1 files changed, 170 insertions, 0 deletions

diff --git a/drivers/media/pci/mantis/mantis_pci.c b/drivers/media/pci/mantis/mantis_pci.c
new file mode 100644
index 000000000000..371558af2d96
--- /dev/null
+++ b/drivers/media/pci/mantis/mantis_pci.c
@@ -0,0 +1,170 @@
+/*
+        Mantis PCI bridge driver
+
+        Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+        This program is free software; you can redistribute it and/or modify
+        it under the terms of the GNU General Public License as published by
+        the Free Software Foundation; either version 2 of the License, or
+        (at your option) any later version.
+
+        This program is distributed in the hope that it will be useful,
+        but WITHOUT ANY WARRANTY; without even the implied warranty of
+        MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+        GNU General Public License for more details.
+
+        You should have received a copy of the GNU General Public License
+        along with this program; if not, write to the Free Software
+        Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <asm/io.h>
+#include <asm/page.h>
+#include <linux/kmod.h>
+#include <linux/vmalloc.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/pci.h>
+
+#include <asm/irq.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "mantis_common.h"
+#include "mantis_reg.h"
+#include "mantis_pci.h"
+
+#define DRIVER_NAME             "Mantis Core"
+
+int __devinit mantis_pci_init(struct mantis_pci *mantis)
+{
+        u8 latency;
+        struct mantis_hwconfig *config  = mantis->hwconfig;
+        struct pci_dev *pdev            = mantis->pdev;
+        int err, ret = 0;
+
+        dprintk(MANTIS_ERROR, 0, "found a %s PCI %s device on (%02x:%02x.%x),\n",
+                config->model_name,
+                config->dev_type,
+                mantis->pdev->bus->number,
+                PCI_SLOT(mantis->pdev->devfn),
+                PCI_FUNC(mantis->pdev->devfn));
+
+        err = pci_enable_device(pdev);
+        if (err != 0) {
+                ret = -ENODEV;
+                dprintk(MANTIS_ERROR, 1, "ERROR: PCI enable failed <%i>", err);
+                goto fail0;
+        }
+
+        err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+        if (err != 0) {
+                dprintk(MANTIS_ERROR, 1, "ERROR: Unable to obtain 32 bit DMA <%i>", err);
+                ret = -ENOMEM;
+                goto fail1;
+        }
+
+        pci_set_master(pdev);
+
+        if (!request_mem_region(pci_resource_start(pdev, 0),
+                                pci_resource_len(pdev, 0),
+                                DRIVER_NAME)) {
+
+                dprintk(MANTIS_ERROR, 1, "ERROR: BAR0 Request failed !");
+                ret = -ENODEV;
+                goto fail1;
+        }
+
+        mantis->mmio = ioremap(pci_resource_start(pdev, 0),
+                               pci_resource_len(pdev, 0));
+
+        if (!mantis->mmio) {
+                dprintk(MANTIS_ERROR, 1, "ERROR: BAR0 remap failed !");
+                ret = -ENODEV;
+                goto fail2;
+        }
+
+        pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &latency);
+        mantis->latency = latency;
+        mantis->revision = pdev->revision;
+
+        dprintk(MANTIS_ERROR, 0, "    Mantis Rev %d [%04x:%04x], ",
+                mantis->revision,
+                mantis->pdev->subsystem_vendor,
+                mantis->pdev->subsystem_device);
+
+        dprintk(MANTIS_ERROR, 0,
+                "irq: %d, latency: %d\n    memory: 0x%lx, mmio: 0x%p\n",
+                mantis->pdev->irq,
+                mantis->latency,
+                mantis->mantis_addr,
+                mantis->mmio);
+
+        err = request_irq(pdev->irq,
+                          config->irq_handler,
+                          IRQF_SHARED,
+                          DRIVER_NAME,
+                          mantis);
+
+        if (err != 0) {
+
+                dprintk(MANTIS_ERROR, 1, "ERROR: IRQ registration failed ! <%d>", err);
+                ret = -ENODEV;
+                goto fail3;
+        }
+
+        pci_set_drvdata(pdev, mantis);
+        return ret;
+
+        /* Error conditions */
+fail3:
+        dprintk(MANTIS_ERROR, 1, "ERROR: <%d> I/O unmap", ret);
+        if (mantis->mmio)
+                iounmap(mantis->mmio);
+
+fail2:
+        dprintk(MANTIS_ERROR, 1, "ERROR: <%d> releasing regions", ret);
+        release_mem_region(pci_resource_start(pdev, 0),
+                           pci_resource_len(pdev, 0));
+
+fail1:
+        dprintk(MANTIS_ERROR, 1, "ERROR: <%d> disabling device", ret);
+        pci_disable_device(pdev);
+
+fail0:
+        dprintk(MANTIS_ERROR, 1, "ERROR: <%d> exiting", ret);
+        pci_set_drvdata(pdev, NULL);
+        return ret;
+}
+EXPORT_SYMBOL_GPL(mantis_pci_init);
+
+void mantis_pci_exit(struct mantis_pci *mantis)
+{
+        struct pci_dev *pdev = mantis->pdev;
+
+        dprintk(MANTIS_NOTICE, 1, " mem: 0x%p", mantis->mmio);
+        free_irq(pdev->irq, mantis);
+        if (mantis->mmio) {
+                iounmap(mantis->mmio);
+                release_mem_region(pci_resource_start(pdev, 0),
+                                   pci_resource_len(pdev, 0));
+        }
+
+        pci_disable_device(pdev);
+        pci_set_drvdata(pdev, NULL);
+}
+EXPORT_SYMBOL_GPL(mantis_pci_exit);
+
+MODULE_DESCRIPTION("Mantis PCI DTV bridge driver");
+MODULE_AUTHOR("Manu Abraham");
+MODULE_LICENSE("GPL");