1 files changed, 503 insertions, 0 deletions
diff --git a/drivers/net/ethernet/atheros/atlx/atlx.h b/drivers/net/ethernet/atheros/atlx/atlx.h
new file mode 100644
index 000000000000..14054b75aa62
--- /dev/null
+++ b/drivers/net/ethernet/atheros/atlx/atlx.h
@@ -0,0 +1,503 @@
+/* atlx_hw.h -- common hardware definitions for Attansic network drivers
+ *
+ * Copyright(c) 2005 - 2006 Attansic Corporation. All rights reserved.
+ * Copyright(c) 2006 - 2007 Chris Snook <csnook@redhat.com>
+ * Copyright(c) 2006 - 2008 Jay Cliburn <jcliburn@gmail.com>
+ * Copyright(c) 2007 Atheros Corporation. All rights reserved.
+ *
+ * Derived from Intel e1000 driver
+ * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+#ifndef ATLX_H
+#define ATLX_H
+#include <linux/module.h>
+#include <linux/types.h>
+#define ATLX_ERR_PHY                    2
+#define ATLX_ERR_PHY_SPEED              7
+#define ATLX_ERR_PHY_RES                8
+#define SPEED_0                         0xffff
+#define SPEED_10                        10
+#define SPEED_100                       100
+#define SPEED_1000                      1000
+#define HALF_DUPLEX                     1
+#define FULL_DUPLEX                     2
+#define MEDIA_TYPE_AUTO_SENSOR          0
+/* register definitions */
+#define REG_PM_CTRLSTAT                 0x44
+#define REG_PCIE_CAP_LIST               0x58
+#define REG_VPD_CAP                     0x6C
+#define VPD_CAP_ID_MASK                 0xFF
+#define VPD_CAP_ID_SHIFT                0
+#define VPD_CAP_NEXT_PTR_MASK           0xFF
+#define VPD_CAP_NEXT_PTR_SHIFT          8
+#define VPD_CAP_VPD_ADDR_MASK           0x7FFF
+#define VPD_CAP_VPD_ADDR_SHIFT          16
+#define VPD_CAP_VPD_FLAG                0x80000000
+#define REG_VPD_DATA                    0x70
+#define REG_SPI_FLASH_CTRL              0x200
+#define SPI_FLASH_CTRL_STS_NON_RDY      0x1
+#define SPI_FLASH_CTRL_STS_WEN          0x2
+#define SPI_FLASH_CTRL_STS_WPEN         0x80
+#define SPI_FLASH_CTRL_DEV_STS_MASK     0xFF
+#define SPI_FLASH_CTRL_DEV_STS_SHIFT    0
+#define SPI_FLASH_CTRL_INS_MASK         0x7
+#define SPI_FLASH_CTRL_INS_SHIFT        8
+#define SPI_FLASH_CTRL_START            0x800
+#define SPI_FLASH_CTRL_EN_VPD           0x2000
+#define SPI_FLASH_CTRL_LDSTART          0x8000
+#define SPI_FLASH_CTRL_CS_HI_MASK       0x3
+#define SPI_FLASH_CTRL_CS_HI_SHIFT      16
+#define SPI_FLASH_CTRL_CS_HOLD_MASK     0x3
+#define SPI_FLASH_CTRL_CS_HOLD_SHIFT    18
+#define SPI_FLASH_CTRL_CLK_LO_MASK      0x3
+#define SPI_FLASH_CTRL_CLK_LO_SHIFT     20
+#define SPI_FLASH_CTRL_CLK_HI_MASK      0x3
+#define SPI_FLASH_CTRL_CLK_HI_SHIFT     22
+#define SPI_FLASH_CTRL_CS_SETUP_MASK    0x3
+#define SPI_FLASH_CTRL_CS_SETUP_SHIFT   24
+#define SPI_FLASH_CTRL_EROM_PGSZ_MASK   0x3
+#define SPI_FLASH_CTRL_EROM_PGSZ_SHIFT  26
+#define SPI_FLASH_CTRL_WAIT_READY       0x10000000
+#define REG_SPI_ADDR                    0x204
+#define REG_SPI_DATA                    0x208
+#define REG_SPI_FLASH_CONFIG            0x20C
+#define SPI_FLASH_CONFIG_LD_ADDR_MASK   0xFFFFFF
+#define SPI_FLASH_CONFIG_LD_ADDR_SHIFT  0
+#define SPI_FLASH_CONFIG_VPD_ADDR_MASK  0x3
+#define SPI_FLASH_CONFIG_VPD_ADDR_SHIFT 24
+#define SPI_FLASH_CONFIG_LD_EXIST       0x4000000
+#define REG_SPI_FLASH_OP_PROGRAM        0x210
+#define REG_SPI_FLASH_OP_SC_ERASE       0x211
+#define REG_SPI_FLASH_OP_CHIP_ERASE     0x212
+#define REG_SPI_FLASH_OP_RDID           0x213
+#define REG_SPI_FLASH_OP_WREN           0x214
+#define REG_SPI_FLASH_OP_RDSR           0x215
+#define REG_SPI_FLASH_OP_WRSR           0x216
+#define REG_SPI_FLASH_OP_READ           0x217
+#define REG_TWSI_CTRL                   0x218
+#define TWSI_CTRL_LD_OFFSET_MASK        0xFF
+#define TWSI_CTRL_LD_OFFSET_SHIFT       0
+#define TWSI_CTRL_LD_SLV_ADDR_MASK      0x7
+#define TWSI_CTRL_LD_SLV_ADDR_SHIFT     8
+#define TWSI_CTRL_SW_LDSTART            0x800
+#define TWSI_CTRL_HW_LDSTART            0x1000
+#define TWSI_CTRL_SMB_SLV_ADDR_MASK     0x7F
+#define TWSI_CTRL_SMB_SLV_ADDR_SHIFT    15
+#define TWSI_CTRL_LD_EXIST              0x400000
+#define TWSI_CTRL_READ_FREQ_SEL_MASK    0x3
+#define TWSI_CTRL_READ_FREQ_SEL_SHIFT   23
+#define TWSI_CTRL_FREQ_SEL_100K         0
+#define TWSI_CTRL_FREQ_SEL_200K         1
+#define TWSI_CTRL_FREQ_SEL_300K         2
+#define TWSI_CTRL_FREQ_SEL_400K         3
+#define TWSI_CTRL_SMB_SLV_ADDR          /* FIXME: define or remove */
+#define TWSI_CTRL_WRITE_FREQ_SEL_MASK   0x3
+#define TWSI_CTRL_WRITE_FREQ_SEL_SHIFT  24
+#define REG_PCIE_DEV_MISC_CTRL                  0x21C
+#define PCIE_DEV_MISC_CTRL_EXT_PIPE             0x2
+#define PCIE_DEV_MISC_CTRL_RETRY_BUFDIS         0x1
+#define PCIE_DEV_MISC_CTRL_SPIROM_EXIST         0x4
+#define PCIE_DEV_MISC_CTRL_SERDES_ENDIAN        0x8
+#define PCIE_DEV_MISC_CTRL_SERDES_SEL_DIN       0x10
+#define REG_PCIE_PHYMISC                0x1000
+#define PCIE_PHYMISC_FORCE_RCV_DET      0x4
+#define REG_PCIE_DLL_TX_CTRL1           0x1104
+#define PCIE_DLL_TX_CTRL1_SEL_NOR_CLK   0x400
+#define PCIE_DLL_TX_CTRL1_DEF           0x568
+#define REG_LTSSM_TEST_MODE             0x12FC
+#define LTSSM_TEST_MODE_DEF             0x6500
+/* Master Control Register */
+#define REG_MASTER_CTRL                 0x1400
+#define MASTER_CTRL_SOFT_RST            0x1
+#define MASTER_CTRL_MTIMER_EN           0x2
+#define MASTER_CTRL_ITIMER_EN           0x4
+#define MASTER_CTRL_MANUAL_INT          0x8
+#define MASTER_CTRL_REV_NUM_SHIFT       16
+#define MASTER_CTRL_REV_NUM_MASK        0xFF
+#define MASTER_CTRL_DEV_ID_SHIFT        24
+#define MASTER_CTRL_DEV_ID_MASK         0xFF
+/* Timer Initial Value Register */
+#define REG_MANUAL_TIMER_INIT           0x1404
+/* IRQ Moderator Timer Initial Value Register */
+#define REG_IRQ_MODU_TIMER_INIT         0x1408
+#define REG_PHY_ENABLE                  0x140C
+/* IRQ Anti-Lost Timer Initial Value Register */
+#define REG_CMBDISDMA_TIMER             0x140E
+/* Block IDLE Status Register */
+#define REG_IDLE_STATUS                 0x1410
+/* MDIO Control Register */
+#define REG_MDIO_CTRL                   0x1414
+#define MDIO_DATA_MASK                  0xFFFF
+#define MDIO_DATA_SHIFT                 0
+#define MDIO_REG_ADDR_MASK              0x1F
+#define MDIO_REG_ADDR_SHIFT             16
+#define MDIO_RW                         0x200000
+#define MDIO_SUP_PREAMBLE               0x400000
+#define MDIO_START                      0x800000
+#define MDIO_CLK_SEL_SHIFT              24
+#define MDIO_CLK_25_4                   0
+#define MDIO_CLK_25_6                   2
+#define MDIO_CLK_25_8                   3
+#define MDIO_CLK_25_10                  4
+#define MDIO_CLK_25_14                  5
+#define MDIO_CLK_25_20                  6
+#define MDIO_CLK_25_28                  7
+#define MDIO_BUSY                       0x8000000
+/* MII PHY Status Register */
+#define REG_PHY_STATUS                  0x1418
+/* BIST Control and Status Register0 (for the Packet Memory) */
+#define REG_BIST0_CTRL                  0x141C
+#define BIST0_NOW                       0x1
+#define BIST0_SRAM_FAIL                 0x2
+#define BIST0_FUSE_FLAG                 0x4
+#define REG_BIST1_CTRL                  0x1420
+#define BIST1_NOW                       0x1
+#define BIST1_SRAM_FAIL                 0x2
+#define BIST1_FUSE_FLAG                 0x4
+/* SerDes Lock Detect Control and Status Register */
+#define REG_SERDES_LOCK                 0x1424
+#define SERDES_LOCK_DETECT              1
+#define SERDES_LOCK_DETECT_EN           2
+/* MAC Control Register */
+#define REG_MAC_CTRL                    0x1480
+#define MAC_CTRL_TX_EN                  1
+#define MAC_CTRL_RX_EN                  2
+#define MAC_CTRL_TX_FLOW                4
+#define MAC_CTRL_RX_FLOW                8
+#define MAC_CTRL_LOOPBACK               0x10
+#define MAC_CTRL_DUPLX                  0x20
+#define MAC_CTRL_ADD_CRC                0x40
+#define MAC_CTRL_PAD                    0x80
+#define MAC_CTRL_LENCHK                 0x100
+#define MAC_CTRL_HUGE_EN                0x200
+#define MAC_CTRL_PRMLEN_SHIFT           10
+#define MAC_CTRL_PRMLEN_MASK            0xF
+#define MAC_CTRL_RMV_VLAN               0x4000
+#define MAC_CTRL_PROMIS_EN              0x8000
+#define MAC_CTRL_MC_ALL_EN              0x2000000
+#define MAC_CTRL_BC_EN                  0x4000000
+/* MAC IPG/IFG Control Register */
+#define REG_MAC_IPG_IFG                 0x1484
+#define MAC_IPG_IFG_IPGT_SHIFT          0
+#define MAC_IPG_IFG_IPGT_MASK           0x7F
+#define MAC_IPG_IFG_MIFG_SHIFT          8
+#define MAC_IPG_IFG_MIFG_MASK           0xFF
+#define MAC_IPG_IFG_IPGR1_SHIFT         16
+#define MAC_IPG_IFG_IPGR1_MASK          0x7F
+#define MAC_IPG_IFG_IPGR2_SHIFT         24
+#define MAC_IPG_IFG_IPGR2_MASK          0x7F
+/* MAC STATION ADDRESS */
+#define REG_MAC_STA_ADDR                0x1488
+/* Hash table for multicast address */
+#define REG_RX_HASH_TABLE               0x1490
+/* MAC Half-Duplex Control Register */
+#define REG_MAC_HALF_DUPLX_CTRL                 0x1498
+#define MAC_HALF_DUPLX_CTRL_LCOL_SHIFT          0
+#define MAC_HALF_DUPLX_CTRL_LCOL_MASK           0x3FF
+#define MAC_HALF_DUPLX_CTRL_RETRY_SHIFT         12
+#define MAC_HALF_DUPLX_CTRL_RETRY_MASK          0xF
+#define MAC_HALF_DUPLX_CTRL_EXC_DEF_EN          0x10000
+#define MAC_HALF_DUPLX_CTRL_NO_BACK_C           0x20000
+#define MAC_HALF_DUPLX_CTRL_NO_BACK_P           0x40000
+#define MAC_HALF_DUPLX_CTRL_ABEBE               0x80000
+#define MAC_HALF_DUPLX_CTRL_ABEBT_SHIFT         20
+#define MAC_HALF_DUPLX_CTRL_ABEBT_MASK          0xF
+#define MAC_HALF_DUPLX_CTRL_JAMIPG_SHIFT        24
+#define MAC_HALF_DUPLX_CTRL_JAMIPG_MASK         0xF
+/* Maximum Frame Length Control Register */
+#define REG_MTU                         0x149C
+/* Wake-On-Lan control register */
+#define REG_WOL_CTRL                    0x14A0
+#define WOL_PATTERN_EN                  0x1
+#define WOL_PATTERN_PME_EN              0x2
+#define WOL_MAGIC_EN                    0x4
+#define WOL_MAGIC_PME_EN                0x8
+#define WOL_LINK_CHG_EN                 0x10
+#define WOL_LINK_CHG_PME_EN             0x20
+#define WOL_PATTERN_ST                  0x100
+#define WOL_MAGIC_ST                    0x200
+#define WOL_LINKCHG_ST                  0x400
+#define WOL_PT0_EN                      0x10000
+#define WOL_PT1_EN                      0x20000
+#define WOL_PT2_EN                      0x40000
+#define WOL_PT3_EN                      0x80000
+#define WOL_PT4_EN                      0x100000
+#define WOL_PT0_MATCH                   0x1000000
+#define WOL_PT1_MATCH                   0x2000000
+#define WOL_PT2_MATCH                   0x4000000
+#define WOL_PT3_MATCH                   0x8000000
+#define WOL_PT4_MATCH                   0x10000000
+/* Internal SRAM Partition Register, high 32 bits */
+#define REG_SRAM_RFD_ADDR               0x1500
+/* Descriptor Control register, high 32 bits */
+#define REG_DESC_BASE_ADDR_HI           0x1540
+/* Interrupt Status Register */
+#define REG_ISR                         0x1600
+#define ISR_UR_DETECTED                 0x1000000
+#define ISR_FERR_DETECTED               0x2000000
+#define ISR_NFERR_DETECTED              0x4000000
+#define ISR_CERR_DETECTED               0x8000000
+#define ISR_PHY_LINKDOWN                0x10000000
+#define ISR_DIS_INT                     0x80000000
+/* Interrupt Mask Register */
+#define REG_IMR                         0x1604
+#define REG_RFD_RRD_IDX                 0x1800
+#define REG_TPD_IDX                     0x1804
+/* MII definitions */
+/* PHY Common Register */
+#define MII_ATLX_CR                     0x09
+#define MII_ATLX_SR                     0x0A
+#define MII_ATLX_ESR                    0x0F
+#define MII_ATLX_PSCR                   0x10
+#define MII_ATLX_PSSR                   0x11
+/* PHY Control Register */
+#define MII_CR_SPEED_SELECT_MSB         0x0040  /* bits 6,13: 10=1000, 01=100,
+                                                 * 00=10
+                                                 */
+#define MII_CR_COLL_TEST_ENABLE         0x0080  /* Collision test enable */
+#define MII_CR_FULL_DUPLEX              0x0100  /* FDX =1, half duplex =0 */
+#define MII_CR_RESTART_AUTO_NEG         0x0200  /* Restart auto negotiation */
+#define MII_CR_ISOLATE                  0x0400  /* Isolate PHY from MII */
+#define MII_CR_POWER_DOWN               0x0800  /* Power down */
+#define MII_CR_AUTO_NEG_EN              0x1000  /* Auto Neg Enable */
+#define MII_CR_SPEED_SELECT_LSB         0x2000  /* bits 6,13: 10=1000, 01=100,
+                                                 * 00=10
+                                                 */
+#define MII_CR_LOOPBACK                 0x4000  /* 0 = normal, 1 = loopback */
+#define MII_CR_RESET                    0x8000  /* 0 = normal, 1 = PHY reset */
+#define MII_CR_SPEED_MASK               0x2040
+#define MII_CR_SPEED_1000               0x0040
+#define MII_CR_SPEED_100                0x2000
+#define MII_CR_SPEED_10                 0x0000
+/* PHY Status Register */
+#define MII_SR_EXTENDED_CAPS            0x0001  /* Ext register capabilities */
+#define MII_SR_JABBER_DETECT            0x0002  /* Jabber Detected */
+#define MII_SR_LINK_STATUS              0x0004  /* Link Status 1 = link */
+#define MII_SR_AUTONEG_CAPS             0x0008  /* Auto Neg Capable */
+#define MII_SR_REMOTE_FAULT             0x0010  /* Remote Fault Detect */
+#define MII_SR_AUTONEG_COMPLETE         0x0020  /* Auto Neg Complete */
+#define MII_SR_PREAMBLE_SUPPRESS        0x0040  /* Preamble may be suppressed */
+#define MII_SR_EXTENDED_STATUS          0x0100  /* Ext stat info in Reg 0x0F */
+#define MII_SR_100T2_HD_CAPS            0x0200  /* 100T2 Half Duplex Capable */
+#define MII_SR_100T2_FD_CAPS            0x0400  /* 100T2 Full Duplex Capable */
+#define MII_SR_10T_HD_CAPS              0x0800  /* 10T   Half Duplex Capable */
+#define MII_SR_10T_FD_CAPS              0x1000  /* 10T   Full Duplex Capable */
+#define MII_SR_100X_HD_CAPS             0x2000  /* 100X  Half Duplex Capable */
+#define MII_SR_100X_FD_CAPS             0x4000  /* 100X  Full Duplex Capable */
+#define MII_SR_100T4_CAPS               0x8000  /* 100T4 Capable */
+/* Link partner ability register */
+#define MII_LPA_SLCT                    0x001f  /* Same as advertise selector */
+#define MII_LPA_10HALF                  0x0020  /* Can do 10mbps half-duplex */
+#define MII_LPA_10FULL                  0x0040  /* Can do 10mbps full-duplex */
+#define MII_LPA_100HALF                 0x0080  /* Can do 100mbps half-duplex */
+#define MII_LPA_100FULL                 0x0100  /* Can do 100mbps full-duplex */
+#define MII_LPA_100BASE4                0x0200  /* 100BASE-T4 */
+#define MII_LPA_PAUSE                   0x0400  /* PAUSE */
+#define MII_LPA_ASYPAUSE                0x0800  /* Asymmetrical PAUSE */
+#define MII_LPA_RFAULT                  0x2000  /* Link partner faulted */
+#define MII_LPA_LPACK                   0x4000  /* Link partner acked us */
+#define MII_LPA_NPAGE                   0x8000  /* Next page bit */
+/* Autoneg Advertisement Register */
+#define MII_AR_SELECTOR_FIELD           0x0001  /* IEEE 802.3 CSMA/CD */
+#define MII_AR_10T_HD_CAPS              0x0020  /* 10T   Half Duplex Capable */
+#define MII_AR_10T_FD_CAPS              0x0040  /* 10T   Full Duplex Capable */
+#define MII_AR_100TX_HD_CAPS            0x0080  /* 100TX Half Duplex Capable */
+#define MII_AR_100TX_FD_CAPS            0x0100  /* 100TX Full Duplex Capable */
+#define MII_AR_100T4_CAPS               0x0200  /* 100T4 Capable */
+#define MII_AR_PAUSE                    0x0400  /* Pause operation desired */
+#define MII_AR_ASM_DIR                  0x0800  /* Asymmetric Pause Dir bit */
+#define MII_AR_REMOTE_FAULT             0x2000  /* Remote Fault detected */
+#define MII_AR_NEXT_PAGE                0x8000  /* Next Page ability support */
+#define MII_AR_SPEED_MASK               0x01E0
+#define MII_AR_DEFAULT_CAP_MASK         0x0DE0
+/* 1000BASE-T Control Register */
+#define MII_ATLX_CR_1000T_HD_CAPS       0x0100  /* Adv 1000T HD cap */
+#define MII_ATLX_CR_1000T_FD_CAPS       0x0200  /* Adv 1000T FD cap */
+#define MII_ATLX_CR_1000T_REPEATER_DTE  0x0400  /* 1=Repeater/switch device,
+                                                 * 0=DTE device */
+#define MII_ATLX_CR_1000T_MS_VALUE      0x0800  /* 1=Config PHY as Master,
+                                                 * 0=Configure PHY as Slave */
+#define MII_ATLX_CR_1000T_MS_ENABLE     0x1000  /* 1=Man Master/Slave config,
+                                                 * 0=Auto Master/Slave config
+                                                 */
+#define MII_ATLX_CR_1000T_TEST_MODE_NORMAL      0x0000  /* Normal Operation */
+#define MII_ATLX_CR_1000T_TEST_MODE_1   0x2000  /* Transmit Waveform test */
+#define MII_ATLX_CR_1000T_TEST_MODE_2   0x4000  /* Master Xmit Jitter test */
+#define MII_ATLX_CR_1000T_TEST_MODE_3   0x6000  /* Slave Xmit Jitter test */
+#define MII_ATLX_CR_1000T_TEST_MODE_4   0x8000  /* Xmitter Distortion test */
+#define MII_ATLX_CR_1000T_SPEED_MASK    0x0300
+#define MII_ATLX_CR_1000T_DEFAULT_CAP_MASK      0x0300
+/* 1000BASE-T Status Register */
+#define MII_ATLX_SR_1000T_LP_HD_CAPS    0x0400  /* LP is 1000T HD capable */
+#define MII_ATLX_SR_1000T_LP_FD_CAPS    0x0800  /* LP is 1000T FD capable */
+#define MII_ATLX_SR_1000T_REMOTE_RX_STATUS      0x1000  /* Remote receiver OK */
+#define MII_ATLX_SR_1000T_LOCAL_RX_STATUS       0x2000  /* Local receiver OK */
+#define MII_ATLX_SR_1000T_MS_CONFIG_RES         0x4000  /* 1=Local TX is Master
+                                                         * 0=Slave
+                                                         */
+#define MII_ATLX_SR_1000T_MS_CONFIG_FAULT       0x8000  /* Master/Slave config
+                                                         * fault */
+#define MII_ATLX_SR_1000T_REMOTE_RX_STATUS_SHIFT        12
+#define MII_ATLX_SR_1000T_LOCAL_RX_STATUS_SHIFT         13
+/* Extended Status Register */
+#define MII_ATLX_ESR_1000T_HD_CAPS      0x1000  /* 1000T HD capable */
+#define MII_ATLX_ESR_1000T_FD_CAPS      0x2000  /* 1000T FD capable */
+#define MII_ATLX_ESR_1000X_HD_CAPS      0x4000  /* 1000X HD capable */
+#define MII_ATLX_ESR_1000X_FD_CAPS      0x8000  /* 1000X FD capable */
+/* ATLX PHY Specific Control Register */
+#define MII_ATLX_PSCR_JABBER_DISABLE    0x0001  /* 1=Jabber Func disabled */
+#define MII_ATLX_PSCR_POLARITY_REVERSAL 0x0002  /* 1=Polarity Reversal enbld */
+#define MII_ATLX_PSCR_SQE_TEST          0x0004  /* 1=SQE Test enabled */
+#define MII_ATLX_PSCR_MAC_POWERDOWN     0x0008
+#define MII_ATLX_PSCR_CLK125_DISABLE    0x0010  /* 1=CLK125 low
+                                                 * 0=CLK125 toggling
+                                                 */
+#define MII_ATLX_PSCR_MDI_MANUAL_MODE   0x0000  /* MDI Crossover Mode bits 6:5,
+                                                 * Manual MDI configuration
+                                                 */
+#define MII_ATLX_PSCR_MDIX_MANUAL_MODE  0x0020  /* Manual MDIX configuration */
+#define MII_ATLX_PSCR_AUTO_X_1000T      0x0040  /* 1000BASE-T: Auto crossover
+                                                 * 100BASE-TX/10BASE-T: MDI
+                                                 * Mode */
+#define MII_ATLX_PSCR_AUTO_X_MODE       0x0060  /* Auto crossover enabled
+                                                 * all speeds.
+                                                 */
+#define MII_ATLX_PSCR_10BT_EXT_DIST_ENABLE      0x0080  /* 1=Enable Extended
+                                                         * 10BASE-T distance
+                                                         * (Lower 10BASE-T RX
+                                                         * Threshold)
+                                                         * 0=Normal 10BASE-T RX
+                                                         * Threshold
+                                                         */
+#define MII_ATLX_PSCR_MII_5BIT_ENABLE   0x0100  /* 1=5-Bit interface in
+                                                 * 100BASE-TX
+                                                 * 0=MII interface in
+                                                 * 100BASE-TX
+                                                 */
+#define MII_ATLX_PSCR_SCRAMBLER_DISABLE 0x0200  /* 1=Scrambler dsbl */
+#define MII_ATLX_PSCR_FORCE_LINK_GOOD   0x0400  /* 1=Force link good */
+#define MII_ATLX_PSCR_ASSERT_CRS_ON_TX  0x0800  /* 1=Assert CRS on Transmit */
+#define MII_ATLX_PSCR_POLARITY_REVERSAL_SHIFT           1
+#define MII_ATLX_PSCR_AUTO_X_MODE_SHIFT                 5
+#define MII_ATLX_PSCR_10BT_EXT_DIST_ENABLE_SHIFT        7
+/* ATLX PHY Specific Status Register */
+#define MII_ATLX_PSSR_SPD_DPLX_RESOLVED 0x0800  /* 1=Speed & Duplex resolved */
+#define MII_ATLX_PSSR_DPLX              0x2000  /* 1=Duplex 0=Half Duplex */
+#define MII_ATLX_PSSR_SPEED             0xC000  /* Speed, bits 14:15 */
+#define MII_ATLX_PSSR_10MBS             0x0000  /* 00=10Mbs */
+#define MII_ATLX_PSSR_100MBS            0x4000  /* 01=100Mbs */
+#define MII_ATLX_PSSR_1000MBS           0x8000  /* 10=1000Mbs */
+#define MII_DBG_ADDR                    0x1D
+#define MII_DBG_DATA                    0x1E
+/* PCI Command Register Bit Definitions */
+#define PCI_REG_COMMAND                 0x04    /* PCI Command Register */
+#define CMD_IO_SPACE                    0x0001
+#define CMD_MEMORY_SPACE                0x0002
+#define CMD_BUS_MASTER                  0x0004
+/* Wake Up Filter Control */
+#define ATLX_WUFC_LNKC  0x00000001      /* Link Status Change Wakeup Enable */
+#define ATLX_WUFC_MAG   0x00000002      /* Magic Packet Wakeup Enable */
+#define ATLX_WUFC_EX    0x00000004      /* Directed Exact Wakeup Enable */
+#define ATLX_WUFC_MC    0x00000008      /* Multicast Wakeup Enable */
+#define ATLX_WUFC_BC    0x00000010      /* Broadcast Wakeup Enable */
+#define ADVERTISE_10_HALF               0x0001
+#define ADVERTISE_10_FULL               0x0002
+#define ADVERTISE_100_HALF              0x0004
+#define ADVERTISE_100_FULL              0x0008
+#define ADVERTISE_1000_HALF             0x0010
+#define ADVERTISE_1000_FULL             0x0020
+#define AUTONEG_ADVERTISE_10_100_ALL    0x000F  /* All 10/100 speeds */
+#define AUTONEG_ADVERTISE_10_ALL        0x0003  /* 10Mbps Full & Half speeds */
+#define PHY_AUTO_NEG_TIME               45      /* 4.5 Seconds */
+#define PHY_FORCE_TIME                  20      /* 2.0 Seconds */
+/* For checksumming, the sum of all words in the EEPROM should equal 0xBABA */
+#define EEPROM_SUM                      0xBABA
+#define NODE_ADDRESS_SIZE               6
+struct atlx_spi_flash_dev {
+        const char *manu_name;  /* manufacturer id */
+        /* op-code */
+        u8 cmd_wrsr;
+        u8 cmd_read;
+        u8 cmd_program;
+        u8 cmd_wren;
+        u8 cmd_wrdi;
+        u8 cmd_rdsr;
+        u8 cmd_rdid;
+        u8 cmd_sector_erase;
+        u8 cmd_chip_erase;
+};
+#endif /* ATLX_H */

diff --git a/drivers/net/ethernet/atheros/atlx/atlx.h b/drivers/net/ethernet/atheros/atlx/atlx.h new file mode 100644 index 000000000000..14054b75aa62 --- /dev/null +++ b/drivers/net/ethernet/atheros/atlx/atlx.h
@@ -0,0 +1,503 @@
	1	/* atlx_hw.h -- common hardware definitions for Attansic network drivers
	2	*
	3	* Copyright(c) 2005 - 2006 Attansic Corporation. All rights reserved.
	4	* Copyright(c) 2006 - 2007 Chris Snook <csnook@redhat.com>
	5	* Copyright(c) 2006 - 2008 Jay Cliburn <jcliburn@gmail.com>
	6	* Copyright(c) 2007 Atheros Corporation. All rights reserved.
	7	*
	8	* Derived from Intel e1000 driver
	9	* Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
	10	*
	11	* This program is free software; you can redistribute it and/or modify it
	12	* under the terms of the GNU General Public License as published by the Free
	13	* Software Foundation; either version 2 of the License, or (at your option)
	14	* any later version.
	15	*
	16	* This program is distributed in the hope that it will be useful, but WITHOUT
	17	* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
	18	* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
	19	* more details.
	20	*
	21	* You should have received a copy of the GNU General Public License along with
	22	* this program; if not, write to the Free Software Foundation, Inc., 59
	23	* Temple Place - Suite 330, Boston, MA 02111-1307, USA.
	24	*/
	25
	26	#ifndef ATLX_H
	27	#define ATLX_H
	28
	29	#include <linux/module.h>
	30	#include <linux/types.h>
	31
	32	#define ATLX_ERR_PHY 2
	33	#define ATLX_ERR_PHY_SPEED 7
	34	#define ATLX_ERR_PHY_RES 8
	35
	36	#define SPEED_0 0xffff
	37	#define SPEED_10 10
	38	#define SPEED_100 100
	39	#define SPEED_1000 1000
	40	#define HALF_DUPLEX 1
	41	#define FULL_DUPLEX 2
	42
	43	#define MEDIA_TYPE_AUTO_SENSOR 0
	44
	45	/* register definitions */
	46	#define REG_PM_CTRLSTAT 0x44
	47
	48	#define REG_PCIE_CAP_LIST 0x58
	49
	50	#define REG_VPD_CAP 0x6C
	51	#define VPD_CAP_ID_MASK 0xFF
	52	#define VPD_CAP_ID_SHIFT 0
	53	#define VPD_CAP_NEXT_PTR_MASK 0xFF
	54	#define VPD_CAP_NEXT_PTR_SHIFT 8
	55	#define VPD_CAP_VPD_ADDR_MASK 0x7FFF
	56	#define VPD_CAP_VPD_ADDR_SHIFT 16
	57	#define VPD_CAP_VPD_FLAG 0x80000000
	58
	59	#define REG_VPD_DATA 0x70
	60
	61	#define REG_SPI_FLASH_CTRL 0x200
	62	#define SPI_FLASH_CTRL_STS_NON_RDY 0x1
	63	#define SPI_FLASH_CTRL_STS_WEN 0x2
	64	#define SPI_FLASH_CTRL_STS_WPEN 0x80
	65	#define SPI_FLASH_CTRL_DEV_STS_MASK 0xFF
	66	#define SPI_FLASH_CTRL_DEV_STS_SHIFT 0
	67	#define SPI_FLASH_CTRL_INS_MASK 0x7
	68	#define SPI_FLASH_CTRL_INS_SHIFT 8
	69	#define SPI_FLASH_CTRL_START 0x800
	70	#define SPI_FLASH_CTRL_EN_VPD 0x2000
	71	#define SPI_FLASH_CTRL_LDSTART 0x8000
	72	#define SPI_FLASH_CTRL_CS_HI_MASK 0x3
	73	#define SPI_FLASH_CTRL_CS_HI_SHIFT 16
	74	#define SPI_FLASH_CTRL_CS_HOLD_MASK 0x3
	75	#define SPI_FLASH_CTRL_CS_HOLD_SHIFT 18
	76	#define SPI_FLASH_CTRL_CLK_LO_MASK 0x3
	77	#define SPI_FLASH_CTRL_CLK_LO_SHIFT 20
	78	#define SPI_FLASH_CTRL_CLK_HI_MASK 0x3
	79	#define SPI_FLASH_CTRL_CLK_HI_SHIFT 22
	80	#define SPI_FLASH_CTRL_CS_SETUP_MASK 0x3
	81	#define SPI_FLASH_CTRL_CS_SETUP_SHIFT 24
	82	#define SPI_FLASH_CTRL_EROM_PGSZ_MASK 0x3
	83	#define SPI_FLASH_CTRL_EROM_PGSZ_SHIFT 26
	84	#define SPI_FLASH_CTRL_WAIT_READY 0x10000000
	85
	86	#define REG_SPI_ADDR 0x204
	87
	88	#define REG_SPI_DATA 0x208
	89
	90	#define REG_SPI_FLASH_CONFIG 0x20C
	91	#define SPI_FLASH_CONFIG_LD_ADDR_MASK 0xFFFFFF
	92	#define SPI_FLASH_CONFIG_LD_ADDR_SHIFT 0
	93	#define SPI_FLASH_CONFIG_VPD_ADDR_MASK 0x3
	94	#define SPI_FLASH_CONFIG_VPD_ADDR_SHIFT 24
	95	#define SPI_FLASH_CONFIG_LD_EXIST 0x4000000
	96
	97	#define REG_SPI_FLASH_OP_PROGRAM 0x210
	98	#define REG_SPI_FLASH_OP_SC_ERASE 0x211
	99	#define REG_SPI_FLASH_OP_CHIP_ERASE 0x212
	100	#define REG_SPI_FLASH_OP_RDID 0x213
	101	#define REG_SPI_FLASH_OP_WREN 0x214
	102	#define REG_SPI_FLASH_OP_RDSR 0x215
	103	#define REG_SPI_FLASH_OP_WRSR 0x216
	104	#define REG_SPI_FLASH_OP_READ 0x217
	105
	106	#define REG_TWSI_CTRL 0x218
	107	#define TWSI_CTRL_LD_OFFSET_MASK 0xFF
	108	#define TWSI_CTRL_LD_OFFSET_SHIFT 0
	109	#define TWSI_CTRL_LD_SLV_ADDR_MASK 0x7
	110	#define TWSI_CTRL_LD_SLV_ADDR_SHIFT 8
	111	#define TWSI_CTRL_SW_LDSTART 0x800
	112	#define TWSI_CTRL_HW_LDSTART 0x1000
	113	#define TWSI_CTRL_SMB_SLV_ADDR_MASK 0x7F
	114	#define TWSI_CTRL_SMB_SLV_ADDR_SHIFT 15
	115	#define TWSI_CTRL_LD_EXIST 0x400000
	116	#define TWSI_CTRL_READ_FREQ_SEL_MASK 0x3
	117	#define TWSI_CTRL_READ_FREQ_SEL_SHIFT 23
	118	#define TWSI_CTRL_FREQ_SEL_100K 0
	119	#define TWSI_CTRL_FREQ_SEL_200K 1
	120	#define TWSI_CTRL_FREQ_SEL_300K 2
	121	#define TWSI_CTRL_FREQ_SEL_400K 3
	122	#define TWSI_CTRL_SMB_SLV_ADDR /* FIXME: define or remove */
	123	#define TWSI_CTRL_WRITE_FREQ_SEL_MASK 0x3
	124	#define TWSI_CTRL_WRITE_FREQ_SEL_SHIFT 24
	125
	126	#define REG_PCIE_DEV_MISC_CTRL 0x21C
	127	#define PCIE_DEV_MISC_CTRL_EXT_PIPE 0x2
	128	#define PCIE_DEV_MISC_CTRL_RETRY_BUFDIS 0x1
	129	#define PCIE_DEV_MISC_CTRL_SPIROM_EXIST 0x4
	130	#define PCIE_DEV_MISC_CTRL_SERDES_ENDIAN 0x8
	131	#define PCIE_DEV_MISC_CTRL_SERDES_SEL_DIN 0x10
	132
	133	#define REG_PCIE_PHYMISC 0x1000
	134	#define PCIE_PHYMISC_FORCE_RCV_DET 0x4
	135
	136	#define REG_PCIE_DLL_TX_CTRL1 0x1104
	137	#define PCIE_DLL_TX_CTRL1_SEL_NOR_CLK 0x400
	138	#define PCIE_DLL_TX_CTRL1_DEF 0x568
	139
	140	#define REG_LTSSM_TEST_MODE 0x12FC
	141	#define LTSSM_TEST_MODE_DEF 0x6500
	142
	143	/* Master Control Register */
	144	#define REG_MASTER_CTRL 0x1400
	145	#define MASTER_CTRL_SOFT_RST 0x1
	146	#define MASTER_CTRL_MTIMER_EN 0x2
	147	#define MASTER_CTRL_ITIMER_EN 0x4
	148	#define MASTER_CTRL_MANUAL_INT 0x8
	149	#define MASTER_CTRL_REV_NUM_SHIFT 16
	150	#define MASTER_CTRL_REV_NUM_MASK 0xFF
	151	#define MASTER_CTRL_DEV_ID_SHIFT 24
	152	#define MASTER_CTRL_DEV_ID_MASK 0xFF
	153
	154	/* Timer Initial Value Register */
	155	#define REG_MANUAL_TIMER_INIT 0x1404
	156
	157	/* IRQ Moderator Timer Initial Value Register */
	158	#define REG_IRQ_MODU_TIMER_INIT 0x1408
	159
	160	#define REG_PHY_ENABLE 0x140C
	161
	162	/* IRQ Anti-Lost Timer Initial Value Register */
	163	#define REG_CMBDISDMA_TIMER 0x140E
	164
	165	/* Block IDLE Status Register */
	166	#define REG_IDLE_STATUS 0x1410
	167
	168	/* MDIO Control Register */
	169	#define REG_MDIO_CTRL 0x1414
	170	#define MDIO_DATA_MASK 0xFFFF
	171	#define MDIO_DATA_SHIFT 0
	172	#define MDIO_REG_ADDR_MASK 0x1F
	173	#define MDIO_REG_ADDR_SHIFT 16
	174	#define MDIO_RW 0x200000
	175	#define MDIO_SUP_PREAMBLE 0x400000
	176	#define MDIO_START 0x800000
	177	#define MDIO_CLK_SEL_SHIFT 24
	178	#define MDIO_CLK_25_4 0
	179	#define MDIO_CLK_25_6 2
	180	#define MDIO_CLK_25_8 3
	181	#define MDIO_CLK_25_10 4
	182	#define MDIO_CLK_25_14 5
	183	#define MDIO_CLK_25_20 6
	184	#define MDIO_CLK_25_28 7
	185	#define MDIO_BUSY 0x8000000
	186
	187	/* MII PHY Status Register */
	188	#define REG_PHY_STATUS 0x1418
	189
	190	/* BIST Control and Status Register0 (for the Packet Memory) */
	191	#define REG_BIST0_CTRL 0x141C
	192	#define BIST0_NOW 0x1
	193	#define BIST0_SRAM_FAIL 0x2
	194	#define BIST0_FUSE_FLAG 0x4
	195	#define REG_BIST1_CTRL 0x1420
	196	#define BIST1_NOW 0x1
	197	#define BIST1_SRAM_FAIL 0x2
	198	#define BIST1_FUSE_FLAG 0x4
	199
	200	/* SerDes Lock Detect Control and Status Register */
	201	#define REG_SERDES_LOCK 0x1424
	202	#define SERDES_LOCK_DETECT 1
	203	#define SERDES_LOCK_DETECT_EN 2
	204
	205	/* MAC Control Register */
	206	#define REG_MAC_CTRL 0x1480
	207	#define MAC_CTRL_TX_EN 1
	208	#define MAC_CTRL_RX_EN 2
	209	#define MAC_CTRL_TX_FLOW 4
	210	#define MAC_CTRL_RX_FLOW 8
	211	#define MAC_CTRL_LOOPBACK 0x10
	212	#define MAC_CTRL_DUPLX 0x20
	213	#define MAC_CTRL_ADD_CRC 0x40
	214	#define MAC_CTRL_PAD 0x80
	215	#define MAC_CTRL_LENCHK 0x100
	216	#define MAC_CTRL_HUGE_EN 0x200
	217	#define MAC_CTRL_PRMLEN_SHIFT 10
	218	#define MAC_CTRL_PRMLEN_MASK 0xF
	219	#define MAC_CTRL_RMV_VLAN 0x4000
	220	#define MAC_CTRL_PROMIS_EN 0x8000
	221	#define MAC_CTRL_MC_ALL_EN 0x2000000
	222	#define MAC_CTRL_BC_EN 0x4000000
	223
	224	/* MAC IPG/IFG Control Register */
	225	#define REG_MAC_IPG_IFG 0x1484
	226	#define MAC_IPG_IFG_IPGT_SHIFT 0
	227	#define MAC_IPG_IFG_IPGT_MASK 0x7F
	228	#define MAC_IPG_IFG_MIFG_SHIFT 8
	229	#define MAC_IPG_IFG_MIFG_MASK 0xFF
	230	#define MAC_IPG_IFG_IPGR1_SHIFT 16
	231	#define MAC_IPG_IFG_IPGR1_MASK 0x7F
	232	#define MAC_IPG_IFG_IPGR2_SHIFT 24
	233	#define MAC_IPG_IFG_IPGR2_MASK 0x7F
	234
	235	/* MAC STATION ADDRESS */
	236	#define REG_MAC_STA_ADDR 0x1488
	237
	238	/* Hash table for multicast address */
	239	#define REG_RX_HASH_TABLE 0x1490
	240
	241	/* MAC Half-Duplex Control Register */
	242	#define REG_MAC_HALF_DUPLX_CTRL 0x1498
	243	#define MAC_HALF_DUPLX_CTRL_LCOL_SHIFT 0
	244	#define MAC_HALF_DUPLX_CTRL_LCOL_MASK 0x3FF
	245	#define MAC_HALF_DUPLX_CTRL_RETRY_SHIFT 12
	246	#define MAC_HALF_DUPLX_CTRL_RETRY_MASK 0xF
	247	#define MAC_HALF_DUPLX_CTRL_EXC_DEF_EN 0x10000
	248	#define MAC_HALF_DUPLX_CTRL_NO_BACK_C 0x20000
	249	#define MAC_HALF_DUPLX_CTRL_NO_BACK_P 0x40000
	250	#define MAC_HALF_DUPLX_CTRL_ABEBE 0x80000
	251	#define MAC_HALF_DUPLX_CTRL_ABEBT_SHIFT 20
	252	#define MAC_HALF_DUPLX_CTRL_ABEBT_MASK 0xF
	253	#define MAC_HALF_DUPLX_CTRL_JAMIPG_SHIFT 24
	254	#define MAC_HALF_DUPLX_CTRL_JAMIPG_MASK 0xF
	255
	256	/* Maximum Frame Length Control Register */
	257	#define REG_MTU 0x149C
	258
	259	/* Wake-On-Lan control register */
	260	#define REG_WOL_CTRL 0x14A0
	261	#define WOL_PATTERN_EN 0x1
	262	#define WOL_PATTERN_PME_EN 0x2
	263	#define WOL_MAGIC_EN 0x4
	264	#define WOL_MAGIC_PME_EN 0x8
	265	#define WOL_LINK_CHG_EN 0x10
	266	#define WOL_LINK_CHG_PME_EN 0x20
	267	#define WOL_PATTERN_ST 0x100
	268	#define WOL_MAGIC_ST 0x200
	269	#define WOL_LINKCHG_ST 0x400
	270	#define WOL_PT0_EN 0x10000
	271	#define WOL_PT1_EN 0x20000
	272	#define WOL_PT2_EN 0x40000
	273	#define WOL_PT3_EN 0x80000
	274	#define WOL_PT4_EN 0x100000
	275	#define WOL_PT0_MATCH 0x1000000
	276	#define WOL_PT1_MATCH 0x2000000
	277	#define WOL_PT2_MATCH 0x4000000
	278	#define WOL_PT3_MATCH 0x8000000
	279	#define WOL_PT4_MATCH 0x10000000
	280
	281	/* Internal SRAM Partition Register, high 32 bits */
	282	#define REG_SRAM_RFD_ADDR 0x1500
	283
	284	/* Descriptor Control register, high 32 bits */
	285	#define REG_DESC_BASE_ADDR_HI 0x1540
	286
	287	/* Interrupt Status Register */
	288	#define REG_ISR 0x1600
	289	#define ISR_UR_DETECTED 0x1000000
	290	#define ISR_FERR_DETECTED 0x2000000
	291	#define ISR_NFERR_DETECTED 0x4000000
	292	#define ISR_CERR_DETECTED 0x8000000
	293	#define ISR_PHY_LINKDOWN 0x10000000
	294	#define ISR_DIS_INT 0x80000000
	295
	296	/* Interrupt Mask Register */
	297	#define REG_IMR 0x1604
	298
	299	#define REG_RFD_RRD_IDX 0x1800
	300	#define REG_TPD_IDX 0x1804
	301
	302	/* MII definitions */
	303
	304	/* PHY Common Register */
	305	#define MII_ATLX_CR 0x09
	306	#define MII_ATLX_SR 0x0A
	307	#define MII_ATLX_ESR 0x0F
	308	#define MII_ATLX_PSCR 0x10
	309	#define MII_ATLX_PSSR 0x11
	310
	311	/* PHY Control Register */
	312	#define MII_CR_SPEED_SELECT_MSB 0x0040 /* bits 6,13: 10=1000, 01=100,
	313	* 00=10
	314	*/
	315	#define MII_CR_COLL_TEST_ENABLE 0x0080 /* Collision test enable */
	316	#define MII_CR_FULL_DUPLEX 0x0100 /* FDX =1, half duplex =0 */
	317	#define MII_CR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */
	318	#define MII_CR_ISOLATE 0x0400 /* Isolate PHY from MII */
	319	#define MII_CR_POWER_DOWN 0x0800 /* Power down */
	320	#define MII_CR_AUTO_NEG_EN 0x1000 /* Auto Neg Enable */
	321	#define MII_CR_SPEED_SELECT_LSB 0x2000 /* bits 6,13: 10=1000, 01=100,
	322	* 00=10
	323	*/
	324	#define MII_CR_LOOPBACK 0x4000 /* 0 = normal, 1 = loopback */
	325	#define MII_CR_RESET 0x8000 /* 0 = normal, 1 = PHY reset */
	326	#define MII_CR_SPEED_MASK 0x2040
	327	#define MII_CR_SPEED_1000 0x0040
	328	#define MII_CR_SPEED_100 0x2000
	329	#define MII_CR_SPEED_10 0x0000
	330
	331	/* PHY Status Register */
	332	#define MII_SR_EXTENDED_CAPS 0x0001 /* Ext register capabilities */
	333	#define MII_SR_JABBER_DETECT 0x0002 /* Jabber Detected */
	334	#define MII_SR_LINK_STATUS 0x0004 /* Link Status 1 = link */
	335	#define MII_SR_AUTONEG_CAPS 0x0008 /* Auto Neg Capable */
	336	#define MII_SR_REMOTE_FAULT 0x0010 /* Remote Fault Detect */
	337	#define MII_SR_AUTONEG_COMPLETE 0x0020 /* Auto Neg Complete */
	338	#define MII_SR_PREAMBLE_SUPPRESS 0x0040 /* Preamble may be suppressed */
	339	#define MII_SR_EXTENDED_STATUS 0x0100 /* Ext stat info in Reg 0x0F */
	340	#define MII_SR_100T2_HD_CAPS 0x0200 /* 100T2 Half Duplex Capable */
	341	#define MII_SR_100T2_FD_CAPS 0x0400 /* 100T2 Full Duplex Capable */
	342	#define MII_SR_10T_HD_CAPS 0x0800 /* 10T Half Duplex Capable */
	343	#define MII_SR_10T_FD_CAPS 0x1000 /* 10T Full Duplex Capable */
	344	#define MII_SR_100X_HD_CAPS 0x2000 /* 100X Half Duplex Capable */
	345	#define MII_SR_100X_FD_CAPS 0x4000 /* 100X Full Duplex Capable */
	346	#define MII_SR_100T4_CAPS 0x8000 /* 100T4 Capable */
	347
	348	/* Link partner ability register */
	349	#define MII_LPA_SLCT 0x001f /* Same as advertise selector */
	350	#define MII_LPA_10HALF 0x0020 /* Can do 10mbps half-duplex */
	351	#define MII_LPA_10FULL 0x0040 /* Can do 10mbps full-duplex */
	352	#define MII_LPA_100HALF 0x0080 /* Can do 100mbps half-duplex */
	353	#define MII_LPA_100FULL 0x0100 /* Can do 100mbps full-duplex */
	354	#define MII_LPA_100BASE4 0x0200 /* 100BASE-T4 */
	355	#define MII_LPA_PAUSE 0x0400 /* PAUSE */
	356	#define MII_LPA_ASYPAUSE 0x0800 /* Asymmetrical PAUSE */
	357	#define MII_LPA_RFAULT 0x2000 /* Link partner faulted */
	358	#define MII_LPA_LPACK 0x4000 /* Link partner acked us */
	359	#define MII_LPA_NPAGE 0x8000 /* Next page bit */
	360
	361	/* Autoneg Advertisement Register */
	362	#define MII_AR_SELECTOR_FIELD 0x0001 /* IEEE 802.3 CSMA/CD */
	363	#define MII_AR_10T_HD_CAPS 0x0020 /* 10T Half Duplex Capable */
	364	#define MII_AR_10T_FD_CAPS 0x0040 /* 10T Full Duplex Capable */
	365	#define MII_AR_100TX_HD_CAPS 0x0080 /* 100TX Half Duplex Capable */
	366	#define MII_AR_100TX_FD_CAPS 0x0100 /* 100TX Full Duplex Capable */
	367	#define MII_AR_100T4_CAPS 0x0200 /* 100T4 Capable */
	368	#define MII_AR_PAUSE 0x0400 /* Pause operation desired */
	369	#define MII_AR_ASM_DIR 0x0800 /* Asymmetric Pause Dir bit */
	370	#define MII_AR_REMOTE_FAULT 0x2000 /* Remote Fault detected */
	371	#define MII_AR_NEXT_PAGE 0x8000 /* Next Page ability support */
	372	#define MII_AR_SPEED_MASK 0x01E0
	373	#define MII_AR_DEFAULT_CAP_MASK 0x0DE0
	374
	375	/* 1000BASE-T Control Register */
	376	#define MII_ATLX_CR_1000T_HD_CAPS 0x0100 /* Adv 1000T HD cap */
	377	#define MII_ATLX_CR_1000T_FD_CAPS 0x0200 /* Adv 1000T FD cap */
	378	#define MII_ATLX_CR_1000T_REPEATER_DTE 0x0400 /* 1=Repeater/switch device,
	379	* 0=DTE device */
	380	#define MII_ATLX_CR_1000T_MS_VALUE 0x0800 /* 1=Config PHY as Master,
	381	* 0=Configure PHY as Slave */
	382	#define MII_ATLX_CR_1000T_MS_ENABLE 0x1000 /* 1=Man Master/Slave config,
	383	* 0=Auto Master/Slave config
	384	*/
	385	#define MII_ATLX_CR_1000T_TEST_MODE_NORMAL 0x0000 /* Normal Operation */
	386	#define MII_ATLX_CR_1000T_TEST_MODE_1 0x2000 /* Transmit Waveform test */
	387	#define MII_ATLX_CR_1000T_TEST_MODE_2 0x4000 /* Master Xmit Jitter test */
	388	#define MII_ATLX_CR_1000T_TEST_MODE_3 0x6000 /* Slave Xmit Jitter test */
	389	#define MII_ATLX_CR_1000T_TEST_MODE_4 0x8000 /* Xmitter Distortion test */
	390	#define MII_ATLX_CR_1000T_SPEED_MASK 0x0300
	391	#define MII_ATLX_CR_1000T_DEFAULT_CAP_MASK 0x0300
	392
	393	/* 1000BASE-T Status Register */
	394	#define MII_ATLX_SR_1000T_LP_HD_CAPS 0x0400 /* LP is 1000T HD capable */
	395	#define MII_ATLX_SR_1000T_LP_FD_CAPS 0x0800 /* LP is 1000T FD capable */
	396	#define MII_ATLX_SR_1000T_REMOTE_RX_STATUS 0x1000 /* Remote receiver OK */
	397	#define MII_ATLX_SR_1000T_LOCAL_RX_STATUS 0x2000 /* Local receiver OK */
	398	#define MII_ATLX_SR_1000T_MS_CONFIG_RES 0x4000 /* 1=Local TX is Master
	399	* 0=Slave
	400	*/
	401	#define MII_ATLX_SR_1000T_MS_CONFIG_FAULT 0x8000 /* Master/Slave config
	402	* fault */
	403	#define MII_ATLX_SR_1000T_REMOTE_RX_STATUS_SHIFT 12
	404	#define MII_ATLX_SR_1000T_LOCAL_RX_STATUS_SHIFT 13
	405
	406	/* Extended Status Register */
	407	#define MII_ATLX_ESR_1000T_HD_CAPS 0x1000 /* 1000T HD capable */
	408	#define MII_ATLX_ESR_1000T_FD_CAPS 0x2000 /* 1000T FD capable */
	409	#define MII_ATLX_ESR_1000X_HD_CAPS 0x4000 /* 1000X HD capable */
	410	#define MII_ATLX_ESR_1000X_FD_CAPS 0x8000 /* 1000X FD capable */
	411
	412	/* ATLX PHY Specific Control Register */
	413	#define MII_ATLX_PSCR_JABBER_DISABLE 0x0001 /* 1=Jabber Func disabled */
	414	#define MII_ATLX_PSCR_POLARITY_REVERSAL 0x0002 /* 1=Polarity Reversal enbld */
	415	#define MII_ATLX_PSCR_SQE_TEST 0x0004 /* 1=SQE Test enabled */
	416	#define MII_ATLX_PSCR_MAC_POWERDOWN 0x0008
	417	#define MII_ATLX_PSCR_CLK125_DISABLE 0x0010 /* 1=CLK125 low
	418	* 0=CLK125 toggling
	419	*/
	420	#define MII_ATLX_PSCR_MDI_MANUAL_MODE 0x0000 /* MDI Crossover Mode bits 6:5,
	421	* Manual MDI configuration
	422	*/
	423	#define MII_ATLX_PSCR_MDIX_MANUAL_MODE 0x0020 /* Manual MDIX configuration */
	424	#define MII_ATLX_PSCR_AUTO_X_1000T 0x0040 /* 1000BASE-T: Auto crossover
	425	* 100BASE-TX/10BASE-T: MDI
	426	* Mode */
	427	#define MII_ATLX_PSCR_AUTO_X_MODE 0x0060 /* Auto crossover enabled
	428	* all speeds.
	429	*/
	430	#define MII_ATLX_PSCR_10BT_EXT_DIST_ENABLE 0x0080 /* 1=Enable Extended
	431	* 10BASE-T distance
	432	* (Lower 10BASE-T RX
	433	* Threshold)
	434	* 0=Normal 10BASE-T RX
	435	* Threshold
	436	*/
	437	#define MII_ATLX_PSCR_MII_5BIT_ENABLE 0x0100 /* 1=5-Bit interface in
	438	* 100BASE-TX
	439	* 0=MII interface in
	440	* 100BASE-TX
	441	*/
	442	#define MII_ATLX_PSCR_SCRAMBLER_DISABLE 0x0200 /* 1=Scrambler dsbl */
	443	#define MII_ATLX_PSCR_FORCE_LINK_GOOD 0x0400 /* 1=Force link good */
	444	#define MII_ATLX_PSCR_ASSERT_CRS_ON_TX 0x0800 /* 1=Assert CRS on Transmit */
	445	#define MII_ATLX_PSCR_POLARITY_REVERSAL_SHIFT 1
	446	#define MII_ATLX_PSCR_AUTO_X_MODE_SHIFT 5
	447	#define MII_ATLX_PSCR_10BT_EXT_DIST_ENABLE_SHIFT 7
	448
	449	/* ATLX PHY Specific Status Register */
	450	#define MII_ATLX_PSSR_SPD_DPLX_RESOLVED 0x0800 /* 1=Speed & Duplex resolved */
	451	#define MII_ATLX_PSSR_DPLX 0x2000 /* 1=Duplex 0=Half Duplex */
	452	#define MII_ATLX_PSSR_SPEED 0xC000 /* Speed, bits 14:15 */
	453	#define MII_ATLX_PSSR_10MBS 0x0000 /* 00=10Mbs */
	454	#define MII_ATLX_PSSR_100MBS 0x4000 /* 01=100Mbs */
	455	#define MII_ATLX_PSSR_1000MBS 0x8000 /* 10=1000Mbs */
	456
	457	#define MII_DBG_ADDR 0x1D
	458	#define MII_DBG_DATA 0x1E
	459
	460	/* PCI Command Register Bit Definitions */
	461	#define PCI_REG_COMMAND 0x04 /* PCI Command Register */
	462	#define CMD_IO_SPACE 0x0001
	463	#define CMD_MEMORY_SPACE 0x0002
	464	#define CMD_BUS_MASTER 0x0004
	465
	466	/* Wake Up Filter Control */
	467	#define ATLX_WUFC_LNKC 0x00000001 /* Link Status Change Wakeup Enable */
	468	#define ATLX_WUFC_MAG 0x00000002 /* Magic Packet Wakeup Enable */
	469	#define ATLX_WUFC_EX 0x00000004 /* Directed Exact Wakeup Enable */
	470	#define ATLX_WUFC_MC 0x00000008 /* Multicast Wakeup Enable */
	471	#define ATLX_WUFC_BC 0x00000010 /* Broadcast Wakeup Enable */
	472
	473	#define ADVERTISE_10_HALF 0x0001
	474	#define ADVERTISE_10_FULL 0x0002
	475	#define ADVERTISE_100_HALF 0x0004
	476	#define ADVERTISE_100_FULL 0x0008
	477	#define ADVERTISE_1000_HALF 0x0010
	478	#define ADVERTISE_1000_FULL 0x0020
	479	#define AUTONEG_ADVERTISE_10_100_ALL 0x000F /* All 10/100 speeds */
	480	#define AUTONEG_ADVERTISE_10_ALL 0x0003 /* 10Mbps Full & Half speeds */
	481
	482	#define PHY_AUTO_NEG_TIME 45 /* 4.5 Seconds */
	483	#define PHY_FORCE_TIME 20 /* 2.0 Seconds */
	484
	485	/* For checksumming, the sum of all words in the EEPROM should equal 0xBABA */
	486	#define EEPROM_SUM 0xBABA
	487	#define NODE_ADDRESS_SIZE 6
	488
	489	struct atlx_spi_flash_dev {
	490	const char manu_name; / manufacturer id */
	491	/* op-code */
	492	u8 cmd_wrsr;
	493	u8 cmd_read;
	494	u8 cmd_program;
	495	u8 cmd_wren;
	496	u8 cmd_wrdi;
	497	u8 cmd_rdsr;
	498	u8 cmd_rdid;
	499	u8 cmd_sector_erase;
	500	u8 cmd_chip_erase;
	501	};
	502
	503	#endif /* ATLX_H */