diff options
Diffstat (limited to 'drivers/net/qlge/qlge_main.c')
-rw-r--r-- | drivers/net/qlge/qlge_main.c | 3954 |
1 files changed, 3954 insertions, 0 deletions
diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c new file mode 100644 index 000000000000..ad878e2b9ded --- /dev/null +++ b/drivers/net/qlge/qlge_main.c | |||
@@ -0,0 +1,3954 @@ | |||
1 | /* | ||
2 | * QLogic qlge NIC HBA Driver | ||
3 | * Copyright (c) 2003-2008 QLogic Corporation | ||
4 | * See LICENSE.qlge for copyright and licensing details. | ||
5 | * Author: Linux qlge network device driver by | ||
6 | * Ron Mercer <ron.mercer@qlogic.com> | ||
7 | */ | ||
8 | #include <linux/kernel.h> | ||
9 | #include <linux/init.h> | ||
10 | #include <linux/types.h> | ||
11 | #include <linux/module.h> | ||
12 | #include <linux/list.h> | ||
13 | #include <linux/pci.h> | ||
14 | #include <linux/dma-mapping.h> | ||
15 | #include <linux/pagemap.h> | ||
16 | #include <linux/sched.h> | ||
17 | #include <linux/slab.h> | ||
18 | #include <linux/dmapool.h> | ||
19 | #include <linux/mempool.h> | ||
20 | #include <linux/spinlock.h> | ||
21 | #include <linux/kthread.h> | ||
22 | #include <linux/interrupt.h> | ||
23 | #include <linux/errno.h> | ||
24 | #include <linux/ioport.h> | ||
25 | #include <linux/in.h> | ||
26 | #include <linux/ip.h> | ||
27 | #include <linux/ipv6.h> | ||
28 | #include <net/ipv6.h> | ||
29 | #include <linux/tcp.h> | ||
30 | #include <linux/udp.h> | ||
31 | #include <linux/if_arp.h> | ||
32 | #include <linux/if_ether.h> | ||
33 | #include <linux/netdevice.h> | ||
34 | #include <linux/etherdevice.h> | ||
35 | #include <linux/ethtool.h> | ||
36 | #include <linux/skbuff.h> | ||
37 | #include <linux/rtnetlink.h> | ||
38 | #include <linux/if_vlan.h> | ||
39 | #include <linux/init.h> | ||
40 | #include <linux/delay.h> | ||
41 | #include <linux/mm.h> | ||
42 | #include <linux/vmalloc.h> | ||
43 | |||
44 | #include "qlge.h" | ||
45 | |||
46 | char qlge_driver_name[] = DRV_NAME; | ||
47 | const char qlge_driver_version[] = DRV_VERSION; | ||
48 | |||
49 | MODULE_AUTHOR("Ron Mercer <ron.mercer@qlogic.com>"); | ||
50 | MODULE_DESCRIPTION(DRV_STRING " "); | ||
51 | MODULE_LICENSE("GPL"); | ||
52 | MODULE_VERSION(DRV_VERSION); | ||
53 | |||
54 | static const u32 default_msg = | ||
55 | NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK | | ||
56 | /* NETIF_MSG_TIMER | */ | ||
57 | NETIF_MSG_IFDOWN | | ||
58 | NETIF_MSG_IFUP | | ||
59 | NETIF_MSG_RX_ERR | | ||
60 | NETIF_MSG_TX_ERR | | ||
61 | NETIF_MSG_TX_QUEUED | | ||
62 | NETIF_MSG_INTR | NETIF_MSG_TX_DONE | NETIF_MSG_RX_STATUS | | ||
63 | /* NETIF_MSG_PKTDATA | */ | ||
64 | NETIF_MSG_HW | NETIF_MSG_WOL | 0; | ||
65 | |||
66 | static int debug = 0x00007fff; /* defaults above */ | ||
67 | module_param(debug, int, 0); | ||
68 | MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)"); | ||
69 | |||
70 | #define MSIX_IRQ 0 | ||
71 | #define MSI_IRQ 1 | ||
72 | #define LEG_IRQ 2 | ||
73 | static int irq_type = MSIX_IRQ; | ||
74 | module_param(irq_type, int, MSIX_IRQ); | ||
75 | MODULE_PARM_DESC(irq_type, "0 = MSI-X, 1 = MSI, 2 = Legacy."); | ||
76 | |||
77 | static struct pci_device_id qlge_pci_tbl[] __devinitdata = { | ||
78 | {PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, QLGE_DEVICE_ID)}, | ||
79 | {PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, QLGE_DEVICE_ID1)}, | ||
80 | /* required last entry */ | ||
81 | {0,} | ||
82 | }; | ||
83 | |||
84 | MODULE_DEVICE_TABLE(pci, qlge_pci_tbl); | ||
85 | |||
86 | /* This hardware semaphore causes exclusive access to | ||
87 | * resources shared between the NIC driver, MPI firmware, | ||
88 | * FCOE firmware and the FC driver. | ||
89 | */ | ||
90 | static int ql_sem_trylock(struct ql_adapter *qdev, u32 sem_mask) | ||
91 | { | ||
92 | u32 sem_bits = 0; | ||
93 | |||
94 | switch (sem_mask) { | ||
95 | case SEM_XGMAC0_MASK: | ||
96 | sem_bits = SEM_SET << SEM_XGMAC0_SHIFT; | ||
97 | break; | ||
98 | case SEM_XGMAC1_MASK: | ||
99 | sem_bits = SEM_SET << SEM_XGMAC1_SHIFT; | ||
100 | break; | ||
101 | case SEM_ICB_MASK: | ||
102 | sem_bits = SEM_SET << SEM_ICB_SHIFT; | ||
103 | break; | ||
104 | case SEM_MAC_ADDR_MASK: | ||
105 | sem_bits = SEM_SET << SEM_MAC_ADDR_SHIFT; | ||
106 | break; | ||
107 | case SEM_FLASH_MASK: | ||
108 | sem_bits = SEM_SET << SEM_FLASH_SHIFT; | ||
109 | break; | ||
110 | case SEM_PROBE_MASK: | ||
111 | sem_bits = SEM_SET << SEM_PROBE_SHIFT; | ||
112 | break; | ||
113 | case SEM_RT_IDX_MASK: | ||
114 | sem_bits = SEM_SET << SEM_RT_IDX_SHIFT; | ||
115 | break; | ||
116 | case SEM_PROC_REG_MASK: | ||
117 | sem_bits = SEM_SET << SEM_PROC_REG_SHIFT; | ||
118 | break; | ||
119 | default: | ||
120 | QPRINTK(qdev, PROBE, ALERT, "Bad Semaphore mask!.\n"); | ||
121 | return -EINVAL; | ||
122 | } | ||
123 | |||
124 | ql_write32(qdev, SEM, sem_bits | sem_mask); | ||
125 | return !(ql_read32(qdev, SEM) & sem_bits); | ||
126 | } | ||
127 | |||
128 | int ql_sem_spinlock(struct ql_adapter *qdev, u32 sem_mask) | ||
129 | { | ||
130 | unsigned int seconds = 3; | ||
131 | do { | ||
132 | if (!ql_sem_trylock(qdev, sem_mask)) | ||
133 | return 0; | ||
134 | ssleep(1); | ||
135 | } while (--seconds); | ||
136 | return -ETIMEDOUT; | ||
137 | } | ||
138 | |||
139 | void ql_sem_unlock(struct ql_adapter *qdev, u32 sem_mask) | ||
140 | { | ||
141 | ql_write32(qdev, SEM, sem_mask); | ||
142 | ql_read32(qdev, SEM); /* flush */ | ||
143 | } | ||
144 | |||
145 | /* This function waits for a specific bit to come ready | ||
146 | * in a given register. It is used mostly by the initialize | ||
147 | * process, but is also used in kernel thread API such as | ||
148 | * netdev->set_multi, netdev->set_mac_address, netdev->vlan_rx_add_vid. | ||
149 | */ | ||
150 | int ql_wait_reg_rdy(struct ql_adapter *qdev, u32 reg, u32 bit, u32 err_bit) | ||
151 | { | ||
152 | u32 temp; | ||
153 | int count = UDELAY_COUNT; | ||
154 | |||
155 | while (count) { | ||
156 | temp = ql_read32(qdev, reg); | ||
157 | |||
158 | /* check for errors */ | ||
159 | if (temp & err_bit) { | ||
160 | QPRINTK(qdev, PROBE, ALERT, | ||
161 | "register 0x%.08x access error, value = 0x%.08x!.\n", | ||
162 | reg, temp); | ||
163 | return -EIO; | ||
164 | } else if (temp & bit) | ||
165 | return 0; | ||
166 | udelay(UDELAY_DELAY); | ||
167 | count--; | ||
168 | } | ||
169 | QPRINTK(qdev, PROBE, ALERT, | ||
170 | "Timed out waiting for reg %x to come ready.\n", reg); | ||
171 | return -ETIMEDOUT; | ||
172 | } | ||
173 | |||
174 | /* The CFG register is used to download TX and RX control blocks | ||
175 | * to the chip. This function waits for an operation to complete. | ||
176 | */ | ||
177 | static int ql_wait_cfg(struct ql_adapter *qdev, u32 bit) | ||
178 | { | ||
179 | int count = UDELAY_COUNT; | ||
180 | u32 temp; | ||
181 | |||
182 | while (count) { | ||
183 | temp = ql_read32(qdev, CFG); | ||
184 | if (temp & CFG_LE) | ||
185 | return -EIO; | ||
186 | if (!(temp & bit)) | ||
187 | return 0; | ||
188 | udelay(UDELAY_DELAY); | ||
189 | count--; | ||
190 | } | ||
191 | return -ETIMEDOUT; | ||
192 | } | ||
193 | |||
194 | |||
195 | /* Used to issue init control blocks to hw. Maps control block, | ||
196 | * sets address, triggers download, waits for completion. | ||
197 | */ | ||
198 | int ql_write_cfg(struct ql_adapter *qdev, void *ptr, int size, u32 bit, | ||
199 | u16 q_id) | ||
200 | { | ||
201 | u64 map; | ||
202 | int status = 0; | ||
203 | int direction; | ||
204 | u32 mask; | ||
205 | u32 value; | ||
206 | |||
207 | direction = | ||
208 | (bit & (CFG_LRQ | CFG_LR | CFG_LCQ)) ? PCI_DMA_TODEVICE : | ||
209 | PCI_DMA_FROMDEVICE; | ||
210 | |||
211 | map = pci_map_single(qdev->pdev, ptr, size, direction); | ||
212 | if (pci_dma_mapping_error(qdev->pdev, map)) { | ||
213 | QPRINTK(qdev, IFUP, ERR, "Couldn't map DMA area.\n"); | ||
214 | return -ENOMEM; | ||
215 | } | ||
216 | |||
217 | status = ql_wait_cfg(qdev, bit); | ||
218 | if (status) { | ||
219 | QPRINTK(qdev, IFUP, ERR, | ||
220 | "Timed out waiting for CFG to come ready.\n"); | ||
221 | goto exit; | ||
222 | } | ||
223 | |||
224 | status = ql_sem_spinlock(qdev, SEM_ICB_MASK); | ||
225 | if (status) | ||
226 | goto exit; | ||
227 | ql_write32(qdev, ICB_L, (u32) map); | ||
228 | ql_write32(qdev, ICB_H, (u32) (map >> 32)); | ||
229 | ql_sem_unlock(qdev, SEM_ICB_MASK); /* does flush too */ | ||
230 | |||
231 | mask = CFG_Q_MASK | (bit << 16); | ||
232 | value = bit | (q_id << CFG_Q_SHIFT); | ||
233 | ql_write32(qdev, CFG, (mask | value)); | ||
234 | |||
235 | /* | ||
236 | * Wait for the bit to clear after signaling hw. | ||
237 | */ | ||
238 | status = ql_wait_cfg(qdev, bit); | ||
239 | exit: | ||
240 | pci_unmap_single(qdev->pdev, map, size, direction); | ||
241 | return status; | ||
242 | } | ||
243 | |||
244 | /* Get a specific MAC address from the CAM. Used for debug and reg dump. */ | ||
245 | int ql_get_mac_addr_reg(struct ql_adapter *qdev, u32 type, u16 index, | ||
246 | u32 *value) | ||
247 | { | ||
248 | u32 offset = 0; | ||
249 | int status; | ||
250 | |||
251 | status = ql_sem_spinlock(qdev, SEM_MAC_ADDR_MASK); | ||
252 | if (status) | ||
253 | return status; | ||
254 | switch (type) { | ||
255 | case MAC_ADDR_TYPE_MULTI_MAC: | ||
256 | case MAC_ADDR_TYPE_CAM_MAC: | ||
257 | { | ||
258 | status = | ||
259 | ql_wait_reg_rdy(qdev, | ||
260 | MAC_ADDR_IDX, MAC_ADDR_MW, MAC_ADDR_E); | ||
261 | if (status) | ||
262 | goto exit; | ||
263 | ql_write32(qdev, MAC_ADDR_IDX, (offset++) | /* offset */ | ||
264 | (index << MAC_ADDR_IDX_SHIFT) | /* index */ | ||
265 | MAC_ADDR_ADR | MAC_ADDR_RS | type); /* type */ | ||
266 | status = | ||
267 | ql_wait_reg_rdy(qdev, | ||
268 | MAC_ADDR_IDX, MAC_ADDR_MR, MAC_ADDR_E); | ||
269 | if (status) | ||
270 | goto exit; | ||
271 | *value++ = ql_read32(qdev, MAC_ADDR_DATA); | ||
272 | status = | ||
273 | ql_wait_reg_rdy(qdev, | ||
274 | MAC_ADDR_IDX, MAC_ADDR_MW, MAC_ADDR_E); | ||
275 | if (status) | ||
276 | goto exit; | ||
277 | ql_write32(qdev, MAC_ADDR_IDX, (offset++) | /* offset */ | ||
278 | (index << MAC_ADDR_IDX_SHIFT) | /* index */ | ||
279 | MAC_ADDR_ADR | MAC_ADDR_RS | type); /* type */ | ||
280 | status = | ||
281 | ql_wait_reg_rdy(qdev, | ||
282 | MAC_ADDR_IDX, MAC_ADDR_MR, MAC_ADDR_E); | ||
283 | if (status) | ||
284 | goto exit; | ||
285 | *value++ = ql_read32(qdev, MAC_ADDR_DATA); | ||
286 | if (type == MAC_ADDR_TYPE_CAM_MAC) { | ||
287 | status = | ||
288 | ql_wait_reg_rdy(qdev, | ||
289 | MAC_ADDR_IDX, MAC_ADDR_MW, MAC_ADDR_E); | ||
290 | if (status) | ||
291 | goto exit; | ||
292 | ql_write32(qdev, MAC_ADDR_IDX, (offset++) | /* offset */ | ||
293 | (index << MAC_ADDR_IDX_SHIFT) | /* index */ | ||
294 | MAC_ADDR_ADR | MAC_ADDR_RS | type); /* type */ | ||
295 | status = | ||
296 | ql_wait_reg_rdy(qdev, MAC_ADDR_IDX, | ||
297 | MAC_ADDR_MR, MAC_ADDR_E); | ||
298 | if (status) | ||
299 | goto exit; | ||
300 | *value++ = ql_read32(qdev, MAC_ADDR_DATA); | ||
301 | } | ||
302 | break; | ||
303 | } | ||
304 | case MAC_ADDR_TYPE_VLAN: | ||
305 | case MAC_ADDR_TYPE_MULTI_FLTR: | ||
306 | default: | ||
307 | QPRINTK(qdev, IFUP, CRIT, | ||
308 | "Address type %d not yet supported.\n", type); | ||
309 | status = -EPERM; | ||
310 | } | ||
311 | exit: | ||
312 | ql_sem_unlock(qdev, SEM_MAC_ADDR_MASK); | ||
313 | return status; | ||
314 | } | ||
315 | |||
316 | /* Set up a MAC, multicast or VLAN address for the | ||
317 | * inbound frame matching. | ||
318 | */ | ||
319 | static int ql_set_mac_addr_reg(struct ql_adapter *qdev, u8 *addr, u32 type, | ||
320 | u16 index) | ||
321 | { | ||
322 | u32 offset = 0; | ||
323 | int status = 0; | ||
324 | |||
325 | status = ql_sem_spinlock(qdev, SEM_MAC_ADDR_MASK); | ||
326 | if (status) | ||
327 | return status; | ||
328 | switch (type) { | ||
329 | case MAC_ADDR_TYPE_MULTI_MAC: | ||
330 | case MAC_ADDR_TYPE_CAM_MAC: | ||
331 | { | ||
332 | u32 cam_output; | ||
333 | u32 upper = (addr[0] << 8) | addr[1]; | ||
334 | u32 lower = | ||
335 | (addr[2] << 24) | (addr[3] << 16) | (addr[4] << 8) | | ||
336 | (addr[5]); | ||
337 | |||
338 | QPRINTK(qdev, IFUP, INFO, | ||
339 | "Adding %s address %02x:%02x:%02x:%02x:%02x:%02x" | ||
340 | " at index %d in the CAM.\n", | ||
341 | ((type == | ||
342 | MAC_ADDR_TYPE_MULTI_MAC) ? "MULTICAST" : | ||
343 | "UNICAST"), addr[0], addr[1], addr[2], addr[3], | ||
344 | addr[4], addr[5], index); | ||
345 | |||
346 | status = | ||
347 | ql_wait_reg_rdy(qdev, | ||
348 | MAC_ADDR_IDX, MAC_ADDR_MW, MAC_ADDR_E); | ||
349 | if (status) | ||
350 | goto exit; | ||
351 | ql_write32(qdev, MAC_ADDR_IDX, (offset++) | /* offset */ | ||
352 | (index << MAC_ADDR_IDX_SHIFT) | /* index */ | ||
353 | type); /* type */ | ||
354 | ql_write32(qdev, MAC_ADDR_DATA, lower); | ||
355 | status = | ||
356 | ql_wait_reg_rdy(qdev, | ||
357 | MAC_ADDR_IDX, MAC_ADDR_MW, MAC_ADDR_E); | ||
358 | if (status) | ||
359 | goto exit; | ||
360 | ql_write32(qdev, MAC_ADDR_IDX, (offset++) | /* offset */ | ||
361 | (index << MAC_ADDR_IDX_SHIFT) | /* index */ | ||
362 | type); /* type */ | ||
363 | ql_write32(qdev, MAC_ADDR_DATA, upper); | ||
364 | status = | ||
365 | ql_wait_reg_rdy(qdev, | ||
366 | MAC_ADDR_IDX, MAC_ADDR_MW, MAC_ADDR_E); | ||
367 | if (status) | ||
368 | goto exit; | ||
369 | ql_write32(qdev, MAC_ADDR_IDX, (offset) | /* offset */ | ||
370 | (index << MAC_ADDR_IDX_SHIFT) | /* index */ | ||
371 | type); /* type */ | ||
372 | /* This field should also include the queue id | ||
373 | and possibly the function id. Right now we hardcode | ||
374 | the route field to NIC core. | ||
375 | */ | ||
376 | if (type == MAC_ADDR_TYPE_CAM_MAC) { | ||
377 | cam_output = (CAM_OUT_ROUTE_NIC | | ||
378 | (qdev-> | ||
379 | func << CAM_OUT_FUNC_SHIFT) | | ||
380 | (qdev-> | ||
381 | rss_ring_first_cq_id << | ||
382 | CAM_OUT_CQ_ID_SHIFT)); | ||
383 | if (qdev->vlgrp) | ||
384 | cam_output |= CAM_OUT_RV; | ||
385 | /* route to NIC core */ | ||
386 | ql_write32(qdev, MAC_ADDR_DATA, cam_output); | ||
387 | } | ||
388 | break; | ||
389 | } | ||
390 | case MAC_ADDR_TYPE_VLAN: | ||
391 | { | ||
392 | u32 enable_bit = *((u32 *) &addr[0]); | ||
393 | /* For VLAN, the addr actually holds a bit that | ||
394 | * either enables or disables the vlan id we are | ||
395 | * addressing. It's either MAC_ADDR_E on or off. | ||
396 | * That's bit-27 we're talking about. | ||
397 | */ | ||
398 | QPRINTK(qdev, IFUP, INFO, "%s VLAN ID %d %s the CAM.\n", | ||
399 | (enable_bit ? "Adding" : "Removing"), | ||
400 | index, (enable_bit ? "to" : "from")); | ||
401 | |||
402 | status = | ||
403 | ql_wait_reg_rdy(qdev, | ||
404 | MAC_ADDR_IDX, MAC_ADDR_MW, MAC_ADDR_E); | ||
405 | if (status) | ||
406 | goto exit; | ||
407 | ql_write32(qdev, MAC_ADDR_IDX, offset | /* offset */ | ||
408 | (index << MAC_ADDR_IDX_SHIFT) | /* index */ | ||
409 | type | /* type */ | ||
410 | enable_bit); /* enable/disable */ | ||
411 | break; | ||
412 | } | ||
413 | case MAC_ADDR_TYPE_MULTI_FLTR: | ||
414 | default: | ||
415 | QPRINTK(qdev, IFUP, CRIT, | ||
416 | "Address type %d not yet supported.\n", type); | ||
417 | status = -EPERM; | ||
418 | } | ||
419 | exit: | ||
420 | ql_sem_unlock(qdev, SEM_MAC_ADDR_MASK); | ||
421 | return status; | ||
422 | } | ||
423 | |||
424 | /* Get a specific frame routing value from the CAM. | ||
425 | * Used for debug and reg dump. | ||
426 | */ | ||
427 | int ql_get_routing_reg(struct ql_adapter *qdev, u32 index, u32 *value) | ||
428 | { | ||
429 | int status = 0; | ||
430 | |||
431 | status = ql_sem_spinlock(qdev, SEM_RT_IDX_MASK); | ||
432 | if (status) | ||
433 | goto exit; | ||
434 | |||
435 | status = ql_wait_reg_rdy(qdev, RT_IDX, RT_IDX_MW, RT_IDX_E); | ||
436 | if (status) | ||
437 | goto exit; | ||
438 | |||
439 | ql_write32(qdev, RT_IDX, | ||
440 | RT_IDX_TYPE_NICQ | RT_IDX_RS | (index << RT_IDX_IDX_SHIFT)); | ||
441 | status = ql_wait_reg_rdy(qdev, RT_IDX, RT_IDX_MR, RT_IDX_E); | ||
442 | if (status) | ||
443 | goto exit; | ||
444 | *value = ql_read32(qdev, RT_DATA); | ||
445 | exit: | ||
446 | ql_sem_unlock(qdev, SEM_RT_IDX_MASK); | ||
447 | return status; | ||
448 | } | ||
449 | |||
450 | /* The NIC function for this chip has 16 routing indexes. Each one can be used | ||
451 | * to route different frame types to various inbound queues. We send broadcast/ | ||
452 | * multicast/error frames to the default queue for slow handling, | ||
453 | * and CAM hit/RSS frames to the fast handling queues. | ||
454 | */ | ||
455 | static int ql_set_routing_reg(struct ql_adapter *qdev, u32 index, u32 mask, | ||
456 | int enable) | ||
457 | { | ||
458 | int status; | ||
459 | u32 value = 0; | ||
460 | |||
461 | status = ql_sem_spinlock(qdev, SEM_RT_IDX_MASK); | ||
462 | if (status) | ||
463 | return status; | ||
464 | |||
465 | QPRINTK(qdev, IFUP, DEBUG, | ||
466 | "%s %s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s mask %s the routing reg.\n", | ||
467 | (enable ? "Adding" : "Removing"), | ||
468 | ((index == RT_IDX_ALL_ERR_SLOT) ? "MAC ERROR/ALL ERROR" : ""), | ||
469 | ((index == RT_IDX_IP_CSUM_ERR_SLOT) ? "IP CSUM ERROR" : ""), | ||
470 | ((index == | ||
471 | RT_IDX_TCP_UDP_CSUM_ERR_SLOT) ? "TCP/UDP CSUM ERROR" : ""), | ||
472 | ((index == RT_IDX_BCAST_SLOT) ? "BROADCAST" : ""), | ||
473 | ((index == RT_IDX_MCAST_MATCH_SLOT) ? "MULTICAST MATCH" : ""), | ||
474 | ((index == RT_IDX_ALLMULTI_SLOT) ? "ALL MULTICAST MATCH" : ""), | ||
475 | ((index == RT_IDX_UNUSED6_SLOT) ? "UNUSED6" : ""), | ||
476 | ((index == RT_IDX_UNUSED7_SLOT) ? "UNUSED7" : ""), | ||
477 | ((index == RT_IDX_RSS_MATCH_SLOT) ? "RSS ALL/IPV4 MATCH" : ""), | ||
478 | ((index == RT_IDX_RSS_IPV6_SLOT) ? "RSS IPV6" : ""), | ||
479 | ((index == RT_IDX_RSS_TCP4_SLOT) ? "RSS TCP4" : ""), | ||
480 | ((index == RT_IDX_RSS_TCP6_SLOT) ? "RSS TCP6" : ""), | ||
481 | ((index == RT_IDX_CAM_HIT_SLOT) ? "CAM HIT" : ""), | ||
482 | ((index == RT_IDX_UNUSED013) ? "UNUSED13" : ""), | ||
483 | ((index == RT_IDX_UNUSED014) ? "UNUSED14" : ""), | ||
484 | ((index == RT_IDX_PROMISCUOUS_SLOT) ? "PROMISCUOUS" : ""), | ||
485 | (enable ? "to" : "from")); | ||
486 | |||
487 | switch (mask) { | ||
488 | case RT_IDX_CAM_HIT: | ||
489 | { | ||
490 | value = RT_IDX_DST_CAM_Q | /* dest */ | ||
491 | RT_IDX_TYPE_NICQ | /* type */ | ||
492 | (RT_IDX_CAM_HIT_SLOT << RT_IDX_IDX_SHIFT);/* index */ | ||
493 | break; | ||
494 | } | ||
495 | case RT_IDX_VALID: /* Promiscuous Mode frames. */ | ||
496 | { | ||
497 | value = RT_IDX_DST_DFLT_Q | /* dest */ | ||
498 | RT_IDX_TYPE_NICQ | /* type */ | ||
499 | (RT_IDX_PROMISCUOUS_SLOT << RT_IDX_IDX_SHIFT);/* index */ | ||
500 | break; | ||
501 | } | ||
502 | case RT_IDX_ERR: /* Pass up MAC,IP,TCP/UDP error frames. */ | ||
503 | { | ||
504 | value = RT_IDX_DST_DFLT_Q | /* dest */ | ||
505 | RT_IDX_TYPE_NICQ | /* type */ | ||
506 | (RT_IDX_ALL_ERR_SLOT << RT_IDX_IDX_SHIFT);/* index */ | ||
507 | break; | ||
508 | } | ||
509 | case RT_IDX_BCAST: /* Pass up Broadcast frames to default Q. */ | ||
510 | { | ||
511 | value = RT_IDX_DST_DFLT_Q | /* dest */ | ||
512 | RT_IDX_TYPE_NICQ | /* type */ | ||
513 | (RT_IDX_BCAST_SLOT << RT_IDX_IDX_SHIFT);/* index */ | ||
514 | break; | ||
515 | } | ||
516 | case RT_IDX_MCAST: /* Pass up All Multicast frames. */ | ||
517 | { | ||
518 | value = RT_IDX_DST_CAM_Q | /* dest */ | ||
519 | RT_IDX_TYPE_NICQ | /* type */ | ||
520 | (RT_IDX_ALLMULTI_SLOT << RT_IDX_IDX_SHIFT);/* index */ | ||
521 | break; | ||
522 | } | ||
523 | case RT_IDX_MCAST_MATCH: /* Pass up matched Multicast frames. */ | ||
524 | { | ||
525 | value = RT_IDX_DST_CAM_Q | /* dest */ | ||
526 | RT_IDX_TYPE_NICQ | /* type */ | ||
527 | (RT_IDX_MCAST_MATCH_SLOT << RT_IDX_IDX_SHIFT);/* index */ | ||
528 | break; | ||
529 | } | ||
530 | case RT_IDX_RSS_MATCH: /* Pass up matched RSS frames. */ | ||
531 | { | ||
532 | value = RT_IDX_DST_RSS | /* dest */ | ||
533 | RT_IDX_TYPE_NICQ | /* type */ | ||
534 | (RT_IDX_RSS_MATCH_SLOT << RT_IDX_IDX_SHIFT);/* index */ | ||
535 | break; | ||
536 | } | ||
537 | case 0: /* Clear the E-bit on an entry. */ | ||
538 | { | ||
539 | value = RT_IDX_DST_DFLT_Q | /* dest */ | ||
540 | RT_IDX_TYPE_NICQ | /* type */ | ||
541 | (index << RT_IDX_IDX_SHIFT);/* index */ | ||
542 | break; | ||
543 | } | ||
544 | default: | ||
545 | QPRINTK(qdev, IFUP, ERR, "Mask type %d not yet supported.\n", | ||
546 | mask); | ||
547 | status = -EPERM; | ||
548 | goto exit; | ||
549 | } | ||
550 | |||
551 | if (value) { | ||
552 | status = ql_wait_reg_rdy(qdev, RT_IDX, RT_IDX_MW, 0); | ||
553 | if (status) | ||
554 | goto exit; | ||
555 | value |= (enable ? RT_IDX_E : 0); | ||
556 | ql_write32(qdev, RT_IDX, value); | ||
557 | ql_write32(qdev, RT_DATA, enable ? mask : 0); | ||
558 | } | ||
559 | exit: | ||
560 | ql_sem_unlock(qdev, SEM_RT_IDX_MASK); | ||
561 | return status; | ||
562 | } | ||
563 | |||
564 | static void ql_enable_interrupts(struct ql_adapter *qdev) | ||
565 | { | ||
566 | ql_write32(qdev, INTR_EN, (INTR_EN_EI << 16) | INTR_EN_EI); | ||
567 | } | ||
568 | |||
569 | static void ql_disable_interrupts(struct ql_adapter *qdev) | ||
570 | { | ||
571 | ql_write32(qdev, INTR_EN, (INTR_EN_EI << 16)); | ||
572 | } | ||
573 | |||
574 | /* If we're running with multiple MSI-X vectors then we enable on the fly. | ||
575 | * Otherwise, we may have multiple outstanding workers and don't want to | ||
576 | * enable until the last one finishes. In this case, the irq_cnt gets | ||
577 | * incremented everytime we queue a worker and decremented everytime | ||
578 | * a worker finishes. Once it hits zero we enable the interrupt. | ||
579 | */ | ||
580 | void ql_enable_completion_interrupt(struct ql_adapter *qdev, u32 intr) | ||
581 | { | ||
582 | if (likely(test_bit(QL_MSIX_ENABLED, &qdev->flags))) | ||
583 | ql_write32(qdev, INTR_EN, | ||
584 | qdev->intr_context[intr].intr_en_mask); | ||
585 | else { | ||
586 | if (qdev->legacy_check) | ||
587 | spin_lock(&qdev->legacy_lock); | ||
588 | if (atomic_dec_and_test(&qdev->intr_context[intr].irq_cnt)) { | ||
589 | QPRINTK(qdev, INTR, ERR, "Enabling interrupt %d.\n", | ||
590 | intr); | ||
591 | ql_write32(qdev, INTR_EN, | ||
592 | qdev->intr_context[intr].intr_en_mask); | ||
593 | } else { | ||
594 | QPRINTK(qdev, INTR, ERR, | ||
595 | "Skip enable, other queue(s) are active.\n"); | ||
596 | } | ||
597 | if (qdev->legacy_check) | ||
598 | spin_unlock(&qdev->legacy_lock); | ||
599 | } | ||
600 | } | ||
601 | |||
602 | static u32 ql_disable_completion_interrupt(struct ql_adapter *qdev, u32 intr) | ||
603 | { | ||
604 | u32 var = 0; | ||
605 | |||
606 | if (likely(test_bit(QL_MSIX_ENABLED, &qdev->flags))) | ||
607 | goto exit; | ||
608 | else if (!atomic_read(&qdev->intr_context[intr].irq_cnt)) { | ||
609 | ql_write32(qdev, INTR_EN, | ||
610 | qdev->intr_context[intr].intr_dis_mask); | ||
611 | var = ql_read32(qdev, STS); | ||
612 | } | ||
613 | atomic_inc(&qdev->intr_context[intr].irq_cnt); | ||
614 | exit: | ||
615 | return var; | ||
616 | } | ||
617 | |||
618 | static void ql_enable_all_completion_interrupts(struct ql_adapter *qdev) | ||
619 | { | ||
620 | int i; | ||
621 | for (i = 0; i < qdev->intr_count; i++) { | ||
622 | /* The enable call does a atomic_dec_and_test | ||
623 | * and enables only if the result is zero. | ||
624 | * So we precharge it here. | ||
625 | */ | ||
626 | atomic_set(&qdev->intr_context[i].irq_cnt, 1); | ||
627 | ql_enable_completion_interrupt(qdev, i); | ||
628 | } | ||
629 | |||
630 | } | ||
631 | |||
632 | int ql_read_flash_word(struct ql_adapter *qdev, int offset, u32 *data) | ||
633 | { | ||
634 | int status = 0; | ||
635 | /* wait for reg to come ready */ | ||
636 | status = ql_wait_reg_rdy(qdev, | ||
637 | FLASH_ADDR, FLASH_ADDR_RDY, FLASH_ADDR_ERR); | ||
638 | if (status) | ||
639 | goto exit; | ||
640 | /* set up for reg read */ | ||
641 | ql_write32(qdev, FLASH_ADDR, FLASH_ADDR_R | offset); | ||
642 | /* wait for reg to come ready */ | ||
643 | status = ql_wait_reg_rdy(qdev, | ||
644 | FLASH_ADDR, FLASH_ADDR_RDY, FLASH_ADDR_ERR); | ||
645 | if (status) | ||
646 | goto exit; | ||
647 | /* get the data */ | ||
648 | *data = ql_read32(qdev, FLASH_DATA); | ||
649 | exit: | ||
650 | return status; | ||
651 | } | ||
652 | |||
653 | static int ql_get_flash_params(struct ql_adapter *qdev) | ||
654 | { | ||
655 | int i; | ||
656 | int status; | ||
657 | u32 *p = (u32 *)&qdev->flash; | ||
658 | |||
659 | if (ql_sem_spinlock(qdev, SEM_FLASH_MASK)) | ||
660 | return -ETIMEDOUT; | ||
661 | |||
662 | for (i = 0; i < sizeof(qdev->flash) / sizeof(u32); i++, p++) { | ||
663 | status = ql_read_flash_word(qdev, i, p); | ||
664 | if (status) { | ||
665 | QPRINTK(qdev, IFUP, ERR, "Error reading flash.\n"); | ||
666 | goto exit; | ||
667 | } | ||
668 | |||
669 | } | ||
670 | exit: | ||
671 | ql_sem_unlock(qdev, SEM_FLASH_MASK); | ||
672 | return status; | ||
673 | } | ||
674 | |||
675 | /* xgmac register are located behind the xgmac_addr and xgmac_data | ||
676 | * register pair. Each read/write requires us to wait for the ready | ||
677 | * bit before reading/writing the data. | ||
678 | */ | ||
679 | static int ql_write_xgmac_reg(struct ql_adapter *qdev, u32 reg, u32 data) | ||
680 | { | ||
681 | int status; | ||
682 | /* wait for reg to come ready */ | ||
683 | status = ql_wait_reg_rdy(qdev, | ||
684 | XGMAC_ADDR, XGMAC_ADDR_RDY, XGMAC_ADDR_XME); | ||
685 | if (status) | ||
686 | return status; | ||
687 | /* write the data to the data reg */ | ||
688 | ql_write32(qdev, XGMAC_DATA, data); | ||
689 | /* trigger the write */ | ||
690 | ql_write32(qdev, XGMAC_ADDR, reg); | ||
691 | return status; | ||
692 | } | ||
693 | |||
694 | /* xgmac register are located behind the xgmac_addr and xgmac_data | ||
695 | * register pair. Each read/write requires us to wait for the ready | ||
696 | * bit before reading/writing the data. | ||
697 | */ | ||
698 | int ql_read_xgmac_reg(struct ql_adapter *qdev, u32 reg, u32 *data) | ||
699 | { | ||
700 | int status = 0; | ||
701 | /* wait for reg to come ready */ | ||
702 | status = ql_wait_reg_rdy(qdev, | ||
703 | XGMAC_ADDR, XGMAC_ADDR_RDY, XGMAC_ADDR_XME); | ||
704 | if (status) | ||
705 | goto exit; | ||
706 | /* set up for reg read */ | ||
707 | ql_write32(qdev, XGMAC_ADDR, reg | XGMAC_ADDR_R); | ||
708 | /* wait for reg to come ready */ | ||
709 | status = ql_wait_reg_rdy(qdev, | ||
710 | XGMAC_ADDR, XGMAC_ADDR_RDY, XGMAC_ADDR_XME); | ||
711 | if (status) | ||
712 | goto exit; | ||
713 | /* get the data */ | ||
714 | *data = ql_read32(qdev, XGMAC_DATA); | ||
715 | exit: | ||
716 | return status; | ||
717 | } | ||
718 | |||
719 | /* This is used for reading the 64-bit statistics regs. */ | ||
720 | int ql_read_xgmac_reg64(struct ql_adapter *qdev, u32 reg, u64 *data) | ||
721 | { | ||
722 | int status = 0; | ||
723 | u32 hi = 0; | ||
724 | u32 lo = 0; | ||
725 | |||
726 | status = ql_read_xgmac_reg(qdev, reg, &lo); | ||
727 | if (status) | ||
728 | goto exit; | ||
729 | |||
730 | status = ql_read_xgmac_reg(qdev, reg + 4, &hi); | ||
731 | if (status) | ||
732 | goto exit; | ||
733 | |||
734 | *data = (u64) lo | ((u64) hi << 32); | ||
735 | |||
736 | exit: | ||
737 | return status; | ||
738 | } | ||
739 | |||
740 | /* Take the MAC Core out of reset. | ||
741 | * Enable statistics counting. | ||
742 | * Take the transmitter/receiver out of reset. | ||
743 | * This functionality may be done in the MPI firmware at a | ||
744 | * later date. | ||
745 | */ | ||
746 | static int ql_port_initialize(struct ql_adapter *qdev) | ||
747 | { | ||
748 | int status = 0; | ||
749 | u32 data; | ||
750 | |||
751 | if (ql_sem_trylock(qdev, qdev->xg_sem_mask)) { | ||
752 | /* Another function has the semaphore, so | ||
753 | * wait for the port init bit to come ready. | ||
754 | */ | ||
755 | QPRINTK(qdev, LINK, INFO, | ||
756 | "Another function has the semaphore, so wait for the port init bit to come ready.\n"); | ||
757 | status = ql_wait_reg_rdy(qdev, STS, qdev->port_init, 0); | ||
758 | if (status) { | ||
759 | QPRINTK(qdev, LINK, CRIT, | ||
760 | "Port initialize timed out.\n"); | ||
761 | } | ||
762 | return status; | ||
763 | } | ||
764 | |||
765 | QPRINTK(qdev, LINK, INFO, "Got xgmac semaphore!.\n"); | ||
766 | /* Set the core reset. */ | ||
767 | status = ql_read_xgmac_reg(qdev, GLOBAL_CFG, &data); | ||
768 | if (status) | ||
769 | goto end; | ||
770 | data |= GLOBAL_CFG_RESET; | ||
771 | status = ql_write_xgmac_reg(qdev, GLOBAL_CFG, data); | ||
772 | if (status) | ||
773 | goto end; | ||
774 | |||
775 | /* Clear the core reset and turn on jumbo for receiver. */ | ||
776 | data &= ~GLOBAL_CFG_RESET; /* Clear core reset. */ | ||
777 | data |= GLOBAL_CFG_JUMBO; /* Turn on jumbo. */ | ||
778 | data |= GLOBAL_CFG_TX_STAT_EN; | ||
779 | data |= GLOBAL_CFG_RX_STAT_EN; | ||
780 | status = ql_write_xgmac_reg(qdev, GLOBAL_CFG, data); | ||
781 | if (status) | ||
782 | goto end; | ||
783 | |||
784 | /* Enable transmitter, and clear it's reset. */ | ||
785 | status = ql_read_xgmac_reg(qdev, TX_CFG, &data); | ||
786 | if (status) | ||
787 | goto end; | ||
788 | data &= ~TX_CFG_RESET; /* Clear the TX MAC reset. */ | ||
789 | data |= TX_CFG_EN; /* Enable the transmitter. */ | ||
790 | status = ql_write_xgmac_reg(qdev, TX_CFG, data); | ||
791 | if (status) | ||
792 | goto end; | ||
793 | |||
794 | /* Enable receiver and clear it's reset. */ | ||
795 | status = ql_read_xgmac_reg(qdev, RX_CFG, &data); | ||
796 | if (status) | ||
797 | goto end; | ||
798 | data &= ~RX_CFG_RESET; /* Clear the RX MAC reset. */ | ||
799 | data |= RX_CFG_EN; /* Enable the receiver. */ | ||
800 | status = ql_write_xgmac_reg(qdev, RX_CFG, data); | ||
801 | if (status) | ||
802 | goto end; | ||
803 | |||
804 | /* Turn on jumbo. */ | ||
805 | status = | ||
806 | ql_write_xgmac_reg(qdev, MAC_TX_PARAMS, MAC_TX_PARAMS_JUMBO | (0x2580 << 16)); | ||
807 | if (status) | ||
808 | goto end; | ||
809 | status = | ||
810 | ql_write_xgmac_reg(qdev, MAC_RX_PARAMS, 0x2580); | ||
811 | if (status) | ||
812 | goto end; | ||
813 | |||
814 | /* Signal to the world that the port is enabled. */ | ||
815 | ql_write32(qdev, STS, ((qdev->port_init << 16) | qdev->port_init)); | ||
816 | end: | ||
817 | ql_sem_unlock(qdev, qdev->xg_sem_mask); | ||
818 | return status; | ||
819 | } | ||
820 | |||
821 | /* Get the next large buffer. */ | ||
822 | struct bq_desc *ql_get_curr_lbuf(struct rx_ring *rx_ring) | ||
823 | { | ||
824 | struct bq_desc *lbq_desc = &rx_ring->lbq[rx_ring->lbq_curr_idx]; | ||
825 | rx_ring->lbq_curr_idx++; | ||
826 | if (rx_ring->lbq_curr_idx == rx_ring->lbq_len) | ||
827 | rx_ring->lbq_curr_idx = 0; | ||
828 | rx_ring->lbq_free_cnt++; | ||
829 | return lbq_desc; | ||
830 | } | ||
831 | |||
832 | /* Get the next small buffer. */ | ||
833 | struct bq_desc *ql_get_curr_sbuf(struct rx_ring *rx_ring) | ||
834 | { | ||
835 | struct bq_desc *sbq_desc = &rx_ring->sbq[rx_ring->sbq_curr_idx]; | ||
836 | rx_ring->sbq_curr_idx++; | ||
837 | if (rx_ring->sbq_curr_idx == rx_ring->sbq_len) | ||
838 | rx_ring->sbq_curr_idx = 0; | ||
839 | rx_ring->sbq_free_cnt++; | ||
840 | return sbq_desc; | ||
841 | } | ||
842 | |||
843 | /* Update an rx ring index. */ | ||
844 | static void ql_update_cq(struct rx_ring *rx_ring) | ||
845 | { | ||
846 | rx_ring->cnsmr_idx++; | ||
847 | rx_ring->curr_entry++; | ||
848 | if (unlikely(rx_ring->cnsmr_idx == rx_ring->cq_len)) { | ||
849 | rx_ring->cnsmr_idx = 0; | ||
850 | rx_ring->curr_entry = rx_ring->cq_base; | ||
851 | } | ||
852 | } | ||
853 | |||
854 | static void ql_write_cq_idx(struct rx_ring *rx_ring) | ||
855 | { | ||
856 | ql_write_db_reg(rx_ring->cnsmr_idx, rx_ring->cnsmr_idx_db_reg); | ||
857 | } | ||
858 | |||
859 | /* Process (refill) a large buffer queue. */ | ||
860 | static void ql_update_lbq(struct ql_adapter *qdev, struct rx_ring *rx_ring) | ||
861 | { | ||
862 | int clean_idx = rx_ring->lbq_clean_idx; | ||
863 | struct bq_desc *lbq_desc; | ||
864 | struct bq_element *bq; | ||
865 | u64 map; | ||
866 | int i; | ||
867 | |||
868 | while (rx_ring->lbq_free_cnt > 16) { | ||
869 | for (i = 0; i < 16; i++) { | ||
870 | QPRINTK(qdev, RX_STATUS, DEBUG, | ||
871 | "lbq: try cleaning clean_idx = %d.\n", | ||
872 | clean_idx); | ||
873 | lbq_desc = &rx_ring->lbq[clean_idx]; | ||
874 | bq = lbq_desc->bq; | ||
875 | if (lbq_desc->p.lbq_page == NULL) { | ||
876 | QPRINTK(qdev, RX_STATUS, DEBUG, | ||
877 | "lbq: getting new page for index %d.\n", | ||
878 | lbq_desc->index); | ||
879 | lbq_desc->p.lbq_page = alloc_page(GFP_ATOMIC); | ||
880 | if (lbq_desc->p.lbq_page == NULL) { | ||
881 | QPRINTK(qdev, RX_STATUS, ERR, | ||
882 | "Couldn't get a page.\n"); | ||
883 | return; | ||
884 | } | ||
885 | map = pci_map_page(qdev->pdev, | ||
886 | lbq_desc->p.lbq_page, | ||
887 | 0, PAGE_SIZE, | ||
888 | PCI_DMA_FROMDEVICE); | ||
889 | if (pci_dma_mapping_error(qdev->pdev, map)) { | ||
890 | QPRINTK(qdev, RX_STATUS, ERR, | ||
891 | "PCI mapping failed.\n"); | ||
892 | return; | ||
893 | } | ||
894 | pci_unmap_addr_set(lbq_desc, mapaddr, map); | ||
895 | pci_unmap_len_set(lbq_desc, maplen, PAGE_SIZE); | ||
896 | bq->addr_lo = /*lbq_desc->addr_lo = */ | ||
897 | cpu_to_le32(map); | ||
898 | bq->addr_hi = /*lbq_desc->addr_hi = */ | ||
899 | cpu_to_le32(map >> 32); | ||
900 | } | ||
901 | clean_idx++; | ||
902 | if (clean_idx == rx_ring->lbq_len) | ||
903 | clean_idx = 0; | ||
904 | } | ||
905 | |||
906 | rx_ring->lbq_clean_idx = clean_idx; | ||
907 | rx_ring->lbq_prod_idx += 16; | ||
908 | if (rx_ring->lbq_prod_idx == rx_ring->lbq_len) | ||
909 | rx_ring->lbq_prod_idx = 0; | ||
910 | QPRINTK(qdev, RX_STATUS, DEBUG, | ||
911 | "lbq: updating prod idx = %d.\n", | ||
912 | rx_ring->lbq_prod_idx); | ||
913 | ql_write_db_reg(rx_ring->lbq_prod_idx, | ||
914 | rx_ring->lbq_prod_idx_db_reg); | ||
915 | rx_ring->lbq_free_cnt -= 16; | ||
916 | } | ||
917 | } | ||
918 | |||
919 | /* Process (refill) a small buffer queue. */ | ||
920 | static void ql_update_sbq(struct ql_adapter *qdev, struct rx_ring *rx_ring) | ||
921 | { | ||
922 | int clean_idx = rx_ring->sbq_clean_idx; | ||
923 | struct bq_desc *sbq_desc; | ||
924 | struct bq_element *bq; | ||
925 | u64 map; | ||
926 | int i; | ||
927 | |||
928 | while (rx_ring->sbq_free_cnt > 16) { | ||
929 | for (i = 0; i < 16; i++) { | ||
930 | sbq_desc = &rx_ring->sbq[clean_idx]; | ||
931 | QPRINTK(qdev, RX_STATUS, DEBUG, | ||
932 | "sbq: try cleaning clean_idx = %d.\n", | ||
933 | clean_idx); | ||
934 | bq = sbq_desc->bq; | ||
935 | if (sbq_desc->p.skb == NULL) { | ||
936 | QPRINTK(qdev, RX_STATUS, DEBUG, | ||
937 | "sbq: getting new skb for index %d.\n", | ||
938 | sbq_desc->index); | ||
939 | sbq_desc->p.skb = | ||
940 | netdev_alloc_skb(qdev->ndev, | ||
941 | rx_ring->sbq_buf_size); | ||
942 | if (sbq_desc->p.skb == NULL) { | ||
943 | QPRINTK(qdev, PROBE, ERR, | ||
944 | "Couldn't get an skb.\n"); | ||
945 | rx_ring->sbq_clean_idx = clean_idx; | ||
946 | return; | ||
947 | } | ||
948 | skb_reserve(sbq_desc->p.skb, QLGE_SB_PAD); | ||
949 | map = pci_map_single(qdev->pdev, | ||
950 | sbq_desc->p.skb->data, | ||
951 | rx_ring->sbq_buf_size / | ||
952 | 2, PCI_DMA_FROMDEVICE); | ||
953 | pci_unmap_addr_set(sbq_desc, mapaddr, map); | ||
954 | pci_unmap_len_set(sbq_desc, maplen, | ||
955 | rx_ring->sbq_buf_size / 2); | ||
956 | bq->addr_lo = cpu_to_le32(map); | ||
957 | bq->addr_hi = cpu_to_le32(map >> 32); | ||
958 | } | ||
959 | |||
960 | clean_idx++; | ||
961 | if (clean_idx == rx_ring->sbq_len) | ||
962 | clean_idx = 0; | ||
963 | } | ||
964 | rx_ring->sbq_clean_idx = clean_idx; | ||
965 | rx_ring->sbq_prod_idx += 16; | ||
966 | if (rx_ring->sbq_prod_idx == rx_ring->sbq_len) | ||
967 | rx_ring->sbq_prod_idx = 0; | ||
968 | QPRINTK(qdev, RX_STATUS, DEBUG, | ||
969 | "sbq: updating prod idx = %d.\n", | ||
970 | rx_ring->sbq_prod_idx); | ||
971 | ql_write_db_reg(rx_ring->sbq_prod_idx, | ||
972 | rx_ring->sbq_prod_idx_db_reg); | ||
973 | |||
974 | rx_ring->sbq_free_cnt -= 16; | ||
975 | } | ||
976 | } | ||
977 | |||
978 | static void ql_update_buffer_queues(struct ql_adapter *qdev, | ||
979 | struct rx_ring *rx_ring) | ||
980 | { | ||
981 | ql_update_sbq(qdev, rx_ring); | ||
982 | ql_update_lbq(qdev, rx_ring); | ||
983 | } | ||
984 | |||
985 | /* Unmaps tx buffers. Can be called from send() if a pci mapping | ||
986 | * fails at some stage, or from the interrupt when a tx completes. | ||
987 | */ | ||
988 | static void ql_unmap_send(struct ql_adapter *qdev, | ||
989 | struct tx_ring_desc *tx_ring_desc, int mapped) | ||
990 | { | ||
991 | int i; | ||
992 | for (i = 0; i < mapped; i++) { | ||
993 | if (i == 0 || (i == 7 && mapped > 7)) { | ||
994 | /* | ||
995 | * Unmap the skb->data area, or the | ||
996 | * external sglist (AKA the Outbound | ||
997 | * Address List (OAL)). | ||
998 | * If its the zeroeth element, then it's | ||
999 | * the skb->data area. If it's the 7th | ||
1000 | * element and there is more than 6 frags, | ||
1001 | * then its an OAL. | ||
1002 | */ | ||
1003 | if (i == 7) { | ||
1004 | QPRINTK(qdev, TX_DONE, DEBUG, | ||
1005 | "unmapping OAL area.\n"); | ||
1006 | } | ||
1007 | pci_unmap_single(qdev->pdev, | ||
1008 | pci_unmap_addr(&tx_ring_desc->map[i], | ||
1009 | mapaddr), | ||
1010 | pci_unmap_len(&tx_ring_desc->map[i], | ||
1011 | maplen), | ||
1012 | PCI_DMA_TODEVICE); | ||
1013 | } else { | ||
1014 | QPRINTK(qdev, TX_DONE, DEBUG, "unmapping frag %d.\n", | ||
1015 | i); | ||
1016 | pci_unmap_page(qdev->pdev, | ||
1017 | pci_unmap_addr(&tx_ring_desc->map[i], | ||
1018 | mapaddr), | ||
1019 | pci_unmap_len(&tx_ring_desc->map[i], | ||
1020 | maplen), PCI_DMA_TODEVICE); | ||
1021 | } | ||
1022 | } | ||
1023 | |||
1024 | } | ||
1025 | |||
1026 | /* Map the buffers for this transmit. This will return | ||
1027 | * NETDEV_TX_BUSY or NETDEV_TX_OK based on success. | ||
1028 | */ | ||
1029 | static int ql_map_send(struct ql_adapter *qdev, | ||
1030 | struct ob_mac_iocb_req *mac_iocb_ptr, | ||
1031 | struct sk_buff *skb, struct tx_ring_desc *tx_ring_desc) | ||
1032 | { | ||
1033 | int len = skb_headlen(skb); | ||
1034 | dma_addr_t map; | ||
1035 | int frag_idx, err, map_idx = 0; | ||
1036 | struct tx_buf_desc *tbd = mac_iocb_ptr->tbd; | ||
1037 | int frag_cnt = skb_shinfo(skb)->nr_frags; | ||
1038 | |||
1039 | if (frag_cnt) { | ||
1040 | QPRINTK(qdev, TX_QUEUED, DEBUG, "frag_cnt = %d.\n", frag_cnt); | ||
1041 | } | ||
1042 | /* | ||
1043 | * Map the skb buffer first. | ||
1044 | */ | ||
1045 | map = pci_map_single(qdev->pdev, skb->data, len, PCI_DMA_TODEVICE); | ||
1046 | |||
1047 | err = pci_dma_mapping_error(qdev->pdev, map); | ||
1048 | if (err) { | ||
1049 | QPRINTK(qdev, TX_QUEUED, ERR, | ||
1050 | "PCI mapping failed with error: %d\n", err); | ||
1051 | |||
1052 | return NETDEV_TX_BUSY; | ||
1053 | } | ||
1054 | |||
1055 | tbd->len = cpu_to_le32(len); | ||
1056 | tbd->addr = cpu_to_le64(map); | ||
1057 | pci_unmap_addr_set(&tx_ring_desc->map[map_idx], mapaddr, map); | ||
1058 | pci_unmap_len_set(&tx_ring_desc->map[map_idx], maplen, len); | ||
1059 | map_idx++; | ||
1060 | |||
1061 | /* | ||
1062 | * This loop fills the remainder of the 8 address descriptors | ||
1063 | * in the IOCB. If there are more than 7 fragments, then the | ||
1064 | * eighth address desc will point to an external list (OAL). | ||
1065 | * When this happens, the remainder of the frags will be stored | ||
1066 | * in this list. | ||
1067 | */ | ||
1068 | for (frag_idx = 0; frag_idx < frag_cnt; frag_idx++, map_idx++) { | ||
1069 | skb_frag_t *frag = &skb_shinfo(skb)->frags[frag_idx]; | ||
1070 | tbd++; | ||
1071 | if (frag_idx == 6 && frag_cnt > 7) { | ||
1072 | /* Let's tack on an sglist. | ||
1073 | * Our control block will now | ||
1074 | * look like this: | ||
1075 | * iocb->seg[0] = skb->data | ||
1076 | * iocb->seg[1] = frag[0] | ||
1077 | * iocb->seg[2] = frag[1] | ||
1078 | * iocb->seg[3] = frag[2] | ||
1079 | * iocb->seg[4] = frag[3] | ||
1080 | * iocb->seg[5] = frag[4] | ||
1081 | * iocb->seg[6] = frag[5] | ||
1082 | * iocb->seg[7] = ptr to OAL (external sglist) | ||
1083 | * oal->seg[0] = frag[6] | ||
1084 | * oal->seg[1] = frag[7] | ||
1085 | * oal->seg[2] = frag[8] | ||
1086 | * oal->seg[3] = frag[9] | ||
1087 | * oal->seg[4] = frag[10] | ||
1088 | * etc... | ||
1089 | */ | ||
1090 | /* Tack on the OAL in the eighth segment of IOCB. */ | ||
1091 | map = pci_map_single(qdev->pdev, &tx_ring_desc->oal, | ||
1092 | sizeof(struct oal), | ||
1093 | PCI_DMA_TODEVICE); | ||
1094 | err = pci_dma_mapping_error(qdev->pdev, map); | ||
1095 | if (err) { | ||
1096 | QPRINTK(qdev, TX_QUEUED, ERR, | ||
1097 | "PCI mapping outbound address list with error: %d\n", | ||
1098 | err); | ||
1099 | goto map_error; | ||
1100 | } | ||
1101 | |||
1102 | tbd->addr = cpu_to_le64(map); | ||
1103 | /* | ||
1104 | * The length is the number of fragments | ||
1105 | * that remain to be mapped times the length | ||
1106 | * of our sglist (OAL). | ||
1107 | */ | ||
1108 | tbd->len = | ||
1109 | cpu_to_le32((sizeof(struct tx_buf_desc) * | ||
1110 | (frag_cnt - frag_idx)) | TX_DESC_C); | ||
1111 | pci_unmap_addr_set(&tx_ring_desc->map[map_idx], mapaddr, | ||
1112 | map); | ||
1113 | pci_unmap_len_set(&tx_ring_desc->map[map_idx], maplen, | ||
1114 | sizeof(struct oal)); | ||
1115 | tbd = (struct tx_buf_desc *)&tx_ring_desc->oal; | ||
1116 | map_idx++; | ||
1117 | } | ||
1118 | |||
1119 | map = | ||
1120 | pci_map_page(qdev->pdev, frag->page, | ||
1121 | frag->page_offset, frag->size, | ||
1122 | PCI_DMA_TODEVICE); | ||
1123 | |||
1124 | err = pci_dma_mapping_error(qdev->pdev, map); | ||
1125 | if (err) { | ||
1126 | QPRINTK(qdev, TX_QUEUED, ERR, | ||
1127 | "PCI mapping frags failed with error: %d.\n", | ||
1128 | err); | ||
1129 | goto map_error; | ||
1130 | } | ||
1131 | |||
1132 | tbd->addr = cpu_to_le64(map); | ||
1133 | tbd->len = cpu_to_le32(frag->size); | ||
1134 | pci_unmap_addr_set(&tx_ring_desc->map[map_idx], mapaddr, map); | ||
1135 | pci_unmap_len_set(&tx_ring_desc->map[map_idx], maplen, | ||
1136 | frag->size); | ||
1137 | |||
1138 | } | ||
1139 | /* Save the number of segments we've mapped. */ | ||
1140 | tx_ring_desc->map_cnt = map_idx; | ||
1141 | /* Terminate the last segment. */ | ||
1142 | tbd->len = cpu_to_le32(le32_to_cpu(tbd->len) | TX_DESC_E); | ||
1143 | return NETDEV_TX_OK; | ||
1144 | |||
1145 | map_error: | ||
1146 | /* | ||
1147 | * If the first frag mapping failed, then i will be zero. | ||
1148 | * This causes the unmap of the skb->data area. Otherwise | ||
1149 | * we pass in the number of frags that mapped successfully | ||
1150 | * so they can be umapped. | ||
1151 | */ | ||
1152 | ql_unmap_send(qdev, tx_ring_desc, map_idx); | ||
1153 | return NETDEV_TX_BUSY; | ||
1154 | } | ||
1155 | |||
1156 | void ql_realign_skb(struct sk_buff *skb, int len) | ||
1157 | { | ||
1158 | void *temp_addr = skb->data; | ||
1159 | |||
1160 | /* Undo the skb_reserve(skb,32) we did before | ||
1161 | * giving to hardware, and realign data on | ||
1162 | * a 2-byte boundary. | ||
1163 | */ | ||
1164 | skb->data -= QLGE_SB_PAD - NET_IP_ALIGN; | ||
1165 | skb->tail -= QLGE_SB_PAD - NET_IP_ALIGN; | ||
1166 | skb_copy_to_linear_data(skb, temp_addr, | ||
1167 | (unsigned int)len); | ||
1168 | } | ||
1169 | |||
1170 | /* | ||
1171 | * This function builds an skb for the given inbound | ||
1172 | * completion. It will be rewritten for readability in the near | ||
1173 | * future, but for not it works well. | ||
1174 | */ | ||
1175 | static struct sk_buff *ql_build_rx_skb(struct ql_adapter *qdev, | ||
1176 | struct rx_ring *rx_ring, | ||
1177 | struct ib_mac_iocb_rsp *ib_mac_rsp) | ||
1178 | { | ||
1179 | struct bq_desc *lbq_desc; | ||
1180 | struct bq_desc *sbq_desc; | ||
1181 | struct sk_buff *skb = NULL; | ||
1182 | u32 length = le32_to_cpu(ib_mac_rsp->data_len); | ||
1183 | u32 hdr_len = le32_to_cpu(ib_mac_rsp->hdr_len); | ||
1184 | |||
1185 | /* | ||
1186 | * Handle the header buffer if present. | ||
1187 | */ | ||
1188 | if (ib_mac_rsp->flags4 & IB_MAC_IOCB_RSP_HV && | ||
1189 | ib_mac_rsp->flags4 & IB_MAC_IOCB_RSP_HS) { | ||
1190 | QPRINTK(qdev, RX_STATUS, DEBUG, "Header of %d bytes in small buffer.\n", hdr_len); | ||
1191 | /* | ||
1192 | * Headers fit nicely into a small buffer. | ||
1193 | */ | ||
1194 | sbq_desc = ql_get_curr_sbuf(rx_ring); | ||
1195 | pci_unmap_single(qdev->pdev, | ||
1196 | pci_unmap_addr(sbq_desc, mapaddr), | ||
1197 | pci_unmap_len(sbq_desc, maplen), | ||
1198 | PCI_DMA_FROMDEVICE); | ||
1199 | skb = sbq_desc->p.skb; | ||
1200 | ql_realign_skb(skb, hdr_len); | ||
1201 | skb_put(skb, hdr_len); | ||
1202 | sbq_desc->p.skb = NULL; | ||
1203 | } | ||
1204 | |||
1205 | /* | ||
1206 | * Handle the data buffer(s). | ||
1207 | */ | ||
1208 | if (unlikely(!length)) { /* Is there data too? */ | ||
1209 | QPRINTK(qdev, RX_STATUS, DEBUG, | ||
1210 | "No Data buffer in this packet.\n"); | ||
1211 | return skb; | ||
1212 | } | ||
1213 | |||
1214 | if (ib_mac_rsp->flags3 & IB_MAC_IOCB_RSP_DS) { | ||
1215 | if (ib_mac_rsp->flags4 & IB_MAC_IOCB_RSP_HS) { | ||
1216 | QPRINTK(qdev, RX_STATUS, DEBUG, | ||
1217 | "Headers in small, data of %d bytes in small, combine them.\n", length); | ||
1218 | /* | ||
1219 | * Data is less than small buffer size so it's | ||
1220 | * stuffed in a small buffer. | ||
1221 | * For this case we append the data | ||
1222 | * from the "data" small buffer to the "header" small | ||
1223 | * buffer. | ||
1224 | */ | ||
1225 | sbq_desc = ql_get_curr_sbuf(rx_ring); | ||
1226 | pci_dma_sync_single_for_cpu(qdev->pdev, | ||
1227 | pci_unmap_addr | ||
1228 | (sbq_desc, mapaddr), | ||
1229 | pci_unmap_len | ||
1230 | (sbq_desc, maplen), | ||
1231 | PCI_DMA_FROMDEVICE); | ||
1232 | memcpy(skb_put(skb, length), | ||
1233 | sbq_desc->p.skb->data, length); | ||
1234 | pci_dma_sync_single_for_device(qdev->pdev, | ||
1235 | pci_unmap_addr | ||
1236 | (sbq_desc, | ||
1237 | mapaddr), | ||
1238 | pci_unmap_len | ||
1239 | (sbq_desc, | ||
1240 | maplen), | ||
1241 | PCI_DMA_FROMDEVICE); | ||
1242 | } else { | ||
1243 | QPRINTK(qdev, RX_STATUS, DEBUG, | ||
1244 | "%d bytes in a single small buffer.\n", length); | ||
1245 | sbq_desc = ql_get_curr_sbuf(rx_ring); | ||
1246 | skb = sbq_desc->p.skb; | ||
1247 | ql_realign_skb(skb, length); | ||
1248 | skb_put(skb, length); | ||
1249 | pci_unmap_single(qdev->pdev, | ||
1250 | pci_unmap_addr(sbq_desc, | ||
1251 | mapaddr), | ||
1252 | pci_unmap_len(sbq_desc, | ||
1253 | maplen), | ||
1254 | PCI_DMA_FROMDEVICE); | ||
1255 | sbq_desc->p.skb = NULL; | ||
1256 | } | ||
1257 | } else if (ib_mac_rsp->flags3 & IB_MAC_IOCB_RSP_DL) { | ||
1258 | if (ib_mac_rsp->flags4 & IB_MAC_IOCB_RSP_HS) { | ||
1259 | QPRINTK(qdev, RX_STATUS, DEBUG, | ||
1260 | "Header in small, %d bytes in large. Chain large to small!\n", length); | ||
1261 | /* | ||
1262 | * The data is in a single large buffer. We | ||
1263 | * chain it to the header buffer's skb and let | ||
1264 | * it rip. | ||
1265 | */ | ||
1266 | lbq_desc = ql_get_curr_lbuf(rx_ring); | ||
1267 | pci_unmap_page(qdev->pdev, | ||
1268 | pci_unmap_addr(lbq_desc, | ||
1269 | mapaddr), | ||
1270 | pci_unmap_len(lbq_desc, maplen), | ||
1271 | PCI_DMA_FROMDEVICE); | ||
1272 | QPRINTK(qdev, RX_STATUS, DEBUG, | ||
1273 | "Chaining page to skb.\n"); | ||
1274 | skb_fill_page_desc(skb, 0, lbq_desc->p.lbq_page, | ||
1275 | 0, length); | ||
1276 | skb->len += length; | ||
1277 | skb->data_len += length; | ||
1278 | skb->truesize += length; | ||
1279 | lbq_desc->p.lbq_page = NULL; | ||
1280 | } else { | ||
1281 | /* | ||
1282 | * The headers and data are in a single large buffer. We | ||
1283 | * copy it to a new skb and let it go. This can happen with | ||
1284 | * jumbo mtu on a non-TCP/UDP frame. | ||
1285 | */ | ||
1286 | lbq_desc = ql_get_curr_lbuf(rx_ring); | ||
1287 | skb = netdev_alloc_skb(qdev->ndev, length); | ||
1288 | if (skb == NULL) { | ||
1289 | QPRINTK(qdev, PROBE, DEBUG, | ||
1290 | "No skb available, drop the packet.\n"); | ||
1291 | return NULL; | ||
1292 | } | ||
1293 | skb_reserve(skb, NET_IP_ALIGN); | ||
1294 | QPRINTK(qdev, RX_STATUS, DEBUG, | ||
1295 | "%d bytes of headers and data in large. Chain page to new skb and pull tail.\n", length); | ||
1296 | skb_fill_page_desc(skb, 0, lbq_desc->p.lbq_page, | ||
1297 | 0, length); | ||
1298 | skb->len += length; | ||
1299 | skb->data_len += length; | ||
1300 | skb->truesize += length; | ||
1301 | length -= length; | ||
1302 | lbq_desc->p.lbq_page = NULL; | ||
1303 | __pskb_pull_tail(skb, | ||
1304 | (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_V) ? | ||
1305 | VLAN_ETH_HLEN : ETH_HLEN); | ||
1306 | } | ||
1307 | } else { | ||
1308 | /* | ||
1309 | * The data is in a chain of large buffers | ||
1310 | * pointed to by a small buffer. We loop | ||
1311 | * thru and chain them to the our small header | ||
1312 | * buffer's skb. | ||
1313 | * frags: There are 18 max frags and our small | ||
1314 | * buffer will hold 32 of them. The thing is, | ||
1315 | * we'll use 3 max for our 9000 byte jumbo | ||
1316 | * frames. If the MTU goes up we could | ||
1317 | * eventually be in trouble. | ||
1318 | */ | ||
1319 | int size, offset, i = 0; | ||
1320 | struct bq_element *bq, bq_array[8]; | ||
1321 | sbq_desc = ql_get_curr_sbuf(rx_ring); | ||
1322 | pci_unmap_single(qdev->pdev, | ||
1323 | pci_unmap_addr(sbq_desc, mapaddr), | ||
1324 | pci_unmap_len(sbq_desc, maplen), | ||
1325 | PCI_DMA_FROMDEVICE); | ||
1326 | if (!(ib_mac_rsp->flags4 & IB_MAC_IOCB_RSP_HS)) { | ||
1327 | /* | ||
1328 | * This is an non TCP/UDP IP frame, so | ||
1329 | * the headers aren't split into a small | ||
1330 | * buffer. We have to use the small buffer | ||
1331 | * that contains our sg list as our skb to | ||
1332 | * send upstairs. Copy the sg list here to | ||
1333 | * a local buffer and use it to find the | ||
1334 | * pages to chain. | ||
1335 | */ | ||
1336 | QPRINTK(qdev, RX_STATUS, DEBUG, | ||
1337 | "%d bytes of headers & data in chain of large.\n", length); | ||
1338 | skb = sbq_desc->p.skb; | ||
1339 | bq = &bq_array[0]; | ||
1340 | memcpy(bq, skb->data, sizeof(bq_array)); | ||
1341 | sbq_desc->p.skb = NULL; | ||
1342 | skb_reserve(skb, NET_IP_ALIGN); | ||
1343 | } else { | ||
1344 | QPRINTK(qdev, RX_STATUS, DEBUG, | ||
1345 | "Headers in small, %d bytes of data in chain of large.\n", length); | ||
1346 | bq = (struct bq_element *)sbq_desc->p.skb->data; | ||
1347 | } | ||
1348 | while (length > 0) { | ||
1349 | lbq_desc = ql_get_curr_lbuf(rx_ring); | ||
1350 | if ((bq->addr_lo & ~BQ_MASK) != lbq_desc->bq->addr_lo) { | ||
1351 | QPRINTK(qdev, RX_STATUS, ERR, | ||
1352 | "Panic!!! bad large buffer address, expected 0x%.08x, got 0x%.08x.\n", | ||
1353 | lbq_desc->bq->addr_lo, bq->addr_lo); | ||
1354 | return NULL; | ||
1355 | } | ||
1356 | pci_unmap_page(qdev->pdev, | ||
1357 | pci_unmap_addr(lbq_desc, | ||
1358 | mapaddr), | ||
1359 | pci_unmap_len(lbq_desc, | ||
1360 | maplen), | ||
1361 | PCI_DMA_FROMDEVICE); | ||
1362 | size = (length < PAGE_SIZE) ? length : PAGE_SIZE; | ||
1363 | offset = 0; | ||
1364 | |||
1365 | QPRINTK(qdev, RX_STATUS, DEBUG, | ||
1366 | "Adding page %d to skb for %d bytes.\n", | ||
1367 | i, size); | ||
1368 | skb_fill_page_desc(skb, i, lbq_desc->p.lbq_page, | ||
1369 | offset, size); | ||
1370 | skb->len += size; | ||
1371 | skb->data_len += size; | ||
1372 | skb->truesize += size; | ||
1373 | length -= size; | ||
1374 | lbq_desc->p.lbq_page = NULL; | ||
1375 | bq++; | ||
1376 | i++; | ||
1377 | } | ||
1378 | __pskb_pull_tail(skb, (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_V) ? | ||
1379 | VLAN_ETH_HLEN : ETH_HLEN); | ||
1380 | } | ||
1381 | return skb; | ||
1382 | } | ||
1383 | |||
1384 | /* Process an inbound completion from an rx ring. */ | ||
1385 | static void ql_process_mac_rx_intr(struct ql_adapter *qdev, | ||
1386 | struct rx_ring *rx_ring, | ||
1387 | struct ib_mac_iocb_rsp *ib_mac_rsp) | ||
1388 | { | ||
1389 | struct net_device *ndev = qdev->ndev; | ||
1390 | struct sk_buff *skb = NULL; | ||
1391 | |||
1392 | QL_DUMP_IB_MAC_RSP(ib_mac_rsp); | ||
1393 | |||
1394 | skb = ql_build_rx_skb(qdev, rx_ring, ib_mac_rsp); | ||
1395 | if (unlikely(!skb)) { | ||
1396 | QPRINTK(qdev, RX_STATUS, DEBUG, | ||
1397 | "No skb available, drop packet.\n"); | ||
1398 | return; | ||
1399 | } | ||
1400 | |||
1401 | prefetch(skb->data); | ||
1402 | skb->dev = ndev; | ||
1403 | if (ib_mac_rsp->flags1 & IB_MAC_IOCB_RSP_M_MASK) { | ||
1404 | QPRINTK(qdev, RX_STATUS, DEBUG, "%s%s%s Multicast.\n", | ||
1405 | (ib_mac_rsp->flags1 & IB_MAC_IOCB_RSP_M_MASK) == | ||
1406 | IB_MAC_IOCB_RSP_M_HASH ? "Hash" : "", | ||
1407 | (ib_mac_rsp->flags1 & IB_MAC_IOCB_RSP_M_MASK) == | ||
1408 | IB_MAC_IOCB_RSP_M_REG ? "Registered" : "", | ||
1409 | (ib_mac_rsp->flags1 & IB_MAC_IOCB_RSP_M_MASK) == | ||
1410 | IB_MAC_IOCB_RSP_M_PROM ? "Promiscuous" : ""); | ||
1411 | } | ||
1412 | if (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_P) { | ||
1413 | QPRINTK(qdev, RX_STATUS, DEBUG, "Promiscuous Packet.\n"); | ||
1414 | } | ||
1415 | if (ib_mac_rsp->flags1 & (IB_MAC_IOCB_RSP_IE | IB_MAC_IOCB_RSP_TE)) { | ||
1416 | QPRINTK(qdev, RX_STATUS, ERR, | ||
1417 | "Bad checksum for this %s packet.\n", | ||
1418 | ((ib_mac_rsp-> | ||
1419 | flags2 & IB_MAC_IOCB_RSP_T) ? "TCP" : "UDP")); | ||
1420 | skb->ip_summed = CHECKSUM_NONE; | ||
1421 | } else if (qdev->rx_csum && | ||
1422 | ((ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_T) || | ||
1423 | ((ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_U) && | ||
1424 | !(ib_mac_rsp->flags1 & IB_MAC_IOCB_RSP_NU)))) { | ||
1425 | QPRINTK(qdev, RX_STATUS, DEBUG, "RX checksum done!\n"); | ||
1426 | skb->ip_summed = CHECKSUM_UNNECESSARY; | ||
1427 | } | ||
1428 | qdev->stats.rx_packets++; | ||
1429 | qdev->stats.rx_bytes += skb->len; | ||
1430 | skb->protocol = eth_type_trans(skb, ndev); | ||
1431 | if (qdev->vlgrp && (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_V)) { | ||
1432 | QPRINTK(qdev, RX_STATUS, DEBUG, | ||
1433 | "Passing a VLAN packet upstream.\n"); | ||
1434 | vlan_hwaccel_rx(skb, qdev->vlgrp, | ||
1435 | le16_to_cpu(ib_mac_rsp->vlan_id)); | ||
1436 | } else { | ||
1437 | QPRINTK(qdev, RX_STATUS, DEBUG, | ||
1438 | "Passing a normal packet upstream.\n"); | ||
1439 | netif_rx(skb); | ||
1440 | } | ||
1441 | ndev->last_rx = jiffies; | ||
1442 | } | ||
1443 | |||
1444 | /* Process an outbound completion from an rx ring. */ | ||
1445 | static void ql_process_mac_tx_intr(struct ql_adapter *qdev, | ||
1446 | struct ob_mac_iocb_rsp *mac_rsp) | ||
1447 | { | ||
1448 | struct tx_ring *tx_ring; | ||
1449 | struct tx_ring_desc *tx_ring_desc; | ||
1450 | |||
1451 | QL_DUMP_OB_MAC_RSP(mac_rsp); | ||
1452 | tx_ring = &qdev->tx_ring[mac_rsp->txq_idx]; | ||
1453 | tx_ring_desc = &tx_ring->q[mac_rsp->tid]; | ||
1454 | ql_unmap_send(qdev, tx_ring_desc, tx_ring_desc->map_cnt); | ||
1455 | qdev->stats.tx_bytes += tx_ring_desc->map_cnt; | ||
1456 | qdev->stats.tx_packets++; | ||
1457 | dev_kfree_skb(tx_ring_desc->skb); | ||
1458 | tx_ring_desc->skb = NULL; | ||
1459 | |||
1460 | if (unlikely(mac_rsp->flags1 & (OB_MAC_IOCB_RSP_E | | ||
1461 | OB_MAC_IOCB_RSP_S | | ||
1462 | OB_MAC_IOCB_RSP_L | | ||
1463 | OB_MAC_IOCB_RSP_P | OB_MAC_IOCB_RSP_B))) { | ||
1464 | if (mac_rsp->flags1 & OB_MAC_IOCB_RSP_E) { | ||
1465 | QPRINTK(qdev, TX_DONE, WARNING, | ||
1466 | "Total descriptor length did not match transfer length.\n"); | ||
1467 | } | ||
1468 | if (mac_rsp->flags1 & OB_MAC_IOCB_RSP_S) { | ||
1469 | QPRINTK(qdev, TX_DONE, WARNING, | ||
1470 | "Frame too short to be legal, not sent.\n"); | ||
1471 | } | ||
1472 | if (mac_rsp->flags1 & OB_MAC_IOCB_RSP_L) { | ||
1473 | QPRINTK(qdev, TX_DONE, WARNING, | ||
1474 | "Frame too long, but sent anyway.\n"); | ||
1475 | } | ||
1476 | if (mac_rsp->flags1 & OB_MAC_IOCB_RSP_B) { | ||
1477 | QPRINTK(qdev, TX_DONE, WARNING, | ||
1478 | "PCI backplane error. Frame not sent.\n"); | ||
1479 | } | ||
1480 | } | ||
1481 | atomic_inc(&tx_ring->tx_count); | ||
1482 | } | ||
1483 | |||
1484 | /* Fire up a handler to reset the MPI processor. */ | ||
1485 | void ql_queue_fw_error(struct ql_adapter *qdev) | ||
1486 | { | ||
1487 | netif_stop_queue(qdev->ndev); | ||
1488 | netif_carrier_off(qdev->ndev); | ||
1489 | queue_delayed_work(qdev->workqueue, &qdev->mpi_reset_work, 0); | ||
1490 | } | ||
1491 | |||
1492 | void ql_queue_asic_error(struct ql_adapter *qdev) | ||
1493 | { | ||
1494 | netif_stop_queue(qdev->ndev); | ||
1495 | netif_carrier_off(qdev->ndev); | ||
1496 | ql_disable_interrupts(qdev); | ||
1497 | queue_delayed_work(qdev->workqueue, &qdev->asic_reset_work, 0); | ||
1498 | } | ||
1499 | |||
1500 | static void ql_process_chip_ae_intr(struct ql_adapter *qdev, | ||
1501 | struct ib_ae_iocb_rsp *ib_ae_rsp) | ||
1502 | { | ||
1503 | switch (ib_ae_rsp->event) { | ||
1504 | case MGMT_ERR_EVENT: | ||
1505 | QPRINTK(qdev, RX_ERR, ERR, | ||
1506 | "Management Processor Fatal Error.\n"); | ||
1507 | ql_queue_fw_error(qdev); | ||
1508 | return; | ||
1509 | |||
1510 | case CAM_LOOKUP_ERR_EVENT: | ||
1511 | QPRINTK(qdev, LINK, ERR, | ||
1512 | "Multiple CAM hits lookup occurred.\n"); | ||
1513 | QPRINTK(qdev, DRV, ERR, "This event shouldn't occur.\n"); | ||
1514 | ql_queue_asic_error(qdev); | ||
1515 | return; | ||
1516 | |||
1517 | case SOFT_ECC_ERROR_EVENT: | ||
1518 | QPRINTK(qdev, RX_ERR, ERR, "Soft ECC error detected.\n"); | ||
1519 | ql_queue_asic_error(qdev); | ||
1520 | break; | ||
1521 | |||
1522 | case PCI_ERR_ANON_BUF_RD: | ||
1523 | QPRINTK(qdev, RX_ERR, ERR, | ||
1524 | "PCI error occurred when reading anonymous buffers from rx_ring %d.\n", | ||
1525 | ib_ae_rsp->q_id); | ||
1526 | ql_queue_asic_error(qdev); | ||
1527 | break; | ||
1528 | |||
1529 | default: | ||
1530 | QPRINTK(qdev, DRV, ERR, "Unexpected event %d.\n", | ||
1531 | ib_ae_rsp->event); | ||
1532 | ql_queue_asic_error(qdev); | ||
1533 | break; | ||
1534 | } | ||
1535 | } | ||
1536 | |||
1537 | static int ql_clean_outbound_rx_ring(struct rx_ring *rx_ring) | ||
1538 | { | ||
1539 | struct ql_adapter *qdev = rx_ring->qdev; | ||
1540 | u32 prod = ql_read_sh_reg(rx_ring->prod_idx_sh_reg); | ||
1541 | struct ob_mac_iocb_rsp *net_rsp = NULL; | ||
1542 | int count = 0; | ||
1543 | |||
1544 | /* While there are entries in the completion queue. */ | ||
1545 | while (prod != rx_ring->cnsmr_idx) { | ||
1546 | |||
1547 | QPRINTK(qdev, RX_STATUS, DEBUG, | ||
1548 | "cq_id = %d, prod = %d, cnsmr = %d.\n.", rx_ring->cq_id, | ||
1549 | prod, rx_ring->cnsmr_idx); | ||
1550 | |||
1551 | net_rsp = (struct ob_mac_iocb_rsp *)rx_ring->curr_entry; | ||
1552 | rmb(); | ||
1553 | switch (net_rsp->opcode) { | ||
1554 | |||
1555 | case OPCODE_OB_MAC_TSO_IOCB: | ||
1556 | case OPCODE_OB_MAC_IOCB: | ||
1557 | ql_process_mac_tx_intr(qdev, net_rsp); | ||
1558 | break; | ||
1559 | default: | ||
1560 | QPRINTK(qdev, RX_STATUS, DEBUG, | ||
1561 | "Hit default case, not handled! dropping the packet, opcode = %x.\n", | ||
1562 | net_rsp->opcode); | ||
1563 | } | ||
1564 | count++; | ||
1565 | ql_update_cq(rx_ring); | ||
1566 | prod = ql_read_sh_reg(rx_ring->prod_idx_sh_reg); | ||
1567 | } | ||
1568 | ql_write_cq_idx(rx_ring); | ||
1569 | if (netif_queue_stopped(qdev->ndev) && net_rsp != NULL) { | ||
1570 | struct tx_ring *tx_ring = &qdev->tx_ring[net_rsp->txq_idx]; | ||
1571 | if (atomic_read(&tx_ring->queue_stopped) && | ||
1572 | (atomic_read(&tx_ring->tx_count) > (tx_ring->wq_len / 4))) | ||
1573 | /* | ||
1574 | * The queue got stopped because the tx_ring was full. | ||
1575 | * Wake it up, because it's now at least 25% empty. | ||
1576 | */ | ||
1577 | netif_wake_queue(qdev->ndev); | ||
1578 | } | ||
1579 | |||
1580 | return count; | ||
1581 | } | ||
1582 | |||
1583 | static int ql_clean_inbound_rx_ring(struct rx_ring *rx_ring, int budget) | ||
1584 | { | ||
1585 | struct ql_adapter *qdev = rx_ring->qdev; | ||
1586 | u32 prod = ql_read_sh_reg(rx_ring->prod_idx_sh_reg); | ||
1587 | struct ql_net_rsp_iocb *net_rsp; | ||
1588 | int count = 0; | ||
1589 | |||
1590 | /* While there are entries in the completion queue. */ | ||
1591 | while (prod != rx_ring->cnsmr_idx) { | ||
1592 | |||
1593 | QPRINTK(qdev, RX_STATUS, DEBUG, | ||
1594 | "cq_id = %d, prod = %d, cnsmr = %d.\n.", rx_ring->cq_id, | ||
1595 | prod, rx_ring->cnsmr_idx); | ||
1596 | |||
1597 | net_rsp = rx_ring->curr_entry; | ||
1598 | rmb(); | ||
1599 | switch (net_rsp->opcode) { | ||
1600 | case OPCODE_IB_MAC_IOCB: | ||
1601 | ql_process_mac_rx_intr(qdev, rx_ring, | ||
1602 | (struct ib_mac_iocb_rsp *) | ||
1603 | net_rsp); | ||
1604 | break; | ||
1605 | |||
1606 | case OPCODE_IB_AE_IOCB: | ||
1607 | ql_process_chip_ae_intr(qdev, (struct ib_ae_iocb_rsp *) | ||
1608 | net_rsp); | ||
1609 | break; | ||
1610 | default: | ||
1611 | { | ||
1612 | QPRINTK(qdev, RX_STATUS, DEBUG, | ||
1613 | "Hit default case, not handled! dropping the packet, opcode = %x.\n", | ||
1614 | net_rsp->opcode); | ||
1615 | } | ||
1616 | } | ||
1617 | count++; | ||
1618 | ql_update_cq(rx_ring); | ||
1619 | prod = ql_read_sh_reg(rx_ring->prod_idx_sh_reg); | ||
1620 | if (count == budget) | ||
1621 | break; | ||
1622 | } | ||
1623 | ql_update_buffer_queues(qdev, rx_ring); | ||
1624 | ql_write_cq_idx(rx_ring); | ||
1625 | return count; | ||
1626 | } | ||
1627 | |||
1628 | static int ql_napi_poll_msix(struct napi_struct *napi, int budget) | ||
1629 | { | ||
1630 | struct rx_ring *rx_ring = container_of(napi, struct rx_ring, napi); | ||
1631 | struct ql_adapter *qdev = rx_ring->qdev; | ||
1632 | int work_done = ql_clean_inbound_rx_ring(rx_ring, budget); | ||
1633 | |||
1634 | QPRINTK(qdev, RX_STATUS, DEBUG, "Enter, NAPI POLL cq_id = %d.\n", | ||
1635 | rx_ring->cq_id); | ||
1636 | |||
1637 | if (work_done < budget) { | ||
1638 | __netif_rx_complete(qdev->ndev, napi); | ||
1639 | ql_enable_completion_interrupt(qdev, rx_ring->irq); | ||
1640 | } | ||
1641 | return work_done; | ||
1642 | } | ||
1643 | |||
1644 | static void ql_vlan_rx_register(struct net_device *ndev, struct vlan_group *grp) | ||
1645 | { | ||
1646 | struct ql_adapter *qdev = netdev_priv(ndev); | ||
1647 | |||
1648 | qdev->vlgrp = grp; | ||
1649 | if (grp) { | ||
1650 | QPRINTK(qdev, IFUP, DEBUG, "Turning on VLAN in NIC_RCV_CFG.\n"); | ||
1651 | ql_write32(qdev, NIC_RCV_CFG, NIC_RCV_CFG_VLAN_MASK | | ||
1652 | NIC_RCV_CFG_VLAN_MATCH_AND_NON); | ||
1653 | } else { | ||
1654 | QPRINTK(qdev, IFUP, DEBUG, | ||
1655 | "Turning off VLAN in NIC_RCV_CFG.\n"); | ||
1656 | ql_write32(qdev, NIC_RCV_CFG, NIC_RCV_CFG_VLAN_MASK); | ||
1657 | } | ||
1658 | } | ||
1659 | |||
1660 | static void ql_vlan_rx_add_vid(struct net_device *ndev, u16 vid) | ||
1661 | { | ||
1662 | struct ql_adapter *qdev = netdev_priv(ndev); | ||
1663 | u32 enable_bit = MAC_ADDR_E; | ||
1664 | |||
1665 | spin_lock(&qdev->hw_lock); | ||
1666 | if (ql_set_mac_addr_reg | ||
1667 | (qdev, (u8 *) &enable_bit, MAC_ADDR_TYPE_VLAN, vid)) { | ||
1668 | QPRINTK(qdev, IFUP, ERR, "Failed to init vlan address.\n"); | ||
1669 | } | ||
1670 | spin_unlock(&qdev->hw_lock); | ||
1671 | } | ||
1672 | |||
1673 | static void ql_vlan_rx_kill_vid(struct net_device *ndev, u16 vid) | ||
1674 | { | ||
1675 | struct ql_adapter *qdev = netdev_priv(ndev); | ||
1676 | u32 enable_bit = 0; | ||
1677 | |||
1678 | spin_lock(&qdev->hw_lock); | ||
1679 | if (ql_set_mac_addr_reg | ||
1680 | (qdev, (u8 *) &enable_bit, MAC_ADDR_TYPE_VLAN, vid)) { | ||
1681 | QPRINTK(qdev, IFUP, ERR, "Failed to clear vlan address.\n"); | ||
1682 | } | ||
1683 | spin_unlock(&qdev->hw_lock); | ||
1684 | |||
1685 | } | ||
1686 | |||
1687 | /* Worker thread to process a given rx_ring that is dedicated | ||
1688 | * to outbound completions. | ||
1689 | */ | ||
1690 | static void ql_tx_clean(struct work_struct *work) | ||
1691 | { | ||
1692 | struct rx_ring *rx_ring = | ||
1693 | container_of(work, struct rx_ring, rx_work.work); | ||
1694 | ql_clean_outbound_rx_ring(rx_ring); | ||
1695 | ql_enable_completion_interrupt(rx_ring->qdev, rx_ring->irq); | ||
1696 | |||
1697 | } | ||
1698 | |||
1699 | /* Worker thread to process a given rx_ring that is dedicated | ||
1700 | * to inbound completions. | ||
1701 | */ | ||
1702 | static void ql_rx_clean(struct work_struct *work) | ||
1703 | { | ||
1704 | struct rx_ring *rx_ring = | ||
1705 | container_of(work, struct rx_ring, rx_work.work); | ||
1706 | ql_clean_inbound_rx_ring(rx_ring, 64); | ||
1707 | ql_enable_completion_interrupt(rx_ring->qdev, rx_ring->irq); | ||
1708 | } | ||
1709 | |||
1710 | /* MSI-X Multiple Vector Interrupt Handler for outbound completions. */ | ||
1711 | static irqreturn_t qlge_msix_tx_isr(int irq, void *dev_id) | ||
1712 | { | ||
1713 | struct rx_ring *rx_ring = dev_id; | ||
1714 | queue_delayed_work_on(rx_ring->cpu, rx_ring->qdev->q_workqueue, | ||
1715 | &rx_ring->rx_work, 0); | ||
1716 | return IRQ_HANDLED; | ||
1717 | } | ||
1718 | |||
1719 | /* MSI-X Multiple Vector Interrupt Handler for inbound completions. */ | ||
1720 | static irqreturn_t qlge_msix_rx_isr(int irq, void *dev_id) | ||
1721 | { | ||
1722 | struct rx_ring *rx_ring = dev_id; | ||
1723 | struct ql_adapter *qdev = rx_ring->qdev; | ||
1724 | netif_rx_schedule(qdev->ndev, &rx_ring->napi); | ||
1725 | return IRQ_HANDLED; | ||
1726 | } | ||
1727 | |||
1728 | /* We check here to see if we're already handling a legacy | ||
1729 | * interrupt. If we are, then it must belong to another | ||
1730 | * chip with which we're sharing the interrupt line. | ||
1731 | */ | ||
1732 | int ql_legacy_check(struct ql_adapter *qdev) | ||
1733 | { | ||
1734 | int err; | ||
1735 | spin_lock(&qdev->legacy_lock); | ||
1736 | err = atomic_read(&qdev->intr_context[0].irq_cnt); | ||
1737 | spin_unlock(&qdev->legacy_lock); | ||
1738 | return err; | ||
1739 | } | ||
1740 | |||
1741 | /* This handles a fatal error, MPI activity, and the default | ||
1742 | * rx_ring in an MSI-X multiple vector environment. | ||
1743 | * In MSI/Legacy environment it also process the rest of | ||
1744 | * the rx_rings. | ||
1745 | */ | ||
1746 | static irqreturn_t qlge_isr(int irq, void *dev_id) | ||
1747 | { | ||
1748 | struct rx_ring *rx_ring = dev_id; | ||
1749 | struct ql_adapter *qdev = rx_ring->qdev; | ||
1750 | struct intr_context *intr_context = &qdev->intr_context[0]; | ||
1751 | u32 var; | ||
1752 | int i; | ||
1753 | int work_done = 0; | ||
1754 | |||
1755 | if (qdev->legacy_check && qdev->legacy_check(qdev)) { | ||
1756 | QPRINTK(qdev, INTR, INFO, "Already busy, not our interrupt.\n"); | ||
1757 | return IRQ_NONE; /* Not our interrupt */ | ||
1758 | } | ||
1759 | |||
1760 | var = ql_read32(qdev, STS); | ||
1761 | |||
1762 | /* | ||
1763 | * Check for fatal error. | ||
1764 | */ | ||
1765 | if (var & STS_FE) { | ||
1766 | ql_queue_asic_error(qdev); | ||
1767 | QPRINTK(qdev, INTR, ERR, "Got fatal error, STS = %x.\n", var); | ||
1768 | var = ql_read32(qdev, ERR_STS); | ||
1769 | QPRINTK(qdev, INTR, ERR, | ||
1770 | "Resetting chip. Error Status Register = 0x%x\n", var); | ||
1771 | return IRQ_HANDLED; | ||
1772 | } | ||
1773 | |||
1774 | /* | ||
1775 | * Check MPI processor activity. | ||
1776 | */ | ||
1777 | if (var & STS_PI) { | ||
1778 | /* | ||
1779 | * We've got an async event or mailbox completion. | ||
1780 | * Handle it and clear the source of the interrupt. | ||
1781 | */ | ||
1782 | QPRINTK(qdev, INTR, ERR, "Got MPI processor interrupt.\n"); | ||
1783 | ql_disable_completion_interrupt(qdev, intr_context->intr); | ||
1784 | queue_delayed_work_on(smp_processor_id(), qdev->workqueue, | ||
1785 | &qdev->mpi_work, 0); | ||
1786 | work_done++; | ||
1787 | } | ||
1788 | |||
1789 | /* | ||
1790 | * Check the default queue and wake handler if active. | ||
1791 | */ | ||
1792 | rx_ring = &qdev->rx_ring[0]; | ||
1793 | if (ql_read_sh_reg(rx_ring->prod_idx_sh_reg) != rx_ring->cnsmr_idx) { | ||
1794 | QPRINTK(qdev, INTR, INFO, "Waking handler for rx_ring[0].\n"); | ||
1795 | ql_disable_completion_interrupt(qdev, intr_context->intr); | ||
1796 | queue_delayed_work_on(smp_processor_id(), qdev->q_workqueue, | ||
1797 | &rx_ring->rx_work, 0); | ||
1798 | work_done++; | ||
1799 | } | ||
1800 | |||
1801 | if (!test_bit(QL_MSIX_ENABLED, &qdev->flags)) { | ||
1802 | /* | ||
1803 | * Start the DPC for each active queue. | ||
1804 | */ | ||
1805 | for (i = 1; i < qdev->rx_ring_count; i++) { | ||
1806 | rx_ring = &qdev->rx_ring[i]; | ||
1807 | if (ql_read_sh_reg(rx_ring->prod_idx_sh_reg) != | ||
1808 | rx_ring->cnsmr_idx) { | ||
1809 | QPRINTK(qdev, INTR, INFO, | ||
1810 | "Waking handler for rx_ring[%d].\n", i); | ||
1811 | ql_disable_completion_interrupt(qdev, | ||
1812 | intr_context-> | ||
1813 | intr); | ||
1814 | if (i < qdev->rss_ring_first_cq_id) | ||
1815 | queue_delayed_work_on(rx_ring->cpu, | ||
1816 | qdev->q_workqueue, | ||
1817 | &rx_ring->rx_work, | ||
1818 | 0); | ||
1819 | else | ||
1820 | netif_rx_schedule(qdev->ndev, | ||
1821 | &rx_ring->napi); | ||
1822 | work_done++; | ||
1823 | } | ||
1824 | } | ||
1825 | } | ||
1826 | return work_done ? IRQ_HANDLED : IRQ_NONE; | ||
1827 | } | ||
1828 | |||
1829 | static int ql_tso(struct sk_buff *skb, struct ob_mac_tso_iocb_req *mac_iocb_ptr) | ||
1830 | { | ||
1831 | |||
1832 | if (skb_is_gso(skb)) { | ||
1833 | int err; | ||
1834 | if (skb_header_cloned(skb)) { | ||
1835 | err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC); | ||
1836 | if (err) | ||
1837 | return err; | ||
1838 | } | ||
1839 | |||
1840 | mac_iocb_ptr->opcode = OPCODE_OB_MAC_TSO_IOCB; | ||
1841 | mac_iocb_ptr->flags3 |= OB_MAC_TSO_IOCB_IC; | ||
1842 | mac_iocb_ptr->frame_len = cpu_to_le32((u32) skb->len); | ||
1843 | mac_iocb_ptr->total_hdrs_len = | ||
1844 | cpu_to_le16(skb_transport_offset(skb) + tcp_hdrlen(skb)); | ||
1845 | mac_iocb_ptr->net_trans_offset = | ||
1846 | cpu_to_le16(skb_network_offset(skb) | | ||
1847 | skb_transport_offset(skb) | ||
1848 | << OB_MAC_TRANSPORT_HDR_SHIFT); | ||
1849 | mac_iocb_ptr->mss = cpu_to_le16(skb_shinfo(skb)->gso_size); | ||
1850 | mac_iocb_ptr->flags2 |= OB_MAC_TSO_IOCB_LSO; | ||
1851 | if (likely(skb->protocol == htons(ETH_P_IP))) { | ||
1852 | struct iphdr *iph = ip_hdr(skb); | ||
1853 | iph->check = 0; | ||
1854 | mac_iocb_ptr->flags1 |= OB_MAC_TSO_IOCB_IP4; | ||
1855 | tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr, | ||
1856 | iph->daddr, 0, | ||
1857 | IPPROTO_TCP, | ||
1858 | 0); | ||
1859 | } else if (skb->protocol == htons(ETH_P_IPV6)) { | ||
1860 | mac_iocb_ptr->flags1 |= OB_MAC_TSO_IOCB_IP6; | ||
1861 | tcp_hdr(skb)->check = | ||
1862 | ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr, | ||
1863 | &ipv6_hdr(skb)->daddr, | ||
1864 | 0, IPPROTO_TCP, 0); | ||
1865 | } | ||
1866 | return 1; | ||
1867 | } | ||
1868 | return 0; | ||
1869 | } | ||
1870 | |||
1871 | static void ql_hw_csum_setup(struct sk_buff *skb, | ||
1872 | struct ob_mac_tso_iocb_req *mac_iocb_ptr) | ||
1873 | { | ||
1874 | int len; | ||
1875 | struct iphdr *iph = ip_hdr(skb); | ||
1876 | u16 *check; | ||
1877 | mac_iocb_ptr->opcode = OPCODE_OB_MAC_TSO_IOCB; | ||
1878 | mac_iocb_ptr->frame_len = cpu_to_le32((u32) skb->len); | ||
1879 | mac_iocb_ptr->net_trans_offset = | ||
1880 | cpu_to_le16(skb_network_offset(skb) | | ||
1881 | skb_transport_offset(skb) << OB_MAC_TRANSPORT_HDR_SHIFT); | ||
1882 | |||
1883 | mac_iocb_ptr->flags1 |= OB_MAC_TSO_IOCB_IP4; | ||
1884 | len = (ntohs(iph->tot_len) - (iph->ihl << 2)); | ||
1885 | if (likely(iph->protocol == IPPROTO_TCP)) { | ||
1886 | check = &(tcp_hdr(skb)->check); | ||
1887 | mac_iocb_ptr->flags2 |= OB_MAC_TSO_IOCB_TC; | ||
1888 | mac_iocb_ptr->total_hdrs_len = | ||
1889 | cpu_to_le16(skb_transport_offset(skb) + | ||
1890 | (tcp_hdr(skb)->doff << 2)); | ||
1891 | } else { | ||
1892 | check = &(udp_hdr(skb)->check); | ||
1893 | mac_iocb_ptr->flags2 |= OB_MAC_TSO_IOCB_UC; | ||
1894 | mac_iocb_ptr->total_hdrs_len = | ||
1895 | cpu_to_le16(skb_transport_offset(skb) + | ||
1896 | sizeof(struct udphdr)); | ||
1897 | } | ||
1898 | *check = ~csum_tcpudp_magic(iph->saddr, | ||
1899 | iph->daddr, len, iph->protocol, 0); | ||
1900 | } | ||
1901 | |||
1902 | static int qlge_send(struct sk_buff *skb, struct net_device *ndev) | ||
1903 | { | ||
1904 | struct tx_ring_desc *tx_ring_desc; | ||
1905 | struct ob_mac_iocb_req *mac_iocb_ptr; | ||
1906 | struct ql_adapter *qdev = netdev_priv(ndev); | ||
1907 | int tso; | ||
1908 | struct tx_ring *tx_ring; | ||
1909 | u32 tx_ring_idx = (u32) QL_TXQ_IDX(qdev, skb); | ||
1910 | |||
1911 | tx_ring = &qdev->tx_ring[tx_ring_idx]; | ||
1912 | |||
1913 | if (unlikely(atomic_read(&tx_ring->tx_count) < 2)) { | ||
1914 | QPRINTK(qdev, TX_QUEUED, INFO, | ||
1915 | "%s: shutting down tx queue %d du to lack of resources.\n", | ||
1916 | __func__, tx_ring_idx); | ||
1917 | netif_stop_queue(ndev); | ||
1918 | atomic_inc(&tx_ring->queue_stopped); | ||
1919 | return NETDEV_TX_BUSY; | ||
1920 | } | ||
1921 | tx_ring_desc = &tx_ring->q[tx_ring->prod_idx]; | ||
1922 | mac_iocb_ptr = tx_ring_desc->queue_entry; | ||
1923 | memset((void *)mac_iocb_ptr, 0, sizeof(mac_iocb_ptr)); | ||
1924 | if (ql_map_send(qdev, mac_iocb_ptr, skb, tx_ring_desc) != NETDEV_TX_OK) { | ||
1925 | QPRINTK(qdev, TX_QUEUED, ERR, "Could not map the segments.\n"); | ||
1926 | return NETDEV_TX_BUSY; | ||
1927 | } | ||
1928 | |||
1929 | mac_iocb_ptr->opcode = OPCODE_OB_MAC_IOCB; | ||
1930 | mac_iocb_ptr->tid = tx_ring_desc->index; | ||
1931 | /* We use the upper 32-bits to store the tx queue for this IO. | ||
1932 | * When we get the completion we can use it to establish the context. | ||
1933 | */ | ||
1934 | mac_iocb_ptr->txq_idx = tx_ring_idx; | ||
1935 | tx_ring_desc->skb = skb; | ||
1936 | |||
1937 | mac_iocb_ptr->frame_len = cpu_to_le16((u16) skb->len); | ||
1938 | |||
1939 | if (qdev->vlgrp && vlan_tx_tag_present(skb)) { | ||
1940 | QPRINTK(qdev, TX_QUEUED, DEBUG, "Adding a vlan tag %d.\n", | ||
1941 | vlan_tx_tag_get(skb)); | ||
1942 | mac_iocb_ptr->flags3 |= OB_MAC_IOCB_V; | ||
1943 | mac_iocb_ptr->vlan_tci = cpu_to_le16(vlan_tx_tag_get(skb)); | ||
1944 | } | ||
1945 | tso = ql_tso(skb, (struct ob_mac_tso_iocb_req *)mac_iocb_ptr); | ||
1946 | if (tso < 0) { | ||
1947 | dev_kfree_skb_any(skb); | ||
1948 | return NETDEV_TX_OK; | ||
1949 | } else if (unlikely(!tso) && (skb->ip_summed == CHECKSUM_PARTIAL)) { | ||
1950 | ql_hw_csum_setup(skb, | ||
1951 | (struct ob_mac_tso_iocb_req *)mac_iocb_ptr); | ||
1952 | } | ||
1953 | QL_DUMP_OB_MAC_IOCB(mac_iocb_ptr); | ||
1954 | tx_ring->prod_idx++; | ||
1955 | if (tx_ring->prod_idx == tx_ring->wq_len) | ||
1956 | tx_ring->prod_idx = 0; | ||
1957 | wmb(); | ||
1958 | |||
1959 | ql_write_db_reg(tx_ring->prod_idx, tx_ring->prod_idx_db_reg); | ||
1960 | ndev->trans_start = jiffies; | ||
1961 | QPRINTK(qdev, TX_QUEUED, DEBUG, "tx queued, slot %d, len %d\n", | ||
1962 | tx_ring->prod_idx, skb->len); | ||
1963 | |||
1964 | atomic_dec(&tx_ring->tx_count); | ||
1965 | return NETDEV_TX_OK; | ||
1966 | } | ||
1967 | |||
1968 | static void ql_free_shadow_space(struct ql_adapter *qdev) | ||
1969 | { | ||
1970 | if (qdev->rx_ring_shadow_reg_area) { | ||
1971 | pci_free_consistent(qdev->pdev, | ||
1972 | PAGE_SIZE, | ||
1973 | qdev->rx_ring_shadow_reg_area, | ||
1974 | qdev->rx_ring_shadow_reg_dma); | ||
1975 | qdev->rx_ring_shadow_reg_area = NULL; | ||
1976 | } | ||
1977 | if (qdev->tx_ring_shadow_reg_area) { | ||
1978 | pci_free_consistent(qdev->pdev, | ||
1979 | PAGE_SIZE, | ||
1980 | qdev->tx_ring_shadow_reg_area, | ||
1981 | qdev->tx_ring_shadow_reg_dma); | ||
1982 | qdev->tx_ring_shadow_reg_area = NULL; | ||
1983 | } | ||
1984 | } | ||
1985 | |||
1986 | static int ql_alloc_shadow_space(struct ql_adapter *qdev) | ||
1987 | { | ||
1988 | qdev->rx_ring_shadow_reg_area = | ||
1989 | pci_alloc_consistent(qdev->pdev, | ||
1990 | PAGE_SIZE, &qdev->rx_ring_shadow_reg_dma); | ||
1991 | if (qdev->rx_ring_shadow_reg_area == NULL) { | ||
1992 | QPRINTK(qdev, IFUP, ERR, | ||
1993 | "Allocation of RX shadow space failed.\n"); | ||
1994 | return -ENOMEM; | ||
1995 | } | ||
1996 | qdev->tx_ring_shadow_reg_area = | ||
1997 | pci_alloc_consistent(qdev->pdev, PAGE_SIZE, | ||
1998 | &qdev->tx_ring_shadow_reg_dma); | ||
1999 | if (qdev->tx_ring_shadow_reg_area == NULL) { | ||
2000 | QPRINTK(qdev, IFUP, ERR, | ||
2001 | "Allocation of TX shadow space failed.\n"); | ||
2002 | goto err_wqp_sh_area; | ||
2003 | } | ||
2004 | return 0; | ||
2005 | |||
2006 | err_wqp_sh_area: | ||
2007 | pci_free_consistent(qdev->pdev, | ||
2008 | PAGE_SIZE, | ||
2009 | qdev->rx_ring_shadow_reg_area, | ||
2010 | qdev->rx_ring_shadow_reg_dma); | ||
2011 | return -ENOMEM; | ||
2012 | } | ||
2013 | |||
2014 | static void ql_init_tx_ring(struct ql_adapter *qdev, struct tx_ring *tx_ring) | ||
2015 | { | ||
2016 | struct tx_ring_desc *tx_ring_desc; | ||
2017 | int i; | ||
2018 | struct ob_mac_iocb_req *mac_iocb_ptr; | ||
2019 | |||
2020 | mac_iocb_ptr = tx_ring->wq_base; | ||
2021 | tx_ring_desc = tx_ring->q; | ||
2022 | for (i = 0; i < tx_ring->wq_len; i++) { | ||
2023 | tx_ring_desc->index = i; | ||
2024 | tx_ring_desc->skb = NULL; | ||
2025 | tx_ring_desc->queue_entry = mac_iocb_ptr; | ||
2026 | mac_iocb_ptr++; | ||
2027 | tx_ring_desc++; | ||
2028 | } | ||
2029 | atomic_set(&tx_ring->tx_count, tx_ring->wq_len); | ||
2030 | atomic_set(&tx_ring->queue_stopped, 0); | ||
2031 | } | ||
2032 | |||
2033 | static void ql_free_tx_resources(struct ql_adapter *qdev, | ||
2034 | struct tx_ring *tx_ring) | ||
2035 | { | ||
2036 | if (tx_ring->wq_base) { | ||
2037 | pci_free_consistent(qdev->pdev, tx_ring->wq_size, | ||
2038 | tx_ring->wq_base, tx_ring->wq_base_dma); | ||
2039 | tx_ring->wq_base = NULL; | ||
2040 | } | ||
2041 | kfree(tx_ring->q); | ||
2042 | tx_ring->q = NULL; | ||
2043 | } | ||
2044 | |||
2045 | static int ql_alloc_tx_resources(struct ql_adapter *qdev, | ||
2046 | struct tx_ring *tx_ring) | ||
2047 | { | ||
2048 | tx_ring->wq_base = | ||
2049 | pci_alloc_consistent(qdev->pdev, tx_ring->wq_size, | ||
2050 | &tx_ring->wq_base_dma); | ||
2051 | |||
2052 | if ((tx_ring->wq_base == NULL) | ||
2053 | || tx_ring->wq_base_dma & (tx_ring->wq_size - 1)) { | ||
2054 | QPRINTK(qdev, IFUP, ERR, "tx_ring alloc failed.\n"); | ||
2055 | return -ENOMEM; | ||
2056 | } | ||
2057 | tx_ring->q = | ||
2058 | kmalloc(tx_ring->wq_len * sizeof(struct tx_ring_desc), GFP_KERNEL); | ||
2059 | if (tx_ring->q == NULL) | ||
2060 | goto err; | ||
2061 | |||
2062 | return 0; | ||
2063 | err: | ||
2064 | pci_free_consistent(qdev->pdev, tx_ring->wq_size, | ||
2065 | tx_ring->wq_base, tx_ring->wq_base_dma); | ||
2066 | return -ENOMEM; | ||
2067 | } | ||
2068 | |||
2069 | void ql_free_lbq_buffers(struct ql_adapter *qdev, struct rx_ring *rx_ring) | ||
2070 | { | ||
2071 | int i; | ||
2072 | struct bq_desc *lbq_desc; | ||
2073 | |||
2074 | for (i = 0; i < rx_ring->lbq_len; i++) { | ||
2075 | lbq_desc = &rx_ring->lbq[i]; | ||
2076 | if (lbq_desc->p.lbq_page) { | ||
2077 | pci_unmap_page(qdev->pdev, | ||
2078 | pci_unmap_addr(lbq_desc, mapaddr), | ||
2079 | pci_unmap_len(lbq_desc, maplen), | ||
2080 | PCI_DMA_FROMDEVICE); | ||
2081 | |||
2082 | put_page(lbq_desc->p.lbq_page); | ||
2083 | lbq_desc->p.lbq_page = NULL; | ||
2084 | } | ||
2085 | lbq_desc->bq->addr_lo = 0; | ||
2086 | lbq_desc->bq->addr_hi = 0; | ||
2087 | } | ||
2088 | } | ||
2089 | |||
2090 | /* | ||
2091 | * Allocate and map a page for each element of the lbq. | ||
2092 | */ | ||
2093 | static int ql_alloc_lbq_buffers(struct ql_adapter *qdev, | ||
2094 | struct rx_ring *rx_ring) | ||
2095 | { | ||
2096 | int i; | ||
2097 | struct bq_desc *lbq_desc; | ||
2098 | u64 map; | ||
2099 | struct bq_element *bq = rx_ring->lbq_base; | ||
2100 | |||
2101 | for (i = 0; i < rx_ring->lbq_len; i++) { | ||
2102 | lbq_desc = &rx_ring->lbq[i]; | ||
2103 | memset(lbq_desc, 0, sizeof(lbq_desc)); | ||
2104 | lbq_desc->bq = bq; | ||
2105 | lbq_desc->index = i; | ||
2106 | lbq_desc->p.lbq_page = alloc_page(GFP_ATOMIC); | ||
2107 | if (unlikely(!lbq_desc->p.lbq_page)) { | ||
2108 | QPRINTK(qdev, IFUP, ERR, "failed alloc_page().\n"); | ||
2109 | goto mem_error; | ||
2110 | } else { | ||
2111 | map = pci_map_page(qdev->pdev, | ||
2112 | lbq_desc->p.lbq_page, | ||
2113 | 0, PAGE_SIZE, PCI_DMA_FROMDEVICE); | ||
2114 | if (pci_dma_mapping_error(qdev->pdev, map)) { | ||
2115 | QPRINTK(qdev, IFUP, ERR, | ||
2116 | "PCI mapping failed.\n"); | ||
2117 | goto mem_error; | ||
2118 | } | ||
2119 | pci_unmap_addr_set(lbq_desc, mapaddr, map); | ||
2120 | pci_unmap_len_set(lbq_desc, maplen, PAGE_SIZE); | ||
2121 | bq->addr_lo = cpu_to_le32(map); | ||
2122 | bq->addr_hi = cpu_to_le32(map >> 32); | ||
2123 | } | ||
2124 | bq++; | ||
2125 | } | ||
2126 | return 0; | ||
2127 | mem_error: | ||
2128 | ql_free_lbq_buffers(qdev, rx_ring); | ||
2129 | return -ENOMEM; | ||
2130 | } | ||
2131 | |||
2132 | void ql_free_sbq_buffers(struct ql_adapter *qdev, struct rx_ring *rx_ring) | ||
2133 | { | ||
2134 | int i; | ||
2135 | struct bq_desc *sbq_desc; | ||
2136 | |||
2137 | for (i = 0; i < rx_ring->sbq_len; i++) { | ||
2138 | sbq_desc = &rx_ring->sbq[i]; | ||
2139 | if (sbq_desc == NULL) { | ||
2140 | QPRINTK(qdev, IFUP, ERR, "sbq_desc %d is NULL.\n", i); | ||
2141 | return; | ||
2142 | } | ||
2143 | if (sbq_desc->p.skb) { | ||
2144 | pci_unmap_single(qdev->pdev, | ||
2145 | pci_unmap_addr(sbq_desc, mapaddr), | ||
2146 | pci_unmap_len(sbq_desc, maplen), | ||
2147 | PCI_DMA_FROMDEVICE); | ||
2148 | dev_kfree_skb(sbq_desc->p.skb); | ||
2149 | sbq_desc->p.skb = NULL; | ||
2150 | } | ||
2151 | if (sbq_desc->bq == NULL) { | ||
2152 | QPRINTK(qdev, IFUP, ERR, "sbq_desc->bq %d is NULL.\n", | ||
2153 | i); | ||
2154 | return; | ||
2155 | } | ||
2156 | sbq_desc->bq->addr_lo = 0; | ||
2157 | sbq_desc->bq->addr_hi = 0; | ||
2158 | } | ||
2159 | } | ||
2160 | |||
2161 | /* Allocate and map an skb for each element of the sbq. */ | ||
2162 | static int ql_alloc_sbq_buffers(struct ql_adapter *qdev, | ||
2163 | struct rx_ring *rx_ring) | ||
2164 | { | ||
2165 | int i; | ||
2166 | struct bq_desc *sbq_desc; | ||
2167 | struct sk_buff *skb; | ||
2168 | u64 map; | ||
2169 | struct bq_element *bq = rx_ring->sbq_base; | ||
2170 | |||
2171 | for (i = 0; i < rx_ring->sbq_len; i++) { | ||
2172 | sbq_desc = &rx_ring->sbq[i]; | ||
2173 | memset(sbq_desc, 0, sizeof(sbq_desc)); | ||
2174 | sbq_desc->index = i; | ||
2175 | sbq_desc->bq = bq; | ||
2176 | skb = netdev_alloc_skb(qdev->ndev, rx_ring->sbq_buf_size); | ||
2177 | if (unlikely(!skb)) { | ||
2178 | /* Better luck next round */ | ||
2179 | QPRINTK(qdev, IFUP, ERR, | ||
2180 | "small buff alloc failed for %d bytes at index %d.\n", | ||
2181 | rx_ring->sbq_buf_size, i); | ||
2182 | goto mem_err; | ||
2183 | } | ||
2184 | skb_reserve(skb, QLGE_SB_PAD); | ||
2185 | sbq_desc->p.skb = skb; | ||
2186 | /* | ||
2187 | * Map only half the buffer. Because the | ||
2188 | * other half may get some data copied to it | ||
2189 | * when the completion arrives. | ||
2190 | */ | ||
2191 | map = pci_map_single(qdev->pdev, | ||
2192 | skb->data, | ||
2193 | rx_ring->sbq_buf_size / 2, | ||
2194 | PCI_DMA_FROMDEVICE); | ||
2195 | if (pci_dma_mapping_error(qdev->pdev, map)) { | ||
2196 | QPRINTK(qdev, IFUP, ERR, "PCI mapping failed.\n"); | ||
2197 | goto mem_err; | ||
2198 | } | ||
2199 | pci_unmap_addr_set(sbq_desc, mapaddr, map); | ||
2200 | pci_unmap_len_set(sbq_desc, maplen, rx_ring->sbq_buf_size / 2); | ||
2201 | bq->addr_lo = /*sbq_desc->addr_lo = */ | ||
2202 | cpu_to_le32(map); | ||
2203 | bq->addr_hi = /*sbq_desc->addr_hi = */ | ||
2204 | cpu_to_le32(map >> 32); | ||
2205 | bq++; | ||
2206 | } | ||
2207 | return 0; | ||
2208 | mem_err: | ||
2209 | ql_free_sbq_buffers(qdev, rx_ring); | ||
2210 | return -ENOMEM; | ||
2211 | } | ||
2212 | |||
2213 | static void ql_free_rx_resources(struct ql_adapter *qdev, | ||
2214 | struct rx_ring *rx_ring) | ||
2215 | { | ||
2216 | if (rx_ring->sbq_len) | ||
2217 | ql_free_sbq_buffers(qdev, rx_ring); | ||
2218 | if (rx_ring->lbq_len) | ||
2219 | ql_free_lbq_buffers(qdev, rx_ring); | ||
2220 | |||
2221 | /* Free the small buffer queue. */ | ||
2222 | if (rx_ring->sbq_base) { | ||
2223 | pci_free_consistent(qdev->pdev, | ||
2224 | rx_ring->sbq_size, | ||
2225 | rx_ring->sbq_base, rx_ring->sbq_base_dma); | ||
2226 | rx_ring->sbq_base = NULL; | ||
2227 | } | ||
2228 | |||
2229 | /* Free the small buffer queue control blocks. */ | ||
2230 | kfree(rx_ring->sbq); | ||
2231 | rx_ring->sbq = NULL; | ||
2232 | |||
2233 | /* Free the large buffer queue. */ | ||
2234 | if (rx_ring->lbq_base) { | ||
2235 | pci_free_consistent(qdev->pdev, | ||
2236 | rx_ring->lbq_size, | ||
2237 | rx_ring->lbq_base, rx_ring->lbq_base_dma); | ||
2238 | rx_ring->lbq_base = NULL; | ||
2239 | } | ||
2240 | |||
2241 | /* Free the large buffer queue control blocks. */ | ||
2242 | kfree(rx_ring->lbq); | ||
2243 | rx_ring->lbq = NULL; | ||
2244 | |||
2245 | /* Free the rx queue. */ | ||
2246 | if (rx_ring->cq_base) { | ||
2247 | pci_free_consistent(qdev->pdev, | ||
2248 | rx_ring->cq_size, | ||
2249 | rx_ring->cq_base, rx_ring->cq_base_dma); | ||
2250 | rx_ring->cq_base = NULL; | ||
2251 | } | ||
2252 | } | ||
2253 | |||
2254 | /* Allocate queues and buffers for this completions queue based | ||
2255 | * on the values in the parameter structure. */ | ||
2256 | static int ql_alloc_rx_resources(struct ql_adapter *qdev, | ||
2257 | struct rx_ring *rx_ring) | ||
2258 | { | ||
2259 | |||
2260 | /* | ||
2261 | * Allocate the completion queue for this rx_ring. | ||
2262 | */ | ||
2263 | rx_ring->cq_base = | ||
2264 | pci_alloc_consistent(qdev->pdev, rx_ring->cq_size, | ||
2265 | &rx_ring->cq_base_dma); | ||
2266 | |||
2267 | if (rx_ring->cq_base == NULL) { | ||
2268 | QPRINTK(qdev, IFUP, ERR, "rx_ring alloc failed.\n"); | ||
2269 | return -ENOMEM; | ||
2270 | } | ||
2271 | |||
2272 | if (rx_ring->sbq_len) { | ||
2273 | /* | ||
2274 | * Allocate small buffer queue. | ||
2275 | */ | ||
2276 | rx_ring->sbq_base = | ||
2277 | pci_alloc_consistent(qdev->pdev, rx_ring->sbq_size, | ||
2278 | &rx_ring->sbq_base_dma); | ||
2279 | |||
2280 | if (rx_ring->sbq_base == NULL) { | ||
2281 | QPRINTK(qdev, IFUP, ERR, | ||
2282 | "Small buffer queue allocation failed.\n"); | ||
2283 | goto err_mem; | ||
2284 | } | ||
2285 | |||
2286 | /* | ||
2287 | * Allocate small buffer queue control blocks. | ||
2288 | */ | ||
2289 | rx_ring->sbq = | ||
2290 | kmalloc(rx_ring->sbq_len * sizeof(struct bq_desc), | ||
2291 | GFP_KERNEL); | ||
2292 | if (rx_ring->sbq == NULL) { | ||
2293 | QPRINTK(qdev, IFUP, ERR, | ||
2294 | "Small buffer queue control block allocation failed.\n"); | ||
2295 | goto err_mem; | ||
2296 | } | ||
2297 | |||
2298 | if (ql_alloc_sbq_buffers(qdev, rx_ring)) { | ||
2299 | QPRINTK(qdev, IFUP, ERR, | ||
2300 | "Small buffer allocation failed.\n"); | ||
2301 | goto err_mem; | ||
2302 | } | ||
2303 | } | ||
2304 | |||
2305 | if (rx_ring->lbq_len) { | ||
2306 | /* | ||
2307 | * Allocate large buffer queue. | ||
2308 | */ | ||
2309 | rx_ring->lbq_base = | ||
2310 | pci_alloc_consistent(qdev->pdev, rx_ring->lbq_size, | ||
2311 | &rx_ring->lbq_base_dma); | ||
2312 | |||
2313 | if (rx_ring->lbq_base == NULL) { | ||
2314 | QPRINTK(qdev, IFUP, ERR, | ||
2315 | "Large buffer queue allocation failed.\n"); | ||
2316 | goto err_mem; | ||
2317 | } | ||
2318 | /* | ||
2319 | * Allocate large buffer queue control blocks. | ||
2320 | */ | ||
2321 | rx_ring->lbq = | ||
2322 | kmalloc(rx_ring->lbq_len * sizeof(struct bq_desc), | ||
2323 | GFP_KERNEL); | ||
2324 | if (rx_ring->lbq == NULL) { | ||
2325 | QPRINTK(qdev, IFUP, ERR, | ||
2326 | "Large buffer queue control block allocation failed.\n"); | ||
2327 | goto err_mem; | ||
2328 | } | ||
2329 | |||
2330 | /* | ||
2331 | * Allocate the buffers. | ||
2332 | */ | ||
2333 | if (ql_alloc_lbq_buffers(qdev, rx_ring)) { | ||
2334 | QPRINTK(qdev, IFUP, ERR, | ||
2335 | "Large buffer allocation failed.\n"); | ||
2336 | goto err_mem; | ||
2337 | } | ||
2338 | } | ||
2339 | |||
2340 | return 0; | ||
2341 | |||
2342 | err_mem: | ||
2343 | ql_free_rx_resources(qdev, rx_ring); | ||
2344 | return -ENOMEM; | ||
2345 | } | ||
2346 | |||
2347 | static void ql_tx_ring_clean(struct ql_adapter *qdev) | ||
2348 | { | ||
2349 | struct tx_ring *tx_ring; | ||
2350 | struct tx_ring_desc *tx_ring_desc; | ||
2351 | int i, j; | ||
2352 | |||
2353 | /* | ||
2354 | * Loop through all queues and free | ||
2355 | * any resources. | ||
2356 | */ | ||
2357 | for (j = 0; j < qdev->tx_ring_count; j++) { | ||
2358 | tx_ring = &qdev->tx_ring[j]; | ||
2359 | for (i = 0; i < tx_ring->wq_len; i++) { | ||
2360 | tx_ring_desc = &tx_ring->q[i]; | ||
2361 | if (tx_ring_desc && tx_ring_desc->skb) { | ||
2362 | QPRINTK(qdev, IFDOWN, ERR, | ||
2363 | "Freeing lost SKB %p, from queue %d, index %d.\n", | ||
2364 | tx_ring_desc->skb, j, | ||
2365 | tx_ring_desc->index); | ||
2366 | ql_unmap_send(qdev, tx_ring_desc, | ||
2367 | tx_ring_desc->map_cnt); | ||
2368 | dev_kfree_skb(tx_ring_desc->skb); | ||
2369 | tx_ring_desc->skb = NULL; | ||
2370 | } | ||
2371 | } | ||
2372 | } | ||
2373 | } | ||
2374 | |||
2375 | static void ql_free_ring_cb(struct ql_adapter *qdev) | ||
2376 | { | ||
2377 | kfree(qdev->ring_mem); | ||
2378 | } | ||
2379 | |||
2380 | static int ql_alloc_ring_cb(struct ql_adapter *qdev) | ||
2381 | { | ||
2382 | /* Allocate space for tx/rx ring control blocks. */ | ||
2383 | qdev->ring_mem_size = | ||
2384 | (qdev->tx_ring_count * sizeof(struct tx_ring)) + | ||
2385 | (qdev->rx_ring_count * sizeof(struct rx_ring)); | ||
2386 | qdev->ring_mem = kmalloc(qdev->ring_mem_size, GFP_KERNEL); | ||
2387 | if (qdev->ring_mem == NULL) { | ||
2388 | return -ENOMEM; | ||
2389 | } else { | ||
2390 | qdev->rx_ring = qdev->ring_mem; | ||
2391 | qdev->tx_ring = qdev->ring_mem + | ||
2392 | (qdev->rx_ring_count * sizeof(struct rx_ring)); | ||
2393 | } | ||
2394 | return 0; | ||
2395 | } | ||
2396 | |||
2397 | static void ql_free_mem_resources(struct ql_adapter *qdev) | ||
2398 | { | ||
2399 | int i; | ||
2400 | |||
2401 | for (i = 0; i < qdev->tx_ring_count; i++) | ||
2402 | ql_free_tx_resources(qdev, &qdev->tx_ring[i]); | ||
2403 | for (i = 0; i < qdev->rx_ring_count; i++) | ||
2404 | ql_free_rx_resources(qdev, &qdev->rx_ring[i]); | ||
2405 | ql_free_shadow_space(qdev); | ||
2406 | } | ||
2407 | |||
2408 | static int ql_alloc_mem_resources(struct ql_adapter *qdev) | ||
2409 | { | ||
2410 | int i; | ||
2411 | |||
2412 | /* Allocate space for our shadow registers and such. */ | ||
2413 | if (ql_alloc_shadow_space(qdev)) | ||
2414 | return -ENOMEM; | ||
2415 | |||
2416 | for (i = 0; i < qdev->rx_ring_count; i++) { | ||
2417 | if (ql_alloc_rx_resources(qdev, &qdev->rx_ring[i]) != 0) { | ||
2418 | QPRINTK(qdev, IFUP, ERR, | ||
2419 | "RX resource allocation failed.\n"); | ||
2420 | goto err_mem; | ||
2421 | } | ||
2422 | } | ||
2423 | /* Allocate tx queue resources */ | ||
2424 | for (i = 0; i < qdev->tx_ring_count; i++) { | ||
2425 | if (ql_alloc_tx_resources(qdev, &qdev->tx_ring[i]) != 0) { | ||
2426 | QPRINTK(qdev, IFUP, ERR, | ||
2427 | "TX resource allocation failed.\n"); | ||
2428 | goto err_mem; | ||
2429 | } | ||
2430 | } | ||
2431 | return 0; | ||
2432 | |||
2433 | err_mem: | ||
2434 | ql_free_mem_resources(qdev); | ||
2435 | return -ENOMEM; | ||
2436 | } | ||
2437 | |||
2438 | /* Set up the rx ring control block and pass it to the chip. | ||
2439 | * The control block is defined as | ||
2440 | * "Completion Queue Initialization Control Block", or cqicb. | ||
2441 | */ | ||
2442 | static int ql_start_rx_ring(struct ql_adapter *qdev, struct rx_ring *rx_ring) | ||
2443 | { | ||
2444 | struct cqicb *cqicb = &rx_ring->cqicb; | ||
2445 | void *shadow_reg = qdev->rx_ring_shadow_reg_area + | ||
2446 | (rx_ring->cq_id * sizeof(u64) * 4); | ||
2447 | u64 shadow_reg_dma = qdev->rx_ring_shadow_reg_dma + | ||
2448 | (rx_ring->cq_id * sizeof(u64) * 4); | ||
2449 | void __iomem *doorbell_area = | ||
2450 | qdev->doorbell_area + (DB_PAGE_SIZE * (128 + rx_ring->cq_id)); | ||
2451 | int err = 0; | ||
2452 | u16 bq_len; | ||
2453 | |||
2454 | /* Set up the shadow registers for this ring. */ | ||
2455 | rx_ring->prod_idx_sh_reg = shadow_reg; | ||
2456 | rx_ring->prod_idx_sh_reg_dma = shadow_reg_dma; | ||
2457 | shadow_reg += sizeof(u64); | ||
2458 | shadow_reg_dma += sizeof(u64); | ||
2459 | rx_ring->lbq_base_indirect = shadow_reg; | ||
2460 | rx_ring->lbq_base_indirect_dma = shadow_reg_dma; | ||
2461 | shadow_reg += sizeof(u64); | ||
2462 | shadow_reg_dma += sizeof(u64); | ||
2463 | rx_ring->sbq_base_indirect = shadow_reg; | ||
2464 | rx_ring->sbq_base_indirect_dma = shadow_reg_dma; | ||
2465 | |||
2466 | /* PCI doorbell mem area + 0x00 for consumer index register */ | ||
2467 | rx_ring->cnsmr_idx_db_reg = (u32 *) doorbell_area; | ||
2468 | rx_ring->cnsmr_idx = 0; | ||
2469 | rx_ring->curr_entry = rx_ring->cq_base; | ||
2470 | |||
2471 | /* PCI doorbell mem area + 0x04 for valid register */ | ||
2472 | rx_ring->valid_db_reg = doorbell_area + 0x04; | ||
2473 | |||
2474 | /* PCI doorbell mem area + 0x18 for large buffer consumer */ | ||
2475 | rx_ring->lbq_prod_idx_db_reg = (u32 *) (doorbell_area + 0x18); | ||
2476 | |||
2477 | /* PCI doorbell mem area + 0x1c */ | ||
2478 | rx_ring->sbq_prod_idx_db_reg = (u32 *) (doorbell_area + 0x1c); | ||
2479 | |||
2480 | memset((void *)cqicb, 0, sizeof(struct cqicb)); | ||
2481 | cqicb->msix_vect = rx_ring->irq; | ||
2482 | |||
2483 | cqicb->len = cpu_to_le16(rx_ring->cq_len | LEN_V | LEN_CPP_CONT); | ||
2484 | |||
2485 | cqicb->addr_lo = cpu_to_le32(rx_ring->cq_base_dma); | ||
2486 | cqicb->addr_hi = cpu_to_le32((u64) rx_ring->cq_base_dma >> 32); | ||
2487 | |||
2488 | cqicb->prod_idx_addr_lo = cpu_to_le32(rx_ring->prod_idx_sh_reg_dma); | ||
2489 | cqicb->prod_idx_addr_hi = | ||
2490 | cpu_to_le32((u64) rx_ring->prod_idx_sh_reg_dma >> 32); | ||
2491 | |||
2492 | /* | ||
2493 | * Set up the control block load flags. | ||
2494 | */ | ||
2495 | cqicb->flags = FLAGS_LC | /* Load queue base address */ | ||
2496 | FLAGS_LV | /* Load MSI-X vector */ | ||
2497 | FLAGS_LI; /* Load irq delay values */ | ||
2498 | if (rx_ring->lbq_len) { | ||
2499 | cqicb->flags |= FLAGS_LL; /* Load lbq values */ | ||
2500 | *((u64 *) rx_ring->lbq_base_indirect) = rx_ring->lbq_base_dma; | ||
2501 | cqicb->lbq_addr_lo = | ||
2502 | cpu_to_le32(rx_ring->lbq_base_indirect_dma); | ||
2503 | cqicb->lbq_addr_hi = | ||
2504 | cpu_to_le32((u64) rx_ring->lbq_base_indirect_dma >> 32); | ||
2505 | cqicb->lbq_buf_size = cpu_to_le32(rx_ring->lbq_buf_size); | ||
2506 | bq_len = (u16) rx_ring->lbq_len; | ||
2507 | cqicb->lbq_len = cpu_to_le16(bq_len); | ||
2508 | rx_ring->lbq_prod_idx = rx_ring->lbq_len - 16; | ||
2509 | rx_ring->lbq_curr_idx = 0; | ||
2510 | rx_ring->lbq_clean_idx = rx_ring->lbq_prod_idx; | ||
2511 | rx_ring->lbq_free_cnt = 16; | ||
2512 | } | ||
2513 | if (rx_ring->sbq_len) { | ||
2514 | cqicb->flags |= FLAGS_LS; /* Load sbq values */ | ||
2515 | *((u64 *) rx_ring->sbq_base_indirect) = rx_ring->sbq_base_dma; | ||
2516 | cqicb->sbq_addr_lo = | ||
2517 | cpu_to_le32(rx_ring->sbq_base_indirect_dma); | ||
2518 | cqicb->sbq_addr_hi = | ||
2519 | cpu_to_le32((u64) rx_ring->sbq_base_indirect_dma >> 32); | ||
2520 | cqicb->sbq_buf_size = | ||
2521 | cpu_to_le16(((rx_ring->sbq_buf_size / 2) + 8) & 0xfffffff8); | ||
2522 | bq_len = (u16) rx_ring->sbq_len; | ||
2523 | cqicb->sbq_len = cpu_to_le16(bq_len); | ||
2524 | rx_ring->sbq_prod_idx = rx_ring->sbq_len - 16; | ||
2525 | rx_ring->sbq_curr_idx = 0; | ||
2526 | rx_ring->sbq_clean_idx = rx_ring->sbq_prod_idx; | ||
2527 | rx_ring->sbq_free_cnt = 16; | ||
2528 | } | ||
2529 | switch (rx_ring->type) { | ||
2530 | case TX_Q: | ||
2531 | /* If there's only one interrupt, then we use | ||
2532 | * worker threads to process the outbound | ||
2533 | * completion handling rx_rings. We do this so | ||
2534 | * they can be run on multiple CPUs. There is | ||
2535 | * room to play with this more where we would only | ||
2536 | * run in a worker if there are more than x number | ||
2537 | * of outbound completions on the queue and more | ||
2538 | * than one queue active. Some threshold that | ||
2539 | * would indicate a benefit in spite of the cost | ||
2540 | * of a context switch. | ||
2541 | * If there's more than one interrupt, then the | ||
2542 | * outbound completions are processed in the ISR. | ||
2543 | */ | ||
2544 | if (!test_bit(QL_MSIX_ENABLED, &qdev->flags)) | ||
2545 | INIT_DELAYED_WORK(&rx_ring->rx_work, ql_tx_clean); | ||
2546 | else { | ||
2547 | /* With all debug warnings on we see a WARN_ON message | ||
2548 | * when we free the skb in the interrupt context. | ||
2549 | */ | ||
2550 | INIT_DELAYED_WORK(&rx_ring->rx_work, ql_tx_clean); | ||
2551 | } | ||
2552 | cqicb->irq_delay = cpu_to_le16(qdev->tx_coalesce_usecs); | ||
2553 | cqicb->pkt_delay = cpu_to_le16(qdev->tx_max_coalesced_frames); | ||
2554 | break; | ||
2555 | case DEFAULT_Q: | ||
2556 | INIT_DELAYED_WORK(&rx_ring->rx_work, ql_rx_clean); | ||
2557 | cqicb->irq_delay = 0; | ||
2558 | cqicb->pkt_delay = 0; | ||
2559 | break; | ||
2560 | case RX_Q: | ||
2561 | /* Inbound completion handling rx_rings run in | ||
2562 | * separate NAPI contexts. | ||
2563 | */ | ||
2564 | netif_napi_add(qdev->ndev, &rx_ring->napi, ql_napi_poll_msix, | ||
2565 | 64); | ||
2566 | cqicb->irq_delay = cpu_to_le16(qdev->rx_coalesce_usecs); | ||
2567 | cqicb->pkt_delay = cpu_to_le16(qdev->rx_max_coalesced_frames); | ||
2568 | break; | ||
2569 | default: | ||
2570 | QPRINTK(qdev, IFUP, DEBUG, "Invalid rx_ring->type = %d.\n", | ||
2571 | rx_ring->type); | ||
2572 | } | ||
2573 | QPRINTK(qdev, IFUP, INFO, "Initializing rx work queue.\n"); | ||
2574 | err = ql_write_cfg(qdev, cqicb, sizeof(struct cqicb), | ||
2575 | CFG_LCQ, rx_ring->cq_id); | ||
2576 | if (err) { | ||
2577 | QPRINTK(qdev, IFUP, ERR, "Failed to load CQICB.\n"); | ||
2578 | return err; | ||
2579 | } | ||
2580 | QPRINTK(qdev, IFUP, INFO, "Successfully loaded CQICB.\n"); | ||
2581 | /* | ||
2582 | * Advance the producer index for the buffer queues. | ||
2583 | */ | ||
2584 | wmb(); | ||
2585 | if (rx_ring->lbq_len) | ||
2586 | ql_write_db_reg(rx_ring->lbq_prod_idx, | ||
2587 | rx_ring->lbq_prod_idx_db_reg); | ||
2588 | if (rx_ring->sbq_len) | ||
2589 | ql_write_db_reg(rx_ring->sbq_prod_idx, | ||
2590 | rx_ring->sbq_prod_idx_db_reg); | ||
2591 | return err; | ||
2592 | } | ||
2593 | |||
2594 | static int ql_start_tx_ring(struct ql_adapter *qdev, struct tx_ring *tx_ring) | ||
2595 | { | ||
2596 | struct wqicb *wqicb = (struct wqicb *)tx_ring; | ||
2597 | void __iomem *doorbell_area = | ||
2598 | qdev->doorbell_area + (DB_PAGE_SIZE * tx_ring->wq_id); | ||
2599 | void *shadow_reg = qdev->tx_ring_shadow_reg_area + | ||
2600 | (tx_ring->wq_id * sizeof(u64)); | ||
2601 | u64 shadow_reg_dma = qdev->tx_ring_shadow_reg_dma + | ||
2602 | (tx_ring->wq_id * sizeof(u64)); | ||
2603 | int err = 0; | ||
2604 | |||
2605 | /* | ||
2606 | * Assign doorbell registers for this tx_ring. | ||
2607 | */ | ||
2608 | /* TX PCI doorbell mem area for tx producer index */ | ||
2609 | tx_ring->prod_idx_db_reg = (u32 *) doorbell_area; | ||
2610 | tx_ring->prod_idx = 0; | ||
2611 | /* TX PCI doorbell mem area + 0x04 */ | ||
2612 | tx_ring->valid_db_reg = doorbell_area + 0x04; | ||
2613 | |||
2614 | /* | ||
2615 | * Assign shadow registers for this tx_ring. | ||
2616 | */ | ||
2617 | tx_ring->cnsmr_idx_sh_reg = shadow_reg; | ||
2618 | tx_ring->cnsmr_idx_sh_reg_dma = shadow_reg_dma; | ||
2619 | |||
2620 | wqicb->len = cpu_to_le16(tx_ring->wq_len | Q_LEN_V | Q_LEN_CPP_CONT); | ||
2621 | wqicb->flags = cpu_to_le16(Q_FLAGS_LC | | ||
2622 | Q_FLAGS_LB | Q_FLAGS_LI | Q_FLAGS_LO); | ||
2623 | wqicb->cq_id_rss = cpu_to_le16(tx_ring->cq_id); | ||
2624 | wqicb->rid = 0; | ||
2625 | wqicb->addr_lo = cpu_to_le32(tx_ring->wq_base_dma); | ||
2626 | wqicb->addr_hi = cpu_to_le32((u64) tx_ring->wq_base_dma >> 32); | ||
2627 | |||
2628 | wqicb->cnsmr_idx_addr_lo = cpu_to_le32(tx_ring->cnsmr_idx_sh_reg_dma); | ||
2629 | wqicb->cnsmr_idx_addr_hi = | ||
2630 | cpu_to_le32((u64) tx_ring->cnsmr_idx_sh_reg_dma >> 32); | ||
2631 | |||
2632 | ql_init_tx_ring(qdev, tx_ring); | ||
2633 | |||
2634 | err = ql_write_cfg(qdev, wqicb, sizeof(wqicb), CFG_LRQ, | ||
2635 | (u16) tx_ring->wq_id); | ||
2636 | if (err) { | ||
2637 | QPRINTK(qdev, IFUP, ERR, "Failed to load tx_ring.\n"); | ||
2638 | return err; | ||
2639 | } | ||
2640 | QPRINTK(qdev, IFUP, INFO, "Successfully loaded WQICB.\n"); | ||
2641 | return err; | ||
2642 | } | ||
2643 | |||
2644 | static void ql_disable_msix(struct ql_adapter *qdev) | ||
2645 | { | ||
2646 | if (test_bit(QL_MSIX_ENABLED, &qdev->flags)) { | ||
2647 | pci_disable_msix(qdev->pdev); | ||
2648 | clear_bit(QL_MSIX_ENABLED, &qdev->flags); | ||
2649 | kfree(qdev->msi_x_entry); | ||
2650 | qdev->msi_x_entry = NULL; | ||
2651 | } else if (test_bit(QL_MSI_ENABLED, &qdev->flags)) { | ||
2652 | pci_disable_msi(qdev->pdev); | ||
2653 | clear_bit(QL_MSI_ENABLED, &qdev->flags); | ||
2654 | } | ||
2655 | } | ||
2656 | |||
2657 | static void ql_enable_msix(struct ql_adapter *qdev) | ||
2658 | { | ||
2659 | int i; | ||
2660 | |||
2661 | qdev->intr_count = 1; | ||
2662 | /* Get the MSIX vectors. */ | ||
2663 | if (irq_type == MSIX_IRQ) { | ||
2664 | /* Try to alloc space for the msix struct, | ||
2665 | * if it fails then go to MSI/legacy. | ||
2666 | */ | ||
2667 | qdev->msi_x_entry = kcalloc(qdev->rx_ring_count, | ||
2668 | sizeof(struct msix_entry), | ||
2669 | GFP_KERNEL); | ||
2670 | if (!qdev->msi_x_entry) { | ||
2671 | irq_type = MSI_IRQ; | ||
2672 | goto msi; | ||
2673 | } | ||
2674 | |||
2675 | for (i = 0; i < qdev->rx_ring_count; i++) | ||
2676 | qdev->msi_x_entry[i].entry = i; | ||
2677 | |||
2678 | if (!pci_enable_msix | ||
2679 | (qdev->pdev, qdev->msi_x_entry, qdev->rx_ring_count)) { | ||
2680 | set_bit(QL_MSIX_ENABLED, &qdev->flags); | ||
2681 | qdev->intr_count = qdev->rx_ring_count; | ||
2682 | QPRINTK(qdev, IFUP, INFO, | ||
2683 | "MSI-X Enabled, got %d vectors.\n", | ||
2684 | qdev->intr_count); | ||
2685 | return; | ||
2686 | } else { | ||
2687 | kfree(qdev->msi_x_entry); | ||
2688 | qdev->msi_x_entry = NULL; | ||
2689 | QPRINTK(qdev, IFUP, WARNING, | ||
2690 | "MSI-X Enable failed, trying MSI.\n"); | ||
2691 | irq_type = MSI_IRQ; | ||
2692 | } | ||
2693 | } | ||
2694 | msi: | ||
2695 | if (irq_type == MSI_IRQ) { | ||
2696 | if (!pci_enable_msi(qdev->pdev)) { | ||
2697 | set_bit(QL_MSI_ENABLED, &qdev->flags); | ||
2698 | QPRINTK(qdev, IFUP, INFO, | ||
2699 | "Running with MSI interrupts.\n"); | ||
2700 | return; | ||
2701 | } | ||
2702 | } | ||
2703 | irq_type = LEG_IRQ; | ||
2704 | spin_lock_init(&qdev->legacy_lock); | ||
2705 | qdev->legacy_check = ql_legacy_check; | ||
2706 | QPRINTK(qdev, IFUP, DEBUG, "Running with legacy interrupts.\n"); | ||
2707 | } | ||
2708 | |||
2709 | /* | ||
2710 | * Here we build the intr_context structures based on | ||
2711 | * our rx_ring count and intr vector count. | ||
2712 | * The intr_context structure is used to hook each vector | ||
2713 | * to possibly different handlers. | ||
2714 | */ | ||
2715 | static void ql_resolve_queues_to_irqs(struct ql_adapter *qdev) | ||
2716 | { | ||
2717 | int i = 0; | ||
2718 | struct intr_context *intr_context = &qdev->intr_context[0]; | ||
2719 | |||
2720 | ql_enable_msix(qdev); | ||
2721 | |||
2722 | if (likely(test_bit(QL_MSIX_ENABLED, &qdev->flags))) { | ||
2723 | /* Each rx_ring has it's | ||
2724 | * own intr_context since we have separate | ||
2725 | * vectors for each queue. | ||
2726 | * This only true when MSI-X is enabled. | ||
2727 | */ | ||
2728 | for (i = 0; i < qdev->intr_count; i++, intr_context++) { | ||
2729 | qdev->rx_ring[i].irq = i; | ||
2730 | intr_context->intr = i; | ||
2731 | intr_context->qdev = qdev; | ||
2732 | /* | ||
2733 | * We set up each vectors enable/disable/read bits so | ||
2734 | * there's no bit/mask calculations in the critical path. | ||
2735 | */ | ||
2736 | intr_context->intr_en_mask = | ||
2737 | INTR_EN_TYPE_MASK | INTR_EN_INTR_MASK | | ||
2738 | INTR_EN_TYPE_ENABLE | INTR_EN_IHD_MASK | INTR_EN_IHD | ||
2739 | | i; | ||
2740 | intr_context->intr_dis_mask = | ||
2741 | INTR_EN_TYPE_MASK | INTR_EN_INTR_MASK | | ||
2742 | INTR_EN_TYPE_DISABLE | INTR_EN_IHD_MASK | | ||
2743 | INTR_EN_IHD | i; | ||
2744 | intr_context->intr_read_mask = | ||
2745 | INTR_EN_TYPE_MASK | INTR_EN_INTR_MASK | | ||
2746 | INTR_EN_TYPE_READ | INTR_EN_IHD_MASK | INTR_EN_IHD | | ||
2747 | i; | ||
2748 | |||
2749 | if (i == 0) { | ||
2750 | /* | ||
2751 | * Default queue handles bcast/mcast plus | ||
2752 | * async events. Needs buffers. | ||
2753 | */ | ||
2754 | intr_context->handler = qlge_isr; | ||
2755 | sprintf(intr_context->name, "%s-default-queue", | ||
2756 | qdev->ndev->name); | ||
2757 | } else if (i < qdev->rss_ring_first_cq_id) { | ||
2758 | /* | ||
2759 | * Outbound queue is for outbound completions only. | ||
2760 | */ | ||
2761 | intr_context->handler = qlge_msix_tx_isr; | ||
2762 | sprintf(intr_context->name, "%s-txq-%d", | ||
2763 | qdev->ndev->name, i); | ||
2764 | } else { | ||
2765 | /* | ||
2766 | * Inbound queues handle unicast frames only. | ||
2767 | */ | ||
2768 | intr_context->handler = qlge_msix_rx_isr; | ||
2769 | sprintf(intr_context->name, "%s-rxq-%d", | ||
2770 | qdev->ndev->name, i); | ||
2771 | } | ||
2772 | } | ||
2773 | } else { | ||
2774 | /* | ||
2775 | * All rx_rings use the same intr_context since | ||
2776 | * there is only one vector. | ||
2777 | */ | ||
2778 | intr_context->intr = 0; | ||
2779 | intr_context->qdev = qdev; | ||
2780 | /* | ||
2781 | * We set up each vectors enable/disable/read bits so | ||
2782 | * there's no bit/mask calculations in the critical path. | ||
2783 | */ | ||
2784 | intr_context->intr_en_mask = | ||
2785 | INTR_EN_TYPE_MASK | INTR_EN_INTR_MASK | INTR_EN_TYPE_ENABLE; | ||
2786 | intr_context->intr_dis_mask = | ||
2787 | INTR_EN_TYPE_MASK | INTR_EN_INTR_MASK | | ||
2788 | INTR_EN_TYPE_DISABLE; | ||
2789 | intr_context->intr_read_mask = | ||
2790 | INTR_EN_TYPE_MASK | INTR_EN_INTR_MASK | INTR_EN_TYPE_READ; | ||
2791 | /* | ||
2792 | * Single interrupt means one handler for all rings. | ||
2793 | */ | ||
2794 | intr_context->handler = qlge_isr; | ||
2795 | sprintf(intr_context->name, "%s-single_irq", qdev->ndev->name); | ||
2796 | for (i = 0; i < qdev->rx_ring_count; i++) | ||
2797 | qdev->rx_ring[i].irq = 0; | ||
2798 | } | ||
2799 | } | ||
2800 | |||
2801 | static void ql_free_irq(struct ql_adapter *qdev) | ||
2802 | { | ||
2803 | int i; | ||
2804 | struct intr_context *intr_context = &qdev->intr_context[0]; | ||
2805 | |||
2806 | for (i = 0; i < qdev->intr_count; i++, intr_context++) { | ||
2807 | if (intr_context->hooked) { | ||
2808 | if (test_bit(QL_MSIX_ENABLED, &qdev->flags)) { | ||
2809 | free_irq(qdev->msi_x_entry[i].vector, | ||
2810 | &qdev->rx_ring[i]); | ||
2811 | QPRINTK(qdev, IFDOWN, ERR, | ||
2812 | "freeing msix interrupt %d.\n", i); | ||
2813 | } else { | ||
2814 | free_irq(qdev->pdev->irq, &qdev->rx_ring[0]); | ||
2815 | QPRINTK(qdev, IFDOWN, ERR, | ||
2816 | "freeing msi interrupt %d.\n", i); | ||
2817 | } | ||
2818 | } | ||
2819 | } | ||
2820 | ql_disable_msix(qdev); | ||
2821 | } | ||
2822 | |||
2823 | static int ql_request_irq(struct ql_adapter *qdev) | ||
2824 | { | ||
2825 | int i; | ||
2826 | int status = 0; | ||
2827 | struct pci_dev *pdev = qdev->pdev; | ||
2828 | struct intr_context *intr_context = &qdev->intr_context[0]; | ||
2829 | |||
2830 | ql_resolve_queues_to_irqs(qdev); | ||
2831 | |||
2832 | for (i = 0; i < qdev->intr_count; i++, intr_context++) { | ||
2833 | atomic_set(&intr_context->irq_cnt, 0); | ||
2834 | if (test_bit(QL_MSIX_ENABLED, &qdev->flags)) { | ||
2835 | status = request_irq(qdev->msi_x_entry[i].vector, | ||
2836 | intr_context->handler, | ||
2837 | 0, | ||
2838 | intr_context->name, | ||
2839 | &qdev->rx_ring[i]); | ||
2840 | if (status) { | ||
2841 | QPRINTK(qdev, IFUP, ERR, | ||
2842 | "Failed request for MSIX interrupt %d.\n", | ||
2843 | i); | ||
2844 | goto err_irq; | ||
2845 | } else { | ||
2846 | QPRINTK(qdev, IFUP, INFO, | ||
2847 | "Hooked intr %d, queue type %s%s%s, with name %s.\n", | ||
2848 | i, | ||
2849 | qdev->rx_ring[i].type == | ||
2850 | DEFAULT_Q ? "DEFAULT_Q" : "", | ||
2851 | qdev->rx_ring[i].type == | ||
2852 | TX_Q ? "TX_Q" : "", | ||
2853 | qdev->rx_ring[i].type == | ||
2854 | RX_Q ? "RX_Q" : "", intr_context->name); | ||
2855 | } | ||
2856 | } else { | ||
2857 | QPRINTK(qdev, IFUP, DEBUG, | ||
2858 | "trying msi or legacy interrupts.\n"); | ||
2859 | QPRINTK(qdev, IFUP, DEBUG, | ||
2860 | "%s: irq = %d.\n", __func__, pdev->irq); | ||
2861 | QPRINTK(qdev, IFUP, DEBUG, | ||
2862 | "%s: context->name = %s.\n", __func__, | ||
2863 | intr_context->name); | ||
2864 | QPRINTK(qdev, IFUP, DEBUG, | ||
2865 | "%s: dev_id = 0x%p.\n", __func__, | ||
2866 | &qdev->rx_ring[0]); | ||
2867 | status = | ||
2868 | request_irq(pdev->irq, qlge_isr, | ||
2869 | test_bit(QL_MSI_ENABLED, | ||
2870 | &qdev-> | ||
2871 | flags) ? 0 : IRQF_SHARED, | ||
2872 | intr_context->name, &qdev->rx_ring[0]); | ||
2873 | if (status) | ||
2874 | goto err_irq; | ||
2875 | |||
2876 | QPRINTK(qdev, IFUP, ERR, | ||
2877 | "Hooked intr %d, queue type %s%s%s, with name %s.\n", | ||
2878 | i, | ||
2879 | qdev->rx_ring[0].type == | ||
2880 | DEFAULT_Q ? "DEFAULT_Q" : "", | ||
2881 | qdev->rx_ring[0].type == TX_Q ? "TX_Q" : "", | ||
2882 | qdev->rx_ring[0].type == RX_Q ? "RX_Q" : "", | ||
2883 | intr_context->name); | ||
2884 | } | ||
2885 | intr_context->hooked = 1; | ||
2886 | } | ||
2887 | return status; | ||
2888 | err_irq: | ||
2889 | QPRINTK(qdev, IFUP, ERR, "Failed to get the interrupts!!!/n"); | ||
2890 | ql_free_irq(qdev); | ||
2891 | return status; | ||
2892 | } | ||
2893 | |||
2894 | static int ql_start_rss(struct ql_adapter *qdev) | ||
2895 | { | ||
2896 | struct ricb *ricb = &qdev->ricb; | ||
2897 | int status = 0; | ||
2898 | int i; | ||
2899 | u8 *hash_id = (u8 *) ricb->hash_cq_id; | ||
2900 | |||
2901 | memset((void *)ricb, 0, sizeof(ricb)); | ||
2902 | |||
2903 | ricb->base_cq = qdev->rss_ring_first_cq_id | RSS_L4K; | ||
2904 | ricb->flags = | ||
2905 | (RSS_L6K | RSS_LI | RSS_LB | RSS_LM | RSS_RI4 | RSS_RI6 | RSS_RT4 | | ||
2906 | RSS_RT6); | ||
2907 | ricb->mask = cpu_to_le16(qdev->rss_ring_count - 1); | ||
2908 | |||
2909 | /* | ||
2910 | * Fill out the Indirection Table. | ||
2911 | */ | ||
2912 | for (i = 0; i < 32; i++) | ||
2913 | hash_id[i] = i & 1; | ||
2914 | |||
2915 | /* | ||
2916 | * Random values for the IPv6 and IPv4 Hash Keys. | ||
2917 | */ | ||
2918 | get_random_bytes((void *)&ricb->ipv6_hash_key[0], 40); | ||
2919 | get_random_bytes((void *)&ricb->ipv4_hash_key[0], 16); | ||
2920 | |||
2921 | QPRINTK(qdev, IFUP, INFO, "Initializing RSS.\n"); | ||
2922 | |||
2923 | status = ql_write_cfg(qdev, ricb, sizeof(ricb), CFG_LR, 0); | ||
2924 | if (status) { | ||
2925 | QPRINTK(qdev, IFUP, ERR, "Failed to load RICB.\n"); | ||
2926 | return status; | ||
2927 | } | ||
2928 | QPRINTK(qdev, IFUP, INFO, "Successfully loaded RICB.\n"); | ||
2929 | return status; | ||
2930 | } | ||
2931 | |||
2932 | /* Initialize the frame-to-queue routing. */ | ||
2933 | static int ql_route_initialize(struct ql_adapter *qdev) | ||
2934 | { | ||
2935 | int status = 0; | ||
2936 | int i; | ||
2937 | |||
2938 | /* Clear all the entries in the routing table. */ | ||
2939 | for (i = 0; i < 16; i++) { | ||
2940 | status = ql_set_routing_reg(qdev, i, 0, 0); | ||
2941 | if (status) { | ||
2942 | QPRINTK(qdev, IFUP, ERR, | ||
2943 | "Failed to init routing register for CAM packets.\n"); | ||
2944 | return status; | ||
2945 | } | ||
2946 | } | ||
2947 | |||
2948 | status = ql_set_routing_reg(qdev, RT_IDX_ALL_ERR_SLOT, RT_IDX_ERR, 1); | ||
2949 | if (status) { | ||
2950 | QPRINTK(qdev, IFUP, ERR, | ||
2951 | "Failed to init routing register for error packets.\n"); | ||
2952 | return status; | ||
2953 | } | ||
2954 | status = ql_set_routing_reg(qdev, RT_IDX_BCAST_SLOT, RT_IDX_BCAST, 1); | ||
2955 | if (status) { | ||
2956 | QPRINTK(qdev, IFUP, ERR, | ||
2957 | "Failed to init routing register for broadcast packets.\n"); | ||
2958 | return status; | ||
2959 | } | ||
2960 | /* If we have more than one inbound queue, then turn on RSS in the | ||
2961 | * routing block. | ||
2962 | */ | ||
2963 | if (qdev->rss_ring_count > 1) { | ||
2964 | status = ql_set_routing_reg(qdev, RT_IDX_RSS_MATCH_SLOT, | ||
2965 | RT_IDX_RSS_MATCH, 1); | ||
2966 | if (status) { | ||
2967 | QPRINTK(qdev, IFUP, ERR, | ||
2968 | "Failed to init routing register for MATCH RSS packets.\n"); | ||
2969 | return status; | ||
2970 | } | ||
2971 | } | ||
2972 | |||
2973 | status = ql_set_routing_reg(qdev, RT_IDX_CAM_HIT_SLOT, | ||
2974 | RT_IDX_CAM_HIT, 1); | ||
2975 | if (status) { | ||
2976 | QPRINTK(qdev, IFUP, ERR, | ||
2977 | "Failed to init routing register for CAM packets.\n"); | ||
2978 | return status; | ||
2979 | } | ||
2980 | return status; | ||
2981 | } | ||
2982 | |||
2983 | static int ql_adapter_initialize(struct ql_adapter *qdev) | ||
2984 | { | ||
2985 | u32 value, mask; | ||
2986 | int i; | ||
2987 | int status = 0; | ||
2988 | |||
2989 | /* | ||
2990 | * Set up the System register to halt on errors. | ||
2991 | */ | ||
2992 | value = SYS_EFE | SYS_FAE; | ||
2993 | mask = value << 16; | ||
2994 | ql_write32(qdev, SYS, mask | value); | ||
2995 | |||
2996 | /* Set the default queue. */ | ||
2997 | value = NIC_RCV_CFG_DFQ; | ||
2998 | mask = NIC_RCV_CFG_DFQ_MASK; | ||
2999 | ql_write32(qdev, NIC_RCV_CFG, (mask | value)); | ||
3000 | |||
3001 | /* Set the MPI interrupt to enabled. */ | ||
3002 | ql_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16) | INTR_MASK_PI); | ||
3003 | |||
3004 | /* Enable the function, set pagesize, enable error checking. */ | ||
3005 | value = FSC_FE | FSC_EPC_INBOUND | FSC_EPC_OUTBOUND | | ||
3006 | FSC_EC | FSC_VM_PAGE_4K | FSC_SH; | ||
3007 | |||
3008 | /* Set/clear header splitting. */ | ||
3009 | mask = FSC_VM_PAGESIZE_MASK | | ||
3010 | FSC_DBL_MASK | FSC_DBRST_MASK | (value << 16); | ||
3011 | ql_write32(qdev, FSC, mask | value); | ||
3012 | |||
3013 | ql_write32(qdev, SPLT_HDR, SPLT_HDR_EP | | ||
3014 | min(SMALL_BUFFER_SIZE, MAX_SPLIT_SIZE)); | ||
3015 | |||
3016 | /* Start up the rx queues. */ | ||
3017 | for (i = 0; i < qdev->rx_ring_count; i++) { | ||
3018 | status = ql_start_rx_ring(qdev, &qdev->rx_ring[i]); | ||
3019 | if (status) { | ||
3020 | QPRINTK(qdev, IFUP, ERR, | ||
3021 | "Failed to start rx ring[%d].\n", i); | ||
3022 | return status; | ||
3023 | } | ||
3024 | } | ||
3025 | |||
3026 | /* If there is more than one inbound completion queue | ||
3027 | * then download a RICB to configure RSS. | ||
3028 | */ | ||
3029 | if (qdev->rss_ring_count > 1) { | ||
3030 | status = ql_start_rss(qdev); | ||
3031 | if (status) { | ||
3032 | QPRINTK(qdev, IFUP, ERR, "Failed to start RSS.\n"); | ||
3033 | return status; | ||
3034 | } | ||
3035 | } | ||
3036 | |||
3037 | /* Start up the tx queues. */ | ||
3038 | for (i = 0; i < qdev->tx_ring_count; i++) { | ||
3039 | status = ql_start_tx_ring(qdev, &qdev->tx_ring[i]); | ||
3040 | if (status) { | ||
3041 | QPRINTK(qdev, IFUP, ERR, | ||
3042 | "Failed to start tx ring[%d].\n", i); | ||
3043 | return status; | ||
3044 | } | ||
3045 | } | ||
3046 | |||
3047 | status = ql_port_initialize(qdev); | ||
3048 | if (status) { | ||
3049 | QPRINTK(qdev, IFUP, ERR, "Failed to start port.\n"); | ||
3050 | return status; | ||
3051 | } | ||
3052 | |||
3053 | status = ql_set_mac_addr_reg(qdev, (u8 *) qdev->ndev->perm_addr, | ||
3054 | MAC_ADDR_TYPE_CAM_MAC, qdev->func); | ||
3055 | if (status) { | ||
3056 | QPRINTK(qdev, IFUP, ERR, "Failed to init mac address.\n"); | ||
3057 | return status; | ||
3058 | } | ||
3059 | |||
3060 | status = ql_route_initialize(qdev); | ||
3061 | if (status) { | ||
3062 | QPRINTK(qdev, IFUP, ERR, "Failed to init routing table.\n"); | ||
3063 | return status; | ||
3064 | } | ||
3065 | |||
3066 | /* Start NAPI for the RSS queues. */ | ||
3067 | for (i = qdev->rss_ring_first_cq_id; i < qdev->rx_ring_count; i++) { | ||
3068 | QPRINTK(qdev, IFUP, INFO, "Enabling NAPI for rx_ring[%d].\n", | ||
3069 | i); | ||
3070 | napi_enable(&qdev->rx_ring[i].napi); | ||
3071 | } | ||
3072 | |||
3073 | return status; | ||
3074 | } | ||
3075 | |||
3076 | /* Issue soft reset to chip. */ | ||
3077 | static int ql_adapter_reset(struct ql_adapter *qdev) | ||
3078 | { | ||
3079 | u32 value; | ||
3080 | int max_wait_time; | ||
3081 | int status = 0; | ||
3082 | int resetCnt = 0; | ||
3083 | |||
3084 | #define MAX_RESET_CNT 1 | ||
3085 | issueReset: | ||
3086 | resetCnt++; | ||
3087 | QPRINTK(qdev, IFDOWN, DEBUG, "Issue soft reset to chip.\n"); | ||
3088 | ql_write32(qdev, RST_FO, (RST_FO_FR << 16) | RST_FO_FR); | ||
3089 | /* Wait for reset to complete. */ | ||
3090 | max_wait_time = 3; | ||
3091 | QPRINTK(qdev, IFDOWN, DEBUG, "Wait %d seconds for reset to complete.\n", | ||
3092 | max_wait_time); | ||
3093 | do { | ||
3094 | value = ql_read32(qdev, RST_FO); | ||
3095 | if ((value & RST_FO_FR) == 0) | ||
3096 | break; | ||
3097 | |||
3098 | ssleep(1); | ||
3099 | } while ((--max_wait_time)); | ||
3100 | if (value & RST_FO_FR) { | ||
3101 | QPRINTK(qdev, IFDOWN, ERR, | ||
3102 | "Stuck in SoftReset: FSC_SR:0x%08x\n", value); | ||
3103 | if (resetCnt < MAX_RESET_CNT) | ||
3104 | goto issueReset; | ||
3105 | } | ||
3106 | if (max_wait_time == 0) { | ||
3107 | status = -ETIMEDOUT; | ||
3108 | QPRINTK(qdev, IFDOWN, ERR, | ||
3109 | "ETIMEOUT!!! errored out of resetting the chip!\n"); | ||
3110 | } | ||
3111 | |||
3112 | return status; | ||
3113 | } | ||
3114 | |||
3115 | static void ql_display_dev_info(struct net_device *ndev) | ||
3116 | { | ||
3117 | struct ql_adapter *qdev = (struct ql_adapter *)netdev_priv(ndev); | ||
3118 | |||
3119 | QPRINTK(qdev, PROBE, INFO, | ||
3120 | "Function #%d, NIC Roll %d, NIC Rev = %d, " | ||
3121 | "XG Roll = %d, XG Rev = %d.\n", | ||
3122 | qdev->func, | ||
3123 | qdev->chip_rev_id & 0x0000000f, | ||
3124 | qdev->chip_rev_id >> 4 & 0x0000000f, | ||
3125 | qdev->chip_rev_id >> 8 & 0x0000000f, | ||
3126 | qdev->chip_rev_id >> 12 & 0x0000000f); | ||
3127 | QPRINTK(qdev, PROBE, INFO, | ||
3128 | "MAC address %02x:%02x:%02x:%02x:%02x:%02x\n", | ||
3129 | ndev->dev_addr[0], ndev->dev_addr[1], | ||
3130 | ndev->dev_addr[2], ndev->dev_addr[3], ndev->dev_addr[4], | ||
3131 | ndev->dev_addr[5]); | ||
3132 | } | ||
3133 | |||
3134 | static int ql_adapter_down(struct ql_adapter *qdev) | ||
3135 | { | ||
3136 | struct net_device *ndev = qdev->ndev; | ||
3137 | int i, status = 0; | ||
3138 | struct rx_ring *rx_ring; | ||
3139 | |||
3140 | netif_stop_queue(ndev); | ||
3141 | netif_carrier_off(ndev); | ||
3142 | |||
3143 | cancel_delayed_work_sync(&qdev->asic_reset_work); | ||
3144 | cancel_delayed_work_sync(&qdev->mpi_reset_work); | ||
3145 | cancel_delayed_work_sync(&qdev->mpi_work); | ||
3146 | |||
3147 | /* The default queue at index 0 is always processed in | ||
3148 | * a workqueue. | ||
3149 | */ | ||
3150 | cancel_delayed_work_sync(&qdev->rx_ring[0].rx_work); | ||
3151 | |||
3152 | /* The rest of the rx_rings are processed in | ||
3153 | * a workqueue only if it's a single interrupt | ||
3154 | * environment (MSI/Legacy). | ||
3155 | */ | ||
3156 | for (i = 1; i > qdev->rx_ring_count; i++) { | ||
3157 | rx_ring = &qdev->rx_ring[i]; | ||
3158 | /* Only the RSS rings use NAPI on multi irq | ||
3159 | * environment. Outbound completion processing | ||
3160 | * is done in interrupt context. | ||
3161 | */ | ||
3162 | if (i >= qdev->rss_ring_first_cq_id) { | ||
3163 | napi_disable(&rx_ring->napi); | ||
3164 | } else { | ||
3165 | cancel_delayed_work_sync(&rx_ring->rx_work); | ||
3166 | } | ||
3167 | } | ||
3168 | |||
3169 | clear_bit(QL_ADAPTER_UP, &qdev->flags); | ||
3170 | |||
3171 | ql_disable_interrupts(qdev); | ||
3172 | |||
3173 | ql_tx_ring_clean(qdev); | ||
3174 | |||
3175 | spin_lock(&qdev->hw_lock); | ||
3176 | status = ql_adapter_reset(qdev); | ||
3177 | if (status) | ||
3178 | QPRINTK(qdev, IFDOWN, ERR, "reset(func #%d) FAILED!\n", | ||
3179 | qdev->func); | ||
3180 | spin_unlock(&qdev->hw_lock); | ||
3181 | return status; | ||
3182 | } | ||
3183 | |||
3184 | static int ql_adapter_up(struct ql_adapter *qdev) | ||
3185 | { | ||
3186 | int err = 0; | ||
3187 | |||
3188 | spin_lock(&qdev->hw_lock); | ||
3189 | err = ql_adapter_initialize(qdev); | ||
3190 | if (err) { | ||
3191 | QPRINTK(qdev, IFUP, INFO, "Unable to initialize adapter.\n"); | ||
3192 | spin_unlock(&qdev->hw_lock); | ||
3193 | goto err_init; | ||
3194 | } | ||
3195 | spin_unlock(&qdev->hw_lock); | ||
3196 | set_bit(QL_ADAPTER_UP, &qdev->flags); | ||
3197 | ql_enable_interrupts(qdev); | ||
3198 | ql_enable_all_completion_interrupts(qdev); | ||
3199 | if ((ql_read32(qdev, STS) & qdev->port_init)) { | ||
3200 | netif_carrier_on(qdev->ndev); | ||
3201 | netif_start_queue(qdev->ndev); | ||
3202 | } | ||
3203 | |||
3204 | return 0; | ||
3205 | err_init: | ||
3206 | ql_adapter_reset(qdev); | ||
3207 | return err; | ||
3208 | } | ||
3209 | |||
3210 | static int ql_cycle_adapter(struct ql_adapter *qdev) | ||
3211 | { | ||
3212 | int status; | ||
3213 | |||
3214 | status = ql_adapter_down(qdev); | ||
3215 | if (status) | ||
3216 | goto error; | ||
3217 | |||
3218 | status = ql_adapter_up(qdev); | ||
3219 | if (status) | ||
3220 | goto error; | ||
3221 | |||
3222 | return status; | ||
3223 | error: | ||
3224 | QPRINTK(qdev, IFUP, ALERT, | ||
3225 | "Driver up/down cycle failed, closing device\n"); | ||
3226 | rtnl_lock(); | ||
3227 | dev_close(qdev->ndev); | ||
3228 | rtnl_unlock(); | ||
3229 | return status; | ||
3230 | } | ||
3231 | |||
3232 | static void ql_release_adapter_resources(struct ql_adapter *qdev) | ||
3233 | { | ||
3234 | ql_free_mem_resources(qdev); | ||
3235 | ql_free_irq(qdev); | ||
3236 | } | ||
3237 | |||
3238 | static int ql_get_adapter_resources(struct ql_adapter *qdev) | ||
3239 | { | ||
3240 | int status = 0; | ||
3241 | |||
3242 | if (ql_alloc_mem_resources(qdev)) { | ||
3243 | QPRINTK(qdev, IFUP, ERR, "Unable to allocate memory.\n"); | ||
3244 | return -ENOMEM; | ||
3245 | } | ||
3246 | status = ql_request_irq(qdev); | ||
3247 | if (status) | ||
3248 | goto err_irq; | ||
3249 | return status; | ||
3250 | err_irq: | ||
3251 | ql_free_mem_resources(qdev); | ||
3252 | return status; | ||
3253 | } | ||
3254 | |||
3255 | static int qlge_close(struct net_device *ndev) | ||
3256 | { | ||
3257 | struct ql_adapter *qdev = netdev_priv(ndev); | ||
3258 | |||
3259 | /* | ||
3260 | * Wait for device to recover from a reset. | ||
3261 | * (Rarely happens, but possible.) | ||
3262 | */ | ||
3263 | while (!test_bit(QL_ADAPTER_UP, &qdev->flags)) | ||
3264 | msleep(1); | ||
3265 | ql_adapter_down(qdev); | ||
3266 | ql_release_adapter_resources(qdev); | ||
3267 | ql_free_ring_cb(qdev); | ||
3268 | return 0; | ||
3269 | } | ||
3270 | |||
3271 | static int ql_configure_rings(struct ql_adapter *qdev) | ||
3272 | { | ||
3273 | int i; | ||
3274 | struct rx_ring *rx_ring; | ||
3275 | struct tx_ring *tx_ring; | ||
3276 | int cpu_cnt = num_online_cpus(); | ||
3277 | |||
3278 | /* | ||
3279 | * For each processor present we allocate one | ||
3280 | * rx_ring for outbound completions, and one | ||
3281 | * rx_ring for inbound completions. Plus there is | ||
3282 | * always the one default queue. For the CPU | ||
3283 | * counts we end up with the following rx_rings: | ||
3284 | * rx_ring count = | ||
3285 | * one default queue + | ||
3286 | * (CPU count * outbound completion rx_ring) + | ||
3287 | * (CPU count * inbound (RSS) completion rx_ring) | ||
3288 | * To keep it simple we limit the total number of | ||
3289 | * queues to < 32, so we truncate CPU to 8. | ||
3290 | * This limitation can be removed when requested. | ||
3291 | */ | ||
3292 | |||
3293 | if (cpu_cnt > 8) | ||
3294 | cpu_cnt = 8; | ||
3295 | |||
3296 | /* | ||
3297 | * rx_ring[0] is always the default queue. | ||
3298 | */ | ||
3299 | /* Allocate outbound completion ring for each CPU. */ | ||
3300 | qdev->tx_ring_count = cpu_cnt; | ||
3301 | /* Allocate inbound completion (RSS) ring for each CPU. */ | ||
3302 | qdev->rss_ring_count = cpu_cnt; | ||
3303 | /* cq_id for the first inbound ring handler. */ | ||
3304 | qdev->rss_ring_first_cq_id = cpu_cnt + 1; | ||
3305 | /* | ||
3306 | * qdev->rx_ring_count: | ||
3307 | * Total number of rx_rings. This includes the one | ||
3308 | * default queue, a number of outbound completion | ||
3309 | * handler rx_rings, and the number of inbound | ||
3310 | * completion handler rx_rings. | ||
3311 | */ | ||
3312 | qdev->rx_ring_count = qdev->tx_ring_count + qdev->rss_ring_count + 1; | ||
3313 | |||
3314 | if (ql_alloc_ring_cb(qdev)) | ||
3315 | return -ENOMEM; | ||
3316 | |||
3317 | for (i = 0; i < qdev->tx_ring_count; i++) { | ||
3318 | tx_ring = &qdev->tx_ring[i]; | ||
3319 | memset((void *)tx_ring, 0, sizeof(tx_ring)); | ||
3320 | tx_ring->qdev = qdev; | ||
3321 | tx_ring->wq_id = i; | ||
3322 | tx_ring->wq_len = qdev->tx_ring_size; | ||
3323 | tx_ring->wq_size = | ||
3324 | tx_ring->wq_len * sizeof(struct ob_mac_iocb_req); | ||
3325 | |||
3326 | /* | ||
3327 | * The completion queue ID for the tx rings start | ||
3328 | * immediately after the default Q ID, which is zero. | ||
3329 | */ | ||
3330 | tx_ring->cq_id = i + 1; | ||
3331 | } | ||
3332 | |||
3333 | for (i = 0; i < qdev->rx_ring_count; i++) { | ||
3334 | rx_ring = &qdev->rx_ring[i]; | ||
3335 | memset((void *)rx_ring, 0, sizeof(rx_ring)); | ||
3336 | rx_ring->qdev = qdev; | ||
3337 | rx_ring->cq_id = i; | ||
3338 | rx_ring->cpu = i % cpu_cnt; /* CPU to run handler on. */ | ||
3339 | if (i == 0) { /* Default queue at index 0. */ | ||
3340 | /* | ||
3341 | * Default queue handles bcast/mcast plus | ||
3342 | * async events. Needs buffers. | ||
3343 | */ | ||
3344 | rx_ring->cq_len = qdev->rx_ring_size; | ||
3345 | rx_ring->cq_size = | ||
3346 | rx_ring->cq_len * sizeof(struct ql_net_rsp_iocb); | ||
3347 | rx_ring->lbq_len = NUM_LARGE_BUFFERS; | ||
3348 | rx_ring->lbq_size = | ||
3349 | rx_ring->lbq_len * sizeof(struct bq_element); | ||
3350 | rx_ring->lbq_buf_size = LARGE_BUFFER_SIZE; | ||
3351 | rx_ring->sbq_len = NUM_SMALL_BUFFERS; | ||
3352 | rx_ring->sbq_size = | ||
3353 | rx_ring->sbq_len * sizeof(struct bq_element); | ||
3354 | rx_ring->sbq_buf_size = SMALL_BUFFER_SIZE * 2; | ||
3355 | rx_ring->type = DEFAULT_Q; | ||
3356 | } else if (i < qdev->rss_ring_first_cq_id) { | ||
3357 | /* | ||
3358 | * Outbound queue handles outbound completions only. | ||
3359 | */ | ||
3360 | /* outbound cq is same size as tx_ring it services. */ | ||
3361 | rx_ring->cq_len = qdev->tx_ring_size; | ||
3362 | rx_ring->cq_size = | ||
3363 | rx_ring->cq_len * sizeof(struct ql_net_rsp_iocb); | ||
3364 | rx_ring->lbq_len = 0; | ||
3365 | rx_ring->lbq_size = 0; | ||
3366 | rx_ring->lbq_buf_size = 0; | ||
3367 | rx_ring->sbq_len = 0; | ||
3368 | rx_ring->sbq_size = 0; | ||
3369 | rx_ring->sbq_buf_size = 0; | ||
3370 | rx_ring->type = TX_Q; | ||
3371 | } else { /* Inbound completions (RSS) queues */ | ||
3372 | /* | ||
3373 | * Inbound queues handle unicast frames only. | ||
3374 | */ | ||
3375 | rx_ring->cq_len = qdev->rx_ring_size; | ||
3376 | rx_ring->cq_size = | ||
3377 | rx_ring->cq_len * sizeof(struct ql_net_rsp_iocb); | ||
3378 | rx_ring->lbq_len = NUM_LARGE_BUFFERS; | ||
3379 | rx_ring->lbq_size = | ||
3380 | rx_ring->lbq_len * sizeof(struct bq_element); | ||
3381 | rx_ring->lbq_buf_size = LARGE_BUFFER_SIZE; | ||
3382 | rx_ring->sbq_len = NUM_SMALL_BUFFERS; | ||
3383 | rx_ring->sbq_size = | ||
3384 | rx_ring->sbq_len * sizeof(struct bq_element); | ||
3385 | rx_ring->sbq_buf_size = SMALL_BUFFER_SIZE * 2; | ||
3386 | rx_ring->type = RX_Q; | ||
3387 | } | ||
3388 | } | ||
3389 | return 0; | ||
3390 | } | ||
3391 | |||
3392 | static int qlge_open(struct net_device *ndev) | ||
3393 | { | ||
3394 | int err = 0; | ||
3395 | struct ql_adapter *qdev = netdev_priv(ndev); | ||
3396 | |||
3397 | err = ql_configure_rings(qdev); | ||
3398 | if (err) | ||
3399 | return err; | ||
3400 | |||
3401 | err = ql_get_adapter_resources(qdev); | ||
3402 | if (err) | ||
3403 | goto error_up; | ||
3404 | |||
3405 | err = ql_adapter_up(qdev); | ||
3406 | if (err) | ||
3407 | goto error_up; | ||
3408 | |||
3409 | return err; | ||
3410 | |||
3411 | error_up: | ||
3412 | ql_release_adapter_resources(qdev); | ||
3413 | ql_free_ring_cb(qdev); | ||
3414 | return err; | ||
3415 | } | ||
3416 | |||
3417 | static int qlge_change_mtu(struct net_device *ndev, int new_mtu) | ||
3418 | { | ||
3419 | struct ql_adapter *qdev = netdev_priv(ndev); | ||
3420 | |||
3421 | if (ndev->mtu == 1500 && new_mtu == 9000) { | ||
3422 | QPRINTK(qdev, IFUP, ERR, "Changing to jumbo MTU.\n"); | ||
3423 | } else if (ndev->mtu == 9000 && new_mtu == 1500) { | ||
3424 | QPRINTK(qdev, IFUP, ERR, "Changing to normal MTU.\n"); | ||
3425 | } else if ((ndev->mtu == 1500 && new_mtu == 1500) || | ||
3426 | (ndev->mtu == 9000 && new_mtu == 9000)) { | ||
3427 | return 0; | ||
3428 | } else | ||
3429 | return -EINVAL; | ||
3430 | ndev->mtu = new_mtu; | ||
3431 | return 0; | ||
3432 | } | ||
3433 | |||
3434 | static struct net_device_stats *qlge_get_stats(struct net_device | ||
3435 | *ndev) | ||
3436 | { | ||
3437 | struct ql_adapter *qdev = netdev_priv(ndev); | ||
3438 | return &qdev->stats; | ||
3439 | } | ||
3440 | |||
3441 | static void qlge_set_multicast_list(struct net_device *ndev) | ||
3442 | { | ||
3443 | struct ql_adapter *qdev = (struct ql_adapter *)netdev_priv(ndev); | ||
3444 | struct dev_mc_list *mc_ptr; | ||
3445 | int i; | ||
3446 | |||
3447 | spin_lock(&qdev->hw_lock); | ||
3448 | /* | ||
3449 | * Set or clear promiscuous mode if a | ||
3450 | * transition is taking place. | ||
3451 | */ | ||
3452 | if (ndev->flags & IFF_PROMISC) { | ||
3453 | if (!test_bit(QL_PROMISCUOUS, &qdev->flags)) { | ||
3454 | if (ql_set_routing_reg | ||
3455 | (qdev, RT_IDX_PROMISCUOUS_SLOT, RT_IDX_VALID, 1)) { | ||
3456 | QPRINTK(qdev, HW, ERR, | ||
3457 | "Failed to set promiscous mode.\n"); | ||
3458 | } else { | ||
3459 | set_bit(QL_PROMISCUOUS, &qdev->flags); | ||
3460 | } | ||
3461 | } | ||
3462 | } else { | ||
3463 | if (test_bit(QL_PROMISCUOUS, &qdev->flags)) { | ||
3464 | if (ql_set_routing_reg | ||
3465 | (qdev, RT_IDX_PROMISCUOUS_SLOT, RT_IDX_VALID, 0)) { | ||
3466 | QPRINTK(qdev, HW, ERR, | ||
3467 | "Failed to clear promiscous mode.\n"); | ||
3468 | } else { | ||
3469 | clear_bit(QL_PROMISCUOUS, &qdev->flags); | ||
3470 | } | ||
3471 | } | ||
3472 | } | ||
3473 | |||
3474 | /* | ||
3475 | * Set or clear all multicast mode if a | ||
3476 | * transition is taking place. | ||
3477 | */ | ||
3478 | if ((ndev->flags & IFF_ALLMULTI) || | ||
3479 | (ndev->mc_count > MAX_MULTICAST_ENTRIES)) { | ||
3480 | if (!test_bit(QL_ALLMULTI, &qdev->flags)) { | ||
3481 | if (ql_set_routing_reg | ||
3482 | (qdev, RT_IDX_ALLMULTI_SLOT, RT_IDX_MCAST, 1)) { | ||
3483 | QPRINTK(qdev, HW, ERR, | ||
3484 | "Failed to set all-multi mode.\n"); | ||
3485 | } else { | ||
3486 | set_bit(QL_ALLMULTI, &qdev->flags); | ||
3487 | } | ||
3488 | } | ||
3489 | } else { | ||
3490 | if (test_bit(QL_ALLMULTI, &qdev->flags)) { | ||
3491 | if (ql_set_routing_reg | ||
3492 | (qdev, RT_IDX_ALLMULTI_SLOT, RT_IDX_MCAST, 0)) { | ||
3493 | QPRINTK(qdev, HW, ERR, | ||
3494 | "Failed to clear all-multi mode.\n"); | ||
3495 | } else { | ||
3496 | clear_bit(QL_ALLMULTI, &qdev->flags); | ||
3497 | } | ||
3498 | } | ||
3499 | } | ||
3500 | |||
3501 | if (ndev->mc_count) { | ||
3502 | for (i = 0, mc_ptr = ndev->mc_list; mc_ptr; | ||
3503 | i++, mc_ptr = mc_ptr->next) | ||
3504 | if (ql_set_mac_addr_reg(qdev, (u8 *) mc_ptr->dmi_addr, | ||
3505 | MAC_ADDR_TYPE_MULTI_MAC, i)) { | ||
3506 | QPRINTK(qdev, HW, ERR, | ||
3507 | "Failed to loadmulticast address.\n"); | ||
3508 | goto exit; | ||
3509 | } | ||
3510 | if (ql_set_routing_reg | ||
3511 | (qdev, RT_IDX_MCAST_MATCH_SLOT, RT_IDX_MCAST_MATCH, 1)) { | ||
3512 | QPRINTK(qdev, HW, ERR, | ||
3513 | "Failed to set multicast match mode.\n"); | ||
3514 | } else { | ||
3515 | set_bit(QL_ALLMULTI, &qdev->flags); | ||
3516 | } | ||
3517 | } | ||
3518 | exit: | ||
3519 | spin_unlock(&qdev->hw_lock); | ||
3520 | } | ||
3521 | |||
3522 | static int qlge_set_mac_address(struct net_device *ndev, void *p) | ||
3523 | { | ||
3524 | struct ql_adapter *qdev = (struct ql_adapter *)netdev_priv(ndev); | ||
3525 | struct sockaddr *addr = p; | ||
3526 | |||
3527 | if (netif_running(ndev)) | ||
3528 | return -EBUSY; | ||
3529 | |||
3530 | if (!is_valid_ether_addr(addr->sa_data)) | ||
3531 | return -EADDRNOTAVAIL; | ||
3532 | memcpy(ndev->dev_addr, addr->sa_data, ndev->addr_len); | ||
3533 | |||
3534 | spin_lock(&qdev->hw_lock); | ||
3535 | if (ql_set_mac_addr_reg(qdev, (u8 *) ndev->dev_addr, | ||
3536 | MAC_ADDR_TYPE_CAM_MAC, qdev->func)) {/* Unicast */ | ||
3537 | QPRINTK(qdev, HW, ERR, "Failed to load MAC address.\n"); | ||
3538 | return -1; | ||
3539 | } | ||
3540 | spin_unlock(&qdev->hw_lock); | ||
3541 | |||
3542 | return 0; | ||
3543 | } | ||
3544 | |||
3545 | static void qlge_tx_timeout(struct net_device *ndev) | ||
3546 | { | ||
3547 | struct ql_adapter *qdev = (struct ql_adapter *)netdev_priv(ndev); | ||
3548 | queue_delayed_work(qdev->workqueue, &qdev->asic_reset_work, 0); | ||
3549 | } | ||
3550 | |||
3551 | static void ql_asic_reset_work(struct work_struct *work) | ||
3552 | { | ||
3553 | struct ql_adapter *qdev = | ||
3554 | container_of(work, struct ql_adapter, asic_reset_work.work); | ||
3555 | ql_cycle_adapter(qdev); | ||
3556 | } | ||
3557 | |||
3558 | static void ql_get_board_info(struct ql_adapter *qdev) | ||
3559 | { | ||
3560 | qdev->func = | ||
3561 | (ql_read32(qdev, STS) & STS_FUNC_ID_MASK) >> STS_FUNC_ID_SHIFT; | ||
3562 | if (qdev->func) { | ||
3563 | qdev->xg_sem_mask = SEM_XGMAC1_MASK; | ||
3564 | qdev->port_link_up = STS_PL1; | ||
3565 | qdev->port_init = STS_PI1; | ||
3566 | qdev->mailbox_in = PROC_ADDR_MPI_RISC | PROC_ADDR_FUNC2_MBI; | ||
3567 | qdev->mailbox_out = PROC_ADDR_MPI_RISC | PROC_ADDR_FUNC2_MBO; | ||
3568 | } else { | ||
3569 | qdev->xg_sem_mask = SEM_XGMAC0_MASK; | ||
3570 | qdev->port_link_up = STS_PL0; | ||
3571 | qdev->port_init = STS_PI0; | ||
3572 | qdev->mailbox_in = PROC_ADDR_MPI_RISC | PROC_ADDR_FUNC0_MBI; | ||
3573 | qdev->mailbox_out = PROC_ADDR_MPI_RISC | PROC_ADDR_FUNC0_MBO; | ||
3574 | } | ||
3575 | qdev->chip_rev_id = ql_read32(qdev, REV_ID); | ||
3576 | } | ||
3577 | |||
3578 | static void ql_release_all(struct pci_dev *pdev) | ||
3579 | { | ||
3580 | struct net_device *ndev = pci_get_drvdata(pdev); | ||
3581 | struct ql_adapter *qdev = netdev_priv(ndev); | ||
3582 | |||
3583 | if (qdev->workqueue) { | ||
3584 | destroy_workqueue(qdev->workqueue); | ||
3585 | qdev->workqueue = NULL; | ||
3586 | } | ||
3587 | if (qdev->q_workqueue) { | ||
3588 | destroy_workqueue(qdev->q_workqueue); | ||
3589 | qdev->q_workqueue = NULL; | ||
3590 | } | ||
3591 | if (qdev->reg_base) | ||
3592 | iounmap((void *)qdev->reg_base); | ||
3593 | if (qdev->doorbell_area) | ||
3594 | iounmap(qdev->doorbell_area); | ||
3595 | pci_release_regions(pdev); | ||
3596 | pci_set_drvdata(pdev, NULL); | ||
3597 | } | ||
3598 | |||
3599 | static int __devinit ql_init_device(struct pci_dev *pdev, | ||
3600 | struct net_device *ndev, int cards_found) | ||
3601 | { | ||
3602 | struct ql_adapter *qdev = netdev_priv(ndev); | ||
3603 | int pos, err = 0; | ||
3604 | u16 val16; | ||
3605 | |||
3606 | memset((void *)qdev, 0, sizeof(qdev)); | ||
3607 | err = pci_enable_device(pdev); | ||
3608 | if (err) { | ||
3609 | dev_err(&pdev->dev, "PCI device enable failed.\n"); | ||
3610 | return err; | ||
3611 | } | ||
3612 | |||
3613 | pos = pci_find_capability(pdev, PCI_CAP_ID_EXP); | ||
3614 | if (pos <= 0) { | ||
3615 | dev_err(&pdev->dev, PFX "Cannot find PCI Express capability, " | ||
3616 | "aborting.\n"); | ||
3617 | goto err_out; | ||
3618 | } else { | ||
3619 | pci_read_config_word(pdev, pos + PCI_EXP_DEVCTL, &val16); | ||
3620 | val16 &= ~PCI_EXP_DEVCTL_NOSNOOP_EN; | ||
3621 | val16 |= (PCI_EXP_DEVCTL_CERE | | ||
3622 | PCI_EXP_DEVCTL_NFERE | | ||
3623 | PCI_EXP_DEVCTL_FERE | PCI_EXP_DEVCTL_URRE); | ||
3624 | pci_write_config_word(pdev, pos + PCI_EXP_DEVCTL, val16); | ||
3625 | } | ||
3626 | |||
3627 | err = pci_request_regions(pdev, DRV_NAME); | ||
3628 | if (err) { | ||
3629 | dev_err(&pdev->dev, "PCI region request failed.\n"); | ||
3630 | goto err_out; | ||
3631 | } | ||
3632 | |||
3633 | pci_set_master(pdev); | ||
3634 | if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) { | ||
3635 | set_bit(QL_DMA64, &qdev->flags); | ||
3636 | err = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK); | ||
3637 | } else { | ||
3638 | err = pci_set_dma_mask(pdev, DMA_32BIT_MASK); | ||
3639 | if (!err) | ||
3640 | err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); | ||
3641 | } | ||
3642 | |||
3643 | if (err) { | ||
3644 | dev_err(&pdev->dev, "No usable DMA configuration.\n"); | ||
3645 | goto err_out; | ||
3646 | } | ||
3647 | |||
3648 | pci_set_drvdata(pdev, ndev); | ||
3649 | qdev->reg_base = | ||
3650 | ioremap_nocache(pci_resource_start(pdev, 1), | ||
3651 | pci_resource_len(pdev, 1)); | ||
3652 | if (!qdev->reg_base) { | ||
3653 | dev_err(&pdev->dev, "Register mapping failed.\n"); | ||
3654 | err = -ENOMEM; | ||
3655 | goto err_out; | ||
3656 | } | ||
3657 | |||
3658 | qdev->doorbell_area_size = pci_resource_len(pdev, 3); | ||
3659 | qdev->doorbell_area = | ||
3660 | ioremap_nocache(pci_resource_start(pdev, 3), | ||
3661 | pci_resource_len(pdev, 3)); | ||
3662 | if (!qdev->doorbell_area) { | ||
3663 | dev_err(&pdev->dev, "Doorbell register mapping failed.\n"); | ||
3664 | err = -ENOMEM; | ||
3665 | goto err_out; | ||
3666 | } | ||
3667 | |||
3668 | ql_get_board_info(qdev); | ||
3669 | qdev->ndev = ndev; | ||
3670 | qdev->pdev = pdev; | ||
3671 | qdev->msg_enable = netif_msg_init(debug, default_msg); | ||
3672 | spin_lock_init(&qdev->hw_lock); | ||
3673 | spin_lock_init(&qdev->stats_lock); | ||
3674 | |||
3675 | /* make sure the EEPROM is good */ | ||
3676 | err = ql_get_flash_params(qdev); | ||
3677 | if (err) { | ||
3678 | dev_err(&pdev->dev, "Invalid FLASH.\n"); | ||
3679 | goto err_out; | ||
3680 | } | ||
3681 | |||
3682 | if (!is_valid_ether_addr(qdev->flash.mac_addr)) | ||
3683 | goto err_out; | ||
3684 | |||
3685 | memcpy(ndev->dev_addr, qdev->flash.mac_addr, ndev->addr_len); | ||
3686 | memcpy(ndev->perm_addr, ndev->dev_addr, ndev->addr_len); | ||
3687 | |||
3688 | /* Set up the default ring sizes. */ | ||
3689 | qdev->tx_ring_size = NUM_TX_RING_ENTRIES; | ||
3690 | qdev->rx_ring_size = NUM_RX_RING_ENTRIES; | ||
3691 | |||
3692 | /* Set up the coalescing parameters. */ | ||
3693 | qdev->rx_coalesce_usecs = DFLT_COALESCE_WAIT; | ||
3694 | qdev->tx_coalesce_usecs = DFLT_COALESCE_WAIT; | ||
3695 | qdev->rx_max_coalesced_frames = DFLT_INTER_FRAME_WAIT; | ||
3696 | qdev->tx_max_coalesced_frames = DFLT_INTER_FRAME_WAIT; | ||
3697 | |||
3698 | /* | ||
3699 | * Set up the operating parameters. | ||
3700 | */ | ||
3701 | qdev->rx_csum = 1; | ||
3702 | |||
3703 | qdev->q_workqueue = create_workqueue(ndev->name); | ||
3704 | qdev->workqueue = create_singlethread_workqueue(ndev->name); | ||
3705 | INIT_DELAYED_WORK(&qdev->asic_reset_work, ql_asic_reset_work); | ||
3706 | INIT_DELAYED_WORK(&qdev->mpi_reset_work, ql_mpi_reset_work); | ||
3707 | INIT_DELAYED_WORK(&qdev->mpi_work, ql_mpi_work); | ||
3708 | |||
3709 | if (!cards_found) { | ||
3710 | dev_info(&pdev->dev, "%s\n", DRV_STRING); | ||
3711 | dev_info(&pdev->dev, "Driver name: %s, Version: %s.\n", | ||
3712 | DRV_NAME, DRV_VERSION); | ||
3713 | } | ||
3714 | return 0; | ||
3715 | err_out: | ||
3716 | ql_release_all(pdev); | ||
3717 | pci_disable_device(pdev); | ||
3718 | return err; | ||
3719 | } | ||
3720 | |||
3721 | static int __devinit qlge_probe(struct pci_dev *pdev, | ||
3722 | const struct pci_device_id *pci_entry) | ||
3723 | { | ||
3724 | struct net_device *ndev = NULL; | ||
3725 | struct ql_adapter *qdev = NULL; | ||
3726 | static int cards_found = 0; | ||
3727 | int err = 0; | ||
3728 | |||
3729 | ndev = alloc_etherdev(sizeof(struct ql_adapter)); | ||
3730 | if (!ndev) | ||
3731 | return -ENOMEM; | ||
3732 | |||
3733 | err = ql_init_device(pdev, ndev, cards_found); | ||
3734 | if (err < 0) { | ||
3735 | free_netdev(ndev); | ||
3736 | return err; | ||
3737 | } | ||
3738 | |||
3739 | qdev = netdev_priv(ndev); | ||
3740 | SET_NETDEV_DEV(ndev, &pdev->dev); | ||
3741 | ndev->features = (0 | ||
3742 | | NETIF_F_IP_CSUM | ||
3743 | | NETIF_F_SG | ||
3744 | | NETIF_F_TSO | ||
3745 | | NETIF_F_TSO6 | ||
3746 | | NETIF_F_TSO_ECN | ||
3747 | | NETIF_F_HW_VLAN_TX | ||
3748 | | NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_FILTER); | ||
3749 | |||
3750 | if (test_bit(QL_DMA64, &qdev->flags)) | ||
3751 | ndev->features |= NETIF_F_HIGHDMA; | ||
3752 | |||
3753 | /* | ||
3754 | * Set up net_device structure. | ||
3755 | */ | ||
3756 | ndev->tx_queue_len = qdev->tx_ring_size; | ||
3757 | ndev->irq = pdev->irq; | ||
3758 | ndev->open = qlge_open; | ||
3759 | ndev->stop = qlge_close; | ||
3760 | ndev->hard_start_xmit = qlge_send; | ||
3761 | SET_ETHTOOL_OPS(ndev, &qlge_ethtool_ops); | ||
3762 | ndev->change_mtu = qlge_change_mtu; | ||
3763 | ndev->get_stats = qlge_get_stats; | ||
3764 | ndev->set_multicast_list = qlge_set_multicast_list; | ||
3765 | ndev->set_mac_address = qlge_set_mac_address; | ||
3766 | ndev->tx_timeout = qlge_tx_timeout; | ||
3767 | ndev->watchdog_timeo = 10 * HZ; | ||
3768 | ndev->vlan_rx_register = ql_vlan_rx_register; | ||
3769 | ndev->vlan_rx_add_vid = ql_vlan_rx_add_vid; | ||
3770 | ndev->vlan_rx_kill_vid = ql_vlan_rx_kill_vid; | ||
3771 | err = register_netdev(ndev); | ||
3772 | if (err) { | ||
3773 | dev_err(&pdev->dev, "net device registration failed.\n"); | ||
3774 | ql_release_all(pdev); | ||
3775 | pci_disable_device(pdev); | ||
3776 | return err; | ||
3777 | } | ||
3778 | netif_carrier_off(ndev); | ||
3779 | netif_stop_queue(ndev); | ||
3780 | ql_display_dev_info(ndev); | ||
3781 | cards_found++; | ||
3782 | return 0; | ||
3783 | } | ||
3784 | |||
3785 | static void __devexit qlge_remove(struct pci_dev *pdev) | ||
3786 | { | ||
3787 | struct net_device *ndev = pci_get_drvdata(pdev); | ||
3788 | unregister_netdev(ndev); | ||
3789 | ql_release_all(pdev); | ||
3790 | pci_disable_device(pdev); | ||
3791 | free_netdev(ndev); | ||
3792 | } | ||
3793 | |||
3794 | /* | ||
3795 | * This callback is called by the PCI subsystem whenever | ||
3796 | * a PCI bus error is detected. | ||
3797 | */ | ||
3798 | static pci_ers_result_t qlge_io_error_detected(struct pci_dev *pdev, | ||
3799 | enum pci_channel_state state) | ||
3800 | { | ||
3801 | struct net_device *ndev = pci_get_drvdata(pdev); | ||
3802 | struct ql_adapter *qdev = netdev_priv(ndev); | ||
3803 | |||
3804 | if (netif_running(ndev)) | ||
3805 | ql_adapter_down(qdev); | ||
3806 | |||
3807 | pci_disable_device(pdev); | ||
3808 | |||
3809 | /* Request a slot reset. */ | ||
3810 | return PCI_ERS_RESULT_NEED_RESET; | ||
3811 | } | ||
3812 | |||
3813 | /* | ||
3814 | * This callback is called after the PCI buss has been reset. | ||
3815 | * Basically, this tries to restart the card from scratch. | ||
3816 | * This is a shortened version of the device probe/discovery code, | ||
3817 | * it resembles the first-half of the () routine. | ||
3818 | */ | ||
3819 | static pci_ers_result_t qlge_io_slot_reset(struct pci_dev *pdev) | ||
3820 | { | ||
3821 | struct net_device *ndev = pci_get_drvdata(pdev); | ||
3822 | struct ql_adapter *qdev = netdev_priv(ndev); | ||
3823 | |||
3824 | if (pci_enable_device(pdev)) { | ||
3825 | QPRINTK(qdev, IFUP, ERR, | ||
3826 | "Cannot re-enable PCI device after reset.\n"); | ||
3827 | return PCI_ERS_RESULT_DISCONNECT; | ||
3828 | } | ||
3829 | |||
3830 | pci_set_master(pdev); | ||
3831 | |||
3832 | netif_carrier_off(ndev); | ||
3833 | netif_stop_queue(ndev); | ||
3834 | ql_adapter_reset(qdev); | ||
3835 | |||
3836 | /* Make sure the EEPROM is good */ | ||
3837 | memcpy(ndev->perm_addr, ndev->dev_addr, ndev->addr_len); | ||
3838 | |||
3839 | if (!is_valid_ether_addr(ndev->perm_addr)) { | ||
3840 | QPRINTK(qdev, IFUP, ERR, "After reset, invalid MAC address.\n"); | ||
3841 | return PCI_ERS_RESULT_DISCONNECT; | ||
3842 | } | ||
3843 | |||
3844 | return PCI_ERS_RESULT_RECOVERED; | ||
3845 | } | ||
3846 | |||
3847 | static void qlge_io_resume(struct pci_dev *pdev) | ||
3848 | { | ||
3849 | struct net_device *ndev = pci_get_drvdata(pdev); | ||
3850 | struct ql_adapter *qdev = netdev_priv(ndev); | ||
3851 | |||
3852 | pci_set_master(pdev); | ||
3853 | |||
3854 | if (netif_running(ndev)) { | ||
3855 | if (ql_adapter_up(qdev)) { | ||
3856 | QPRINTK(qdev, IFUP, ERR, | ||
3857 | "Device initialization failed after reset.\n"); | ||
3858 | return; | ||
3859 | } | ||
3860 | } | ||
3861 | |||
3862 | netif_device_attach(ndev); | ||
3863 | } | ||
3864 | |||
3865 | static struct pci_error_handlers qlge_err_handler = { | ||
3866 | .error_detected = qlge_io_error_detected, | ||
3867 | .slot_reset = qlge_io_slot_reset, | ||
3868 | .resume = qlge_io_resume, | ||
3869 | }; | ||
3870 | |||
3871 | static int qlge_suspend(struct pci_dev *pdev, pm_message_t state) | ||
3872 | { | ||
3873 | struct net_device *ndev = pci_get_drvdata(pdev); | ||
3874 | struct ql_adapter *qdev = netdev_priv(ndev); | ||
3875 | int err; | ||
3876 | |||
3877 | netif_device_detach(ndev); | ||
3878 | |||
3879 | if (netif_running(ndev)) { | ||
3880 | err = ql_adapter_down(qdev); | ||
3881 | if (!err) | ||
3882 | return err; | ||
3883 | } | ||
3884 | |||
3885 | err = pci_save_state(pdev); | ||
3886 | if (err) | ||
3887 | return err; | ||
3888 | |||
3889 | pci_disable_device(pdev); | ||
3890 | |||
3891 | pci_set_power_state(pdev, pci_choose_state(pdev, state)); | ||
3892 | |||
3893 | return 0; | ||
3894 | } | ||
3895 | |||
3896 | static int qlge_resume(struct pci_dev *pdev) | ||
3897 | { | ||
3898 | struct net_device *ndev = pci_get_drvdata(pdev); | ||
3899 | struct ql_adapter *qdev = netdev_priv(ndev); | ||
3900 | int err; | ||
3901 | |||
3902 | pci_set_power_state(pdev, PCI_D0); | ||
3903 | pci_restore_state(pdev); | ||
3904 | err = pci_enable_device(pdev); | ||
3905 | if (err) { | ||
3906 | QPRINTK(qdev, IFUP, ERR, "Cannot enable PCI device from suspend\n"); | ||
3907 | return err; | ||
3908 | } | ||
3909 | pci_set_master(pdev); | ||
3910 | |||
3911 | pci_enable_wake(pdev, PCI_D3hot, 0); | ||
3912 | pci_enable_wake(pdev, PCI_D3cold, 0); | ||
3913 | |||
3914 | if (netif_running(ndev)) { | ||
3915 | err = ql_adapter_up(qdev); | ||
3916 | if (err) | ||
3917 | return err; | ||
3918 | } | ||
3919 | |||
3920 | netif_device_attach(ndev); | ||
3921 | |||
3922 | return 0; | ||
3923 | } | ||
3924 | |||
3925 | static void qlge_shutdown(struct pci_dev *pdev) | ||
3926 | { | ||
3927 | qlge_suspend(pdev, PMSG_SUSPEND); | ||
3928 | } | ||
3929 | |||
3930 | static struct pci_driver qlge_driver = { | ||
3931 | .name = DRV_NAME, | ||
3932 | .id_table = qlge_pci_tbl, | ||
3933 | .probe = qlge_probe, | ||
3934 | .remove = __devexit_p(qlge_remove), | ||
3935 | #ifdef CONFIG_PM | ||
3936 | .suspend = qlge_suspend, | ||
3937 | .resume = qlge_resume, | ||
3938 | #endif | ||
3939 | .shutdown = qlge_shutdown, | ||
3940 | .err_handler = &qlge_err_handler | ||
3941 | }; | ||
3942 | |||
3943 | static int __init qlge_init_module(void) | ||
3944 | { | ||
3945 | return pci_register_driver(&qlge_driver); | ||
3946 | } | ||
3947 | |||
3948 | static void __exit qlge_exit(void) | ||
3949 | { | ||
3950 | pci_unregister_driver(&qlge_driver); | ||
3951 | } | ||
3952 | |||
3953 | module_init(qlge_init_module); | ||
3954 | module_exit(qlge_exit); | ||