5 files changed, 65 insertions, 24 deletions

diff --git a/drivers/net/ixgbe/ixgbe_82599.c b/drivers/net/ixgbe/ixgbe_82599.c
index b405a00817c6..12fc0e7ba2ca 100644
--- a/drivers/net/ixgbe/ixgbe_82599.c
+++ b/drivers/net/ixgbe/ixgbe_82599.c
@@ -39,6 +39,8 @@
 #define IXGBE_82599_MC_TBL_SIZE   128
 #define IXGBE_82599_VFT_TBL_SIZE  128
 
+void ixgbe_disable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw);
+void ixgbe_enable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw);
 void ixgbe_flap_tx_laser_multispeed_fiber(struct ixgbe_hw *hw);
 s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw,
                                           ixgbe_link_speed speed,
@@ -69,8 +71,14 @@ static void ixgbe_init_mac_link_ops_82599(struct ixgbe_hw *hw)
         if (hw->phy.multispeed_fiber) {
                 /* Set up dual speed SFP+ support */
                 mac->ops.setup_link = &ixgbe_setup_mac_link_multispeed_fiber;
+                mac->ops.disable_tx_laser =
+                                       &ixgbe_disable_tx_laser_multispeed_fiber;
+                mac->ops.enable_tx_laser =
+                                        &ixgbe_enable_tx_laser_multispeed_fiber;
                 mac->ops.flap_tx_laser = &ixgbe_flap_tx_laser_multispeed_fiber;
         } else {
+                mac->ops.disable_tx_laser = NULL;
+                mac->ops.enable_tx_laser = NULL;
                 mac->ops.flap_tx_laser = NULL;
                 if ((mac->ops.get_media_type(hw) ==
                      ixgbe_media_type_backplane) &&
@@ -415,6 +423,44 @@ s32 ixgbe_start_mac_link_82599(struct ixgbe_hw *hw,
         return status;
 }
 
+ /**
+  *  ixgbe_disable_tx_laser_multispeed_fiber - Disable Tx laser
+  *  @hw: pointer to hardware structure
+  *
+  *  The base drivers may require better control over SFP+ module
+  *  PHY states.  This includes selectively shutting down the Tx
+  *  laser on the PHY, effectively halting physical link.
+  **/
+void ixgbe_disable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw)
+{
+        u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP);
+
+        /* Disable tx laser; allow 100us to go dark per spec */
+        esdp_reg |= IXGBE_ESDP_SDP3;
+        IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
+        IXGBE_WRITE_FLUSH(hw);
+        udelay(100);
+}
+
+/**
+ *  ixgbe_enable_tx_laser_multispeed_fiber - Enable Tx laser
+ *  @hw: pointer to hardware structure
+ *
+ *  The base drivers may require better control over SFP+ module
+ *  PHY states.  This includes selectively turning on the Tx
+ *  laser on the PHY, effectively starting physical link.
+ **/
+void ixgbe_enable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw)
+{
+        u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP);
+
+        /* Enable tx laser; allow 100ms to light up */
+        esdp_reg &= ~IXGBE_ESDP_SDP3;
+        IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
+        IXGBE_WRITE_FLUSH(hw);
+        msleep(100);
+}
+
 /**
  *  ixgbe_flap_tx_laser_multispeed_fiber - Flap Tx laser
  *  @hw: pointer to hardware structure
@@ -429,23 +475,11 @@ s32 ixgbe_start_mac_link_82599(struct ixgbe_hw *hw,
  **/
 void ixgbe_flap_tx_laser_multispeed_fiber(struct ixgbe_hw *hw)
 {
-        u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP);
-
         hw_dbg(hw, "ixgbe_flap_tx_laser_multispeed_fiber\n");
 
         if (hw->mac.autotry_restart) {
-                /* Disable tx laser; allow 100us to go dark per spec */
-                esdp_reg |= IXGBE_ESDP_SDP3;
-                IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
-                IXGBE_WRITE_FLUSH(hw);
-                udelay(100);
-
-                /* Enable tx laser; allow 100ms to light up */
-                esdp_reg &= ~IXGBE_ESDP_SDP3;
-                IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
-                IXGBE_WRITE_FLUSH(hw);
-                msleep(100);
-
+                ixgbe_disable_tx_laser_multispeed_fiber(hw);
+                ixgbe_enable_tx_laser_multispeed_fiber(hw);
                 hw->mac.autotry_restart = false;
         }
 }
diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c
index 1959ef76c962..8f461d5cee77 100644
--- a/drivers/net/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ixgbe/ixgbe_ethtool.c
@@ -29,6 +29,7 @@
 
 #include <linux/types.h>
 #include <linux/module.h>
+#include <linux/slab.h>
 #include <linux/pci.h>
 #include <linux/netdevice.h>
 #include <linux/ethtool.h>
diff --git a/drivers/net/ixgbe/ixgbe_fcoe.c b/drivers/net/ixgbe/ixgbe_fcoe.c
index 9276d5965b0d..6493049b663d 100644
--- a/drivers/net/ixgbe/ixgbe_fcoe.c
+++ b/drivers/net/ixgbe/ixgbe_fcoe.c
@@ -31,6 +31,7 @@
 #include "ixgbe_dcb_82599.h"
 #endif /* CONFIG_IXGBE_DCB */
 #include <linux/if_ether.h>
+#include <linux/gfp.h>
 #include <scsi/scsi_cmnd.h>
 #include <scsi/scsi_device.h>
 #include <scsi/fc/fc_fs.h>
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index 0c553f6cb534..6c00ee493a3b 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -36,6 +36,7 @@
 #include <linux/tcp.h>
 #include <linux/pkt_sched.h>
 #include <linux/ipv6.h>
+#include <linux/slab.h>
 #include <net/checksum.h>
 #include <net/ip6_checksum.h>
 #include <linux/ethtool.h>
@@ -2981,6 +2982,10 @@ static int ixgbe_up_complete(struct ixgbe_adapter *adapter)
         else
                 ixgbe_configure_msi_and_legacy(adapter);
 
+        /* enable the optics */
+        if (hw->phy.multispeed_fiber)
+                hw->mac.ops.enable_tx_laser(hw);
+
         clear_bit(__IXGBE_DOWN, &adapter->state);
         ixgbe_napi_enable_all(adapter);
 
@@ -3242,6 +3247,10 @@ void ixgbe_down(struct ixgbe_adapter *adapter)
         /* signal that we are down to the interrupt handler */
         set_bit(__IXGBE_DOWN, &adapter->state);
 
+        /* power down the optics */
+        if (hw->phy.multispeed_fiber)
+                hw->mac.ops.disable_tx_laser(hw);
+
         /* disable receive for all VFs and wait one second */
         if (adapter->num_vfs) {
                 /* ping all the active vfs to let them know we are going down */
@@ -6252,6 +6261,10 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
                 goto err_eeprom;
         }
 
+        /* power down the optics */
+        if (hw->phy.multispeed_fiber)
+                hw->mac.ops.disable_tx_laser(hw);
+
         init_timer(&adapter->watchdog_timer);
         adapter->watchdog_timer.function = &ixgbe_watchdog;
         adapter->watchdog_timer.data = (unsigned long)adapter;
@@ -6399,16 +6412,6 @@ static void __devexit ixgbe_remove(struct pci_dev *pdev)
         del_timer_sync(&adapter->sfp_timer);
         cancel_work_sync(&adapter->watchdog_task);
         cancel_work_sync(&adapter->sfp_task);
-        if (adapter->hw.phy.multispeed_fiber) {
-                struct ixgbe_hw *hw = &adapter->hw;
-                /*
-                 * Restart clause 37 autoneg, disable and re-enable
-                 * the tx laser, to clear & alert the link partner
-                 * that it needs to restart autotry
-                 */
-                hw->mac.autotry_restart = true;
-                hw->mac.ops.flap_tx_laser(hw);
-        }
         cancel_work_sync(&adapter->multispeed_fiber_task);
         cancel_work_sync(&adapter->sfp_config_module_task);
         if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE ||
diff --git a/drivers/net/ixgbe/ixgbe_type.h b/drivers/net/ixgbe/ixgbe_type.h
index 4ec6dc1a5b75..534affcc38ca 100644
--- a/drivers/net/ixgbe/ixgbe_type.h
+++ b/drivers/net/ixgbe/ixgbe_type.h
@@ -2398,6 +2398,8 @@ struct ixgbe_mac_operations {
         s32 (*enable_rx_dma)(struct ixgbe_hw *, u32);
 
         /* Link */
+        void (*disable_tx_laser)(struct ixgbe_hw *);
+        void (*enable_tx_laser)(struct ixgbe_hw *);
         void (*flap_tx_laser)(struct ixgbe_hw *);
         s32 (*setup_link)(struct ixgbe_hw *, ixgbe_link_speed, bool, bool);
         s32 (*check_link)(struct ixgbe_hw *, ixgbe_link_speed *, bool *, bool);