aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/sfc/qt202x_phy.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/sfc/qt202x_phy.c')
-rw-r--r--drivers/net/sfc/qt202x_phy.c450
1 files changed, 450 insertions, 0 deletions
diff --git a/drivers/net/sfc/qt202x_phy.c b/drivers/net/sfc/qt202x_phy.c
new file mode 100644
index 000000000000..e077bef08a50
--- /dev/null
+++ b/drivers/net/sfc/qt202x_phy.c
@@ -0,0 +1,450 @@
1/****************************************************************************
2 * Driver for Solarflare Solarstorm network controllers and boards
3 * Copyright 2006-2009 Solarflare Communications Inc.
4 *
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms of the GNU General Public License version 2 as published
7 * by the Free Software Foundation, incorporated herein by reference.
8 */
9/*
10 * Driver for AMCC QT202x SFP+ and XFP adapters; see www.amcc.com for details
11 */
12
13#include <linux/slab.h>
14#include <linux/timer.h>
15#include <linux/delay.h>
16#include "efx.h"
17#include "mdio_10g.h"
18#include "phy.h"
19#include "nic.h"
20
21#define QT202X_REQUIRED_DEVS (MDIO_DEVS_PCS | \
22 MDIO_DEVS_PMAPMD | \
23 MDIO_DEVS_PHYXS)
24
25#define QT202X_LOOPBACKS ((1 << LOOPBACK_PCS) | \
26 (1 << LOOPBACK_PMAPMD) | \
27 (1 << LOOPBACK_PHYXS_WS))
28
29/****************************************************************************/
30/* Quake-specific MDIO registers */
31#define MDIO_QUAKE_LED0_REG (0xD006)
32
33/* QT2025C only */
34#define PCS_FW_HEARTBEAT_REG 0xd7ee
35#define PCS_FW_HEARTB_LBN 0
36#define PCS_FW_HEARTB_WIDTH 8
37#define PCS_FW_PRODUCT_CODE_1 0xd7f0
38#define PCS_FW_VERSION_1 0xd7f3
39#define PCS_FW_BUILD_1 0xd7f6
40#define PCS_UC8051_STATUS_REG 0xd7fd
41#define PCS_UC_STATUS_LBN 0
42#define PCS_UC_STATUS_WIDTH 8
43#define PCS_UC_STATUS_FW_SAVE 0x20
44#define PMA_PMD_FTX_CTRL2_REG 0xc309
45#define PMA_PMD_FTX_STATIC_LBN 13
46#define PMA_PMD_VEND1_REG 0xc001
47#define PMA_PMD_VEND1_LBTXD_LBN 15
48#define PCS_VEND1_REG 0xc000
49#define PCS_VEND1_LBTXD_LBN 5
50
51void falcon_qt202x_set_led(struct efx_nic *p, int led, int mode)
52{
53 int addr = MDIO_QUAKE_LED0_REG + led;
54 efx_mdio_write(p, MDIO_MMD_PMAPMD, addr, mode);
55}
56
57struct qt202x_phy_data {
58 enum efx_phy_mode phy_mode;
59 bool bug17190_in_bad_state;
60 unsigned long bug17190_timer;
61 u32 firmware_ver;
62};
63
64#define QT2022C2_MAX_RESET_TIME 500
65#define QT2022C2_RESET_WAIT 10
66
67#define QT2025C_MAX_HEARTB_TIME (5 * HZ)
68#define QT2025C_HEARTB_WAIT 100
69#define QT2025C_MAX_FWSTART_TIME (25 * HZ / 10)
70#define QT2025C_FWSTART_WAIT 100
71
72#define BUG17190_INTERVAL (2 * HZ)
73
74static int qt2025c_wait_heartbeat(struct efx_nic *efx)
75{
76 unsigned long timeout = jiffies + QT2025C_MAX_HEARTB_TIME;
77 int reg, old_counter = 0;
78
79 /* Wait for firmware heartbeat to start */
80 for (;;) {
81 int counter;
82 reg = efx_mdio_read(efx, MDIO_MMD_PCS, PCS_FW_HEARTBEAT_REG);
83 if (reg < 0)
84 return reg;
85 counter = ((reg >> PCS_FW_HEARTB_LBN) &
86 ((1 << PCS_FW_HEARTB_WIDTH) - 1));
87 if (old_counter == 0)
88 old_counter = counter;
89 else if (counter != old_counter)
90 break;
91 if (time_after(jiffies, timeout)) {
92 /* Some cables have EEPROMs that conflict with the
93 * PHY's on-board EEPROM so it cannot load firmware */
94 EFX_ERR(efx, "If an SFP+ direct attach cable is"
95 " connected, please check that it complies"
96 " with the SFP+ specification\n");
97 return -ETIMEDOUT;
98 }
99 msleep(QT2025C_HEARTB_WAIT);
100 }
101
102 return 0;
103}
104
105static int qt2025c_wait_fw_status_good(struct efx_nic *efx)
106{
107 unsigned long timeout = jiffies + QT2025C_MAX_FWSTART_TIME;
108 int reg;
109
110 /* Wait for firmware status to look good */
111 for (;;) {
112 reg = efx_mdio_read(efx, MDIO_MMD_PCS, PCS_UC8051_STATUS_REG);
113 if (reg < 0)
114 return reg;
115 if ((reg &
116 ((1 << PCS_UC_STATUS_WIDTH) - 1) << PCS_UC_STATUS_LBN) >=
117 PCS_UC_STATUS_FW_SAVE)
118 break;
119 if (time_after(jiffies, timeout))
120 return -ETIMEDOUT;
121 msleep(QT2025C_FWSTART_WAIT);
122 }
123
124 return 0;
125}
126
127static void qt2025c_restart_firmware(struct efx_nic *efx)
128{
129 /* Restart microcontroller execution of firmware from RAM */
130 efx_mdio_write(efx, 3, 0xe854, 0x00c0);
131 efx_mdio_write(efx, 3, 0xe854, 0x0040);
132 msleep(50);
133}
134
135static int qt2025c_wait_reset(struct efx_nic *efx)
136{
137 int rc;
138
139 rc = qt2025c_wait_heartbeat(efx);
140 if (rc != 0)
141 return rc;
142
143 rc = qt2025c_wait_fw_status_good(efx);
144 if (rc == -ETIMEDOUT) {
145 /* Bug 17689: occasionally heartbeat starts but firmware status
146 * code never progresses beyond 0x00. Try again, once, after
147 * restarting execution of the firmware image. */
148 EFX_LOG(efx, "bashing QT2025C microcontroller\n");
149 qt2025c_restart_firmware(efx);
150 rc = qt2025c_wait_heartbeat(efx);
151 if (rc != 0)
152 return rc;
153 rc = qt2025c_wait_fw_status_good(efx);
154 }
155
156 return rc;
157}
158
159static void qt2025c_firmware_id(struct efx_nic *efx)
160{
161 struct qt202x_phy_data *phy_data = efx->phy_data;
162 u8 firmware_id[9];
163 size_t i;
164
165 for (i = 0; i < sizeof(firmware_id); i++)
166 firmware_id[i] = efx_mdio_read(efx, MDIO_MMD_PCS,
167 PCS_FW_PRODUCT_CODE_1 + i);
168 EFX_INFO(efx, "QT2025C firmware %xr%d v%d.%d.%d.%d [20%02d-%02d-%02d]\n",
169 (firmware_id[0] << 8) | firmware_id[1], firmware_id[2],
170 firmware_id[3] >> 4, firmware_id[3] & 0xf,
171 firmware_id[4], firmware_id[5],
172 firmware_id[6], firmware_id[7], firmware_id[8]);
173 phy_data->firmware_ver = ((firmware_id[3] & 0xf0) << 20) |
174 ((firmware_id[3] & 0x0f) << 16) |
175 (firmware_id[4] << 8) | firmware_id[5];
176}
177
178static void qt2025c_bug17190_workaround(struct efx_nic *efx)
179{
180 struct qt202x_phy_data *phy_data = efx->phy_data;
181
182 /* The PHY can get stuck in a state where it reports PHY_XS and PMA/PMD
183 * layers up, but PCS down (no block_lock). If we notice this state
184 * persisting for a couple of seconds, we switch PMA/PMD loopback
185 * briefly on and then off again, which is normally sufficient to
186 * recover it.
187 */
188 if (efx->link_state.up ||
189 !efx_mdio_links_ok(efx, MDIO_DEVS_PMAPMD | MDIO_DEVS_PHYXS)) {
190 phy_data->bug17190_in_bad_state = false;
191 return;
192 }
193
194 if (!phy_data->bug17190_in_bad_state) {
195 phy_data->bug17190_in_bad_state = true;
196 phy_data->bug17190_timer = jiffies + BUG17190_INTERVAL;
197 return;
198 }
199
200 if (time_after_eq(jiffies, phy_data->bug17190_timer)) {
201 EFX_LOG(efx, "bashing QT2025C PMA/PMD\n");
202 efx_mdio_set_flag(efx, MDIO_MMD_PMAPMD, MDIO_CTRL1,
203 MDIO_PMA_CTRL1_LOOPBACK, true);
204 msleep(100);
205 efx_mdio_set_flag(efx, MDIO_MMD_PMAPMD, MDIO_CTRL1,
206 MDIO_PMA_CTRL1_LOOPBACK, false);
207 phy_data->bug17190_timer = jiffies + BUG17190_INTERVAL;
208 }
209}
210
211static int qt2025c_select_phy_mode(struct efx_nic *efx)
212{
213 struct qt202x_phy_data *phy_data = efx->phy_data;
214 struct falcon_board *board = falcon_board(efx);
215 int reg, rc, i;
216 uint16_t phy_op_mode;
217
218 /* Only 2.0.1.0+ PHY firmware supports the more optimal SFP+
219 * Self-Configure mode. Don't attempt any switching if we encounter
220 * older firmware. */
221 if (phy_data->firmware_ver < 0x02000100)
222 return 0;
223
224 /* In general we will get optimal behaviour in "SFP+ Self-Configure"
225 * mode; however, that powers down most of the PHY when no module is
226 * present, so we must use a different mode (any fixed mode will do)
227 * to be sure that loopbacks will work. */
228 phy_op_mode = (efx->loopback_mode == LOOPBACK_NONE) ? 0x0038 : 0x0020;
229
230 /* Only change mode if really necessary */
231 reg = efx_mdio_read(efx, 1, 0xc319);
232 if ((reg & 0x0038) == phy_op_mode)
233 return 0;
234 EFX_LOG(efx, "Switching PHY to mode 0x%04x\n", phy_op_mode);
235
236 /* This sequence replicates the register writes configured in the boot
237 * EEPROM (including the differences between board revisions), except
238 * that the operating mode is changed, and the PHY is prevented from
239 * unnecessarily reloading the main firmware image again. */
240 efx_mdio_write(efx, 1, 0xc300, 0x0000);
241 /* (Note: this portion of the boot EEPROM sequence, which bit-bashes 9
242 * STOPs onto the firmware/module I2C bus to reset it, varies across
243 * board revisions, as the bus is connected to different GPIO/LED
244 * outputs on the PHY.) */
245 if (board->major == 0 && board->minor < 2) {
246 efx_mdio_write(efx, 1, 0xc303, 0x4498);
247 for (i = 0; i < 9; i++) {
248 efx_mdio_write(efx, 1, 0xc303, 0x4488);
249 efx_mdio_write(efx, 1, 0xc303, 0x4480);
250 efx_mdio_write(efx, 1, 0xc303, 0x4490);
251 efx_mdio_write(efx, 1, 0xc303, 0x4498);
252 }
253 } else {
254 efx_mdio_write(efx, 1, 0xc303, 0x0920);
255 efx_mdio_write(efx, 1, 0xd008, 0x0004);
256 for (i = 0; i < 9; i++) {
257 efx_mdio_write(efx, 1, 0xc303, 0x0900);
258 efx_mdio_write(efx, 1, 0xd008, 0x0005);
259 efx_mdio_write(efx, 1, 0xc303, 0x0920);
260 efx_mdio_write(efx, 1, 0xd008, 0x0004);
261 }
262 efx_mdio_write(efx, 1, 0xc303, 0x4900);
263 }
264 efx_mdio_write(efx, 1, 0xc303, 0x4900);
265 efx_mdio_write(efx, 1, 0xc302, 0x0004);
266 efx_mdio_write(efx, 1, 0xc316, 0x0013);
267 efx_mdio_write(efx, 1, 0xc318, 0x0054);
268 efx_mdio_write(efx, 1, 0xc319, phy_op_mode);
269 efx_mdio_write(efx, 1, 0xc31a, 0x0098);
270 efx_mdio_write(efx, 3, 0x0026, 0x0e00);
271 efx_mdio_write(efx, 3, 0x0027, 0x0013);
272 efx_mdio_write(efx, 3, 0x0028, 0xa528);
273 efx_mdio_write(efx, 1, 0xd006, 0x000a);
274 efx_mdio_write(efx, 1, 0xd007, 0x0009);
275 efx_mdio_write(efx, 1, 0xd008, 0x0004);
276 /* This additional write is not present in the boot EEPROM. It
277 * prevents the PHY's internal boot ROM doing another pointless (and
278 * slow) reload of the firmware image (the microcontroller's code
279 * memory is not affected by the microcontroller reset). */
280 efx_mdio_write(efx, 1, 0xc317, 0x00ff);
281 efx_mdio_write(efx, 1, 0xc300, 0x0002);
282 msleep(20);
283
284 /* Restart microcontroller execution of firmware from RAM */
285 qt2025c_restart_firmware(efx);
286
287 /* Wait for the microcontroller to be ready again */
288 rc = qt2025c_wait_reset(efx);
289 if (rc < 0) {
290 EFX_ERR(efx, "PHY microcontroller reset during mode switch "
291 "timed out\n");
292 return rc;
293 }
294
295 return 0;
296}
297
298static int qt202x_reset_phy(struct efx_nic *efx)
299{
300 int rc;
301
302 if (efx->phy_type == PHY_TYPE_QT2025C) {
303 /* Wait for the reset triggered by falcon_reset_hw()
304 * to complete */
305 rc = qt2025c_wait_reset(efx);
306 if (rc < 0)
307 goto fail;
308 } else {
309 /* Reset the PHYXS MMD. This is documented as doing
310 * a complete soft reset. */
311 rc = efx_mdio_reset_mmd(efx, MDIO_MMD_PHYXS,
312 QT2022C2_MAX_RESET_TIME /
313 QT2022C2_RESET_WAIT,
314 QT2022C2_RESET_WAIT);
315 if (rc < 0)
316 goto fail;
317 }
318
319 /* Wait 250ms for the PHY to complete bootup */
320 msleep(250);
321
322 falcon_board(efx)->type->init_phy(efx);
323
324 return 0;
325
326 fail:
327 EFX_ERR(efx, "PHY reset timed out\n");
328 return rc;
329}
330
331static int qt202x_phy_probe(struct efx_nic *efx)
332{
333 struct qt202x_phy_data *phy_data;
334
335 phy_data = kzalloc(sizeof(struct qt202x_phy_data), GFP_KERNEL);
336 if (!phy_data)
337 return -ENOMEM;
338 efx->phy_data = phy_data;
339 phy_data->phy_mode = efx->phy_mode;
340 phy_data->bug17190_in_bad_state = false;
341 phy_data->bug17190_timer = 0;
342
343 efx->mdio.mmds = QT202X_REQUIRED_DEVS;
344 efx->mdio.mode_support = MDIO_SUPPORTS_C45 | MDIO_EMULATE_C22;
345 efx->loopback_modes = QT202X_LOOPBACKS | FALCON_XMAC_LOOPBACKS;
346 return 0;
347}
348
349static int qt202x_phy_init(struct efx_nic *efx)
350{
351 u32 devid;
352 int rc;
353
354 rc = qt202x_reset_phy(efx);
355 if (rc) {
356 EFX_ERR(efx, "PHY init failed\n");
357 return rc;
358 }
359
360 devid = efx_mdio_read_id(efx, MDIO_MMD_PHYXS);
361 EFX_INFO(efx, "PHY ID reg %x (OUI %06x model %02x revision %x)\n",
362 devid, efx_mdio_id_oui(devid), efx_mdio_id_model(devid),
363 efx_mdio_id_rev(devid));
364
365 if (efx->phy_type == PHY_TYPE_QT2025C)
366 qt2025c_firmware_id(efx);
367
368 return 0;
369}
370
371static int qt202x_link_ok(struct efx_nic *efx)
372{
373 return efx_mdio_links_ok(efx, QT202X_REQUIRED_DEVS);
374}
375
376static bool qt202x_phy_poll(struct efx_nic *efx)
377{
378 bool was_up = efx->link_state.up;
379
380 efx->link_state.up = qt202x_link_ok(efx);
381 efx->link_state.speed = 10000;
382 efx->link_state.fd = true;
383 efx->link_state.fc = efx->wanted_fc;
384
385 if (efx->phy_type == PHY_TYPE_QT2025C)
386 qt2025c_bug17190_workaround(efx);
387
388 return efx->link_state.up != was_up;
389}
390
391static int qt202x_phy_reconfigure(struct efx_nic *efx)
392{
393 struct qt202x_phy_data *phy_data = efx->phy_data;
394
395 if (efx->phy_type == PHY_TYPE_QT2025C) {
396 int rc = qt2025c_select_phy_mode(efx);
397 if (rc)
398 return rc;
399
400 /* There are several different register bits which can
401 * disable TX (and save power) on direct-attach cables
402 * or optical transceivers, varying somewhat between
403 * firmware versions. Only 'static mode' appears to
404 * cover everything. */
405 mdio_set_flag(
406 &efx->mdio, efx->mdio.prtad, MDIO_MMD_PMAPMD,
407 PMA_PMD_FTX_CTRL2_REG, 1 << PMA_PMD_FTX_STATIC_LBN,
408 efx->phy_mode & PHY_MODE_TX_DISABLED ||
409 efx->phy_mode & PHY_MODE_LOW_POWER ||
410 efx->loopback_mode == LOOPBACK_PCS ||
411 efx->loopback_mode == LOOPBACK_PMAPMD);
412 } else {
413 /* Reset the PHY when moving from tx off to tx on */
414 if (!(efx->phy_mode & PHY_MODE_TX_DISABLED) &&
415 (phy_data->phy_mode & PHY_MODE_TX_DISABLED))
416 qt202x_reset_phy(efx);
417
418 efx_mdio_transmit_disable(efx);
419 }
420
421 efx_mdio_phy_reconfigure(efx);
422
423 phy_data->phy_mode = efx->phy_mode;
424
425 return 0;
426}
427
428static void qt202x_phy_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd)
429{
430 mdio45_ethtool_gset(&efx->mdio, ecmd);
431}
432
433static void qt202x_phy_remove(struct efx_nic *efx)
434{
435 /* Free the context block */
436 kfree(efx->phy_data);
437 efx->phy_data = NULL;
438}
439
440struct efx_phy_operations falcon_qt202x_phy_ops = {
441 .probe = qt202x_phy_probe,
442 .init = qt202x_phy_init,
443 .reconfigure = qt202x_phy_reconfigure,
444 .poll = qt202x_phy_poll,
445 .fini = efx_port_dummy_op_void,
446 .remove = qt202x_phy_remove,
447 .get_settings = qt202x_phy_get_settings,
448 .set_settings = efx_mdio_set_settings,
449 .test_alive = efx_mdio_test_alive,
450};
generated by cgit v1.2.2 (git 2.25.0) at 2025-07-29 07:52:55 -0400