1 files changed, 16 insertions, 1 deletions

diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c
index 04aa0b5f5b3d..873363acbacf 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c
@@ -1592,6 +1592,20 @@ void rtl92cu_get_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
         }
 }
 
+bool usb_cmd_send_packet(struct ieee80211_hw *hw, struct sk_buff *skb)
+{
+  /* Currently nothing happens here.
+   * Traffic stops after some seconds in WPA2 802.11n mode.
+   * Maybe because rtl8192cu chip should be set from here?
+   * If I understand correctly, the realtek vendor driver sends some urbs
+   * if its "here".
+   *
+   * This is maybe necessary:
+   * rtlpriv->cfg->ops->fill_tx_cmddesc(hw, buffer, 1, 1, skb);
+   */
+        return true;
+}
+
 void rtl92cu_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
 {
         struct rtl_priv *rtlpriv = rtl_priv(hw);
@@ -1939,7 +1953,8 @@ void rtl92cu_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
                                         recover = true;
                                 rtl_write_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 2,
                                                tmp_reg422 & (~BIT(6)));
-                                rtl92c_set_fw_rsvdpagepkt(hw, 0);
+                                rtl92c_set_fw_rsvdpagepkt(hw,
+                                                          &usb_cmd_send_packet);
                                 _rtl92cu_set_bcn_ctrl_reg(hw, BIT(3), 0);
                                 _rtl92cu_set_bcn_ctrl_reg(hw, 0, BIT(4));
                                 if (recover)