BACKOFF             0x0100
+#define SWITCH_PASS_PAUSE               0x0008
+#define SWITCH_LINK_AUTO_AGING          0x0001
+
+/* SGCR2 */
+#define KS8842_SGCR2_P                  0x0404
+#define KS8842_SWITCH_CTRL_2_OFFSET     KS8842_SGCR2_P
+
+#define SWITCH_VLAN_ENABLE              0x8000
+#define SWITCH_IGMP_SNOOP               0x4000
+#define IPV6_MLD_SNOOP_ENABLE           0x2000
+#define IPV6_MLD_SNOOP_OPTION           0x1000
+#define PRIORITY_SCHEME_SELECT          0x0800
+#define SWITCH_MIRROR_RX_TX             0x0100
+#define UNICAST_VLAN_BOUNDARY           0x0080
+#define MULTICAST_STORM_DISABLE         0x0040
+#define SWITCH_BACK_PRESSURE            0x0020
+#define FAIR_FLOW_CTRL                  0x0010
+#define NO_EXC_COLLISION_DROP           0x0008
+#define SWITCH_HUGE_PACKET              0x0004
+#define SWITCH_LEGAL_PACKET             0x0002
+#define SWITCH_BUF_RESERVE              0x0001
+
+/* SGCR3 */
+#define KS8842_SGCR3_P                  0x0406
+#define KS8842_SWITCH_CTRL_3_OFFSET     KS8842_SGCR3_P
+
+#define BROADCAST_STORM_RATE_LO         0xFF00
+#define SWITCH_REPEATER                 0x0080
+#define SWITCH_HALF_DUPLEX              0x0040
+#define SWITCH_FLOW_CTRL                0x0020
+#define SWITCH_10_MBIT                  0x0010
+#define SWITCH_REPLACE_NULL_VID         0x0008
+#define BROADCAST_STORM_RATE_HI         0x0007
+
+#define BROADCAST_STORM_RATE            0x07FF
+
+/* SGCR4 */
+#define KS8842_SGCR4_P                  0x0408
+
+/* SGCR5 */
+#define KS8842_SGCR5_P                  0x040A
+#define KS8842_SWITCH_CTRL_5_OFFSET     KS8842_SGCR5_P
+
+#define LED_MODE                        0x8200
+#define LED_SPEED_DUPLEX_ACT            0x0000
+#define LED_SPEED_DUPLEX_LINK_ACT       0x8000
+#define LED_DUPLEX_10_100               0x0200
+
+/* SGCR6 */
+#define KS8842_SGCR6_P                  0x0410
+#define KS8842_SWITCH_CTRL_6_OFFSET     KS8842_SGCR6_P
+
+#define KS8842_PRIORITY_MASK            3
+#define KS8842_PRIORITY_SHIFT           2
+
+/* SGCR7 */
+#define KS8842_SGCR7_P                  0x0412
+#define KS8842_SWITCH_CTRL_7_OFFSET     KS8842_SGCR7_P
+
+#define SWITCH_UNK_DEF_PORT_ENABLE      0x0008
+#define SWITCH_UNK_DEF_PORT_3           0x0004
+#define SWITCH_UNK_DEF_PORT_2           0x0002
+#define SWITCH_UNK_DEF_PORT_1           0x0001
+
+/* MACAR1 */
+#define KS8842_MACAR1_P                 0x0470
+#define KS8842_MACAR2_P                 0x0472
+#define KS8842_MACAR3_P                 0x0474
+#define KS8842_MAC_ADDR_1_OFFSET        KS8842_MACAR1_P
+#define KS8842_MAC_ADDR_0_OFFSET        (KS8842_MAC_ADDR_1_OFFSET + 1)
+#define KS8842_MAC_ADDR_3_OFFSET        KS8842_MACAR2_P
+#define KS8842_MAC_ADDR_2_OFFSET        (KS8842_MAC_ADDR_3_OFFSET + 1)
+#define KS8842_MAC_ADDR_5_OFFSET        KS8842_MACAR3_P
+#define KS8842_MAC_ADDR_4_OFFSET        (KS8842_MAC_ADDR_5_OFFSET + 1)
+
+/* TOSR1 */
+#define KS8842_TOSR1_P                  0x0480
+#define KS8842_TOSR2_P                  0x0482
+#define KS8842_TOSR3_P                  0x0484
+#define KS8842_TOSR4_P                  0x0486
+#define KS8842_TOSR5_P                  0x0488
+#define KS8842_TOSR6_P                  0x048A
+#define KS8842_TOSR7_P                  0x0490
+#define KS8842_TOSR8_P                  0x0492
+#define KS8842_TOS_1_OFFSET             KS8842_TOSR1_P
+#define KS8842_TOS_2_OFFSET             KS8842_TOSR2_P
+#define KS8842_TOS_3_OFFSET             KS8842_TOSR3_P
+#define KS8842_TOS_4_OFFSET             KS8842_TOSR4_P
+#define KS8842_TOS_5_OFFSET             KS8842_TOSR5_P
+#define KS8842_TOS_6_OFFSET             KS8842_TOSR6_P
+
+#define KS8842_TOS_7_OFFSET             KS8842_TOSR7_P
+#define KS8842_TOS_8_OFFSET             KS8842_TOSR8_P
+
+/* P1CR1 */
+#define KS8842_P1CR1_P                  0x0500
+#define KS8842_P1CR2_P                  0x0502
+#define KS8842_P1VIDR_P                 0x0504
+#define KS8842_P1CR3_P                  0x0506
+#define KS8842_P1IRCR_P                 0x0508
+#define KS8842_P1ERCR_P                 0x050A
+#define KS884X_P1SCSLMD_P               0x0510
+#define KS884X_P1CR4_P                  0x0512
+#define KS884X_P1SR_P                   0x0514
+
+/* P2CR1 */
+#define KS8842_P2CR1_P                  0x0520
+#define KS8842_P2CR2_P                  0x0522
+#define KS8842_P2VIDR_P                 0x0524
+#define KS8842_P2CR3_P                  0x0526
+#define KS8842_P2IRCR_P                 0x0528
+#define KS8842_P2ERCR_P                 0x052A
+#define KS884X_P2SCSLMD_P               0x0530
+#define KS884X_P2CR4_P                  0x0532
+#define KS884X_P2SR_P                   0x0534
+
+/* P3CR1 */
+#define KS8842_P3CR1_P                  0x0540
+#define KS8842_P3CR2_P                  0x0542
+#define KS8842_P3VIDR_P                 0x0544
+#define KS8842_P3CR3_P                  0x0546
+#define KS8842_P3IRCR_P                 0x0548
+#define KS8842_P3ERCR_P                 0x054A
+
+#define KS8842_PORT_1_CTRL_1            KS8842_P1CR1_P
+#define KS8842_PORT_2_CTRL_1            KS8842_P2CR1_P
+#define KS8842_PORT_3_CTRL_1            KS8842_P3CR1_P
+
+#define PORT_CTRL_ADDR(port, addr)              \
+        (addr = KS8842_PORT_1_CTRL_1 + (port) * \
+                (KS8842_PORT_2_CTRL_1 - KS8842_PORT_1_CTRL_1))
+
+#define KS8842_PORT_CTRL_1_OFFSET       0x00
+
+#define PORT_BROADCAST_STORM            0x0080
+#define PORT_DIFFSERV_ENABLE            0x0040
+#define PORT_802_1P_ENABLE              0x0020
+#define PORT_BASED_PRIORITY_MASK        0x0018
+#define PORT_BASED_PRIORITY_BASE        0x0003
+#define PORT_BASED_PRIORITY_SHIFT       3
+#define PORT_BASED_PRIORITY_0           0x0000
+#define PORT_BASED_PRIORITY_1           0x0008
+#define PORT_BASED_PRIORITY_2           0x0010
+#define PORT_BASED_PRIORITY_3           0x0018
+#define PORT_INSERT_TAG                 0x0004
+#define PORT_REMOVE_TAG                 0x0002
+#define PORT_PRIO_QUEUE_ENABLE          0x0001
+
+#define KS8842_PORT_CTRL_2_OFFSET       0x02
+
+#define PORT_INGRESS_VLAN_FILTER        0x4000
+#define PORT_DISCARD_NON_VID            0x2000
+#define PORT_FORCE_FLOW_CTRL            0x1000
+#define PORT_BACK_PRESSURE              0x0800
+#define PORT_TX_ENABLE                  0x0400
+#define PORT_RX_ENABLE                  0x0200
+#define PORT_LEARN_DISABLE              0x0100
+#define PORT_MIRROR_SNIFFER             0x0080
+#define PORT_MIRROR_RX                  0x0040
+#define PORT_MIRROR_TX                  0x0020
+#define PORT_USER_PRIORITY_CEILING      0x0008
+#define PORT_VLAN_MEMBERSHIP            0x0007
+
+#define KS8842_PORT_CTRL_VID_OFFSET     0x04
+
+#define PORT_DEFAULT_VID                0x0001
+
+#define KS8842_PORT_CTRL_3_OFFSET       0x06
+
+#define PORT_INGRESS_LIMIT_MODE         0x000C
+#define PORT_INGRESS_ALL                0x0000
+#define PORT_INGRESS_UNICAST            0x0004
+#define PORT_INGRESS_MULTICAST          0x0008
+#define PORT_INGRESS_BROADCAST          0x000C
+#define PORT_COUNT_IFG                  0x0002
+#define PORT_COUNT_PREAMBLE             0x0001
+
+#define KS8842_PORT_IN_RATE_OFFSET      0x08
+#define KS8842_PORT_OUT_RATE_OFFSET     0x0A
+
+#define PORT_PRIORITY_RATE              0x0F
+#define PORT_PRIORITY_RATE_SHIFT        4
+
+#define KS884X_PORT_LINK_MD             0x10
+
+#define PORT_CABLE_10M_SHORT            0x8000
+#define PORT_CABLE_DIAG_RESULT          0x6000
+#define PORT_CABLE_STAT_NORMAL          0x0000
+#define PORT_CABLE_STAT_OPEN            0x2000
+#define PORT_CABLE_STAT_SHORT           0x4000
+#define PORT_CABLE_STAT_FAILED          0x6000
+#define PORT_START_CABLE_DIAG           0x1000
+#define PORT_FORCE_LINK                 0x0800
+#define PORT_POWER_SAVING_DISABLE       0x0400
+#define PORT_PHY_REMOTE_LOOPBACK        0x0200
+#define PORT_CABLE_FAULT_COUNTER        0x01FF
+
+#define KS884X_PORT_CTRL_4_OFFSET       0x12
+
+#define PORT_LED_OFF                    0x8000
+#define PORT_TX_DISABLE                 0x4000
+#define PORT_AUTO_NEG_RESTART           0x2000
+#define PORT_REMOTE_FAULT_DISABLE       0x1000
+#define PORT_POWER_DOWN                 0x0800
+#define PORT_AUTO_MDIX_DISABLE          0x0400
+#define PORT_FORCE_MDIX                 0x0200
+#define PORT_LOOPBACK                   0x0100
+#define PORT_AUTO_NEG_ENABLE            0x0080
+#define PORT_FORCE_100_MBIT             0x0040
+#define PORT_FORCE_FULL_DUPLEX          0x0020
+#define PORT_AUTO_NEG_SYM_PAUSE         0x0010
+#define PORT_AUTO_NEG_100BTX_FD         0x0008
+#define PORT_AUTO_NEG_100BTX            0x0004
+#define PORT_AUTO_NEG_10BT_FD           0x0002
+#define PORT_AUTO_NEG_10BT              0x0001
+
+#define KS884X_PORT_STATUS_OFFSET       0x14
+
+#define PORT_HP_MDIX                    0x8000
+#define PORT_REVERSED_POLARITY          0x2000
+#define PORT_RX_FLOW_CTRL               0x0800
+#define PORT_TX_FLOW_CTRL               0x1000
+#define PORT_STATUS_SPEED_100MBIT       0x0400
+#define PORT_STATUS_FULL_DUPLEX         0x0200
+#define PORT_REMOTE_FAULT               0x0100
+#define PORT_MDIX_STATUS                0x0080
+#define PORT_AUTO_NEG_COMPLETE          0x0040
+#define PORT_STATUS_LINK_GOOD           0x0020
+#define PORT_REMOTE_SYM_PAUSE           0x0010
+#define PORT_REMOTE_100BTX_FD           0x0008
+#define PORT_REMOTE_100BTX              0x0004
+#define PORT_REMOTE_10BT_FD             0x0002
+#define PORT_REMOTE_10BT                0x0001
+
+/*
+#define STATIC_MAC_TABLE_ADDR           00-0000FFFF-FFFFFFFF
+#define STATIC_MAC_TABLE_FWD_PORTS      00-00070000-00000000
+#define STATIC_MAC_TABLE_VALID          00-00080000-00000000
+#define STATIC_MAC_TABLE_OVERRIDE       00-00100000-00000000
+#define STATIC_MAC_TABLE_USE_FID        00-00200000-00000000
+#define STATIC_MAC_TABLE_FID            00-03C00000-00000000
+*/
+
+#define STATIC_MAC_TABLE_ADDR           0x0000FFFF
+#define STATIC_MAC_TABLE_FWD_PORTS      0x00070000
+#define STATIC_MAC_TABLE_VALID          0x00080000
+#define STATIC_MAC_TABLE_OVERRIDE       0x00100000
+#define STATIC_MAC_TABLE_USE_FID        0x00200000
+#define STATIC_MAC_TABLE_FID            0x03C00000
+
+#define STATIC_MAC_FWD_PORTS_SHIFT      16
+#define STATIC_MAC_FID_SHIFT            22
+
+/*
+#define VLAN_TABLE_VID                  00-00000000-00000FFF
+#define VLAN_TABLE_FID                  00-00000000-0000F000
+#define VLAN_TABLE_MEMBERSHIP           00-00000000-00070000
+#define VLAN_TABLE_VALID                00-00000000-00080000
+*/
+
+#define VLAN_TABLE_VID                  0x00000FFF
+#define VLAN_TABLE_FID                  0x0000F000
+#define VLAN_TABLE_MEMBERSHIP           0x00070000
+#define VLAN_TABLE_VALID                0x00080000
+
+#define VLAN_TABLE_FID_SHIFT            12
+#define VLAN_TABLE_MEMBERSHIP_SHIFT     16
+
+/*
+#define DYNAMIC_MAC_TABLE_ADDR          00-0000FFFF-FFFFFFFF
+#define DYNAMIC_MAC_TABLE_FID           00-000F0000-00000000
+#define DYNAMIC_MAC_TABLE_SRC_PORT      00-00300000-00000000
+#define DYNAMIC_MAC_TABLE_TIMESTAMP     00-00C00000-00000000
+#define DYNAMIC_MAC_TABLE_ENTRIES       03-FF000000-00000000
+#define DYNAMIC_MAC_TABLE_MAC_EMPTY     04-00000000-00000000
+#define DYNAMIC_MAC_TABLE_RESERVED      78-00000000-00000000
+#define DYNAMIC_MAC_TABLE_NOT_READY     80-00000000-00000000
+*/
+
+#define DYNAMIC_MAC_TABLE_ADDR          0x0000FFFF
+#define DYNAMIC_MAC_TABLE_FID           0x000F0000
+#define DYNAMIC_MAC_TABLE_SRC_PORT      0x00300000
+#define DYNAMIC_MAC_TABLE_TIMESTAMP     0x00C00000
+#define DYNAMIC_MAC_TABLE_ENTRIES       0xFF000000
+
+#define DYNAMIC_MAC_TABLE_ENTRIES_H     0x03
+#define DYNAMIC_MAC_TABLE_MAC_EMPTY     0x04
+#define DYNAMIC_MAC_TABLE_RESERVED      0x78
+#define DYNAMIC_MAC_TABLE_NOT_READY     0x80
+
+#define DYNAMIC_MAC_FID_SHIFT           16
+#define DYNAMIC_MAC_SRC_PORT_SHIFT      20
+#define DYNAMIC_MAC_TIMESTAMP_SHIFT     22
+#define DYNAMIC_MAC_ENTRIES_SHIFT       24
+#define DYNAMIC_MAC_ENTRIES_H_SHIFT     8
+
+/*
+#define MIB_COUNTER_VALUE               00-00000000-3FFFFFFF
+#define MIB_COUNTER_VALID               00-00000000-40000000
+#define MIB_COUNTER_OVERFLOW            00-00000000-80000000
+*/
+
+#define MIB_COUNTER_VALUE               0x3FFFFFFF
+#define MIB_COUNTER_VALID               0x40000000
+#define MIB_COUNTER_OVERFLOW            0x80000000
+
+#define MIB_PACKET_DROPPED              0x0000FFFF
+
+#define KS_MIB_PACKET_DROPPED_TX_0      0x100
+#define KS_MIB_PACKET_DROPPED_TX_1      0x101
+#define KS_MIB_PACKET_DROPPED_TX        0x102
+#define KS_MIB_PACKET_DROPPED_RX_0      0x103
+#define KS_MIB_PACKET_DROPPED_RX_1      0x104
+#define KS_MIB_PACKET_DROPPED_RX        0x105
+
+/* Change default LED mode. */
+#define SET_DEFAULT_LED                 LED_SPEED_DUPLEX_ACT
+
+#define MAC_ADDR_LEN                    6
+#define MAC_ADDR_ORDER(i)               (MAC_ADDR_LEN - 1 - (i))
+
+#define MAX_ETHERNET_BODY_SIZE          1500
+#define ETHERNET_HEADER_SIZE            14
+
+#define MAX_ETHERNET_PACKET_SIZE        \
+        (MAX_ETHERNET_BODY_SIZE + ETHERNET_HEADER_SIZE)
+
+#define REGULAR_RX_BUF_SIZE             (MAX_ETHERNET_PACKET_SIZE + 4)
+#define MAX_RX_BUF_SIZE                 (1912 + 4)
+
+#define ADDITIONAL_ENTRIES              16
+#define MAX_MULTICAST_LIST              32
+
+#define HW_MULTICAST_SIZE               8
+
+#define HW_TO_DEV_PORT(port)            (port - 1)
+
+enum {
+        media_connected,
+        media_disconnected
+};
+
+enum {
+        OID_COUNTER_UNKOWN,
+
+        OID_COUNTER_FIRST,
+
+        /* total transmit errors */
+        OID_COUNTER_XMIT_ERROR,
+
+        /* total receive errors */
+        OID_COUNTER_RCV_ERROR,
+
+        OID_COUNTER_LAST
+};
+
+/*
+ * Hardware descriptor definitions
+ */
+
+#define DESC_ALIGNMENT                  16
+#define BUFFER_ALIGNMENT                8
+
+#define NUM_OF_RX_DESC                  64
+#define NUM_OF_TX_DESC                  64
+
+#define KS_DESC_RX_FRAME_LEN            0x000007FF
+#define KS_DESC_RX_FRAME_TYPE           0x00008000
+#define KS_DESC_RX_ERROR_CRC            0x00010000
+#define KS_DESC_RX_ERROR_RUNT           0x00020000
+#define KS_DESC_RX_ERROR_TOO_LONG       0x00040000
+#define KS_DESC_RX_ERROR_PHY            0x00080000
+#define KS884X_DESC_RX_PORT_MASK        0x00300000
+#define KS_DESC_RX_MULTICAST            0x01000000
+#define KS_DESC_RX_ERROR                0x02000000
+#define KS_DESC_RX_ERROR_CSUM_UDP       0x04000000
+#define KS_DESC_RX_ERROR_CSUM_TCP       0x08000000
+#define KS_DESC_RX_ERROR_CSUM_IP        0x10000000
+#define KS_DESC_RX_LAST                 0x20000000
+#define KS_DESC_RX_FIRST                0x40000000
+#define KS_DESC_RX_ERROR_COND           \
+        (KS_DESC_RX_ERROR_CRC |         \
+        KS_DESC_RX_ERROR_RUNT |         \
+        KS_DESC_RX_ERROR_PHY |          \
+        KS_DESC_RX_ERROR_TOO_LONG)
+
+#define KS_DESC_HW_OWNED                0x80000000
+
+#define KS_DESC_BUF_SIZE                0x000007FF
+#define KS884X_DESC_TX_PORT_MASK        0x00300000
+#define KS_DESC_END_OF_RING             0x02000000
+#define KS_DESC_TX_CSUM_GEN_UDP         0x04000000
+#define KS_DESC_TX_CSUM_GEN_TCP         0x08000000
+#define KS_DESC_TX_CSUM_GEN_IP          0x10000000
+#define KS_DESC_TX_LAST                 0x20000000
+#define KS_DESC_TX_FIRST                0x40000000
+#define KS_DESC_TX_INTERRUPT            0x80000000
+
+#define KS_DESC_PORT_SHIFT              20
+
+#define KS_DESC_RX_MASK                 (KS_DESC_BUF_SIZE)
+
+#define KS_DESC_TX_MASK                 \
+        (KS_DESC_TX_INTERRUPT |         \
+        KS_DESC_TX_FIRST |              \
+        KS_DESC_TX_LAST |               \
+        KS_DESC_TX_CSUM_GEN_IP |        \
+        KS_DESC_TX_CSUM_GEN_TCP |       \
+        KS_DESC_TX_CSUM_GEN_UDP |       \
+        KS_DESC_BUF_SIZE)
+
+struct ksz_desc_rx_stat {
+#ifdef __BIG_ENDIAN_BITFIELD
+        u32 hw_owned:1;
+        u32 first_desc:1;
+        u32 last_desc:1;
+        u32 csum_err_ip:1;
+        u32 csum_err_tcp:1;
+        u32 csum_err_udp:1;
+        u32 error:1;
+        u32 multicast:1;
+        u32 src_port:4;
+        u32 err_phy:1;
+        u32 err_too_long:1;
+        u32 err_runt:1;
+        u32 err_crc:1;
+        u32 frame_type:1;
+        u32 reserved1:4;
+        u32 frame_len:11;
+#else
+        u32 frame_len:11;
+        u32 reserved1:4;
+        u32 frame_type:1;
+        u32 err_crc:1;
+        u32 err_runt:1;
+        u32 err_too_long:1;
+        u32 err_phy:1;
+        u32 src_port:4;
+        u32 multicast:1;
+        u32 error:1;
+        u32 csum_err_udp:1;
+        u32 csum_err_tcp:1;
+        u32 csum_err_ip:1;
+        u32 last_desc:1;
+        u32 first_desc:1;
+        u32 hw_owned:1;
+#endif
+};
+
+struct ksz_desc_tx_stat {
+#ifdef __BIG_ENDIAN_BITFIELD
+        u32 hw_owned:1;
+        u32 reserved1:31;
+#else
+        u32 reserved1:31;
+        u32 hw_owned:1;
+#endif
+};
+
+struct ksz_desc_rx_buf {
+#ifdef __BIG_ENDIAN_BITFIELD
+        u32 reserved4:6;
+        u32 end_of_ring:1;
+        u32 reserved3:14;
+        u32 buf_size:11;
+#else
+        u32 buf_size:11;
+        u32 reserved3:14;
+        u32 end_of_ring:1;
+        u32 reserved4:6;
+#endif
+};
+
+struct ksz_desc_tx_buf {
+#ifdef __BIG_ENDIAN_BITFIELD
+        u32 intr:1;
+        u32 first_seg:1;
+        u32 last_seg:1;
+        u32 csum_gen_ip:1;
+        u32 csum_gen_tcp:1;
+        u32 csum_gen_udp:1;
+        u32 end_of_ring:1;
+        u32 reserved4:1;
+        u32 dest_port:4;
+        u32 reserved3:9;
+        u32 buf_size:11;
+#else
+        u32 buf_size:11;
+        u32 reserved3:9;
+        u32 dest_port:4;
+        u32 reserved4:1;
+        u32 end_of_ring:1;
+        u32 csum_gen_udp:1;
+        u32 csum_gen_tcp:1;
+        u32 csum_gen_ip:1;
+        u32 last_seg:1;
+        u32 first_seg:1;
+        u32 intr:1;
+#endif
+};
+
+union desc_stat {
+        struct ksz_desc_rx_stat rx;
+        struct ksz_desc_tx_stat tx;
+        u32 data;
+};
+
+union desc_buf {
+        struct ksz_desc_rx_buf rx;
+        struct ksz_desc_tx_buf tx;
+        u32 data;
+};
+
+/**
+ * struct ksz_hw_desc - Hardware descriptor data structure
+ * @ctrl:       Descriptor control value.
+ * @buf:        Descriptor buffer value.
+ * @addr:       Physical address of memory buffer.
+ * @next:       Pointer to next hardware descriptor.
+ */
+struct ksz_hw_desc {
+        union desc_stat ctrl;
+        union desc_buf buf;
+        u32 addr;
+        u32 next;
+};
+
+/**
+ * struct ksz_sw_desc - Software descriptor data structure
+ * @ctrl:       Descriptor control value.
+ * @buf:        Descriptor buffer value.
+ * @buf_size:   Current buffers size value in hardware descriptor.
+ */
+struct ksz_sw_desc {
+        union desc_stat ctrl;
+        union desc_buf buf;
+        u32 buf_size;
+};
+
+/**
+ * struct ksz_dma_buf - OS dependent DMA buffer data structure
+ * @skb:        Associated socket buffer.
+ * @dma:        Associated physical DMA address.
+ * len:         Actual len used.
+ */
+struct ksz_dma_buf {
+        struct sk_buff *skb;
+        dma_addr_t dma;
+        int len;
+};
+
+/**
+ * struct ksz_desc - Descriptor structure
+ * @phw:        Hardware descriptor pointer to uncached physical memory.
+ * @sw:         Cached memory to hold hardware descriptor values for
+ *              manipulation.
+ * @dma_buf:    Operating system dependent data structure to hold physical
+ *              memory buffer allocation information.
+ */
+struct ksz_desc {
+        struct ksz_hw_desc *phw;
+        struct ksz_sw_desc sw;
+        struct ksz_dma_buf dma_buf;
+};
+
+#define DMA_BUFFER(desc)  ((struct ksz_dma_buf *)(&(desc)->dma_buf))
+
+/**
+ * struct ksz_desc_info - Descriptor information data structure
+ * @ring:       First descriptor in the ring.
+ * @cur:        Current descriptor being manipulated.
+ * @ring_virt:  First hardware descriptor in the ring.
+ * @ring_phys:  The physical address of the first descriptor of the ring.
+ * @size:       Size of hardware descriptor.
+ * @alloc:      Number of descriptors allocated.
+ * @avail:      Number of descriptors available for use.
+ * @last:       Index for last descriptor released to hardware.
+ * @next:       Index for next descriptor available for use.
+ * @mask:       Mask for index wrapping.
+ */
+struct ksz_desc_info {
+        struct ksz_desc *ring;
+        struct ksz_desc *cur;
+        struct ksz_hw_desc *ring_virt;
+        u32 ring_phys;
+        int size;
+        int alloc;
+        int avail;
+        int last;
+        int next;
+        int mask;
+};
+
+/*
+ * KSZ8842 switch definitions
+ */
+
+enum {
+        TABLE_STATIC_MAC = 0,
+        TABLE_VLAN,
+        TABLE_DYNAMIC_MAC,
+        TABLE_MIB
+};
+
+#define LEARNED_MAC_TABLE_ENTRIES       1024
+#define STATIC_MAC_TABLE_ENTRIES        8
+
+/**
+ * struct ksz_mac_table - Static MAC table data structure
+ * @mac_addr:   MAC address to filter.
+ * @vid:        VID value.
+ * @fid:        FID value.
+ * @ports:      Port membership.
+ * @override:   Override setting.
+ * @use_fid:    FID use setting.
+ * @valid:      Valid setting indicating the entry is being used.
+ */
+struct ksz_mac_table {
+        u8 mac_addr[MAC_ADDR_LEN];
+        u16 vid;
+        u8 fid;
+        u8 ports;
+        u8 override:1;
+        u8 use_fid:1;
+        u8 valid:1;
+};
+
+#define VLAN_TABLE_ENTRIES              16
+
+/**
+ * struct ksz_vlan_table - VLAN table data structure
+ * @vid:        VID value.
+ * @fid:        FID value.
+ * @member:     Port membership.
+ */
+struct ksz_vlan_table {
+        u16 vid;
+        u8 fid;
+        u8 member;
+};
+
+#define DIFFSERV_ENTRIES                64
+#define PRIO_802_1P_ENTRIES             8
+#define PRIO_QUEUES                     4
+
+#define SWITCH_PORT_NUM                 2
+#define TOTAL_PORT_NUM                  (SWITCH_PORT_NUM + 1)
+#define HOST_MASK                       (1 << SWITCH_PORT_NUM)
+#define PORT_MASK                       7
+
+#define MAIN_PORT                       0
+#define OTHER_PORT                      1
+#define HOST_PORT                       SWITCH_PORT_NUM
+
+#define PORT_COUNTER_NUM                0x20
+#define TOTAL_PORT_COUNTER_NUM          (PORT_COUNTER_NUM + 2)
+
+#define MIB_COUNTER_RX_LO_PRIORITY      0x00
+#define MIB_COUNTER_RX_HI_PRIORITY      0x01
+#define MIB_COUNTER_RX_UNDERSIZE        0x02
+#define MIB_COUNTER_RX_FRAGMENT         0x03
+#define MIB_COUNTER_RX_OVERSIZE         0x04
+#define MIB_COUNTER_RX_JABBER           0x05
+#define MIB_COUNTER_RX_SYMBOL_ERR       0x06
+#define MIB_COUNTER_RX_CRC_ERR          0x07
+#define MIB_COUNTER_RX_ALIGNMENT_ERR    0x08
+#define MIB_COUNTER_RX_CTRL_8808        0x09
+#define MIB_COUNTER_RX_PAUSE            0x0A
+#define MIB_COUNTER_RX_BROADCAST        0x0B
+#define MIB_COUNTER_RX_MULTICAST        0x0C
+#define MIB_COUNTER_RX_UNICAST          0x0D
+#define MIB_COUNTER_RX_OCTET_64         0x0E
+#define MIB_COUNTER_RX_OCTET_65_127     0x0F
+#define MIB_COUNTER_RX_OCTET_128_255    0x10
+#define MIB_COUNTER_RX_OCTET_256_511    0x11
+#define MIB_COUNTER_RX_OCTET_512_1023   0x12
+#define MIB_COUNTER_RX_OCTET_1024_1522  0x13
+#define MIB_COUNTER_TX_LO_PRIORITY      0x14
+#define MIB_COUNTER_TX_HI_PRIORITY      0x15
+#define MIB_COUNTER_TX_LATE_COLLISION   0x16
+#define MIB_COUNTER_TX_PAUSE            0x17
+#define MIB_COUNTER_TX_BROADCAST        0x18
+#define MIB_COUNTER_TX_MULTICAST        0x19
+#define MIB_COUNTER_TX_UNICAST          0x1A
+#define MIB_COUNTER_TX_DEFERRED         0x1B
+#define MIB_COUNTER_TX_TOTAL_COLLISION  0x1C
+#define MIB_COUNTER_TX_EXCESS_COLLISION 0x1D
+#define MIB_COUNTER_TX_SINGLE_COLLISION 0x1E
+#define MIB_COUNTER_TX_MULTI_COLLISION  0x1F
+
+#define MIB_COUNTER_RX_DROPPED_PACKET   0x20
+#define MIB_COUNTER_TX_DROPPED_PACKET   0x21
+
+/**
+ * struct ksz_port_mib - Port MIB data structure
+ * @cnt_ptr:    Current pointer to MIB counter index.
+ * @link_down:  Indication the link has just gone down.
+ * @state:      Connection status of the port.
+ * @mib_start:  The starting counter index.  Some ports do not start at 0.
+ * @counter:    64-bit MIB counter value.
+ * @dropped:    Temporary buffer to remember last read packet dropped values.
+ *
+ * MIB counters needs to be read periodically so that counters do not get
+ * overflowed and give incorrect values.  A right balance is needed to
+ * satisfy this condition and not waste too much CPU time.
+ *
+ * It is pointless to read MIB counters when the port is disconnected.  The
+ * @state provides the connection status so that MIB counters are read only
+ * when the port is connected.  The @link_down indicates the port is just
+ * disconnected so that all MIB counters are read one last time to update the
+ * information.
+ */
+struct ksz_port_mib {
+        u8 cnt_ptr;
+        u8 link_down;
+        u8 state;
+        u8 mib_start;
+
+        u64 counter[TOTAL_PORT_COUNTER_NUM];
+        u32 dropped[2];
+};
+
+/**
+ * struct ksz_port_cfg - Port configuration data structure
+ * @vid:        VID value.
+ * @member:     Port membership.
+ * @port_prio:  Port priority.
+ * @rx_rate:    Receive priority rate.
+ * @tx_rate:    Transmit priority rate.
+ * @stp_state:  Current Spanning Tree Protocol state.
+ */
+struct ksz_port_cfg {
+        u16 vid;
+        u8 member;
+        u8 port_prio;
+        u32 rx_rate[PRIO_QUEUES];
+        u32 tx_rate[PRIO_QUEUES];
+        int stp_state;
+};
+
+/**
+ * struct ksz_switch - KSZ8842 switch data structure
+ * @mac_table:  MAC table entries information.
+ * @vlan_table: VLAN table entries information.
+ * @port_cfg:   Port configuration information.
+ * @diffserv:   DiffServ priority settings.  Possible values from 6-bit of ToS
+ *              (bit7 ~ bit2) field.
+ * @p_802_1p:   802.1P priority settings.  Possible values from 3-bit of 802.1p
+ *              Tag priority field.
+ * @br_addr:    Bridge address.  Used for STP.
+ * @other_addr: Other MAC address.  Used for multiple network device mode.
+ * @broad_per:  Broadcast storm percentage.
+ * @member:     Current port membership.  Used for STP.
+ */
+struct ksz_switch {
+        struct ksz_mac_table mac_table[STATIC_MAC_TABLE_ENTRIES];
+        struct ksz_vlan_table vlan_table[VLAN_TABLE_ENTRIES];
+        struct ksz_port_cfg port_cfg[TOTAL_PORT_NUM];
+
+        u8 diffserv[DIFFSERV_ENTRIES];
+        u8 p_802_1p[PRIO_802_1P_ENTRIES];
+
+        u8 br_addr[MAC_ADDR_LEN];
+        u8 other_addr[MAC_ADDR_LEN];
+
+        u8 broad_per;
+        u8 member;
+};
+
+#define TX_RATE_UNIT                    10000
+
+/**
+ * struct ksz_port_info - Port information data structure
+ * @state:      Connection status of the port.
+ * @tx_rate:    Transmit rate divided by 10000 to get Mbit.
+ * @duplex:     Duplex mode.
+ * @advertised: Advertised auto-negotiation setting.  Used to determine link.
+ * @partner:    Auto-negotiation partner setting.  Used to determine link.
+ * @port_id:    Port index to access actual hardware register.
+ * @pdev:       Pointer to OS dependent network device.
+ */
+struct ksz_port_info {
+        uint state;
+        uint tx_rate;
+        u8 duplex;
+        u8 advertised;
+        u8 partner;
+        u8 port_id;
+        void *pdev;
+};
+
+#define MAX_TX_HELD_SIZE                52000
+
+/* Hardware features and bug fixes. */
+#define LINK_INT_WORKING                (1 << 0)
+#define SMALL_PACKET_TX_BUG             (1 << 1)
+#define HALF_DUPLEX_SIGNAL_BUG          (1 << 2)
+#define IPV6_CSUM_GEN_HACK              (1 << 3)
+#define RX_HUGE_FRAME                   (1 << 4)
+#define STP_SUPPORT                     (1 << 8)
+
+/* Software overrides. */
+#define PAUSE_FLOW_CTRL                 (1 << 0)
+#define FAST_AGING                      (1 << 1)
+
+/**
+ * struct ksz_hw - KSZ884X hardware data structure
+ * @io:                 Virtual address assigned.
+ * @ksz_switch:         Pointer to KSZ8842 switch.
+ * @port_info:          Port information.
+ * @port_mib:           Port MIB information.
+ * @dev_count:          Number of network devices this hardware supports.
+ * @dst_ports:          Destination ports in switch for transmission.
+ * @id:                 Hardware ID.  Used for display only.
+ * @mib_cnt:            Number of MIB counters this hardware has.
+ * @mib_port_cnt:       Number of ports with MIB counters.
+ * @tx_cfg:             Cached transmit control settings.
+ * @rx_cfg:             Cached receive control settings.
+ * @intr_mask:          Current interrupt mask.
+ * @intr_set:           Current interrup set.
+ * @intr_blocked:       Interrupt blocked.
+ * @rx_desc_info:       Receive descriptor information.
+ * @tx_desc_info:       Transmit descriptor information.
+ * @tx_int_cnt:         Transmit interrupt count.  Used for TX optimization.
+ * @tx_int_mask:        Transmit interrupt mask.  Used for TX optimization.
+ * @tx_size:            Transmit data size.  Used for TX optimization.
+ *                      The maximum is defined by MAX_TX_HELD_SIZE.
+ * @perm_addr:          Permanent MAC address.
+ * @override_addr:      Overrided MAC address.
+ * @address:            Additional MAC address entries.
+ * @addr_list_size:     Additional MAC address list size.
+ * @mac_override:       Indication of MAC address overrided.
+ * @promiscuous:        Counter to keep track of promiscuous mode set.
+ * @all_multi:          Counter to keep track of all multicast mode set.
+ * @multi_list:         Multicast address entries.
+ * @multi_bits:         Cached multicast hash table settings.
+ * @multi_list_size:    Multicast address list size.
+ * @enabled:            Indication of hardware enabled.
+ * @rx_stop:            Indication of receive process stop.
+ * @features:           Hardware features to enable.
+ * @overrides:          Hardware features to override.
+ * @parent:             Pointer to parent, network device private structure.
+ */
+struct ksz_hw {
+        void __iomem *io;
+
+        struct ksz_switch *ksz_switch;
+        struct ksz_port_info port_info[SWITCH_PORT_NUM];
+        struct ksz_port_mib port_mib[TOTAL_PORT_NUM];
+        int dev_count;
+        int dst_ports;
+        int id;
+        int mib_cnt;
+        int mib_port_cnt;
+
+        u32 tx_cfg;
+        u32 rx_cfg;
+        u32 intr_mask;
+        u32 intr_set;
+        uint intr_blocked;
+
+        struct ksz_desc_info rx_desc_info;
+        struct ksz_desc_info tx_desc_info;
+
+        int tx_int_cnt;
+        int tx_int_mask;
+        int tx_size;
+
+        u8 perm_addr[MAC_ADDR_LEN];
+        u8 override_addr[MAC_ADDR_LEN];
+        u8 address[ADDITIONAL_ENTRIES][MAC_ADDR_LEN];
+        u8 addr_list_size;
+        u8 mac_override;
+        u8 promiscuous;
+        u8 all_multi;
+        u8 multi_list[MAX_MULTICAST_LIST][MAC_ADDR_LEN];
+        u8 multi_bits[HW_MULTICAST_SIZE];
+        u8 multi_list_size;
+
+        u8 enabled;
+        u8 rx_stop;
+        u8 reserved2[1];
+
+        uint features;
+        uint overrides;
+
+        void *parent;
+};
+
+enum {
+        PHY_NO_FLOW_CTRL,
+        PHY_FLOW_CTRL,
+        PHY_TX_ONLY,
+        PHY_RX_ONLY
+};
+
+/**
+ * struct ksz_port - Virtual port data structure
+ * @duplex:             Duplex mode setting.  1 for half duplex, 2 for full
+ *                      duplex, and 0 for auto, which normally results in full
+ *                      duplex.
+ * @speed:              Speed setting.  10 for 10 Mbit, 100 for 100 Mbit, and
+ *                      0 for auto, which normally results in 100 Mbit.
+ * @force_link:         Force link setting.  0 for auto-negotiation, and 1 for
+ *                      force.
+ * @flow_ctrl:          Flow control setting.  PHY_NO_FLOW_CTRL for no flow
+ *                      control, and PHY_FLOW_CTRL for flow control.
+ *                      PHY_TX_ONLY and PHY_RX_ONLY are not supported for 100
+ *                      Mbit PHY.
+ * @first_port:         Index of first port this port supports.
+ * @mib_port_cnt:       Number of ports with MIB counters.
+ * @port_cnt:           Number of ports this port supports.
+ * @counter:            Port statistics counter.
+ * @hw:                 Pointer to hardware structure.
+ * @linked:             Pointer to port information linked to this port.
+ */
+struct ksz_port {
+        u8 duplex;
+        u8 speed;
+        u8 force_link;
+        u8 flow_ctrl;
+
+        int first_port;
+        int mib_port_cnt;
+        int port_cnt;
+        u64 counter[OID_COUNTER_LAST];
+
+        struct ksz_hw *hw;
+        struct ksz_port_info *linked;
+};
+
+/**
+ * struct ksz_timer_info - Timer information data structure
+ * @timer:      Kernel timer.
+ * @cnt:        Running timer counter.
+ * @max:        Number of times to run timer; -1 for infinity.
+ * @period:     Timer period in jiffies.
+ */
+struct ksz_timer_info {
+        struct timer_list timer;
+        int cnt;
+        int max;
+        int period;
+};
+
+/**
+ * struct ksz_shared_mem - OS dependent shared memory data structure
+ * @dma_addr:   Physical DMA address allocated.
+ * @alloc_size: Allocation size.
+ * @phys:       Actual physical address used.
+ * @alloc_virt: Virtual address allocated.
+ * @virt:       Actual virtual address used.
+ */
+struct ksz_shared_mem {
+        dma_addr_t dma_addr;
+        uint alloc_size;
+        uint phys;
+        u8 *alloc_virt;
+        u8 *virt;
+};
+
+/**
+ * struct ksz_counter_info - OS dependent counter information data structure
+ * @counter:    Wait queue to wakeup after counters are read.
+ * @time:       Next time in jiffies to read counter.
+ * @read:       Indication of counters read in full or not.
+ */
+struct ksz_counter_info {
+        wait_queue_head_t counter;
+        unsigned long time;
+        int read;
+};
+
+/**
+ * struct dev_info - Network device information data structure
+ * @dev:                Pointer to network device.
+ * @pdev:               Pointer to PCI device.
+ * @hw:                 Hardware structure.
+ * @desc_pool:          Physical memory used for descriptor pool.
+ * @hwlock:             Spinlock to prevent hardware from accessing.
+ * @lock:               Mutex lock to prevent device from accessing.
+ * @dev_rcv:            Receive process function used.
+ * @last_skb:           Socket buffer allocated for descriptor rx fragments.
+ * @skb_index:          Buffer index for receiving fragments.
+ * @skb_len:            Buffer length for receiving fragments.
+ * @mib_read:           Workqueue to read MIB counters.
+ * @mib_timer_info:     Timer to read MIB counters.
+ * @counter:            Used for MIB reading.
+ * @mtu:                Current MTU used.  The default is REGULAR_RX_BUF_SIZE;
+ *                      the maximum is MAX_RX_BUF_SIZE.
+ * @opened:             Counter to keep track of device open.
+ * @rx_tasklet:         Receive processing tasklet.
+ * @tx_tasklet:         Transmit processing tasklet.
+ * @wol_enable:         Wake-on-LAN enable set by ethtool.
+ * @wol_support:        Wake-on-LAN support used by ethtool.
+ * @pme_wait:           Used for KSZ8841 power management.
+ */
+struct dev_info {
+        struct net_device *dev;
+        struct pci_dev *pdev;
+
+        struct ksz_hw hw;
+        struct ksz_shared_mem desc_pool;
+
+        spinlock_t hwlock;
+        struct mutex lock;
+
+        int (*dev_rcv)(struct dev_info *);
+
+        struct sk_buff *last_skb;
+        int skb_index;
+        int skb_len;
+
+        struct work_struct mib_read;
+        struct ksz_timer_info mib_timer_info;
+        struct ksz_counter_info counter[TOTAL_PORT_NUM];
+
+        int mtu;
+        int opened;
+
+        struct tasklet_struct rx_tasklet;
+        struct tasklet_struct tx_tasklet;
+
+        int wol_enable;
+        int wol_support;
+        unsigned long pme_wait;
+};
+
+/**
+ * struct dev_priv - Network device private data structure
+ * @adapter:            Adapter device information.
+ * @port:               Port information.
+ * @monitor_time_info:  Timer to monitor ports.
+ * @stats:              Network statistics.
+ * @proc_sem:           Semaphore for proc accessing.
+ * @id:                 Device ID.
+ * @mii_if:             MII interface information.
+ * @advertising:        Temporary variable to store advertised settings.
+ * @msg_enable:         The message flags controlling driver output.
+ * @media_state:        The connection status of the device.
+ * @multicast:          The all multicast state of the device.
+ * @promiscuous:        The promiscuous state of the device.
+ */
+struct dev_priv {
+        struct dev_info *adapter;
+        struct ksz_port port;
+        struct ksz_timer_info monitor_timer_info;
+        struct net_device_stats stats;
+
+        struct semaphore proc_sem;
+        int id;
+
+        struct mii_if_info mii_if;
+        u32 advertising;
+
+        u32 msg_enable;
+        int media_state;
+        int multicast;
+        int promiscuous;
+};
+
+#define ks_info(_ks, _msg...) dev_info(&(_ks)->pdev->dev, _msg)
+#define ks_warn(_ks, _msg...) dev_warn(&(_ks)->pdev->dev, _msg)
+#define ks_dbg(_ks, _msg...) dev_dbg(&(_ks)->pdev->dev, _msg)
+#define ks_err(_ks, _msg...) dev_err(&(_ks)->pdev->dev, _msg)
+
+#define DRV_NAME                "KSZ884X PCI"
+#define DEVICE_NAME             "KSZ884x PCI"
+#define DRV_VERSION             "1.0.0"
+#define DRV_RELDATE             "Feb 8, 2010"
+
+static char version[] __devinitdata =
+        "Micrel " DEVICE_NAME " " DRV_VERSION " (" DRV_RELDATE ")";
+
+static u8 DEFAULT_MAC_ADDRESS[] = { 0x00, 0x10, 0xA1, 0x88, 0x42, 0x01 };
+
+/*
+ * Interrupt processing primary routines
+ */
+
+static inline void hw_ack_intr(struct ksz_hw *hw, uint interrupt)
+{
+        writel(interrupt, hw->io + KS884X_INTERRUPTS_STATUS);
+}
+
+static inline void hw_dis_intr(struct ksz_hw *hw)
+{
+        hw->intr_blocked = hw->intr_mask;
+        writel(0, hw->io + KS884X_INTERRUPTS_ENABLE);
+        hw->intr_set = readl(hw->io + KS884X_INTERRUPTS_ENABLE);
+}
+
+static inline void hw_set_intr(struct ksz_hw *hw, uint interrupt)
+{
+        hw->intr_set = interrupt;
+        writel(interrupt, hw->io + KS884X_INTERRUPTS_ENABLE);
+}
+
+static inline void hw_ena_intr(struct ksz_hw *hw)
+{
+        hw->intr_blocked = 0;
+        hw_set_intr(hw, hw->intr_mask);
+}
+
+static inline void hw_dis_intr_bit(struct ksz_hw *hw, uint bit)
+{
+        hw->intr_mask &= ~(bit);
+}
+
+static inline void hw_turn_off_intr(struct ksz_hw *hw, uint interrupt)
+{
+        u32 read_intr;
+
+        read_intr = readl(hw->io + KS884X_INTERRUPTS_ENABLE);
+        hw->intr_set = read_intr & ~interrupt;
+        writel(hw->intr_set, hw->io + KS884X_INTERRUPTS_ENABLE);
+        hw_dis_intr_bit(hw, interrupt);
+}
+
+/**
+ * hw_turn_on_intr - turn on specified interrupts
+ * @hw:         The hardware instance.
+ * @bit:        The interrupt bits to be on.
+ *
+ * This routine turns on the specified interrupts in the interrupt mask so that
+ * those interrupts will be enabled.
+ */
+static void hw_turn_on_intr(struct ksz_hw *hw, u32 bit)
+{
+        hw->intr_mask |= bit;
+
+        if (!hw->intr_blocked)
+                hw_set_intr(hw, hw->intr_mask);
+}
+
+static inline void hw_ena_intr_bit(struct ksz_hw *hw, uint interrupt)
+{
+        u32 read_intr;
+
+        read_intr = readl(hw->io + KS884X_INTERRUPTS_ENABLE);
+        hw->intr_set = read_intr | interrupt;
+        writel(hw->intr_set, hw->io + KS884X_INTERRUPTS_ENABLE);
+}
+
+static inline void hw_read_intr(struct ksz_hw *hw, uint *status)
+{
+        *status = readl(hw->io + KS884X_INTERRUPTS_STATUS);
+        *status = *status & hw->intr_set;
+}
+
+static inline void hw_restore_intr(struct ksz_hw *hw, uint interrupt)
+{
+        if (interrupt)
+                hw_ena_intr(hw);
+}
+
+/**
+ * hw_block_intr - block hardware interrupts
+ *
+ * This function blocks all interrupts of the hardware and returns the current
+ * interrupt enable mask so that interrupts can be restored later.
+ *
+ * Return the current interrupt enable mask.
+ */
+static uint hw_block_intr(struct ksz_hw *hw)
+{
+        uint interrupt = 0;
+
+        if (!hw->intr_blocked) {
+                hw_dis_intr(hw);
+                interrupt = hw->intr_blocked;
+        }
+        return interrupt;
+}
+
+/*
+ * Hardware descriptor routines
+ */
+
+static inline void reset_desc(struct ksz_desc *desc, union desc_stat status)
+{
+        status.rx.hw_owned = 0;
+        desc->phw->ctrl.data = cpu_to_le32(status.data);
+}
+
+static inline void release_desc(struct ksz_desc *desc)
+{
+        desc->sw.ctrl.tx.hw_owned = 1;
+        if (desc->sw.buf_size != desc->sw.buf.data) {
+                desc->sw.buf_size = desc->sw.buf.data;
+                desc->phw->buf.data = cpu_to_le32(desc->sw.buf.data);
+        }
+        desc->phw->ctrl.data = cpu_to_le32(desc->sw.ctrl.data);
+}
+
+static void get_rx_pkt(struct ksz_desc_info *info, struct ksz_desc **desc)
+{
+        *desc = &info->ring[info->last];
+        info->last++;
+        info->last &= info->mask;
+        info->avail--;
+        (*desc)->sw.buf.data &= ~KS_DESC_RX_MASK;
+}
+
+static inline void set_rx_buf(struct ksz_desc *desc, u32 addr)
+{
+        desc->phw->addr = cpu_to_le32(addr);
+}
+
+static inline void set_rx_len(struct ksz_desc *desc, u32 len)
+{
+        desc->sw.buf.rx.buf_size = len;
+}
+
+static inline void get_tx_pkt(struct ksz_desc_info *info,
+        struct ksz_desc **desc)
+{
+        *desc = &info->ring[info->next];
+        info->next++;
+        info->next &= info->mask;
+        info->avail--;
+        (*desc)->sw.buf.data &= ~KS_DESC_TX_MASK;
+}
+
+static inline void set_tx_buf(struct ksz_desc *desc, u32 addr)
+{
+        desc->phw->addr = cpu_to_le32(addr);
+}
+
+static inline void set_tx_len(struct ksz_desc *desc, u32 len)
+{
+        desc->sw.buf.tx.buf_size = len;
+}
+
+/* Switch functions */
+
+#define TABLE_READ                      0x10
+#define TABLE_SEL_SHIFT                 2
+
+#define HW_DELAY(hw, reg)                       \
+        do {                                    \
+                u16 dummy;                      \
+                dummy = readw(hw->io + reg);    \
+        } while (0)
+
+/**
+ * sw_r_table - read 4 bytes of data from switch table
+ * @hw:         The hardware instance.
+ * @table:      The table selector.
+ * @addr:       The address of the table entry.
+ * @data:       Buffer to store the read data.
+ *
+ * This routine reads 4 bytes of data from the table of the switch.
+ * Hardware interrupts are disabled to minimize corruption of read data.
+ */
+static void sw_r_table(struct ksz_hw *hw, int table, u16 addr, u32 *data)
+{
+        u16 ctrl_addr;
+        uint interrupt;
+
+        ctrl_addr = (((table << TABLE_SEL_SHIFT) | TABLE_READ) << 8) | addr;
+
+        interrupt = hw_block_intr(hw);
+
+        writew(ctrl_addr, hw->io + KS884X_IACR_OFFSET);
+        HW_DELAY(hw, KS884X_IACR_OFFSET);
+        *data = readl(hw->io + KS884X_ACC_DATA_0_OFFSET);
+
+        hw_restore_intr(hw, interrupt);
+}
+
+/**
+ * sw_w_table_64 - write 8 bytes of data to the switch table
+ * @hw:         The hardware instance.
+ * @table:      The table selector.
+ * @addr:       The address of the table entry.
+ * @data_hi:    The high part of data to be written (bit63 ~ bit32).
+ * @data_lo:    The low part of data to be written (bit31 ~ bit0).
+ *
+ * This routine writes 8 bytes of data to the table of the switch.
+ * Hardware interrupts are disabled to minimize corruption of written data.
+ */
+static void sw_w_table_64(struct ksz_hw *hw, int table, u16 addr, u32 data_hi,
+        u32 data_lo)
+{
+        u16 ctrl_addr;
+        uint interrupt;
+
+        ctrl_addr = ((table << TABLE_SEL_SHIFT) << 8) | addr;
+
+        interrupt = hw_block_intr(hw);
+
+        writel(data_hi, hw->io + KS884X_ACC_DATA_4_OFFSET);
+        writel(data_lo, hw->io + KS884X_ACC_DATA_0_OFFSET);
+
+        writew(ctrl_addr, hw->io + KS884X_IACR_OFFSET);
+        HW_DELAY(hw, KS884X_IACR_OFFSET);
+
+        hw_restore_intr(hw, interrupt);
+}
+
+/**
+ * sw_w_sta_mac_table - write to the static MAC table
+ * @hw:         The hardware instance.
+ * @addr:       The address of the table entry.
+ * @mac_addr:   The MAC address.
+ * @ports:      The port members.
+ * @override:   The flag to override the port receive/transmit settings.
+ * @valid:      The flag to indicate entry is valid.
+ * @use_fid:    The flag to indicate the FID is valid.
+ * @fid:        The FID value.
+ *
+ * This routine writes an entry of the static MAC table of the switch.  It
+ * calls sw_w_table_64() to write the data.
+ */
+static void sw_w_sta_mac_table(struct ksz_hw *hw, u16 addr, u8 *mac_addr,
+        u8 ports, int override, int valid, int use_fid, u8 fid)
+{
+        u32 data_hi;
+        u32 data_lo;
+
+        data_lo = ((u32) mac_addr[2] << 24) |
+                ((u32) mac_addr[3] << 16) |
+                ((u32) mac_addr[4] << 8) | mac_addr[5];
+        data_hi = ((u32) mac_addr[0] << 8) | mac_addr[1];
+        data_hi |= (u32) ports << STATIC_MAC_FWD_PORTS_SHIFT;
+
+        if (override)
+                data_hi |= STATIC_MAC_TABLE_OVERRIDE;
+        if (use_fid) {
+                data_hi |= STATIC_MAC_TABLE_USE_FID;
+                data_hi |= (u32) fid << STATIC_MAC_FID_SHIFT;
+        }
+        if (valid)
+                data_hi |= STATIC_MAC_TABLE_VALID;
+
+        sw_w_table_64(hw, TABLE_STATIC_MAC, addr, data_hi, data_lo);
+}
+
+/**
+ * sw_r_vlan_table - read from the VLAN table
+ * @hw:         The hardware instance.
+ * @addr:       The address of the table entry.
+ * @vid:        Buffer to store the VID.
+ * @fid:        Buffer to store the VID.
+ * @member:     Buffer to store the port membership.
+ *
+ * This function reads an entry of the VLAN table of the switch.  It calls
+ * sw_r_table() to get the data.
+ *
+ * Return 0 if the entry is valid; otherwise -1.
+ */
+static int sw_r_vlan_table(struct ksz_hw *hw, u16 addr, u16 *vid, u8 *fid,
+        u8 *member)
+{
+        u32 data;
+
+        sw_r_table(hw, TABLE_VLAN, addr, &data);
+        if (data & VLAN_TABLE_VALID) {
+                *vid = (u16)(data & VLAN_TABLE_VID);
+                *fid = (u8)((data & VLAN_TABLE_FID) >> VLAN_TABLE_FID_SHIFT);
+                *member = (u8)((data & VLAN_TABLE_MEMBERSHIP) >>
+                        VLAN_TABLE_MEMBERSHIP_SHIFT);
+                return 0;
+        }
+        return -1;
+}
+
+/**
+ * port_r_mib_cnt - read MIB counter
+ * @hw:         The hardware instance.
+ * @port:       The port index.
+ * @addr:       The address of the counter.
+ * @cnt:        Buffer to store the counter.
+ *
+ * This routine reads a MIB counter of the port.
+ * Hardware interrupts are disabled to minimize corruption of read data.
+ */
+static void port_r_mib_cnt(struct ksz_hw *hw, int port, u16 addr, u64 *cnt)
+{
+        u32 data;
+        u16 ctrl_addr;
+        uint interrupt;
+        int timeout;
+
+        ctrl_addr = addr + PORT_COUNTER_NUM * port;
+
+        interrupt = hw_block_intr(hw);
+
+        ctrl_addr |= (((TABLE_MIB << TABLE_SEL_SHIFT) | TABLE_READ) << 8);
+        writew(ctrl_addr, hw->io + KS884X_IACR_OFFSET);
+        HW_DELAY(hw, KS884X_IACR_OFFSET);
+
+        for (timeout = 100; timeout > 0; timeout--) {
+                data = readl(hw->io + KS884X_ACC_DATA_0_OFFSET);
+
+                if (data & MIB_COUNTER_VALID) {
+                        if (data & MIB_COUNTER_OVERFLOW)
+                                *cnt += MIB_COUNTER_VALUE + 1;
+                        *cnt += data & MIB_COUNTER_VALUE;
+                        break;
+                }
+        }
+
+        hw_restore_intr(hw, interrupt);
+}
+
+/**
+ * port_r_mib_pkt - read dropped packet counts
+ * @hw:         The hardware instance.
+ * @port:       The port index.
+ * @cnt:        Buffer to store the receive and transmit dropped packet counts.
+ *
+ * This routine reads the dropped packet counts of the port.
+ * Hardware interrupts are disabled to minimize corruption of read data.
+ */
+static void port_r_mib_pkt(struct ksz_hw *hw, int port, u32 *last, u64 *cnt)
+{
+        u32 cur;
+        u32 data;
+        u16 ctrl_addr;
+        uint interrupt;
+        int index;
+
+        index = KS_MIB_PACKET_DROPPED_RX_0 + port;
+        do {
+                interrupt = hw_block_intr(hw);
+
+                ctrl_addr = (u16) index;
+                ctrl_addr |= (((TABLE_MIB << TABLE_SEL_SHIFT) | TABLE_READ)
+                        << 8);
+                writew(ctrl_addr, hw->io + KS884X_IACR_OFFSET);
+                HW_DELAY(hw, KS884X_IACR_OFFSET);
+                data = readl(hw->io + KS884X_ACC_DATA_0_OFFSET);
+
+                hw_restore_intr(hw, interrupt);
+
+                data &= MIB_PACKET_DROPPED;
+                cur = *last;
+                if (data != cur) {
+                        *last = data;
+                        if (data < cur)
+                                data += MIB_PACKET_DROPPED + 1;
+                        data -= cur;
+                        *cnt += data;
+                }
+                ++last;
+                ++cnt;
+                index -= KS_MIB_PACKET_DROPPED_TX -
+                        KS_MIB_PACKET_DROPPED_TX_0 + 1;
+        } while (index >= KS_MIB_PACKET_DROPPED_TX_0 + port);
+}
+
+/**
+ * port_r_cnt - read MIB counters periodically
+ * @hw:         The hardware instance.
+ * @port:       The port index.
+ *
+ * This routine is used to read the counters of the port periodically to avoid
+ * counter overflow.  The hardware should be acquired first before calling this
+ * routine.
+ *
+ * Return non-zero when not all counters not read.
+ */
+static int port_r_cnt(struct ksz_hw *hw, int port)
+{
+        struct ksz_port_mib *mib = &hw->port_mib[port];
+
+        if (mib->mib_start < PORT_COUNTER_NUM)
+                while (mib->cnt_ptr < PORT_COUNTER_NUM) {
+                        port_r_mib_cnt(hw, port, mib->cnt_ptr,
+                                &mib->counter[mib->cnt_ptr]);
+                        ++mib->cnt_ptr;
+                }
+        if (hw->mib_cnt > PORT_COUNTER_NUM)
+                port_r_mib_pkt(hw, port, mib->dropped,
+                        &mib->counter[PORT_COUNTER_NUM]);
+        mib->cnt_ptr = 0;
+        return 0;
+}
+
+/**
+ * port_init_cnt - initialize MIB counter values
+ * @hw:         The hardware instance.
+ * @port:       The port index.
+ *
+ * This routine is used to initialize all counters to zero if the hardware
+ * cannot do it after reset.
+ */
+static void port_init_cnt(struct ksz_hw *hw, int port)
+{
+        struct ksz_port_mib *mib = &hw->port_mib[port];
+
+        mib->cnt_ptr = 0;
+        if (mib->mib_start < PORT_COUNTER_NUM)
+                do {
+                        port_r_mib_cnt(hw, port, mib->cnt_ptr,
+                                &mib->counter[mib->cnt_ptr]);
+                        ++mib->cnt_ptr;
+                } while (mib->cnt_ptr < PORT_COUNTER_NUM);
+        if (hw->mib_cnt > PORT_COUNTER_NUM)
+                port_r_mib_pkt(hw, port, mib->dropped,
+                        &mib->counter[PORT_COUNTER_NUM]);
+        memset((void *) mib->counter, 0, sizeof(u64) * TOTAL_PORT_COUNTER_NUM);
+        mib->cnt_ptr = 0;
+}
+
+/*
+ * Port functions
+ */
+
+/**
+ * port_chk - check port register bits
+ * @hw:         The hardware instance.
+ * @port:       The port index.
+ * @offset:     The offset of the port register.
+ * @bits:       The data bits to check.
+ *
+ * This function checks whether the specified bits of the port register are set
+ * or not.
+ *
+ * Return 0 if the bits are not set.
+ */
+static int port_chk(struct ksz_hw *hw, int port, int offset, u16 bits)
+{
+        u32 addr;
+        u16 data;
+
+        PORT_CTRL_ADDR(port, addr);
+        addr += offset;
+        data = readw(hw->io + addr);
+        return (data & bits) == bits;
+}
+
+/**
+ * port_cfg - set port register bits
+ * @hw:         The hardware instance.
+ * @port:       The port index.
+ * @offset:     The offset of the port register.
+ * @bits:       The data bits to set.
+ * @set:        The flag indicating whether the bits are to be set or not.
+ *
+ * This routine sets or resets the specified bits of the port register.
+ */
+static void port_cfg(struct ksz_hw *hw, int port, int offset, u16 bits,
+        int set)
+{
+        u32 addr;
+        u16 data;
+
+        PORT_CTRL_ADDR(port, addr);
+        addr += offset;
+        data = readw(hw->io + addr);
+        if (set)
+                data |= bits;
+        else
+                data &= ~bits;
+        writew(data, hw->io + addr);
+}
+
+/**
+ * port_chk_shift - check port bit
+ * @hw:         The hardware instance.
+ * @port:       The port index.
+ * @offset:     The offset of the register.
+ * @shift:      Number of bits to shift.
+ *
+ * This function checks whether the specified port is set in the register or
+ * not.
+ *
+ * Return 0 if the port is not set.
+ */
+static int port_chk_shift(struct ksz_hw *hw, int port, u32 addr, int shift)
+{
+        u16 data;
+        u16 bit = 1 << port;
+
+        data = readw(hw->io + addr);
+        data >>= shift;
+        return (data & bit) == bit;
+}
+
+/**
+ * port_cfg_shift - set port bit
+ * @hw:         The hardware instance.
+ * @port:       The port index.
+ * @offset:     The offset of the register.
+ * @shift:      Number of bits to shift.
+ * @set:        The flag indicating whether the port is to be set or not.
+ *
+ * This routine sets or resets the specified port in the register.
+ */
+static void port_cfg_shift(struct ksz_hw *hw, int port, u32 addr, int shift,
+        int set)
+{
+        u16 data;
+        u16 bits = 1 << port;
+
+        data = readw(hw->io + addr);
+        bits <<= shift;
+        if (set)
+                data |= bits;
+        else
+                data &= ~bits;
+        writew(data, hw->io + addr);
+}
+
+/**
+ * port_r8 - read byte from port register
+ * @hw:         The hardware instance.
+ * @port:       The port index.
+ * @offset:     The offset of the port register.
+ * @data:       Buffer to store the data.
+ *
+ * This routine reads a byte from the port register.
+ */
+static void port_r8(struct ksz_hw *hw, int port, int offset, u8 *data)
+{
+        u32 addr;
+
+        PORT_CTRL_ADDR(port, addr);
+        addr += offset;
+        *data = readb(hw->io + addr);
+}
+
+/**
+ * port_r16 - read word from port register.
+ * @hw:         The hardware instance.
+ * @port:       The port index.
+ * @offset:     The offset of the port register.
+ * @data:       Buffer to store the data.
+ *
+ * This routine reads a word from the port register.
+ */
+static void port_r16(struct ksz_hw *hw, int port, int offset, u16 *data)
+{
+        u32 addr;
+
+        PORT_CTRL_ADDR(port, addr);
+        addr += offset;
+        *data = readw(hw->io + addr);
+}
+
+/**
+ * port_w16 - write word to port register.
+ * @hw:         The hardware instance.
+ * @port:       The port index.
+ * @offset:     The offset of the port register.
+ * @data:       Data to write.
+ *
+ * This routine writes a word to the port register.
+ */
+static void port_w16(struct ksz_hw *hw, int port, int offset, u16 data)
+{
+        u32 addr;
+
+        PORT_CTRL_ADDR(port, addr);
+        addr += offset;
+        writew(data, hw->io + addr);
+}
+
+/**
+ * sw_chk - check switch register bits
+ * @hw:         The hardware instance.
+ * @addr:       The address of the switch register.
+ * @bits:       The data bits to check.
+ *
+ * This function checks whether the specified bits of the switch register are
+ * set or not.
+ *
+ * Return 0 if the bits are not set.
+ */
+static int sw_chk(struct ksz_hw *hw, u32 addr, u16 bits)
+{
+        u16 data;
+
+        data = readw(hw->io + addr);
+        return (data & bits) == bits;
+}
+
+/**
+ * sw_cfg - set switch register bits
+ * @hw:         The hardware instance.
+ * @addr:       The address of the switch register.
+ * @bits:       The data bits to set.
+ * @set:        The flag indicating whether the bits are to be set or not.
+ *
+ * This function sets or resets the specified bits of the switch register.
+ */
+static void sw_cfg(struct ksz_hw *hw, u32 addr, u16 bits, int set)
+{
+        u16 data;
+
+        data = readw(hw->io + addr);
+        if (set)
+                data |= bits;
+        else
+                data &= ~bits;
+        writew(data, hw->io + addr);
+}
+
+/* Bandwidth */
+
+static inline void port_cfg_broad_storm(struct ksz_hw *hw, int p, int set)
+{
+        port_cfg(hw, p,
+                KS8842_PORT_CTRL_1_OFFSET, PORT_BROADCAST_STORM, set);
+}
+
+static inline int port_chk_broad_storm(struct ksz_hw *hw, int p)
+{
+        return port_chk(hw, p,
+                KS8842_PORT_CTRL_1_OFFSET, PORT_BROADCAST_STORM);
+}
+
+/* Driver set switch broadcast storm protection at 10% rate. */
+#define BROADCAST_STORM_PROTECTION_RATE 10
+
+/* 148,800 frames * 67 ms / 100 */
+#define BROADCAST_STORM_VALUE           9969
+
+/**
+ * sw_cfg_broad_storm - configure broadcast storm threshold
+ * @hw:         The hardware instance.
+ * @percent:    Broadcast storm threshold in percent of transmit rate.
+ *
+ * This routine configures the broadcast storm threshold of the switch.
+ */
+static void sw_cfg_broad_storm(struct ksz_hw *hw, u8 percent)
+{
+        u16 data;
+        u32 value = ((u32) BROADCAST_STORM_VALUE * (u32) percent / 100);
+
+        if (value > BROADCAST_STORM_RATE)
+                value = BROADCAST_STORM_RATE;
+
+        data = readw(hw->io + KS8842_SWITCH_CTRL_3_OFFSET);
+        data &= ~(BROADCAST_STORM_RATE_LO | BROADCAST_STORM_RATE_HI);
+        data |= ((value & 0x00FF) << 8) | ((value & 0xFF00) >> 8);
+        writew(data, hw->io + KS8842_SWITCH_CTRL_3_OFFSET);
+}
+
+/**
+ * sw_get_board_storm - get broadcast storm threshold
+ * @hw:         The hardware instance.
+ * @percent:    Buffer to store the broadcast storm threshold percentage.
+ *
+ * This routine retrieves the broadcast storm threshold of the switch.
+ */
+static void sw_get_broad_storm(struct ksz_hw *hw, u8 *percent)
+{
+        int num;
+        u16 data;
+
+        data = readw(hw->io + KS8842_SWITCH_CTRL_3_OFFSET);
+        num = (data & BROADCAST_STORM_RATE_HI);
+        num <<= 8;
+        num |= (data & BROADCAST_STORM_RATE_LO) >> 8;
+        num = (num * 100 + BROADCAST_STORM_VALUE / 2) / BROADCAST_STORM_VALUE;
+        *percent = (u8) num;
+}
+
+/**
+ * sw_dis_broad_storm - disable broadstorm
+ * @hw:         The hardware instance.
+ * @port:       The port index.
+ *
+ * This routine disables the broadcast storm limit function of the switch.
+ */
+static void sw_dis_broad_storm(struct ksz_hw *hw, int port)
+{
+        port_cfg_broad_storm(hw, port, 0);
+}
+
+/**
+ * sw_ena_broad_storm - enable broadcast storm
+ * @hw:         The hardware instance.
+ * @port:       The port index.
+ *
+ * This routine enables the broadcast storm limit function of the switch.
+ */
+static void sw_ena_broad_storm(struct ksz_hw *hw, int port)
+{
+        sw_cfg_broad_storm(hw, hw->ksz_switch->broad_per);
+        port_cfg_broad_storm(hw, port, 1);
+}
+
+/**
+ * sw_init_broad_storm - initialize broadcast storm
+ * @hw:         The hardware instance.
+ *
+ * This routine initializes the broadcast storm limit function of the switch.
+ */
+static void sw_init_broad_storm(struct ksz_hw *hw)
+{
+        int port;
+
+        hw->ksz_switch->broad_per = 1;
+        sw_cfg_broad_storm(hw, hw->ksz_switch->broad_per);
+        for (port = 0; port < TOTAL_PORT_NUM; port++)
+                sw_dis_broad_storm(hw, port);
+        sw_cfg(hw, KS8842_SWITCH_CTRL_2_OFFSET, MULTICAST_STORM_DISABLE, 1);
+}
+
+/**
+ * hw_cfg_broad_storm - configure broadcast storm
+ * @hw:         The hardware instance.
+ * @percent:    Broadcast storm threshold in percent of transmit rate.
+ *
+ * This routine configures the broadcast storm threshold of the switch.
+ * It is called by user functions.  The hardware should be acquired first.
+ */
+static void hw_cfg_broad_storm(struct ksz_hw *hw, u8 percent)
+{
+        if (percent > 100)
+                percent = 100;
+
+        sw_cfg_broad_storm(hw, percent);
+        sw_get_broad_storm(hw, &percent);
+        hw->ksz_switch->broad_per = percent;
+}
+
+/**
+ * sw_dis_prio_rate - disable switch priority rate
+ * @hw:         The hardware instance.
+ * @port:       The port index.
+ *
+ * This routine disables the priority rate function of the switch.
+ */
+static void sw_dis_prio_rate(struct ksz_hw *hw, int port)
+{
+        u32 addr;
+
+        PORT_CTRL_ADDR(port, addr);
+        addr += KS8842_PORT_IN_RATE_OFFSET;
+        writel(0, hw->io + addr);
+}
+
+/**
+ * sw_init_prio_rate - initialize switch prioirty rate
+ * @hw:         The hardware instance.
+ *
+ * This routine initializes the priority rate function of the switch.
+ */
+static void sw_init_prio_rate(struct ksz_hw *hw)
+{
+        int port;
+        int prio;
+        struct ksz_switch *sw = hw->ksz_switch;
+
+        for (port = 0; port < TOTAL_PORT_NUM; port++) {
+                for (prio = 0; prio < PRIO_QUEUES; prio++) {
+                        sw->port_cfg[port].rx_rate[prio] =
+                        sw->port_cfg[port].tx_rate[prio] = 0;
+                }
+                sw_dis_prio_rate(hw, port);
+        }
+}
+
+/* Communication */
+
+static inline void port_cfg_back_pressure(struct ksz_hw *hw, int p, int set)
+{
+        port_cfg(hw, p,
+                KS8842_PORT_CTRL_2_OFFSET, PORT_BACK_PRESSURE, set);
+}
+
+static inline void port_cfg_force_flow_ctrl(struct ksz_hw *hw, int p, int set)
+{
+        port_cfg(hw, p,
+                KS8842_PORT_CTRL_2_OFFSET, PORT_FORCE_FLOW_CTRL, set);
+}
+
+static inline int port_chk_back_pressure(struct ksz_hw *hw, int p)
+{
+        return port_chk(hw, p,
+                KS8842_PORT_CTRL_2_OFFSET, PORT_BACK_PRESSURE);
+}
+
+static inline int port_chk_force_flow_ctrl(struct ksz_hw *hw, int p)
+{
+        return port_chk(hw, p,
+                KS8842_PORT_CTRL_2_OFFSET, PORT_FORCE_FLOW_CTRL);
+}
+
+/* Spanning Tree */
+
+static inline void port_cfg_dis_learn(struct ksz_hw *hw, int p, int set)
+{
+        port_cfg(hw, p,
+                KS8842_PORT_CTRL_2_OFFSET, PORT_LEARN_DISABLE, set);
+}
+
+static inline void port_cfg_rx(struct ksz_hw *hw, int p, int set)
+{
+        port_cfg(hw, p,
+                KS8842_PORT_CTRL_2_OFFSET, PORT_RX_ENABLE, set);
+}
+
+static inline void port_cfg_tx(struct ksz_hw *hw, int p, int set)
+{
+        port_cfg(hw, p,
+                KS8842_PORT_CTRL_2_OFFSET, PORT_TX_ENABLE, set);
+}
+
+static inline void sw_cfg_fast_aging(struct ksz_hw *hw, int set)
+{
+        sw_cfg(hw, KS8842_SWITCH_CTRL_1_OFFSET, SWITCH_FAST_AGING, set);
+}
+
+static inline void sw_flush_dyn_mac_table(struct ksz_hw *hw)
+{
+        if (!(hw->overrides & FAST_AGING)) {
+                sw_cfg_fast_aging(hw, 1);
+                mdelay(1);
+                sw_cfg_fast_aging(hw, 0);
+        }
+}
+
+/* VLAN */
+
+static inline void port_cfg_ins_tag(struct ksz_hw *hw, int p, int insert)
+{
+        port_cfg(hw, p,
+                KS8842_PORT_CTRL_1_OFFSET, PORT_INSERT_TAG, insert);
+}
+
+static inline void port_cfg_rmv_tag(struct ksz_hw *hw, int p, int remove)
+{
+        port_cfg(hw, p,
+                KS8842_PORT_CTRL_1_OFFSET, PORT_REMOVE_TAG, remove);
+}
+
+static inline int port_chk_ins_tag(struct ksz_hw *hw, int p)
+{
+        return port_chk(hw, p,
+                KS8842_PORT_CTRL_1_OFFSET, PORT_INSERT_TAG);
+}
+
+static inline int port_chk_rmv_tag(struct ksz_hw *hw, int p)
+{
+        return port_chk(hw, p,
+                KS8842_PORT_CTRL_1_OFFSET, PORT_REMOVE_TAG);
+}
+
+static inline void port_cfg_dis_non_vid(struct ksz_hw *hw, int p, int set)
+{
+        port_cfg(hw, p,
+                KS8842_PORT_CTRL_2_OFFSET, PORT_DISCARD_NON_VID, set);
+}
+
+static inline void port_cfg_in_filter(struct ksz_hw *hw, int p, int set)
+{
+        port_cfg(hw, p,
+                KS8842_PORT_CTRL_2_OFFSET, PORT_INGRESS_VLAN_FILTER, set);
+}
+
+static inline int port_chk_dis_non_vid(struct ksz_hw *hw, int p)
+{
+        return port_chk(hw, p,
+                KS8842_PORT_CTRL_2_OFFSET, PORT_DISCARD_NON_VID);
+}
+
+static inline int port_chk_in_filter(struct ksz_hw *hw, int p)
+{
+        return port_chk(hw, p,
+                KS8842_PORT_CTRL_2_OFFSET, PORT_INGRESS_VLAN_FILTER);
+}
+
+/* Mirroring */
+
+static inline void port_cfg_mirror_sniffer(struct ksz_hw *hw, int p, int set)
+{
+        port_cfg(hw, p,
+                KS8842_PORT_CTRL_2_OFFSET, PORT_MIRROR_SNIFFER, set);
+}
+
+static inline void port_cfg_mirror_rx(struct ksz_hw *hw, int p, int set)
+{
+        port_cfg(hw, p,
+                KS8842_PORT_CTRL_2_OFFSET, PORT_MIRROR_RX, set);
+}
+
+static inline void port_cfg_mirror_tx(struct ksz_hw *hw, int p, int set)
+{
+        port_cfg(hw, p,
+                KS8842_PORT_CTRL_2_OFFSET, PORT_MIRROR_TX, set);
+}
+
+static inline void sw_cfg_mirror_rx_tx(struct ksz_hw *hw, int set)
+{
+        sw_cfg(hw, KS8842_SWITCH_CTRL_2_OFFSET, SWITCH_MIRROR_RX_TX, set);
+}
+
+static void sw_init_mirror(struct ksz_hw *hw)
+{
+        int port;
+
+        for (port = 0; port < TOTAL_PORT_NUM; port++) {
+                port_cfg_mirror_sniffer(hw, port, 0);
+                port_cfg_mirror_rx(hw, port, 0);
+                port_cfg_mirror_tx(hw, port, 0);
+        }
+        sw_cfg_mirror_rx_tx(hw, 0);
+}
+
+static inline void sw_cfg_unk_def_deliver(struct ksz_hw *hw, int set)
+{
+        sw_cfg(hw, KS8842_SWITCH_CTRL_7_OFFSET,
+                SWITCH_UNK_DEF_PORT_ENABLE, set);
+}
+
+static inline int sw_cfg_chk_unk_def_deliver(struct ksz_hw *hw)
+{
+        return sw_chk(hw, KS8842_SWITCH_CTRL_7_OFFSET,
+                SWITCH_UNK_DEF_PORT_ENABLE);
+}
+
+static inline void sw_cfg_unk_def_port(struct ksz_hw *hw, int port, int set)
+{
+        port_cfg_shift(hw, port, KS8842_SWITCH_CTRL_7_OFFSET, 0, set);
+}
+
+static inline int sw_chk_unk_def_port(struct ksz_hw *hw, int port)
+{
+        return port_chk_shift(hw, port, KS8842_SWITCH_CTRL_7_OFFSET, 0);
+}
+
+/* Priority */
+
+static inline void port_cfg_diffserv(struct ksz_hw *hw, int p, int set)
+{
+        port_cfg(hw, p,
+                KS8842_PORT_CTRL_1_OFFSET, PORT_DIFFSERV_ENABLE, set);
+}
+
+static inline void port_cfg_802_1p(struct ksz_hw *hw, int p, int set)
+{
+        port_cfg(hw, p,
+                KS8842_PORT_CTRL_1_OFFSET, PORT_802_1P_ENABLE, set);
+}
+
+static inline void port_cfg_replace_vid(struct ksz_hw *hw, int p, int set)
+{
+        port_cfg(hw, p,
+                KS8842_PORT_CTRL_2_OFFSET, PORT_USER_PRIORITY_CEILING, set);
+}
+
+static inline void port_cfg_prio(struct ksz_hw *hw, int p, int set)
+{
+        port_cfg(hw, p,
+                KS8842_PORT_CTRL_1_OFFSET, PORT_PRIO_QUEUE_ENABLE, set);
+}
+
+static inline int port_chk_diffserv(struct ksz_hw *hw, int p)
+{
+        return port_chk(hw, p,
+                KS8842_PORT_CTRL_1_OFFSET, PORT_DIFFSERV_ENABLE);
+}
+
+static inline int port_chk_802_1p(struct ksz_hw *hw, int p)
+{
+        return port_chk(hw, p,
+                KS8842_PORT_CTRL_1_OFFSET, PORT_802_1P_ENABLE);
+}
+
+static inline int port_chk_replace_vid(struct ksz_hw *hw, int p)
+{
+        return port_chk(hw, p,
+                KS8842_PORT_CTRL_2_OFFSET, PORT_USER_PRIORITY_CEILING);
+}
+
+static inline int port_chk_prio(struct ksz_hw *hw, int p)
+{
+        return port_chk(hw, p,
+                KS8842_PORT_CTRL_1_OFFSET, PORT_PRIO_QUEUE_ENABLE);
+}
+
+/**
+ * sw_dis_diffserv - disable switch DiffServ priority
+ * @hw:         The hardware instance.
+ * @port:       The port index.
+ *
+ * This routine disables the DiffServ priority function of the switch.
+ */
+static void sw_dis_diffserv(struct ksz_hw *hw, int port)
+{
+        port_cfg_diffserv(hw, port, 0);
+}
+
+/**
+ * sw_dis_802_1p - disable switch 802.1p priority
+ * @hw:         The hardware instance.
+ * @port:       The port index.
+ *
+ * This routine disables the 802.1p priority function of the switch.
+ */
+static void sw_dis_802_1p(struct ksz_hw *hw, int port)
+{
+        port_cfg_802_1p(hw, port, 0);
+}
+
+/**
+ * sw_cfg_replace_null_vid -
+ * @hw:         The hardware instance.
+ * @set:        The flag to disable or enable.
+ *
+ */
+static void sw_cfg_replace_null_vid(struct ksz_hw *hw, int set)
+{
+        sw_cfg(hw, KS8842_SWITCH_CTRL_3_OFFSET, SWITCH_REPLACE_NULL_VID, set);
+}
+
+/**
+ * sw_cfg_replace_vid - enable switch 802.10 priority re-mapping
+ * @hw:         The hardware instance.
+ * @port:       The port index.
+ * @set:        The flag to disable or enable.
+ *
+ * This routine enables the 802.1p priority re-mapping function of the switch.
+ * That allows 802.1p priority field to be replaced with the port's default
+ * tag's priority value if the ingress packet's 802.1p priority has a higher
+ * priority than port's default tag's priority.
+ */
+static void sw_cfg_replace_vid(struct ksz_hw *hw, int port, int set)
+{
+        port_cfg_replace_vid(hw, port, set);
+}
+
+/**
+ * sw_cfg_port_based - configure switch port based priority
+ * @hw:         The hardware instance.
+ * @port:       The port index.
+ * @prio:       The priority to set.
+ *
+ * This routine configures the port based priority of the switch.
+ */
+static void sw_cfg_port_based(struct ksz_hw *hw, int port, u8 prio)
+{
+        u16 data;
+
+        if (prio > PORT_BASED_PRIORITY_BASE)
+                prio = PORT_BASED_PRIORITY_BASE;
+
+        hw->ksz_switch->port_cfg[port].port_prio = prio;
+
+        port_r16(hw, port, KS8842_PORT_CTRL_1_OFFSET, &data);
+        data &= ~PORT_BASED_PRIORITY_MASK;
+        data |= prio << PORT_BASED_PRIORITY_SHIFT;
+        port_w16(hw, port, KS8842_PORT_CTRL_1_OFFSET, data);
+}
+
+/**
+ * sw_dis_multi_queue - disable transmit multiple queues
+ * @hw:         The hardware instance.
+ * @port:       The port index.
+ *
+ * This routine disables the transmit multiple queues selection of the switch
+ * port.  Only single transmit queue on the port.
+ */
+static void sw_dis_multi_queue(struct ksz_hw *hw, int port)
+{
+        port_cfg_prio(hw, port, 0);
+}
+
+/**
+ * sw_init_prio - initialize switch priority
+ * @hw:         The hardware instance.
+ *
+ * This routine initializes the switch QoS priority functions.
+ */
+static void sw_init_prio(struct ksz_hw *hw)
+{
+        int port;
+        int tos;
+        struct ksz_switch *sw = hw->ksz_switch;
+
+        /*
+         * Init all the 802.1p tag priority value to be assigned to different
+         * priority queue.
+         */
+        sw->p_802_1p[0] = 0;
+        sw->p_802_1p[1] = 0;
+        sw->p_802_1p[2] = 1;
+        sw->p_802_1p[3] = 1;
+        sw->p_802_1p[4] = 2;
+        sw->p_802_1p[5] = 2;
+        sw->p_802_1p[6] = 3;
+        sw->p_802_1p[7] = 3;
+
+        /*
+         * Init all the DiffServ priority value to be assigned to priority
+         * queue 0.
+         */
+        for (tos = 0; tos < DIFFSERV_ENTRIES; tos++)
+                sw->diffserv[tos] = 0;
+
+        /* All QoS functions disabled. */
+        for (port = 0; port < TOTAL_PORT_NUM; port++) {
+                sw_dis_multi_queue(hw, port);
+                sw_dis_diffserv(hw, port);
+                sw_dis_802_1p(hw, port);
+                sw_cfg_replace_vid(hw, port, 0);
+
+                sw->port_cfg[port].port_prio = 0;
+                sw_cfg_port_based(hw, port, sw->port_cfg[port].port_prio);
+        }
+        sw_cfg_replace_null_vid(hw, 0);
+}
+
+/**
+ * port_get_def_vid - get port default VID.
+ * @hw:         The hardware instance.
+ * @port:       The port index.
+ * @vid:        Buffer to store the VID.
+ *
+ * This routine retrieves the default VID of the port.
+ */
+static void port_get_def_vid(struct ksz_hw *hw, int port, u16 *vid)
+{
+        u32 addr;
+
+        PORT_CTRL_ADDR(port, addr);
+        addr += KS8842_PORT_CTRL_VID_OFFSET;
+        *vid = readw(hw->io + addr);
+}
+
+/**
+ * sw_init_vlan - initialize switch VLAN
+ * @hw:         The hardware instance.
+ *
+ * This routine initializes the VLAN function of the switch.
+ */
+static void sw_init_vlan(struct ksz_hw *hw)
+{
+        int port;
+        int entry;
+        struct ksz_switch *sw = hw->ksz_switch;
+
+        /* Read 16 VLAN entries from device's VLAN table. */
+        for (entry = 0; entry < VLAN_TABLE_ENTRIES; entry++) {
+                sw_r_vlan_table(hw, entry,
+                        &sw->vlan_table[entry].vid,
+                        &sw->vlan_table[entry].fid,
+                        &sw->vlan_table[entry].member);
+        }
+
+        for (port = 0; port < TOTAL_PORT_NUM; port++) {
+                port_get_def_vid(hw, port, &sw->port_cfg[port].vid);
+                sw->port_cfg[port].member = PORT_MASK;
+        }
+}
+
+/**
+ * sw_cfg_port_base_vlan - configure port-based VLAN membership
+ * @hw:         The hardware instance.
+ * @port:       The port index.
+ * @member:     The port-based VLAN membership.
+ *
+ * This routine configures the port-based VLAN membership of the port.
+ */
+static void sw_cfg_port_base_vlan(struct ksz_hw *hw, int port, u8 member)
+{
+        u32 addr;
+        u8 data;
+
+        PORT_CTRL_ADDR(port, addr);
+        addr += KS8842_PORT_CTRL_2_OFFSET;
+
+        data = readb(hw->io + addr);
+        data &= ~PORT_VLAN_MEMBERSHIP;
+        data |= (member & PORT_MASK);
+        writeb(data, hw->io + addr);
+
+        hw->ksz_switch->port_cfg[port].member = member;
+}
+
+/**
+ * sw_get_addr - get the switch MAC address.
+ * @hw:         The hardware instance.
+ * @mac_addr:   Buffer to store the MAC address.
+ *
+ * This function retrieves the MAC address of the switch.
+ */
+static inline void sw_get_addr(struct ksz_hw *hw, u8 *mac_addr)
+{
+        int i;
+
+        for (i = 0; i < 6; i += 2) {
+                mac_addr[i] = readb(hw->io + KS8842_MAC_ADDR_0_OFFSET + i);
+                mac_addr[1 + i] = readb(hw->io + KS8842_MAC_ADDR_1_OFFSET + i);
+        }
+}
+
+/**
+ * sw_set_addr - configure switch MAC address
+ * @hw:         The hardware instance.
+ * @mac_addr:   The MAC address.
+ *
+ * This function configures the MAC address of the switch.
+ */
+static void sw_set_addr(struct ksz_hw *hw, u8 *mac_addr)
+{
+        int i;
+
+        for (i = 0; i < 6; i += 2) {
+                writeb(mac_addr[i], hw->io + KS8842_MAC_ADDR_0_OFFSET + i);
+                writeb(mac_addr[1 + i], hw->io + KS8842_MAC_ADDR_1_OFFSET + i);
+        }
+}
+
+/**
+ * sw_set_global_ctrl - set switch global control
+ * @hw:         The hardware instance.
+ *
+ * This routine sets the global control of the switch function.
+ */
+static void sw_set_global_ctrl(struct ksz_hw *hw)
+{
+        u16 data;
+
+        /* Enable switch MII flow control. */
+        data = readw(hw->io + KS8842_SWITCH_CTRL_3_OFFSET);
+        data |= SWITCH_FLOW_CTRL;
+        writew(data, hw->io + KS8842_SWITCH_CTRL_3_OFFSET);
+
+        data = readw(hw->io + KS8842_SWITCH_CTRL_1_OFFSET);
+
+        /* Enable aggressive back off algorithm in half duplex mode. */
+        data |= SWITCH_AGGR_BACKOFF;
+
+        /* Enable automatic fast aging when link changed detected. */
+        data |= SWITCH_AGING_ENABLE;
+        data |= SWITCH_LINK_AUTO_AGING;
+
+        if (hw->overrides & FAST_AGING)
+                data |= SWITCH_FAST_AGING;
+        else
+                data &= ~SWITCH_FAST_AGING;
+        writew(data, hw->io + KS8842_SWITCH_CTRL_1_OFFSET);
+
+        data = readw(hw->io + KS8842_SWITCH_CTRL_2_OFFSET);
+
+        /* Enable no excessive collision drop. */
+        data |= NO_EXC_COLLISION_DROP;
+        writew(data, hw->io + KS8842_SWITCH_CTRL_2_OFFSET);
+}
+
+enum {
+        STP_STATE_DISABLED = 0,
+        STP_STATE_LISTENING,
+        STP_STATE_LEARNING,
+        STP_STATE_FORWARDING,
+        STP_STATE_BLOCKED,
+        STP_STATE_SIMPLE
+};
+
+/**
+ * port_set_stp_state - configure port spanning tree state
+ * @hw:         The hardware instance.
+ * @port:       The port index.
+ * @state:      The spanning tree state.
+ *
+ * This routine configures the spanning tree state of the port.
+ */
+static void port_set_stp_state(struct ksz_hw *hw, int port, int state)
+{
+        u16 data;
+
+        port_r16(hw, port, KS8842_PORT_CTRL_2_OFFSET, &data);
+        switch (state) {
+        case STP_STATE_DISABLED:
+                data &= ~(PORT_TX_ENABLE | PORT_RX_ENABLE);
+                data |= PORT_LEARN_DISABLE;
+                break;
+        case STP_STATE_LISTENING:
+/*
+ * No need to turn on transmit because of port direct mode.
+ * Turning on receive is required if static MAC table is not setup.
+ */
+                data &= ~PORT_TX_ENABLE;
+                data |= PORT_RX_ENABLE;
+                data |= PORT_LEARN_DISABLE;
+                break;
+        case STP_STATE_LEARNING:
+                data &= ~PORT_TX_ENABLE;
+                data |= PORT_RX_ENABLE;
+                data &= ~PORT_LEARN_DISABLE;
+                break;
+        case STP_STATE_FORWARDING:
+                data |= (PORT_TX_ENABLE | PORT_RX_ENABLE);
+                data &= ~PORT_LEARN_DISABLE;
+                break;
+        case STP_STATE_BLOCKED:
+/*
+ * Need to setup static MAC table with override to keep receiving BPDU
+ * messages.  See sw_init_stp routine.
+ */
+                data &= ~(PORT_TX_ENABLE | PORT_RX_ENABLE);
+                data |= PORT_LEARN_DISABLE;
+                break;
+        case STP_STATE_SIMPLE:
+                data |= (PORT_TX_ENABLE | PORT_RX_ENABLE);
+                data |= PORT_LEARN_DISABLE;
+                break;
+        }
+        port_w16(hw, port, KS8842_PORT_CTRL_2_OFFSET, data);
+        hw->ksz_switch->port_cfg[port].stp_state = state;
+}
+
+#define STP_ENTRY                       0
+#define BROADCAST_ENTRY                 1
+#define BRIDGE_ADDR_ENTRY               2
+#define IPV6_ADDR_ENTRY                 3
+
+/**
+ * sw_clr_sta_mac_table - clear static MAC table
+ * @hw:         The hardware instance.
+ *
+ * This routine clears the static MAC table.
+ */
+static void sw_clr_sta_mac_table(struct ksz_hw *hw)
+{
+        struct ksz_mac_table *entry;
+        int i;
+
+        for (i = 0; i < STATIC_MAC_TABLE_ENTRIES; i++) {
+                entry = &hw->ksz_switch->mac_table[i];
+                sw_w_sta_mac_table(hw, i,
+                        entry->mac_addr, entry->ports,
+                        entry->override, 0,
+                        entry->use_fid, entry->fid);
+        }
+}
+
+/**
+ * sw_init_stp - initialize switch spanning tree support
+ * @hw:         The hardware instance.
+ *
+ * This routine initializes the spanning tree support of the switch.
+ */
+static void sw_init_stp(struct ksz_hw *hw)
+{
+        struct ksz_mac_table *entry;
+
+        entry = &hw->ksz_switch->mac_table[STP_ENTRY];
+        entry->mac_addr[0] = 0x01;
+        entry->mac_addr[1] = 0x80;
+        entry->mac_addr[2] = 0xC2;
+        entry->mac_addr[3] = 0x00;
+        entry->mac_addr[4] = 0x00;
+        entry->mac_addr[5] = 0x00;
+        entry->ports = HOST_MASK;
+        entry->override = 1;
+        entry->valid = 1;
+        sw_w_sta_mac_table(hw, STP_ENTRY,
+                entry->mac_addr, entry->ports,
+                entry->override, entry->valid,
+                entry->use_fid, entry->fid);
+}
+
+/**
+ * sw_block_addr - block certain packets from the host port
+ * @hw:         The hardware instance.
+ *
+ * This routine blocks certain packets from reaching to the host port.
+ */
+static void sw_block_addr(struct ksz_hw *hw)
+{
+        struct ksz_mac_table *entry;
+        int i;
+
+        for (i = BROADCAST_ENTRY; i <= IPV6_ADDR_ENTRY; i++) {
+                entry = &hw->ksz_switch->mac_table[i];
+                entry->valid = 0;
+                sw_w_sta_mac_table(hw, i,
+                        entry->mac_addr, entry->ports,
+                        entry->override, entry->valid,
+                        entry->use_fid, entry->fid);
+        }
+}
+
+#define PHY_LINK_SUPPORT                \
+        (PHY_AUTO_NEG_ASYM_PAUSE |      \
+        PHY_AUTO_NEG_SYM_PAUSE |        \
+        PHY_AUTO_NEG_100BT4 |           \
+        PHY_AUTO_NEG_100BTX_FD |        \
+        PHY_AUTO_NEG_100BTX |           \
+        PHY_AUTO_NEG_10BT_FD |          \
+        PHY_AUTO_NEG_10BT)
+
+static inline void hw_r_phy_ctrl(struct ksz_hw *hw, int phy, u16 *data)
+{
+        *data = readw(hw->io + phy + KS884X_PHY_CTRL_OFFSET);
+}
+
+static inline void hw_w_phy_ctrl(struct ksz_hw *hw, int phy, u16 data)
+{
+        writew(data, hw->io + phy + KS884X_PHY_CTRL_OFFSET);
+}
+
+static inline void hw_r_phy_link_stat(struct ksz_hw *hw, int phy, u16 *data)
+{
+        *data = readw(hw->io + phy + KS884X_PHY_STATUS_OFFSET);
+}
+
+static inline void hw_r_phy_auto_neg(struct ksz_hw *hw, int phy, u16 *data)
+{
+        *data = readw(hw->io + phy + KS884X_PHY_AUTO_NEG_OFFSET);
+}
+
+static inline void hw_w_phy_auto_neg(struct ksz_hw *hw, int phy, u16 data)
+{
+        writew(data, hw->io + phy + KS884X_PHY_AUTO_NEG_OFFSET);
+}
+
+static inline void hw_r_phy_rem_cap(struct ksz_hw *hw, int phy, u16 *data)
+{
+        *data = readw(hw->io + phy + KS884X_PHY_REMOTE_CAP_OFFSET);
+}
+
+static inline void hw_r_phy_crossover(struct ksz_hw *hw, int phy, u16 *data)
+{
+        *data = readw(hw->io + phy + KS884X_PHY_CTRL_OFFSET);
+}
+
+static inline void hw_w_phy_crossover(struct ksz_hw *hw, int phy, u16 data)
+{
+        writew(data, hw->io + phy + KS884X_PHY_CTRL_OFFSET);
+}
+
+static inline void hw_r_phy_polarity(struct ksz_hw *hw, int phy, u16 *data)
+{
+        *data = readw(hw->io + phy + KS884X_PHY_PHY_CTRL_OFFSET);
+}
+
+static inline void hw_w_phy_polarity(struct ksz_hw *hw, int phy, u16 data)
+{
+        writew(data, hw->io + phy + KS884X_PHY_PHY_CTRL_OFFSET);
+}
+
+static inline void hw_r_phy_link_md(struct ksz_hw *hw, int phy, u16 *data)
+{
+        *data = readw(hw->io + phy + KS884X_PHY_LINK_MD_OFFSET);
+}
+
+static inline void hw_w_phy_link_md(struct ksz_hw *hw, int phy, u16 data)
+{
+        writew(data, hw->io + phy + KS884X_PHY_LINK_MD_OFFSET);
+}
+
+/**
+ * hw_r_phy - read data from PHY register
+ * @hw:         The hardware instance.
+ * @port:       Port to read.
+ * @reg:        PHY register to read.
+ * @val:        Buffer to store the read data.
+ *
+ * This routine reads data from the PHY register.
+ */
+static void hw_r_phy(struct ksz_hw *hw, int port, u16 reg, u16 *val)
+{
+        int phy;
+
+        phy = KS884X_PHY_1_CTRL_OFFSET + port * PHY_CTRL_INTERVAL + reg;
+        *val = readw(hw->io + phy);
+}
+
+/**
+ * port_w_phy - write data to PHY register
+ * @hw:         The hardware instance.
+ * @port:       Port to write.
+ * @reg:        PHY register to write.
+ * @val:        Word data to write.
+ *
+ * This routine writes data to the PHY register.
+ */
+static void hw_w_phy(struct ksz_hw *hw, int port, u16 reg, u16 val)
+{
+        int phy;
+
+        phy = KS884X_PHY_1_CTRL_OFFSET + port * PHY_CTRL_INTERVAL + reg;
+        writew(val, hw->io + phy);
+}
+
+/*
+ * EEPROM access functions
+ */
+
+#define AT93C_CODE                      0
+#define AT93C_WR_OFF                    0x00
+#define AT93C_WR_ALL                    0x10
+#define AT93C_ER_ALL                    0x20
+#define AT93C_WR_ON                     0x30
+
+#define AT93C_WRITE                     1
+#define AT93C_READ                      2
+#define AT93C_ERASE                     3
+
+#define EEPROM_DELAY                    4
+
+static inline void drop_gpio(struct ksz_hw *hw, u8 gpio)
+{
+        u16 data;
+
+        data = readw(hw->io + KS884X_EEPROM_CTRL_OFFSET);
+        data &= ~gpio;
+        writew(data, hw->io + KS884X_EEPROM_CTRL_OFFSET);
+}
+
+static inline void raise_gpio(struct ksz_hw *hw, u8 gpio)
+{
+        u16 data;
+
+        data = readw(hw->io + KS884X_EEPROM_CTRL_OFFSET);
+        data |= gpio;
+        writew(data, hw->io + KS884X_EEPROM_CTRL_OFFSET);
+}
+
+static inline u8 state_gpio(struct ksz_hw *hw, u8 gpio)
+{
+        u16 data;
+
+        data = readw(hw->io + KS884X_EEPROM_CTRL_OFFSET);
+        return (u8)(data & gpio);
+}
+
+static void eeprom_clk(struct ksz_hw *hw)
+{
+        raise_gpio(hw, EEPROM_SERIAL_CLOCK);
+        udelay(EEPROM_DELAY);
+        drop_gpio(hw, EEPROM_SERIAL_CLOCK);
+        udelay(EEPROM_DELAY);
+}
+
+static u16 spi_r(struct ksz_hw *hw)
+{
+        int i;
+        u16 temp = 0;
+
+        for (i = 15; i >= 0; i--) {
+                raise_gpio(hw, EEPROM_SERIAL_CLOCK);
+                udelay(EEPROM_DELAY);
+
+                temp |= (state_gpio(hw, EEPROM_DATA_IN)) ? 1 << i : 0;
+
+                drop_gpio(hw, EEPROM_SERIAL_CLOCK);
+                udelay(EEPROM_DELAY);
+        }
+        return temp;
+}
+
+static void spi_w(struct ksz_hw *hw, u16 data)
+{
+        int i;
+
+        for (i = 15; i >= 0; i--) {
+                (data & (0x01 << i)) ? raise_gpio(hw, EEPROM_DATA_OUT) :
+                        drop_gpio(hw, EEPROM_DATA_OUT);
+                eeprom_clk(hw);
+        }
+}
+
+static void spi_reg(struct ksz_hw *hw, u8 data, u8 reg)
+{
+        int i;
+
+        /* Initial start bit */
+        raise_gpio(hw, EEPROM_DATA_OUT);
+        eeprom_clk(hw);
+
+        /* AT93C operation */
+        for (i = 1; i >= 0; i--) {
+                (data & (0x01 << i)) ? raise_gpio(hw, EEPROM_DATA_OUT) :
+                        drop_gpio(hw, EEPROM_DATA_OUT);
+                eeprom_clk(hw);
+        }
+
+        /* Address location */
+        for (i = 5; i >= 0; i--) {
+                (reg & (0x01 << i)) ? raise_gpio(hw, EEPROM_DATA_OUT) :
+                        drop_gpio(hw, EEPROM_DATA_OUT);
+                eeprom_clk(hw);
+        }
+}
+
+#define EEPROM_DATA_RESERVED            0
+#define EEPROM_DATA_MAC_ADDR_0          1
+#define EEPROM_DATA_MAC_ADDR_1          2
+#define EEPROM_DATA_MAC_ADDR_2          3
+#define EEPROM_DATA_SUBSYS_ID           4
+#define EEPROM_DATA_SUBSYS_VEN_ID       5
+#define EEPROM_DATA_PM_CAP              6
+
+/* User defined EEPROM data */
+#define EEPROM_DATA_OTHER_MAC_ADDR      9
+
+/**
+ * eeprom_read - read from AT93C46 EEPROM
+ * @hw:         The hardware instance.
+ * @reg:        The register offset.
+ *
+ * This function reads a word from the AT93C46 EEPROM.
+ *
+ * Return the data value.
+ */
+static u16 eeprom_read(struct ksz_hw *hw, u8 reg)
+{
+        u16 data;
+
+        raise_gpio(hw, EEPROM_ACCESS_ENABLE | EEPROM_CHIP_SELECT);
+
+        spi_reg(hw, AT93C_READ, reg);
+        data = spi_r(hw);
+
+        drop_gpio(hw, EEPROM_ACCESS_ENABLE | EEPROM_CHIP_SELECT);
+
+        return data;
+}
+
+/**
+ * eeprom_write - write to AT93C46 EEPROM
+ * @hw:         The hardware instance.
+ * @reg:        The register offset.
+ * @data:       The data value.
+ *
+ * This procedure writes a word to the AT93C46 EEPROM.
+ */
+static void eeprom_write(struct ksz_hw *hw, u8 reg, u16 data)
+{
+        int timeout;
+
+        raise_gpio(hw, EEPROM_ACCESS_ENABLE | EEPROM_CHIP_SELECT);
+
+        /* Enable write. */
+        spi_reg(hw, AT93C_CODE, AT93C_WR_ON);
+        drop_gpio(hw, EEPROM_CHIP_SELECT);
+        udelay(1);
+
+        /* Erase the register. */
+        raise_gpio(hw, EEPROM_CHIP_SELECT);
+        spi_reg(hw, AT93C_ERASE, reg);
+        drop_gpio(hw, EEPROM_CHIP_SELECT);
+        udelay(1);
+
+        /* Check operation complete. */
+        raise_gpio(hw, EEPROM_CHIP_SELECT);
+        timeout = 8;
+        mdelay(2);
+        do {
+                mdelay(1);
+        } while (!state_gpio(hw, EEPROM_DATA_IN) && --timeout);
+        drop_gpio(hw, EEPROM_CHIP_SELECT);
+        udelay(1);
+
+        /* Write the register. */
+        raise_gpio(hw, EEPROM_CHIP_SELECT);
+        spi_reg(hw, AT93C_WRITE, reg);
+        spi_w(hw, data);
+        drop_gpio(hw, EEPROM_CHIP_SELECT);
+        udelay(1);
+
+        /* Check operation complete. */
+        raise_gpio(hw, EEPROM_CHIP_SELECT);
+        timeout = 8;
+        mdelay(2);
+        do {
+                mdelay(1);
+        } while (!state_gpio(hw, EEPROM_DATA_IN) && --timeout);
+        drop_gpio(hw, EEPROM_CHIP_SELECT);
+        udelay(1);
+
+        /* Disable write. */
+        raise_gpio(hw, EEPROM_CHIP_SELECT);
+        spi_reg(hw, AT93C_CODE, AT93C_WR_OFF);
+
+        drop_gpio(hw, EEPROM_ACCESS_ENABLE | EEPROM_CHIP_SELECT);
+}
+
+/*
+ * Link detection routines
+ */
+
+static u16 advertised_flow_ctrl(struct ksz_port *port, u16 ctrl)
+{
+        ctrl &= ~PORT_AUTO_NEG_SYM_PAUSE;
+        switch (port->flow_ctrl) {
+        case PHY_FLOW_CTRL:
+                ctrl |= PORT_AUTO_NEG_SYM_PAUSE;
+                break;
+        /* Not supported. */
+        case PHY_TX_ONLY:
+        case PHY_RX_ONLY:
+        default:
+                break;
+        }
+        return ctrl;
+}
+
+static void set_flow_ctrl(struct ksz_hw *hw, int rx, int tx)
+{
+        u32 rx_cfg;
+        u32 tx_cfg;
+
+        rx_cfg = hw->rx_cfg;
+        tx_cfg = hw->tx_cfg;
+        if (rx)
+                hw->rx_cfg |= DMA_RX_FLOW_ENABLE;
+        else
+                hw->rx_cfg &= ~DMA_RX_FLOW_ENABLE;
+        if (tx)
+                hw->tx_cfg |= DMA_TX_FLOW_ENABLE;
+        else
+                hw->tx_cfg &= ~DMA_TX_FLOW_ENABLE;
+        if (hw->enabled) {
+                if (rx_cfg != hw->rx_cfg)
+                        writel(hw->rx_cfg, hw->io + KS_DMA_RX_CTRL);
+                if (tx_cfg != hw->tx_cfg)
+                        writel(hw->tx_cfg, hw->io + KS_DMA_TX_CTRL);
+        }
+}
+
+static void determine_flow_ctrl(struct ksz_hw *hw, struct ksz_port *port,
+        u16 local, u16 remote)
+{
+        int rx;
+        int tx;
+
+        if (hw->overrides & PAUSE_FLOW_CTRL)
+                return;
+
+        rx = tx = 0;
+        if (port->force_link)
+                rx = tx = 1;
+        if (remote & PHY_AUTO_NEG_SYM_PAUSE) {
+                if (local & PHY_AUTO_NEG_SYM_PAUSE) {
+                        rx = tx = 1;
+                } else if ((remote & PHY_AUTO_NEG_ASYM_PAUSE) &&
+                                (local & PHY_AUTO_NEG_PAUSE) ==
+                                PHY_AUTO_NEG_ASYM_PAUSE) {
+                        tx = 1;
+                }
+        } else if (remote & PHY_AUTO_NEG_ASYM_PAUSE) {
+                if ((local & PHY_AUTO_NEG_PAUSE) == PHY_AUTO_NEG_PAUSE)
+                        rx = 1;
+        }
+        if (!hw->ksz_switch)
+                set_flow_ctrl(hw, rx, tx);
+}
+
+static inline void port_cfg_change(struct ksz_hw *hw, struct ksz_port *port,
+        struct ksz_port_info *info, u16 link_status)
+{
+        if ((hw->features & HALF_DUPLEX_SIGNAL_BUG) &&
+                        !(hw->overrides & PAUSE_FLOW_CTRL)) {
+                u32 cfg = hw->tx_cfg;
+
+                /* Disable flow control in the half duplex mode. */
+                if (1 == info->duplex)
+                        hw->tx_cfg &= ~DMA_TX_FLOW_ENABLE;
+                if (hw->enabled && cfg != hw->tx_cfg)
+                        writel(hw->tx_cfg, hw->io + KS_DMA_TX_CTRL);
+        }
+}
+
+/**
+ * port_get_link_speed - get current link status
+ * @port:       The port instance.
+ *
+ * This routine reads PHY registers to determine the current link status of the
+ * switch ports.
+ */
+static void port_get_link_speed(struct ksz_port *port)
+{
+        uint interrupt;
+        struct ksz_port_info *info;
+        struct ksz_port_info *linked = NULL;
+        struct ksz_hw *hw = port->hw;
+        u16 data;
+        u16 status;
+        u8 local;
+        u8 remote;
+        int i;
+        int p;
+        int change = 0;
+
+        interrupt = hw_block_intr(hw);
+
+        for (i = 0, p = port->first_port; i < port->port_cnt; i++, p++) {
+                info = &hw->port_info[p];
+                port_r16(hw, p, KS884X_PORT_CTRL_4_OFFSET, &data);
+                port_r16(hw, p, KS884X_PORT_STATUS_OFFSET, &status);
+
+                /*
+                 * Link status is changing all the time even when there is no
+                 * cable connection!
+                 */
+                remote = status & (PORT_AUTO_NEG_COMPLETE |
+                        PORT_STATUS_LINK_GOOD);
+                local = (u8) data;
+
+                /* No change to status. */
+                if (local == info->advertised && remote == info->partner)
+                        continue;
+
+                info->advertised = local;
+                info->partner = remote;
+                if (status & PORT_STATUS_LINK_GOOD) {
+
+                        /* Remember the first linked port. */
+                        if (!linked)
+                                linked = info;
+
+                        info->tx_rate = 10 * TX_RATE_UNIT;
+                        if (status & PORT_STATUS_SPEED_100MBIT)
+                                info->tx_rate = 100 * TX_RATE_UNIT;
+
+                        info->duplex = 1;
+                        if (status & PORT_STATUS_FULL_DUPLEX)
+                                info->duplex = 2;
+
+                        if (media_connected != info->state) {
+                                hw_r_phy(hw, p, KS884X_PHY_AUTO_NEG_OFFSET,
+                                        &data);
+                                hw_r_phy(hw, p, KS884X_PHY_REMOTE_CAP_OFFSET,
+                                        &status);
+                                determine_flow_ctrl(hw, port, data, status);
+                                if (hw->ksz_switch) {
+                                        port_cfg_back_pressure(hw, p,
+                                                (1 == info->duplex));
+                                }
+                                change |= 1 << i;
+                                port_cfg_change(hw, port, info, status);
+                        }
+                        info->state = media_connected;
+                } else {
+                        if (media_disconnected != info->state) {
+                                change |= 1 << i;
+
+                                /* Indicate the link just goes down. */
+                                hw->port_mib[p].link_down = 1;
+                        }
+                        info->state = media_disconnected;
+                }
+                hw->port_mib[p].state = (u8) info->state;
+        }
+
+        if (linked && media_disconnected == port->linked->state)
+                port->linked = linked;
+
+        hw_restore_intr(hw, interrupt);
+}
+
+#define PHY_RESET_TIMEOUT               10
+
+/**
+ * port_set_link_speed - set port speed
+ * @port:       The port instance.
+ *
+ * This routine sets the link speed of the switch ports.
+ */
+static void port_set_link_speed(struct ksz_port *port)
+{
+        struct ksz_port_info *info;
+        struct ksz_hw *hw = port->hw;
+        u16 data;
+        u16 cfg;
+        u8 status;
+        int i;
+        int p;
+
+        for (i = 0, p = port->first_port; i < port->port_cnt; i++, p++) {
+                info = &hw->port_info[p];
+
+                port_r16(hw, p, KS884X_PORT_CTRL_4_OFFSET, &data);
+                port_r8(hw, p, KS884X_PORT_STATUS_OFFSET, &status);
+
+                cfg = 0;
+                if (status & PORT_STATUS_LINK_GOOD)
+                        cfg = data;
+
+                data |= PORT_AUTO_NEG_ENABLE;
+                data = advertised_flow_ctrl(port, data);
+
+                data |= PORT_AUTO_NEG_100BTX_FD | PORT_AUTO_NEG_100BTX |
+                        PORT_AUTO_NEG_10BT_FD | PORT_AUTO_NEG_10BT;
+
+                /* Check if manual configuration is specified by the user. */
+                if (port->speed || port->duplex) {
+                        if (10 == port->speed)
+                                data &= ~(PORT_AUTO_NEG_100BTX_FD |
+                                        PORT_AUTO_NEG_100BTX);
+                        else if (100 == port->speed)
+                                data &= ~(PORT_AUTO_NEG_10BT_FD |
+                                        PORT_AUTO_NEG_10BT);
+                        if (1 == port->duplex)
+                                data &= ~(PORT_AUTO_NEG_100BTX_FD |
+                                        PORT_AUTO_NEG_10BT_FD);
+                        else if (2 == port->duplex)
+                                data &= ~(PORT_AUTO_NEG_100BTX |
+                                        PORT_AUTO_NEG_10BT);
+                }
+                if (data != cfg) {
+                        data |= PORT_AUTO_NEG_RESTART;
+                        port_w16(hw, p, KS884X_PORT_CTRL_4_OFFSET, data);
+                }
+        }
+}
+
+/**
+ * port_force_link_speed - force port speed
+ * @port:       The port instance.
+ *
+ * This routine forces the link speed of the switch ports.
+ */
+static void port_force_link_speed(struct ksz_port *port)
+{
+        struct ksz_hw *hw = port->hw;
+        u16 data;
+        int i;
+        int phy;
+        int p;
+
+        for (i = 0, p = port->first_port; i < port->port_cnt; i++, p++) {
+                phy = KS884X_PHY_1_CTRL_OFFSET + p * PHY_CTRL_INTERVAL;
+                hw_r_phy_ctrl(hw, phy, &data);
+
+                data &= ~PHY_AUTO_NEG_ENABLE;
+
+                if (10 == port->speed)
+                        data &= ~PHY_SPEED_100MBIT;
+                else if (100 == port->speed)
+                        data |= PHY_SPEED_100MBIT;
+                if (1 == port->duplex)
+                        data &= ~PHY_FULL_DUPLEX;
+                else if (2 == port->duplex)
+                        data |= PHY_FULL_DUPLEX;
+                hw_w_phy_ctrl(hw, phy, data);
+        }
+}
+
+static void port_set_power_saving(struct ksz_port *port, int enable)
+{
+        struct ksz_hw *hw = port->hw;
+        int i;
+        int p;
+
+        for (i = 0, p = port->first_port; i < port->port_cnt; i++, p++)
+                port_cfg(hw, p,
+                        KS884X_PORT_CTRL_4_OFFSET, PORT_POWER_DOWN, enable);
+}
+
+/*
+ * KSZ8841 power management functions
+ */
+
+/**
+ * hw_chk_wol_pme_status - check PMEN pin
+ * @hw:         The hardware instance.
+ *
+ * This function is used to check PMEN pin is asserted.
+ *
+ * Return 1 if PMEN pin is asserted; otherwise, 0.
+ */
+static int hw_chk_wol_pme_status(struct ksz_hw *hw)
+{
+        struct dev_info *hw_priv = container_of(hw, struct dev_info, hw);
+        struct pci_dev *pdev = hw_priv->pdev;
+        u16 data;
+
+        if (!pdev->pm_cap)
+                return 0;
+        pci_read_config_word(pdev, pdev->pm_cap + PCI_PM_CTRL, &data);
+        return (data & PCI_PM_CTRL_PME_STATUS) == PCI_PM_CTRL_PME_STATUS;
+}
+
+/**
+ * hw_clr_wol_pme_status - clear PMEN pin
+ * @hw:         The hardware instance.
+ *
+ * This routine is used to clear PME_Status to deassert PMEN pin.
+ */
+static void hw_clr_wol_pme_status(struct ksz_hw *hw)
+{
+        struct dev_info *hw_priv = container_of(hw, struct dev_info, hw);
+        struct pci_dev *pdev = hw_priv->pdev;
+        u16 data;
+
+        if (!pdev->pm_cap)
+                return;
+
+        /* Clear PME_Status to deassert PMEN pin. */
+        pci_read_config_word(pdev, pdev->pm_cap + PCI_PM_CTRL, &data);
+        data |= PCI_PM_CTRL_PME_STATUS;
+        pci_write_config_word(pdev, pdev->pm_cap + PCI_PM_CTRL, data);
+}
+
+/**
+ * hw_cfg_wol_pme - enable or disable Wake-on-LAN
+ * @hw:         The hardware instance.
+ * @set:        The flag indicating whether to enable or disable.
+ *
+ * This routine is used to enable or disable Wake-on-LAN.
+ */
+static void hw_cfg_wol_pme(struct ksz_hw *hw, int set)
+{
+        struct dev_info *hw_priv = container_of(hw, struct dev_info, hw);
+        struct pci_dev *pdev = hw_priv->pdev;
+        u16 data;
+
+        if (!pdev->pm_cap)
+                return;
+        pci_read_config_word(pdev, pdev->pm_cap + PCI_PM_CTRL, &data);
+        data &= ~PCI_PM_CTRL_STATE_MASK;
+        if (set)
+                data |= PCI_PM_CTRL_PME_ENABLE | PCI_D3hot;
+        else
+                data &= ~PCI_PM_CTRL_PME_ENABLE;
+        pci_write_config_word(pdev, pdev->pm_cap + PCI_PM_CTRL, data);
+}
+
+/**
+ * hw_cfg_wol - configure Wake-on-LAN features
+ * @hw:         The hardware instance.
+ * @frame:      The pattern frame bit.
+ * @set:        The flag indicating whether to enable or disable.
+ *
+ * This routine is used to enable or disable certain Wake-on-LAN features.
+ */
+static void hw_cfg_wol(struct ksz_hw *hw, u16 frame, int set)
+{
+        u16 data;
+
+        data = readw(hw->io + KS8841_WOL_CTRL_OFFSET);
+        if (set)
+                data |= frame;
+        else
+                data &= ~frame;
+        writew(data, hw->io + KS8841_WOL_CTRL_OFFSET);
+}
+
+/**
+ * hw_set_wol_frame - program Wake-on-LAN pattern
+ * @hw:         The hardware instance.
+ * @i:          The frame index.
+ * @mask_size:  The size of the mask.
+ * @mask:       Mask to ignore certain bytes in the pattern.
+ * @frame_size: The size of the frame.
+ * @pattern:    The frame data.
+ *
+ * This routine is used to program Wake-on-LAN pattern.
+ */
+static void hw_set_wol_frame(struct ksz_hw *hw, int i, uint mask_size,
+        u8 *mask, uint frame_size, u8 *pattern)
+{
+        int bits;
+        int from;
+        int len;
+        int to;
+        u32 crc;
+        u8 data[64];
+        u8 val = 0;
+
+        if (frame_size > mask_size * 8)
+                frame_size = mask_size * 8;
+        if (frame_size > 64)
+                frame_size = 64;
+
+        i *= 0x10;
+        writel(0, hw->io + KS8841_WOL_FRAME_BYTE0_OFFSET + i);
+        writel(0, hw->io + KS8841_WOL_FRAME_BYTE2_OFFSET + i);
+
+        bits = len = from = to = 0;
+        do {
+                if (bits) {
+                        if ((val & 1))
+                                data[to++] = pattern[from];
+                        val >>= 1;
+                        ++from;
+                        --bits;
+                } else {
+                        val = mask[len];
+                        writeb(val, hw->io + KS8841_WOL_FRAME_BYTE0_OFFSET + i
+                                + len);
+                        ++len;
+                        if (val)
+                                bits = 8;
+                        else
+                                from += 8;
+                }
+        } while (from < (int) frame_size);
+        if (val) {
+                bits = mask[len - 1];
+                val <<= (from % 8);
+                bits &= ~val;
+                writeb(bits, hw->io + KS8841_WOL_FRAME_BYTE0_OFFSET + i + len -
+                        1);
+        }
+        crc = ether_crc(to, data);
+        writel(crc, hw->io + KS8841_WOL_FRAME_CRC_OFFSET + i);
+}
+
+/**
+ * hw_add_wol_arp - add ARP pattern
+ * @hw:         The hardware instance.
+ * @ip_addr:    The IPv4 address assigned to the device.
+ *
+ * This routine is used to add ARP pattern for waking up the host.
+ */
+static void hw_add_wol_arp(struct ksz_hw *hw, u8 *ip_addr)
+{
+        u8 mask[6] = { 0x3F, 0xF0, 0x3F, 0x00, 0xC0, 0x03 };
+        u8 pattern[42] = {
+                0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+                0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+                0x08, 0x06,
+                0x00, 0x01, 0x08, 0x00, 0x06, 0x04, 0x00, 0x01,
+                0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+                0x00, 0x00, 0x00, 0x00,
+                0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+                0x00, 0x00, 0x00, 0x00 };
+
+        memcpy(&pattern[38], ip_addr, 4);
+        hw_set_wol_frame(hw, 3, 6, mask, 42, pattern);
+}
+
+/**
+ * hw_add_wol_bcast - add broadcast pattern
+ * @hw:         The hardware instance.
+ *
+ * This routine is used to add broadcast pattern for waking up the host.
+ */
+static void hw_add_wol_bcast(struct ksz_hw *hw)
+{
+        u8 mask[] = { 0x3F };
+        u8 pattern[] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF };
+
+        hw_set_wol_frame(hw, 2, 1, mask, MAC_ADDR_LEN, pattern);
+}
+
+/**
+ * hw_add_wol_mcast - add multicast pattern
+ * @hw:         The hardware instance.
+ *
+ * This routine is used to add multicast pattern for waking up the host.
+ *
+ * It is assumed the multicast packet is the ICMPv6 neighbor solicitation used
+ * by IPv6 ping command.  Note that multicast packets are filtred through the
+ * multicast hash table, so not all multicast packets can wake up the host.
+ */
+static void hw_add_wol_mcast(struct ksz_hw *hw)
+{
+        u8 mask[] = { 0x3F };
+        u8 pattern[] = { 0x33, 0x33, 0xFF, 0x00, 0x00, 0x00 };
+
+        memcpy(&pattern[3], &hw->override_addr[3], 3);
+        hw_set_wol_frame(hw, 1, 1, mask, 6, pattern);
+}
+
+/**
+ * hw_add_wol_ucast - add unicast pattern
+ * @hw:         The hardware instance.
+ *
+ * This routine is used to add unicast pattern to wakeup the host.
+ *
+ * It is assumed the unicast packet is directed to the device, as the hardware
+ * can only receive them in normal case.
+ */
+static void hw_add_wol_ucast(struct ksz_hw *hw)
+{
+        u8 mask[] = { 0x3F };
+
+        hw_set_wol_frame(hw, 0, 1, mask, MAC_ADDR_LEN, hw->override_addr);
+}
+
+/**
+ * hw_enable_wol - enable Wake-on-LAN
+ * @hw:         The hardware instance.
+ * @wol_enable: The Wake-on-LAN settings.
+ * @net_addr:   The IPv4 address assigned to the device.
+ *
+ * This routine is used to enable Wake-on-LAN depending on driver settings.
+ */
+static void hw_enable_wol(struct ksz_hw *hw, u32 wol_enable, u8 *net_addr)
+{
+        hw_cfg_wol(hw, KS8841_WOL_MAGIC_ENABLE, (wol_enable & WAKE_MAGIC));
+        hw_cfg_wol(hw, KS8841_WOL_FRAME0_ENABLE, (wol_enable & WAKE_UCAST));
+        hw_add_wol_ucast(hw);
+        hw_cfg_wol(hw, KS8841_WOL_FRAME1_ENABLE, (wol_enable & WAKE_MCAST));
+        hw_add_wol_mcast(hw);
+        hw_cfg_wol(hw, KS8841_WOL_FRAME2_ENABLE, (wol_enable & WAKE_BCAST));
+        hw_cfg_wol(hw, KS8841_WOL_FRAME3_ENABLE, (wol_enable & WAKE_ARP));
+        hw_add_wol_arp(hw, net_addr);
+}
+
+/**
+ * hw_init - check driver is correct for the hardware
+ * @hw:         The hardware instance.
+ *
+ * This function checks the hardware is correct for this driver and sets the
+ * hardware up for proper initialization.
+ *
+ * Return number of ports or 0 if not right.
+ */
+static int hw_init(struct ksz_hw *hw)
+{
+        int rc = 0;
+        u16 data;
+        u16 revision;
+
+        /* Set bus speed to 125MHz. */
+        writew(BUS_SPEED_125_MHZ, hw->io + KS884X_BUS_CTRL_OFFSET);
+
+        /* Check KSZ884x chip ID. */
+        data = readw(hw->io + KS884X_CHIP_ID_OFFSET);
+
+        revision = (data & KS884X_REVISION_MASK) >> KS884X_REVISION_SHIFT;
+        data &= KS884X_CHIP_ID_MASK_41;
+        if (REG_CHIP_ID_41 == data)
+                rc = 1;
+        else if (REG_CHIP_ID_42 == data)
+                rc = 2;
+        else
+                return 0;
+
+        /* Setup hardware features or bug workarounds. */
+        if (revision <= 1) {
+                hw->features |= SMALL_PACKET_TX_BUG;
+                if (1 == rc)
+                        hw->features |= HALF_DUPLEX_SIGNAL_BUG;
+        }
+        hw->features |= IPV6_CSUM_GEN_HACK;
+        return rc;
+}
+
+/**
+ * hw_reset - reset the hardware
+ * @hw:         The hardware instance.
+ *
+ * This routine resets the hardware.
+ */
+static void hw_reset(struct ksz_hw *hw)
+{
+        writew(GLOBAL_SOFTWARE_RESET, hw->io + KS884X_GLOBAL_CTRL_OFFSET);
+
+        /* Wait for device to reset. */
+        mdelay(10);
+
+        /* Write 0 to clear device reset. */
+        writew(0, hw->io + KS884X_GLOBAL_CTRL_OFFSET);
+}
+
+/**
+ * hw_setup - setup the hardware
+ * @hw:         The hardware instance.
+ *
+ * This routine setup the hardware for proper operation.
+ */
+static void hw_setup(struct ksz_hw *hw)
+{
+#if SET_DEFAULT_LED
+        u16 data;
+
+        /* Change default LED mode. */
+        data = readw(hw->io + KS8842_SWITCH_CTRL_5_OFFSET);
+        data &= ~LED_MODE;
+        data |= SET_DEFAULT_LED;
+        writew(data, hw->io + KS8842_SWITCH_CTRL_5_OFFSET);
+#endif
+
+        /* Setup transmit control. */
+        hw->tx_cfg = (DMA_TX_PAD_ENABLE | DMA_TX_CRC_ENABLE |
+                (DMA_BURST_DEFAULT << DMA_BURST_SHIFT) | DMA_TX_ENABLE);
+
+        /* Setup receive control. */
+        hw->rx_cfg = (DMA_RX_BROADCAST | DMA_RX_UNICAST |
+                (DMA_BURST_DEFAULT << DMA_BURST_SHIFT) | DMA_RX_ENABLE);
+        hw->rx_cfg |= KS884X_DMA_RX_MULTICAST;
+
+        /* Hardware cannot handle UDP packet in IP fragments. */
+        hw->rx_cfg |= (DMA_RX_CSUM_TCP | DMA_RX_CSUM_IP);
+
+        if (hw->all_multi)
+                hw->rx_cfg |= DMA_RX_ALL_MULTICAST;
+        if (hw->promiscuous)
+                hw->rx_cfg |= DMA_RX_PROMISCUOUS;
+}
+
+/**
+ * hw_setup_intr - setup interrupt mask
+ * @hw:         The hardware instance.
+ *
+ * This routine setup the interrupt mask for proper operation.
+ */
+static void hw_setup_intr(struct ksz_hw *hw)
+{
+        hw->intr_mask = KS884X_INT_MASK | KS884X_INT_RX_OVERRUN;
+}
+
+static void ksz_check_desc_num(struct ksz_desc_info *info)
+{
+#define MIN_DESC_SHIFT  2
+
+        int alloc = info->alloc;
+        int shift;
+
+        shift = 0;
+        while (!(alloc & 1)) {
+                shift++;
+                alloc >>= 1;
+        }
+        if (alloc != 1 || shift < MIN_DESC_SHIFT) {
+                printk(KERN_ALERT "Hardware descriptor numbers not right!\n");
+                while (alloc) {
+                        shift++;
+                        alloc >>= 1;
+                }
+                if (shift < MIN_DESC_SHIFT)
+                        shift = MIN_DESC_SHIFT;
+                alloc = 1 << shift;
+                info->alloc = alloc;
+        }
+        info->mask = info->alloc - 1;
+}
+
+static void hw_init_desc(struct ksz_desc_info *desc_info, int transmit)
+{
+        int i;
+        u32 phys = desc_info->ring_phys;
+        struct ksz_hw_desc *desc = desc_info->ring_virt;
+        struct ksz_desc *cur = desc_info->ring;
+        struct ksz_desc *previous = NULL;
+
+        for (i = 0; i < desc_info->alloc; i++) {
+                cur->phw = desc++;
+                phys += desc_info->size;
+                previous = cur++;
+                previous->phw->next = cpu_to_le32(phys);
+        }
+        previous->phw->next = cpu_to_le32(desc_info->ring_phys);
+        previous->sw.buf.rx.end_of_ring = 1;
+        previous->phw->buf.data = cpu_to_le32(previous->sw.buf.data);
+
+        desc_info->avail = desc_info->alloc;
+        desc_info->last = desc_info->next = 0;
+
+        desc_info->cur = desc_info->ring;
+}
+
+/**
+ * hw_set_desc_base - set descriptor base addresses
+ * @hw:         The hardware instance.
+ * @tx_addr:    The transmit descriptor base.
+ * @rx_addr:    The receive descriptor base.
+ *
+ * This routine programs the descriptor base addresses after reset.
+ */
+static void hw_set_desc_base(struct ksz_hw *hw, u32 tx_addr, u32 rx_addr)
+{
+        /* Set base address of Tx/Rx descriptors. */
+        writel(tx_addr, hw->io + KS_DMA_TX_ADDR);
+        writel(rx_addr, hw->io + KS_DMA_RX_ADDR);
+}
+
+static void hw_reset_pkts(struct ksz_desc_info *info)
+{
+        info->cur = info->ring;
+        info->avail = info->alloc;
+        info->last = info->next = 0;
+}
+
+static inline void hw_resume_rx(struct ksz_hw *hw)
+{
+        writel(DMA_START, hw->io + KS_DMA_RX_START);
+}
+
+/**
+ * hw_start_rx - start receiving
+ * @hw:         The hardware instance.
+ *
+ * This routine starts the receive function of the hardware.
+ */
+static void hw_start_rx(struct ksz_hw *hw)
+{
+        writel(hw->rx_cfg, hw->io + KS_DMA_RX_CTRL);
+
+        /* Notify when the receive stops. */
+        hw->intr_mask |= KS884X_INT_RX_STOPPED;
+
+        writel(DMA_START, hw->io + KS_DMA_RX_START);
+        hw_ack_intr(hw, KS884X_INT_RX_STOPPED);
+        hw->rx_stop++;
+
+        /* Variable overflows. */
+        if (0 == hw->rx_stop)
+                hw->rx_stop = 2;
+}
+
+/*
+ * hw_stop_rx - stop receiving
+ * @hw:         The hardware instance.
+ *
+ * This routine stops the receive function of the hardware.
+ */
+static void hw_stop_rx(struct ksz_hw *hw)
+{
+        hw->rx_stop = 0;
+        hw_turn_off_intr(hw, KS884X_INT_RX_STOPPED);
+        writel((hw->rx_cfg & ~DMA_RX_ENABLE), hw->io + KS_DMA_RX_CTRL);
+}
+
+/**
+ * hw_start_tx - start transmitting
+ * @hw:         The hardware instance.
+ *
+ * This routine starts the transmit function of the hardware.
+ */
+static void hw_start_tx(struct ksz_hw *hw)
+{
+        writel(hw->tx_cfg, hw->io + KS_DMA_TX_CTRL);
+}
+
+/**
+ * hw_stop_tx - stop transmitting
+ * @hw:         The hardware instance.
+ *
+ * This routine stops the transmit function of the hardware.
+ */
+static void hw_stop_tx(struct ksz_hw *hw)
+{
+        writel((hw->tx_cfg & ~DMA_TX_ENABLE), hw->io + KS_DMA_TX_CTRL);
+}
+
+/**
+ * hw_disable - disable hardware
+ * @hw:         The hardware instance.
+ *
+ * This routine disables the hardware.
+ */
+static void hw_disable(struct ksz_hw *hw)
+{
+        hw_stop_rx(hw);
+        hw_stop_tx(hw);
+        hw->enabled = 0;
+}
+
+/**
+ * hw_enable - enable hardware
+ * @hw:         The hardware instance.
+ *
+ * This routine enables the hardware.
+ */
+static void hw_enable(struct ksz_hw *hw)
+{
+        hw_start_tx(hw);
+        hw_start_rx(hw);
+        hw->enabled = 1;
+}
+
+/**
+ * hw_alloc_pkt - allocate enough descriptors for transmission
+ * @hw:         The hardware instance.
+ * @length:     The length of the packet.
+ * @physical:   Number of descriptors required.
+ *
+ * This function allocates descriptors for transmission.
+ *
+ * Return 0 if not successful; 1 for buffer copy; or number of descriptors.
+ */
+static int hw_alloc_pkt(struct ksz_hw *hw, int length, int physical)
+{
+        /* Always leave one descriptor free. */
+        if (hw->tx_desc_info.avail <= 1)
+                return 0;
+
+        /* Allocate a descriptor for transmission and mark it current. */
+        get_tx_pkt(&hw->tx_desc_info, &hw->tx_desc_info.cur);
+        hw->tx_desc_info.cur->sw.buf.tx.first_seg = 1;
+
+        /* Keep track of number of transmit descriptors used so far. */
+        ++hw->tx_int_cnt;
+        hw->tx_size += length;
+
+        /* Cannot hold on too much data. */
+        if (hw->tx_size >= MAX_TX_HELD_SIZE)
+                hw->tx_int_cnt = hw->tx_int_mask + 1;
+
+        if (physical > hw->tx_desc_info.avail)
+                return 1;
+
+        return hw->tx_desc_info.avail;
+}
+
+/**
+ * hw_send_pkt - mark packet for transmission
+ * @hw:         The hardware instance.
+ *
+ * This routine marks the packet for transmission in PCI version.
+ */
+static void hw_send_pkt(struct ksz_hw *hw)
+{
+        struct ksz_desc *cur = hw->tx_desc_info.cur;
+
+        cur->sw.buf.tx.last_seg = 1;
+
+        /* Interrupt only after specified number of descriptors used. */
+        if (hw->tx_int_cnt > hw->tx_int_mask) {
+                cur->sw.buf.tx.intr = 1;
+                hw->tx_int_cnt = 0;
+                hw->tx_size = 0;
+        }
+
+        /* KSZ8842 supports port directed transmission. */
+        cur->sw.buf.tx.dest_port = hw->dst_ports;
+
+        release_desc(cur);
+
+        writel(0, hw->io + KS_DMA_TX_START);
+}
+
+static int empty_addr(u8 *addr)
+{
+        u32 *addr1 = (u32 *) addr;
+        u16 *addr2 = (u16 *) &addr[4];
+
+        return 0 == *addr1 && 0 == *addr2;
+}
+
+/**
+ * hw_set_addr - set MAC address
+ * @hw:         The hardware instance.
+ *
+ * This routine programs the MAC address of the hardware when the address is
+ * overrided.
+ */
+static void hw_set_addr(struct ksz_hw *hw)
+{
+        int i;
+
+        for (i = 0; i < MAC_ADDR_LEN; i++)
+                writeb(hw->override_addr[MAC_ADDR_ORDER(i)],
+                        hw->io + KS884X_ADDR_0_OFFSET + i);
+
+        sw_set_addr(hw, hw->override_addr);
+}
+
+/**
+ * hw_read_addr - read MAC address
+ * @hw:         The hardware instance.
+ *
+ * This routine retrieves the MAC address of the hardware.
+ */
+static void hw_read_addr(struct ksz_hw *hw)
+{
+        int i;
+
+        for (i = 0; i < MAC_ADDR_LEN; i++)
+                hw->perm_addr[MAC_ADDR_ORDER(i)] = readb(hw->io +
+                        KS884X_ADDR_0_OFFSET + i);
+
+        if (!hw->mac_override) {
+                memcpy(hw->override_addr, hw->perm_addr, MAC_ADDR_LEN);
+                if (empty_addr(hw->override_addr)) {
+                        memcpy(hw->perm_addr, DEFAULT_MAC_ADDRESS,
+                                MAC_ADDR_LEN);
+                        memcpy(hw->override_addr, DEFAULT_MAC_ADDRESS,
+                                MAC_ADDR_LEN);
+                        hw->override_addr[5] += hw->id;
+                        hw_set_addr(hw);
+                }
+        }
+}
+
+static void hw_ena_add_addr(struct ksz_hw *hw, int index, u8 *mac_addr)
+{
+        int i;
+        u32 mac_addr_lo;
+        u32 mac_addr_hi;
+
+        mac_addr_hi = 0;
+        for (i = 0; i < 2; i++) {
+                mac_addr_hi <<= 8;
+                mac_addr_hi |= mac_addr[i];
+        }
+        mac_addr_hi |= ADD_ADDR_ENABLE;
+        mac_addr_lo = 0;
+        for (i = 2; i < 6; i++) {
+                mac_addr_lo <<= 8;
+                mac_addr_lo |= mac_addr[i];
+        }
+        index *= ADD_ADDR_INCR;
+
+        writel(mac_addr_lo, hw->io + index + KS_ADD_ADDR_0_LO);
+        writel(mac_addr_hi, hw->io + index + KS_ADD_ADDR_0_HI);
+}
+
+static void hw_set_add_addr(struct ksz_hw *hw)
+{
+        int i;
+
+        for (i = 0; i < ADDITIONAL_ENTRIES; i++) {
+                if (empty_addr(hw->address[i]))
+                        writel(0, hw->io + ADD_ADDR_INCR * i +
+                                KS_ADD_ADDR_0_HI);
+                else
+                        hw_ena_add_addr(hw, i, hw->address[i]);
+        }
+}
+
+static int hw_add_addr(struct ksz_hw *hw, u8 *mac_addr)
+{
+        int i;
+        int j = ADDITIONAL_ENTRIES;
+
+        if (!memcmp(hw->override_addr, mac_addr, MAC_ADDR_LEN))
+                return 0;
+        for (i = 0; i < hw->addr_list_size; i++) {
+                if (!memcmp(hw->address[i], mac_addr, MAC_ADDR_LEN))
+                        return 0;
+                if (ADDITIONAL_ENTRIES == j && empty_addr(hw->address[i]))
+                        j = i;
+        }
+        if (j < ADDITIONAL_ENTRIES) {
+                memcpy(hw->address[j], mac_addr, MAC_ADDR_LEN);
+                hw_ena_add_addr(hw, j, hw->address[j]);
+                return 0;
+        }
+        return -1;
+}
+
+static int hw_del_addr(struct ksz_hw *hw, u8 *mac_addr)
+{
+        int i;
+
+        for (i = 0; i < hw->addr_list_size; i++) {
+                if (!memcmp(hw->address[i], mac_addr, MAC_ADDR_LEN)) {
+                        memset(hw->address[i], 0, MAC_ADDR_LEN);
+                        writel(0, hw->io + ADD_ADDR_INCR * i +
+                                KS_ADD_ADDR_0_HI);
+                        return 0;
+                }
+        }
+        return -1;
+}
+
+/**
+ * hw_clr_multicast - clear multicast addresses
+ * @hw:         The hardware instance.
+ *
+ * This routine removes all multicast addresses set in the hardware.
+ */
+static void hw_clr_multicast(struct ksz_hw *hw)
+{
+        int i;
+
+        for (i = 0; i < HW_MULTICAST_SIZE; i++) {
+                hw->multi_bits[i] = 0;
+
+                writeb(0, hw->io + KS884X_MULTICAST_0_OFFSET + i);
+        }
+}
+
+/**
+ * hw_set_grp_addr - set multicast addresses
+ * @hw:         The hardware instance.
+ *
+ * This routine programs multicast addresses for the hardware to accept those
+ * addresses.
+ */
+static void hw_set_grp_addr(struct ksz_hw *hw)
+{
+        int i;
+        int index;
+        int position;
+        int value;
+
+        memset(hw->multi_bits, 0, sizeof(u8) * HW_MULTICAST_SIZE);
+
+        for (i = 0; i < hw->multi_list_size; i++) {
+                position = (ether_crc(6, hw->multi_list[i]) >> 26) & 0x3f;
+                index = position >> 3;
+                value = 1 << (position & 7);
+                hw->multi_bits[index] |= (u8) value;
+        }
+
+        for (i = 0; i < HW_MULTICAST_SIZE; i++)
+                writeb(hw->multi_bits[i], hw->io + KS884X_MULTICAST_0_OFFSET +
+                        i);
+}
+
+/**
+ * hw_set_multicast - enable or disable all multicast receiving
+ * @hw:         The hardware instance.
+ * @multicast:  To turn on or off the all multicast feature.
+ *
+ * This routine enables/disables the hardware to accept all multicast packets.
+ */
+static void hw_set_multicast(struct ksz_hw *hw, u8 multicast)
+{
+        /* Stop receiving for reconfiguration. */
+        hw_stop_rx(hw);
+
+        if (multicast)
+                hw->rx_cfg |= DMA_RX_ALL_MULTICAST;
+        else
+                hw->rx_cfg &= ~DMA_RX_ALL_MULTICAST;
+
+        if (hw->enabled)
+                hw_start_rx(hw);
+}
+
+/**
+ * hw_set_promiscuous - enable or disable promiscuous receiving
+ * @hw:         The hardware instance.
+ * @prom:       To turn on or off the promiscuous feature.
+ *
+ * This routine enables/disables the hardware to accept all packets.
+ */
+static void hw_set_promiscuous(struct ksz_hw *hw, u8 prom)
+{
+        /* Stop receiving for reconfiguration. */
+        hw_stop_rx(hw);
+
+        if (prom)
+                hw->rx_cfg |= DMA_RX_PROMISCUOUS;
+        else
+                hw->rx_cfg &= ~DMA_RX_PROMISCUOUS;
+
+        if (hw->enabled)
+                hw_start_rx(hw);
+}
+
+/**
+ * sw_enable - enable the switch
+ * @hw:         The hardware instance.
+ * @enable:     The flag to enable or disable the switch
+ *
+ * This routine is used to enable/disable the switch in KSZ8842.
+ */
+static void sw_enable(struct ksz_hw *hw, int enable)
+{
+        int port;
+
+        for (port = 0; port < SWITCH_PORT_NUM; port++) {
+                if (hw->dev_count > 1) {
+                        /* Set port-base vlan membership with host port. */
+                        sw_cfg_port_base_vlan(hw, port,
+                                HOST_MASK | (1 << port));
+                        port_set_stp_state(hw, port, STP_STATE_DISABLED);
+                } else {
+                        sw_cfg_port_base_vlan(hw, port, PORT_MASK);
+                        port_set_stp_state(hw, port, STP_STATE_FORWARDING);
+                }
+        }
+        if (hw->dev_count > 1)
+                port_set_stp_state(hw, SWITCH_PORT_NUM, STP_STATE_SIMPLE);
+        else
+                port_set_stp_state(hw, SWITCH_PORT_NUM, STP_STATE_FORWARDING);
+
+        if (enable)
+                enable = KS8842_START;
+        writew(enable, hw->io + KS884X_CHIP_ID_OFFSET);
+}
+
+/**
+ * sw_setup - setup the switch
+ * @hw:         The hardware instance.
+ *
+ * This routine setup the hardware switch engine for default operation.
+ */
+static void sw_setup(struct ksz_hw *hw)
+{
+        int port;
+
+        sw_set_global_ctrl(hw);
+
+        /* Enable switch broadcast storm protection at 10% percent rate. */
+        sw_init_broad_storm(hw);
+        hw_cfg_broad_storm(hw, BROADCAST_STORM_PROTECTION_RATE);
+        for (port = 0; port < SWITCH_PORT_NUM; port++)
+                sw_ena_broad_storm(hw, port);
+
+        sw_init_prio(hw);
+
+        sw_init_mirror(hw);
+
+        sw_init_prio_rate(hw);
+
+        sw_init_vlan(hw);
+
+        if (hw->features & STP_SUPPORT)
+                sw_init_stp(hw);
+        if (!sw_chk(hw, KS8842_SWITCH_CTRL_1_OFFSET,
+                        SWITCH_TX_FLOW_CTRL | SWITCH_RX_FLOW_CTRL))
+                hw->overrides |= PAUSE_FLOW_CTRL;
+        sw_enable(hw, 1);
+}
+
+/**
+ * ksz_start_timer - start kernel timer
+ * @info:       Kernel timer information.
+ * @time:       The time tick.
+ *
+ * This routine starts the kernel timer after the specified time tick.
+ */
+static void ksz_start_timer(struct ksz_timer_info *info, int time)
+{
+        info->cnt = 0;
+        info->timer.expires = jiffies + time;
+        add_timer(&info->timer);
+
+        /* infinity */
+        info->max = -1;
+}
+
+/**
+ * ksz_stop_timer - stop kernel timer
+ * @info:       Kernel timer information.
+ *
+ * This routine stops the kernel timer.
+ */
+static void ksz_stop_timer(struct ksz_timer_info *info)
+{
+        if (info->max) {
+                info->max = 0;
+                del_timer_sync(&info->timer);
+        }
+}
+
+static void ksz_init_timer(struct ksz_timer_info *info, int period,
+        void (*function)(unsigned long), void *data)
+{
+        info->max = 0;
+        info->period = period;
+        init_timer(&info->timer);
+        info->timer.function = function;
+        info->timer.data = (unsigned long) data;
+}
+
+static void ksz_update_timer(struct ksz_timer_info *info)
+{
+        ++info->cnt;
+        if (info->max > 0) {
+                if (info->cnt < info->max) {
+                        info->timer.expires = jiffies + info->period;
+                        add_timer(&info->timer);
+                } else
+                        info->max = 0;
+        } else if (info->max < 0) {
+                info->timer.expires = jiffies + info->period;
+                add_timer(&info->timer);
+        }
+}
+
+/**
+ * ksz_alloc_soft_desc - allocate software descriptors
+ * @desc_info:  Descriptor information structure.
+ * @transmit:   Indication that descriptors are for transmit.
+ *
+ * This local function allocates software descriptors for manipulation in
+ * memory.
+ *
+ * Return 0 if successful.
+ */
+static int ksz_alloc_soft_desc(struct ksz_desc_info *desc_info, int transmit)
+{
+        desc_info->ring = kmalloc(sizeof(struct ksz_desc) * desc_info->alloc,
+                GFP_KERNEL);
+        if (!desc_info->ring)
+                return 1;
+        memset((void *) desc_info->ring, 0,
+                sizeof(struct ksz_desc) * desc_info->alloc);
+        hw_init_desc(desc_info, transmit);
+        return 0;
+}
+
+/**
+ * ksz_alloc_desc - allocate hardware descriptors
+ * @adapter:    Adapter information structure.
+ *
+ * This local function allocates hardware descriptors for receiving and
+ * transmitting.
+ *
+ * Return 0 if successful.
+ */
+static int ksz_alloc_desc(struct dev_info *adapter)
+{
+        struct ksz_hw *hw = &adapter->hw;
+        int offset;
+
+        /* Allocate memory for RX & TX descriptors. */
+        adapter->desc_pool.alloc_size =
+                hw->rx_desc_info.size * hw->rx_desc_info.alloc +
+                hw->tx_desc_info.size * hw->tx_desc_info.alloc +
+                DESC_ALIGNMENT;
+
+        adapter->desc_pool.alloc_virt =
+                pci_alloc_consistent(
+                        adapter->pdev, adapter->desc_pool.alloc_size,
+                        &adapter->desc_pool.dma_addr);
+        if (adapter->desc_pool.alloc_virt == NULL) {
+                adapter->desc_pool.alloc_size = 0;
+                return 1;
+        }
+        memset(adapter->desc_pool.alloc_virt, 0, adapter->desc_pool.alloc_size);
+
+        /* Align to the next cache line boundary. */
+        offset = (((ulong) adapter->desc_pool.alloc_virt % DESC_ALIGNMENT) ?
+                (DESC_ALIGNMENT -
+                ((ulong) adapter->desc_pool.alloc_virt % DESC_ALIGNMENT)) : 0);
+        adapter->desc_pool.virt = adapter->desc_pool.alloc_virt + offset;
+        adapter->desc_pool.phys = adapter->desc_pool.dma_addr + offset;
+
+        /* Allocate receive/transmit descriptors. */
+        hw->rx_desc_info.ring_virt = (struct ksz_hw_desc *)
+                adapter->desc_pool.virt;
+        hw->rx_desc_info.ring_phys = adapter->desc_pool.phys;
+        offset = hw->rx_desc_info.alloc * hw->rx_desc_info.size;
+        hw->tx_desc_info.ring_virt = (struct ksz_hw_desc *)
+                (adapter->desc_pool.virt + offset);
+        hw->tx_desc_info.ring_phys = adapter->desc_pool.phys + offset;
+
+        if (ksz_alloc_soft_desc(&hw->rx_desc_info, 0))
+                return 1;
+        if (ksz_alloc_soft_desc(&hw->tx_desc_info, 1))
+                return 1;
+
+        return 0;
+}
+
+/**
+ * free_dma_buf - release DMA buffer resources
+ * @adapter:    Adapter information structure.
+ *
+ * This routine is just a helper function to release the DMA buffer resources.
+ */
+static void free_dma_buf(struct dev_info *adapter, struct ksz_dma_buf *dma_buf,
+        int direction)
+{
+        pci_unmap_single(adapter->pdev, dma_buf->dma, dma_buf->len, direction);
+        dev_kfree_skb(dma_buf->skb);
+        dma_buf->skb = NULL;
+        dma_buf->dma = 0;
+}
+
+/**
+ * ksz_init_rx_buffers - initialize receive descriptors
+ * @adapter:    Adapter information structure.
+ *
+ * This routine initializes DMA buffers for receiving.
+ */
+static void ksz_init_rx_buffers(struct dev_info *adapter)
+{
+        int i;
+        struct ksz_desc *desc;
+        struct ksz_dma_buf *dma_buf;
+        struct ksz_hw *hw = &adapter->hw;
+        struct ksz_desc_info *info = &hw->rx_desc_info;
+
+        for (i = 0; i < hw->rx_desc_info.alloc; i++) {
+                get_rx_pkt(info, &desc);
+
+                dma_buf = DMA_BUFFER(desc);
+                if (dma_buf->skb && dma_buf->len != adapter->mtu)
+                        free_dma_buf(adapter, dma_buf, PCI_DMA_FROMDEVICE);
+                dma_buf->len = adapter->mtu;
+                if (!dma_buf->skb)
+                        dma_buf->skb = alloc_skb(dma_buf->len, GFP_ATOMIC);
+                if (dma_buf->skb && !dma_buf->dma) {
+                        dma_buf->skb->dev = adapter->dev;
+                        dma_buf->dma = pci_map_single(
+                                adapter->pdev,
+                                skb_tail_pointer(dma_buf->skb),
+                                dma_buf->len,
+                                PCI_DMA_FROMDEVICE);
+                }
+
+                /* Set descriptor. */
+                set_rx_buf(desc, dma_buf->dma);
+                set_rx_len(desc, dma_buf->len);
+                release_desc(desc);
+        }
+}
+
+/**
+ * ksz_alloc_mem - allocate memory for hardware descriptors
+ * @adapter:    Adapter information structure.
+ *
+ * This function allocates memory for use by hardware descriptors for receiving
+ * and transmitting.
+ *
+ * Return 0 if successful.
+ */
+static int ksz_alloc_mem(struct dev_info *adapter)
+{
+        struct ksz_hw *hw = &adapter->hw;
+
+        /* Determine the number of receive and transmit descriptors. */
+        hw->rx_desc_info.alloc = NUM_OF_RX_DESC;
+        hw->tx_desc_info.alloc = NUM_OF_TX_DESC;
+
+        /* Determine how many descriptors to skip transmit interrupt. */
+        hw->tx_int_cnt = 0;
+        hw->tx_int_mask = NUM_OF_TX_DESC / 4;
+        if (hw->tx_int_mask > 8)
+                hw->tx_int_mask = 8;
+        while (hw->tx_int_mask) {
+                hw->tx_int_cnt++;
+                hw->tx_int_mask >>= 1;
+        }
+        if (hw->tx_int_cnt) {
+                hw->tx_int_mask = (1 << (hw->tx_int_cnt - 1)) - 1;
+                hw->tx_int_cnt = 0;
+        }
+
+        /* Determine the descriptor size. */
+        hw->rx_desc_info.size =
+                (((sizeof(struct ksz_hw_desc) + DESC_ALIGNMENT - 1) /
+                DESC_ALIGNMENT) * DESC_ALIGNMENT);
+        hw->tx_desc_info.size =
+                (((sizeof(struct ksz_hw_desc) + DESC_ALIGNMENT - 1) /
+                DESC_ALIGNMENT) * DESC_ALIGNMENT);
+        if (hw->rx_desc_info.size != sizeof(struct ksz_hw_desc))
+                printk(KERN_ALERT
+                        "Hardware descriptor size not right!\n");
+        ksz_check_desc_num(&hw->rx_desc_info);
+        ksz_check_desc_num(&hw->tx_desc_info);
+
+        /* Allocate descriptors. */
+        if (ksz_alloc_desc(adapter))
+                return 1;
+
+        return 0;
+}
+
+/**
+ * ksz_free_desc - free software and hardware descriptors
+ * @adapter:    Adapter information structure.
+ *
+ * This local routine frees the software and hardware descriptors allocated by
+ * ksz_alloc_desc().
+ */
+static void ksz_free_desc(struct dev_info *adapter)
+{
+        struct ksz_hw *hw = &adapter->hw;
+
+        /* Reset descriptor. */
+        hw->rx_desc_info.ring_virt = NULL;
+        hw->tx_desc_info.ring_virt = NULL;
+        hw->rx_desc_info.ring_phys = 0;
+        hw->tx_desc_info.ring_phys = 0;
+
+        /* Free memory. */
+        if (adapter->desc_pool.alloc_virt)
+                pci_free_consistent(
+                        adapter->pdev,
+                        adapter->desc_pool.alloc_size,
+                        adapter->desc_pool.alloc_virt,
+                        adapter->desc_pool.dma_addr);
+
+        /* Reset resource pool. */
+        adapter->desc_pool.alloc_size = 0;
+        adapter->desc_pool.alloc_virt = NULL;
+
+        kfree(hw->rx_desc_info.ring);
+        hw->rx_desc_info.ring = NULL;
+        kfree(hw->tx_desc_info.ring);
+        hw->tx_desc_info.ring = NULL;
+}
+
+/**
+ * ksz_free_buffers - free buffers used in the descriptors
+ * @adapter:    Adapter information structure.
+ * @desc_info:  Descriptor information structure.
+ *
+ * This local routine frees buffers used in the DMA buffers.
+ */
+static void ksz_free_buffers(struct dev_info *adapter,
+        struct ksz_desc_info *desc_info, int direction)
+{
+        int i;
+        struct ksz_dma_buf *dma_buf;
+        struct ksz_desc *desc = desc_info->ring;
+
+        for (i = 0; i < desc_info->alloc; i++) {
+                dma_buf = DMA_BUFFER(desc);
+                if (dma_buf->skb)
+                        free_dma_buf(adapter, dma_buf, direction);
+                desc++;
+        }
+}
+
+/**
+ * ksz_free_mem - free all resources used by descriptors
+ * @adapter:    Adapter information structure.
+ *
+ * This local routine frees all the resources allocated by ksz_alloc_mem().
+ */
+static void ksz_free_mem(struct dev_info *adapter)
+{
+        /* Free transmit buffers. */
+        ksz_free_buffers(adapter, &adapter->hw.tx_desc_info,
+                PCI_DMA_TODEVICE);
+
+        /* Free receive buffers. */
+        ksz_free_buffers(adapter, &adapter->hw.rx_desc_info,
+                PCI_DMA_FROMDEVICE);
+
+        /* Free descriptors. */
+        ksz_free_desc(adapter);
+}
+
+static void get_mib_counters(struct ksz_hw *hw, int first, int cnt,
+        u64 *counter)
+{
+        int i;
+        int mib;
+        int port;
+        struct ksz_port_mib *port_mib;
+
+        memset(counter, 0, sizeof(u64) * TOTAL_PORT_COUNTER_NUM);
+        for (i = 0, port = first; i < cnt; i++, port++) {
+                port_mib = &hw->port_mib[port];
+                for (mib = port_mib->mib_start; mib < hw->mib_cnt; mib++)
+                        counter[mib] += port_mib->counter[mib];
+        }
+}
+
+/**
+ * send_packet - send packet
+ * @skb:        Socket buffer.
+ * @dev:        Network device.
+ *
+ * This routine is used to send a packet out to the network.
+ */
+static void send_packet(struct sk_buff *skb, struct net_device *dev)
+{
+        struct ksz_desc *desc;
+        struct ksz_desc *first;
+        struct dev_priv *priv = netdev_priv(dev);
+        struct dev_info *hw_priv = priv->adapter;
+        struct ksz_hw *hw = &hw_priv->hw;
+        struct ksz_desc_info *info = &hw->tx_desc_info;
+        struct ksz_dma_buf *dma_buf;
+        int len;
+        int last_frag = skb_shinfo(skb)->nr_frags;
+
+        /*
+         * KSZ8842 with multiple device interfaces needs to be told which port
+         * to send.
+         */
+        if (hw->dev_count > 1)
+                hw->dst_ports = 1 << priv->port.first_port;
+
+        /* Hardware will pad the length to 60. */
+        len = skb->len;
+
+        /* Remember the very first descriptor. */
+        first = info->cur;
+        desc = first;
+
+        dma_buf = DMA_BUFFER(desc);
+        if (last_frag) {
+                int frag;
+                skb_frag_t *this_frag;
+
+                dma_buf->len = skb->len - skb->data_len;
+
+                dma_buf->dma = pci_map_single(
+                        hw_priv->pdev, skb->data, dma_buf->len,
+                        PCI_DMA_TODEVICE);
+                set_tx_buf(desc, dma_buf->dma);
+                set_tx_len(desc, dma_buf->len);
+
+                frag = 0;
+                do {
+                        this_frag = &skb_shinfo(skb)->frags[frag];
+
+                        /* Get a new descriptor. */
+                        get_tx_pkt(info, &desc);
+
+                        /* Keep track of descriptors used so far. */
+                        ++hw->tx_int_cnt;
+
+                        dma_buf = DMA_BUFFER(desc);
+                        dma_buf->len = this_frag->size;
+
+                        dma_buf->dma = pci_map_single(
+                                hw_priv->pdev,
+                                page_address(this_frag->page) +
+                                this_frag->page_offset,
+                                dma_buf->len,
+                                PCI_DMA_TODEVICE);
+                        set_tx_buf(desc, dma_buf->dma);
+                        set_tx_len(desc, dma_buf->len);
+
+                        frag++;
+                        if (frag == last_frag)
+                                break;
+
+                        /* Do not release the last descriptor here. */
+                        release_desc(desc);
+                } while (1);
+
+                /* current points to the last descriptor. */
+                info->cur = desc;
+
+                /* Release the first descriptor. */
+                release_desc(first);
+        } else {
+                dma_buf->len = len;
+
+                dma_buf->dma = pci_map_single(
+                        hw_priv->pdev, skb->data, dma_buf->len,
+                        PCI_DMA_TODEVICE);
+                set_tx_buf(desc, dma_buf->dma);
+                set_tx_len(desc, dma_buf->len);
+        }
+
+        if (skb->ip_summed == CHECKSUM_PARTIAL) {
+                (desc)->sw.buf.tx.csum_gen_tcp = 1;
+                (desc)->sw.buf.tx.csum_gen_udp = 1;
+        }
+
+        /*
+         * The last descriptor holds the packet so that it can be returned to
+         * network subsystem after all descriptors are transmitted.
+         */
+        dma_buf->skb = skb;
+
+        hw_send_pkt(hw);
+
+        /* Update transmit statistics. */
+        priv->stats.tx_packets++;
+        priv->stats.tx_bytes += len;
+}
+
+/**
+ * transmit_cleanup - clean up transmit descriptors
+ * @dev:        Network device.
+ *
+ * This routine is called to clean up the transmitted buffers.
+ */
+static void transmit_cleanup(struct dev_info *hw_priv, int normal)
+{
+        int last;
+        union desc_stat status;
+        struct ksz_hw *hw = &hw_priv->hw;
+        struct ksz_desc_info *info = &hw->tx_desc_info;
+        struct ksz_desc *desc;
+        struct ksz_dma_buf *dma_buf;
+        struct net_device *dev = NULL;
+
+        spin_lock(&hw_priv->hwlock);
+        last = info->last;
+
+        while (info->avail < info->alloc) {
+                /* Get next descriptor which is not hardware owned. */
+                desc = &info->ring[last];
+                status.data = le32_to_cpu(desc->phw->ctrl.data);
+                if (status.tx.hw_owned) {
+                        if (normal)
+                                break;
+                        else
+                                reset_desc(desc, status);
+                }
+
+                dma_buf = DMA_BUFFER(desc);
+                pci_unmap_single(
+                        hw_priv->pdev, dma_buf->dma, dma_buf->len,
+                        PCI_DMA_TODEVICE);
+
+                /* This descriptor contains the last buffer in the packet. */
+                if (dma_buf->skb) {
+                        dev = dma_buf->skb->dev;
+
+                        /* Release the packet back to network subsystem. */
+                        dev_kfree_skb_irq(dma_buf->skb);
+                        dma_buf->skb = NULL;
+                }
+
+                /* Free the transmitted descriptor. */
+                last++;
+                last &= info->mask;
+                info->avail++;
+        }
+        info->last = last;
+        spin_unlock(&hw_priv->hwlock);
+
+        /* Notify the network subsystem that the packet has been sent. */
+        if (dev)
+                dev->trans_start = jiffies;
+}
+
+/**
+ * transmit_done - transmit done processing
+ * @dev:        Network device.
+ *
+ * This routine is called when the transmit interrupt is triggered, indicating
+ * either a packet is sent successfully or there are transmit errors.
+ */
+static void tx_done(struct dev_info *hw_priv)
+{
+        struct ksz_hw *hw = &hw_priv->hw;
+        int port;
+
+        transmit_cleanup(hw_priv, 1);
+
+        for (port = 0; port < hw->dev_count; port++) {
+                struct net_device *dev = hw->port_info[port].pdev;
+
+                if (netif_running(dev) && netif_queue_stopped(dev))
+                        netif_wake_queue(dev);
+        }
+}
+
+static inline void copy_old_skb(struct sk_buff *old, struct sk_buff *skb)
+{
+        skb->dev = old->dev;
+        skb->protocol = old->protocol;
+        skb->ip_summed = old->ip_summed;
+        skb->csum = old->csum;
+        skb_set_network_header(skb, ETH_HLEN);
+
+        dev_kfree_skb(old);
+}
+
+/**
+ * netdev_tx - send out packet
+ * @skb:        Socket buffer.
+ * @dev:        Network device.
+ *
+ * This function is used by the upper network layer to send out a packet.
+ *
+ * Return 0 if successful; otherwise an error code indicating failure.
+ */
+static int netdev_tx(struct sk_buff *skb, struct net_device *dev)
+{
+        struct dev_priv *priv = netdev_priv(dev);
+        struct dev_info *hw_priv = priv->adapter;
+        struct ksz_hw *hw = &hw_priv->hw;
+        int left;
+        int num = 1;
+        int rc = 0;
+
+        if (hw->features & SMALL_PACKET_TX_BUG) {
+                struct sk_buff *org_skb = skb;
+
+                if (skb->len <= 48) {
+                        if (skb_end_pointer(skb) - skb->data >= 50) {
+                                memset(&skb->data[skb->len], 0, 50 - skb->len);
+                                skb->len = 50;
+                        } else {
+                                skb = dev_alloc_skb(50);
+                                if (!skb)
+                                        return NETDEV_TX_BUSY;
+                                memcpy(skb->data, org_skb->data, org_skb->len);
+                                memset(&skb->data[org_skb->len], 0,
+                                        50 - org_skb->len);
+                                skb->len = 50;
+                                copy_old_skb(org_skb, skb);
+                        }
+                }
+        }
+
+        spin_lock_irq(&hw_priv->hwlock);
+
+        num = skb_shinfo(skb)->nr_frags + 1;
+        left = hw_alloc_pkt(hw, skb->len, num);
+        if (left) {
+                if (left < num ||
+                                ((hw->features & IPV6_CSUM_GEN_HACK) &&
+                                (CHECKSUM_PARTIAL == skb->ip_summed) &&
+                                (ETH_P_IPV6 == htons(skb->protocol)))) {
+                        struct sk_buff *org_skb = skb;
+
+                        skb = dev_alloc_skb(org_skb->len);
+                        if (!skb)
+                                return NETDEV_TX_BUSY;
+                        skb_copy_and_csum_dev(org_skb, skb->data);
+                        org_skb->ip_summed = 0;
+                        skb->len = org_skb->len;
+                        copy_old_skb(org_skb, skb);
+                }
+                send_packet(skb, dev);
+                if (left <= num)
+                        netif_stop_queue(dev);
+        } else {
+                /* Stop the transmit queue until packet is allocated. */
+                netif_stop_queue(dev);
+                rc = NETDEV_TX_BUSY;
+        }
+
+        spin_unlock_irq(&hw_priv->hwlock);
+
+        return rc;
+}
+
+/**
+ * netdev_tx_timeout - transmit timeout processing
+ * @dev:        Network device.
+ *
+ * This routine is called when the transmit timer expires.  That indicates the
+ * hardware is not running correctly because transmit interrupts are not
+ * triggered to free up resources so that the transmit routine can continue
+ * sending out packets.  The hardware is reset to correct the problem.
+ */
+static void netdev_tx_timeout(struct net_device *dev)
+{
+        static unsigned long last_reset;
+
+        struct dev_priv *priv = netdev_priv(dev);
+        struct dev_info *hw_priv = priv->adapter;
+        struct ksz_hw *hw = &hw_priv->hw;
+        int port;
+
+        if (hw->dev_count > 1) {
+                /*
+                 * Only reset the hardware if time between calls is long
+                 * enough.
+                 */
+                if (jiffies - last_reset <= dev->watchdog_timeo)
+                        hw_priv = NULL;
+        }
+
+        last_reset = jiffies;
+        if (hw_priv) {
+                hw_dis_intr(hw);
+                hw_disable(hw);
+
+                transmit_cleanup(hw_priv, 0);
+                hw_reset_pkts(&hw->rx_desc_info);
+                hw_reset_pkts(&hw->tx_desc_info);
+                ksz_init_rx_buffers(hw_priv);
+
+                hw_reset(hw);
+
+                hw_set_desc_base(hw,
+                        hw->tx_desc_info.ring_phys,
+                        hw->rx_desc_info.ring_phys);
+                hw_set_addr(hw);
+                if (hw->all_multi)
+                        hw_set_multicast(hw, hw->all_multi);
+                else if (hw->multi_list_size)
+                        hw_set_grp_addr(hw);
+
+                if (hw->dev_count > 1) {
+                        hw_set_add_addr(hw);
+                        for (port = 0; port < SWITCH_PORT_NUM; port++) {
+                                struct net_device *port_dev;
+
+                                port_set_stp_state(hw, port,
+                                        STP_STATE_DISABLED);
+
+                                port_dev = hw->port_info[port].pdev;
+                                if (netif_running(port_dev))
+                                        port_set_stp_state(hw, port,
+                                                STP_STATE_SIMPLE);
+                        }
+                }
+
+                hw_enable(hw);
+                hw_ena_intr(hw);
+        }
+
+        dev->trans_start = jiffies;
+        netif_wake_queue(dev);
+}
+
+static inline void csum_verified(struct sk_buff *skb)
+{
+        unsigned short protocol;
+        struct iphdr *iph;
+
+        protocol = skb->protocol;
+        skb_reset_network_header(skb);
+        iph = (struct iphdr *) skb_network_header(skb);
+        if (protocol == htons(ETH_P_8021Q)) {
+                protocol = iph->tot_len;
+                skb_set_network_header(skb, VLAN_HLEN);
+                iph = (struct iphdr *) skb_network_header(skb);
+        }
+        if (protocol == htons(ETH_P_IP)) {
+                if (iph->protocol == IPPROTO_TCP)
+                        skb->ip_summed = CHECKSUM_UNNECESSARY;
+        }
+}
+
+static inline int rx_proc(struct net_device *dev, struct ksz_hw* hw,
+        struct ksz_desc *desc, union desc_stat status)
+{
+        int packet_len;
+        struct dev_priv *priv = netdev_priv(dev);
+        struct dev_info *hw_priv = priv->adapter;
+        struct ksz_dma_buf *dma_buf;
+        struct sk_buff *skb;
+        int rx_status;
+
+        /* Received length includes 4-byte CRC. */
+        packet_len = status.rx.frame_len - 4;
+
+        dma_buf = DMA_BUFFER(desc);
+        pci_dma_sync_single_for_cpu(
+                hw_priv->pdev, dma_buf->dma, packet_len + 4,
+                PCI_DMA_FROMDEVICE);
+
+        do {
+                /* skb->data != skb->head */
+                skb = dev_alloc_skb(packet_len + 2);
+                if (!skb) {
+                        priv->stats.rx_dropped++;
+                        return -ENOMEM;
+                }
+
+                /*
+                 * Align socket buffer in 4-byte boundary for better
+                 * performance.
+                 */
+                skb_reserve(skb, 2);
+
+                memcpy(skb_put(skb, packet_len),
+                        dma_buf->skb->data, packet_len);
+        } while (0);
+
+        skb->dev = dev;
+
+        skb->protocol = eth_type_trans(skb, dev);
+
+        if (hw->rx_cfg & (DMA_RX_CSUM_UDP | DMA_RX_CSUM_TCP))
+                csum_verified(skb);
+
+        /* Update receive statistics. */
+        priv->stats.rx_packets++;
+        priv->stats.rx_bytes += packet_len;
+
+        /* Notify upper layer for received packet. */
+        dev->last_rx = jiffies;
+
+        rx_status = netif_rx(skb);
+
+        return 0;
+}
+
+static int dev_rcv_packets(struct dev_info *hw_priv)
+{
+        int next;
+        union desc_stat status;
+        struct ksz_hw *hw = &hw_priv->hw;
+        struct net_device *dev = hw->port_info[0].pdev;
+        struct ksz_desc_info *info = &hw->rx_desc_info;
+        int left = info->alloc;
+        struct ksz_desc *desc;
+        int received = 0;
+
+        next = info->next;
+        while (left--) {
+                /* Get next descriptor which is not hardware owned. */
+                desc = &info->ring[next];
+                status.data = le32_to_cpu(desc->phw->ctrl.data);
+                if (status.rx.hw_owned)
+                        break;
+
+                /* Status valid only when last descriptor bit is set. */
+                if (status.rx.last_desc && status.rx.first_desc) {
+                        if (rx_proc(dev, hw, desc, status))
+                                goto release_packet;
+                        received++;
+                }
+
+release_packet:
+                release_desc(desc);
+                next++;
+                next &= info->mask;
+        }
+        info->next = next;
+
+        return received;
+}
+
+static int port_rcv_packets(struct dev_info *hw_priv)
+{
+        int next;
+        union desc_stat status;
+        struct ksz_hw *hw = &hw_priv->hw;
+        struct net_device *dev = hw->port_info[0].pdev;
+        struct ksz_desc_info *info = &hw->rx_desc_info;
+        int left = info->alloc;
+        struct ksz_desc *desc;
+        int received = 0;
+
+        next = info->next;
+        while (left--) {
+                /* Get next descriptor which is not hardware owned. */
+                desc = &info->ring[next];
+                status.data = le32_to_cpu(desc->phw->ctrl.data);
+                if (status.rx.hw_owned)
+                        break;
+
+                if (hw->dev_count > 1) {
+                        /* Get received port number. */
+                        int p = HW_TO_DEV_PORT(status.rx.src_port);
+
+                        dev = hw->port_info[p].pdev;
+                        if (!netif_running(dev))
+                                goto release_packet;
+                }
+
+                /* Status valid only when last descriptor bit is set. */
+                if (status.rx.last_desc && status.rx.first_desc) {
+                        if (rx_proc(dev, hw, desc, status))
+                                goto release_packet;
+                        received++;
+                }
+
+release_packet:
+                release_desc(desc);
+                next++;
+                next &= info->mask;
+        }
+        info->next = next;
+
+        return received;
+}
+
+static int dev_rcv_special(struct dev_info *hw_priv)
+{
+        int next;
+        union desc_stat status;
+        struct ksz_hw *hw = &hw_priv->hw;
+        struct net_device *dev = hw->port_info[0].pdev;
+        struct ksz_desc_info *info = &hw->rx_desc_info;
+        int left = info->alloc;
+        struct ksz_desc *desc;
+        int received = 0;
+
+        next = info->next;
+        while (left--) {
+                /* Get next descriptor which is not hardware owned. */
+                desc = &info->ring[next];
+                status.data = le32_to_cpu(desc->phw->ctrl.data);
+                if (status.rx.hw_owned)
+                        break;
+
+                if (hw->dev_count > 1) {
+                        /* Get received port number. */
+                        int p = HW_TO_DEV_PORT(status.rx.src_port);
+
+                        dev = hw->port_info[p].pdev;
+                        if (!netif_running(dev))
+                                goto release_packet;
+                }
+
+                /* Status valid only when last descriptor bit is set. */
+                if (status.rx.last_desc && status.rx.first_desc) {
+                        /*
+                         * Receive without error.  With receive errors
+                         * disabled, packets with receive errors will be
+                         * dropped, so no need to check the error bit.
+                         */
+                        if (!status.rx.error || (status.data &
+                                        KS_DESC_RX_ERROR_COND) ==
+                                        KS_DESC_RX_ERROR_TOO_LONG) {
+                                if (rx_proc(dev, hw, desc, status))
+                                        goto release_packet;
+                                received++;
+                        } else {
+                                struct dev_priv *priv = netdev_priv(dev);
+
+                                /* Update receive error statistics. */
+                                priv->port.counter[OID_COUNTER_RCV_ERROR]++;
+                        }
+                }
+
+release_packet:
+                release_desc(desc);
+                next++;
+                next &= info->mask;
+        }
+        info->next = next;
+
+        return received;
+}
+
+static void rx_proc_task(unsigned long data)
+{
+        struct dev_info *hw_priv = (struct dev_info *) data;
+        struct ksz_hw *hw = &hw_priv->hw;
+
+        if (!hw->enabled)
+                return;
+        if (unlikely(!hw_priv->dev_rcv(hw_priv))) {
+
+                /* In case receive process is suspended because of overrun. */
+                hw_resume_rx(hw);
+
+                /* tasklets are interruptible. */
+                spin_lock_irq(&hw_priv->hwlock);
+                hw_turn_on_intr(hw, KS884X_INT_RX_MASK);
+                spin_unlock_irq(&hw_priv->hwlock);
+        } else {
+                hw_ack_intr(hw, KS884X_INT_RX);
+                tasklet_schedule(&hw_priv->rx_tasklet);
+        }
+}
+
+static void tx_proc_task(unsigned long data)
+{
+        struct dev_info *hw_priv = (struct dev_info *) data;
+        struct ksz_hw *hw = &hw_priv->hw;
+
+        hw_ack_intr(hw, KS884X_INT_TX_MASK);
+
+        tx_done(hw_priv);
+
+        /* tasklets are interruptible. */
+        spin_lock_irq(&hw_priv->hwlock);
+        hw_turn_on_intr(hw, KS884X_INT_TX);
+        spin_unlock_irq(&hw_priv->hwlock);
+}
+
+static inline void handle_rx_stop(struct ksz_hw *hw)
+{
+        /* Receive just has been stopped. */
+        if (0 == hw->rx_stop)
+                hw->intr_mask &= ~KS884X_INT_RX_STOPPED;
+        else if (hw->rx_stop > 1) {
+                if (hw->enabled && (hw->rx_cfg & DMA_RX_ENABLE)) {
+                        hw_start_rx(hw);
+                } else {
+                        hw->intr_mask &= ~KS884X_INT_RX_STOPPED;
+                        hw->rx_stop = 0;
+                }
+        } else
+                /* Receive just has been started. */
+                hw->rx_stop++;
+}
+
+/**
+ * netdev_intr - interrupt handling
+ * @irq:        Interrupt number.
+ * @dev_id:     Network device.
+ *
+ * This function is called by upper network layer to signal interrupt.
+ *
+ * Return IRQ_HANDLED if interrupt is handled.
+ */
+static irqreturn_t netdev_intr(int irq, void *dev_id)
+{
+        uint int_enable = 0;
+        struct net_device *dev = (struct net_device *) dev_id;
+        struct dev_priv *priv = netdev_priv(dev);
+        struct dev_info *hw_priv = priv->adapter;
+        struct ksz_hw *hw = &hw_priv->hw;
+
+        hw_read_intr(hw, &int_enable);
+
+        /* Not our interrupt! */
+        if (!int_enable)
+                return IRQ_NONE;
+
+        do {
+                hw_ack_intr(hw, int_enable);
+                int_enable &= hw->intr_mask;
+
+                if (unlikely(int_enable & KS884X_INT_TX_MASK)) {
+                        hw_dis_intr_bit(hw, KS884X_INT_TX_MASK);
+                        tasklet_schedule(&hw_priv->tx_tasklet);
+                }
+
+                if (likely(int_enable & KS884X_INT_RX)) {
+                        hw_dis_intr_bit(hw, KS884X_INT_RX);
+                        tasklet_schedule(&hw_priv->rx_tasklet);
+                }
+
+                if (unlikely(int_enable & KS884X_INT_RX_OVERRUN)) {
+                        priv->stats.rx_fifo_errors++;
+                        hw_resume_rx(hw);
+                }
+
+                if (unlikely(int_enable & KS884X_INT_PHY)) {
+                        struct ksz_port *port = &priv->port;
+
+                        hw->features |= LINK_INT_WORKING;
+                        port_get_link_speed(port);
+                }
+
+                if (unlikely(int_enable & KS884X_INT_RX_STOPPED)) {
+                        handle_rx_stop(hw);
+                        break;
+                }
+
+                if (unlikely(int_enable & KS884X_INT_TX_STOPPED)) {
+                        u32 data;
+
+                        hw->intr_mask &= ~KS884X_INT_TX_STOPPED;
+                        printk(KERN_INFO "Tx stopped\n");
+                        data = readl(hw->io + KS_DMA_TX_CTRL);
+                        if (!(data & DMA_TX_ENABLE))
+                                printk(KERN_INFO "Tx disabled\n");
+                        break;
+                }
+        } while (0);
+
+        hw_ena_intr(hw);
+
+        return IRQ_HANDLED;
+}
+
+/*
+ * Linux network device functions
+ */
+
+static unsigned long next_jiffies;
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void netdev_netpoll(struct net_device *dev)
+{
+        struct dev_priv *priv = netdev_priv(dev);
+        struct dev_info *hw_priv = priv->adapter;
+
+        hw_dis_intr(&hw_priv->hw);
+        netdev_intr(dev->irq, dev);
+}
+#endif
+
+static void bridge_change(struct ksz_hw *hw)
+{
+        int port;
+        u8  member;
+        struct ksz_switch *sw = hw->ksz_switch;
+
+        /* No ports in forwarding state. */
+        if (!sw->member) {
+                port_set_stp_state(hw, SWITCH_PORT_NUM, STP_STATE_SIMPLE);
+                sw_block_addr(hw);
+        }
+        for (port = 0; port < SWITCH_PORT_NUM; port++) {
+                if (STP_STATE_FORWARDING == sw->port_cfg[port].stp_state)
+                        member = HOST_MASK | sw->member;
+                else
+                        member = HOST_MASK | (1 << port);
+                if (member != sw->port_cfg[port].member)
+                        sw_cfg_port_base_vlan(hw, port, member);
+        }
+}
+
+/**
+ * netdev_close - close network device
+ * @dev:        Network device.
+ *
+ * This function process the close operation of network device.  This is caused
+ * by the user command "ifconfig ethX down."
+ *
+ * Return 0 if successful; otherwise an error code indicating failure.
+ */
+static int netdev_close(struct net_device *dev)
+{
+        struct dev_priv *priv = netdev_priv(dev);
+        struct dev_info *hw_priv = priv->adapter;
+        struct ksz_port *port = &priv->port;
+        struct ksz_hw *hw = &hw_priv->hw;
+        int pi;
+
+        netif_stop_queue(dev);
+
+        ksz_stop_timer(&priv->monitor_timer_info);
+
+        /* Need to shut the port manually in multiple device interfaces mode. */
+        if (hw->dev_count > 1) {
+                port_set_stp_state(hw, port->first_port, STP_STATE_DISABLED);
+
+                /* Port is closed.  Need to change bridge setting. */
+                if (hw->features & STP_SUPPORT) {
+                        pi = 1 << port->first_port;
+                        if (hw->ksz_switch->member & pi) {
+                                hw->ksz_switch->member &= ~pi;
+                                bridge_change(hw);
+                        }
+                }
+        }
+        if (port->first_port > 0)
+                hw_del_addr(hw, dev->dev_addr);
+        if (!hw_priv->wol_enable)
+                port_set_power_saving(port, true);
+
+        if (priv->multicast)
+                --hw->all_multi;
+        if (priv->promiscuous)
+                --hw->promiscuous;
+
+        hw_priv->opened--;
+        if (!(hw_priv->opened)) {
+                ksz_stop_timer(&hw_priv->mib_timer_info);
+                flush_work(&hw_priv->mib_read);
+
+                hw_dis_intr(hw);
+                hw_disable(hw);
+                hw_clr_multicast(hw);
+
+                /* Delay for receive task to stop scheduling itself. */
+                msleep(2000 / HZ);
+
+                tasklet_disable(&hw_priv->rx_tasklet);
+                tasklet_disable(&hw_priv->tx_tasklet);
+                free_irq(dev->irq, hw_priv->dev);
+
+                transmit_cleanup(hw_priv, 0);
+                hw_reset_pkts(&hw->rx_desc_info);
+                hw_reset_pkts(&hw->tx_desc_info);
+
+                /* Clean out static MAC table when the switch is shutdown. */
+                if (hw->features & STP_SUPPORT)
+                        sw_clr_sta_mac_table(hw);
+        }
+
+        return 0;
+}
+
+static void hw_cfg_huge_frame(struct dev_info *hw_priv, struct ksz_hw *hw)
+{
+        if (hw->ksz_switch) {
+                u32 data;
+
+                data = readw(hw->io + KS8842_SWITCH_CTRL_2_OFFSET);
+                if (hw->features & RX_HUGE_FRAME)
+                        data |= SWITCH_HUGE_PACKET;
+                else
+                        data &= ~SWITCH_HUGE_PACKET;
+                writew(data, hw->io + KS8842_SWITCH_CTRL_2_OFFSET);
+        }
+        if (hw->features & RX_HUGE_FRAME) {
+                hw->rx_cfg |= DMA_RX_ERROR;
+                hw_priv->dev_rcv = dev_rcv_special;
+        } else {
+                hw->rx_cfg &= ~DMA_RX_ERROR;
+                if (hw->dev_count > 1)
+                        hw_priv->dev_rcv = port_rcv_packets;
+                else
+                        hw_priv->dev_rcv = dev_rcv_packets;
+        }
+}
+
+static int prepare_hardware(struct net_device *dev)
+{
+        struct dev_priv *priv = netdev_priv(dev);
+        struct dev_info *hw_priv = priv->adapter;
+        struct ksz_hw *hw = &hw_priv->hw;
+        int rc = 0;
+
+        /* Remember the network device that requests interrupts. */
+        hw_priv->dev = dev;
+        rc = request_irq(dev->irq, netdev_intr, IRQF_SHARED, dev->name, dev);
+        if (rc)
+                return rc;
+        tasklet_enable(&hw_priv->rx_tasklet);
+        tasklet_enable(&hw_priv->tx_tasklet);
+
+        hw->promiscuous = 0;
+        hw->all_multi = 0;
+        hw->multi_list_size = 0;
+
+        hw_reset(hw);
+
+        hw_set_desc_base(hw,
+                hw->tx_desc_info.ring_phys, hw->rx_desc_info.ring_phys);
+        hw_set_addr(hw);
+        hw_cfg_huge_frame(hw_priv, hw);
+        ksz_init_rx_buffers(hw_priv);
+        return 0;
+}
+
+/**
+ * netdev_open - open network device
+ * @dev:        Network device.
+ *
+ * This function process the open operation of network device.  This is caused
+ * by the user command "ifconfig ethX up."
+ *
+ * Return 0 if successful; otherwise an error code indicating failure.
+ */
+static int netdev_open(struct net_device *dev)
+{
+        struct dev_priv *priv = netdev_priv(dev);
+        struct dev_info *hw_priv = priv->adapter;
+        struct ksz_hw *hw = &hw_priv->hw;
+        struct ksz_port *port = &priv->port;
+        int i;
+        int p;
+        int rc = 0;
+
+        priv->multicast = 0;
+        priv->promiscuous = 0;
+
+        /* Reset device statistics. */
+        memset(&priv->stats, 0, sizeof(struct net_device_stats));
+        memset((void *) port->counter, 0,
+                (sizeof(u64) * OID_COUNTER_LAST));
+
+        if (!(hw_priv->opened)) {
+                rc = prepare_hardware(dev);
+                if (rc)
+                        return rc;
+                for (i = 0; i < hw->mib_port_cnt; i++) {
+                        if (next_jiffies < jiffies)
+                                next_jiffies = jiffies + HZ * 2;
+                        else
+                                next_jiffies += HZ * 1;
+                        hw_priv->counter[i].time = next_jiffies;
+                        hw->port_mib[i].state = media_disconnected;
+                        port_init_cnt(hw, i);
+                }
+                if (hw->ksz_switch)
+                        hw->port_mib[HOST_PORT].state = media_connected;
+                else {
+                        hw_add_wol_bcast(hw);
+                        hw_cfg_wol_pme(hw, 0);
+                        hw_clr_wol_pme_status(&hw_priv->hw);
+                }
+        }
+        port_set_power_saving(port, false);
+
+        for (i = 0, p = port->first_port; i < port->port_cnt; i++, p++) {
+                /*
+                 * Initialize to invalid value so that link detection
+                 * is done.
+                 */
+                hw->port_info[p].partner = 0xFF;
+                hw->port_info[p].state = media_disconnected;
+        }
+
+        /* Need to open the port in multiple device interfaces mode. */
+        if (hw->dev_count > 1) {
+                port_set_stp_state(hw, port->first_port, STP_STATE_SIMPLE);
+                if (port->first_port > 0)
+                        hw_add_addr(hw, dev->dev_addr);
+        }
+
+        port_get_link_speed(port);
+        if (port->force_link)
+                port_force_link_speed(port);
+        else
+                port_set_link_speed(port);
+
+        if (!(hw_priv->opened)) {
+                hw_setup_intr(hw);
+                hw_enable(hw);
+                hw_ena_intr(hw);
+
+                if (hw->mib_port_cnt)
+                        ksz_start_timer(&hw_priv->mib_timer_info,
+                                hw_priv->mib_timer_info.period);
+        }
+
+        hw_priv->opened++;
+
+        ksz_start_timer(&priv->monitor_timer_info,
+                priv->monitor_timer_info.period);
+
+        priv->media_state = port->linked->state;
+
+        if (media_connected == priv->media_state)
+                netif_carrier_on(dev);
+        else
+                netif_carrier_off(dev);
+        if (netif_msg_link(priv))
+                printk(KERN_INFO "%s link %s\n", dev->name,
+                        (media_connected == priv->media_state ?
+                        "on" : "off"));
+
+        netif_start_queue(dev);
+
+        return 0;
+}
+
+/* RX errors = rx_errors */
+/* RX dropped = rx_dropped */
+/* RX overruns = rx_fifo_errors */
+/* RX frame = rx_crc_errors + rx_frame_errors + rx_length_errors */
+/* TX errors = tx_errors */
+/* TX dropped = tx_dropped */
+/* TX overruns = tx_fifo_errors */
+/* TX carrier = tx_aborted_errors + tx_carrier_errors + tx_window_errors */
+/* collisions = collisions */
+
+/**
+ * netdev_query_statistics - query network device statistics
+ * @dev:        Network device.
+ *
+ * This function returns the statistics of the network device.  The device
+ * needs not be opened.
+ *
+ * Return network device statistics.
+ */
+static struct net_device_stats *netdev_query_statistics(struct net_device *dev)
+{
+        struct dev_priv *priv = netdev_priv(dev);
+        struct ksz_port *port = &priv->port;
+        struct ksz_hw *hw = &priv->adapter->hw;
+        struct ksz_port_mib *mib;
+        int i;
+        int p;
+
+        priv->stats.rx_errors = port->counter[OID_COUNTER_RCV_ERROR];
+        priv->stats.tx_errors = port->counter[OID_COUNTER_XMIT_ERROR];
+
+        /* Reset to zero to add count later. */
+        priv->stats.multicast = 0;
+        priv->stats.collisions = 0;
+        priv->stats.rx_length_errors = 0;
+        priv->stats.rx_crc_errors = 0;
+        priv->stats.rx_frame_errors = 0;
+        priv->stats.tx_window_errors = 0;
+
+        for (i = 0, p = port->first_port; i < port->mib_port_cnt; i++, p++) {
+                mib = &hw->port_mib[p];
+
+                priv->stats.multicast += (unsigned long)
+                        mib->counter[MIB_COUNTER_RX_MULTICAST];
+
+                priv->stats.collisions += (unsigned long)
+                        mib->counter[MIB_COUNTER_TX_TOTAL_COLLISION];
+
+                priv->stats.rx_length_errors += (unsigned long)(
+                        mib->counter[MIB_COUNTER_RX_UNDERSIZE] +
+                        mib->counter[MIB_COUNTER_RX_FRAGMENT] +
+                        mib->counter[MIB_COUNTER_RX_OVERSIZE] +
+                        mib->counter[MIB_COUNTER_RX_JABBER]);
+                priv->stats.rx_crc_errors += (unsigned long)
+                        mib->counter[MIB_COUNTER_RX_CRC_ERR];
+                priv->stats.rx_frame_errors += (unsigned long)(
+                        mib->counter[MIB_COUNTER_RX_ALIGNMENT_ERR] +
+                        mib->counter[MIB_COUNTER_RX_SYMBOL_ERR]);
+
+                priv->stats.tx_window_errors += (unsigned long)
+                        mib->counter[MIB_COUNTER_TX_LATE_COLLISION];
+        }
+
+        return &priv->stats;
+}
+
+/**
+ * netdev_set_mac_address - set network device MAC address
+ * @dev:        Network device.
+ * @addr:       Buffer of MAC address.
+ *
+ * This function is used to set the MAC address of the network device.
+ *
+ * Return 0 to indicate success.
+ */
+static int netdev_set_mac_address(struct net_device *dev, void *addr)
+{
+        struct dev_priv *priv = netdev_priv(dev);
+        struct dev_info *hw_priv = priv->adapter;
+        struct ksz_hw *hw = &hw_priv->hw;
+        struct sockaddr *mac = addr;
+        uint interrupt;
+
+        if (priv->port.first_port > 0)
+                hw_del_addr(hw, dev->dev_addr);
+        else {
+                hw->mac_override = 1;
+                memcpy(hw->override_addr, mac->sa_data, MAC_ADDR_LEN);
+        }
+
+        memcpy(dev->dev_addr, mac->sa_data, MAX_ADDR_LEN);
+
+        interrupt = hw_block_intr(hw);
+
+        if (priv->port.first_port > 0)
+                hw_add_addr(hw, dev->dev_addr);
+        else
+                hw_set_addr(hw);
+        hw_restore_intr(hw, interrupt);
+
+        return 0;
+}
+
+static void dev_set_promiscuous(struct net_device *dev, struct dev_priv *priv,
+        struct ksz_hw *hw, int promiscuous)
+{
+        if (promiscuous != priv->promiscuous) {
+                u8 prev_state = hw->promiscuous;
+
+                if (promiscuous)
+                        ++hw->promiscuous;
+                else
+                        --hw->promiscuous;
+                priv->promiscuous = promiscuous;
+
+                /* Turn on/off promiscuous mode. */
+                if (hw->promiscuous <= 1 && prev_state <= 1)
+                        hw_set_promiscuous(hw, hw->promiscuous);
+
+                /*
+                 * Port is not in promiscuous mode, meaning it is released
+                 * from the bridge.
+                 */
+                if ((hw->features & STP_SUPPORT) && !promiscuous &&
+                                dev->br_port) {
+                        struct ksz_switch *sw = hw->ksz_switch;
+                        int port = priv->port.first_port;
+
+                        port_set_stp_state(hw, port, STP_STATE_DISABLED);
+                        port = 1 << port;
+                        if (sw->member & port) {
+                                sw->member &= ~port;
+                                bridge_change(hw);
+                        }
+                }
+        }
+}
+
+static void dev_set_multicast(struct dev_priv *priv, struct ksz_hw *hw,
+        int multicast)
+{
+        if (multicast != priv->multicast) {
+                u8 all_multi = hw->all_multi;
+
+                if (multicast)
+                        ++hw->all_multi;
+                else
+                        --hw->all_multi;
+                priv->multicast = multicast;
+
+                /* Turn on/off all multicast mode. */
+                if (hw->all_multi <= 1 && all_multi <= 1)
+                        hw_set_multicast(hw, hw->all_multi);
+        }
+}
+
+/**
+ * netdev_set_rx_mode
+ * @dev:        Network device.
+ *
+ * This routine is used to set multicast addresses or put the network device
+ * into promiscuous mode.
+ */
+static void netdev_set_rx_mode(struct net_device *dev)
+{
+        struct dev_priv *priv = netdev_priv(dev);
+        struct dev_info *hw_priv = priv->adapter;
+        struct ksz_hw *hw = &hw_priv->hw;
+        struct dev_mc_list *mc_ptr;
+        int multicast = (dev->flags & IFF_ALLMULTI);
+
+        dev_set_promiscuous(dev, priv, hw, (dev->flags & IFF_PROMISC));
+
+        if (hw_priv->hw.dev_count > 1)
+                multicast |= (dev->flags & IFF_MULTICAST);
+        dev_set_multicast(priv, hw, multicast);
+
+        /* Cannot use different hashes in multiple device interfaces mode. */
+        if (hw_priv->hw.dev_count > 1)
+                return;
+
+        if ((dev->flags & IFF_MULTICAST) && dev->mc_count) {
+                int i = 0;
+
+                /* List too big to support so turn on all multicast mode. */
+                if (dev->mc_count > MAX_MULTICAST_LIST) {
+                        if (MAX_MULTICAST_LIST != hw->multi_list_size) {
+                                hw->multi_list_size = MAX_MULTICAST_LIST;
+                                ++hw->all_multi;
+                                hw_set_multicast(hw, hw->all_multi);
+                        }
+                        return;
+                }
+
+                for (mc_ptr = dev->mc_list; mc_ptr; mc_ptr = mc_ptr->next) {
+                        if (!(*mc_ptr->dmi_addr & 1))
+                                continue;
+                        if (i >= MAX_MULTICAST_LIST)
+                                break;
+                        memcpy(hw->multi_list[i++], mc_ptr->dmi_addr,
+                                MAC_ADDR_LEN);
+                }
+                hw->multi_list_size = (u8) i;
+                hw_set_grp_addr(hw);
+        } else {
+                if (MAX_MULTICAST_LIST == hw->multi_list_size) {
+                        --hw->all_multi;
+                        hw_set_multicast(hw, hw->all_multi);
+                }
+                hw->multi_list_size = 0;
+                hw_clr_multicast(hw);
+        }
+}
+
+static int netdev_change_mtu(struct net_device *dev, int new_mtu)
+{
+        struct dev_priv *priv = netdev_priv(dev);
+        struct dev_info *hw_priv = priv->adapter;
+        struct ksz_hw *hw = &hw_priv->hw;
+        int hw_mtu;
+
+        if (netif_running(dev))
+                return -EBUSY;
+
+        /* Cannot use different MTU in multiple device interfaces mode. */
+        if (hw->dev_count > 1)
+                if (dev != hw_priv->dev)
+                        return 0;
+        if (new_mtu < 60)
+                return -EINVAL;
+
+        if (dev->mtu != new_mtu) {
+                hw_mtu = new_mtu + ETHERNET_HEADER_SIZE + 4;
+                if (hw_mtu > MAX_RX_BUF_SIZE)
+                        return -EINVAL;
+                if (hw_mtu > REGULAR_RX_BUF_SIZE) {
+                        hw->features |= RX_HUGE_FRAME;
+                        hw_mtu = MAX_RX_BUF_SIZE;
+                } else {
+                        hw->features &= ~RX_HUGE_FRAME;
+                        hw_mtu = REGULAR_RX_BUF_SIZE;
+                }
+                hw_mtu = (hw_mtu + 3) & ~3;
+                hw_priv->mtu = hw_mtu;
+                dev->mtu = new_mtu;
+        }
+        return 0;
+}
+
+/**
+ * netdev_ioctl - I/O control processing
+ * @dev:        Network device.
+ * @ifr:        Interface request structure.
+ * @cmd:        I/O control code.
+ *
+ * This function is used to process I/O control calls.
+ *
+ * Return 0 to indicate success.
+ */
+static int netdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
+{
+        struct dev_priv *priv = netdev_priv(dev);
+        struct dev_info *hw_priv = priv->adapter;
+        struct ksz_hw *hw = &hw_priv->hw;
+        struct ksz_port *port = &priv->port;
+        int rc;
+        int result = 0;
+        struct mii_ioctl_data *data = if_mii(ifr);
+
+        if (down_interruptible(&priv->proc_sem))
+                return -ERESTARTSYS;
+
+        /* assume success */
+        rc = 0;
+        switch (cmd) {
+        /* Get address of MII PHY in use. */
+        case SIOCGMIIPHY:
+                data->phy_id = priv->id;
+
+                /* Fallthrough... */
+
+        /* Read MII PHY register. */
+        case SIOCGMIIREG:
+                if (data->phy_id != priv->id || data->reg_num >= 6)
+                        result = -EIO;
+                else
+                        hw_r_phy(hw, port->linked->port_id, data->reg_num,
+                                &data->val_out);
+                break;
+
+        /* Write MII PHY register. */
+        case SIOCSMIIREG:
+                if (!capable(CAP_NET_ADMIN))
+                        result = -EPERM;
+                else if (data->phy_id != priv->id || data->reg_num >= 6)
+                        result = -EIO;
+                else
+                        hw_w_phy(hw, port->linked->port_id, data->reg_num,
+                                data->val_in);
+                break;
+
+        default:
+                result = -EOPNOTSUPP;
+        }
+
+        up(&priv->proc_sem);
+
+        return result;
+}
+
+/*
+ * MII support
+ */
+
+/**
+ * mdio_read - read PHY register
+ * @dev:        Network device.
+ * @phy_id:     The PHY id.
+ * @reg_num:    The register number.
+ *
+ * This function returns the PHY register value.
+ *
+ * Return the register value.
+ */
+static int mdio_read(struct net_device *dev, int phy_id, int reg_num)
+{
+        struct dev_priv *priv = netdev_priv(dev);
+        struct ksz_port *port = &priv->port;
+        struct ksz_hw *hw = port->hw;
+        u16 val_out;
+
+        hw_r_phy(hw, port->linked->port_id, reg_num << 1, &val_out);
+        return val_out;
+}
+
+/**
+ * mdio_write - set PHY register
+ * @dev:        Network device.
+ * @phy_id:     The PHY id.
+ * @reg_num:    The register number.
+ * @val:        The register value.
+ *
+ * This procedure sets the PHY register value.
+ */
+static void mdio_write(struct net_device *dev, int phy_id, int reg_num, int val)
+{
+        struct dev_priv *priv = netdev_priv(dev);
+        struct ksz_port *port = &priv->port;
+        struct ksz_hw *hw = port->hw;
+        int i;
+        int pi;
+
+        for (i = 0, pi = port->first_port; i < port->port_cnt; i++, pi++)
+                hw_w_phy(hw, pi, reg_num << 1, val);
+}
+
+/*
+ * ethtool support
+ */
+
+#define EEPROM_SIZE                     0x40
+
+static u16 eeprom_data[EEPROM_SIZE] = { 0 };
+
+#define ADVERTISED_ALL                  \
+        (ADVERTISED_10baseT_Half |      \
+        ADVERTISED_10baseT_Full |       \
+        ADVERTISED_100baseT_Half |      \
+        ADVERTISED_100baseT_Full)
+
+/* These functions use the MII functions in mii.c. */
+
+/**
+ * netdev_get_settings - get network device settings
+ * @dev:        Network device.
+ * @cmd:        Ethtool command.
+ *
+ * This function queries the PHY and returns its state in the ethtool command.
+ *
+ * Return 0 if successful; otherwise an error code.
+ */
+static int netdev_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+        struct dev_priv *priv = netdev_priv(dev);
+        struct dev_info *hw_priv = priv->adapter;
+
+        mutex_lock(&hw_priv->lock);
+        mii_ethtool_gset(&priv->mii_if, cmd);
+        cmd->advertising |= SUPPORTED_TP;
+        mutex_unlock(&hw_priv->lock);
+
+        /* Save advertised settings for workaround in next function. */
+        priv->advertising = cmd->advertising;
+        return 0;
+}
+
+/**
+ * netdev_set_settings - set network device settings
+ * @dev:        Network device.
+ * @cmd:        Ethtool command.
+ *
+ * This function sets the PHY according to the ethtool command.
+ *
+ * Return 0 if successful; otherwise an error code.
+ */
+static int netdev_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+        struct dev_priv *priv = netdev_priv(dev);
+        struct dev_info *hw_priv = priv->adapter;
+        struct ksz_port *port = &priv->port;
+        int rc;
+
+        /*
+         * ethtool utility does not change advertised setting if auto
+         * negotiation is not specified explicitly.
+         */
+        if (cmd->autoneg && priv->advertising == cmd->advertising) {
+                cmd->advertising |= ADVERTISED_ALL;
+                if (10 == cmd->speed)
+                        cmd->advertising &=
+                                ~(ADVERTISED_100baseT_Full |
+                                ADVERTISED_100baseT_Half);
+                else if (100 == cmd->speed)
+                        cmd->advertising &=
+                                ~(ADVERTISED_10baseT_Full |
+                                ADVERTISED_10baseT_Half);
+                if (0 == cmd->duplex)
+                        cmd->advertising &=
+                                ~(ADVERTISED_100baseT_Full |
+                                ADVERTISED_10baseT_Full);
+                else if (1 == cmd->duplex)
+                        cmd->advertising &=
+                                ~(ADVERTISED_100baseT_Half |
+                                ADVERTISED_10baseT_Half);
+        }
+        mutex_lock(&hw_priv->lock);
+        if (cmd->autoneg &&
+                        (cmd->advertising & ADVERTISED_ALL) ==
+                        ADVERTISED_ALL) {
+                port->duplex = 0;
+                port->speed = 0;
+                port->force_link = 0;
+        } else {
+                port->duplex = cmd->duplex + 1;
+                if (cmd->speed != 1000)
+                        port->speed = cmd->speed;
+                if (cmd->autoneg)
+                        port->force_link = 0;
+                else
+                        port->force_link = 1;
+        }
+        rc = mii_ethtool_sset(&priv->mii_if, cmd);
+        mutex_unlock(&hw_priv->lock);
+        return rc;
+}
+
+/**
+ * netdev_nway_reset - restart auto-negotiation
+ * @dev:        Network device.
+ *
+ * This function restarts the PHY for auto-negotiation.
+ *
+ * Return 0 if successful; otherwise an error code.
+ */
+static int netdev_nway_reset(struct net_device *dev)
+{
+        struct dev_priv *priv = netdev_priv(dev);
+        struct dev_info *hw_priv = priv->adapter;
+        int rc;
+
+        mutex_lock(&hw_priv->lock);
+        rc = mii_nway_restart(&priv->mii_if);
+        mutex_unlock(&hw_priv->lock);
+        return rc;
+}
+
+/**
+ * netdev_get_link - get network device link status
+ * @dev:        Network device.
+ *
+ * This function gets the link status from the PHY.
+ *
+ * Return true if PHY is linked and false otherwise.
+ */
+static u32 netdev_get_link(struct net_device *dev)
+{
+        struct dev_priv *priv = netdev_priv(dev);
+        int rc;
+
+        rc = mii_link_ok(&priv->mii_if);
+        return rc;
+}
+
+/**
+ * netdev_get_drvinfo - get network driver information
+ * @dev:        Network device.
+ * @info:       Ethtool driver info data structure.
+ *
+ * This procedure returns the driver information.
+ */
+static void netdev_get_drvinfo(struct net_device *dev,
+        struct ethtool_drvinfo *info)
+{
+        struct dev_priv *priv = netdev_priv(dev);
+        struct dev_info *hw_priv = priv->adapter;
+
+        strcpy(info->driver, DRV_NAME);
+        strcpy(info->version, DRV_VERSION);
+        strcpy(info->bus_info, pci_name(hw_priv->pdev));
+}
+
+/**
+ * netdev_get_regs_len - get length of register dump
+ * @dev:        Network device.
+ *
+ * This function returns the length of the register dump.
+ *
+ * Return length of the register dump.
+ */
+static struct hw_regs {
+        int start;
+        int end;
+} hw_regs_range[] = {
+        { KS_DMA_TX_CTRL,       KS884X_INTERRUPTS_STATUS },
+        { KS_ADD_ADDR_0_LO,     KS_ADD_ADDR_F_HI },
+        { KS884X_ADDR_0_OFFSET, KS8841_WOL_FRAME_BYTE2_OFFSET },
+        { KS884X_SIDER_P,       KS8842_SGCR7_P },
+        { KS8842_MACAR1_P,      KS8842_TOSR8_P },
+        { KS884X_P1MBCR_P,      KS8842_P3ERCR_P },
+        { 0, 0 }
+};
+
+static int netdev_get_regs_len(struct net_device *dev)
+{
+        struct hw_regs *range = hw_regs_range;
+        int regs_len = 0x10 * sizeof(u32);
+
+        while (range->end > range->start) {
+                regs_len += (range->end - range->start + 3) / 4 * 4;
+                range++;
+        }
+        return regs_len;
+}
+
+/**
+ * netdev_get_regs - get register dump
+ * @dev:        Network device.
+ * @regs:       Ethtool registers data structure.
+ * @ptr:        Buffer to store the register values.
+ *
+ * This procedure dumps the register values in the provided buffer.
+ */
+static void netdev_get_regs(struct net_device *dev, struct ethtool_regs *regs,
+        void *ptr)
+{
+        struct dev_priv *priv = netdev_priv(dev);
+        struct dev_info *hw_priv = priv->adapter;
+        struct ksz_hw *hw = &hw_priv->hw;
+        int *buf = (int *) ptr;
+        struct hw_regs *range = hw_regs_range;
+        int len;
+
+        mutex_lock(&hw_priv->lock);
+        regs->version = 0;
+        for (len = 0; len < 0x40; len += 4) {
+                pci_read_config_dword(hw_priv->pdev, len, buf);
+                buf++;
+        }
+        while (range->end > range->start) {
+                for (len = range->start; len < range->end; len += 4) {
+                        *buf = readl(hw->io + len);
+                        buf++;
+                }
+                range++;
+        }
+        mutex_unlock(&hw_priv->lock);
+}
+
+#define WOL_SUPPORT                     \
+        (WAKE_PHY | WAKE_MAGIC |        \
+        WAKE_UCAST | WAKE_MCAST |       \
+        WAKE_BCAST | WAKE_ARP)
+
+/**
+ * netdev_get_wol - get Wake-on-LAN support
+ * @dev:        Network device.
+ * @wol:        Ethtool Wake-on-LAN data structure.
+ *
+ * This procedure returns Wake-on-LAN support.
+ */
+static void netdev_get_wol(struct net_device *dev,
+        struct ethtool_wolinfo *wol)
+{
+        struct dev_priv *priv = netdev_priv(dev);
+        struct dev_info *hw_priv = priv->adapter;
+
+        wol->supported = hw_priv->wol_support;
+        wol->wolopts = hw_priv->wol_enable;
+        memset(&wol->sopass, 0, sizeof(wol->sopass));
+}
+
+/**
+ * netdev_set_wol - set Wake-on-LAN support
+ * @dev:        Network device.
+ * @wol:        Ethtool Wake-on-LAN data structure.
+ *
+ * This function sets Wake-on-LAN support.
+ *
+ * Return 0 if successful; otherwise an error code.
+ */
+static int netdev_set_wol(struct net_device *dev,
+        struct ethtool_wolinfo *wol)
+{
+        struct dev_priv *priv = netdev_priv(dev);
+        struct dev_info *hw_priv = priv->adapter;
+
+        /* Need to find a way to retrieve the device IP address. */
+        u8 net_addr[] = { 192, 168, 1, 1 };
+
+        if (wol->wolopts & ~hw_priv->wol_support)
+                return -EINVAL;
+
+        hw_priv->wol_enable = wol->wolopts;
+
+        /* Link wakeup cannot really be disabled. */
+        if (wol->wolopts)
+                hw_priv->wol_enable |= WAKE_PHY;
+        hw_enable_wol(&hw_priv->hw, hw_priv->wol_enable, net_addr);
+        return 0;
+}
+
+/**
+ * netdev_get_msglevel - get debug message level
+ * @dev:        Network device.
+ *
+ * This function returns current debug message level.
+ *
+ * Return current debug message flags.
+ */
+static u32 netdev_get_msglevel(struct net_device *dev)
+{
+        struct dev_priv *priv = netdev_priv(dev);
+
+        return priv->msg_enable;
+}
+
+/**
+ * netdev_set_msglevel - set debug message level
+ * @dev:        Network device.
+ * @value:      Debug message flags.
+ *
+ * This procedure sets debug message level.
+ */
+static void netdev_set_msglevel(struct net_device *dev, u32 value)
+{
+        struct dev_priv *priv = netdev_priv(dev);
+
+        priv->msg_enable = value;
+}
+
+/**
+ * netdev_get_eeprom_len - get EEPROM length
+ * @dev:        Network device.
+ *
+ * This function returns the length of the EEPROM.
+ *
+ * Return length of the EEPROM.
+ */
+static int netdev_get_eeprom_len(struct net_device *dev)
+{
+        return EEPROM_SIZE * 2;
+}
+
+/**
+ * netdev_get_eeprom - get EEPROM data
+ * @dev:        Network device.
+ * @eeprom:     Ethtool EEPROM data structure.
+ * @data:       Buffer to store the EEPROM data.
+ *
+ * This function dumps the EEPROM data in the provided buffer.
+ *
+ * Return 0 if successful; otherwise an error code.
+ */
+#define EEPROM_MAGIC                    0x10A18842
+
+static int netdev_get_eeprom(struct net_device *dev,
+        struct ethtool_eeprom *eeprom, u8 *data)
+{
+        struct dev_priv *priv = netdev_priv(dev);
+        struct dev_info *hw_priv = priv->adapter;
+        u8 *eeprom_byte = (u8 *) eeprom_data;
+        int i;
+        int len;
+
+        len = (eeprom->offset + eeprom->len + 1) / 2;
+        for (i = eeprom->offset / 2; i < len; i++)
+                eeprom_data[i] = eeprom_read(&hw_priv->hw, i);
+        eeprom->magic = EEPROM_MAGIC;
+        memcpy(data, &eeprom_byte[eeprom->offset], eeprom->len);
+
+        return 0;
+}
+
+/**
+ * netdev_set_eeprom - write EEPROM data
+ * @dev:        Network device.
+ * @eeprom:     Ethtool EEPROM data structure.
+ * @data:       Data buffer.
+ *
+ * This function modifies the EEPROM data one byte at a time.
+ *
+ * Return 0 if successful; otherwise an error code.
+ */
+static int netdev_set_eeprom(struct net_device *dev,
+        struct ethtool_eeprom *eeprom, u8 *data)
+{
+        struct dev_priv *priv = netdev_priv(dev);
+        struct dev_info *hw_priv = priv->adapter;
+        u16 eeprom_word[EEPROM_SIZE];
+        u8 *eeprom_byte = (u8 *) eeprom_word;
+        int i;
+        int len;
+
+        if (eeprom->magic != EEPROM_MAGIC)
+                return 1;
+
+        len = (eeprom->offset + eeprom->len + 1) / 2;
+        for (i = eeprom->offset / 2; i < len; i++)
+                eeprom_data[i] = eeprom_read(&hw_priv->hw, i);
+        memcpy(eeprom_word, eeprom_data, EEPROM_SIZE * 2);
+        memcpy(&eeprom_byte[eeprom->offset], data, eeprom->len);
+        for (i = 0; i < EEPROM_SIZE; i++)
+                if (eeprom_word[i] != eeprom_data[i]) {
+                        eeprom_data[i] = eeprom_word[i];
+                        eeprom_write(&hw_priv->hw, i, eeprom_data[i]);
+        }
+
+        return 0;
+}
+
+/**
+ * netdev_get_pauseparam - get flow control parameters
+ * @dev:        Network device.
+ * @pause:      Ethtool PAUSE settings data structure.
+ *
+ * This procedure returns the PAUSE control flow settings.
+ */
+static void netdev_get_pauseparam(struct net_device *dev,
+        struct ethtool_pauseparam *pause)
+{
+        struct dev_priv *priv = netdev_priv(dev);
+        struct dev_info *hw_priv = priv->adapter;
+        struct ksz_hw *hw = &hw_priv->hw;
+
+        pause->autoneg = (hw->overrides & PAUSE_FLOW_CTRL) ? 0 : 1;
+        if (!hw->ksz_switch) {
+                pause->rx_pause =
+                        (hw->rx_cfg & DMA_RX_FLOW_ENABLE) ? 1 : 0;
+                pause->tx_pause =
+                        (hw->tx_cfg & DMA_TX_FLOW_ENABLE) ? 1 : 0;
+        } else {
+                pause->rx_pause =
+                        (sw_chk(hw, KS8842_SWITCH_CTRL_1_OFFSET,
+                                SWITCH_RX_FLOW_CTRL)) ? 1 : 0;
+                pause->tx_pause =
+                        (sw_chk(hw, KS8842_SWITCH_CTRL_1_OFFSET,
+                                SWITCH_TX_FLOW_CTRL)) ? 1 : 0;
+        }
+}
+
+/**
+ * netdev_set_pauseparam - set flow control parameters
+ * @dev:        Network device.
+ * @pause:      Ethtool PAUSE settings data structure.
+ *
+ * This function sets the PAUSE control flow settings.
+ * Not implemented yet.
+ *
+ * Return 0 if successful; otherwise an error code.
+ */
+static int netdev_set_pauseparam(struct net_device *dev,
+        struct ethtool_pauseparam *pause)
+{
+        struct dev_priv *priv = netdev_priv(dev);
+        struct dev_info *hw_priv = priv->adapter;
+        struct ksz_hw *hw = &hw_priv->hw;
+        struct ksz_port *port = &priv->port;
+
+        mutex_lock(&hw_priv->lock);
+        if (pause->autoneg) {
+                if (!pause->rx_pause && !pause->tx_pause)
+                        port->flow_ctrl = PHY_NO_FLOW_CTRL;
+                else
+                        port->flow_ctrl = PHY_FLOW_CTRL;
+                hw->overrides &= ~PAUSE_FLOW_CTRL;
+                port->force_link = 0;
+                if (hw->ksz_switch) {
+                        sw_cfg(hw, KS8842_SWITCH_CTRL_1_OFFSET,
+                                SWITCH_RX_FLOW_CTRL, 1);
+                        sw_cfg(hw, KS8842_SWITCH_CTRL_1_OFFSET,
+                                SWITCH_TX_FLOW_CTRL, 1);
+                }
+                port_set_link_speed(port);
+        } else {
+                hw->overrides |= PAUSE_FLOW_CTRL;
+                if (hw->ksz_switch) {
+                        sw_cfg(hw, KS8842_SWITCH_CTRL_1_OFFSET,
+                                SWITCH_RX_FLOW_CTRL, pause->rx_pause);
+                        sw_cfg(hw, KS8842_SWITCH_CTRL_1_OFFSET,
+                                SWITCH_TX_FLOW_CTRL, pause->tx_pause);
+                } else
+                        set_flow_ctrl(hw, pause->rx_pause, pause->tx_pause);
+        }
+        mutex_unlock(&hw_priv->lock);
+
+        return 0;
+}
+
+/**
+ * netdev_get_ringparam - get tx/rx ring parameters
+ * @dev:        Network device.
+ * @pause:      Ethtool RING settings data structure.
+ *
+ * This procedure returns the TX/RX ring settings.
+ */
+static void netdev_get_ringparam(struct net_device *dev,
+        struct ethtool_ringparam *ring)
+{
+        struct dev_priv *priv = netdev_priv(dev);
+        struct dev_info *hw_priv = priv->adapter;
+        struct ksz_hw *hw = &hw_priv->hw;
+
+        ring->tx_max_pending = (1 << 9);
+        ring->tx_pending = hw->tx_desc_info.alloc;
+        ring->rx_max_pending = (1 << 9);
+        ring->rx_pending = hw->rx_desc_info.alloc;
+}
+
+#define STATS_LEN                       (TOTAL_PORT_COUNTER_NUM)
+
+static struct {
+        char string[ETH_GSTRING_LEN];
+} ethtool_stats_keys[STATS_LEN] = {
+        { "rx_lo_priority_octets" },
+        { "rx_hi_priority_octets" },
+        { "rx_undersize_packets" },
+        { "rx_fragments" },
+        { "rx_oversize_packets" },
+        { "rx_jabbers" },
+        { "rx_symbol_errors" },
+        { "rx_crc_errors" },
+        { "rx_align_errors" },
+        { "rx_mac_ctrl_packets" },
+        { "rx_pause_packets" },
+        { "rx_bcast_packets" },
+        { "rx_mcast_packets" },
+        { "rx_ucast_packets" },
+        { "rx_64_or_less_octet_packets" },
+        { "rx_65_to_127_octet_packets" },
+        { "rx_128_to_255_octet_packets" },
+        { "rx_256_to_511_octet_packets" },
+        { "rx_512_to_1023_octet_packets" },
+        { "rx_1024_to_1522_octet_packets" },
+
+        { "tx_lo_priority_octets" },
+        { "tx_hi_priority_octets" },
+        { "tx_late_collisions" },
+        { "tx_pause_packets" },
+        { "tx_bcast_packets" },
+        { "tx_mcast_packets" },
+        { "tx_ucast_packets" },
+        { "tx_deferred" },
+        { "tx_total_collisions" },
+        { "tx_excessive_collisions" },
+        { "tx_single_collisions" },
+        { "tx_mult_collisions" },
+
+        { "rx_discards" },
+        { "tx_discards" },
+};
+
+/**
+ * netdev_get_strings - get statistics identity strings
+ * @dev:        Network device.
+ * @stringset:  String set identifier.
+ * @buf:        Buffer to store the strings.
+ *
+ * This procedure returns the strings used to identify the statistics.
+ */
+static void netdev_get_strings(struct net_device *dev, u32 stringset, u8 *buf)
+{
+        struct dev_priv *priv = netdev_priv(dev);
+        struct dev_info *hw_priv = priv->adapter;
+        struct ksz_hw *hw = &hw_priv->hw;
+
+        if (ETH_SS_STATS == stringset)
+                memcpy(buf, &ethtool_stats_keys,
+                        ETH_GSTRING_LEN * hw->mib_cnt);
+}
+
+/**
+ * netdev_get_sset_count - get statistics size
+ * @dev:        Network device.
+ * @sset:       The statistics set number.
+ *
+ * This function returns the size of the statistics to be reported.
+ *
+ * Return size of the statistics to be reported.
+ */
+static int netdev_get_sset_count(struct net_device *dev, int sset)
+{
+        struct dev_priv *priv = netdev_priv(dev);
+        struct dev_info *hw_priv = priv->adapter;
+        struct ksz_hw *hw = &hw_priv->hw;
+
+        switch (sset) {
+        case ETH_SS_STATS:
+                return hw->mib_cnt;
+        default:
+                return -EOPNOTSUPP;
+        }
+}
+
+/**
+ * netdev_get_ethtool_stats - get network device statistics
+ * @dev:        Network device.
+ * @stats:      Ethtool statistics data structure.
+ * @data:       Buffer to store the statistics.
+ *
+ * This procedure returns the statistics.
+ */
+static void netdev_get_ethtool_stats(struct net_device *dev,
+        struct ethtool_stats *stats, u64 *data)
+{
+        struct dev_priv *priv = netdev_priv(dev);
+        struct dev_info *hw_priv = priv->adapter;
+        struct ksz_hw *hw = &hw_priv->hw;
+        struct ksz_port *port = &priv->port;
+        int n_stats = stats->n_stats;
+        int i;
+        int n;
+        int p;
+        int rc;
+        u64 counter[TOTAL_PORT_COUNTER_NUM];
+
+        mutex_lock(&hw_priv->lock);
+        n = SWITCH_PORT_NUM;
+        for (i = 0, p = port->first_port; i < port->mib_port_cnt; i++, p++) {
+                if (media_connected == hw->port_mib[p].state) {
+                        hw_priv->counter[p].read = 1;
+
+                        /* Remember first port that requests read. */
+                        if (n == SWITCH_PORT_NUM)
+                                n = p;
+                }
+        }
+        mutex_unlock(&hw_priv->lock);
+
+        if (n < SWITCH_PORT_NUM)
+                schedule_work(&hw_priv->mib_read);
+
+        if (1 == port->mib_port_cnt && n < SWITCH_PORT_NUM) {
+                p = n;
+                rc = wait_event_interruptible_timeout(
+                        hw_priv->counter[p].counter,
+                        2 == hw_priv->counter[p].read,
+                        HZ * 1);
+        } else
+                for (i = 0, p = n; i < port->mib_port_cnt - n; i++, p++) {
+                        if (0 == i) {
+                                rc = wait_event_interruptible_timeout(
+                                        hw_priv->counter[p].counter,
+                                        2 == hw_priv->counter[p].read,
+                                        HZ * 2);
+                        } else if (hw->port_mib[p].cnt_ptr) {
+                                rc = wait_event_interruptible_timeout(
+                                        hw_priv->counter[p].counter,
+                                        2 == hw_priv->counter[p].read,
+                                        HZ * 1);
+                        }
+                }
+
+        get_mib_counters(hw, port->first_port, port->mib_port_cnt, counter);
+        n = hw->mib_cnt;
+        if (n > n_stats)
+                n = n_stats;
+        n_stats -= n;
+        for (i = 0; i < n; i++)
+                *data++ = counter[i];
+}
+
+/**
+ * netdev_get_rx_csum - get receive checksum support
+ * @dev:        Network device.
+ *
+ * This function gets receive checksum support setting.
+ *
+ * Return true if receive checksum is enabled; false otherwise.
+ */
+static u32 netdev_get_rx_csum(struct net_device *dev)
+{
+        struct dev_priv *priv = netdev_priv(dev);
+        struct dev_info *hw_priv = priv->adapter;
+        struct ksz_hw *hw = &hw_priv->hw;
+
+        return hw->rx_cfg &
+                (DMA_RX_CSUM_UDP |
+                DMA_RX_CSUM_TCP |
+                DMA_RX_CSUM_IP);
+}
+
+/**
+ * netdev_set_rx_csum - set receive checksum support
+ * @dev:        Network device.
+ * @data:       Zero to disable receive checksum support.
+ *
+ * This function sets receive checksum support setting.
+ *
+ * Return 0 if successful; otherwise an error code.
+ */
+static int netdev_set_rx_csum(struct net_device *dev, u32 data)
+{
+        struct dev_priv *priv = netdev_priv(dev);
+        struct dev_info *hw_priv = priv->adapter;
+        struct ksz_hw *hw = &hw_priv->hw;
+        u32 new_setting = hw->rx_cfg;
+
+        if (data)
+                new_setting |=
+                        (DMA_RX_CSUM_UDP | DMA_RX_CSUM_TCP |
+                        DMA_RX_CSUM_IP);
+        else
+                new_setting &=
+                        ~(DMA_RX_CSUM_UDP | DMA_RX_CSUM_TCP |
+                        DMA_RX_CSUM_IP);
+        new_setting &= ~DMA_RX_CSUM_UDP;
+        mutex_lock(&hw_priv->lock);
+        if (new_setting != hw->rx_cfg) {
+                hw->rx_cfg = new_setting;
+                if (hw->enabled)
+                        writel(hw->rx_cfg, hw->io + KS_DMA_RX_CTRL);
+        }
+        mutex_unlock(&hw_priv->lock);
+        return 0;
+}
+
+static struct ethtool_ops netdev_ethtool_ops = {
+        .get_settings           = netdev_get_settings,
+        .set_settings           = netdev_set_settings,
+        .nway_reset             = netdev_nway_reset,
+        .get_link               = netdev_get_link,
+        .get_drvinfo            = netdev_get_drvinfo,
+        .get_regs_len           = netdev_get_regs_len,
+        .get_regs               = netdev_get_regs,
+        .get_wol                = netdev_get_wol,
+        .set_wol                = netdev_set_wol,
+        .get_msglevel           = netdev_get_msglevel,
+        .set_msglevel           = netdev_set_msglevel,
+        .get_eeprom_len         = netdev_get_eeprom_len,
+        .get_eeprom             = netdev_get_eeprom,
+        .set_eeprom             = netdev_set_eeprom,
+        .get_pauseparam         = netdev_get_pauseparam,
+        .set_pauseparam         = netdev_set_pauseparam,
+        .get_ringparam          = netdev_get_ringparam,
+        .get_strings            = netdev_get_strings,
+        .get_sset_count         = netdev_get_sset_count,
+        .get_ethtool_stats      = netdev_get_ethtool_stats,
+        .get_rx_csum            = netdev_get_rx_csum,
+        .set_rx_csum            = netdev_set_rx_csum,
+        .get_tx_csum            = ethtool_op_get_tx_csum,
+        .set_tx_csum            = ethtool_op_set_tx_csum,
+        .get_sg                 = ethtool_op_get_sg,
+        .set_sg                 = ethtool_op_set_sg,
+};
+
+/*
+ * Hardware monitoring
+ */
+
+static void update_link(struct net_device *dev, struct dev_priv *priv,
+        struct ksz_port *port)
+{
+        if (priv->media_state != port->linked->state) {
+                priv->media_state = port->linked->state;
+                if (netif_running(dev)) {
+                        if (media_connected == priv->media_state)
+                                netif_carrier_on(dev);
+                        else
+                                netif_carrier_off(dev);
+                        if (netif_msg_link(priv))
+                                printk(KERN_INFO "%s link %s\n", dev->name,
+                                        (media_connected == priv->media_state ?
+                                        "on" : "off"));
+                }
+        }
+}
+
+static void mib_read_work(struct work_struct *work)
+{
+        struct dev_info *hw_priv =
+                container_of(work, struct dev_info, mib_read);
+        struct ksz_hw *hw = &hw_priv->hw;
+        struct ksz_port_mib *mib;
+        int i;
+
+        next_jiffies = jiffies;
+        for (i = 0; i < hw->mib_port_cnt; i++) {
+                mib = &hw->port_mib[i];
+
+                /* Reading MIB counters or requested to read. */
+                if (mib->cnt_ptr || 1 == hw_priv->counter[i].read) {
+
+                        /* Need to process receive interrupt. */
+                        if (port_r_cnt(hw, i))
+                                break;
+                        hw_priv->counter[i].read = 0;
+
+                        /* Finish reading counters. */
+                        if (0 == mib->cnt_ptr) {
+                                hw_priv->counter[i].read = 2;
+                                wake_up_interruptible(
+                                        &hw_priv->counter[i].counter);
+                        }
+                } else if (jiffies >= hw_priv->counter[i].time) {
+                        /* Only read MIB counters when the port is connected. */
+                        if (media_connected == mib->state)
+                                hw_priv->counter[i].read = 1;
+                        next_jiffies += HZ * 1 * hw->mib_port_cnt;
+                        hw_priv->counter[i].time = next_jiffies;
+
+                /* Port is just disconnected. */
+                } else if (mib->link_down) {
+                        mib->link_down = 0;
+
+                        /* Read counters one last time after link is lost. */
+                        hw_priv->counter[i].read = 1;
+                }
+        }
+}
+
+static void mib_monitor(unsigned long ptr)
+{
+        struct dev_info *hw_priv = (struct dev_info *) ptr;
+
+        mib_read_work(&hw_priv->mib_read);
+
+        /* This is used to verify Wake-on-LAN is working. */
+        if (hw_priv->pme_wait) {
+                if (hw_priv->pme_wait <= jiffies) {
+                        hw_clr_wol_pme_status(&hw_priv->hw);
+                        hw_priv->pme_wait = 0;
+                }
+        } else if (hw_chk_wol_pme_status(&hw_priv->hw)) {
+
+                /* PME is asserted.  Wait 2 seconds to clear it. */
+                hw_priv->pme_wait = jiffies + HZ * 2;
+        }
+
+        ksz_update_timer(&hw_priv->mib_timer_info);
+}
+
+/**
+ * dev_monitor - periodic monitoring
+ * @ptr:        Network device pointer.
+ *
+ * This routine is run in a kernel timer to monitor the network device.
+ */
+static void dev_monitor(unsigned long ptr)
+{
+        struct net_device *dev = (struct net_device *) ptr;
+        struct dev_priv *priv = netdev_priv(dev);
+        struct dev_info *hw_priv = priv->adapter;
+        struct ksz_hw *hw = &hw_priv->hw;
+        struct ksz_port *port = &priv->port;
+
+        if (!(hw->features & LINK_INT_WORKING))
+                port_get_link_speed(port);
+        update_link(dev, priv, port);
+
+        ksz_update_timer(&priv->monitor_timer_info);
+}
+
+/*
+ * Linux network device interface functions
+ */
+
+/* Driver exported variables */
+
+static int msg_enable;
+
+static char *macaddr = ":";
+static char *mac1addr = ":";
+
+/*
+ * This enables multiple network device mode for KSZ8842, which contains a
+ * switch with two physical ports.  Some users like to take control of the
+ * ports for running Spanning Tree Protocol.  The driver will create an
+ * additional eth? device for the other port.
+ *
+ * Some limitations are the network devices cannot have different MTU and
+ * multicast hash tables.
+ */
+static int multi_dev;
+
+/*
+ * As most users select multiple network device mode to use Spanning Tree
+ * Protocol, this enables a feature in which most unicast and multicast packets
+ * are forwarded inside the switch and not passed to the host.  Only packets
+ * that need the host's attention are passed to it.  This prevents the host
+ * wasting CPU time to examine each and every incoming packets and do the
+ * forwarding itself.
+ *
+ * As the hack requires the private bridge header, the driver cannot compile
+ * with just the kernel headers.
+ *
+ * Enabling STP support also turns on multiple network device mode.
+ */
+static int stp;
+
+/*
+ * This enables fast aging in the KSZ8842 switch.  Not sure what situation
+ * needs that.  However, fast aging is used to flush the dynamic MAC table when
+ * STP suport is enabled.
+ */
+static int fast_aging;
+
+/**
+ * netdev_init - initalize network device.
+ * @dev:        Network device.
+ *
+ * This function initializes the network device.
+ *
+ * Return 0 if successful; otherwise an error code indicating failure.
+ */
+static int __init netdev_init(struct net_device *dev)
+{
+        struct dev_priv *priv = netdev_priv(dev);
+
+        /* 500 ms timeout */
+        ksz_init_timer(&priv->monitor_timer_info, 500 * HZ / 1000,
+                dev_monitor, dev);
+
+        /* 500 ms timeout */
+        dev->watchdog_timeo = HZ / 2;
+
+        dev->features |= NETIF_F_IP_CSUM;
+
+        /*
+         * Hardware does not really support IPv6 checksum generation, but
+         * driver actually runs faster with this on.  Refer IPV6_CSUM_GEN_HACK.
+         */
+        dev->features |= NETIF_F_IPV6_CSUM;
+        dev->features |= NETIF_F_SG;
+
+        sema_init(&priv->proc_sem, 1);
+
+        priv->mii_if.phy_id_mask = 0x1;
+        priv->mii_if.reg_num_mask = 0x7;
+        priv->mii_if.dev = dev;
+        priv->mii_if.mdio_read = mdio_read;
+        priv->mii_if.mdio_write = mdio_write;
+        priv->mii_if.phy_id = priv->port.first_port + 1;
+
+        priv->msg_enable = netif_msg_init(msg_enable,
+                (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK));
+
+        return 0;
+}
+
+static const struct net_device_ops netdev_ops = {
+        .ndo_init               = netdev_init,
+        .ndo_open               = netdev_open,
+        .ndo_stop               = netdev_close,
+        .ndo_get_stats          = netdev_query_statistics,
+        .ndo_start_xmit         = netdev_tx,
+        .ndo_tx_timeout         = netdev_tx_timeout,
+        .ndo_change_mtu         = netdev_change_mtu,
+        .ndo_set_mac_address    = netdev_set_mac_address,
+        .ndo_do_ioctl           = netdev_ioctl,
+        .ndo_set_rx_mode        = netdev_set_rx_mode,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+        .ndo_poll_controller    = netdev_netpoll,
+#endif
+};
+
+static void netdev_free(struct net_device *dev)
+{
+        if (dev->watchdog_timeo)
+                unregister_netdev(dev);
+
+        free_netdev(dev);
+}
+
+struct platform_info {
+        struct dev_info dev_info;
+        struct net_device *netdev[SWITCH_PORT_NUM];
+};
+
+static int net_device_present;
+
+static void get_mac_addr(struct dev_info *hw_priv, u8 *macaddr, int port)
+{
+        int i;
+        int j;
+        int got_num;
+        int num;
+
+        i = j = num = got_num = 0;
+        while (j < MAC_ADDR_LEN) {
+                if (macaddr[i]) {
+                        got_num = 1;
+                        if ('0' <= macaddr[i] && macaddr[i] <= '9')
+                                num = num * 16 + macaddr[i] - '0';
+                        else if ('A' <= macaddr[i] && macaddr[i] <= 'F')
+                                num = num * 16 + 10 + macaddr[i] - 'A';
+                        else if ('a' <= macaddr[i] && macaddr[i] <= 'f')
+                                num = num * 16 + 10 + macaddr[i] - 'a';
+                        else if (':' == macaddr[i])
+                                got_num = 2;
+                        else
+                                break;
+                } else if (got_num)
+                        got_num = 2;
+                else
+                        break;
+                if (2 == got_num) {
+                        if (MAIN_PORT == port) {
+                                hw_priv->hw.override_addr[j++] = (u8) num;
+                                hw_priv->hw.override_addr[5] +=
+                                        hw_priv->hw.id;
+                        } else {
+                                hw_priv->hw.ksz_switch->other_addr[j++] =
+                                        (u8) num;
+                                hw_priv->hw.ksz_switch->other_addr[5] +=
+                                        hw_priv->hw.id;
+                        }
+                        num = got_num = 0;
+                }
+                i++;
+        }
+        if (MAC_ADDR_LEN == j) {
+                if (MAIN_PORT == port)
+                        hw_priv->hw.mac_override = 1;
+        }
+}
+
+#define KS884X_DMA_MASK                 (~0x0UL)
+
+static void read_other_addr(struct ksz_hw *hw)
+{
+        int i;
+        u16 data[3];
+        struct ksz_switch *sw = hw->ksz_switch;
+
+        for (i = 0; i < 3; i++)
+                data[i] = eeprom_read(hw, i + EEPROM_DATA_OTHER_MAC_ADDR);
+        if ((data[0] || data[1] || data[2]) && data[0] != 0xffff) {
+                sw->other_addr[5] = (u8) data[0];
+                sw->other_addr[4] = (u8)(data[0] >> 8);
+                sw->other_addr[3] = (u8) data[1];
+                sw->other_addr[2] = (u8)(data[1] >> 8);
+                sw->other_addr[1] = (u8) data[2];
+                sw->other_addr[0] = (u8)(data[2] >> 8);
+        }
+}
+
+#ifndef PCI_VENDOR_ID_MICREL_KS
+#define PCI_VENDOR_ID_MICREL_KS         0x16c6
+#endif
+
+static int __init pcidev_init(struct pci_dev *pdev,
+        const struct pci_device_id *id)
+{
+        struct net_device *dev;
+        struct dev_priv *priv;
+        struct dev_info *hw_priv;
+        struct ksz_hw *hw;
+        struct platform_info *info;
+        struct ksz_port *port;
+        unsigned long reg_base;
+        unsigned long reg_len;
+        int cnt;
+        int i;
+        int mib_port_count;
+        int pi;
+        int port_count;
+        int result;
+        char banner[80];
+        struct ksz_switch *sw = NULL;
+
+        result = pci_enable_device(pdev);
+        if (result)
+                return result;
+
+        result = -ENODEV;
+
+        if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) ||
+                        pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)))
+                return result;
+
+        reg_base = pci_resource_start(pdev, 0);
+        reg_len = pci_resource_len(pdev, 0);
+        if ((pci_resource_flags(pdev, 0) & IORESOURCE_IO) != 0)
+                return result;
+
+        if (!request_mem_region(reg_base, reg_len, DRV_NAME))
+                return result;
+        pci_set_master(pdev);
+
+        result = -ENOMEM;
+
+        info = kmalloc(sizeof(struct platform_info), GFP_KERNEL);
+        if (!info)
+                goto pcidev_init_dev_err;
+        memset(info, 0, sizeof(struct platform_info));
+
+        hw_priv = &info->dev_info;
+        hw_priv->pdev = pdev;
+
+        hw = &hw_priv->hw;
+
+        hw->io = ioremap(reg_base, reg_len);
+        if (!hw->io)
+                goto pcidev_init_io_err;
+
+        cnt = hw_init(hw);
+        if (!cnt) {
+                if (msg_enable & NETIF_MSG_PROBE)
+                        printk(KERN_ALERT "chip not detected\n");
+                result = -ENODEV;
+                goto pcidev_init_alloc_err;
+        }
+
+        sprintf(banner, "%s\n", version);
+        banner[13] = cnt + '0';
+        ks_info(hw_priv, "%s", banner);
+        ks_dbg(hw_priv, "Mem = %p; IRQ = %d\n", hw->io, pdev->irq);
+
+        /* Assume device is KSZ8841. */
+        hw->dev_count = 1;
+        port_count = 1;
+        mib_port_count = 1;
+        hw->addr_list_size = 0;
+        hw->mib_cnt = PORT_COUNTER_NUM;
+        hw->mib_port_cnt = 1;
+
+        /* KSZ8842 has a switch with multiple ports. */
+        if (2 == cnt) {
+                if (fast_aging)
+                        hw->overrides |= FAST_AGING;
+
+                hw->mib_cnt = TOTAL_PORT_COUNTER_NUM;
+
+                /* Multiple network device interfaces are required. */
+                if (multi_dev) {
+                        hw->dev_count = SWITCH_PORT_NUM;
+                        hw->addr_list_size = SWITCH_PORT_NUM - 1;
+                }
+
+                /* Single network device has multiple ports. */
+                if (1 == hw->dev_count) {
+                        port_count = SWITCH_PORT_NUM;
+                        mib_port_count = SWITCH_PORT_NUM;
+                }
+                hw->mib_port_cnt = TOTAL_PORT_NUM;
+                hw->ksz_switch = kmalloc(sizeof(struct ksz_switch), GFP_KERNEL);
+                if (!hw->ksz_switch)
+                        goto pcidev_init_alloc_err;
+                memset(hw->ksz_switch, 0, sizeof(struct ksz_switch));
+
+                sw = hw->ksz_switch;
+        }
+        for (i = 0; i < hw->mib_port_cnt; i++)
+                hw->port_mib[i].mib_start = 0;
+
+        hw->parent = hw_priv;
+
+        /* Default MTU is 1500. */
+        hw_priv->mtu = (REGULAR_RX_BUF_SIZE + 3) & ~3;
+
+        if (ksz_alloc_mem(hw_priv))
+                goto pcidev_init_mem_err;
+
+        hw_priv->hw.id = net_device_present;
+
+        spin_lock_init(&hw_priv->hwlock);
+        mutex_init(&hw_priv->lock);
+
+        /* tasklet is enabled. */
+        tasklet_init(&hw_priv->rx_tasklet, rx_proc_task,
+                (unsigned long) hw_priv);
+        tasklet_init(&hw_priv->tx_tasklet, tx_proc_task,
+                (unsigned long) hw_priv);
+
+        /* tasklet_enable will decrement the atomic counter. */
+        tasklet_disable(&hw_priv->rx_tasklet);
+        tasklet_disable(&hw_priv->tx_tasklet);
+
+        for (i = 0; i < TOTAL_PORT_NUM; i++)
+                init_waitqueue_head(&hw_priv->counter[i].counter);
+
+        if (macaddr[0] != ':')
+                get_mac_addr(hw_priv, macaddr, MAIN_PORT);
+
+        /* Read MAC address and initialize override address if not overrided. */
+        hw_read_addr(hw);
+
+        /* Multiple device interfaces mode requires a second MAC address. */
+        if (hw->dev_count > 1) {
+                memcpy(sw->other_addr, hw->override_addr, MAC_ADDR_LEN);
+                read_other_addr(hw);
+                if (mac1addr[0] != ':')
+                        get_mac_addr(hw_priv, mac1addr, OTHER_PORT);
+        }
+
+        hw_setup(hw);
+        if (hw->ksz_switch)
+                sw_setup(hw);
+        else {
+                hw_priv->wol_support = WOL_SUPPORT;
+                hw_priv->wol_enable = 0;
+        }
+
+        INIT_WORK(&hw_priv->mib_read, mib_read_work);
+
+        /* 500 ms timeout */
+        ksz_init_timer(&hw_priv->mib_timer_info, 500 * HZ / 1000,
+                mib_monitor, hw_priv);
+
+        for (i = 0; i < hw->dev_count; i++) {
+                dev = alloc_etherdev(sizeof(struct dev_priv));
+                if (!dev)
+                        goto pcidev_init_reg_err;
+                info->netdev[i] = dev;
+
+                priv = netdev_priv(dev);
+                priv->adapter = hw_priv;
+                priv->id = net_device_present++;
+
+                port = &priv->port;
+                port->port_cnt = port_count;
+                port->mib_port_cnt = mib_port_count;
+                port->first_port = i;
+                port->flow_ctrl = PHY_FLOW_CTRL;
+
+                port->hw = hw;
+                port->linked = &hw->port_info[port->first_port];
+
+                for (cnt = 0, pi = i; cnt < port_count; cnt++, pi++) {
+                        hw->port_info[pi].port_id = pi;
+                        hw->port_info[pi].pdev = dev;
+                        hw->port_info[pi].state = media_disconnected;
+                }
+
+                dev->mem_start = (unsigned long) hw->io;
+                dev->mem_end = dev->mem_start + reg_len - 1;
+                dev->irq = pdev->irq;
+                if (MAIN_PORT == i)
+                        memcpy(dev->dev_addr, hw_priv->hw.override_addr,
+                                MAC_ADDR_LEN);
+                else {
+                        memcpy(dev->dev_addr, sw->other_addr,
+                                MAC_ADDR_LEN);
+                        if (!memcmp(sw->other_addr, hw->override_addr,
+                                        MAC_ADDR_LEN))
+                                dev->dev_addr[5] += port->first_port;
+                }
+
+                dev->netdev_ops = &netdev_ops;
+                SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops);
+                if (register_netdev(dev))
+                        goto pcidev_init_reg_err;
+                port_set_power_saving(port, true);
+        }
+
+        pci_dev_get(hw_priv->pdev);
+        pci_set_drvdata(pdev, info);
+        return 0;
+
+pcidev_init_reg_err:
+        for (i = 0; i < hw->dev_count; i++) {
+                if (info->netdev[i]) {
+                        netdev_free(info->netdev[i]);
+                        info->netdev[i] = NULL;
+                }
+        }
+
+pcidev_init_mem_err:
+        ksz_free_mem(hw_priv);
+        kfree(hw->ksz_switch);
+
+pcidev_init_alloc_err:
+        iounmap(hw->io);
+
+pcidev_init_io_err:
+        kfree(info);
+
+pcidev_init_dev_err:
+        release_mem_region(reg_base, reg_len);
+
+        return result;
+}
+
+static void pcidev_exit(struct pci_dev *pdev)
+{
+        int i;
+        struct platform_info *info = pci_get_drvdata(pdev);
+        struct dev_info *hw_priv = &info->dev_info;
+
+        pci_set_drvdata(pdev, NULL);
+
+        release_mem_region(pci_resource_start(pdev, 0),
+                pci_resource_len(pdev, 0));
+        for (i = 0; i < hw_priv->hw.dev_count; i++) {
+                if (info->netdev[i])
+                        netdev_free(info->netdev[i]);
+        }
+        if (hw_priv->hw.io)
+                iounmap(hw_priv->hw.io);
+        ksz_free_mem(hw_priv);
+        kfree(hw_priv->hw.ksz_switch);
+        pci_dev_put(hw_priv->pdev);
+        kfree(info);
+}
+
+#ifdef CONFIG_PM
+static int pcidev_resume(struct pci_dev *pdev)
+{
+        int i;
+        struct platform_info *info = pci_get_drvdata(pdev);
+        struct dev_info *hw_priv = &info->dev_info;
+        struct ksz_hw *hw = &hw_priv->hw;
+
+        pci_set_power_state(pdev, PCI_D0);
+        pci_restore_state(pdev);
+        pci_enable_wake(pdev, PCI_D0, 0);
+
+        if (hw_priv->wol_enable)
+                hw_cfg_wol_pme(hw, 0);
+        for (i = 0; i < hw->dev_count; i++) {
+                if (info->netdev[i]) {
+                        struct net_device *dev = info->netdev[i];
+
+                        if (netif_running(dev)) {
+                                netdev_open(dev);
+                                netif_device_attach(dev);
+                        }
+                }
+        }
+        return 0;
+}
+
+static int pcidev_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+        int i;
+        struct platform_info *info = pci_get_drvdata(pdev);
+        struct dev_info *hw_priv = &info->dev_info;
+        struct ksz_hw *hw = &hw_priv->hw;
+
+        /* Need to find a way to retrieve the device IP address. */
+        u8 net_addr[] = { 192, 168, 1, 1 };
+
+        for (i = 0; i < hw->dev_count; i++) {
+                if (info->netdev[i]) {
+                        struct net_device *dev = info->netdev[i];
+
+                        if (netif_running(dev)) {
+                                netif_device_detach(dev);
+                                netdev_close(dev);
+                        }
+                }
+        }
+        if (hw_priv->wol_enable) {
+                hw_enable_wol(hw, hw_priv->wol_enable, net_addr);
+                hw_cfg_wol_pme(hw, 1);
+        }
+
+        pci_save_state(pdev);
+        pci_enable_wake(pdev, pci_choose_state(pdev, state), 1);
+        pci_set_power_state(pdev, pci_choose_state(pdev, state));
+        return 0;
+}
+#endif
+
+static char pcidev_name[] = "ksz884xp";
+
+static struct pci_device_id pcidev_table[] = {
+        { PCI_VENDOR_ID_MICREL_KS, 0x8841,
+                PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+        { PCI_VENDOR_ID_MICREL_KS, 0x8842,
+                PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+        { 0 }
+};
+
+MODULE_DEVICE_TABLE(pci, pcidev_table);
+
+static struct pci_driver pci_device_driver = {
+#ifdef CONFIG_PM
+        .suspend        = pcidev_suspend,
+        .resume         = pcidev_resume,
+#endif
+        .name           = pcidev_name,
+        .id_table       = pcidev_table,
+        .probe          = pcidev_init,
+        .remove         = pcidev_exit
+};
+
+static int __init ksz884x_init_module(void)
+{
+        return pci_register_driver(&pci_device_driver);
+}
+
+static void __exit ksz884x_cleanup_module(void)
+{
+        pci_unregister_driver(&pci_device_driver);
+}
+
+module_init(ksz884x_init_module);
+module_exit(ksz884x_cleanup_module);
+
+MODULE_DESCRIPTION("KSZ8841/2 PCI network driver");
+MODULE_AUTHOR("Tristram Ha <Tristram.Ha@micrel.com>");
+MODULE_LICENSE("GPL");
+
+module_param_named(message, msg_enable, int, 0);
+MODULE_PARM_DESC(message, "Message verbosity level (0=none, 31=all)");
+
+module_param(macaddr, charp, 0);
+module_param(mac1addr, charp, 0);
+module_param(fast_aging, int, 0);
+module_param(multi_dev, int, 0);
+module_param(stp, int, 0);
+MODULE_PARM_DESC(macaddr, "MAC address");
+MODULE_PARM_DESC(mac1addr, "Second MAC address");
+MODULE_PARM_DESC(fast_aging, "Fast aging");
+MODULE_PARM_DESC(multi_dev, "Multiple device interfaces");
+MODULE_PARM_DESC(stp, "STP support");