15 files changed, 23 insertions, 23 deletions

diff --git a/drivers/net/wireless/ath/ath5k/reg.h b/drivers/net/wireless/ath/ath5k/reg.h
index 7ad05d401ab5..fd14b9103951 100644
--- a/drivers/net/wireless/ath/ath5k/reg.h
+++ b/drivers/net/wireless/ath/ath5k/reg.h
@@ -1064,7 +1064,7 @@
 /*
  * EEPROM command register
  */
-#define AR5K_EEPROM_CMD         0x6008                  /* Register Addres */
+#define AR5K_EEPROM_CMD         0x6008                  /* Register Address */
 #define AR5K_EEPROM_CMD_READ    0x00000001      /* EEPROM read */
 #define AR5K_EEPROM_CMD_WRITE   0x00000002      /* EEPROM write */
 #define AR5K_EEPROM_CMD_RESET   0x00000004      /* EEPROM reset */
@@ -1084,7 +1084,7 @@
 /*
  * EEPROM config register
  */
-#define AR5K_EEPROM_CFG                 0x6010                  /* Register Addres */
+#define AR5K_EEPROM_CFG                 0x6010                  /* Register Address */
 #define AR5K_EEPROM_CFG_SIZE            0x00000003              /* Size determination override */
 #define AR5K_EEPROM_CFG_SIZE_AUTO       0
 #define AR5K_EEPROM_CFG_SIZE_4KBIT      1
@@ -1126,7 +1126,7 @@
  * Second station id register (Upper 16 bits of MAC address + PCU settings)
  */
 #define AR5K_STA_ID1                    0x8004                  /* Register Address */
-#define AR5K_STA_ID1_ADDR_U16           0x0000ffff      /* Upper 16 bits of MAC addres */
+#define AR5K_STA_ID1_ADDR_U16           0x0000ffff      /* Upper 16 bits of MAC address */
 #define AR5K_STA_ID1_AP                 0x00010000      /* Set AP mode */
 #define AR5K_STA_ID1_ADHOC              0x00020000      /* Set Ad-Hoc mode */
 #define AR5K_STA_ID1_PWR_SV             0x00040000      /* Power save reporting */
diff --git a/drivers/net/wireless/b43/phy_g.c b/drivers/net/wireless/b43/phy_g.c
index 0dc33b65e86b..be4828167012 100644
--- a/drivers/net/wireless/b43/phy_g.c
+++ b/drivers/net/wireless/b43/phy_g.c
@@ -1919,7 +1919,7 @@ static void b43_hardware_pctl_init_gphy(struct b43_wldev *dev)
         b43_hf_write(dev, b43_hf_read(dev) | B43_HF_HWPCTL);
 }
 
-/* Intialize B/G PHY power control */
+/* Initialize B/G PHY power control */
 static void b43_phy_init_pctl(struct b43_wldev *dev)
 {
         struct ssb_bus *bus = dev->dev->bus;
diff --git a/drivers/net/wireless/b43legacy/phy.c b/drivers/net/wireless/b43legacy/phy.c
index 35033dd342ce..28e477d01587 100644
--- a/drivers/net/wireless/b43legacy/phy.c
+++ b/drivers/net/wireless/b43legacy/phy.c
@@ -153,7 +153,7 @@ void b43legacy_phy_calibrate(struct b43legacy_wldev *dev)
         phy->calibrated = 1;
 }
 
-/* intialize B PHY power control
+/* initialize B PHY power control
  * as described in http://bcm-specs.sipsolutions.net/InitPowerControl
  */
 static void b43legacy_phy_init_pctl(struct b43legacy_wldev *dev)
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-ict.c b/drivers/net/wireless/iwlwifi/iwl-agn-ict.c
index a5dbfea1bfad..b5cb3be0eb4b 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-ict.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-ict.c
@@ -197,7 +197,7 @@ static irqreturn_t iwl_isr(int irq, void *data)
 
  none:
         /* re-enable interrupts here since we don't have anything to service. */
-        /* only Re-enable if diabled by irq  and no schedules tasklet. */
+        /* only Re-enable if disabled by irq  and no schedules tasklet. */
         if (test_bit(STATUS_INT_ENABLED, &priv->status) && !priv->_agn.inta)
                 iwl_enable_interrupts(priv);
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index f13a83a7e62b..36335b1b54d4 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -1154,7 +1154,7 @@ static void iwl_irq_tasklet_legacy(struct iwl_priv *priv)
         }
 
         /* Re-enable all interrupts */
-        /* only Re-enable if diabled by irq */
+        /* only Re-enable if disabled by irq */
         if (test_bit(STATUS_INT_ENABLED, &priv->status))
                 iwl_enable_interrupts(priv);
 
@@ -1368,7 +1368,7 @@ static void iwl_irq_tasklet(struct iwl_priv *priv)
         }
 
         /* Re-enable all interrupts */
-        /* only Re-enable if diabled by irq */
+        /* only Re-enable if disabled by irq */
         if (test_bit(STATUS_INT_ENABLED, &priv->status))
                 iwl_enable_interrupts(priv);
 }
diff --git a/drivers/net/wireless/iwlwifi/iwl-legacy.c b/drivers/net/wireless/iwlwifi/iwl-legacy.c
index a08b4e56e6b1..bb1a742a98a0 100644
--- a/drivers/net/wireless/iwlwifi/iwl-legacy.c
+++ b/drivers/net/wireless/iwlwifi/iwl-legacy.c
@@ -619,7 +619,7 @@ unplugged:
 
 none:
         /* re-enable interrupts here since we don't have anything to service. */
-        /* only Re-enable if diabled by irq */
+        /* only Re-enable if disabled by irq */
         if (test_bit(STATUS_INT_ENABLED, &priv->status))
                 iwl_enable_interrupts(priv);
         spin_unlock_irqrestore(&priv->lock, flags);
diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c
index 4776323b1eba..49493d176515 100644
--- a/drivers/net/wireless/iwlwifi/iwl-sta.c
+++ b/drivers/net/wireless/iwlwifi/iwl-sta.c
@@ -107,7 +107,7 @@ static int iwl_process_add_sta_resp(struct iwl_priv *priv,
         /*
          * XXX: The MAC address in the command buffer is often changed from
          * the original sent to the device. That is, the MAC address
-         * written to the command buffer often is not the same MAC adress
+         * written to the command buffer often is not the same MAC address
          * read from the command buffer when the command returns. This
          * issue has not yet been resolved and this debugging is left to
          * observe the problem.
diff --git a/drivers/net/wireless/prism54/islpci_dev.c b/drivers/net/wireless/prism54/islpci_dev.c
index 2c8cc954d1b6..ec2c75d77cea 100644
--- a/drivers/net/wireless/prism54/islpci_dev.c
+++ b/drivers/net/wireless/prism54/islpci_dev.c
@@ -630,7 +630,7 @@ islpci_alloc_memory(islpci_private *priv)
         printk(KERN_DEBUG "islpci_alloc_memory\n");
 #endif
 
-        /* remap the PCI device base address to accessable */
+        /* remap the PCI device base address to accessible */
         if (!(priv->device_base =
               ioremap(pci_resource_start(priv->pdev, 0),
                       ISL38XX_PCI_MEM_SIZE))) {
@@ -709,7 +709,7 @@ islpci_alloc_memory(islpci_private *priv)
                                    PCI_DMA_FROMDEVICE);
                 if (!priv->pci_map_rx_address[counter]) {
                         /* error mapping the buffer to device
-                           accessable memory address */
+                           accessible memory address */
                         printk(KERN_ERR "failed to map skb DMA'able\n");
                         goto out_free;
                 }
@@ -773,7 +773,7 @@ islpci_free_memory(islpci_private *priv)
                 priv->data_low_rx[counter] = NULL;
         }
 
-        /* Free the acces control list and the WPA list */
+        /* Free the access control list and the WPA list */
         prism54_acl_clean(&priv->acl);
         prism54_wpa_bss_ie_clean(priv);
         mgt_clean(priv);
diff --git a/drivers/net/wireless/prism54/islpci_eth.c b/drivers/net/wireless/prism54/islpci_eth.c
index 2fc52bc2d7dd..d44f8e20cce0 100644
--- a/drivers/net/wireless/prism54/islpci_eth.c
+++ b/drivers/net/wireless/prism54/islpci_eth.c
@@ -450,7 +450,7 @@ islpci_eth_receive(islpci_private *priv)
                                    MAX_FRAGMENT_SIZE_RX + 2,
                                    PCI_DMA_FROMDEVICE);
                 if (unlikely(!priv->pci_map_rx_address[index])) {
-                        /* error mapping the buffer to device accessable memory address */
+                        /* error mapping the buffer to device accessible memory address */
                         DEBUG(SHOW_ERROR_MESSAGES,
                               "Error mapping DMA address\n");
 
diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c
index 658542d2efe1..f3da051df39e 100644
--- a/drivers/net/wireless/rt2x00/rt2x00mac.c
+++ b/drivers/net/wireless/rt2x00/rt2x00mac.c
@@ -273,7 +273,7 @@ int rt2x00mac_add_interface(struct ieee80211_hw *hw,
         intf->beacon = entry;
 
         /*
-         * The MAC adddress must be configured after the device
+         * The MAC address must be configured after the device
          * has been initialized. Otherwise the device can reset
          * the MAC registers.
          * The BSSID address must only be configured in AP mode,
diff --git a/drivers/net/wireless/wl1251/acx.h b/drivers/net/wireless/wl1251/acx.h
index e54b21a4f8b1..efcc3aaca14f 100644
--- a/drivers/net/wireless/wl1251/acx.h
+++ b/drivers/net/wireless/wl1251/acx.h
@@ -1272,10 +1272,10 @@ struct wl1251_acx_tid_cfg {
 /* OBSOLETE */
 #define WL1251_ACX_INTR_WAKE_ON_HOST    BIT(6)
 
-/* Trace meassge on MBOX #A */
+/* Trace message on MBOX #A */
 #define WL1251_ACX_INTR_TRACE_A         BIT(7)
 
-/* Trace meassge on MBOX #B */
+/* Trace message on MBOX #B */
 #define WL1251_ACX_INTR_TRACE_B         BIT(8)
 
 /* Command processing completion */
diff --git a/drivers/net/wireless/wl1251/wl1251.h b/drivers/net/wireless/wl1251/wl1251.h
index 13fbeeccf609..c0ce2c8b43b8 100644
--- a/drivers/net/wireless/wl1251/wl1251.h
+++ b/drivers/net/wireless/wl1251/wl1251.h
@@ -419,7 +419,7 @@ void wl1251_disable_interrupts(struct wl1251 *wl);
 #define WL1251_FW_NAME "wl1251-fw.bin"
 #define WL1251_NVS_NAME "wl1251-nvs.bin"
 
-#define WL1251_POWER_ON_SLEEP 10 /* in miliseconds */
+#define WL1251_POWER_ON_SLEEP 10 /* in milliseconds */
 
 #define WL1251_PART_DOWN_MEM_START      0x0
 #define WL1251_PART_DOWN_MEM_SIZE       0x16800
diff --git a/drivers/net/wireless/wl12xx/acx.h b/drivers/net/wireless/wl12xx/acx.h
index 9cbc3f40c8dd..7bd8e4db4a71 100644
--- a/drivers/net/wireless/wl12xx/acx.h
+++ b/drivers/net/wireless/wl12xx/acx.h
@@ -47,9 +47,9 @@
 #define WL1271_ACX_INTR_HW_AVAILABLE       BIT(5)
 /* The MISC bit is used for aggregation of RX, TxComplete and TX rate update */
 #define WL1271_ACX_INTR_DATA               BIT(6)
-/* Trace meassge on MBOX #A */
+/* Trace message on MBOX #A */
 #define WL1271_ACX_INTR_TRACE_A            BIT(7)
-/* Trace meassge on MBOX #B */
+/* Trace message on MBOX #B */
 #define WL1271_ACX_INTR_TRACE_B            BIT(8)
 
 #define WL1271_ACX_INTR_ALL                0xFFFFFFFF
diff --git a/drivers/net/wireless/wl12xx/wl12xx.h b/drivers/net/wireless/wl12xx/wl12xx.h
index ce3d31f98c55..9050dd9b62d2 100644
--- a/drivers/net/wireless/wl12xx/wl12xx.h
+++ b/drivers/net/wireless/wl12xx/wl12xx.h
@@ -416,8 +416,8 @@ int wl1271_plt_stop(struct wl1271 *wl);
 
 /* WL1271 needs a 200ms sleep after power on, and a 20ms sleep before power
    on in case is has been shut down shortly before */
-#define WL1271_PRE_POWER_ON_SLEEP 20 /* in miliseconds */
-#define WL1271_POWER_ON_SLEEP 200 /* in miliseconds */
+#define WL1271_PRE_POWER_ON_SLEEP 20 /* in milliseconds */
+#define WL1271_POWER_ON_SLEEP 200 /* in milliseconds */
 
 /* Macros to handle wl1271.sta_rate_set */
 #define HW_BG_RATES_MASK        0xffff
diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c
index ee82df62e646..3e5befe4d03b 100644
--- a/drivers/net/wireless/wl3501_cs.c
+++ b/drivers/net/wireless/wl3501_cs.c
@@ -192,7 +192,7 @@ static inline void wl3501_switch_page(struct wl3501_card *this, u8 page)
 }
 
 /*
- * Get Ethernet MAC addresss.
+ * Get Ethernet MAC address.
  *
  * WARNING: We switch to FPAGE0 and switc back again.
  *          Making sure there is no other WL function beening called by ISR.