1 files changed, 7 insertions, 7 deletions

diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index 3d850af0cdda..0dfd1b93829e 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -200,7 +200,7 @@ static struct pci_driver igb_driver = {
         .probe    = igb_probe,
         .remove   = __devexit_p(igb_remove),
 #ifdef CONFIG_PM
-        /* Power Managment Hooks */
+        /* Power Management Hooks */
         .suspend  = igb_suspend,
         .resume   = igb_resume,
 #endif
@@ -2292,7 +2292,7 @@ static void igb_init_hw_timer(struct igb_adapter *adapter)
                 /**
                  * Scale the NIC clock cycle by a large factor so that
                  * relatively small clock corrections can be added or
-                 * substracted at each clock tick. The drawbacks of a large
+                 * subtracted at each clock tick. The drawbacks of a large
                  * factor are a) that the clock register overflows more quickly
                  * (not such a big deal) and b) that the increment per tick has
                  * to fit into 24 bits.  As a result we need to use a shift of
@@ -3409,7 +3409,7 @@ static void igb_set_rx_mode(struct net_device *netdev)
                 } else {
                         /*
                          * Write addresses to the MTA, if the attempt fails
-                         * then we should just turn on promiscous mode so
+                         * then we should just turn on promiscuous mode so
                          * that we can at least receive multicast traffic
                          */
                         count = igb_write_mc_addr_list(netdev);
@@ -3423,7 +3423,7 @@ static void igb_set_rx_mode(struct net_device *netdev)
                 /*
                  * Write addresses to available RAR registers, if there is not
                  * sufficient space to store all the addresses then enable
-                 * unicast promiscous mode
+                 * unicast promiscuous mode
                  */
                 count = igb_write_uc_addr_list(netdev);
                 if (count < 0) {
@@ -4317,7 +4317,7 @@ netdev_tx_t igb_xmit_frame_ring_adv(struct sk_buff *skb,
 
         /*
          * count reflects descriptors mapped, if 0 or less then mapping error
-         * has occured and we need to rewind the descriptor queue
+         * has occurred and we need to rewind the descriptor queue
          */
         count = igb_tx_map_adv(tx_ring, skb, first);
         if (!count) {
@@ -5352,8 +5352,8 @@ static void igb_msg_task(struct igb_adapter *adapter)
  *  The unicast table address is a register array of 32-bit registers.
  *  The table is meant to be used in a way similar to how the MTA is used
  *  however due to certain limitations in the hardware it is necessary to
- *  set all the hash bits to 1 and use the VMOLR ROPE bit as a promiscous
- *  enable bit to allow vlan tag stripping when promiscous mode is enabled
+ *  set all the hash bits to 1 and use the VMOLR ROPE bit as a promiscuous
+ *  enable bit to allow vlan tag stripping when promiscuous mode is enabled
  **/
 static void igb_set_uta(struct igb_adapter *adapter)
 {