aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net')
-rw-r--r--drivers/net/arm/Kconfig13
-rw-r--r--drivers/net/arm/Makefile1
-rw-r--r--drivers/net/arm/am79c961a.c12
-rw-r--r--drivers/net/arm/ether00.c1017
-rw-r--r--drivers/net/arm/ether3.c1
-rw-r--r--drivers/net/arm/etherh.c1
6 files changed, 6 insertions, 1039 deletions
diff --git a/drivers/net/arm/Kconfig b/drivers/net/arm/Kconfig
index 470364deded0..625184b65e38 100644
--- a/drivers/net/arm/Kconfig
+++ b/drivers/net/arm/Kconfig
@@ -31,16 +31,3 @@ config ARM_ETHERH
31 help 31 help
32 If you have an Acorn system with one of these network cards, you 32 If you have an Acorn system with one of these network cards, you
33 should say Y to this option if you wish to use it with Linux. 33 should say Y to this option if you wish to use it with Linux.
34
35config ARM_ETHER00
36 tristate "Altera Ether00 support"
37 depends on NET_ETHERNET && ARM && ARCH_CAMELOT
38 help
39 This is the driver for Altera's ether00 ethernet mac IP core. Say
40 Y here if you want to build support for this into the kernel. It
41 is also available as a module (say M here) that can be inserted/
42 removed from the kernel at the same time as the PLD is configured.
43 If this driver is running on an epxa10 development board then it
44 will generate a suitable hw address based on the board serial
45 number (MTD support is required for this). Otherwise you will
46 need to set a suitable hw address using ifconfig.
diff --git a/drivers/net/arm/Makefile b/drivers/net/arm/Makefile
index b0d706834d89..bc263edf06a7 100644
--- a/drivers/net/arm/Makefile
+++ b/drivers/net/arm/Makefile
@@ -4,7 +4,6 @@
4# 4#
5 5
6obj-$(CONFIG_ARM_AM79C961A) += am79c961a.o 6obj-$(CONFIG_ARM_AM79C961A) += am79c961a.o
7obj-$(CONFIG_ARM_ETHER00) += ether00.o
8obj-$(CONFIG_ARM_ETHERH) += etherh.o 7obj-$(CONFIG_ARM_ETHERH) += etherh.o
9obj-$(CONFIG_ARM_ETHER3) += ether3.o 8obj-$(CONFIG_ARM_ETHER3) += ether3.o
10obj-$(CONFIG_ARM_ETHER1) += ether1.o 9obj-$(CONFIG_ARM_ETHER1) += ether1.o
diff --git a/drivers/net/arm/am79c961a.c b/drivers/net/arm/am79c961a.c
index 877891a29aaa..53e3afc1b7b7 100644
--- a/drivers/net/arm/am79c961a.c
+++ b/drivers/net/arm/am79c961a.c
@@ -668,9 +668,8 @@ static void __init am79c961_banner(void)
668 printk(KERN_INFO "%s", version); 668 printk(KERN_INFO "%s", version);
669} 669}
670 670
671static int __init am79c961_probe(struct device *_dev) 671static int __init am79c961_probe(struct platform_device *pdev)
672{ 672{
673 struct platform_device *pdev = to_platform_device(_dev);
674 struct resource *res; 673 struct resource *res;
675 struct net_device *dev; 674 struct net_device *dev;
676 struct dev_priv *priv; 675 struct dev_priv *priv;
@@ -758,15 +757,16 @@ out:
758 return ret; 757 return ret;
759} 758}
760 759
761static struct device_driver am79c961_driver = { 760static struct platform_driver am79c961_driver = {
762 .name = "am79c961",
763 .bus = &platform_bus_type,
764 .probe = am79c961_probe, 761 .probe = am79c961_probe,
762 .driver = {
763 .name = "am79c961",
764 },
765}; 765};
766 766
767static int __init am79c961_init(void) 767static int __init am79c961_init(void)
768{ 768{
769 return driver_register(&am79c961_driver); 769 return platform_driver_register(&am79c961_driver);
770} 770}
771 771
772__initcall(am79c961_init); 772__initcall(am79c961_init);
diff --git a/drivers/net/arm/ether00.c b/drivers/net/arm/ether00.c
deleted file mode 100644
index 4f1f4e31bda5..000000000000
--- a/drivers/net/arm/ether00.c
+++ /dev/null
@@ -1,1017 +0,0 @@
1/*
2 * drivers/net/ether00.c
3 *
4 * Copyright (C) 2001 Altera Corporation
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
10 *
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
15 *
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software
18 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
19 */
20
21/* includes */
22#include <linux/config.h>
23#include <linux/pci.h>
24#include <linux/sched.h>
25#include <linux/netdevice.h>
26#include <linux/skbuff.h>
27#include <linux/etherdevice.h>
28#include <linux/module.h>
29#include <linux/tqueue.h>
30#include <linux/mtd/mtd.h>
31#include <linux/pld/pld_hotswap.h>
32#include <asm/arch/excalibur.h>
33#include <asm/arch/hardware.h>
34#include <asm/irq.h>
35#include <asm/io.h>
36#include <asm/sizes.h>
37
38#include <asm/arch/ether00.h>
39#include <asm/arch/tdkphy.h>
40
41
42MODULE_AUTHOR("Clive Davies");
43MODULE_DESCRIPTION("Altera Ether00 IP core driver");
44MODULE_LICENSE("GPL");
45
46#define PKT_BUF_SZ 1540 /* Size of each rx buffer */
47#define ETH_NR 4 /* Number of MACs this driver supports */
48
49#define DEBUG(x)
50
51#define __dma_va(x) (unsigned int)((unsigned int)priv->dma_data+(((unsigned int)(x))&(EXC_SPSRAM_BLOCK0_SIZE-1)))
52#define __dma_pa(x) (unsigned int)(EXC_SPSRAM_BLOCK0_BASE+(((unsigned int)(x))-(unsigned int)priv->dma_data))
53
54#define ETHER00_BASE 0
55#define ETHER00_TYPE
56#define ETHER00_NAME "ether00"
57#define MAC_REG_SIZE 0x400 /* size of MAC register area */
58
59
60
61/* typedefs */
62
63/* The definition of the driver control structure */
64
65#define RX_NUM_BUFF 10
66#define RX_NUM_FDESC 10
67#define TX_NUM_FDESC 10
68
69struct tx_fda_ent{
70 FDA_DESC fd;
71 BUF_DESC bd;
72 BUF_DESC pad;
73};
74struct rx_fda_ent{
75 FDA_DESC fd;
76 BUF_DESC bd;
77 BUF_DESC pad;
78};
79struct rx_blist_ent{
80 FDA_DESC fd;
81 BUF_DESC bd;
82 BUF_DESC pad;
83};
84struct net_priv
85{
86 struct net_device_stats stats;
87 struct sk_buff* skb;
88 void* dma_data;
89 struct rx_blist_ent* rx_blist_vp;
90 struct rx_fda_ent* rx_fda_ptr;
91 struct tx_fda_ent* tx_fdalist_vp;
92 struct tq_struct tq_memupdate;
93 unsigned char memupdate_scheduled;
94 unsigned char rx_disabled;
95 unsigned char queue_stopped;
96 spinlock_t rx_lock;
97};
98
99static const char vendor_id[2]={0x07,0xed};
100
101#ifdef ETHER00_DEBUG
102
103/* Dump (most) registers for debugging puposes */
104
105static void dump_regs(struct net_device *dev){
106 struct net_priv* priv=dev->priv;
107 unsigned int* i;
108
109 printk("\n RX free descriptor area:\n");
110
111 for(i=(unsigned int*)priv->rx_fda_ptr;
112 i<((unsigned int*)(priv->rx_fda_ptr+RX_NUM_FDESC));){
113 printk("%#8x %#8x %#8x %#8x\n",*i,*(i+1),*(i+2),*(i+3));
114 i+=4;
115 }
116
117 printk("\n RX buffer list:\n");
118
119 for(i=(unsigned int*)priv->rx_blist_vp;
120 i<((unsigned int*)(priv->rx_blist_vp+RX_NUM_BUFF));){
121 printk("%#8x %#8x %#8x %#8x\n",*i,*(i+1),*(i+2),*(i+3));
122 i+=4;
123 }
124
125 printk("\n TX frame descriptor list:\n");
126
127 for(i=(unsigned int*)priv->tx_fdalist_vp;
128 i<((unsigned int*)(priv->tx_fdalist_vp+TX_NUM_FDESC));){
129 printk("%#8x %#8x %#8x %#8x\n",*i,*(i+1),*(i+2),*(i+3));
130 i+=4;
131 }
132
133 printk("\ndma ctl=%#x\n",readw(ETHER_DMA_CTL(dev->base_addr)));
134 printk("txfrmptr=%#x\n",readw(ETHER_TXFRMPTR(dev->base_addr)));
135 printk("txthrsh=%#x\n",readw(ETHER_TXTHRSH(dev->base_addr)));
136 printk("txpollctr=%#x\n",readw(ETHER_TXPOLLCTR(dev->base_addr)));
137 printk("blfrmptr=%#x\n",readw(ETHER_BLFRMPTR(dev->base_addr)));
138 printk("rxfragsize=%#x\n",readw(ETHER_RXFRAGSIZE(dev->base_addr)));
139 printk("tx_int_en=%#x\n",readw(ETHER_INT_EN(dev->base_addr)));
140 printk("fda_bas=%#x\n",readw(ETHER_FDA_BAS(dev->base_addr)));
141 printk("fda_lim=%#x\n",readw(ETHER_FDA_LIM(dev->base_addr)));
142 printk("int_src=%#x\n",readw(ETHER_INT_SRC(dev->base_addr)));
143 printk("pausecnt=%#x\n",readw(ETHER_PAUSECNT(dev->base_addr)));
144 printk("rempaucnt=%#x\n",readw(ETHER_REMPAUCNT(dev->base_addr)));
145 printk("txconfrmstat=%#x\n",readw(ETHER_TXCONFRMSTAT(dev->base_addr)));
146 printk("mac_ctl=%#x\n",readw(ETHER_MAC_CTL(dev->base_addr)));
147 printk("arc_ctl=%#x\n",readw(ETHER_ARC_CTL(dev->base_addr)));
148 printk("tx_ctl=%#x\n",readw(ETHER_TX_CTL(dev->base_addr)));
149}
150#endif /* ETHER00_DEBUG */
151
152
153static int ether00_write_phy(struct net_device *dev, short address, short value)
154{
155 volatile int count = 1024;
156 writew(value,ETHER_MD_DATA(dev->base_addr));
157 writew( ETHER_MD_CA_BUSY_MSK |
158 ETHER_MD_CA_WR_MSK |
159 (address & ETHER_MD_CA_ADDR_MSK),
160 ETHER_MD_CA(dev->base_addr));
161
162 /* Wait for the command to complete */
163 while((readw(ETHER_MD_CA(dev->base_addr)) & ETHER_MD_CA_BUSY_MSK)&&count){
164 count--;
165 }
166 if (!count){
167 printk("Write to phy failed, addr=%#x, data=%#x\n",address, value);
168 return -EIO;
169 }
170 return 0;
171}
172
173static int ether00_read_phy(struct net_device *dev, short address)
174{
175 volatile int count = 1024;
176 writew( ETHER_MD_CA_BUSY_MSK |
177 (address & ETHER_MD_CA_ADDR_MSK),
178 ETHER_MD_CA(dev->base_addr));
179
180 /* Wait for the command to complete */
181 while((readw(ETHER_MD_CA(dev->base_addr)) & ETHER_MD_CA_BUSY_MSK)&&count){
182 count--;
183 }
184 if (!count){
185 printk(KERN_WARNING "Read from phy timed out\n");
186 return -EIO;
187 }
188 return readw(ETHER_MD_DATA(dev->base_addr));
189}
190
191static void ether00_phy_int(int irq_num, void* dev_id, struct pt_regs* regs)
192{
193 struct net_device* dev=dev_id;
194 int irq_status;
195
196 irq_status=ether00_read_phy(dev, PHY_IRQ_CONTROL);
197
198 if(irq_status & PHY_IRQ_CONTROL_ANEG_COMP_INT_MSK){
199 /*
200 * Autonegotiation complete on epxa10db. The mac doesn't
201 * twig if we're in full duplex so we need to check the
202 * phy status register and configure the mac accordingly
203 */
204 if(ether00_read_phy(dev, PHY_STATUS)&(PHY_STATUS_10T_F_MSK|PHY_STATUS_100_X_F_MSK)){
205 int tmp;
206 tmp=readl(ETHER_MAC_CTL(dev->base_addr));
207 writel(tmp|ETHER_MAC_CTL_FULLDUP_MSK,ETHER_MAC_CTL(dev->base_addr));
208 }
209 }
210
211 if(irq_status&PHY_IRQ_CONTROL_LS_CHG_INT_MSK){
212
213 if(ether00_read_phy(dev, PHY_STATUS)& PHY_STATUS_LINK_MSK){
214 /* Link is up */
215 netif_carrier_on(dev);
216 //printk("Carrier on\n");
217 }else{
218 netif_carrier_off(dev);
219 //printk("Carrier off\n");
220
221 }
222 }
223
224}
225
226static void setup_blist_entry(struct sk_buff* skb,struct rx_blist_ent* blist_ent_ptr){
227 /* Make the buffer consistent with the cache as the mac is going to write
228 * directly into it*/
229 blist_ent_ptr->fd.FDSystem=(unsigned int)skb;
230 blist_ent_ptr->bd.BuffData=(char*)__pa(skb->data);
231 consistent_sync(skb->data,PKT_BUF_SZ,PCI_DMA_FROMDEVICE);
232 /* align IP on 16 Byte (DMA_CTL set to skip 2 bytes) */
233 skb_reserve(skb,2);
234 blist_ent_ptr->bd.BuffLength=PKT_BUF_SZ-2;
235 blist_ent_ptr->fd.FDLength=1;
236 blist_ent_ptr->fd.FDCtl=FDCTL_COWNSFD_MSK;
237 blist_ent_ptr->bd.BDCtl=BDCTL_COWNSBD_MSK;
238}
239
240
241static int ether00_mem_init(struct net_device* dev)
242{
243 struct net_priv* priv=dev->priv;
244 struct tx_fda_ent *tx_fd_ptr,*tx_end_ptr;
245 struct rx_blist_ent* blist_ent_ptr;
246 int i;
247
248 /*
249 * Grab a block of on chip SRAM to contain the control stuctures for
250 * the ethernet MAC. This uncached becuase it needs to be accesses by both
251 * bus masters (cpu + mac). However, it shouldn't matter too much in terms
252 * of speed as its on chip memory
253 */
254 priv->dma_data=ioremap_nocache(EXC_SPSRAM_BLOCK0_BASE,EXC_SPSRAM_BLOCK0_SIZE );
255 if (!priv->dma_data)
256 return -ENOMEM;
257
258 priv->rx_fda_ptr=(struct rx_fda_ent*)priv->dma_data;
259 /*
260 * Now share it out amongst the Frame descriptors and the buffer list
261 */
262 priv->rx_blist_vp=(struct rx_blist_ent*)((unsigned int)priv->dma_data+RX_NUM_FDESC*sizeof(struct rx_fda_ent));
263
264 /*
265 *Initalise the FDA list
266 */
267 /* set ownership to the controller */
268 memset(priv->rx_fda_ptr,0x80,RX_NUM_FDESC*sizeof(struct rx_fda_ent));
269
270 /*
271 *Initialise the buffer list
272 */
273 blist_ent_ptr=priv->rx_blist_vp;
274 i=0;
275 while(blist_ent_ptr<(priv->rx_blist_vp+RX_NUM_BUFF)){
276 struct sk_buff *skb;
277 blist_ent_ptr->fd.FDLength=1;
278 skb=dev_alloc_skb(PKT_BUF_SZ);
279 if(skb){
280 setup_blist_entry(skb,blist_ent_ptr);
281 blist_ent_ptr->fd.FDNext=(FDA_DESC*)__dma_pa(blist_ent_ptr+1);
282 blist_ent_ptr->bd.BDStat=i++;
283 blist_ent_ptr++;
284 }
285 else
286 {
287 printk("Failed to initalise buffer list\n");
288 }
289
290 }
291 blist_ent_ptr--;
292 blist_ent_ptr->fd.FDNext=(FDA_DESC*)__dma_pa(priv->rx_blist_vp);
293
294 priv->tx_fdalist_vp=(struct tx_fda_ent*)(priv->rx_blist_vp+RX_NUM_BUFF);
295
296 /* Initialise the buffers to be a circular list. The mac will then go poll
297 * the list until it finds a frame ready to transmit */
298 tx_end_ptr=priv->tx_fdalist_vp+TX_NUM_FDESC;
299 for(tx_fd_ptr=priv->tx_fdalist_vp;tx_fd_ptr<tx_end_ptr;tx_fd_ptr++){
300 tx_fd_ptr->fd.FDNext=(FDA_DESC*)__dma_pa((tx_fd_ptr+1));
301 tx_fd_ptr->fd.FDCtl=1;
302 tx_fd_ptr->fd.FDStat=0;
303 tx_fd_ptr->fd.FDLength=1;
304
305 }
306 /* Change the last FDNext pointer to make a circular list */
307 tx_fd_ptr--;
308 tx_fd_ptr->fd.FDNext=(FDA_DESC*)__dma_pa(priv->tx_fdalist_vp);
309
310 /* Point the device at the chain of Rx and Tx Buffers */
311 writel((unsigned int)__dma_pa(priv->rx_fda_ptr),ETHER_FDA_BAS(dev->base_addr));
312 writel((RX_NUM_FDESC-1)*sizeof(struct rx_fda_ent),ETHER_FDA_LIM(dev->base_addr));
313 writel((unsigned int)__dma_pa(priv->rx_blist_vp),ETHER_BLFRMPTR(dev->base_addr));
314
315 writel((unsigned int)__dma_pa(priv->tx_fdalist_vp),ETHER_TXFRMPTR(dev->base_addr));
316
317 return 0;
318}
319
320
321void ether00_mem_update(void* dev_id)
322{
323 struct net_device* dev=dev_id;
324 struct net_priv* priv=dev->priv;
325 struct sk_buff* skb;
326 struct tx_fda_ent *fda_ptr=priv->tx_fdalist_vp;
327 struct rx_blist_ent* blist_ent_ptr;
328 unsigned long flags;
329
330 priv->tq_memupdate.sync=0;
331 //priv->tq_memupdate.list=
332 priv->memupdate_scheduled=0;
333
334 /* Transmit interrupt */
335 while(fda_ptr<(priv->tx_fdalist_vp+TX_NUM_FDESC)){
336 if(!(FDCTL_COWNSFD_MSK&fda_ptr->fd.FDCtl) && (ETHER_TX_STAT_COMP_MSK&fda_ptr->fd.FDStat)){
337 priv->stats.tx_packets++;
338 priv->stats.tx_bytes+=fda_ptr->bd.BuffLength;
339 skb=(struct sk_buff*)fda_ptr->fd.FDSystem;
340 //printk("%d:txcln:fda=%#x skb=%#x\n",jiffies,fda_ptr,skb);
341 dev_kfree_skb(skb);
342 fda_ptr->fd.FDSystem=0;
343 fda_ptr->fd.FDStat=0;
344 fda_ptr->fd.FDCtl=0;
345 }
346 fda_ptr++;
347 }
348 /* Fill in any missing buffers from the received queue */
349 spin_lock_irqsave(&priv->rx_lock,flags);
350 blist_ent_ptr=priv->rx_blist_vp;
351 while(blist_ent_ptr<(priv->rx_blist_vp+RX_NUM_BUFF)){
352 /* fd.FDSystem of 0 indicates we failed to allocate the buffer in the ISR */
353 if(!blist_ent_ptr->fd.FDSystem){
354 struct sk_buff *skb;
355 skb=dev_alloc_skb(PKT_BUF_SZ);
356 blist_ent_ptr->fd.FDSystem=(unsigned int)skb;
357 if(skb){
358 setup_blist_entry(skb,blist_ent_ptr);
359 }
360 else
361 {
362 break;
363 }
364 }
365 blist_ent_ptr++;
366 }
367 spin_unlock_irqrestore(&priv->rx_lock,flags);
368 if(priv->queue_stopped){
369 //printk("%d:cln:start q\n",jiffies);
370 netif_start_queue(dev);
371 }
372 if(priv->rx_disabled){
373 //printk("%d:enable_irq\n",jiffies);
374 priv->rx_disabled=0;
375 writel(ETHER_RX_CTL_RXEN_MSK,ETHER_RX_CTL(dev->base_addr));
376
377 }
378}
379
380
381static void ether00_int( int irq_num, void* dev_id, struct pt_regs* regs)
382{
383 struct net_device* dev=dev_id;
384 struct net_priv* priv=dev->priv;
385
386 unsigned int interruptValue;
387
388 interruptValue=readl(ETHER_INT_SRC(dev->base_addr));
389
390 //printk("INT_SRC=%x\n",interruptValue);
391
392 if(!(readl(ETHER_INT_SRC(dev->base_addr)) & ETHER_INT_SRC_IRQ_MSK))
393 {
394 return; /* Interrupt wasn't caused by us!! */
395 }
396
397 if(readl(ETHER_INT_SRC(dev->base_addr))&
398 (ETHER_INT_SRC_INTMACRX_MSK |
399 ETHER_INT_SRC_FDAEX_MSK |
400 ETHER_INT_SRC_BLEX_MSK)) {
401 struct rx_blist_ent* blist_ent_ptr;
402 struct rx_fda_ent* fda_ent_ptr;
403 struct sk_buff* skb;
404
405 fda_ent_ptr=priv->rx_fda_ptr;
406 spin_lock(&priv->rx_lock);
407 while(fda_ent_ptr<(priv->rx_fda_ptr+RX_NUM_FDESC)){
408 int result;
409
410 if(!(fda_ent_ptr->fd.FDCtl&FDCTL_COWNSFD_MSK))
411 {
412 /* This frame is ready for processing */
413 /*find the corresponding buffer in the bufferlist */
414 blist_ent_ptr=priv->rx_blist_vp+fda_ent_ptr->bd.BDStat;
415 skb=(struct sk_buff*)blist_ent_ptr->fd.FDSystem;
416
417 /* Pass this skb up the stack */
418 skb->dev=dev;
419 skb_put(skb,fda_ent_ptr->fd.FDLength);
420 skb->protocol=eth_type_trans(skb,dev);
421 skb->ip_summed=CHECKSUM_UNNECESSARY;
422 result=netif_rx(skb);
423 /* Update statistics */
424 priv->stats.rx_packets++;
425 priv->stats.rx_bytes+=fda_ent_ptr->fd.FDLength;
426
427 /* Free the FDA entry */
428 fda_ent_ptr->bd.BDStat=0xff;
429 fda_ent_ptr->fd.FDCtl=FDCTL_COWNSFD_MSK;
430
431 /* Allocate a new skb and point the bd entry to it */
432 blist_ent_ptr->fd.FDSystem=0;
433 skb=dev_alloc_skb(PKT_BUF_SZ);
434 //printk("allocskb=%#x\n",skb);
435 if(skb){
436 setup_blist_entry(skb,blist_ent_ptr);
437
438 }
439 else if(!priv->memupdate_scheduled){
440 int tmp;
441 /* There are no buffers at the moment, so schedule */
442 /* the background task to sort this out */
443 schedule_task(&priv->tq_memupdate);
444 priv->memupdate_scheduled=1;
445 printk(KERN_DEBUG "%s:No buffers",dev->name);
446 /* If this interrupt was due to a lack of buffers then
447 * we'd better stop the receiver too */
448 if(interruptValue&ETHER_INT_SRC_BLEX_MSK){
449 priv->rx_disabled=1;
450 tmp=readl(ETHER_INT_SRC(dev->base_addr));
451 writel(tmp&~ETHER_RX_CTL_RXEN_MSK,ETHER_RX_CTL(dev->base_addr));
452 printk(KERN_DEBUG "%s:Halting rx",dev->name);
453 }
454
455 }
456
457 }
458 fda_ent_ptr++;
459 }
460 spin_unlock(&priv->rx_lock);
461
462 /* Clear the interrupts */
463 writel(ETHER_INT_SRC_INTMACRX_MSK | ETHER_INT_SRC_FDAEX_MSK
464 | ETHER_INT_SRC_BLEX_MSK,ETHER_INT_SRC(dev->base_addr));
465
466 }
467
468 if(readl(ETHER_INT_SRC(dev->base_addr))&ETHER_INT_SRC_INTMACTX_MSK){
469
470 if(!priv->memupdate_scheduled){
471 schedule_task(&priv->tq_memupdate);
472 priv->memupdate_scheduled=1;
473 }
474 /* Clear the interrupt */
475 writel(ETHER_INT_SRC_INTMACTX_MSK,ETHER_INT_SRC(dev->base_addr));
476 }
477
478 if (readl(ETHER_INT_SRC(dev->base_addr)) & (ETHER_INT_SRC_SWINT_MSK|
479 ETHER_INT_SRC_INTEARNOT_MSK|
480 ETHER_INT_SRC_INTLINK_MSK|
481 ETHER_INT_SRC_INTEXBD_MSK|
482 ETHER_INT_SRC_INTTXCTLCMP_MSK))
483 {
484 /*
485 * Not using any of these so they shouldn't happen
486 *
487 * In the cased of INTEXBD - if you allocate more
488 * than 28 decsriptors you may need to think about this
489 */
490 printk("Not using this interrupt\n");
491 }
492
493 if (readl(ETHER_INT_SRC(dev->base_addr)) &
494 (ETHER_INT_SRC_INTSBUS_MSK |
495 ETHER_INT_SRC_INTNRABT_MSK
496 |ETHER_INT_SRC_DMPARERR_MSK))
497 {
498 /*
499 * Hardware errors, we can either ignore them and hope they go away
500 *or reset the device, I'll try the first for now to see if they happen
501 */
502 printk("Hardware error\n");
503 }
504}
505
506static void ether00_setup_ethernet_address(struct net_device* dev)
507{
508 int tmp;
509
510 dev->addr_len=6;
511 writew(0,ETHER_ARC_ADR(dev->base_addr));
512 writel((dev->dev_addr[0]<<24) |
513 (dev->dev_addr[1]<<16) |
514 (dev->dev_addr[2]<<8) |
515 dev->dev_addr[3],
516 ETHER_ARC_DATA(dev->base_addr));
517
518 writew(4,ETHER_ARC_ADR(dev->base_addr));
519 tmp=readl(ETHER_ARC_DATA(dev->base_addr));
520 tmp&=0xffff;
521 tmp|=(dev->dev_addr[4]<<24) | (dev->dev_addr[5]<<16);
522 writel(tmp, ETHER_ARC_DATA(dev->base_addr));
523 /* Enable this entry in the ARC */
524
525 writel(1,ETHER_ARC_ENA(dev->base_addr));
526
527 return;
528}
529
530
531static void ether00_reset(struct net_device *dev)
532{
533 /* reset the controller */
534 writew(ETHER_MAC_CTL_RESET_MSK,ETHER_MAC_CTL(dev->base_addr));
535
536 /*
537 * Make sure we're not going to send anything
538 */
539
540 writew(ETHER_TX_CTL_TXHALT_MSK,ETHER_TX_CTL(dev->base_addr));
541
542 /*
543 * Make sure we're not going to receive anything
544 */
545 writew(ETHER_RX_CTL_RXHALT_MSK,ETHER_RX_CTL(dev->base_addr));
546
547 /*
548 * Disable Interrupts for now, and set the burst size to 8 bytes
549 */
550
551 writel(ETHER_DMA_CTL_INTMASK_MSK |
552 ((8 << ETHER_DMA_CTL_DMBURST_OFST) & ETHER_DMA_CTL_DMBURST_MSK)
553 |(2<<ETHER_DMA_CTL_RXALIGN_OFST),
554 ETHER_DMA_CTL(dev->base_addr));
555
556
557 /*
558 * Set TxThrsh - start transmitting a packet after 1514
559 * bytes or when a packet is complete, whichever comes first
560 */
561 writew(1514,ETHER_TXTHRSH(dev->base_addr));
562
563 /*
564 * Set TxPollCtr. Each cycle is
565 * 61.44 microseconds with a 33 MHz bus
566 */
567 writew(1,ETHER_TXPOLLCTR(dev->base_addr));
568
569 /*
570 * Set Rx_Ctl - Turn off reception and let RxData turn it
571 * on later
572 */
573 writew(ETHER_RX_CTL_RXHALT_MSK,ETHER_RX_CTL(dev->base_addr));
574
575}
576
577
578static void ether00_set_multicast(struct net_device* dev)
579{
580 int count=dev->mc_count;
581
582 /* Set promiscuous mode if it's asked for. */
583
584 if (dev->flags&IFF_PROMISC){
585
586 writew( ETHER_ARC_CTL_COMPEN_MSK |
587 ETHER_ARC_CTL_BROADACC_MSK |
588 ETHER_ARC_CTL_GROUPACC_MSK |
589 ETHER_ARC_CTL_STATIONACC_MSK,
590 ETHER_ARC_CTL(dev->base_addr));
591 return;
592 }
593
594 /*
595 * Get all multicast packets if required, or if there are too
596 * many addresses to fit in hardware
597 */
598 if (dev->flags & IFF_ALLMULTI){
599 writew( ETHER_ARC_CTL_COMPEN_MSK |
600 ETHER_ARC_CTL_GROUPACC_MSK |
601 ETHER_ARC_CTL_BROADACC_MSK,
602 ETHER_ARC_CTL(dev->base_addr));
603 return;
604 }
605 if (dev->mc_count > (ETHER_ARC_SIZE - 1)){
606
607 printk(KERN_WARNING "Too many multicast addresses for hardware to filter - receiving all multicast packets\n");
608 writew( ETHER_ARC_CTL_COMPEN_MSK |
609 ETHER_ARC_CTL_GROUPACC_MSK |
610 ETHER_ARC_CTL_BROADACC_MSK,
611 ETHER_ARC_CTL(dev->base_addr));
612 return;
613 }
614
615 if(dev->mc_count){
616 struct dev_mc_list *mc_list_ent=dev->mc_list;
617 unsigned int temp,i;
618 DEBUG(printk("mc_count=%d mc_list=%#x\n",dev-> mc_count, dev->mc_list));
619 DEBUG(printk("mc addr=%02#x%02x%02x%02x%02x%02x\n",
620 mc_list_ent->dmi_addr[5],
621 mc_list_ent->dmi_addr[4],
622 mc_list_ent->dmi_addr[3],
623 mc_list_ent->dmi_addr[2],
624 mc_list_ent->dmi_addr[1],
625 mc_list_ent->dmi_addr[0]);)
626
627 /*
628 * The first 6 bytes are the MAC address, so
629 * don't change them!
630 */
631 writew(4,ETHER_ARC_ADR(dev->base_addr));
632 temp=readl(ETHER_ARC_DATA(dev->base_addr));
633 temp&=0xffff0000;
634
635 /* Disable the current multicast stuff */
636 writel(1,ETHER_ARC_ENA(dev->base_addr));
637
638 for(;;){
639 temp|=mc_list_ent->dmi_addr[1] |
640 mc_list_ent->dmi_addr[0]<<8;
641 writel(temp,ETHER_ARC_DATA(dev->base_addr));
642
643 i=readl(ETHER_ARC_ADR(dev->base_addr));
644 writew(i+4,ETHER_ARC_ADR(dev->base_addr));
645
646 temp=mc_list_ent->dmi_addr[5]|
647 mc_list_ent->dmi_addr[4]<<8 |
648 mc_list_ent->dmi_addr[3]<<16 |
649 mc_list_ent->dmi_addr[2]<<24;
650 writel(temp,ETHER_ARC_DATA(dev->base_addr));
651
652 count--;
653 if(!mc_list_ent->next || !count){
654 break;
655 }
656 DEBUG(printk("mc_list_next=%#x\n",mc_list_ent->next);)
657 mc_list_ent=mc_list_ent->next;
658
659
660 i=readl(ETHER_ARC_ADR(dev->base_addr));
661 writel(i+4,ETHER_ARC_ADR(dev->base_addr));
662
663 temp=mc_list_ent->dmi_addr[3]|
664 mc_list_ent->dmi_addr[2]<<8 |
665 mc_list_ent->dmi_addr[1]<<16 |
666 mc_list_ent->dmi_addr[0]<<24;
667 writel(temp,ETHER_ARC_DATA(dev->base_addr));
668
669 i=readl(ETHER_ARC_ADR(dev->base_addr));
670 writel(i+4,ETHER_ARC_ADR(dev->base_addr));
671
672 temp=mc_list_ent->dmi_addr[4]<<16 |
673 mc_list_ent->dmi_addr[5]<<24;
674
675 writel(temp,ETHER_ARC_DATA(dev->base_addr));
676
677 count--;
678 if(!mc_list_ent->next || !count){
679 break;
680 }
681 mc_list_ent=mc_list_ent->next;
682 }
683
684
685 if(count)
686 printk(KERN_WARNING "Multicast list size error\n");
687
688
689 writew( ETHER_ARC_CTL_BROADACC_MSK|
690 ETHER_ARC_CTL_COMPEN_MSK,
691 ETHER_ARC_CTL(dev->base_addr));
692
693 }
694
695 /* enable the active ARC enties */
696 writew((1<<(count+2))-1,ETHER_ARC_ENA(dev->base_addr));
697}
698
699
700static int ether00_open(struct net_device* dev)
701{
702 int result,tmp;
703 struct net_priv* priv;
704
705 if (!is_valid_ether_addr(dev->dev_addr))
706 return -EINVAL;
707
708 /* Install interrupt handlers */
709 result=request_irq(dev->irq,ether00_int,0,"ether00",dev);
710 if(result)
711 goto open_err1;
712
713 result=request_irq(2,ether00_phy_int,0,"ether00_phy",dev);
714 if(result)
715 goto open_err2;
716
717 ether00_reset(dev);
718 result=ether00_mem_init(dev);
719 if(result)
720 goto open_err3;
721
722
723 ether00_setup_ethernet_address(dev);
724
725 ether00_set_multicast(dev);
726
727 result=ether00_write_phy(dev,PHY_CONTROL, PHY_CONTROL_ANEGEN_MSK | PHY_CONTROL_RANEG_MSK);
728 if(result)
729 goto open_err4;
730 result=ether00_write_phy(dev,PHY_IRQ_CONTROL, PHY_IRQ_CONTROL_LS_CHG_IE_MSK |
731 PHY_IRQ_CONTROL_ANEG_COMP_IE_MSK);
732 if(result)
733 goto open_err4;
734
735 /* Start the device enable interrupts */
736 writew(ETHER_RX_CTL_RXEN_MSK
737// | ETHER_RX_CTL_STRIPCRC_MSK
738 | ETHER_RX_CTL_ENGOOD_MSK
739 | ETHER_RX_CTL_ENRXPAR_MSK| ETHER_RX_CTL_ENLONGERR_MSK
740 | ETHER_RX_CTL_ENOVER_MSK| ETHER_RX_CTL_ENCRCERR_MSK,
741 ETHER_RX_CTL(dev->base_addr));
742
743 writew(ETHER_TX_CTL_TXEN_MSK|
744 ETHER_TX_CTL_ENEXDEFER_MSK|
745 ETHER_TX_CTL_ENLCARR_MSK|
746 ETHER_TX_CTL_ENEXCOLL_MSK|
747 ETHER_TX_CTL_ENLATECOLL_MSK|
748 ETHER_TX_CTL_ENTXPAR_MSK|
749 ETHER_TX_CTL_ENCOMP_MSK,
750 ETHER_TX_CTL(dev->base_addr));
751
752 tmp=readl(ETHER_DMA_CTL(dev->base_addr));
753 writel(tmp&~ETHER_DMA_CTL_INTMASK_MSK,ETHER_DMA_CTL(dev->base_addr));
754
755 return 0;
756
757 open_err4:
758 ether00_reset(dev);
759 open_err3:
760 free_irq(2,dev);
761 open_err2:
762 free_irq(dev->irq,dev);
763 open_err1:
764 return result;
765
766}
767
768
769static int ether00_tx(struct sk_buff* skb, struct net_device* dev)
770{
771 struct net_priv *priv=dev->priv;
772 struct tx_fda_ent *fda_ptr;
773 int i;
774
775
776 /*
777 * Find an empty slot in which to stick the frame
778 */
779 fda_ptr=(struct tx_fda_ent*)__dma_va(readl(ETHER_TXFRMPTR(dev->base_addr)));
780 i=0;
781 while(i<TX_NUM_FDESC){
782 if (fda_ptr->fd.FDStat||(fda_ptr->fd.FDCtl & FDCTL_COWNSFD_MSK)){
783 fda_ptr =(struct tx_fda_ent*) __dma_va((struct tx_fda_ent*)fda_ptr->fd.FDNext);
784 }
785 else {
786 break;
787 }
788 i++;
789 }
790
791 /* Write the skb data from the cache*/
792 consistent_sync(skb->data,skb->len,PCI_DMA_TODEVICE);
793 fda_ptr->bd.BuffData=(char*)__pa(skb->data);
794 fda_ptr->bd.BuffLength=(unsigned short)skb->len;
795 /* Save the pointer to the skb for freeing later */
796 fda_ptr->fd.FDSystem=(unsigned int)skb;
797 fda_ptr->fd.FDStat=0;
798 /* Pass ownership of the buffers to the controller */
799 fda_ptr->fd.FDCtl=1;
800 fda_ptr->fd.FDCtl|=FDCTL_COWNSFD_MSK;
801
802 /* If the next buffer in the list is full, stop the queue */
803 fda_ptr=(struct tx_fda_ent*)__dma_va(fda_ptr->fd.FDNext);
804 if ((fda_ptr->fd.FDStat)||(fda_ptr->fd.FDCtl & FDCTL_COWNSFD_MSK)){
805 netif_stop_queue(dev);
806 priv->queue_stopped=1;
807 }
808
809 return 0;
810}
811
812static struct net_device_stats *ether00_stats(struct net_device* dev)
813{
814 struct net_priv *priv=dev->priv;
815 return &priv->stats;
816}
817
818
819static int ether00_stop(struct net_device* dev)
820{
821 struct net_priv *priv=dev->priv;
822 int tmp;
823
824 /* Stop/disable the device. */
825 tmp=readw(ETHER_RX_CTL(dev->base_addr));
826 tmp&=~(ETHER_RX_CTL_RXEN_MSK | ETHER_RX_CTL_ENGOOD_MSK);
827 tmp|=ETHER_RX_CTL_RXHALT_MSK;
828 writew(tmp,ETHER_RX_CTL(dev->base_addr));
829
830 tmp=readl(ETHER_TX_CTL(dev->base_addr));
831 tmp&=~ETHER_TX_CTL_TXEN_MSK;
832 tmp|=ETHER_TX_CTL_TXHALT_MSK;
833 writel(tmp,ETHER_TX_CTL(dev->base_addr));
834
835 /* Free up system resources */
836 free_irq(dev->irq,dev);
837 free_irq(2,dev);
838 iounmap(priv->dma_data);
839
840 return 0;
841}
842
843
844static void ether00_get_ethernet_address(struct net_device* dev)
845{
846 struct mtd_info *mymtd=NULL;
847 int i;
848 size_t retlen;
849
850 /*
851 * For the Epxa10 dev board (camelot), the ethernet MAC
852 * address is of the form 00:aa:aa:00:xx:xx where
853 * 00:aa:aa is the Altera vendor ID and xx:xx is the
854 * last 2 bytes of the board serial number, as programmed
855 * into the OTP area of the flash device on EBI1. If this
856 * isn't an expa10 dev board, or there's no mtd support to
857 * read the serial number from flash then we'll force the
858 * use to set their own mac address using ifconfig.
859 */
860
861#ifdef CONFIG_ARCH_CAMELOT
862#ifdef CONFIG_MTD
863 /* get the mtd_info structure for the first mtd device*/
864 for(i=0;i<MAX_MTD_DEVICES;i++){
865 mymtd=get_mtd_device(NULL,i);
866 if(!mymtd||!strcmp(mymtd->name,"EPXA10DB flash"))
867 break;
868 }
869
870 if(!mymtd || !mymtd->read_user_prot_reg){
871 printk(KERN_WARNING "%s: Failed to read MAC address from flash\n",dev->name);
872 }else{
873 mymtd->read_user_prot_reg(mymtd,2,1,&retlen,&dev->dev_addr[5]);
874 mymtd->read_user_prot_reg(mymtd,3,1,&retlen,&dev->dev_addr[4]);
875 dev->dev_addr[3]=0;
876 dev->dev_addr[2]=vendor_id[1];
877 dev->dev_addr[1]=vendor_id[0];
878 dev->dev_addr[0]=0;
879 }
880#else
881 printk(KERN_WARNING "%s: MTD support required to read MAC address from EPXA10 dev board\n", dev->name);
882#endif
883#endif
884
885 if (!is_valid_ether_addr(dev->dev_addr))
886 printk("%s: Invalid ethernet MAC address. Please set using "
887 "ifconfig\n", dev->name);
888
889}
890
891/*
892 * Keep a mapping of dev_info addresses -> port lines to use when
893 * removing ports dev==NULL indicates unused entry
894 */
895
896
897static struct net_device* dev_list[ETH_NR];
898
899static int ether00_add_device(struct pldhs_dev_info* dev_info,void* dev_ps_data)
900{
901 struct net_device *dev;
902 struct net_priv *priv;
903 void *map_addr;
904 int result;
905 int i;
906
907 i=0;
908 while(dev_list[i] && i < ETH_NR)
909 i++;
910
911 if(i==ETH_NR){
912 printk(KERN_WARNING "ether00: Maximum number of ports reached\n");
913 return 0;
914 }
915
916
917 if (!request_mem_region(dev_info->base_addr, MAC_REG_SIZE, "ether00"))
918 return -EBUSY;
919
920 dev = alloc_etherdev(sizeof(struct net_priv));
921 if(!dev) {
922 result = -ENOMEM;
923 goto out_release;
924 }
925 priv = dev->priv;
926
927 priv->tq_memupdate.routine=ether00_mem_update;
928 priv->tq_memupdate.data=(void*) dev;
929
930 spin_lock_init(&priv->rx_lock);
931
932 map_addr=ioremap_nocache(dev_info->base_addr,SZ_4K);
933 if(!map_addr){
934 result = -ENOMEM;
935 out_kfree;
936 }
937
938 dev->open=ether00_open;
939 dev->stop=ether00_stop;
940 dev->set_multicast_list=ether00_set_multicast;
941 dev->hard_start_xmit=ether00_tx;
942 dev->get_stats=ether00_stats;
943
944 ether00_get_ethernet_address(dev);
945
946 SET_MODULE_OWNER(dev);
947
948 dev->base_addr=(unsigned int)map_addr;
949 dev->irq=dev_info->irq;
950 dev->features=NETIF_F_DYNALLOC | NETIF_F_HW_CSUM;
951
952 result=register_netdev(dev);
953 if(result){
954 printk("Ether00: Error %i registering driver\n",result);
955 goto out_unmap;
956 }
957 printk("registered ether00 device at %#x\n",dev_info->base_addr);
958
959 dev_list[i]=dev;
960
961 return result;
962
963 out_unmap:
964 iounmap(map_addr);
965 out_kfree:
966 free_netdev(dev);
967 out_release:
968 release_mem_region(dev_info->base_addr, MAC_REG_SIZE);
969 return result;
970}
971
972
973static int ether00_remove_devices(void)
974{
975 int i;
976
977 for(i=0;i<ETH_NR;i++){
978 if(dev_list[i]){
979 netif_device_detach(dev_list[i]);
980 unregister_netdev(dev_list[i]);
981 iounmap((void*)dev_list[i]->base_addr);
982 release_mem_region(dev_list[i]->base_addr, MAC_REG_SIZE);
983 free_netdev(dev_list[i]);
984 dev_list[i]=0;
985 }
986 }
987 return 0;
988}
989
990static struct pld_hotswap_ops ether00_pldhs_ops={
991 .name = ETHER00_NAME,
992 .add_device = ether00_add_device,
993 .remove_devices = ether00_remove_devices,
994};
995
996
997static void __exit ether00_cleanup_module(void)
998{
999 int result;
1000 result=ether00_remove_devices();
1001 if(result)
1002 printk(KERN_WARNING "ether00: failed to remove all devices\n");
1003
1004 pldhs_unregister_driver(ETHER00_NAME);
1005}
1006module_exit(ether00_cleanup_module);
1007
1008
1009static int __init ether00_mod_init(void)
1010{
1011 printk("mod init\n");
1012 return pldhs_register_driver(&ether00_pldhs_ops);
1013
1014}
1015
1016module_init(ether00_mod_init);
1017
diff --git a/drivers/net/arm/ether3.c b/drivers/net/arm/ether3.c
index 1cc53abc3a39..f1d5b1027ff7 100644
--- a/drivers/net/arm/ether3.c
+++ b/drivers/net/arm/ether3.c
@@ -69,7 +69,6 @@
69#include <asm/system.h> 69#include <asm/system.h>
70#include <asm/ecard.h> 70#include <asm/ecard.h>
71#include <asm/io.h> 71#include <asm/io.h>
72#include <asm/irq.h>
73 72
74static char version[] __initdata = "ether3 ethernet driver (c) 1995-2000 R.M.King v1.17\n"; 73static char version[] __initdata = "ether3 ethernet driver (c) 1995-2000 R.M.King v1.17\n";
75 74
diff --git a/drivers/net/arm/etherh.c b/drivers/net/arm/etherh.c
index 942a2819576c..6a93b666eb72 100644
--- a/drivers/net/arm/etherh.c
+++ b/drivers/net/arm/etherh.c
@@ -50,7 +50,6 @@
50#include <asm/system.h> 50#include <asm/system.h>
51#include <asm/ecard.h> 51#include <asm/ecard.h>
52#include <asm/io.h> 52#include <asm/io.h>
53#include <asm/irq.h>
54 53
55#include "../8390.h" 54#include "../8390.h"
56 55
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-18 11:16:48 -0500