aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/infiniband/hw/ipath/ipath_ht400.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/infiniband/hw/ipath/ipath_ht400.c')
-rw-r--r--drivers/infiniband/hw/ipath/ipath_ht400.c1586
1 files changed, 1586 insertions, 0 deletions
diff --git a/drivers/infiniband/hw/ipath/ipath_ht400.c b/drivers/infiniband/hw/ipath/ipath_ht400.c
new file mode 100644
index 000000000000..4652435998f3
--- /dev/null
+++ b/drivers/infiniband/hw/ipath/ipath_ht400.c
@@ -0,0 +1,1586 @@
1/*
2 * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
3 *
4 * This software is available to you under a choice of one of two
5 * licenses. You may choose to be licensed under the terms of the GNU
6 * General Public License (GPL) Version 2, available from the file
7 * COPYING in the main directory of this source tree, or the
8 * OpenIB.org BSD license below:
9 *
10 * Redistribution and use in source and binary forms, with or
11 * without modification, are permitted provided that the following
12 * conditions are met:
13 *
14 * - Redistributions of source code must retain the above
15 * copyright notice, this list of conditions and the following
16 * disclaimer.
17 *
18 * - Redistributions in binary form must reproduce the above
19 * copyright notice, this list of conditions and the following
20 * disclaimer in the documentation and/or other materials
21 * provided with the distribution.
22 *
23 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
24 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
25 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
26 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
27 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
28 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
29 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
30 * SOFTWARE.
31 */
32
33/*
34 * This file contains all of the code that is specific to the InfiniPath
35 * HT-400 chip.
36 */
37
38#include <linux/pci.h>
39#include <linux/delay.h>
40
41#include "ipath_kernel.h"
42#include "ipath_registers.h"
43
44/*
45 * This lists the InfiniPath HT400 registers, in the actual chip layout.
46 * This structure should never be directly accessed.
47 *
48 * The names are in InterCap form because they're taken straight from
49 * the chip specification. Since they're only used in this file, they
50 * don't pollute the rest of the source.
51*/
52
53struct _infinipath_do_not_use_kernel_regs {
54 unsigned long long Revision;
55 unsigned long long Control;
56 unsigned long long PageAlign;
57 unsigned long long PortCnt;
58 unsigned long long DebugPortSelect;
59 unsigned long long DebugPort;
60 unsigned long long SendRegBase;
61 unsigned long long UserRegBase;
62 unsigned long long CounterRegBase;
63 unsigned long long Scratch;
64 unsigned long long ReservedMisc1;
65 unsigned long long InterruptConfig;
66 unsigned long long IntBlocked;
67 unsigned long long IntMask;
68 unsigned long long IntStatus;
69 unsigned long long IntClear;
70 unsigned long long ErrorMask;
71 unsigned long long ErrorStatus;
72 unsigned long long ErrorClear;
73 unsigned long long HwErrMask;
74 unsigned long long HwErrStatus;
75 unsigned long long HwErrClear;
76 unsigned long long HwDiagCtrl;
77 unsigned long long MDIO;
78 unsigned long long IBCStatus;
79 unsigned long long IBCCtrl;
80 unsigned long long ExtStatus;
81 unsigned long long ExtCtrl;
82 unsigned long long GPIOOut;
83 unsigned long long GPIOMask;
84 unsigned long long GPIOStatus;
85 unsigned long long GPIOClear;
86 unsigned long long RcvCtrl;
87 unsigned long long RcvBTHQP;
88 unsigned long long RcvHdrSize;
89 unsigned long long RcvHdrCnt;
90 unsigned long long RcvHdrEntSize;
91 unsigned long long RcvTIDBase;
92 unsigned long long RcvTIDCnt;
93 unsigned long long RcvEgrBase;
94 unsigned long long RcvEgrCnt;
95 unsigned long long RcvBufBase;
96 unsigned long long RcvBufSize;
97 unsigned long long RxIntMemBase;
98 unsigned long long RxIntMemSize;
99 unsigned long long RcvPartitionKey;
100 unsigned long long ReservedRcv[10];
101 unsigned long long SendCtrl;
102 unsigned long long SendPIOBufBase;
103 unsigned long long SendPIOSize;
104 unsigned long long SendPIOBufCnt;
105 unsigned long long SendPIOAvailAddr;
106 unsigned long long TxIntMemBase;
107 unsigned long long TxIntMemSize;
108 unsigned long long ReservedSend[9];
109 unsigned long long SendBufferError;
110 unsigned long long SendBufferErrorCONT1;
111 unsigned long long SendBufferErrorCONT2;
112 unsigned long long SendBufferErrorCONT3;
113 unsigned long long ReservedSBE[4];
114 unsigned long long RcvHdrAddr0;
115 unsigned long long RcvHdrAddr1;
116 unsigned long long RcvHdrAddr2;
117 unsigned long long RcvHdrAddr3;
118 unsigned long long RcvHdrAddr4;
119 unsigned long long RcvHdrAddr5;
120 unsigned long long RcvHdrAddr6;
121 unsigned long long RcvHdrAddr7;
122 unsigned long long RcvHdrAddr8;
123 unsigned long long ReservedRHA[7];
124 unsigned long long RcvHdrTailAddr0;
125 unsigned long long RcvHdrTailAddr1;
126 unsigned long long RcvHdrTailAddr2;
127 unsigned long long RcvHdrTailAddr3;
128 unsigned long long RcvHdrTailAddr4;
129 unsigned long long RcvHdrTailAddr5;
130 unsigned long long RcvHdrTailAddr6;
131 unsigned long long RcvHdrTailAddr7;
132 unsigned long long RcvHdrTailAddr8;
133 unsigned long long ReservedRHTA[7];
134 unsigned long long Sync; /* Software only */
135 unsigned long long Dump; /* Software only */
136 unsigned long long SimVer; /* Software only */
137 unsigned long long ReservedSW[5];
138 unsigned long long SerdesConfig0;
139 unsigned long long SerdesConfig1;
140 unsigned long long SerdesStatus;
141 unsigned long long XGXSConfig;
142 unsigned long long ReservedSW2[4];
143};
144
145#define IPATH_KREG_OFFSET(field) (offsetof(struct \
146 _infinipath_do_not_use_kernel_regs, field) / sizeof(u64))
147#define IPATH_CREG_OFFSET(field) (offsetof( \
148 struct infinipath_counters, field) / sizeof(u64))
149
150static const struct ipath_kregs ipath_ht_kregs = {
151 .kr_control = IPATH_KREG_OFFSET(Control),
152 .kr_counterregbase = IPATH_KREG_OFFSET(CounterRegBase),
153 .kr_debugport = IPATH_KREG_OFFSET(DebugPort),
154 .kr_debugportselect = IPATH_KREG_OFFSET(DebugPortSelect),
155 .kr_errorclear = IPATH_KREG_OFFSET(ErrorClear),
156 .kr_errormask = IPATH_KREG_OFFSET(ErrorMask),
157 .kr_errorstatus = IPATH_KREG_OFFSET(ErrorStatus),
158 .kr_extctrl = IPATH_KREG_OFFSET(ExtCtrl),
159 .kr_extstatus = IPATH_KREG_OFFSET(ExtStatus),
160 .kr_gpio_clear = IPATH_KREG_OFFSET(GPIOClear),
161 .kr_gpio_mask = IPATH_KREG_OFFSET(GPIOMask),
162 .kr_gpio_out = IPATH_KREG_OFFSET(GPIOOut),
163 .kr_gpio_status = IPATH_KREG_OFFSET(GPIOStatus),
164 .kr_hwdiagctrl = IPATH_KREG_OFFSET(HwDiagCtrl),
165 .kr_hwerrclear = IPATH_KREG_OFFSET(HwErrClear),
166 .kr_hwerrmask = IPATH_KREG_OFFSET(HwErrMask),
167 .kr_hwerrstatus = IPATH_KREG_OFFSET(HwErrStatus),
168 .kr_ibcctrl = IPATH_KREG_OFFSET(IBCCtrl),
169 .kr_ibcstatus = IPATH_KREG_OFFSET(IBCStatus),
170 .kr_intblocked = IPATH_KREG_OFFSET(IntBlocked),
171 .kr_intclear = IPATH_KREG_OFFSET(IntClear),
172 .kr_interruptconfig = IPATH_KREG_OFFSET(InterruptConfig),
173 .kr_intmask = IPATH_KREG_OFFSET(IntMask),
174 .kr_intstatus = IPATH_KREG_OFFSET(IntStatus),
175 .kr_mdio = IPATH_KREG_OFFSET(MDIO),
176 .kr_pagealign = IPATH_KREG_OFFSET(PageAlign),
177 .kr_partitionkey = IPATH_KREG_OFFSET(RcvPartitionKey),
178 .kr_portcnt = IPATH_KREG_OFFSET(PortCnt),
179 .kr_rcvbthqp = IPATH_KREG_OFFSET(RcvBTHQP),
180 .kr_rcvbufbase = IPATH_KREG_OFFSET(RcvBufBase),
181 .kr_rcvbufsize = IPATH_KREG_OFFSET(RcvBufSize),
182 .kr_rcvctrl = IPATH_KREG_OFFSET(RcvCtrl),
183 .kr_rcvegrbase = IPATH_KREG_OFFSET(RcvEgrBase),
184 .kr_rcvegrcnt = IPATH_KREG_OFFSET(RcvEgrCnt),
185 .kr_rcvhdrcnt = IPATH_KREG_OFFSET(RcvHdrCnt),
186 .kr_rcvhdrentsize = IPATH_KREG_OFFSET(RcvHdrEntSize),
187 .kr_rcvhdrsize = IPATH_KREG_OFFSET(RcvHdrSize),
188 .kr_rcvintmembase = IPATH_KREG_OFFSET(RxIntMemBase),
189 .kr_rcvintmemsize = IPATH_KREG_OFFSET(RxIntMemSize),
190 .kr_rcvtidbase = IPATH_KREG_OFFSET(RcvTIDBase),
191 .kr_rcvtidcnt = IPATH_KREG_OFFSET(RcvTIDCnt),
192 .kr_revision = IPATH_KREG_OFFSET(Revision),
193 .kr_scratch = IPATH_KREG_OFFSET(Scratch),
194 .kr_sendbuffererror = IPATH_KREG_OFFSET(SendBufferError),
195 .kr_sendctrl = IPATH_KREG_OFFSET(SendCtrl),
196 .kr_sendpioavailaddr = IPATH_KREG_OFFSET(SendPIOAvailAddr),
197 .kr_sendpiobufbase = IPATH_KREG_OFFSET(SendPIOBufBase),
198 .kr_sendpiobufcnt = IPATH_KREG_OFFSET(SendPIOBufCnt),
199 .kr_sendpiosize = IPATH_KREG_OFFSET(SendPIOSize),
200 .kr_sendregbase = IPATH_KREG_OFFSET(SendRegBase),
201 .kr_txintmembase = IPATH_KREG_OFFSET(TxIntMemBase),
202 .kr_txintmemsize = IPATH_KREG_OFFSET(TxIntMemSize),
203 .kr_userregbase = IPATH_KREG_OFFSET(UserRegBase),
204 .kr_serdesconfig0 = IPATH_KREG_OFFSET(SerdesConfig0),
205 .kr_serdesconfig1 = IPATH_KREG_OFFSET(SerdesConfig1),
206 .kr_serdesstatus = IPATH_KREG_OFFSET(SerdesStatus),
207 .kr_xgxsconfig = IPATH_KREG_OFFSET(XGXSConfig),
208 /*
209 * These should not be used directly via ipath_read_kreg64(),
210 * use them with ipath_read_kreg64_port(),
211 */
212 .kr_rcvhdraddr = IPATH_KREG_OFFSET(RcvHdrAddr0),
213 .kr_rcvhdrtailaddr = IPATH_KREG_OFFSET(RcvHdrTailAddr0)
214};
215
216static const struct ipath_cregs ipath_ht_cregs = {
217 .cr_badformatcnt = IPATH_CREG_OFFSET(RxBadFormatCnt),
218 .cr_erricrccnt = IPATH_CREG_OFFSET(RxICRCErrCnt),
219 .cr_errlinkcnt = IPATH_CREG_OFFSET(RxLinkProblemCnt),
220 .cr_errlpcrccnt = IPATH_CREG_OFFSET(RxLPCRCErrCnt),
221 .cr_errpkey = IPATH_CREG_OFFSET(RxPKeyMismatchCnt),
222 .cr_errrcvflowctrlcnt = IPATH_CREG_OFFSET(RxFlowCtrlErrCnt),
223 .cr_err_rlencnt = IPATH_CREG_OFFSET(RxLenErrCnt),
224 .cr_errslencnt = IPATH_CREG_OFFSET(TxLenErrCnt),
225 .cr_errtidfull = IPATH_CREG_OFFSET(RxTIDFullErrCnt),
226 .cr_errtidvalid = IPATH_CREG_OFFSET(RxTIDValidErrCnt),
227 .cr_errvcrccnt = IPATH_CREG_OFFSET(RxVCRCErrCnt),
228 .cr_ibstatuschange = IPATH_CREG_OFFSET(IBStatusChangeCnt),
229 /* calc from Reg_CounterRegBase + offset */
230 .cr_intcnt = IPATH_CREG_OFFSET(LBIntCnt),
231 .cr_invalidrlencnt = IPATH_CREG_OFFSET(RxMaxMinLenErrCnt),
232 .cr_invalidslencnt = IPATH_CREG_OFFSET(TxMaxMinLenErrCnt),
233 .cr_lbflowstallcnt = IPATH_CREG_OFFSET(LBFlowStallCnt),
234 .cr_pktrcvcnt = IPATH_CREG_OFFSET(RxDataPktCnt),
235 .cr_pktrcvflowctrlcnt = IPATH_CREG_OFFSET(RxFlowPktCnt),
236 .cr_pktsendcnt = IPATH_CREG_OFFSET(TxDataPktCnt),
237 .cr_pktsendflowcnt = IPATH_CREG_OFFSET(TxFlowPktCnt),
238 .cr_portovflcnt = IPATH_CREG_OFFSET(RxP0HdrEgrOvflCnt),
239 .cr_rcvebpcnt = IPATH_CREG_OFFSET(RxEBPCnt),
240 .cr_rcvovflcnt = IPATH_CREG_OFFSET(RxBufOvflCnt),
241 .cr_senddropped = IPATH_CREG_OFFSET(TxDroppedPktCnt),
242 .cr_sendstallcnt = IPATH_CREG_OFFSET(TxFlowStallCnt),
243 .cr_sendunderruncnt = IPATH_CREG_OFFSET(TxUnderrunCnt),
244 .cr_wordrcvcnt = IPATH_CREG_OFFSET(RxDwordCnt),
245 .cr_wordsendcnt = IPATH_CREG_OFFSET(TxDwordCnt),
246 .cr_unsupvlcnt = IPATH_CREG_OFFSET(TxUnsupVLErrCnt),
247 .cr_rxdroppktcnt = IPATH_CREG_OFFSET(RxDroppedPktCnt),
248 .cr_iblinkerrrecovcnt = IPATH_CREG_OFFSET(IBLinkErrRecoveryCnt),
249 .cr_iblinkdowncnt = IPATH_CREG_OFFSET(IBLinkDownedCnt),
250 .cr_ibsymbolerrcnt = IPATH_CREG_OFFSET(IBSymbolErrCnt)
251};
252
253/* kr_intstatus, kr_intclear, kr_intmask bits */
254#define INFINIPATH_I_RCVURG_MASK 0x1FF
255#define INFINIPATH_I_RCVAVAIL_MASK 0x1FF
256
257/* kr_hwerrclear, kr_hwerrmask, kr_hwerrstatus, bits */
258#define INFINIPATH_HWE_HTCMEMPARITYERR_SHIFT 0
259#define INFINIPATH_HWE_HTCMEMPARITYERR_MASK 0x3FFFFFULL
260#define INFINIPATH_HWE_HTCLNKABYTE0CRCERR 0x0000000000800000ULL
261#define INFINIPATH_HWE_HTCLNKABYTE1CRCERR 0x0000000001000000ULL
262#define INFINIPATH_HWE_HTCLNKBBYTE0CRCERR 0x0000000002000000ULL
263#define INFINIPATH_HWE_HTCLNKBBYTE1CRCERR 0x0000000004000000ULL
264#define INFINIPATH_HWE_HTCMISCERR4 0x0000000008000000ULL
265#define INFINIPATH_HWE_HTCMISCERR5 0x0000000010000000ULL
266#define INFINIPATH_HWE_HTCMISCERR6 0x0000000020000000ULL
267#define INFINIPATH_HWE_HTCMISCERR7 0x0000000040000000ULL
268#define INFINIPATH_HWE_HTCBUSTREQPARITYERR 0x0000000080000000ULL
269#define INFINIPATH_HWE_HTCBUSTRESPPARITYERR 0x0000000100000000ULL
270#define INFINIPATH_HWE_HTCBUSIREQPARITYERR 0x0000000200000000ULL
271#define INFINIPATH_HWE_COREPLL_FBSLIP 0x0080000000000000ULL
272#define INFINIPATH_HWE_COREPLL_RFSLIP 0x0100000000000000ULL
273#define INFINIPATH_HWE_HTBPLL_FBSLIP 0x0200000000000000ULL
274#define INFINIPATH_HWE_HTBPLL_RFSLIP 0x0400000000000000ULL
275#define INFINIPATH_HWE_HTAPLL_FBSLIP 0x0800000000000000ULL
276#define INFINIPATH_HWE_HTAPLL_RFSLIP 0x1000000000000000ULL
277#define INFINIPATH_HWE_SERDESPLLFAILED 0x2000000000000000ULL
278
279/* kr_extstatus bits */
280#define INFINIPATH_EXTS_FREQSEL 0x2
281#define INFINIPATH_EXTS_SERDESSEL 0x4
282#define INFINIPATH_EXTS_MEMBIST_ENDTEST 0x0000000000004000
283#define INFINIPATH_EXTS_MEMBIST_CORRECT 0x0000000000008000
284
285/*
286 * masks and bits that are different in different chips, or present only
287 * in one
288 */
289static const ipath_err_t infinipath_hwe_htcmemparityerr_mask =
290 INFINIPATH_HWE_HTCMEMPARITYERR_MASK;
291static const ipath_err_t infinipath_hwe_htcmemparityerr_shift =
292 INFINIPATH_HWE_HTCMEMPARITYERR_SHIFT;
293
294static const ipath_err_t infinipath_hwe_htclnkabyte0crcerr =
295 INFINIPATH_HWE_HTCLNKABYTE0CRCERR;
296static const ipath_err_t infinipath_hwe_htclnkabyte1crcerr =
297 INFINIPATH_HWE_HTCLNKABYTE1CRCERR;
298static const ipath_err_t infinipath_hwe_htclnkbbyte0crcerr =
299 INFINIPATH_HWE_HTCLNKBBYTE0CRCERR;
300static const ipath_err_t infinipath_hwe_htclnkbbyte1crcerr =
301 INFINIPATH_HWE_HTCLNKBBYTE1CRCERR;
302
303#define _IPATH_GPIO_SDA_NUM 1
304#define _IPATH_GPIO_SCL_NUM 0
305
306#define IPATH_GPIO_SDA \
307 (1ULL << (_IPATH_GPIO_SDA_NUM+INFINIPATH_EXTC_GPIOOE_SHIFT))
308#define IPATH_GPIO_SCL \
309 (1ULL << (_IPATH_GPIO_SCL_NUM+INFINIPATH_EXTC_GPIOOE_SHIFT))
310
311/* keep the code below somewhat more readonable; not used elsewhere */
312#define _IPATH_HTLINK0_CRCBITS (infinipath_hwe_htclnkabyte0crcerr | \
313 infinipath_hwe_htclnkabyte1crcerr)
314#define _IPATH_HTLINK1_CRCBITS (infinipath_hwe_htclnkbbyte0crcerr | \
315 infinipath_hwe_htclnkbbyte1crcerr)
316#define _IPATH_HTLANE0_CRCBITS (infinipath_hwe_htclnkabyte0crcerr | \
317 infinipath_hwe_htclnkbbyte0crcerr)
318#define _IPATH_HTLANE1_CRCBITS (infinipath_hwe_htclnkabyte1crcerr | \
319 infinipath_hwe_htclnkbbyte1crcerr)
320
321static void hwerr_crcbits(struct ipath_devdata *dd, ipath_err_t hwerrs,
322 char *msg, size_t msgl)
323{
324 char bitsmsg[64];
325 ipath_err_t crcbits = hwerrs &
326 (_IPATH_HTLINK0_CRCBITS | _IPATH_HTLINK1_CRCBITS);
327 /* don't check if 8bit HT */
328 if (dd->ipath_flags & IPATH_8BIT_IN_HT0)
329 crcbits &= ~infinipath_hwe_htclnkabyte1crcerr;
330 /* don't check if 8bit HT */
331 if (dd->ipath_flags & IPATH_8BIT_IN_HT1)
332 crcbits &= ~infinipath_hwe_htclnkbbyte1crcerr;
333 /*
334 * we'll want to ignore link errors on link that is
335 * not in use, if any. For now, complain about both
336 */
337 if (crcbits) {
338 u16 ctrl0, ctrl1;
339 snprintf(bitsmsg, sizeof bitsmsg,
340 "[HT%s lane %s CRC (%llx); ignore till reload]",
341 !(crcbits & _IPATH_HTLINK1_CRCBITS) ?
342 "0 (A)" : (!(crcbits & _IPATH_HTLINK0_CRCBITS)
343 ? "1 (B)" : "0+1 (A+B)"),
344 !(crcbits & _IPATH_HTLANE1_CRCBITS) ? "0"
345 : (!(crcbits & _IPATH_HTLANE0_CRCBITS) ? "1" :
346 "0+1"), (unsigned long long) crcbits);
347 strlcat(msg, bitsmsg, msgl);
348
349 /*
350 * print extra info for debugging. slave/primary
351 * config word 4, 8 (link control 0, 1)
352 */
353
354 if (pci_read_config_word(dd->pcidev,
355 dd->ipath_ht_slave_off + 0x4,
356 &ctrl0))
357 dev_info(&dd->pcidev->dev, "Couldn't read "
358 "linkctrl0 of slave/primary "
359 "config block\n");
360 else if (!(ctrl0 & 1 << 6))
361 /* not if EOC bit set */
362 ipath_dbg("HT linkctrl0 0x%x%s%s\n", ctrl0,
363 ((ctrl0 >> 8) & 7) ? " CRC" : "",
364 ((ctrl0 >> 4) & 1) ? "linkfail" :
365 "");
366 if (pci_read_config_word(dd->pcidev,
367 dd->ipath_ht_slave_off + 0x8,
368 &ctrl1))
369 dev_info(&dd->pcidev->dev, "Couldn't read "
370 "linkctrl1 of slave/primary "
371 "config block\n");
372 else if (!(ctrl1 & 1 << 6))
373 /* not if EOC bit set */
374 ipath_dbg("HT linkctrl1 0x%x%s%s\n", ctrl1,
375 ((ctrl1 >> 8) & 7) ? " CRC" : "",
376 ((ctrl1 >> 4) & 1) ? "linkfail" :
377 "");
378
379 /* disable until driver reloaded */
380 dd->ipath_hwerrmask &= ~crcbits;
381 ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrmask,
382 dd->ipath_hwerrmask);
383 ipath_dbg("HT crc errs: %s\n", msg);
384 } else
385 ipath_dbg("ignoring HT crc errors 0x%llx, "
386 "not in use\n", (unsigned long long)
387 (hwerrs & (_IPATH_HTLINK0_CRCBITS |
388 _IPATH_HTLINK1_CRCBITS)));
389}
390
391/**
392 * ipath_ht_handle_hwerrors - display hardware errors
393 * @dd: the infinipath device
394 * @msg: the output buffer
395 * @msgl: the size of the output buffer
396 *
397 * Use same msg buffer as regular errors to avoid
398 * excessive stack use. Most hardware errors are catastrophic, but for
399 * right now, we'll print them and continue.
400 * We reuse the same message buffer as ipath_handle_errors() to avoid
401 * excessive stack usage.
402 */
403static void ipath_ht_handle_hwerrors(struct ipath_devdata *dd, char *msg,
404 size_t msgl)
405{
406 ipath_err_t hwerrs;
407 u32 bits, ctrl;
408 int isfatal = 0;
409 char bitsmsg[64];
410
411 hwerrs = ipath_read_kreg64(dd, dd->ipath_kregs->kr_hwerrstatus);
412
413 if (!hwerrs) {
414 ipath_cdbg(VERBOSE, "Called but no hardware errors set\n");
415 /*
416 * better than printing cofusing messages
417 * This seems to be related to clearing the crc error, or
418 * the pll error during init.
419 */
420 goto bail;
421 } else if (hwerrs == -1LL) {
422 ipath_dev_err(dd, "Read of hardware error status failed "
423 "(all bits set); ignoring\n");
424 goto bail;
425 }
426 ipath_stats.sps_hwerrs++;
427
428 /* Always clear the error status register, except MEMBISTFAIL,
429 * regardless of whether we continue or stop using the chip.
430 * We want that set so we know it failed, even across driver reload.
431 * We'll still ignore it in the hwerrmask. We do this partly for
432 * diagnostics, but also for support */
433 ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrclear,
434 hwerrs&~INFINIPATH_HWE_MEMBISTFAILED);
435
436 hwerrs &= dd->ipath_hwerrmask;
437
438 /*
439 * make sure we get this much out, unless told to be quiet,
440 * or it's occurred within the last 5 seconds
441 */
442 if ((hwerrs & ~dd->ipath_lasthwerror) ||
443 (ipath_debug & __IPATH_VERBDBG))
444 dev_info(&dd->pcidev->dev, "Hardware error: hwerr=0x%llx "
445 "(cleared)\n", (unsigned long long) hwerrs);
446 dd->ipath_lasthwerror |= hwerrs;
447
448 if (hwerrs & ~infinipath_hwe_bitsextant)
449 ipath_dev_err(dd, "hwerror interrupt with unknown errors "
450 "%llx set\n", (unsigned long long)
451 (hwerrs & ~infinipath_hwe_bitsextant));
452
453 ctrl = ipath_read_kreg32(dd, dd->ipath_kregs->kr_control);
454 if (ctrl & INFINIPATH_C_FREEZEMODE) {
455 if (hwerrs) {
456 /*
457 * if any set that we aren't ignoring; only
458 * make the complaint once, in case it's stuck
459 * or recurring, and we get here multiple
460 * times.
461 */
462 if (dd->ipath_flags & IPATH_INITTED) {
463 ipath_dev_err(dd, "Fatal Error (freeze "
464 "mode), no longer usable\n");
465 isfatal = 1;
466 }
467 *dd->ipath_statusp &= ~IPATH_STATUS_IB_READY;
468 /* mark as having had error */
469 *dd->ipath_statusp |= IPATH_STATUS_HWERROR;
470 /*
471 * mark as not usable, at a minimum until driver
472 * is reloaded, probably until reboot, since no
473 * other reset is possible.
474 */
475 dd->ipath_flags &= ~IPATH_INITTED;
476 } else {
477 ipath_dbg("Clearing freezemode on ignored hardware "
478 "error\n");
479 ctrl &= ~INFINIPATH_C_FREEZEMODE;
480 ipath_write_kreg(dd, dd->ipath_kregs->kr_control,
481 ctrl);
482 }
483 }
484
485 *msg = '\0';
486
487 /*
488 * may someday want to decode into which bits are which
489 * functional area for parity errors, etc.
490 */
491 if (hwerrs & (infinipath_hwe_htcmemparityerr_mask
492 << INFINIPATH_HWE_HTCMEMPARITYERR_SHIFT)) {
493 bits = (u32) ((hwerrs >>
494 INFINIPATH_HWE_HTCMEMPARITYERR_SHIFT) &
495 INFINIPATH_HWE_HTCMEMPARITYERR_MASK);
496 snprintf(bitsmsg, sizeof bitsmsg, "[HTC Parity Errs %x] ",
497 bits);
498 strlcat(msg, bitsmsg, msgl);
499 }
500 if (hwerrs & (INFINIPATH_HWE_RXEMEMPARITYERR_MASK
501 << INFINIPATH_HWE_RXEMEMPARITYERR_SHIFT)) {
502 bits = (u32) ((hwerrs >>
503 INFINIPATH_HWE_RXEMEMPARITYERR_SHIFT) &
504 INFINIPATH_HWE_RXEMEMPARITYERR_MASK);
505 snprintf(bitsmsg, sizeof bitsmsg, "[RXE Parity Errs %x] ",
506 bits);
507 strlcat(msg, bitsmsg, msgl);
508 }
509 if (hwerrs & (INFINIPATH_HWE_TXEMEMPARITYERR_MASK
510 << INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT)) {
511 bits = (u32) ((hwerrs >>
512 INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT) &
513 INFINIPATH_HWE_TXEMEMPARITYERR_MASK);
514 snprintf(bitsmsg, sizeof bitsmsg, "[TXE Parity Errs %x] ",
515 bits);
516 strlcat(msg, bitsmsg, msgl);
517 }
518 if (hwerrs & INFINIPATH_HWE_IBCBUSTOSPCPARITYERR)
519 strlcat(msg, "[IB2IPATH Parity]", msgl);
520 if (hwerrs & INFINIPATH_HWE_IBCBUSFRSPCPARITYERR)
521 strlcat(msg, "[IPATH2IB Parity]", msgl);
522 if (hwerrs & INFINIPATH_HWE_HTCBUSIREQPARITYERR)
523 strlcat(msg, "[HTC Ireq Parity]", msgl);
524 if (hwerrs & INFINIPATH_HWE_HTCBUSTREQPARITYERR)
525 strlcat(msg, "[HTC Treq Parity]", msgl);
526 if (hwerrs & INFINIPATH_HWE_HTCBUSTRESPPARITYERR)
527 strlcat(msg, "[HTC Tresp Parity]", msgl);
528
529 if (hwerrs & (_IPATH_HTLINK0_CRCBITS | _IPATH_HTLINK1_CRCBITS))
530 hwerr_crcbits(dd, hwerrs, msg, msgl);
531
532 if (hwerrs & INFINIPATH_HWE_HTCMISCERR5)
533 strlcat(msg, "[HT core Misc5]", msgl);
534 if (hwerrs & INFINIPATH_HWE_HTCMISCERR6)
535 strlcat(msg, "[HT core Misc6]", msgl);
536 if (hwerrs & INFINIPATH_HWE_HTCMISCERR7)
537 strlcat(msg, "[HT core Misc7]", msgl);
538 if (hwerrs & INFINIPATH_HWE_MEMBISTFAILED) {
539 strlcat(msg, "[Memory BIST test failed, HT-400 unusable]",
540 msgl);
541 /* ignore from now on, so disable until driver reloaded */
542 dd->ipath_hwerrmask &= ~INFINIPATH_HWE_MEMBISTFAILED;
543 ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrmask,
544 dd->ipath_hwerrmask);
545 }
546#define _IPATH_PLL_FAIL (INFINIPATH_HWE_COREPLL_FBSLIP | \
547 INFINIPATH_HWE_COREPLL_RFSLIP | \
548 INFINIPATH_HWE_HTBPLL_FBSLIP | \
549 INFINIPATH_HWE_HTBPLL_RFSLIP | \
550 INFINIPATH_HWE_HTAPLL_FBSLIP | \
551 INFINIPATH_HWE_HTAPLL_RFSLIP)
552
553 if (hwerrs & _IPATH_PLL_FAIL) {
554 snprintf(bitsmsg, sizeof bitsmsg,
555 "[PLL failed (%llx), HT-400 unusable]",
556 (unsigned long long) (hwerrs & _IPATH_PLL_FAIL));
557 strlcat(msg, bitsmsg, msgl);
558 /* ignore from now on, so disable until driver reloaded */
559 dd->ipath_hwerrmask &= ~(hwerrs & _IPATH_PLL_FAIL);
560 ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrmask,
561 dd->ipath_hwerrmask);
562 }
563
564 if (hwerrs & INFINIPATH_HWE_SERDESPLLFAILED) {
565 /*
566 * If it occurs, it is left masked since the eternal
567 * interface is unused
568 */
569 dd->ipath_hwerrmask &= ~INFINIPATH_HWE_SERDESPLLFAILED;
570 ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrmask,
571 dd->ipath_hwerrmask);
572 }
573
574 if (hwerrs & INFINIPATH_HWE_RXDSYNCMEMPARITYERR)
575 strlcat(msg, "[Rx Dsync]", msgl);
576 if (hwerrs & INFINIPATH_HWE_SERDESPLLFAILED)
577 strlcat(msg, "[SerDes PLL]", msgl);
578
579 ipath_dev_err(dd, "%s hardware error\n", msg);
580 if (isfatal && !ipath_diag_inuse && dd->ipath_freezemsg)
581 /*
582 * for status file; if no trailing brace is copied,
583 * we'll know it was truncated.
584 */
585 snprintf(dd->ipath_freezemsg,
586 dd->ipath_freezelen, "{%s}", msg);
587
588bail:;
589}
590
591/**
592 * ipath_ht_boardname - fill in the board name
593 * @dd: the infinipath device
594 * @name: the output buffer
595 * @namelen: the size of the output buffer
596 *
597 * fill in the board name, based on the board revision register
598 */
599static int ipath_ht_boardname(struct ipath_devdata *dd, char *name,
600 size_t namelen)
601{
602 char *n = NULL;
603 u8 boardrev = dd->ipath_boardrev;
604 int ret;
605
606 switch (boardrev) {
607 case 4: /* Ponderosa is one of the bringup boards */
608 n = "Ponderosa";
609 break;
610 case 5: /* HT-460 original production board */
611 n = "InfiniPath_HT-460";
612 break;
613 case 6:
614 n = "OEM_Board_3";
615 break;
616 case 7:
617 /* HT-460 small form factor production board */
618 n = "InfiniPath_HT-465";
619 break;
620 case 8:
621 n = "LS/X-1";
622 break;
623 case 9: /* Comstock bringup test board */
624 n = "Comstock";
625 break;
626 case 10:
627 n = "OEM_Board_2";
628 break;
629 case 11:
630 n = "InfiniPath_HT-470";
631 break;
632 case 12:
633 n = "OEM_Board_4";
634 break;
635 default: /* don't know, just print the number */
636 ipath_dev_err(dd, "Don't yet know about board "
637 "with ID %u\n", boardrev);
638 snprintf(name, namelen, "Unknown_InfiniPath_HT-4xx_%u",
639 boardrev);
640 break;
641 }
642 if (n)
643 snprintf(name, namelen, "%s", n);
644
645 if (dd->ipath_majrev != 3 || dd->ipath_minrev != 2) {
646 /*
647 * This version of the driver only supports the HT-400
648 * Rev 3.2
649 */
650 ipath_dev_err(dd,
651 "Unsupported HT-400 revision %u.%u!\n",
652 dd->ipath_majrev, dd->ipath_minrev);
653 ret = 1;
654 goto bail;
655 }
656 /*
657 * pkt/word counters are 32 bit, and therefore wrap fast enough
658 * that we snapshot them from a timer, and maintain 64 bit shadow
659 * copies
660 */
661 dd->ipath_flags |= IPATH_32BITCOUNTERS;
662 if (dd->ipath_htspeed != 800)
663 ipath_dev_err(dd,
664 "Incorrectly configured for HT @ %uMHz\n",
665 dd->ipath_htspeed);
666 if (dd->ipath_boardrev == 7 || dd->ipath_boardrev == 11 ||
667 dd->ipath_boardrev == 6)
668 dd->ipath_flags |= IPATH_GPIO_INTR;
669 else
670 dd->ipath_flags |= IPATH_POLL_RX_INTR;
671 if (dd->ipath_boardrev == 8) { /* LS/X-1 */
672 u64 val;
673 val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_extstatus);
674 if (val & INFINIPATH_EXTS_SERDESSEL) {
675 /*
676 * hardware disabled
677 *
678 * This means that the chip is hardware disabled,
679 * and will not be able to bring up the link,
680 * in any case. We special case this and abort
681 * early, to avoid later messages. We also set
682 * the DISABLED status bit
683 */
684 ipath_dbg("Unit %u is hardware-disabled\n",
685 dd->ipath_unit);
686 *dd->ipath_statusp |= IPATH_STATUS_DISABLED;
687 /* this value is handled differently */
688 ret = 2;
689 goto bail;
690 }
691 }
692 ret = 0;
693
694bail:
695 return ret;
696}
697
698static void ipath_check_htlink(struct ipath_devdata *dd)
699{
700 u8 linkerr, link_off, i;
701
702 for (i = 0; i < 2; i++) {
703 link_off = dd->ipath_ht_slave_off + i * 4 + 0xd;
704 if (pci_read_config_byte(dd->pcidev, link_off, &linkerr))
705 dev_info(&dd->pcidev->dev, "Couldn't read "
706 "linkerror%d of HT slave/primary block\n",
707 i);
708 else if (linkerr & 0xf0) {
709 ipath_cdbg(VERBOSE, "HT linkerr%d bits 0x%x set, "
710 "clearing\n", linkerr >> 4, i);
711 /*
712 * writing the linkerr bits that are set should
713 * clear them
714 */
715 if (pci_write_config_byte(dd->pcidev, link_off,
716 linkerr))
717 ipath_dbg("Failed write to clear HT "
718 "linkerror%d\n", i);
719 if (pci_read_config_byte(dd->pcidev, link_off,
720 &linkerr))
721 dev_info(&dd->pcidev->dev,
722 "Couldn't reread linkerror%d of "
723 "HT slave/primary block\n", i);
724 else if (linkerr & 0xf0)
725 dev_info(&dd->pcidev->dev,
726 "HT linkerror%d bits 0x%x "
727 "couldn't be cleared\n",
728 i, linkerr >> 4);
729 }
730 }
731}
732
733static int ipath_setup_ht_reset(struct ipath_devdata *dd)
734{
735 ipath_dbg("No reset possible for HT-400\n");
736 return 0;
737}
738
739#define HT_CAPABILITY_ID 0x08 /* HT capabilities not defined in kernel */
740#define HT_INTR_DISC_CONFIG 0x80 /* HT interrupt and discovery cap */
741#define HT_INTR_REG_INDEX 2 /* intconfig requires indirect accesses */
742
743/*
744 * Bits 13-15 of command==0 is slave/primary block. Clear any HT CRC
745 * errors. We only bother to do this at load time, because it's OK if
746 * it happened before we were loaded (first time after boot/reset),
747 * but any time after that, it's fatal anyway. Also need to not check
748 * for for upper byte errors if we are in 8 bit mode, so figure out
749 * our width. For now, at least, also complain if it's 8 bit.
750 */
751static void slave_or_pri_blk(struct ipath_devdata *dd, struct pci_dev *pdev,
752 int pos, u8 cap_type)
753{
754 u8 linkwidth = 0, linkerr, link_a_b_off, link_off;
755 u16 linkctrl = 0;
756 int i;
757
758 dd->ipath_ht_slave_off = pos;
759 /* command word, master_host bit */
760 /* master host || slave */
761 if ((cap_type >> 2) & 1)
762 link_a_b_off = 4;
763 else
764 link_a_b_off = 0;
765 ipath_cdbg(VERBOSE, "HT%u (Link %c) connected to processor\n",
766 link_a_b_off ? 1 : 0,
767 link_a_b_off ? 'B' : 'A');
768
769 link_a_b_off += pos;
770
771 /*
772 * check both link control registers; clear both HT CRC sets if
773 * necessary.
774 */
775 for (i = 0; i < 2; i++) {
776 link_off = pos + i * 4 + 0x4;
777 if (pci_read_config_word(pdev, link_off, &linkctrl))
778 ipath_dev_err(dd, "Couldn't read HT link control%d "
779 "register\n", i);
780 else if (linkctrl & (0xf << 8)) {
781 ipath_cdbg(VERBOSE, "Clear linkctrl%d CRC Error "
782 "bits %x\n", i, linkctrl & (0xf << 8));
783 /*
784 * now write them back to clear the error.
785 */
786 pci_write_config_byte(pdev, link_off,
787 linkctrl & (0xf << 8));
788 }
789 }
790
791 /*
792 * As with HT CRC bits, same for protocol errors that might occur
793 * during boot.
794 */
795 for (i = 0; i < 2; i++) {
796 link_off = pos + i * 4 + 0xd;
797 if (pci_read_config_byte(pdev, link_off, &linkerr))
798 dev_info(&pdev->dev, "Couldn't read linkerror%d "
799 "of HT slave/primary block\n", i);
800 else if (linkerr & 0xf0) {
801 ipath_cdbg(VERBOSE, "HT linkerr%d bits 0x%x set, "
802 "clearing\n", linkerr >> 4, i);
803 /*
804 * writing the linkerr bits that are set will clear
805 * them
806 */
807 if (pci_write_config_byte
808 (pdev, link_off, linkerr))
809 ipath_dbg("Failed write to clear HT "
810 "linkerror%d\n", i);
811 if (pci_read_config_byte(pdev, link_off, &linkerr))
812 dev_info(&pdev->dev, "Couldn't reread "
813 "linkerror%d of HT slave/primary "
814 "block\n", i);
815 else if (linkerr & 0xf0)
816 dev_info(&pdev->dev, "HT linkerror%d bits "
817 "0x%x couldn't be cleared\n",
818 i, linkerr >> 4);
819 }
820 }
821
822 /*
823 * this is just for our link to the host, not devices connected
824 * through tunnel.
825 */
826
827 if (pci_read_config_byte(pdev, link_a_b_off + 7, &linkwidth))
828 ipath_dev_err(dd, "Couldn't read HT link width "
829 "config register\n");
830 else {
831 u32 width;
832 switch (linkwidth & 7) {
833 case 5:
834 width = 4;
835 break;
836 case 4:
837 width = 2;
838 break;
839 case 3:
840 width = 32;
841 break;
842 case 1:
843 width = 16;
844 break;
845 case 0:
846 default: /* if wrong, assume 8 bit */
847 width = 8;
848 break;
849 }
850
851 dd->ipath_htwidth = width;
852
853 if (linkwidth != 0x11) {
854 ipath_dev_err(dd, "Not configured for 16 bit HT "
855 "(%x)\n", linkwidth);
856 if (!(linkwidth & 0xf)) {
857 ipath_dbg("Will ignore HT lane1 errors\n");
858 dd->ipath_flags |= IPATH_8BIT_IN_HT0;
859 }
860 }
861 }
862
863 /*
864 * this is just for our link to the host, not devices connected
865 * through tunnel.
866 */
867 if (pci_read_config_byte(pdev, link_a_b_off + 0xd, &linkwidth))
868 ipath_dev_err(dd, "Couldn't read HT link frequency "
869 "config register\n");
870 else {
871 u32 speed;
872 switch (linkwidth & 0xf) {
873 case 6:
874 speed = 1000;
875 break;
876 case 5:
877 speed = 800;
878 break;
879 case 4:
880 speed = 600;
881 break;
882 case 3:
883 speed = 500;
884 break;
885 case 2:
886 speed = 400;
887 break;
888 case 1:
889 speed = 300;
890 break;
891 default:
892 /*
893 * assume reserved and vendor-specific are 200...
894 */
895 case 0:
896 speed = 200;
897 break;
898 }
899 dd->ipath_htspeed = speed;
900 }
901}
902
903static int set_int_handler(struct ipath_devdata *dd, struct pci_dev *pdev,
904 int pos)
905{
906 u32 int_handler_addr_lower;
907 u32 int_handler_addr_upper;
908 u64 ihandler;
909 u32 intvec;
910
911 /* use indirection register to get the intr handler */
912 pci_write_config_byte(pdev, pos + HT_INTR_REG_INDEX, 0x10);
913 pci_read_config_dword(pdev, pos + 4, &int_handler_addr_lower);
914 pci_write_config_byte(pdev, pos + HT_INTR_REG_INDEX, 0x11);
915 pci_read_config_dword(pdev, pos + 4, &int_handler_addr_upper);
916
917 ihandler = (u64) int_handler_addr_lower |
918 ((u64) int_handler_addr_upper << 32);
919
920 /*
921 * kernels with CONFIG_PCI_MSI set the vector in the irq field of
922 * struct pci_device, so we use that to program the HT-400 internal
923 * interrupt register (not config space) with that value. The BIOS
924 * must still have done the basic MSI setup.
925 */
926 intvec = pdev->irq;
927 /*
928 * clear any vector bits there; normally not set but we'll overload
929 * this for some debug purposes (setting the HTC debug register
930 * value from software, rather than GPIOs), so it might be set on a
931 * driver reload.
932 */
933 ihandler &= ~0xff0000;
934 /* x86 vector goes in intrinfo[23:16] */
935 ihandler |= intvec << 16;
936 ipath_cdbg(VERBOSE, "ihandler lower %x, upper %x, intvec %x, "
937 "interruptconfig %llx\n", int_handler_addr_lower,
938 int_handler_addr_upper, intvec,
939 (unsigned long long) ihandler);
940
941 /* can't program yet, so save for interrupt setup */
942 dd->ipath_intconfig = ihandler;
943 /* keep going, so we find link control stuff also */
944
945 return ihandler != 0;
946}
947
948/**
949 * ipath_setup_ht_config - setup the interruptconfig register
950 * @dd: the infinipath device
951 * @pdev: the PCI device
952 *
953 * setup the interruptconfig register from the HT config info.
954 * Also clear CRC errors in HT linkcontrol, if necessary.
955 * This is done only for the real hardware. It is done before
956 * chip address space is initted, so can't touch infinipath registers
957 */
958static int ipath_setup_ht_config(struct ipath_devdata *dd,
959 struct pci_dev *pdev)
960{
961 int pos, ret = 0;
962 int ihandler = 0;
963
964 /*
965 * Read the capability info to find the interrupt info, and also
966 * handle clearing CRC errors in linkctrl register if necessary. We
967 * do this early, before we ever enable errors or hardware errors,
968 * mostly to avoid causing the chip to enter freeze mode.
969 */
970 pos = pci_find_capability(pdev, HT_CAPABILITY_ID);
971 if (!pos) {
972 ipath_dev_err(dd, "Couldn't find HyperTransport "
973 "capability; no interrupts\n");
974 ret = -ENODEV;
975 goto bail;
976 }
977 do {
978 u8 cap_type;
979
980 /* the HT capability type byte is 3 bytes after the
981 * capability byte.
982 */
983 if (pci_read_config_byte(pdev, pos + 3, &cap_type)) {
984 dev_info(&pdev->dev, "Couldn't read config "
985 "command @ %d\n", pos);
986 continue;
987 }
988 if (!(cap_type & 0xE0))
989 slave_or_pri_blk(dd, pdev, pos, cap_type);
990 else if (cap_type == HT_INTR_DISC_CONFIG)
991 ihandler = set_int_handler(dd, pdev, pos);
992 } while ((pos = pci_find_next_capability(pdev, pos,
993 HT_CAPABILITY_ID)));
994
995 if (!ihandler) {
996 ipath_dev_err(dd, "Couldn't find interrupt handler in "
997 "config space\n");
998 ret = -ENODEV;
999 }
1000
1001bail:
1002 return ret;
1003}
1004
1005/**
1006 * ipath_setup_ht_cleanup - clean up any per-chip chip-specific stuff
1007 * @dd: the infinipath device
1008 *
1009 * Called during driver unload.
1010 * This is currently a nop for the HT-400, not for all chips
1011 */
1012static void ipath_setup_ht_cleanup(struct ipath_devdata *dd)
1013{
1014}
1015
1016/**
1017 * ipath_setup_ht_setextled - set the state of the two external LEDs
1018 * @dd: the infinipath device
1019 * @lst: the L state
1020 * @ltst: the LT state
1021 *
1022 * Set the state of the two external LEDs, to indicate physical and
1023 * logical state of IB link. For this chip (at least with recommended
1024 * board pinouts), LED1 is Green (physical state), and LED2 is Yellow
1025 * (logical state)
1026 *
1027 * Note: We try to match the Mellanox HCA LED behavior as best
1028 * we can. Green indicates physical link state is OK (something is
1029 * plugged in, and we can train).
1030 * Amber indicates the link is logically up (ACTIVE).
1031 * Mellanox further blinks the amber LED to indicate data packet
1032 * activity, but we have no hardware support for that, so it would
1033 * require waking up every 10-20 msecs and checking the counters
1034 * on the chip, and then turning the LED off if appropriate. That's
1035 * visible overhead, so not something we will do.
1036 *
1037 */
1038static void ipath_setup_ht_setextled(struct ipath_devdata *dd,
1039 u64 lst, u64 ltst)
1040{
1041 u64 extctl;
1042
1043 /* the diags use the LED to indicate diag info, so we leave
1044 * the external LED alone when the diags are running */
1045 if (ipath_diag_inuse)
1046 return;
1047
1048 /*
1049 * start by setting both LED control bits to off, then turn
1050 * on the appropriate bit(s).
1051 */
1052 if (dd->ipath_boardrev == 8) { /* LS/X-1 uses different pins */
1053 /*
1054 * major difference is that INFINIPATH_EXTC_LEDGBLERR_OFF
1055 * is inverted, because it is normally used to indicate
1056 * a hardware fault at reset, if there were errors
1057 */
1058 extctl = (dd->ipath_extctrl & ~INFINIPATH_EXTC_LEDGBLOK_ON)
1059 | INFINIPATH_EXTC_LEDGBLERR_OFF;
1060 if (ltst == INFINIPATH_IBCS_LT_STATE_LINKUP)
1061 extctl &= ~INFINIPATH_EXTC_LEDGBLERR_OFF;
1062 if (lst == INFINIPATH_IBCS_L_STATE_ACTIVE)
1063 extctl |= INFINIPATH_EXTC_LEDGBLOK_ON;
1064 }
1065 else {
1066 extctl = dd->ipath_extctrl &
1067 ~(INFINIPATH_EXTC_LED1PRIPORT_ON |
1068 INFINIPATH_EXTC_LED2PRIPORT_ON);
1069 if (ltst == INFINIPATH_IBCS_LT_STATE_LINKUP)
1070 extctl |= INFINIPATH_EXTC_LED1PRIPORT_ON;
1071 if (lst == INFINIPATH_IBCS_L_STATE_ACTIVE)
1072 extctl |= INFINIPATH_EXTC_LED2PRIPORT_ON;
1073 }
1074 dd->ipath_extctrl = extctl;
1075 ipath_write_kreg(dd, dd->ipath_kregs->kr_extctrl, extctl);
1076}
1077
1078static void ipath_init_ht_variables(void)
1079{
1080 ipath_gpio_sda_num = _IPATH_GPIO_SDA_NUM;
1081 ipath_gpio_scl_num = _IPATH_GPIO_SCL_NUM;
1082 ipath_gpio_sda = IPATH_GPIO_SDA;
1083 ipath_gpio_scl = IPATH_GPIO_SCL;
1084
1085 infinipath_i_bitsextant =
1086 (INFINIPATH_I_RCVURG_MASK << INFINIPATH_I_RCVURG_SHIFT) |
1087 (INFINIPATH_I_RCVAVAIL_MASK <<
1088 INFINIPATH_I_RCVAVAIL_SHIFT) |
1089 INFINIPATH_I_ERROR | INFINIPATH_I_SPIOSENT |
1090 INFINIPATH_I_SPIOBUFAVAIL | INFINIPATH_I_GPIO;
1091
1092 infinipath_e_bitsextant =
1093 INFINIPATH_E_RFORMATERR | INFINIPATH_E_RVCRC |
1094 INFINIPATH_E_RICRC | INFINIPATH_E_RMINPKTLEN |
1095 INFINIPATH_E_RMAXPKTLEN | INFINIPATH_E_RLONGPKTLEN |
1096 INFINIPATH_E_RSHORTPKTLEN | INFINIPATH_E_RUNEXPCHAR |
1097 INFINIPATH_E_RUNSUPVL | INFINIPATH_E_REBP |
1098 INFINIPATH_E_RIBFLOW | INFINIPATH_E_RBADVERSION |
1099 INFINIPATH_E_RRCVEGRFULL | INFINIPATH_E_RRCVHDRFULL |
1100 INFINIPATH_E_RBADTID | INFINIPATH_E_RHDRLEN |
1101 INFINIPATH_E_RHDR | INFINIPATH_E_RIBLOSTLINK |
1102 INFINIPATH_E_SMINPKTLEN | INFINIPATH_E_SMAXPKTLEN |
1103 INFINIPATH_E_SUNDERRUN | INFINIPATH_E_SPKTLEN |
1104 INFINIPATH_E_SDROPPEDSMPPKT | INFINIPATH_E_SDROPPEDDATAPKT |
1105 INFINIPATH_E_SPIOARMLAUNCH | INFINIPATH_E_SUNEXPERRPKTNUM |
1106 INFINIPATH_E_SUNSUPVL | INFINIPATH_E_IBSTATUSCHANGED |
1107 INFINIPATH_E_INVALIDADDR | INFINIPATH_E_RESET |
1108 INFINIPATH_E_HARDWARE;
1109
1110 infinipath_hwe_bitsextant =
1111 (INFINIPATH_HWE_HTCMEMPARITYERR_MASK <<
1112 INFINIPATH_HWE_HTCMEMPARITYERR_SHIFT) |
1113 (INFINIPATH_HWE_TXEMEMPARITYERR_MASK <<
1114 INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT) |
1115 (INFINIPATH_HWE_RXEMEMPARITYERR_MASK <<
1116 INFINIPATH_HWE_RXEMEMPARITYERR_SHIFT) |
1117 INFINIPATH_HWE_HTCLNKABYTE0CRCERR |
1118 INFINIPATH_HWE_HTCLNKABYTE1CRCERR |
1119 INFINIPATH_HWE_HTCLNKBBYTE0CRCERR |
1120 INFINIPATH_HWE_HTCLNKBBYTE1CRCERR |
1121 INFINIPATH_HWE_HTCMISCERR4 |
1122 INFINIPATH_HWE_HTCMISCERR5 | INFINIPATH_HWE_HTCMISCERR6 |
1123 INFINIPATH_HWE_HTCMISCERR7 |
1124 INFINIPATH_HWE_HTCBUSTREQPARITYERR |
1125 INFINIPATH_HWE_HTCBUSTRESPPARITYERR |
1126 INFINIPATH_HWE_HTCBUSIREQPARITYERR |
1127 INFINIPATH_HWE_RXDSYNCMEMPARITYERR |
1128 INFINIPATH_HWE_MEMBISTFAILED |
1129 INFINIPATH_HWE_COREPLL_FBSLIP |
1130 INFINIPATH_HWE_COREPLL_RFSLIP |
1131 INFINIPATH_HWE_HTBPLL_FBSLIP |
1132 INFINIPATH_HWE_HTBPLL_RFSLIP |
1133 INFINIPATH_HWE_HTAPLL_FBSLIP |
1134 INFINIPATH_HWE_HTAPLL_RFSLIP |
1135 INFINIPATH_HWE_SERDESPLLFAILED |
1136 INFINIPATH_HWE_IBCBUSTOSPCPARITYERR |
1137 INFINIPATH_HWE_IBCBUSFRSPCPARITYERR;
1138
1139 infinipath_i_rcvavail_mask = INFINIPATH_I_RCVAVAIL_MASK;
1140 infinipath_i_rcvurg_mask = INFINIPATH_I_RCVURG_MASK;
1141}
1142
1143/**
1144 * ipath_ht_init_hwerrors - enable hardware errors
1145 * @dd: the infinipath device
1146 *
1147 * now that we have finished initializing everything that might reasonably
1148 * cause a hardware error, and cleared those errors bits as they occur,
1149 * we can enable hardware errors in the mask (potentially enabling
1150 * freeze mode), and enable hardware errors as errors (along with
1151 * everything else) in errormask
1152 */
1153static void ipath_ht_init_hwerrors(struct ipath_devdata *dd)
1154{
1155 ipath_err_t val;
1156 u64 extsval;
1157
1158 extsval = ipath_read_kreg64(dd, dd->ipath_kregs->kr_extstatus);
1159
1160 if (!(extsval & INFINIPATH_EXTS_MEMBIST_ENDTEST))
1161 ipath_dev_err(dd, "MemBIST did not complete!\n");
1162
1163 ipath_check_htlink(dd);
1164
1165 /* barring bugs, all hwerrors become interrupts, which can */
1166 val = -1LL;
1167 /* don't look at crc lane1 if 8 bit */
1168 if (dd->ipath_flags & IPATH_8BIT_IN_HT0)
1169 val &= ~infinipath_hwe_htclnkabyte1crcerr;
1170 /* don't look at crc lane1 if 8 bit */
1171 if (dd->ipath_flags & IPATH_8BIT_IN_HT1)
1172 val &= ~infinipath_hwe_htclnkbbyte1crcerr;
1173
1174 /*
1175 * disable RXDSYNCMEMPARITY because external serdes is unused,
1176 * and therefore the logic will never be used or initialized,
1177 * and uninitialized state will normally result in this error
1178 * being asserted. Similarly for the external serdess pll
1179 * lock signal.
1180 */
1181 val &= ~(INFINIPATH_HWE_SERDESPLLFAILED |
1182 INFINIPATH_HWE_RXDSYNCMEMPARITYERR);
1183
1184 /*
1185 * Disable MISCERR4 because of an inversion in the HT core
1186 * logic checking for errors that cause this bit to be set.
1187 * The errata can also cause the protocol error bit to be set
1188 * in the HT config space linkerror register(s).
1189 */
1190 val &= ~INFINIPATH_HWE_HTCMISCERR4;
1191
1192 /*
1193 * PLL ignored because MDIO interface has a logic problem
1194 * for reads, on Comstock and Ponderosa. BRINGUP
1195 */
1196 if (dd->ipath_boardrev == 4 || dd->ipath_boardrev == 9)
1197 val &= ~INFINIPATH_HWE_SERDESPLLFAILED;
1198 dd->ipath_hwerrmask = val;
1199}
1200
1201/**
1202 * ipath_ht_bringup_serdes - bring up the serdes
1203 * @dd: the infinipath device
1204 */
1205static int ipath_ht_bringup_serdes(struct ipath_devdata *dd)
1206{
1207 u64 val, config1;
1208 int ret = 0, change = 0;
1209
1210 ipath_dbg("Trying to bringup serdes\n");
1211
1212 if (ipath_read_kreg64(dd, dd->ipath_kregs->kr_hwerrstatus) &
1213 INFINIPATH_HWE_SERDESPLLFAILED)
1214 {
1215 ipath_dbg("At start, serdes PLL failed bit set in "
1216 "hwerrstatus, clearing and continuing\n");
1217 ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrclear,
1218 INFINIPATH_HWE_SERDESPLLFAILED);
1219 }
1220
1221 val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_serdesconfig0);
1222 config1 = ipath_read_kreg64(dd, dd->ipath_kregs->kr_serdesconfig1);
1223
1224 ipath_cdbg(VERBOSE, "Initial serdes status is config0=%llx "
1225 "config1=%llx, sstatus=%llx xgxs %llx\n",
1226 (unsigned long long) val, (unsigned long long) config1,
1227 (unsigned long long)
1228 ipath_read_kreg64(dd, dd->ipath_kregs->kr_serdesstatus),
1229 (unsigned long long)
1230 ipath_read_kreg64(dd, dd->ipath_kregs->kr_xgxsconfig));
1231
1232 /* force reset on */
1233 val |= INFINIPATH_SERDC0_RESET_PLL
1234 /* | INFINIPATH_SERDC0_RESET_MASK */
1235 ;
1236 ipath_write_kreg(dd, dd->ipath_kregs->kr_serdesconfig0, val);
1237 udelay(15); /* need pll reset set at least for a bit */
1238
1239 if (val & INFINIPATH_SERDC0_RESET_PLL) {
1240 u64 val2 = val &= ~INFINIPATH_SERDC0_RESET_PLL;
1241 /* set lane resets, and tx idle, during pll reset */
1242 val2 |= INFINIPATH_SERDC0_RESET_MASK |
1243 INFINIPATH_SERDC0_TXIDLE;
1244 ipath_cdbg(VERBOSE, "Clearing serdes PLL reset (writing "
1245 "%llx)\n", (unsigned long long) val2);
1246 ipath_write_kreg(dd, dd->ipath_kregs->kr_serdesconfig0,
1247 val2);
1248 /*
1249 * be sure chip saw it
1250 */
1251 val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
1252 /*
1253 * need pll reset clear at least 11 usec before lane
1254 * resets cleared; give it a few more
1255 */
1256 udelay(15);
1257 val = val2; /* for check below */
1258 }
1259
1260 if (val & (INFINIPATH_SERDC0_RESET_PLL |
1261 INFINIPATH_SERDC0_RESET_MASK |
1262 INFINIPATH_SERDC0_TXIDLE)) {
1263 val &= ~(INFINIPATH_SERDC0_RESET_PLL |
1264 INFINIPATH_SERDC0_RESET_MASK |
1265 INFINIPATH_SERDC0_TXIDLE);
1266 /* clear them */
1267 ipath_write_kreg(dd, dd->ipath_kregs->kr_serdesconfig0,
1268 val);
1269 }
1270
1271 val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_xgxsconfig);
1272 if (((val >> INFINIPATH_XGXS_MDIOADDR_SHIFT) &
1273 INFINIPATH_XGXS_MDIOADDR_MASK) != 3) {
1274 val &= ~(INFINIPATH_XGXS_MDIOADDR_MASK <<
1275 INFINIPATH_XGXS_MDIOADDR_SHIFT);
1276 /*
1277 * we use address 3
1278 */
1279 val |= 3ULL << INFINIPATH_XGXS_MDIOADDR_SHIFT;
1280 change = 1;
1281 }
1282 if (val & INFINIPATH_XGXS_RESET) {
1283 /* normally true after boot */
1284 val &= ~INFINIPATH_XGXS_RESET;
1285 change = 1;
1286 }
1287 if (change)
1288 ipath_write_kreg(dd, dd->ipath_kregs->kr_xgxsconfig, val);
1289
1290 val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_serdesconfig0);
1291
1292 /* clear current and de-emphasis bits */
1293 config1 &= ~0x0ffffffff00ULL;
1294 /* set current to 20ma */
1295 config1 |= 0x00000000000ULL;
1296 /* set de-emphasis to -5.68dB */
1297 config1 |= 0x0cccc000000ULL;
1298 ipath_write_kreg(dd, dd->ipath_kregs->kr_serdesconfig1, config1);
1299
1300 ipath_cdbg(VERBOSE, "After setup: serdes status is config0=%llx "
1301 "config1=%llx, sstatus=%llx xgxs %llx\n",
1302 (unsigned long long) val, (unsigned long long) config1,
1303 (unsigned long long)
1304 ipath_read_kreg64(dd, dd->ipath_kregs->kr_serdesstatus),
1305 (unsigned long long)
1306 ipath_read_kreg64(dd, dd->ipath_kregs->kr_xgxsconfig));
1307
1308 if (!ipath_waitfor_mdio_cmdready(dd)) {
1309 ipath_write_kreg(dd, dd->ipath_kregs->kr_mdio,
1310 ipath_mdio_req(IPATH_MDIO_CMD_READ, 31,
1311 IPATH_MDIO_CTRL_XGXS_REG_8,
1312 0));
1313 if (ipath_waitfor_complete(dd, dd->ipath_kregs->kr_mdio,
1314 IPATH_MDIO_DATAVALID, &val))
1315 ipath_dbg("Never got MDIO data for XGXS status "
1316 "read\n");
1317 else
1318 ipath_cdbg(VERBOSE, "MDIO Read reg8, "
1319 "'bank' 31 %x\n", (u32) val);
1320 } else
1321 ipath_dbg("Never got MDIO cmdready for XGXS status read\n");
1322
1323 return ret; /* for now, say we always succeeded */
1324}
1325
1326/**
1327 * ipath_ht_quiet_serdes - set serdes to txidle
1328 * @dd: the infinipath device
1329 * driver is being unloaded
1330 */
1331static void ipath_ht_quiet_serdes(struct ipath_devdata *dd)
1332{
1333 u64 val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_serdesconfig0);
1334
1335 val |= INFINIPATH_SERDC0_TXIDLE;
1336 ipath_dbg("Setting TxIdleEn on serdes (config0 = %llx)\n",
1337 (unsigned long long) val);
1338 ipath_write_kreg(dd, dd->ipath_kregs->kr_serdesconfig0, val);
1339}
1340
1341static int ipath_ht_intconfig(struct ipath_devdata *dd)
1342{
1343 int ret;
1344
1345 if (!dd->ipath_intconfig) {
1346 ipath_dev_err(dd, "No interrupts enabled, couldn't setup "
1347 "interrupt address\n");
1348 ret = 1;
1349 goto bail;
1350 }
1351
1352 ipath_write_kreg(dd, dd->ipath_kregs->kr_interruptconfig,
1353 dd->ipath_intconfig); /* interrupt address */
1354 ret = 0;
1355
1356bail:
1357 return ret;
1358}
1359
1360/**
1361 * ipath_pe_put_tid - write a TID in chip
1362 * @dd: the infinipath device
1363 * @tidptr: pointer to the expected TID (in chip) to udpate
1364 * @tidtype: 0 for eager, 1 for expected
1365 * @pa: physical address of in memory buffer; ipath_tidinvalid if freeing
1366 *
1367 * This exists as a separate routine to allow for special locking etc.
1368 * It's used for both the full cleanup on exit, as well as the normal
1369 * setup and teardown.
1370 */
1371static void ipath_ht_put_tid(struct ipath_devdata *dd,
1372 u64 __iomem *tidptr, u32 type,
1373 unsigned long pa)
1374{
1375 if (pa != dd->ipath_tidinvalid) {
1376 if (unlikely((pa & ~INFINIPATH_RT_ADDR_MASK))) {
1377 dev_info(&dd->pcidev->dev,
1378 "physaddr %lx has more than "
1379 "40 bits, using only 40!!!\n", pa);
1380 pa &= INFINIPATH_RT_ADDR_MASK;
1381 }
1382 if (type == 0)
1383 pa |= dd->ipath_tidtemplate;
1384 else {
1385 /* in words (fixed, full page). */
1386 u64 lenvalid = PAGE_SIZE >> 2;
1387 lenvalid <<= INFINIPATH_RT_BUFSIZE_SHIFT;
1388 pa |= lenvalid | INFINIPATH_RT_VALID;
1389 }
1390 }
1391 if (dd->ipath_kregbase)
1392 writeq(pa, tidptr);
1393}
1394
1395/**
1396 * ipath_ht_clear_tid - clear all TID entries for a port, expected and eager
1397 * @dd: the infinipath device
1398 * @port: the port
1399 *
1400 * Used from ipath_close(), and at chip initialization.
1401 */
1402static void ipath_ht_clear_tids(struct ipath_devdata *dd, unsigned port)
1403{
1404 u64 __iomem *tidbase;
1405 int i;
1406
1407 if (!dd->ipath_kregbase)
1408 return;
1409
1410 ipath_cdbg(VERBOSE, "Invalidate TIDs for port %u\n", port);
1411
1412 /*
1413 * need to invalidate all of the expected TID entries for this
1414 * port, so we don't have valid entries that might somehow get
1415 * used (early in next use of this port, or through some bug)
1416 */
1417 tidbase = (u64 __iomem *) ((char __iomem *)(dd->ipath_kregbase) +
1418 dd->ipath_rcvtidbase +
1419 port * dd->ipath_rcvtidcnt *
1420 sizeof(*tidbase));
1421 for (i = 0; i < dd->ipath_rcvtidcnt; i++)
1422 ipath_ht_put_tid(dd, &tidbase[i], 1, dd->ipath_tidinvalid);
1423
1424 tidbase = (u64 __iomem *) ((char __iomem *)(dd->ipath_kregbase) +
1425 dd->ipath_rcvegrbase +
1426 port * dd->ipath_rcvegrcnt *
1427 sizeof(*tidbase));
1428
1429 for (i = 0; i < dd->ipath_rcvegrcnt; i++)
1430 ipath_ht_put_tid(dd, &tidbase[i], 0, dd->ipath_tidinvalid);
1431}
1432
1433/**
1434 * ipath_ht_tidtemplate - setup constants for TID updates
1435 * @dd: the infinipath device
1436 *
1437 * We setup stuff that we use a lot, to avoid calculating each time
1438 */
1439static void ipath_ht_tidtemplate(struct ipath_devdata *dd)
1440{
1441 dd->ipath_tidtemplate = dd->ipath_ibmaxlen >> 2;
1442 dd->ipath_tidtemplate <<= INFINIPATH_RT_BUFSIZE_SHIFT;
1443 dd->ipath_tidtemplate |= INFINIPATH_RT_VALID;
1444
1445 /*
1446 * work around chip errata bug 7358, by marking invalid tids
1447 * as having max length
1448 */
1449 dd->ipath_tidinvalid = (-1LL & INFINIPATH_RT_BUFSIZE_MASK) <<
1450 INFINIPATH_RT_BUFSIZE_SHIFT;
1451}
1452
1453static int ipath_ht_early_init(struct ipath_devdata *dd)
1454{
1455 u32 __iomem *piobuf;
1456 u32 pioincr, val32, egrsize;
1457 int i;
1458
1459 /*
1460 * one cache line; long IB headers will spill over into received
1461 * buffer
1462 */
1463 dd->ipath_rcvhdrentsize = 16;
1464 dd->ipath_rcvhdrsize = IPATH_DFLT_RCVHDRSIZE;
1465
1466 /*
1467 * For HT-400, we allocate a somewhat overly large eager buffer,
1468 * such that we can guarantee that we can receive the largest
1469 * packet that we can send out. To truly support a 4KB MTU,
1470 * we need to bump this to a large value. To date, other than
1471 * testing, we have never encountered an HCA that can really
1472 * send 4KB MTU packets, so we do not handle that (we'll get
1473 * errors interrupts if we ever see one).
1474 */
1475 dd->ipath_rcvegrbufsize = dd->ipath_piosize2k;
1476 egrsize = dd->ipath_rcvegrbufsize;
1477
1478 /*
1479 * the min() check here is currently a nop, but it may not
1480 * always be, depending on just how we do ipath_rcvegrbufsize
1481 */
1482 dd->ipath_ibmaxlen = min(dd->ipath_piosize2k,
1483 dd->ipath_rcvegrbufsize);
1484 dd->ipath_init_ibmaxlen = dd->ipath_ibmaxlen;
1485 ipath_ht_tidtemplate(dd);
1486
1487 /*
1488 * zero all the TID entries at startup. We do this for sanity,
1489 * in case of a previous driver crash of some kind, and also
1490 * because the chip powers up with these memories in an unknown
1491 * state. Use portcnt, not cfgports, since this is for the
1492 * full chip, not for current (possibly different) configuration
1493 * value.
1494 * Chip Errata bug 6447
1495 */
1496 for (val32 = 0; val32 < dd->ipath_portcnt; val32++)
1497 ipath_ht_clear_tids(dd, val32);
1498
1499 /*
1500 * write the pbc of each buffer, to be sure it's initialized, then
1501 * cancel all the buffers, and also abort any packets that might
1502 * have been in flight for some reason (the latter is for driver
1503 * unload/reload, but isn't a bad idea at first init). PIO send
1504 * isn't enabled at this point, so there is no danger of sending
1505 * these out on the wire.
1506 * Chip Errata bug 6610
1507 */
1508 piobuf = (u32 __iomem *) (((char __iomem *)(dd->ipath_kregbase)) +
1509 dd->ipath_piobufbase);
1510 pioincr = dd->ipath_palign / sizeof(*piobuf);
1511 for (i = 0; i < dd->ipath_piobcnt2k; i++) {
1512 /*
1513 * reasonable word count, just to init pbc
1514 */
1515 writel(16, piobuf);
1516 piobuf += pioincr;
1517 }
1518 /*
1519 * self-clearing
1520 */
1521 ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
1522 INFINIPATH_S_ABORT);
1523 return 0;
1524}
1525
1526/**
1527 * ipath_init_ht_get_base_info - set chip-specific flags for user code
1528 * @dd: the infinipath device
1529 * @kbase: ipath_base_info pointer
1530 *
1531 * We set the PCIE flag because the lower bandwidth on PCIe vs
1532 * HyperTransport can affect some user packet algorithims.
1533 */
1534static int ipath_ht_get_base_info(struct ipath_portdata *pd, void *kbase)
1535{
1536 struct ipath_base_info *kinfo = kbase;
1537
1538 kinfo->spi_runtime_flags |= IPATH_RUNTIME_HT |
1539 IPATH_RUNTIME_RCVHDR_COPY;
1540
1541 return 0;
1542}
1543
1544/**
1545 * ipath_init_ht400_funcs - set up the chip-specific function pointers
1546 * @dd: the infinipath device
1547 *
1548 * This is global, and is called directly at init to set up the
1549 * chip-specific function pointers for later use.
1550 */
1551void ipath_init_ht400_funcs(struct ipath_devdata *dd)
1552{
1553 dd->ipath_f_intrsetup = ipath_ht_intconfig;
1554 dd->ipath_f_bus = ipath_setup_ht_config;
1555 dd->ipath_f_reset = ipath_setup_ht_reset;
1556 dd->ipath_f_get_boardname = ipath_ht_boardname;
1557 dd->ipath_f_init_hwerrors = ipath_ht_init_hwerrors;
1558 dd->ipath_f_init_hwerrors = ipath_ht_init_hwerrors;
1559 dd->ipath_f_early_init = ipath_ht_early_init;
1560 dd->ipath_f_handle_hwerrors = ipath_ht_handle_hwerrors;
1561 dd->ipath_f_quiet_serdes = ipath_ht_quiet_serdes;
1562 dd->ipath_f_bringup_serdes = ipath_ht_bringup_serdes;
1563 dd->ipath_f_clear_tids = ipath_ht_clear_tids;
1564 dd->ipath_f_put_tid = ipath_ht_put_tid;
1565 dd->ipath_f_cleanup = ipath_setup_ht_cleanup;
1566 dd->ipath_f_setextled = ipath_setup_ht_setextled;
1567 dd->ipath_f_get_base_info = ipath_ht_get_base_info;
1568
1569 /*
1570 * initialize chip-specific variables
1571 */
1572 dd->ipath_f_tidtemplate = ipath_ht_tidtemplate;
1573
1574 /*
1575 * setup the register offsets, since they are different for each
1576 * chip
1577 */
1578 dd->ipath_kregs = &ipath_ht_kregs;
1579 dd->ipath_cregs = &ipath_ht_cregs;
1580
1581 /*
1582 * do very early init that is needed before ipath_f_bus is
1583 * called
1584 */
1585 ipath_init_ht_variables();
1586}
generated by cgit v1.2.2 (git 2.25.0) at 2024-09-29 03:25:19 -0400