diff options
Diffstat (limited to 'drivers/ide/pci')
-rw-r--r-- | drivers/ide/pci/aec62xx.c | 47 | ||||
-rw-r--r-- | drivers/ide/pci/alim15x3.c | 9 | ||||
-rw-r--r-- | drivers/ide/pci/cs5520.c | 5 | ||||
-rw-r--r-- | drivers/ide/pci/siimage.c | 8 | ||||
-rw-r--r-- | drivers/ide/pci/sis5513.c | 1 | ||||
-rw-r--r-- | drivers/ide/pci/via82cxxx.c | 407 |
6 files changed, 152 insertions, 325 deletions
diff --git a/drivers/ide/pci/aec62xx.c b/drivers/ide/pci/aec62xx.c index 52cadc005d72..a21b1e11eef4 100644 --- a/drivers/ide/pci/aec62xx.c +++ b/drivers/ide/pci/aec62xx.c | |||
@@ -65,23 +65,6 @@ static struct chipset_bus_clock_list_entry aec6xxx_34_base [] = { | |||
65 | #define BUSCLOCK(D) \ | 65 | #define BUSCLOCK(D) \ |
66 | ((struct chipset_bus_clock_list_entry *) pci_get_drvdata((D))) | 66 | ((struct chipset_bus_clock_list_entry *) pci_get_drvdata((D))) |
67 | 67 | ||
68 | #if 0 | ||
69 | if (dev->device == PCI_DEVICE_ID_ARTOP_ATP850UF) { | ||
70 | (void) pci_read_config_byte(dev, 0x54, &art); | ||
71 | p += sprintf(p, "DMA Mode: %s(%s)", | ||
72 | (c0&0x20)?((art&0x03)?"UDMA":" DMA"):" PIO", | ||
73 | (art&0x02)?"2":(art&0x01)?"1":"0"); | ||
74 | p += sprintf(p, " %s(%s)", | ||
75 | (c0&0x40)?((art&0x0c)?"UDMA":" DMA"):" PIO", | ||
76 | (art&0x08)?"2":(art&0x04)?"1":"0"); | ||
77 | p += sprintf(p, " %s(%s)", | ||
78 | (c1&0x20)?((art&0x30)?"UDMA":" DMA"):" PIO", | ||
79 | (art&0x20)?"2":(art&0x10)?"1":"0"); | ||
80 | p += sprintf(p, " %s(%s)\n", | ||
81 | (c1&0x40)?((art&0xc0)?"UDMA":" DMA"):" PIO", | ||
82 | (art&0x80)?"2":(art&0x40)?"1":"0"); | ||
83 | } else { | ||
84 | #endif | ||
85 | 68 | ||
86 | /* | 69 | /* |
87 | * TO DO: active tuning and correction of cards without a bios. | 70 | * TO DO: active tuning and correction of cards without a bios. |
@@ -112,13 +95,9 @@ static u8 aec62xx_ratemask (ide_drive_t *drive) | |||
112 | switch(hwif->pci_dev->device) { | 95 | switch(hwif->pci_dev->device) { |
113 | case PCI_DEVICE_ID_ARTOP_ATP865: | 96 | case PCI_DEVICE_ID_ARTOP_ATP865: |
114 | case PCI_DEVICE_ID_ARTOP_ATP865R: | 97 | case PCI_DEVICE_ID_ARTOP_ATP865R: |
115 | #if 0 | ||
116 | mode = (hwif->INB(hwif->dma_master) & 0x10) ? 4 : 3; | ||
117 | #else | ||
118 | mode = (hwif->INB(((hwif->channel) ? | 98 | mode = (hwif->INB(((hwif->channel) ? |
119 | hwif->mate->dma_status : | 99 | hwif->mate->dma_status : |
120 | hwif->dma_status)) & 0x10) ? 4 : 3; | 100 | hwif->dma_status)) & 0x10) ? 4 : 3; |
121 | #endif | ||
122 | break; | 101 | break; |
123 | case PCI_DEVICE_ID_ARTOP_ATP860: | 102 | case PCI_DEVICE_ID_ARTOP_ATP860: |
124 | case PCI_DEVICE_ID_ARTOP_ATP860R: | 103 | case PCI_DEVICE_ID_ARTOP_ATP860R: |
@@ -263,35 +242,9 @@ static int aec62xx_irq_timeout (ide_drive_t *drive) | |||
263 | case PCI_DEVICE_ID_ARTOP_ATP865: | 242 | case PCI_DEVICE_ID_ARTOP_ATP865: |
264 | case PCI_DEVICE_ID_ARTOP_ATP865R: | 243 | case PCI_DEVICE_ID_ARTOP_ATP865R: |
265 | printk(" AEC62XX time out "); | 244 | printk(" AEC62XX time out "); |
266 | #if 0 | ||
267 | { | ||
268 | int i = 0; | ||
269 | u8 reg49h = 0; | ||
270 | pci_read_config_byte(HWIF(drive)->pci_dev, 0x49, ®49h); | ||
271 | for (i=0;i<256;i++) | ||
272 | pci_write_config_byte(HWIF(drive)->pci_dev, 0x49, reg49h|0x10); | ||
273 | pci_write_config_byte(HWIF(drive)->pci_dev, 0x49, reg49h & ~0x10); | ||
274 | } | ||
275 | return 0; | ||
276 | #endif | ||
277 | default: | 245 | default: |
278 | break; | 246 | break; |
279 | } | 247 | } |
280 | #if 0 | ||
281 | { | ||
282 | ide_hwif_t *hwif = HWIF(drive); | ||
283 | struct pci_dev *dev = hwif->pci_dev; | ||
284 | u8 tmp1 = 0, tmp2 = 0, mode6 = 0; | ||
285 | |||
286 | pci_read_config_byte(dev, 0x44, &tmp1); | ||
287 | pci_read_config_byte(dev, 0x45, &tmp2); | ||
288 | printk(" AEC6280 r44=%x r45=%x ",tmp1,tmp2); | ||
289 | mode6 = HWIF(drive)->INB(((hwif->channel) ? | ||
290 | hwif->mate->dma_status : | ||
291 | hwif->dma_status)); | ||
292 | printk(" AEC6280 133=%x ", (mode6 & 0x10)); | ||
293 | } | ||
294 | #endif | ||
295 | return 0; | 248 | return 0; |
296 | } | 249 | } |
297 | 250 | ||
diff --git a/drivers/ide/pci/alim15x3.c b/drivers/ide/pci/alim15x3.c index 6cf49394a80f..cf84350efc55 100644 --- a/drivers/ide/pci/alim15x3.c +++ b/drivers/ide/pci/alim15x3.c | |||
@@ -876,10 +876,15 @@ static ide_pci_device_t ali15x3_chipset __devinitdata = { | |||
876 | 876 | ||
877 | static int __devinit alim15x3_init_one(struct pci_dev *dev, const struct pci_device_id *id) | 877 | static int __devinit alim15x3_init_one(struct pci_dev *dev, const struct pci_device_id *id) |
878 | { | 878 | { |
879 | static struct pci_device_id ati_rs100[] = { | ||
880 | { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS100) }, | ||
881 | { }, | ||
882 | }; | ||
883 | |||
879 | ide_pci_device_t *d = &ali15x3_chipset; | 884 | ide_pci_device_t *d = &ali15x3_chipset; |
880 | 885 | ||
881 | if(pci_find_device(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS100, NULL)) | 886 | if (pci_dev_present(ati_rs100)) |
882 | printk(KERN_ERR "Warning: ATI Radeon IGP Northbridge is not yet fully tested.\n"); | 887 | printk(KERN_WARNING "alim15x3: ATI Radeon IGP Northbridge is not yet fully tested.\n"); |
883 | 888 | ||
884 | #if defined(CONFIG_SPARC64) | 889 | #if defined(CONFIG_SPARC64) |
885 | d->init_hwif = init_hwif_common_ali15x3; | 890 | d->init_hwif = init_hwif_common_ali15x3; |
diff --git a/drivers/ide/pci/cs5520.c b/drivers/ide/pci/cs5520.c index 7dc24682d197..ea3c52cc8ac1 100644 --- a/drivers/ide/pci/cs5520.c +++ b/drivers/ide/pci/cs5520.c | |||
@@ -222,10 +222,9 @@ static int __devinit cs5520_init_one(struct pci_dev *dev, const struct pci_devic | |||
222 | 222 | ||
223 | /* We must not grab the entire device, it has 'ISA' space in its | 223 | /* We must not grab the entire device, it has 'ISA' space in its |
224 | BARS too and we will freak out other bits of the kernel */ | 224 | BARS too and we will freak out other bits of the kernel */ |
225 | if(pci_enable_device_bars(dev, 1<<2)) | 225 | if (pci_enable_device_bars(dev, 1<<2)) { |
226 | { | ||
227 | printk(KERN_WARNING "%s: Unable to enable 55x0.\n", d->name); | 226 | printk(KERN_WARNING "%s: Unable to enable 55x0.\n", d->name); |
228 | return 1; | 227 | return -ENODEV; |
229 | } | 228 | } |
230 | pci_set_master(dev); | 229 | pci_set_master(dev); |
231 | if (pci_set_dma_mask(dev, DMA_32BIT_MASK)) { | 230 | if (pci_set_dma_mask(dev, DMA_32BIT_MASK)) { |
diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c index 022d244f2eb0..f1ca154dd52c 100644 --- a/drivers/ide/pci/siimage.c +++ b/drivers/ide/pci/siimage.c | |||
@@ -6,7 +6,13 @@ | |||
6 | * | 6 | * |
7 | * May be copied or modified under the terms of the GNU General Public License | 7 | * May be copied or modified under the terms of the GNU General Public License |
8 | * | 8 | * |
9 | * Documentation available under NDA only | 9 | * Documentation for CMD680: |
10 | * http://gkernel.sourceforge.net/specs/sii/sii-0680a-v1.31.pdf.bz2 | ||
11 | * | ||
12 | * Documentation for SiI 3112: | ||
13 | * http://gkernel.sourceforge.net/specs/sii/3112A_SiI-DS-0095-B2.pdf.bz2 | ||
14 | * | ||
15 | * Errata and other documentation only available under NDA. | ||
10 | * | 16 | * |
11 | * | 17 | * |
12 | * FAQ Items: | 18 | * FAQ Items: |
diff --git a/drivers/ide/pci/sis5513.c b/drivers/ide/pci/sis5513.c index 16b3e2d8bfb1..75a2253a3e68 100644 --- a/drivers/ide/pci/sis5513.c +++ b/drivers/ide/pci/sis5513.c | |||
@@ -87,6 +87,7 @@ static const struct { | |||
87 | u8 chipset_family; | 87 | u8 chipset_family; |
88 | u8 flags; | 88 | u8 flags; |
89 | } SiSHostChipInfo[] = { | 89 | } SiSHostChipInfo[] = { |
90 | { "SiS965", PCI_DEVICE_ID_SI_965, ATA_133 }, | ||
90 | { "SiS745", PCI_DEVICE_ID_SI_745, ATA_100 }, | 91 | { "SiS745", PCI_DEVICE_ID_SI_745, ATA_100 }, |
91 | { "SiS735", PCI_DEVICE_ID_SI_735, ATA_100 }, | 92 | { "SiS735", PCI_DEVICE_ID_SI_735, ATA_100 }, |
92 | { "SiS733", PCI_DEVICE_ID_SI_733, ATA_100 }, | 93 | { "SiS733", PCI_DEVICE_ID_SI_733, ATA_100 }, |
diff --git a/drivers/ide/pci/via82cxxx.c b/drivers/ide/pci/via82cxxx.c index a4d099c937ff..7161ce0ef5aa 100644 --- a/drivers/ide/pci/via82cxxx.c +++ b/drivers/ide/pci/via82cxxx.c | |||
@@ -79,6 +79,7 @@ static struct via_isa_bridge { | |||
79 | u8 rev_max; | 79 | u8 rev_max; |
80 | u16 flags; | 80 | u16 flags; |
81 | } via_isa_bridges[] = { | 81 | } via_isa_bridges[] = { |
82 | { "vt6410", PCI_DEVICE_ID_VIA_6410, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, | ||
82 | { "vt8237", PCI_DEVICE_ID_VIA_8237, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, | 83 | { "vt8237", PCI_DEVICE_ID_VIA_8237, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, |
83 | { "vt8235", PCI_DEVICE_ID_VIA_8235, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, | 84 | { "vt8235", PCI_DEVICE_ID_VIA_8235, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, |
84 | { "vt8233a", PCI_DEVICE_ID_VIA_8233A, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, | 85 | { "vt8233a", PCI_DEVICE_ID_VIA_8233A, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, |
@@ -100,185 +101,14 @@ static struct via_isa_bridge { | |||
100 | { NULL } | 101 | { NULL } |
101 | }; | 102 | }; |
102 | 103 | ||
103 | static struct via_isa_bridge *via_config; | ||
104 | static unsigned int via_80w; | ||
105 | static unsigned int via_clock; | 104 | static unsigned int via_clock; |
106 | static char *via_dma[] = { "MWDMA16", "UDMA33", "UDMA66", "UDMA100", "UDMA133" }; | 105 | static char *via_dma[] = { "MWDMA16", "UDMA33", "UDMA66", "UDMA100", "UDMA133" }; |
107 | 106 | ||
108 | /* | 107 | struct via82cxxx_dev |
109 | * VIA /proc entry. | ||
110 | */ | ||
111 | |||
112 | #if defined(DISPLAY_VIA_TIMINGS) && defined(CONFIG_PROC_FS) | ||
113 | |||
114 | #include <linux/stat.h> | ||
115 | #include <linux/proc_fs.h> | ||
116 | |||
117 | static u8 via_proc = 0; | ||
118 | static unsigned long via_base; | ||
119 | static struct pci_dev *bmide_dev, *isa_dev; | ||
120 | |||
121 | static char *via_control3[] = { "No limit", "64", "128", "192" }; | ||
122 | |||
123 | #define via_print(format, arg...) p += sprintf(p, format "\n" , ## arg) | ||
124 | #define via_print_drive(name, format, arg...)\ | ||
125 | p += sprintf(p, name); for (i = 0; i < 4; i++) p += sprintf(p, format, ## arg); p += sprintf(p, "\n"); | ||
126 | |||
127 | |||
128 | /** | ||
129 | * via_get_info - generate via /proc file | ||
130 | * @buffer: buffer for data | ||
131 | * @addr: set to start of data to use | ||
132 | * @offset: current file offset | ||
133 | * @count: size of read | ||
134 | * | ||
135 | * Fills in buffer with the debugging/configuration information for | ||
136 | * the VIA chipset tuning and attached drives | ||
137 | */ | ||
138 | |||
139 | static int via_get_info(char *buffer, char **addr, off_t offset, int count) | ||
140 | { | 108 | { |
141 | int speed[4], cycle[4], setup[4], active[4], recover[4], den[4], | 109 | struct via_isa_bridge *via_config; |
142 | uen[4], udma[4], umul[4], active8b[4], recover8b[4]; | 110 | unsigned int via_80w; |
143 | struct pci_dev *dev = bmide_dev; | 111 | }; |
144 | unsigned int v, u, i; | ||
145 | int len; | ||
146 | u16 c, w; | ||
147 | u8 t, x; | ||
148 | char *p = buffer; | ||
149 | |||
150 | via_print("----------VIA BusMastering IDE Configuration" | ||
151 | "----------------"); | ||
152 | |||
153 | via_print("Driver Version: 3.38"); | ||
154 | via_print("South Bridge: VIA %s", | ||
155 | via_config->name); | ||
156 | |||
157 | pci_read_config_byte(isa_dev, PCI_REVISION_ID, &t); | ||
158 | pci_read_config_byte(dev, PCI_REVISION_ID, &x); | ||
159 | via_print("Revision: ISA %#x IDE %#x", t, x); | ||
160 | via_print("Highest DMA rate: %s", | ||
161 | via_dma[via_config->flags & VIA_UDMA]); | ||
162 | |||
163 | via_print("BM-DMA base: %#lx", via_base); | ||
164 | via_print("PCI clock: %d.%dMHz", | ||
165 | via_clock / 1000, via_clock / 100 % 10); | ||
166 | |||
167 | pci_read_config_byte(dev, VIA_MISC_1, &t); | ||
168 | via_print("Master Read Cycle IRDY: %dws", | ||
169 | (t & 64) >> 6); | ||
170 | via_print("Master Write Cycle IRDY: %dws", | ||
171 | (t & 32) >> 5); | ||
172 | via_print("BM IDE Status Register Read Retry: %s", | ||
173 | (t & 8) ? "yes" : "no"); | ||
174 | |||
175 | pci_read_config_byte(dev, VIA_MISC_3, &t); | ||
176 | via_print("Max DRDY Pulse Width: %s%s", | ||
177 | via_control3[(t & 0x03)], (t & 0x03) ? " PCI clocks" : ""); | ||
178 | |||
179 | via_print("-----------------------Primary IDE" | ||
180 | "-------Secondary IDE------"); | ||
181 | via_print("Read DMA FIFO flush: %10s%20s", | ||
182 | (t & 0x80) ? "yes" : "no", (t & 0x40) ? "yes" : "no"); | ||
183 | via_print("End Sector FIFO flush: %10s%20s", | ||
184 | (t & 0x20) ? "yes" : "no", (t & 0x10) ? "yes" : "no"); | ||
185 | |||
186 | pci_read_config_byte(dev, VIA_IDE_CONFIG, &t); | ||
187 | via_print("Prefetch Buffer: %10s%20s", | ||
188 | (t & 0x80) ? "yes" : "no", (t & 0x20) ? "yes" : "no"); | ||
189 | via_print("Post Write Buffer: %10s%20s", | ||
190 | (t & 0x40) ? "yes" : "no", (t & 0x10) ? "yes" : "no"); | ||
191 | |||
192 | pci_read_config_byte(dev, VIA_IDE_ENABLE, &t); | ||
193 | via_print("Enabled: %10s%20s", | ||
194 | (t & 0x02) ? "yes" : "no", (t & 0x01) ? "yes" : "no"); | ||
195 | |||
196 | c = inb(via_base + 0x02) | (inb(via_base + 0x0a) << 8); | ||
197 | via_print("Simplex only: %10s%20s", | ||
198 | (c & 0x80) ? "yes" : "no", (c & 0x8000) ? "yes" : "no"); | ||
199 | |||
200 | via_print("Cable Type: %10s%20s", | ||
201 | (via_80w & 1) ? "80w" : "40w", (via_80w & 2) ? "80w" : "40w"); | ||
202 | |||
203 | via_print("-------------------drive0----drive1" | ||
204 | "----drive2----drive3-----"); | ||
205 | |||
206 | pci_read_config_byte(dev, VIA_ADDRESS_SETUP, &t); | ||
207 | pci_read_config_dword(dev, VIA_DRIVE_TIMING, &v); | ||
208 | pci_read_config_word(dev, VIA_8BIT_TIMING, &w); | ||
209 | |||
210 | if (via_config->flags & VIA_UDMA) | ||
211 | pci_read_config_dword(dev, VIA_UDMA_TIMING, &u); | ||
212 | else u = 0; | ||
213 | |||
214 | for (i = 0; i < 4; i++) { | ||
215 | |||
216 | setup[i] = ((t >> ((3 - i) << 1)) & 0x3) + 1; | ||
217 | recover8b[i] = ((w >> ((1 - (i >> 1)) << 3)) & 0xf) + 1; | ||
218 | active8b[i] = ((w >> (((1 - (i >> 1)) << 3) + 4)) & 0xf) + 1; | ||
219 | active[i] = ((v >> (((3 - i) << 3) + 4)) & 0xf) + 1; | ||
220 | recover[i] = ((v >> ((3 - i) << 3)) & 0xf) + 1; | ||
221 | udma[i] = ((u >> ((3 - i) << 3)) & 0x7) + 2; | ||
222 | umul[i] = ((u >> (((3 - i) & 2) << 3)) & 0x8) ? 1 : 2; | ||
223 | uen[i] = ((u >> ((3 - i) << 3)) & 0x20); | ||
224 | den[i] = (c & ((i & 1) ? 0x40 : 0x20) << ((i & 2) << 2)); | ||
225 | |||
226 | speed[i] = 2 * via_clock / (active[i] + recover[i]); | ||
227 | cycle[i] = 1000000 * (active[i] + recover[i]) / via_clock; | ||
228 | |||
229 | if (!uen[i] || !den[i]) | ||
230 | continue; | ||
231 | |||
232 | switch (via_config->flags & VIA_UDMA) { | ||
233 | |||
234 | case VIA_UDMA_33: | ||
235 | speed[i] = 2 * via_clock / udma[i]; | ||
236 | cycle[i] = 1000000 * udma[i] / via_clock; | ||
237 | break; | ||
238 | |||
239 | case VIA_UDMA_66: | ||
240 | speed[i] = 4 * via_clock / (udma[i] * umul[i]); | ||
241 | cycle[i] = 500000 * (udma[i] * umul[i]) / via_clock; | ||
242 | break; | ||
243 | |||
244 | case VIA_UDMA_100: | ||
245 | speed[i] = 6 * via_clock / udma[i]; | ||
246 | cycle[i] = 333333 * udma[i] / via_clock; | ||
247 | break; | ||
248 | |||
249 | case VIA_UDMA_133: | ||
250 | speed[i] = 8 * via_clock / udma[i]; | ||
251 | cycle[i] = 250000 * udma[i] / via_clock; | ||
252 | break; | ||
253 | } | ||
254 | } | ||
255 | |||
256 | via_print_drive("Transfer Mode: ", "%10s", | ||
257 | den[i] ? (uen[i] ? "UDMA" : "DMA") : "PIO"); | ||
258 | |||
259 | via_print_drive("Address Setup: ", "%8dns", | ||
260 | 1000000 * setup[i] / via_clock); | ||
261 | via_print_drive("Cmd Active: ", "%8dns", | ||
262 | 1000000 * active8b[i] / via_clock); | ||
263 | via_print_drive("Cmd Recovery: ", "%8dns", | ||
264 | 1000000 * recover8b[i] / via_clock); | ||
265 | via_print_drive("Data Active: ", "%8dns", | ||
266 | 1000000 * active[i] / via_clock); | ||
267 | via_print_drive("Data Recovery: ", "%8dns", | ||
268 | 1000000 * recover[i] / via_clock); | ||
269 | via_print_drive("Cycle Time: ", "%8dns", | ||
270 | cycle[i]); | ||
271 | via_print_drive("Transfer Rate: ", "%4d.%dMB/s", | ||
272 | speed[i] / 1000, speed[i] / 100 % 10); | ||
273 | |||
274 | /* hoping it is less than 4K... */ | ||
275 | len = (p - buffer) - offset; | ||
276 | *addr = buffer + offset; | ||
277 | |||
278 | return len > count ? count : len; | ||
279 | } | ||
280 | |||
281 | #endif /* DISPLAY_VIA_TIMINGS && CONFIG_PROC_FS */ | ||
282 | 112 | ||
283 | /** | 113 | /** |
284 | * via_set_speed - write timing registers | 114 | * via_set_speed - write timing registers |
@@ -289,11 +119,13 @@ static int via_get_info(char *buffer, char **addr, off_t offset, int count) | |||
289 | * via_set_speed writes timing values to the chipset registers | 119 | * via_set_speed writes timing values to the chipset registers |
290 | */ | 120 | */ |
291 | 121 | ||
292 | static void via_set_speed(struct pci_dev *dev, u8 dn, struct ide_timing *timing) | 122 | static void via_set_speed(ide_hwif_t *hwif, u8 dn, struct ide_timing *timing) |
293 | { | 123 | { |
124 | struct pci_dev *dev = hwif->pci_dev; | ||
125 | struct via82cxxx_dev *vdev = ide_get_hwifdata(hwif); | ||
294 | u8 t; | 126 | u8 t; |
295 | 127 | ||
296 | if (~via_config->flags & VIA_BAD_AST) { | 128 | if (~vdev->via_config->flags & VIA_BAD_AST) { |
297 | pci_read_config_byte(dev, VIA_ADDRESS_SETUP, &t); | 129 | pci_read_config_byte(dev, VIA_ADDRESS_SETUP, &t); |
298 | t = (t & ~(3 << ((3 - dn) << 1))) | ((FIT(timing->setup, 1, 4) - 1) << ((3 - dn) << 1)); | 130 | t = (t & ~(3 << ((3 - dn) << 1))) | ((FIT(timing->setup, 1, 4) - 1) << ((3 - dn) << 1)); |
299 | pci_write_config_byte(dev, VIA_ADDRESS_SETUP, t); | 131 | pci_write_config_byte(dev, VIA_ADDRESS_SETUP, t); |
@@ -305,7 +137,7 @@ static void via_set_speed(struct pci_dev *dev, u8 dn, struct ide_timing *timing) | |||
305 | pci_write_config_byte(dev, VIA_DRIVE_TIMING + (3 - dn), | 137 | pci_write_config_byte(dev, VIA_DRIVE_TIMING + (3 - dn), |
306 | ((FIT(timing->active, 1, 16) - 1) << 4) | (FIT(timing->recover, 1, 16) - 1)); | 138 | ((FIT(timing->active, 1, 16) - 1) << 4) | (FIT(timing->recover, 1, 16) - 1)); |
307 | 139 | ||
308 | switch (via_config->flags & VIA_UDMA) { | 140 | switch (vdev->via_config->flags & VIA_UDMA) { |
309 | case VIA_UDMA_33: t = timing->udma ? (0xe0 | (FIT(timing->udma, 2, 5) - 2)) : 0x03; break; | 141 | case VIA_UDMA_33: t = timing->udma ? (0xe0 | (FIT(timing->udma, 2, 5) - 2)) : 0x03; break; |
310 | case VIA_UDMA_66: t = timing->udma ? (0xe8 | (FIT(timing->udma, 2, 9) - 2)) : 0x0f; break; | 142 | case VIA_UDMA_66: t = timing->udma ? (0xe8 | (FIT(timing->udma, 2, 9) - 2)) : 0x0f; break; |
311 | case VIA_UDMA_100: t = timing->udma ? (0xe0 | (FIT(timing->udma, 2, 9) - 2)) : 0x07; break; | 143 | case VIA_UDMA_100: t = timing->udma ? (0xe0 | (FIT(timing->udma, 2, 9) - 2)) : 0x07; break; |
@@ -329,6 +161,7 @@ static void via_set_speed(struct pci_dev *dev, u8 dn, struct ide_timing *timing) | |||
329 | static int via_set_drive(ide_drive_t *drive, u8 speed) | 161 | static int via_set_drive(ide_drive_t *drive, u8 speed) |
330 | { | 162 | { |
331 | ide_drive_t *peer = HWIF(drive)->drives + (~drive->dn & 1); | 163 | ide_drive_t *peer = HWIF(drive)->drives + (~drive->dn & 1); |
164 | struct via82cxxx_dev *vdev = ide_get_hwifdata(drive->hwif); | ||
332 | struct ide_timing t, p; | 165 | struct ide_timing t, p; |
333 | unsigned int T, UT; | 166 | unsigned int T, UT; |
334 | 167 | ||
@@ -337,7 +170,7 @@ static int via_set_drive(ide_drive_t *drive, u8 speed) | |||
337 | 170 | ||
338 | T = 1000000000 / via_clock; | 171 | T = 1000000000 / via_clock; |
339 | 172 | ||
340 | switch (via_config->flags & VIA_UDMA) { | 173 | switch (vdev->via_config->flags & VIA_UDMA) { |
341 | case VIA_UDMA_33: UT = T; break; | 174 | case VIA_UDMA_33: UT = T; break; |
342 | case VIA_UDMA_66: UT = T/2; break; | 175 | case VIA_UDMA_66: UT = T/2; break; |
343 | case VIA_UDMA_100: UT = T/3; break; | 176 | case VIA_UDMA_100: UT = T/3; break; |
@@ -352,7 +185,7 @@ static int via_set_drive(ide_drive_t *drive, u8 speed) | |||
352 | ide_timing_merge(&p, &t, &t, IDE_TIMING_8BIT); | 185 | ide_timing_merge(&p, &t, &t, IDE_TIMING_8BIT); |
353 | } | 186 | } |
354 | 187 | ||
355 | via_set_speed(HWIF(drive)->pci_dev, drive->dn, &t); | 188 | via_set_speed(HWIF(drive), drive->dn, &t); |
356 | 189 | ||
357 | if (!drive->init_speed) | 190 | if (!drive->init_speed) |
358 | drive->init_speed = speed; | 191 | drive->init_speed = speed; |
@@ -390,20 +223,41 @@ static void via82cxxx_tune_drive(ide_drive_t *drive, u8 pio) | |||
390 | 223 | ||
391 | static int via82cxxx_ide_dma_check (ide_drive_t *drive) | 224 | static int via82cxxx_ide_dma_check (ide_drive_t *drive) |
392 | { | 225 | { |
393 | u16 w80 = HWIF(drive)->udma_four; | 226 | ide_hwif_t *hwif = HWIF(drive); |
227 | struct via82cxxx_dev *vdev = ide_get_hwifdata(hwif); | ||
228 | u16 w80 = hwif->udma_four; | ||
394 | 229 | ||
395 | u16 speed = ide_find_best_mode(drive, | 230 | u16 speed = ide_find_best_mode(drive, |
396 | XFER_PIO | XFER_EPIO | XFER_SWDMA | XFER_MWDMA | | 231 | XFER_PIO | XFER_EPIO | XFER_SWDMA | XFER_MWDMA | |
397 | (via_config->flags & VIA_UDMA ? XFER_UDMA : 0) | | 232 | (vdev->via_config->flags & VIA_UDMA ? XFER_UDMA : 0) | |
398 | (w80 && (via_config->flags & VIA_UDMA) >= VIA_UDMA_66 ? XFER_UDMA_66 : 0) | | 233 | (w80 && (vdev->via_config->flags & VIA_UDMA) >= VIA_UDMA_66 ? XFER_UDMA_66 : 0) | |
399 | (w80 && (via_config->flags & VIA_UDMA) >= VIA_UDMA_100 ? XFER_UDMA_100 : 0) | | 234 | (w80 && (vdev->via_config->flags & VIA_UDMA) >= VIA_UDMA_100 ? XFER_UDMA_100 : 0) | |
400 | (w80 && (via_config->flags & VIA_UDMA) >= VIA_UDMA_133 ? XFER_UDMA_133 : 0)); | 235 | (w80 && (vdev->via_config->flags & VIA_UDMA) >= VIA_UDMA_133 ? XFER_UDMA_133 : 0)); |
401 | 236 | ||
402 | via_set_drive(drive, speed); | 237 | via_set_drive(drive, speed); |
403 | 238 | ||
404 | if (drive->autodma && (speed & XFER_MODE) != XFER_PIO) | 239 | if (drive->autodma && (speed & XFER_MODE) != XFER_PIO) |
405 | return HWIF(drive)->ide_dma_on(drive); | 240 | return hwif->ide_dma_on(drive); |
406 | return HWIF(drive)->ide_dma_off_quietly(drive); | 241 | return hwif->ide_dma_off_quietly(drive); |
242 | } | ||
243 | |||
244 | static struct via_isa_bridge *via_config_find(struct pci_dev **isa) | ||
245 | { | ||
246 | struct via_isa_bridge *via_config; | ||
247 | u8 t; | ||
248 | |||
249 | for (via_config = via_isa_bridges; via_config->id; via_config++) | ||
250 | if ((*isa = pci_find_device(PCI_VENDOR_ID_VIA + | ||
251 | !!(via_config->flags & VIA_BAD_ID), | ||
252 | via_config->id, NULL))) { | ||
253 | |||
254 | pci_read_config_byte(*isa, PCI_REVISION_ID, &t); | ||
255 | if (t >= via_config->rev_min && | ||
256 | t <= via_config->rev_max) | ||
257 | break; | ||
258 | } | ||
259 | |||
260 | return via_config; | ||
407 | } | 261 | } |
408 | 262 | ||
409 | /** | 263 | /** |
@@ -418,82 +272,28 @@ static int via82cxxx_ide_dma_check (ide_drive_t *drive) | |||
418 | static unsigned int __devinit init_chipset_via82cxxx(struct pci_dev *dev, const char *name) | 272 | static unsigned int __devinit init_chipset_via82cxxx(struct pci_dev *dev, const char *name) |
419 | { | 273 | { |
420 | struct pci_dev *isa = NULL; | 274 | struct pci_dev *isa = NULL; |
275 | struct via_isa_bridge *via_config; | ||
421 | u8 t, v; | 276 | u8 t, v; |
422 | unsigned int u; | 277 | unsigned int u; |
423 | int i; | ||
424 | 278 | ||
425 | /* | 279 | /* |
426 | * Find the ISA bridge to see how good the IDE is. | 280 | * Find the ISA bridge to see how good the IDE is. |
427 | */ | 281 | */ |
428 | 282 | via_config = via_config_find(&isa); | |
429 | for (via_config = via_isa_bridges; via_config->id; via_config++) | ||
430 | if ((isa = pci_find_device(PCI_VENDOR_ID_VIA + | ||
431 | !!(via_config->flags & VIA_BAD_ID), | ||
432 | via_config->id, NULL))) { | ||
433 | |||
434 | pci_read_config_byte(isa, PCI_REVISION_ID, &t); | ||
435 | if (t >= via_config->rev_min && | ||
436 | t <= via_config->rev_max) | ||
437 | break; | ||
438 | } | ||
439 | |||
440 | if (!via_config->id) { | 283 | if (!via_config->id) { |
441 | printk(KERN_WARNING "VP_IDE: Unknown VIA SouthBridge, disabling DMA.\n"); | 284 | printk(KERN_WARNING "VP_IDE: Unknown VIA SouthBridge, disabling DMA.\n"); |
442 | return -ENODEV; | 285 | return -ENODEV; |
443 | } | 286 | } |
444 | 287 | ||
445 | /* | 288 | /* |
446 | * Check 80-wire cable presence and setup Clk66. | 289 | * Setup or disable Clk66 if appropriate |
447 | */ | 290 | */ |
448 | 291 | ||
449 | switch (via_config->flags & VIA_UDMA) { | 292 | if ((via_config->flags & VIA_UDMA) == VIA_UDMA_66) { |
450 | 293 | /* Enable Clk66 */ | |
451 | case VIA_UDMA_66: | 294 | pci_read_config_dword(dev, VIA_UDMA_TIMING, &u); |
452 | /* Enable Clk66 */ | 295 | pci_write_config_dword(dev, VIA_UDMA_TIMING, u|0x80008); |
453 | pci_read_config_dword(dev, VIA_UDMA_TIMING, &u); | 296 | } else if (via_config->flags & VIA_BAD_CLK66) { |
454 | pci_write_config_dword(dev, VIA_UDMA_TIMING, u|0x80008); | ||
455 | for (i = 24; i >= 0; i -= 8) | ||
456 | if (((u >> (i & 16)) & 8) && | ||
457 | ((u >> i) & 0x20) && | ||
458 | (((u >> i) & 7) < 2)) { | ||
459 | /* | ||
460 | * 2x PCI clock and | ||
461 | * UDMA w/ < 3T/cycle | ||
462 | */ | ||
463 | via_80w |= (1 << (1 - (i >> 4))); | ||
464 | } | ||
465 | break; | ||
466 | |||
467 | case VIA_UDMA_100: | ||
468 | pci_read_config_dword(dev, VIA_UDMA_TIMING, &u); | ||
469 | for (i = 24; i >= 0; i -= 8) | ||
470 | if (((u >> i) & 0x10) || | ||
471 | (((u >> i) & 0x20) && | ||
472 | (((u >> i) & 7) < 4))) { | ||
473 | /* BIOS 80-wire bit or | ||
474 | * UDMA w/ < 60ns/cycle | ||
475 | */ | ||
476 | via_80w |= (1 << (1 - (i >> 4))); | ||
477 | } | ||
478 | break; | ||
479 | |||
480 | case VIA_UDMA_133: | ||
481 | pci_read_config_dword(dev, VIA_UDMA_TIMING, &u); | ||
482 | for (i = 24; i >= 0; i -= 8) | ||
483 | if (((u >> i) & 0x10) || | ||
484 | (((u >> i) & 0x20) && | ||
485 | (((u >> i) & 7) < 6))) { | ||
486 | /* BIOS 80-wire bit or | ||
487 | * UDMA w/ < 60ns/cycle | ||
488 | */ | ||
489 | via_80w |= (1 << (1 - (i >> 4))); | ||
490 | } | ||
491 | break; | ||
492 | |||
493 | } | ||
494 | |||
495 | /* Disable Clk66 */ | ||
496 | if (via_config->flags & VIA_BAD_CLK66) { | ||
497 | /* Would cause trouble on 596a and 686 */ | 297 | /* Would cause trouble on 596a and 686 */ |
498 | pci_read_config_dword(dev, VIA_UDMA_TIMING, &u); | 298 | pci_read_config_dword(dev, VIA_UDMA_TIMING, &u); |
499 | pci_write_config_dword(dev, VIA_UDMA_TIMING, u & ~0x80008); | 299 | pci_write_config_dword(dev, VIA_UDMA_TIMING, u & ~0x80008); |
@@ -560,26 +360,78 @@ static unsigned int __devinit init_chipset_via82cxxx(struct pci_dev *dev, const | |||
560 | via_dma[via_config->flags & VIA_UDMA], | 360 | via_dma[via_config->flags & VIA_UDMA], |
561 | pci_name(dev)); | 361 | pci_name(dev)); |
562 | 362 | ||
563 | /* | 363 | return 0; |
564 | * Setup /proc/ide/via entry. | 364 | } |
565 | */ | 365 | |
366 | /* | ||
367 | * Check and handle 80-wire cable presence | ||
368 | */ | ||
369 | static void __devinit via_cable_detect(struct pci_dev *dev, struct via82cxxx_dev *vdev) | ||
370 | { | ||
371 | unsigned int u; | ||
372 | int i; | ||
373 | pci_read_config_dword(dev, VIA_UDMA_TIMING, &u); | ||
374 | |||
375 | switch (vdev->via_config->flags & VIA_UDMA) { | ||
376 | |||
377 | case VIA_UDMA_66: | ||
378 | for (i = 24; i >= 0; i -= 8) | ||
379 | if (((u >> (i & 16)) & 8) && | ||
380 | ((u >> i) & 0x20) && | ||
381 | (((u >> i) & 7) < 2)) { | ||
382 | /* | ||
383 | * 2x PCI clock and | ||
384 | * UDMA w/ < 3T/cycle | ||
385 | */ | ||
386 | vdev->via_80w |= (1 << (1 - (i >> 4))); | ||
387 | } | ||
388 | break; | ||
389 | |||
390 | case VIA_UDMA_100: | ||
391 | for (i = 24; i >= 0; i -= 8) | ||
392 | if (((u >> i) & 0x10) || | ||
393 | (((u >> i) & 0x20) && | ||
394 | (((u >> i) & 7) < 4))) { | ||
395 | /* BIOS 80-wire bit or | ||
396 | * UDMA w/ < 60ns/cycle | ||
397 | */ | ||
398 | vdev->via_80w |= (1 << (1 - (i >> 4))); | ||
399 | } | ||
400 | break; | ||
401 | |||
402 | case VIA_UDMA_133: | ||
403 | for (i = 24; i >= 0; i -= 8) | ||
404 | if (((u >> i) & 0x10) || | ||
405 | (((u >> i) & 0x20) && | ||
406 | (((u >> i) & 7) < 6))) { | ||
407 | /* BIOS 80-wire bit or | ||
408 | * UDMA w/ < 60ns/cycle | ||
409 | */ | ||
410 | vdev->via_80w |= (1 << (1 - (i >> 4))); | ||
411 | } | ||
412 | break; | ||
566 | 413 | ||
567 | #if defined(DISPLAY_VIA_TIMINGS) && defined(CONFIG_PROC_FS) | ||
568 | if (!via_proc) { | ||
569 | via_base = pci_resource_start(dev, 4); | ||
570 | bmide_dev = dev; | ||
571 | isa_dev = isa; | ||
572 | ide_pci_create_host_proc("via", via_get_info); | ||
573 | via_proc = 1; | ||
574 | } | 414 | } |
575 | #endif /* DISPLAY_VIA_TIMINGS && CONFIG_PROC_FS */ | ||
576 | return 0; | ||
577 | } | 415 | } |
578 | 416 | ||
579 | static void __devinit init_hwif_via82cxxx(ide_hwif_t *hwif) | 417 | static void __devinit init_hwif_via82cxxx(ide_hwif_t *hwif) |
580 | { | 418 | { |
419 | struct via82cxxx_dev *vdev = kmalloc(sizeof(struct via82cxxx_dev), | ||
420 | GFP_KERNEL); | ||
421 | struct pci_dev *isa = NULL; | ||
581 | int i; | 422 | int i; |
582 | 423 | ||
424 | if (vdev == NULL) { | ||
425 | printk(KERN_ERR "VP_IDE: out of memory :(\n"); | ||
426 | return; | ||
427 | } | ||
428 | |||
429 | memset(vdev, 0, sizeof(struct via82cxxx_dev)); | ||
430 | ide_set_hwifdata(hwif, vdev); | ||
431 | |||
432 | vdev->via_config = via_config_find(&isa); | ||
433 | via_cable_detect(hwif->pci_dev, vdev); | ||
434 | |||
583 | hwif->autodma = 0; | 435 | hwif->autodma = 0; |
584 | 436 | ||
585 | hwif->tuneproc = &via82cxxx_tune_drive; | 437 | hwif->tuneproc = &via82cxxx_tune_drive; |
@@ -594,7 +446,7 @@ static void __devinit init_hwif_via82cxxx(ide_hwif_t *hwif) | |||
594 | 446 | ||
595 | for (i = 0; i < 2; i++) { | 447 | for (i = 0; i < 2; i++) { |
596 | hwif->drives[i].io_32bit = 1; | 448 | hwif->drives[i].io_32bit = 1; |
597 | hwif->drives[i].unmask = (via_config->flags & VIA_NO_UNMASK) ? 0 : 1; | 449 | hwif->drives[i].unmask = (vdev->via_config->flags & VIA_NO_UNMASK) ? 0 : 1; |
598 | hwif->drives[i].autotune = 1; | 450 | hwif->drives[i].autotune = 1; |
599 | hwif->drives[i].dn = hwif->channel * 2 + i; | 451 | hwif->drives[i].dn = hwif->channel * 2 + i; |
600 | } | 452 | } |
@@ -608,7 +460,7 @@ static void __devinit init_hwif_via82cxxx(ide_hwif_t *hwif) | |||
608 | hwif->swdma_mask = 0x07; | 460 | hwif->swdma_mask = 0x07; |
609 | 461 | ||
610 | if (!hwif->udma_four) | 462 | if (!hwif->udma_four) |
611 | hwif->udma_four = (via_80w >> hwif->channel) & 1; | 463 | hwif->udma_four = (vdev->via_80w >> hwif->channel) & 1; |
612 | hwif->ide_dma_check = &via82cxxx_ide_dma_check; | 464 | hwif->ide_dma_check = &via82cxxx_ide_dma_check; |
613 | if (!noautodma) | 465 | if (!noautodma) |
614 | hwif->autodma = 1; | 466 | hwif->autodma = 1; |
@@ -616,24 +468,35 @@ static void __devinit init_hwif_via82cxxx(ide_hwif_t *hwif) | |||
616 | hwif->drives[1].autodma = hwif->autodma; | 468 | hwif->drives[1].autodma = hwif->autodma; |
617 | } | 469 | } |
618 | 470 | ||
619 | static ide_pci_device_t via82cxxx_chipset __devinitdata = { | 471 | static ide_pci_device_t via82cxxx_chipsets[] __devinitdata = { |
620 | .name = "VP_IDE", | 472 | { /* 0 */ |
621 | .init_chipset = init_chipset_via82cxxx, | 473 | .name = "VP_IDE", |
622 | .init_hwif = init_hwif_via82cxxx, | 474 | .init_chipset = init_chipset_via82cxxx, |
623 | .channels = 2, | 475 | .init_hwif = init_hwif_via82cxxx, |
624 | .autodma = NOAUTODMA, | 476 | .channels = 2, |
625 | .enablebits = {{0x40,0x02,0x02}, {0x40,0x01,0x01}}, | 477 | .autodma = NOAUTODMA, |
626 | .bootable = ON_BOARD, | 478 | .enablebits = {{0x40,0x02,0x02}, {0x40,0x01,0x01}}, |
479 | .bootable = ON_BOARD | ||
480 | },{ /* 1 */ | ||
481 | .name = "VP_IDE", | ||
482 | .init_chipset = init_chipset_via82cxxx, | ||
483 | .init_hwif = init_hwif_via82cxxx, | ||
484 | .channels = 2, | ||
485 | .autodma = AUTODMA, | ||
486 | .enablebits = {{0x00,0x00,0x00}, {0x00,0x00,0x00}}, | ||
487 | .bootable = ON_BOARD, | ||
488 | } | ||
627 | }; | 489 | }; |
628 | 490 | ||
629 | static int __devinit via_init_one(struct pci_dev *dev, const struct pci_device_id *id) | 491 | static int __devinit via_init_one(struct pci_dev *dev, const struct pci_device_id *id) |
630 | { | 492 | { |
631 | return ide_setup_pci_device(dev, &via82cxxx_chipset); | 493 | return ide_setup_pci_device(dev, &via82cxxx_chipsets[id->driver_data]); |
632 | } | 494 | } |
633 | 495 | ||
634 | static struct pci_device_id via_pci_tbl[] = { | 496 | static struct pci_device_id via_pci_tbl[] = { |
635 | { PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C576_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, | 497 | { PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C576_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, |
636 | { PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, | 498 | { PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, |
499 | { PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_6410, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1}, | ||
637 | { 0, }, | 500 | { 0, }, |
638 | }; | 501 | }; |
639 | MODULE_DEVICE_TABLE(pci, via_pci_tbl); | 502 | MODULE_DEVICE_TABLE(pci, via_pci_tbl); |