5 files changed, 19 insertions, 7 deletions

diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 690255c7d4dc..132378b89d76 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -2068,6 +2068,9 @@ static int mmc_rescan_try_freq(struct mmc_host *host, unsigned freq)
          */
         mmc_hw_reset_for_init(host);
 
+        /* Initialization should be done at 3.3 V I/O voltage. */
+        mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330, 0);
+
         /*
          * sdio_reset sends CMD52 to reset card.  Since we do not know
          * if the card is being re-initialized, just send it.  CMD52
diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c
index 30055f2b0d44..c3704e293a7b 100644
--- a/drivers/mmc/core/host.c
+++ b/drivers/mmc/core/host.c
@@ -238,10 +238,10 @@ static inline void mmc_host_clk_init(struct mmc_host *host)
         /* Hold MCI clock for 8 cycles by default */
         host->clk_delay = 8;
         /*
-         * Default clock gating delay is 200ms.
+         * Default clock gating delay is 0ms to avoid wasting power.
          * This value can be tuned by writing into sysfs entry.
          */
-        host->clkgate_delay = 200;
+        host->clkgate_delay = 0;
         host->clk_gated = false;
         INIT_DELAYED_WORK(&host->clk_gate_work, mmc_host_clk_gate_work);
         spin_lock_init(&host->clk_lock);
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index a48066344fa8..2b9ed1401dc4 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -816,6 +816,9 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
         if (!mmc_host_is_spi(host))
                 mmc_set_bus_mode(host, MMC_BUSMODE_OPENDRAIN);
 
+        /* Initialization should be done at 3.3 V I/O voltage. */
+        mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330, 0);
+
         /*
          * Since we're changing the OCR value, we seem to
          * need to tell some cards to go back to the idle
diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
index 5017f9354ce2..c272c6868ecf 100644
--- a/drivers/mmc/core/sd.c
+++ b/drivers/mmc/core/sd.c
@@ -911,6 +911,9 @@ static int mmc_sd_init_card(struct mmc_host *host, u32 ocr,
         BUG_ON(!host);
         WARN_ON(!host->claimed);
 
+        /* The initialization should be done at 3.3 V I/O voltage. */
+        mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330, 0);
+
         err = mmc_sd_get_cid(host, ocr, cid, &rocr);
         if (err)
                 return err;
@@ -1156,11 +1159,6 @@ int mmc_attach_sd(struct mmc_host *host)
         BUG_ON(!host);
         WARN_ON(!host->claimed);
 
-        /* Make sure we are at 3.3V signalling voltage */
-        err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330, false);
-        if (err)
-                return err;
-
         /* Disable preset value enable if already set since last time */
         if (host->ops->enable_preset_value) {
                 mmc_host_clk_hold(host);
diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
index 12cde6ee17f5..2c7c83f832d2 100644
--- a/drivers/mmc/core/sdio.c
+++ b/drivers/mmc/core/sdio.c
@@ -585,6 +585,9 @@ static int mmc_sdio_init_card(struct mmc_host *host, u32 ocr,
          * Inform the card of the voltage
          */
         if (!powered_resume) {
+                /* The initialization should be done at 3.3 V I/O voltage. */
+                mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330, 0);
+
                 err = mmc_send_io_op_cond(host, host->ocr, &ocr);
                 if (err)
                         goto err;
@@ -996,6 +999,11 @@ static int mmc_sdio_power_restore(struct mmc_host *host)
          * With these steps taken, mmc_select_voltage() is also required to
          * restore the correct voltage setting of the card.
          */
+
+        /* The initialization should be done at 3.3 V I/O voltage. */
+        if (!mmc_card_keep_power(host))
+                mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330, 0);
+
         sdio_reset(host);
         mmc_go_idle(host);
         mmc_send_if_cond(host, host->ocr_avail);