20 files changed, 77 insertions, 107 deletions

diff --git a/drivers/net/wireless/adm8211.c b/drivers/net/wireless/adm8211.c
index d93a1de77eb0..7af5d8851f67 100644
--- a/drivers/net/wireless/adm8211.c
+++ b/drivers/net/wireless/adm8211.c
@@ -445,9 +445,9 @@ static void adm8211_interrupt_rci(struct ieee80211_hw *dev)
                         struct ieee80211_rx_status rx_status = {0};
 
                         if (priv->pdev->revision < ADM8211_REV_CA)
-                                rx_status.ssi = rssi;
+                                rx_status.signal = rssi;
                         else
-                                rx_status.ssi = 100 - rssi;
+                                rx_status.signal = 100 - rssi;
 
                         rx_status.rate_idx = rate;
 
@@ -1893,9 +1893,10 @@ static int __devinit adm8211_probe(struct pci_dev *pdev,
 
         dev->extra_tx_headroom = sizeof(struct adm8211_tx_hdr);
         /* dev->flags = IEEE80211_HW_RX_INCLUDES_FCS in promisc mode */
+        dev->flags = IEEE80211_HW_SIGNAL_UNSPEC;
 
         dev->channel_change_time = 1000;
-        dev->max_rssi = 100;    /* FIXME: find better value */
+        dev->max_signal = 100;    /* FIXME: find better value */
 
         dev->queues = 1; /* ADM8211C supports more, maybe ADM8211B too */
 
diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c
index 3201c1604340..dd8adaddd7a0 100644
--- a/drivers/net/wireless/ath5k/base.c
+++ b/drivers/net/wireless/ath5k/base.c
@@ -458,13 +458,11 @@ ath5k_pci_probe(struct pci_dev *pdev,
 
         /* Initialize driver private data */
         SET_IEEE80211_DEV(hw, &pdev->dev);
-        hw->flags = IEEE80211_HW_RX_INCLUDES_FCS;
+        hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
+                    IEEE80211_HW_SIGNAL_DBM |
+                    IEEE80211_HW_NOISE_DBM;
         hw->extra_tx_headroom = 2;
         hw->channel_change_time = 5000;
-        /* these names are misleading */
-        hw->max_rssi = -110; /* signal in dBm */
-        hw->max_noise = -110; /* noise in dBm */
-        hw->max_signal = 100; /* we will provide a percentage based on rssi */
         sc = hw->priv;
         sc->hw = hw;
         sc->pdev = pdev;
@@ -1893,20 +1891,9 @@ accept:
                 rxs.freq = sc->curchan->center_freq;
                 rxs.band = sc->curband->band;
 
-                /*
-                 * signal quality:
-                 * the names here are misleading and the usage of these
-                 * values by iwconfig makes it even worse
-                 */
-                /* noise floor in dBm, from the last noise calibration */
                 rxs.noise = sc->ah->ah_noise_floor;
-                /* signal level in dBm */
-                rxs.ssi = rxs.noise + rs.rs_rssi;
-                /*
-                 * "signal" is actually displayed as Link Quality by iwconfig
-                 * we provide a percentage based on rssi (assuming max rssi 64)
-                 */
-                rxs.signal = rs.rs_rssi * 100 / 64;
+                rxs.signal = rxs.noise + rs.rs_rssi;
+                rxs.qual = rs.rs_rssi * 100 / 64;
 
                 rxs.antenna = rs.rs_antenna;
                 rxs.rate_idx = ath5k_hw_to_driver_rix(sc, rs.rs_rate);
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 7c23aa8705c2..fc23ba5309bd 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -4466,10 +4466,10 @@ static int b43_wireless_init(struct ssb_device *dev)
 
         /* fill hw info */
         hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
-                    IEEE80211_HW_RX_INCLUDES_FCS;
-        hw->max_signal = 100;
-        hw->max_rssi = -110;
-        hw->max_noise = -110;
+                    IEEE80211_HW_RX_INCLUDES_FCS |
+                    IEEE80211_HW_SIGNAL_DBM |
+                    IEEE80211_HW_NOISE_DBM;
+
         hw->queues = b43_modparam_qos ? 4 : 1;
         SET_IEEE80211_DEV(hw, dev->dev);
         if (is_valid_ether_addr(sprom->et1mac))
diff --git a/drivers/net/wireless/b43/xmit.c b/drivers/net/wireless/b43/xmit.c
index 88491947a209..afce9338d83a 100644
--- a/drivers/net/wireless/b43/xmit.c
+++ b/drivers/net/wireless/b43/xmit.c
@@ -581,12 +581,11 @@ void b43_rx(struct b43_wldev *dev, struct sk_buff *skb, const void *_rxhdr)
                 //      and also find out what the maximum possible value is.
                 //      Fill status.ssi and status.signal fields.
         } else {
-                status.ssi = b43_rssi_postprocess(dev, rxhdr->jssi,
+                status.signal = b43_rssi_postprocess(dev, rxhdr->jssi,
                                                   (phystat0 & B43_RX_PHYST0_OFDM),
                                                   (phystat0 & B43_RX_PHYST0_GAINCTL),
                                                   (phystat3 & B43_RX_PHYST3_TRSTATE));
-                /* the next line looks wrong, but is what mac80211 wants */
-                status.signal = (rxhdr->jssi * 100) / B43_RX_MAX_SSI;
+                status.qual = (rxhdr->jssi * 100) / B43_RX_MAX_SSI;
         }
 
         if (phystat0 & B43_RX_PHYST0_OFDM)
diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c
index d3820dce3c43..7755c59e0803 100644
--- a/drivers/net/wireless/b43legacy/main.c
+++ b/drivers/net/wireless/b43legacy/main.c
@@ -3718,10 +3718,9 @@ static int b43legacy_wireless_init(struct ssb_device *dev)
 
         /* fill hw info */
         hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
-                    IEEE80211_HW_RX_INCLUDES_FCS;
-        hw->max_signal = 100;
-        hw->max_rssi = -110;
-        hw->max_noise = -110;
+                    IEEE80211_HW_RX_INCLUDES_FCS |
+                    IEEE80211_HW_SIGNAL_DBM |
+                    IEEE80211_HW_NOISE_DBM;
         hw->queues = 1; /* FIXME: hardware has more queues */
         SET_IEEE80211_DEV(hw, dev->dev);
         if (is_valid_ether_addr(sprom->et1mac))
diff --git a/drivers/net/wireless/b43legacy/xmit.c b/drivers/net/wireless/b43legacy/xmit.c
index fc83dab6e2c7..bed9e041d6c5 100644
--- a/drivers/net/wireless/b43legacy/xmit.c
+++ b/drivers/net/wireless/b43legacy/xmit.c
@@ -532,12 +532,12 @@ void b43legacy_rx(struct b43legacy_wldev *dev,
                 }
         }
 
-        status.ssi = b43legacy_rssi_postprocess(dev, jssi,
+        status.signal = b43legacy_rssi_postprocess(dev, jssi,
                                       (phystat0 & B43legacy_RX_PHYST0_OFDM),
                                       (phystat0 & B43legacy_RX_PHYST0_GAINCTL),
                                       (phystat3 & B43legacy_RX_PHYST3_TRSTATE));
         status.noise = dev->stats.link_noise;
-        status.signal = (jssi * 100) / B43legacy_RX_MAX_SSI;
+        status.qual = (jssi * 100) / B43legacy_RX_MAX_SSI;
         /* change to support A PHY */
         if (phystat0 & B43legacy_RX_PHYST0_OFDM)
                 status.rate_idx = b43legacy_plcp_get_bitrate_idx_ofdm(plcp, false);
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c
index 8464397f7816..d7beeff2642c 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945.c
+++ b/drivers/net/wireless/iwlwifi/iwl-3945.c
@@ -520,7 +520,7 @@ static void iwl3945_add_radiotap(struct iwl3945_priv *priv,
 {
         /* First cache any information we need before we overwrite
          * the information provided in the skb from the hardware */
-        s8 signal = stats->ssi;
+        s8 signal = stats->signal;
         s8 noise = 0;
         int rate = stats->rate_idx;
         u64 tsf = stats->mactime;
@@ -693,7 +693,7 @@ static void iwl3945_rx_reply_rx(struct iwl3945_priv *priv,
         }
 
         /* Convert 3945's rssi indicator to dBm */
-        rx_status.ssi = rx_stats->rssi - IWL_RSSI_OFFSET;
+        rx_status.signal = rx_stats->rssi - IWL_RSSI_OFFSET;
 
         /* Set default noise value to -127 */
         if (priv->last_rx_noise == 0)
@@ -712,21 +712,21 @@ static void iwl3945_rx_reply_rx(struct iwl3945_priv *priv,
          * Calculate rx_status.signal (quality indicator in %) based on SNR. */
         if (rx_stats_noise_diff) {
                 snr = rx_stats_sig_avg / rx_stats_noise_diff;
-                rx_status.noise = rx_status.ssi -
+                rx_status.noise = rx_status.signal -
                                         iwl3945_calc_db_from_ratio(snr);
-                rx_status.signal = iwl3945_calc_sig_qual(rx_status.ssi,
+                rx_status.qual = iwl3945_calc_sig_qual(rx_status.signal,
                                                          rx_status.noise);
 
         /* If noise info not available, calculate signal quality indicator (%)
          *   using just the dBm signal level. */
         } else {
                 rx_status.noise = priv->last_rx_noise;
-                rx_status.signal = iwl3945_calc_sig_qual(rx_status.ssi, 0);
+                rx_status.qual = iwl3945_calc_sig_qual(rx_status.signal, 0);
         }
 
 
         IWL_DEBUG_STATS("Rssi %d noise %d qual %d sig_avg %d noise_diff %d\n",
-                        rx_status.ssi, rx_status.noise, rx_status.signal,
+                        rx_status.signal, rx_status.noise, rx_status.qual,
                         rx_stats_sig_avg, rx_stats_noise_diff);
 
         header = (struct ieee80211_hdr *)IWL_RX_DATA(pkt);
@@ -736,8 +736,8 @@ static void iwl3945_rx_reply_rx(struct iwl3945_priv *priv,
         IWL_DEBUG_STATS_LIMIT("[%c] %d RSSI:%d Signal:%u, Noise:%u, Rate:%u\n",
                               network_packet ? '*' : ' ',
                               le16_to_cpu(rx_hdr->channel),
-                              rx_status.ssi, rx_status.ssi,
-                              rx_status.ssi, rx_status.rate_idx);
+                              rx_status.signal, rx_status.signal,
+                              rx_status.noise, rx_status.rate_idx);
 
 #ifdef CONFIG_IWL3945_DEBUG
         if (iwl3945_debug_level & (IWL_DL_RX))
@@ -748,7 +748,7 @@ static void iwl3945_rx_reply_rx(struct iwl3945_priv *priv,
         if (network_packet) {
                 priv->last_beacon_time = le32_to_cpu(rx_end->beacon_timestamp);
                 priv->last_tsf = le64_to_cpu(rx_end->timestamp);
-                priv->last_rx_rssi = rx_status.ssi;
+                priv->last_rx_rssi = rx_status.signal;
                 priv->last_rx_noise = rx_status.noise;
         }
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c
index b7036e011457..45cbd7789bd0 100644
--- a/drivers/net/wireless/iwlwifi/iwl-4965.c
+++ b/drivers/net/wireless/iwlwifi/iwl-4965.c
@@ -2362,7 +2362,7 @@ static void iwl4965_add_radiotap(struct iwl_priv *priv,
                                  struct ieee80211_rx_status *stats,
                                  u32 ampdu_status)
 {
-        s8 signal = stats->ssi;
+        s8 signal = stats->signal;
         s8 noise = 0;
         int rate = stats->rate_idx;
         u64 tsf = stats->mactime;
@@ -2963,7 +2963,7 @@ static void iwl4965_rx_reply_rx(struct iwl_priv *priv,
         priv->ucode_beacon_time = le32_to_cpu(rx_start->beacon_time_stamp);
 
         /* Find max signal strength (dBm) among 3 antenna/receiver chains */
-        rx_status.ssi = iwl4965_calc_rssi(priv, rx_start);
+        rx_status.signal = iwl4965_calc_rssi(priv, rx_start);
 
         /* Meaningful noise values are available only from beacon statistics,
          *   which are gathered only when associated, and indicate noise
@@ -2972,11 +2972,11 @@ static void iwl4965_rx_reply_rx(struct iwl_priv *priv,
         if (iwl_is_associated(priv) &&
             !test_bit(STATUS_SCANNING, &priv->status)) {
                 rx_status.noise = priv->last_rx_noise;
-                rx_status.signal = iwl4965_calc_sig_qual(rx_status.ssi,
+                rx_status.qual = iwl4965_calc_sig_qual(rx_status.signal,
                                                          rx_status.noise);
         } else {
                 rx_status.noise = IWL_NOISE_MEAS_NOT_AVAILABLE;
-                rx_status.signal = iwl4965_calc_sig_qual(rx_status.ssi, 0);
+                rx_status.qual = iwl4965_calc_sig_qual(rx_status.signal, 0);
         }
 
         /* Reset beacon noise level if not associated. */
@@ -2988,7 +2988,7 @@ static void iwl4965_rx_reply_rx(struct iwl_priv *priv,
         iwl4965_dbg_report_frame(priv, pkt, header, 1);
 
         IWL_DEBUG_STATS_LIMIT("Rssi %d, noise %d, qual %d, TSF %llu\n",
-                              rx_status.ssi, rx_status.noise, rx_status.signal,
+                              rx_status.signal, rx_status.noise, rx_status.signal,
                               (unsigned long long)rx_status.mactime);
 
 
@@ -3000,7 +3000,7 @@ static void iwl4965_rx_reply_rx(struct iwl_priv *priv,
 
         network_packet = iwl4965_is_network_packet(priv, header);
         if (network_packet) {
-                priv->last_rx_rssi = rx_status.ssi;
+                priv->last_rx_rssi = rx_status.signal;
                 priv->last_beacon_time =  priv->ucode_beacon_time;
                 priv->last_tsf = le64_to_cpu(rx_start->timestamp);
         }
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index 27e56b89d940..d3cbad2bf877 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -746,18 +746,10 @@ static void iwlcore_init_hw(struct iwl_priv *priv)
         struct ieee80211_hw *hw = priv->hw;
         hw->rate_control_algorithm = "iwl-4965-rs";
 
-        /* Tell mac80211 and its clients (e.g. Wireless Extensions)
-         *       the range of signal quality values that we'll provide.
-         * Negative values for level/noise indicate that we'll provide dBm.
-         * For WE, at least, non-0 values here *enable* display of values
-         *       in app (iwconfig). */
-        hw->max_rssi = -20; /* signal level, negative indicates dBm */
-        hw->max_noise = -20;    /* noise level, negative indicates dBm */
-        hw->max_signal = 100;   /* link quality indication (%) */
-
-        /* Tell mac80211 our Tx characteristics */
-        hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE;
-
+        /* Tell mac80211 our characteristics */
+        hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
+                    IEEE80211_HW_SIGNAL_DBM |
+                    IEEE80211_HW_NOISE_DBM;
         /* Default value; 4 EDCA QOS priorities */
         hw->queues = 4;
 #ifdef CONFIG_IWL4965_HT
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index 4baa185ba500..c1234ff4fc98 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -8029,17 +8029,10 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e
 
         priv->ibss_beacon = NULL;
 
-        /* Tell mac80211 and its clients (e.g. Wireless Extensions)
-         *   the range of signal quality values that we'll provide.
-         * Negative values for level/noise indicate that we'll provide dBm.
-         * For WE, at least, non-0 values here *enable* display of values
-         *   in app (iwconfig). */
-        hw->max_rssi = -20;     /* signal level, negative indicates dBm */
-        hw->max_noise = -20;    /* noise level, negative indicates dBm */
-        hw->max_signal = 100;   /* link quality indication (%) */
-
-        /* Tell mac80211 our Tx characteristics */
-        hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE;
+        /* Tell mac80211 our characteristics */
+        hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
+                    IEEE80211_HW_SIGNAL_DBM |
+                    IEEE80211_HW_NOISE_DBM;
 
         /* 4 EDCA QOS priorities */
         hw->queues = 4;
diff --git a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c
index 33d608a60d79..9cbef5bce0f6 100644
--- a/drivers/net/wireless/p54/p54common.c
+++ b/drivers/net/wireless/p54/p54common.c
@@ -355,7 +355,7 @@ static void p54_rx_data(struct ieee80211_hw *dev, struct sk_buff *skb)
         struct ieee80211_rx_status rx_status = {0};
         u16 freq = le16_to_cpu(hdr->freq);
 
-        rx_status.ssi = hdr->rssi;
+        rx_status.signal = hdr->rssi;
         /* XX correct? */
         rx_status.rate_idx = hdr->rate & 0xf;
         rx_status.freq = freq;
@@ -1000,9 +1000,10 @@ struct ieee80211_hw *p54_init_common(size_t priv_data_len)
         skb_queue_head_init(&priv->tx_queue);
         dev->wiphy->bands[IEEE80211_BAND_2GHZ] = &band_2GHz;
         dev->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | /* not sure */
-                    IEEE80211_HW_RX_INCLUDES_FCS;
+                     IEEE80211_HW_RX_INCLUDES_FCS |
+                     IEEE80211_HW_SIGNAL_UNSPEC;
         dev->channel_change_time = 1000;        /* TODO: find actual value */
-        dev->max_rssi = 127;
+        dev->max_signal = 127;
 
         priv->tx_stats[0].limit = 5;
         dev->queues = 1;
diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c
index 247fbbfb0f2b..afa565c63621 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.c
+++ b/drivers/net/wireless/rt2x00/rt2400pci.c
@@ -1361,10 +1361,9 @@ static void rt2400pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
         /*
          * Initialize all hw fields.
          */
-        rt2x00dev->hw->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING;
+        rt2x00dev->hw->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
+                               IEEE80211_HW_SIGNAL_DBM;
         rt2x00dev->hw->extra_tx_headroom = 0;
-        rt2x00dev->hw->max_signal = MAX_SIGNAL;
-        rt2x00dev->hw->max_rssi = MAX_RX_SSI;
         rt2x00dev->hw->queues = 2;
 
         SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_pci(rt2x00dev)->dev);
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c
index 0d53c75d55dd..c06f1b5e5887 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/rt2x00/rt2500pci.c
@@ -1680,10 +1680,10 @@ static void rt2500pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
         /*
          * Initialize all hw fields.
          */
-        rt2x00dev->hw->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING;
+        rt2x00dev->hw->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
+                               IEEE80211_HW_SIGNAL_DBM;
+
         rt2x00dev->hw->extra_tx_headroom = 0;
-        rt2x00dev->hw->max_signal = MAX_SIGNAL;
-        rt2x00dev->hw->max_rssi = MAX_RX_SSI;
         rt2x00dev->hw->queues = 2;
 
         SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_pci(rt2x00dev)->dev);
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index 80b34d47114a..88bafdf8f0fa 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -1587,10 +1587,10 @@ static void rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
         rt2x00dev->hw->flags =
             IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
             IEEE80211_HW_RX_INCLUDES_FCS |
-            IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING;
+            IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
+            IEEE80211_HW_SIGNAL_DBM;
+
         rt2x00dev->hw->extra_tx_headroom = TXD_DESC_SIZE;
-        rt2x00dev->hw->max_signal = MAX_SIGNAL;
-        rt2x00dev->hw->max_rssi = MAX_RX_SSI;
         rt2x00dev->hw->queues = 2;
 
         SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_usb(rt2x00dev)->dev);
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index 9929b15e28ba..f51a50b31e16 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -600,9 +600,9 @@ void rt2x00lib_rxdone(struct queue_entry *entry,
         rt2x00dev->link.qual.rx_success++;
 
         rx_status->rate_idx = idx;
-        rx_status->signal =
+        rx_status->qual =
             rt2x00lib_calculate_link_signal(rt2x00dev, rxdesc->rssi);
-        rx_status->ssi = rxdesc->rssi;
+        rx_status->signal = rxdesc->rssi;
         rx_status->flag = rxdesc->flags;
         rx_status->antenna = rt2x00dev->link.ant.active.rx;
 
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index 98af4d26583d..eaf23b908772 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -2245,10 +2245,9 @@ static void rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
          */
         rt2x00dev->hw->flags =
             IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
-            IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING;
+            IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
+            IEEE80211_HW_SIGNAL_DBM;
         rt2x00dev->hw->extra_tx_headroom = 0;
-        rt2x00dev->hw->max_signal = MAX_SIGNAL;
-        rt2x00dev->hw->max_rssi = MAX_RX_SSI;
         rt2x00dev->hw->queues = 4;
 
         SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_pci(rt2x00dev)->dev);
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index 351d95c4f50d..51c5575ed02f 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -1830,10 +1830,9 @@ static void rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
          */
         rt2x00dev->hw->flags =
             IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
-            IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING;
+            IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
+            IEEE80211_HW_SIGNAL_DBM;
         rt2x00dev->hw->extra_tx_headroom = TXD_DESC_SIZE;
-        rt2x00dev->hw->max_signal = MAX_SIGNAL;
-        rt2x00dev->hw->max_rssi = MAX_RX_SSI;
         rt2x00dev->hw->queues = 4;
 
         SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_usb(rt2x00dev)->dev);
diff --git a/drivers/net/wireless/rtl8180_dev.c b/drivers/net/wireless/rtl8180_dev.c
index c181f23e930d..c220998cee65 100644
--- a/drivers/net/wireless/rtl8180_dev.c
+++ b/drivers/net/wireless/rtl8180_dev.c
@@ -132,8 +132,8 @@ static void rtl8180_handle_rx(struct ieee80211_hw *dev)
 
                         rx_status.antenna = (flags2 >> 15) & 1;
                         /* TODO: improve signal/rssi reporting */
-                        rx_status.signal = flags2 & 0xFF;
-                        rx_status.ssi = (flags2 >> 8) & 0x7F;
+                        rx_status.qual = flags2 & 0xFF;
+                        rx_status.signal = (flags2 >> 8) & 0x7F;
                         /* XXX: is this correct? */
                         rx_status.rate_idx = (flags >> 20) & 0xF;
                         rx_status.freq = dev->conf.channel->center_freq;
@@ -894,9 +894,10 @@ static int __devinit rtl8180_probe(struct pci_dev *pdev,
         dev->wiphy->bands[IEEE80211_BAND_2GHZ] = &priv->band;
 
         dev->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
-                     IEEE80211_HW_RX_INCLUDES_FCS;
+                     IEEE80211_HW_RX_INCLUDES_FCS |
+                     IEEE80211_HW_SIGNAL_UNSPEC;
         dev->queues = 1;
-        dev->max_rssi = 65;
+        dev->max_signal = 65;
 
         reg = rtl818x_ioread32(priv, &priv->map->TX_CONF);
         reg &= RTL818X_TX_CONF_HWVER_MASK;
diff --git a/drivers/net/wireless/rtl8187_dev.c b/drivers/net/wireless/rtl8187_dev.c
index d5787b37e1fb..e14c84248686 100644
--- a/drivers/net/wireless/rtl8187_dev.c
+++ b/drivers/net/wireless/rtl8187_dev.c
@@ -261,8 +261,8 @@ static void rtl8187_rx_cb(struct urb *urb)
         }
 
         rx_status.antenna = (hdr->signal >> 7) & 1;
-        rx_status.signal = 64 - min(hdr->noise, (u8)64);
-        rx_status.ssi = signal;
+        rx_status.qual = 64 - min(hdr->noise, (u8)64);
+        rx_status.signal = signal;
         rx_status.rate_idx = rate;
         rx_status.freq = dev->conf.channel->center_freq;
         rx_status.band = dev->conf.channel->band;
@@ -740,11 +740,11 @@ static int __devinit rtl8187_probe(struct usb_interface *intf,
 
         priv->mode = IEEE80211_IF_TYPE_MNTR;
         dev->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
-                     IEEE80211_HW_RX_INCLUDES_FCS;
+                     IEEE80211_HW_RX_INCLUDES_FCS |
+                     IEEE80211_HW_SIGNAL_UNSPEC;
         dev->extra_tx_headroom = sizeof(struct rtl8187_tx_hdr);
         dev->queues = 1;
-        dev->max_rssi = 65;
-        dev->max_signal = 64;
+        dev->max_signal = 65;
 
         eeprom.data = dev;
         eeprom.register_read = rtl8187_eeprom_register_read;
diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c
index ee4331229f1f..0c736735e217 100644
--- a/drivers/net/wireless/zd1211rw/zd_mac.c
+++ b/drivers/net/wireless/zd1211rw/zd_mac.c
@@ -638,7 +638,7 @@ static int filter_ack(struct ieee80211_hw *hw, struct ieee80211_hdr *rx_hdr,
 
                         memset(&status, 0, sizeof(status));
                         status.flags = IEEE80211_TX_STATUS_ACK;
-                        status.ack_signal = stats->ssi;
+                        status.ack_signal = stats->signal;
                         __skb_unlink(skb, q);
                         tx_status(hw, skb, &status, 1);
                         goto out;
@@ -691,8 +691,8 @@ int zd_mac_rx(struct ieee80211_hw *hw, const u8 *buffer, unsigned int length)
 
         stats.freq = zd_channels[_zd_chip_get_channel(&mac->chip) - 1].center_freq;
         stats.band = IEEE80211_BAND_2GHZ;
-        stats.ssi = status->signal_strength;
-        stats.signal = zd_rx_qual_percent(buffer,
+        stats.signal = status->signal_strength;
+        stats.qual = zd_rx_qual_percent(buffer,
                                           length - sizeof(struct rx_status),
                                           status);
 
@@ -997,10 +997,10 @@ struct ieee80211_hw *zd_mac_alloc_hw(struct usb_interface *intf)
         hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &mac->band;
 
         hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
-                    IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE;
-        hw->max_rssi = 100;
-        hw->max_signal = 100;
+                    IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
+                    IEEE80211_HW_SIGNAL_DB;
 
+        hw->max_signal = 100;
         hw->queues = 1;
         hw->extra_tx_headroom = sizeof(struct zd_ctrlset);